summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-27drivers/smmstore: Remove SMMSTORE_IN_CBFSJulius Werner
The SMMSTORE_IN_CBFS option was just meant as a workaround for an attempt to backport SMMSTORE into older Chromebooks that never actually happened. All current and future users of coreboot should be using SMMSTORE in an FMAP region. The APIs needed for SMMSTORE_IN_CBFS clash with the CBFS rdev isolation needed for CBFS_VERIFICATION, so let's just get rid of it. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ia0604a4ffd20b46774631d585925311b65d5a0e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59680 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-27mb/dell/optiplex_9010/romstage.c: Add interrupt routing mapMichał Żygowski
Dumped using inteltool from the Dell BIOS version A30. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ifdc41a1e6627b68813fb264aed7e30df58fc6d54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59525 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-27superio/smsc/sch5545: Disable PS/2 lines isolation during initMichał Żygowski
Disable PS/2 data and clock isolation in order to properly initialize the PS/2 keyboard and mouse in payload/OS. These bits are set by OS via ACPI and can survive S5 state. It is necessary to clear them after an ungraceful shutdown in order to perform PS/2 controller initialization e.g. in SeaBIOS. TEST=PS/2 keyboard can always be successfully initialized in SeaBIOS on Dell OptiPlex 9010 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Iac6be095c996b357b5d4e8d75199f94a89bf73e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59673 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-27superio/smsc/sch5545: Clear PMEs in the early initMichał Żygowski
Disable PMEs and clear global PME status to avoid undesired wakeups or hangs in later stages. These bits are set by OS via ACPI can survive S5 state so it is necessary to set them back to defaults after an ungraceful shutdown. TEST=Dell OptiPlex 9010 does not hang anymore after ungraceful shutdown when configuring GPE0_EN register in southbridge LPC init Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I790cac3ce1101565b64ed54d9c6b50f5e9aa4cf6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59524 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-27security/intel/txt: Fix GETSEC checks in romstageMichał Żygowski
IA32_FEATURE_CONTROL does not need to be checked by BIOS, in fact these bits are needed only by SENTER and SINIT ACM. ACM ENTERACCS does not check these bits according to Intel SDM. Also noticed that the lock bit of IA32_FEATURE_CONTROL cannot be cleared by issuing neither global reset nor full reset on Sandybridge/Ivybridge platforms which results in a reset loop. However, check the IA32_FEATURE_CONTROL SENTER bits in ramstage where the register is properly set on all cores already. TEST=Run ACM SCLEAN on Dell OptiPlex 9010 with i7-3770/Q77 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie9103041498f557b85019a56e1252090a4fcd0c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-27security/intel/txt: Allow platforms without FIT to use Intel TXTMichał Żygowski
There is no real code or feature dependency on CPU_INTEL_FIRMWARE_INTERFACE_TABLE for Intel TXT. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I2858c8de9396449a0ee30837a98fab05570a6259 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-27security/intel/txt: Issue a global reset when TXT_RESET bit is setMichał Żygowski
Although TXT specification says to do power cycle reset if TXT_RESET is set, all Intel provided implementations issue a global reset here. TEST=Perform ungraceful shutdown after SENTER to trigger SCLEAN path on Dell OptiPlex 9010 and successfully call ACM SCLEAN. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I8ee2400fab20857ff89b14bb7b662a938b775304 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-27security/intel/txt: Use set_global_reset in txt_reset_platform if possibleMichał Żygowski
Allow to set global reset bits on other platforms which enable SOUTHBRIDGE_INTEL_COMMON_ME. In certain Intel TXT flows global reset instead of full power cycle reset is needed. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I561458044860ee5a26f7d61bcff1c407fa1533f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-27security/intel/txt: Implement GETSEC PARAMETER dumpingMichał Żygowski
Currently there is only a function that dumps GETSEC CAPABILITIES. Add dumping GETSEC PARAMETER for completeness and additional debug information. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I3b2c8337a8d86000a5b43788840d15146b662598 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59516 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-27security/intel/txt: Remove unused region deviceMichał Żygowski
Region device is no longer used to locate BIOS ACM. Use new CBFS API to map and unmap the file. Using rdev_munmap on the uninitialized region device variable causes the platform to jump to a random address. TEST=Dell OptiPlex 9010 does not raise #UD exception when Intel TXT is enabled, ACM SCHECK is successful Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I98afba35403d5d2cd9eeb7df6d1ca0171894e9d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-27security/intel/txt: Correct reporting of chipset production fuse stateMichał Żygowski
Implement the chipset production fuse state reporting as described in the Intel TXT Software Development Guide. Also fix all occurrences where the production fuse state is checked. TEST=Dell OptiPlex 9010 with i7-3770/Q77 reports the chipset is production fused Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic86c5a9e1d162630a1cf61435d1014edabf104b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59514 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-26soc/mediatek/i2c: Return negative values on errorYu-Ping Wu
Following coreboot's convention, return negative error codes from platform_i2c_transfer(). BUG=none TEST=emerge-asurada coreboot BRANCH=none Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-26util/ifdtool/Makefile: Derive from Makefile.incPatrick Georgi
Instead of maintaining two complete Makefiles, reuse the coreboot build system rules in the stand-alone Makefile. Change-Id: I5d894a1f079799478bce0bd200ac735097f3806b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59669 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-26security/intel/txt: Allow to set TXT BIOS Data Region versionMichał Żygowski
TXT BIOS Data region version is checked by Trusted Boot code. Older versions of TBoot (e.g. 1.8.2) may refuse to set up the MLE if BDR version is not known. Provide an option to set the BDR version in case an older TBoot code is used. This is very useful for platforms with TPM 1.2. TEST=Set BDR version to 4 and successfully boot QubesOS 4.0 with TBoot 1.8.2 on Dell OptiPlex 9010 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic2550bd4008559bd47de9e35f8b1c7b52e6e0f5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-26nb/intel/sandybridge: Add support for DPRMichał Żygowski
Include DPR in the memory map calculations if enabled. DPR is required for Intel TXT support. TEST=Boot Debian 10 and see the DPR memory being reserved in E820 and cbmem logs: "BIOS-e820: [mem 0x000000007fc09000-0x00000000829fffff] reserved" "TSEG base 0x80000000 size 8M" "DPR base 0x7fd00000 size 3M" Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ia22e49ba58709acfa0afe0921aa71d83cc06c129 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-26soc/medaitek/mt8186: fix wrong condition of RTC driversRex-BC Chen
We need to report error while rtc_xosc_write() returns false. TEST=error logs for RTC disappear BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I5fdf4de0383ef373dd45e8d8741aa861c9c4bdc6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Add an option for SD card initializationRex-BC Chen
There is no support for SD card on Corsola reference board, so we add a configuration to disable SD card initialization to prevent setting GPIOs in a mistaken way. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Get RAM code from ADCRex-BC Chen
On Chromebooks the RAM code is implemented by the resistor straps that we can read and decode from ADC. For Corsola the RAM code can be read from ADC channel 2 and 3. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Raise little CPU frequencyRex-BC Chen
Raise little CPU to 2GHz at romstage. TEST=check little core cpu frequency is 2GHz BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: Add VPROC12/VSRAM_PROC12 to regulator interfaceRex-BC Chen
Add VPROC12/VSRAM_PROC12 to adjust power for raising little CPU frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I59b4627220022a51a116716036a8ba0048039508 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: fix variable typeRex-BC Chen
The types of pwrap_read_field()'s return value and pwrap_write_field()'s `val` argument are u16, so correct the usage in MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26soc/mediatek/mt8186: Add support for regulator VPROC12/VSRAM_PROC12Rex-BC Chen
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366. TEST=build pass BUG=b:202871018 Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com> Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26mb/google/corsola: configure GPIOsRex-BC Chen
Configure Chromebook specific GPIOs, including EC_AP_INT, EC_IN_RW, GSC_AP_INT, EN_SPK, GPIO_AP, and GPIO_RESET. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I76bde75788889111c0a051eed731dadc9898c0e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-26ec/google/chromeec: Support 5 temperature sensorsTim Wawrzynczak
Some boards with the chrome EC will need to support more than 4 temperature sensors, so modify the number of TSRs supported when generating the ACPI code. Note that the EC memory map already has support for up to 16 TSRs, so no change is required on the EC side. BUG=b:207585491 TEST=with previous patch and some test data in brya0 overridetree.cb, dump the SSDT and verify that all of the existing Methods for TSR0-TSR3 are also added for TSR4, as well as all Notify, etc. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-26dptf: Add support for one more temperature sensorTim Wawrzynczak
Some boards may use more than 4 temperature sensors for DPTF thermal control, so this patch adds support for one more temperature sensor. BUG=b:207585491 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-26mb/google/brya/var/kano: swap TPM i2c with TS i2c for the next build phaseDavid Wu
Kano EVT will exchange i2c port for touchscreen and cr50. BUG=b:195853169 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-26util/testing: Add ifdtool to tools to be testedPatrick Georgi
Ensure that the separate Makefile doesn't break. Change-Id: I0fbe37dc01e46022c5e6de5629eb99f6b86b0b14 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-26util/ifdtool/Makefile: Fix building as standalone toolAngel Pons
Commit f1e401c6cb70 (util/cbfstool/flashmap/fmap.c: fix fmaptool endianness bugs on BE) makes use of endianness conversion macros in cbfstool's FMAP code, which is also used by ifdtool. At least on Linux, the <endian.h> header provides these helpers, but only when `__USE_MISC` is defined, which is defined in the <ctypes.h> header when `_DEFAULT_SOURCE` is defined. This was accounted for in `Makefile.inc`, but not in `Makefile`. As a result, trying to build ifdtool as a standalone tool (i.e. not as part of building a coreboot image) results in build errors because the endianness conversion macros are not defined. Define `_DEFAULT_SOURCE` in `Makefile` to fix the build errors. Change-Id: I8c2bbc07ddd87d885e2d6f5c7f2bd501e5c4e3b0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59663 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-26soc/mediatek: log watchdog statusRex-BC Chen
Reveal watchdog status value on bootblock stage. BUG=b:207646327 TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-25mb/google/brya/variants/primus: update gpios for power consumptionMalik_Hsu
In different sku, some unused GPIO pins are processed by NC for power consumption. BUG=b:196790249 TEST=emerge-brya coreboot chromeos-bootimage and check power Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25src/mb/brya: Enable crashlog on brya0Kane Chen
Enabling crashlog helps partners to debug hang issues efficiently. BUG=b:195327879 TEST=Found BERT table is created and the tcss function is ok in depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25payloads/U-Boot: Move to v2021.10Simon Glass
Move to building the latest U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I33fcfc3135e55d16b0dcd8135217bd5adcef2099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59606 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25payloads/U-Boot: Enable the frame bufferSimon Glass
U-Boot normally runs with a display if available. Enable this option so that the display shows if U-Boot supports it. Use 'select' rather than 'imply' since the CI complains. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: Ie5684c6ead30076689f43034675ff9f3531970fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/59605 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25emulation/qemu-i440fx: Use a 4MB ROM by defaultSimon Glass
At present the default ROM for for QEMU is too small for U-Boot to fit. Add a condition to catch this and expand it to a 1MB ROM. This allows booting U-Boot under emulation. It also matches the size used by other emulation boards. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25payloads/U-Boot: Correct start addressSimon Glass
At present U-Boot crashes on entry as the start address is wrong. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I65e32fbb4ffea04b99abe4dc5afccfacd06c986e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59603 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25payloads/U-Boot: Do a shallow cloneSimon Glass
We don't need all the git history. Speed up the build by doing a shallow clone. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: If31c9dd158aa23f242e4fd145449ef7502fb1ab1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59602 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25payloads/U-Boot: Use the correct output binarySimon Glass
The u-boot.bin file should be used, rather than u-boot-dtb.bin While they are often the same, the -dtb version is really just for legacy use now. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25payloads/U-Boot: Tidy up the U-Boot buildSimon Glass
This doesn't work at present, merely printing an error when U-Boot is selected as a payload. This is because it adds a file into the U-Boot tree which makes U-Boot's build system think that the tree is unclean. Update the rules to put the tag file outside the source tree. Use an out-of-tree build for U-Boot to avoid changing the source tree. Signed-off-by: Simon Glass <sjg@chromium.org> Change-Id: I24d6545b54f97afeefaca3ffed79eec2e7afacb4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59600 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-25mb/google/brya/variants/primus: add fw config probe for speaker ampMalik_Hsu
Added fw config probe for MX98360A. BUG=b:205883511 TEST=emerge-brya coreboot chromeos-bootimage and check audio function Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I2452b752ce58a5d0f1008cf187fb79ace6c4285f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/alderlake: Add ADLP 4+4+2 power configurationsCurtis Chen
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power related settings. Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for ADL-P 482(28W) and 442(45W). BUG=b:193864533 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/amd/*/data_fabric: use DF_ prefix for bit and shift definesFelix Held
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE clarifies the scope of those definitions. For consistency also add this prefix to MMIO_DST_FABRIC_ID_SHIFT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/*/include/data_fabric: make MMIO_NP definition SoC-specificFelix Held
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register is bit 12, but that has changed to bit 16 in Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I64c06b84e2c0737b259077e7932f418306638e19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/aoac: fix typo in FCH_AOAC_REF_CLK_OK_STATE definitionFelix Held
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change the name of the define to FCH_AOAC_REF_CLK_OK_STATE. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: add missing de-glitching definesFelix Held
There were only definitions for removing low, high or both glitches, but not to not remove glitches, so add this too for completeness. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: rework de-glitching definesFelix Held
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so change it to DEB_GLITCH_REMOVE which should clarify what this will do. The description for this value in the PPR/BKDG is "Remove glitch". This also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use tabs for indentationFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibf7482d20c6d27b2314ec8a31c349eb90c8a8feb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25mb/google/brya/var/felwinter: Add DPTF parameters for FelwinterJohn Su
The DPTF parameters were verified by the thermal team. BUG=b:207463762 BRANCH=brya TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25commonlib/cbmem_id.h: Add names for some IDsAngel Pons
Some IDs don't have an associated name. Add them. Change-Id: I1033dd0cecff417b65001f25f6cc4101b603bd9b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59617 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25commonlib/cbmem_id.h: Fix typo in macro nameAngel Pons
Rename `CMBMEM_ID_ACPI_HEST` to `CBMEM_ID_ACPI_HEST`. Change-Id: I3e680244c9573f566b51298462c324e062ab4657 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59616 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-25soc/amd/common/block/gpio: drop unused gpio_get_addressFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5b47324af368f81288e9e9be65fe0f1ae2fa3697 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/acpi/gpio_bank_lib: drop unused methodsFelix Held
Those methods were only in the non-common Stoneyridge GPIO ACPI code that got dropped, so drop those unused methods too. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop unused GPIO_PIN_IN/OUTFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idf00879701b223ecaca74aef2a51a1b86d2c6ce3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/stoneyridge: use SOC_AMD_COMMON_BLOCK_ACPI_GPIOFelix Held
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so we can use the common AMD SoC GPIO ACPI code. TEST=none Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: de-duplicate pin status bit defsFelix Held
De-duplicate the definitions for the pin status bit and use this new definition in both the C and the ACPI code. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop duplicate wake bit defsFelix Held
The GPIO_WAKE_* definitions are the ones that are used in the code, so drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were before this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I622673cc72107908b525a65212061062f32e13dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: use bit definitions for masksFelix Held
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK, GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code so use those instead of magic numbers. TEST=Timeless build results in identical image for amd/mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: remove unneeded line breakFelix Held
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded line breaks. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/amd/common/block/include/gpio_defs: drop 8k pullup defineFelix Held
The corresponding bit is marked as reserved in the following versions of the documentation for all SoCs using this code: Mullins: BKDG #52740 Rev 3.05 Stoneyridge: BKDG #55072 Rev 3.04 Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18 Raven2: PPR #55772 Rev 3.08 Cezanne: PPR #56569 Rev 3.03 The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as PullUpSel, but this is no longer the case in newer versions. It is unclear if this got de-featured or if it was never present in the silicon. To be consistent with the current documentation, drop this define. This patch also change the definition of GPIO_PULL_MASK to only cover the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a default value of 0 for this bit after reset, so the resulting values in the register aren't expected change. The other PPRs/BKDGs don't specify a reset value for this bit, but it's likely safe to assume that all SoCs that use the new GPIO interface use the same GPIO building block. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-25soc/intel/adl: Modify SOC_INTEL_ALDERLAKE_DEBUG_CONSENT default valueKane Chen
On ADL, we actually use debug consent 2 for soc debug by DBC Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/elkhartlake: Update SA DIDs TableRick Lee
Update SA table as per latest EDS (Doc no: 601458). Add extra SKUs accordingly. Signed-off-by: Rick Lee <rick.lee@intel.com> Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
2021-11-25mb/google/brya/var/primus: Update thermal table for primusAriel_Fang
- Add 4 TEMP_SENSORs - Configure granularity of power limits BUG=b:200836803 TEST=USE="project_primus emerge-brya coreboot" and verify it builds without error. Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com> Change-Id: Id4d8dbe678b7f0870aeffa0a0118e65de9d5c22d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-25mb/google/brya/var/kano: Update thermal tableDavid Wu
Update thermal setting from thermal team. BUG=b:205648035 TEST=build and verified by thermal team. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: If5082462b79c88ecf510f7a552381c792604366e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-25arch/{arm,arm64,ppc64,riscv}: Add noop cpu_relaxRaul E Rangel
The cpu_relax method is defined for x86. This CL adds a no-op method so that it can be used in common code. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifcb4546ceb2894eeb37589d0282b7e076d7a4747 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-25soc/intel/graphics/Kconfig: Guard optionsArthur Heymans
Change-Id: I3c252e31867e4560fb5aaf12273288f4ff18ae3d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59471 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-11-25mb/google/brya/var/kano: set power limits for thermalDavid Wu
Set power limits for kano based on CPU SKUs. BUG=b:205648035 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I25cf9be68f8981d8307b4c15ab9f65b59058fb19 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-25soc/intel/common/thermal: Refactor thermal block to improve reusabilitySubrata Banik
This patch moves common thermal API between chipsets with thermal device as PCI device and thermal device behind PMC into common file (thermal_common.c). Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC Kconfig to select as applicable for underlying chipset. +------------------------------------------------------+--------------+ | Thermal Kconfig | SoC | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL | | | till ICL | +------------------------------------------------------+--------------+ | CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards | | | ICL | +------------------------------------------------------+--------------+ Either of these two Kconfig internally selects CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-24util/testing: Give meaningful error if intel-sec-tools aren't aroundPatrick Georgi
Without manual handling, when 3rdparty/intel-sec-tools isn't around, `make what-jenkins-does` reports only go: go.mod file not found in current directory or any parent directory; see 'go help modules' which isn't meaningful or actionable. Instead check that the go.mod file exists and bail out with a better error message before trying to run `go mod vendor`. Change-Id: I035747746ca5fd54841bd67352044dde12a28185 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-24mb/google/brya/var/gimble: Enable DRIVERS_GENESYSLOGIC_GL9750Mark Hsieh
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Gimble. BUG=b:206014046 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ifc490e6e081b6a8534656417603d2916c3edcb05 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59579 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-24soc/amd/common/block/include/acpi: fix reference to main acpi includeFelix Held
commit e0844636aca974449c7257e846ec816db683d0b9 (acpi: Move ACPI table support out of arch/x86 (2/5)) moved the main acpi header file from arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the comment in here to point to the current location. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: add GPIO IRQ status registersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I585691038690f1d6855ab09f1ca5791a18cfdbfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/59590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/common/block/include/gpio_defs: use lower case in hex numbersFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icb1c7b243f655225347ba2a78c80e6e8653e8cda Reviewed-on: https://review.coreboot.org/c/coreboot/+/59589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24soc/amd/picasso,stoneyridge/acpi: use define for RTC_DATE_ALARMFelix Held
Cezanne already uses a define for this and it's better to define and use constants instead of magic values. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifa4b3b3cdb161670128b284a3396fc5a85545608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-24libpayload/tests: Fix mocks __real_<func> symbol creationJakub Czapiga
There were escape backslashes around regular expression passed to grep. Because of that, grep was returning empty results as a consequence of pattern mismatch, and thus symbols pointing to original functions were not created correctly. Change-Id: I751109735b6c56824df9a560ae989bf062a0e9a6 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-24drivers/i2c/tpm: Fix blank default statementKarthikeyan Ramasubramanian
CB:59479 introduced a blank default statement. This is treated as an error or warning on some older toolchains. Add a break statement on default case. BUG=None TEST=Build the Guybrush mainboard. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I3d034cfebc8b8ae7d7024d41b4b2207cdeb083e8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-24soc/intel/elkhartlake: Disable Intel PSE by defaultLean Sheng Tan
Disable PSE loading by default. If left enabled (current default), the EHL coreboot will end up in endless restart loop, due to FSP unable to locate PSE FW image and trigger global reset. However disabling this flag (PchPseEnable) will cause the coreboot to trigger a single reset due to CSE signal (HECI: CSE does not meet required prerequisites). The reason behind this is that FSP need to perform static disabling (power gate) to fully shut down PSE HW, and to do this will need to global reset entire system including CSE. Then PMC will power gate PSE from the start. To avoid this behavior, the best way to disable PSE is to disable via IFWI FIT softstrap (For specific detail can refer to Intel EHL coreboot MR2 release notes). With this, PMC will power gate PSE from the first cold boot and system will boot happily without single reset behavior. Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-24MAINTAINERS: Remove myselfPatrick Georgi
Change-Id: Ic9dabd0386a32dd1ec0b99e0df3f41f34effc7a3 Signed-off-by: Patrick Georgi <patrick@georgi.software> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-23libpayload: Add mock assert support for unit testing purposesJakub Czapiga
Some unit tests might require catching assert failures. This patch adds an assert() variant depending on __TEST__ define passed to unit tests. Change-Id: I7e4620400f27dbebc57c71bbf2bf9144ca65807f Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-23libpayload/tests: remove tests/include/mocks include pathJakub Czapiga
Some files in tests/include/mocks might have the same name as main libpayload include files. Remove this path from default includes to force addition of mocks/ prefix in include paths. This will help avoiding name clashes and will also make mock headers visible. Change-Id: I4baa07472f0379d56423cf7152b1ecc9a4824539 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59493 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-23mb/lenovo: Enable MEI on Sandy Bridge ThinkPadsEvgeny Zinoviev
It was already enabled on T520 and L520, but disabled on X220, T420 and T420s. On X220, it was disabled by commit 0793afe9 (mb/lenovo/x220: disable ME). I can't reproduce those issues today on linux 4.4 and linux 5.13. Also, it breaks the me_disable feature, we already have a Kconfig option to hide MEI in case of errors, and it will be hidden on disabled, recovery, firmware update paths anyway. Change-Id: I8e6d067a9c728443d00df541ac7a9a878df58b6a Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59527 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2021-11-23mb/prodrive/hermes: Number Ethernet devicesAngel Pons
The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210 Ethernet NIC, but their numbering isn't consistent with the PCIe root port function numbers. With only a M.2 SSD plugged in, Linux uses the following names: PHY 0 ---> enp6s0 PHY 1 ---> enp4s0 PHY 2 ---> enp3s0 PHY 3 ---> enp1s0 PHY 4 ---> enp2s0 These names change after adding or removing PCIe devices in slots connected to root ports that get enumerated before the NICs' root ports, because the assignment of secondary bus numbers depends on the enumeration order. Because of this, the "predictable" network interface names are not at all predictable, which is awful. To avoid this, describe the NICs using SMBIOS Type41 entries with the correct instance numbers. With this patch, Linux uses these names: PHY 0 ---> eno0 PHY 1 ---> eno1 PHY 2 ---> eno2 PHY 3 ---> eno3 PHY 4 ---> eno4 No matter what PCIe devices are present, these names don't change. Change-Id: I7a527298f84172f9135006083ad7e748dcc27911 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-23mb/dell/optiplex_9010/devicetree.cb: Enable missing GPEsMichał Żygowski
Enable PCI_EXP_EN, PME_EN and PME_B0_EN GPEs used for PCI devices. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I4480921a294f35a0dfe1e5acd90d55f6fb4c85b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-23mb/dell/optiplex_9010/Kconfig: Select Super I/O UART availabilityMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie1b270d49660fd60b6a91194167467c4453e1b6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2021-11-23mb/system76/*: Enable dGPU temp/fan reportingTim Crawford
Select the EC option on boards with dGPUs to report GPU temperature and fan data. Tested on system76/oryp6. The GPU fan speed is reported in sensors when the system is under load. system76_acpi-acpi-0 Adapter: ACPI interface CPU fan: 1985 RPM GPU fan: 2348 RPM CPU temp: +68.0°C GPU temp: +0.0°C Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23ec/system76/ec: acpi: Add dGPU thermal reportingJeremy Soller
Add a new config for boards with dGPUs to enable reporting fan duty and temperature. The dGPU is not yet enabled on any boards, so it always reports the temp as 0. However, the EC firmware does use the dGPU's fan and so reports valid information for fan speed. Change-Id: Iae1063ee6a082a77ed026178eb9471bbc2b2fadf Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-23mb/system76/*: Disable IME by CMOS optionTim Crawford
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H, and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER. The HECI device must be enabled in devicetree for switching modes to function correctly. Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-23soc/intel/alderlake: remove tmp bar assignment for cpu crashlogKane Chen
When the cpu_cl_discovery is called, coreboot actually assigns a BAR to cpu crashlog pci device. Hence, we don't need to assign a tmp BAR for cpu crashlog pci device BUG=b:195327879 TEST=Found BERT table is created and the tcss function is ok in depthcharge Change-Id: Ib7e6772be51ec4f26ef31fed6cb2bddef8ffc6be Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-23mb/google/brya/var/redrix: Disable autonomous GPIO power managementWisley Chen
With cr50 fw 0.3.22 or older version, it needs to disable autonomous GPIO power management and then can update cr50 fw successfully. BUG=b:202246591 TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage. Change-Id: Idc01ebb4d3ef990f24f18bef5424b7d6ba683d49 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58694 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-23emulation/qemu-i440fx,q35: avoid writing to ROMJulian Stecklina
libcbfs has a workaround to avoid writing to ROM areas: /* Hacky way to not load programs over read only media. The stages * that would hit this path initialize themselves. */ if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) && !CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) { This workaround is not triggered in QEMU, because BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This results in confusing (to the VMM developer) writes to read-only memory. As far as I can tell, this issue is weird but harmless, because the code does memcpy to ROM with source == destination. The concensus in the mailing list thread [1] was that it's worthwhile to be fixed regardless. [1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/ Change-Id: I5cefbc31f917021236105f7dc969118d612ac399 Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-11-23mb/google/trogdor: change pin define for quackingstickSheng-Liang Pan
change TP_EN pin to GPIO_67 for quackingstick BUG=b:206862167 BRANCH=trogdor TEST=make Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7cc1083111f46cd3489cbbb9e579c34dc972b0b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Bob Moragues <moragues@google.com>
2021-11-23drivers/genesyslogic/gl9750: Add driver for Genesys Logic GL9750Ben Chuang
The device is a PCIe Gen1 to SD 3.0 card reader controller to be used in the Chromebook. The datasheet name is GL9750S and the revision is 01. The patch disables ASPM L0s. BUG=b:206014046 TEST=Verify GL9750 enters L1 by observing CLKREQ# de-asserts. Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Change-Id: I6d60cef41baade7457a159d3ce2f8d2e6b66e71c Reviewed-on: https://review.coreboot.org/c/coreboot/+/59429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22Makefiles: Hide skipping submodule info unless V=1Martin Roth
Currently, git prints out the submodules that are being skipped twice on many builds. This patch hides that output unless the build is set to show it with `make V=1`. This is the normal way of showing the extra information during the build. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I7b5c7f1f79dcc88793a9a21f2e92e7accc5de1e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59511 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-22cpu/intel/hyperthreading: Add missing header <arch/cpu.h>Raul E Rangel
This file is using cpuid_result and cpuid(). I also removed the spinlock header since it's not used. This is what was previously providing the cpu.h header. BUG=b:179699789 TEST=none Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc3daa64562c4a4d57b678f13726509b480ba050 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2021-11-22drivers/tpm: Add firmware-power-managed DSD propertyRob Barnes
Introduce firmware-power-managed DSD ACPI property for TPM devices. This property can be checked by the kernel TPM driver to override how the TPM power states are managed. This is a tri-state flag, true, false, or unset. So an enum used to keep the flag is unset by default. When firmware-power-managed is true, the kernel driver will not send a shutdown during s2idle/s0i3 suspend. BUG=b:200578885 BRANCH=None TEST=TPM shutdown is triggered on s0ix suspend on guybrush with patched kernel Change-Id: Ia48ead856fc0c6e637a2e07a5ecc58423f599c5b Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-22soc/amd/psp_verstage: Init TPM on S0i3 resumeRob Barnes
Add option to initialize the TPM in PSP verstage during s0i3 resume. This is needed if the TPM is reset in s0i3. FSDL is handling restoring everything else, so only the minimum TPM initialization is done. Move aoac and i2c init before psp_verstrage_s0i3_resume becasue i2c needs to be ready before attempting to restore tpm. BUG=b:200578885,b:197965075 TEST=Multiple cycles of S0i3 suspend resume. ~66ms of additional delay. BRANCH=None Change-Id: Ie511928da6a8b4be62621fd2c4c31a8d1e724d48 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-22Documentation: Add warning about "private" changes on GerritPatrick Georgi
Private changes on Gerrit are a tricky beast in that they're well hidden in the UI and a few other places but still reachable under certain circumstances. Change-Id: I1c8c6cccfd023bc1d839dc5d9544204c88f89c7e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59229 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-22mb/prodrive/hermes: Rename "internal audio" settingAngel Pons
The "internal audio connection" setting is actually about the front panel audio. Rename functions and variables to reflect this. Change-Id: I1be8f68ac3e8b91bc4983dc06daa37afb7bdf926 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-22ec/google/chromeec: Add PLD to EC conn in ACPI tableWon Chung
Given EC CON and associated USB port objects, custom_pld or pld_group information is retrieved from port and added to ACPI table as _PLD field for typec connector. BUG=b:202446737 TEST=emerge-brya coreboot & SSDT dump in Brya test device Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Ibc56ecd4e8954ffaace3acd9528a064b5fa2cf6f Reviewed-on: https://review.coreboot.org/c/coreboot/+/59401 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-22mb/intel/adlrvp: Use dedicated VBT files for ADL-MBernardo Perez Priego
ADL-M has its own set of VBT files to pick during execution, this will avoid any conflict with other ADL variants. VBT files added at chrome-internal:4138272 BUG=None TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded. Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: Ibbf3f11c9277f5dcb3e12f9020f54ec843444c3f Reviewed-on: https://review.coreboot.org/c/coreboot/+/58202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2021-11-22arch/ppc64/include/arch/io.h: implement IO functionsMichał Żygowski
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> arch/ppc64/include/arch/io.h: use proper instructions for IO operations Those instrunctions are: * Load {byte,half,word} and Zero Caching Inhibited indeXed (l*zcix) * Store {byte,half,word} Caching Inhibited indeXed (st*cix) for in* and out*, respectively. Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> arch/ppc64/include/arch/io.h: implement istep reporting Change-Id: Ib65c99888ba2e616893a55dff47d2b445052fa7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/57075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-22drivers/uart: Let DRIVERS_UART_8250IO also depend on PPC64Krystian Hebel
There seems to be no operational differences between x86 and PPC64 for UART 8250. Port number is the same. References: * https://github.com/open-power/docs/issues/25 * https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/porting.md#enabling-console Tested on Talos II (https://raptorcs.com/TALOSII/). Works in QEMU as well (actually in QEMU it works even without this change somehow). Change-Id: Ib06001076b8eaa577a8d2159afea20afb610687d Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 14:04:15 +0000