summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-25autoport: add a go.mod fileIru Cai
Go 1.16 needs this when running `go build` without GO111MODULE=off. Change-Id: I9dcb134a68b7a726f1466a472a415c9558f60524 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51175 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-25cpu/intel/fit: Make make fit entries depend on fit pointerArthur Heymans
Make sure the fit pointer is set up before entries are added. Change-Id: I285fbb830a52e43cde5e8db9569a64dafb4408df Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2021-05-24mb/google/puff/var/dooly: Update CPU PSV to 85 degrees.Tony Huang
BUG=b:189053502 BRANCH=puff TEST=build image and verified by thermal team. Change-Id: Ic2337b9eabef158633c5e6dfa935ed5c8d3d76d1 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54718 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24Revert "mb/google/brya/brya0: Manually probe fw_config for DB_LTE"Tim Wawrzynczak
This reverts commit 2f8a7046bb120d96022ada1e74545f859f97521f. Reason for revert: CB:54752 makes this unnecessary Change-Id: I3ad0bcafe50e3eafb9a106720c6c9ea5cb0efc4f Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54789 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24device: Consider fw_config probing in `is_dev_enabled()`Furquan Shaikh
With the introduction of fw_config support in coreboot, it is possible for mainboards to control the state of a device (on/off) in ramstage using fw_config probe conditions. However, the device tree in immutable in all other stages and hence `is_dev_enabled()` does not really reflect the true state as in ramstage. This change adds a call to `fw_config_probe_dev()` in `is_dev_enabled()` when device tree is immutable (by checking DEVTREE_EARLY) to first check if device is disabled because of device probe conditions. If so, then it reports device as being disabled. Else, dev->enabled is used to report the device state. This allows early stages (bootblock, romstage) to use `is_dev_enabled()` to get the true state of the device by taking probe conditions into account and eliminates the need for each caller to perform their own separate probing. Change-Id: Ifede6775bda245cba199d3419aebd782dc690f2c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54752 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24fw_config: Add helper function `fw_config_probe_dev`Furquan Shaikh
This change adds a helper function `fw_config_probe_dev()` that allows the caller to check if any of the probe conditions are true for any given device. If device has no probe conditions or a matching probe condition, then it returns true and provides the matching probe condition back to caller (if provided with a valid pointer). Else, it returns false. When fw_config support is disabled, this function always returns true. Change-Id: Ic2dae338e6fbd7755feb23ca86c50c42103f349b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54751 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-24sconfig: Emit probe_list in all stagesFurquan Shaikh
`probe_list` member in `struct device` is present in all stages, however, util/sconfig emits the list only when !DEVTREE_EARLY. This change ensures that `probe_list` is emitted in all stages. In follow up changes, this is used to get the correct device state using probe conditions. Change-Id: I61f7e909d48b616ac2127a5a9f36bdf4817a5165 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-24fw_config: Return false in `fw_config_probe` in unprovisioned caseFurquan Shaikh
fw_config is unprovisioned in the factory for the first boot. This is the only case where fw_config is left unprovisioned. On first boot in factory, fw_config gets correctly provisioned by the factory toolkit. When fw_config is unprovisioned, it is not always possible to make a guess which device to enable/disable since there can be certain conflicting devices which can never be enabled at the same time. That is the reason the original implementation of fw_config library kept fw_config as 0 when it was unprovisioned. CB:47956 ("fw_config: Use UNDEFINED_FW_CONFIG to mean unprovisioned") added support for a special unprovisioned value to allow any callers to identify this factory boot condition and take any appropriate action required for this boot (Ideally, this would just involve configuring any boot devices essential to getting to OS. All other non-essential devices can be kept disabled until fw_config is properly provisioned). However, CB:47956 missed handling the `fw_config_probe()` function and resulted in silent change in behavior. This change fixes the regression introduced by CB:47956 and returns `false` in `fw_config_probe()` if fw_config is not provisioned yet. Change-Id: Ic22cd650d3eb3a6016fa2e2775ea8272405ee23b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54750 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/sasukette: Enable ELAN touchpadlizhi7
Add ELAN touchpad into devicetree for sasukette. BUG=b:188376649 BRANCH=dedede TEST=built sasukette firmware and verified touchpad function Signed-off-by: lizhi7 <lizhi7@huaqin.corp-partner.google.com> Change-Id: I898aeda936eb10ef4ead679a1c087060fad71a08 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54369 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22mb/google/dedede/var/drawcia: Support Synaptics touchpadTony Huang
Drawper would use synaptics touchpad. BUG=b:184878424 TEST=emerge-dedede coreboot and check touchpad function work. Change-Id: I2d2c205e19d8e3472e0fa7ca20fd38e381ac0de0 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-22soc/amd: reduce MCACHE size with psp_verstageKangheui Won
The default of CBFS_MCACHE_SIZE is increased to 0x4000 in CB:54146 but we have limited space on the PSP thus cannot afford it. BUG=b:177091575 BRANCH=none Signed-off-by: Kangheui Won <khwon@chrmoium.org> Change-Id: I94dd782ae00d0b18ad6dd2fc061e4318bda88579 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-22util/spd_tools/lp4x: Add new memory part to to global memory definitionDtrain Hsu
This new definition is for MT53E512M32D1NP-046 WT:B used on Cret. BUG=b:183057749 TEST=Generate SPDs Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ica5df61d96d2c4cbe62a560a53bd3bd08eb121f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54746 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-05-22mb/google/mancomb: Update AMD I2S Machine DriverIvy Jian
Update ACPI HID to 10025682 for Machine driver probe BUG=b:187912480 TEST=Build and boot to OS in Mancomb. Ensure that the sound card probed. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I5dc87c7a8fb876adc26165655f8f2d4157aa68c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54749 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-22soc/amd/cezanne,picasso/reset: use byte I/O read for NCP_ERRFelix Held
NCP_ERR is a 1 byte register in I/O-space, so use inb and not inw. The variable the result gets assigned to is also a uint8_t. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9fd8c139004111d6227c0316ba2a8b0281541654 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-22util/crossgcc: Update acpica to 20210331Patrick Georgi
Change-Id: Ic517a2b9c9b7122d2a65f67380d3ce368303d725 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2021-05-21mainboard/google/brya: Add SCI event EC_HOST_EVENT_USB_MUXmadhusudanarao amara
Send USB_MUX host event for the connect/disconnect type C devices. BUG=none BRANCH=None TEST=manual tested USB connect/disconnect Change-Id: I5a720e1f1ea42f200e0e4c98f42894e4b92c67f8 Signed-off-by: madhusudanarao amara <madhusudanarao.amara@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54725 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Sooraj Govindan <sooraj.govindan@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mb/google/mancomb: Enable S0ixKarthikeyan Ramasubramanian
BUG=b:188446049 TEST=Build and boot to OS in mancomb. Ensure that the system can suspend and resume successfully. Ensure that the sleep state GPIOs are reflecting the state as expected. Change-Id: I43e86a07075fe66f89c2c5665adc209e985e4f04 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-05-21soc/intel/common: Add Alder Lake device IDsSumeet R Pawnikar
Add Alder Lake specific Host and Graphics device IDs. As per latest document number: 619501, these IDs got an update. Change-Id: I548a903714ccc7470f1425ac67c0c66522437365 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54674 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21soc/amd/cezanne,common,picasso: use BERT region reserved by FSP driverFelix Held
commit ce0e2a014009390c4527e064efb59260ef4d3a3b (drivers/intel/fsp2_0: use FSP to allocate APEI BERT memory region) adds a mechanism to reserve the BERT region inside the coreboot code, so we can get rid of the workaround to reserve it in the FSP and return the location in a HOB. mcfg->bert_size defaults to 0 which makes the FSP not generate the corresponding HOB, but that field is planned to be removed at least on Cezanne, so don't explicitly set it to 0. BUG=b:169934025 TEST=BERT table that gets generated in a follow-up patch for Picasso points to expected BERT region and Linux is able to access, decode and display it. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaca89b47793bf9982181560f026459a18e7db134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52584 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21security/tpm/tspi: Always measure the cache to pcrArthur Heymans
Most of the time when INIT_BOOTBLOCK is selected, the cache should be empty here anyway, so this is a no-op. But when it's not empty that means the bootblock loaded some other file before it got to the TPM init part (which is possible, for example, if hooks like bootblock_soc_init() load something). Change-Id: I4aea86c094abc951d7670838f12371fddaffaa90 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-05-21soc/intel/common: Add function to lpc_lib to return PIRQ routingTim Wawrzynczak
In order to fill out static entries for a _PRT table for soc/intel/common, the PIRQ<->IRQ mapping is required. This patch adds a function lpc_get_pch_pirq_routing() which returns this mapping. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: Ib215fba54573c50a88aa4584442bd8d27ae017be Reviewed-on: https://review.coreboot.org/c/coreboot/+/50858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-21mb/google/dedede/var/drawcia: Support HDMI VBT for DrawperTony Huang
Drawper support LTE+HDMI, so use DB_PORTS_1A_HDMI_LTE to select HDMI VBT output for it. BUG=b:186393848 BRANCH=dedede TEST=Build and boot to OS check HDMI output works. Change-Id: Ibf34cce1e3cbfce8a71dce880c50f85db9295b1e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-21mb/google/dedede: Add DB_PORTS FW_CONFIG in devicetreeTony Huang
DB_PORTS_1C_1A_LTE 6 DB_PORTS_1C 7 DB_PORTS_1A_HDMI_LTE 8 BUG=b:186393848 BRANCH=dedede TEST=build pass Change-Id: I8632960d7e538402bf033d07402116dac848f5ac Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-21security/tpm/tspi/crtm: Fix FMAP TPM PCRArthur Heymans
TPM_RUNTIME_DATA_PCR is for "for measuring data which changes during runtime e.g. CMOS, NVRAM..." according to comments. FMAP does not change during runtime. Change-Id: I23e61a2dc25cd1c1343fb438febaf8771d1c0621 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-05-21mb/google/mancomb: Enable some PCIe power saving featuresMatt Papageorge
Enable ASPM, Common Clock and Clock Power Managment. Accomplish this by adding the options in the platform Kconfig as well as dxio descriptors. BUG=b:187743927 TEST=Boot to ChromeOS and see ASPM, CC and Clock PM enabled with lspci Change-Id: I9d6e606763798afc6b797d7d24ee7cae09f9e33f Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54681 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-21mb/google/guybrush: Enable some PCIe power saving featuresMatt Papageorge
Enable ASPM, Common Clock and Clock Power Managment. Accomplish this by adding the options in the platform Kconfig as well as dxio descriptors. BUG=b:187743927 TEST=Boot to ChromeOS and see ASPM, CC and Clock PM enabled with lspci Change-Id: Iefc4b5b489cb8caf59f21dd4333d7af66ba47c32 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54282 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20Doc/releases: Mention that Asus H61 boards got squashedAngel Pons
Not physically squashed, the coreboot code got turned into a variant setup with override devicetrees to drop redundant boilerplate. Change-Id: I7ae5530d2603d6d108ef3829004de7e1cad130f9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2021-05-20mb/google/puff/var/dooly: Add gpio_keys for mic mute switchBen Zhang
UI monitors this input event and sends global mic mute command to CRAS when the physical switch is toggled. BUG=b:184593945 BRANCH=puff TEST=build image and verify with evtest on DUT. Apply crrev.com/c/2870806 with chrome cmdline flag and verify global mute is triggered. Verify sequences of switch toggle and suspend/resume. Change-Id: Id89947885fdd96c5b5d598bda6db127daf298dc3 Signed-off-by: Ben Zhang <benzh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54333 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20drivers/gpio_keys: Add SW_MUTE_DEVICEBen Zhang
Added SW_MUTE_DEVICE event type for mic mute switch. BUG=b:184593945 BRANCH=puff TEST=build image and verify with evtest on puff: /dev/input/event3: mic_mute_switch UI event_device_info receives the proper name. Change-Id: I09c52dc3df63e266c73741b102a22f8a2b896791 Signed-off-by: Ben Zhang <benzh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20drivers/gpio_keys: Add label to set input device nameBen Zhang
Added the label field to the gpio_keys _DSD so that the kernel driver can use a meaningful name instead of the generic _HID PRP0001. BUG=b:184593945 BRANCH=puff TEST=build image and verify with evtest on puff: /dev/input/event3: mic_mute_switch UI event_device_info receives the proper name. Change-Id: I0377851b9cf23bab31930aed6e7de91b4ac3505b Signed-off-by: Ben Zhang <benzh@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/asus/p8z77-series: unselect MAINBOARD_HAS_TPM1 from p8z77-m_proBill XIE
MAINBOARD_HAS_TPM1 should not be selected, since the module is replaceable. Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Change-Id: Ia3790154476b0db54f37e1f3abb91ba5ee891c31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-m_pro: Switch to overridetree setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8Z77-M PRO remains identical when not adding the .config file in it. Change-Id: I7f1d93e500153a9821e7ddb693d77c864c879f0d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54414 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-v_lx2: Extract overridetreeAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8Z77-V LX2 remains identical when not adding the .config file in it. Change-Id: Ia84b07f5fec3c2969134b0d0bc39248d50ac04ff Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-series: Always select `INTEL_INT15`Angel Pons
The mainboard.c guard was only added to preserve reproducibility when unifying the boards. The `install_intel_vga_int15_handler` function does nothing when `VGA_ROM_RUN` is not selected. Remove the guard and always select `INTEL_INT15` for simplicity. Change-Id: If38ca49dba81921a3e7abe22542ae74d8914a38d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-m_pro: Transform into variantAngel Pons
To preserve reproducibility, temporarily guard mainboard.c contents. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8Z77-M PRO remains identical when not adding the .config file in it. Change-Id: I05e272690ca78f6b9e22b1db1c36cb9e5a7afe3c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-m_pro: Reorder `_PTS` and `_WAK`Angel Pons
Done to preserve reproducibility when switching to a variant setup. Change-Id: I4f3663d3b58c6245c9b73d370a48b8745ea5b95b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8z77-v_lx2: Transform into variant setupAngel Pons
Get ready to squash all Asus Z77 boards together, so as to factor out some redundant code. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8Z77-V LX2 remains identical when not adding the .config file in it. Change-Id: I701ec4adbc65732ffc0a60d311bf07bf7f414ebf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8h61-m_lx: Switch to overridetree setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX remains identical when not adding the .config file in it. Change-Id: I3142773e8c8f11f27f7926933097ffde8ba241e2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54390 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/asus/h61m-cs: Switch to overridetree setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus H61M-CS remains identical when not adding the .config file in it. Change-Id: I34eb5387fddcb3505c9218b20b706b773e979b0e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/asus/p8h61-m_pro: Switch to overridetree setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M PRO remains identical when not adding the .config file in it. Change-Id: I443d3823e32a246a89ff12e52a0301b2c252e23b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54388 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/asus/p8h61-m_lx3_r2_0: Extract overridetreeAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX3 R2.0 remains identical when not adding the .config file in it. Change-Id: I989f69d000a38a7b1f4e0832341aa347cc0bfe98 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54387 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/asus/p8h61-m_lx3_r2_0: List all PCH PCIe RPs in devicetreeAngel Pons
Done to preserve reproducibility when switching to overridetrees. The H61 PCH only supports 6 PCIe root ports anyway. Change-Id: I926d62dda512e435d44c0646083c7722427dc80b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54386 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/asus/h61-series: Always select `INTEL_INT15`Angel Pons
The mainboard.c guard was only added to preserve reproducibility when unifying the boards. The `install_intel_vga_int15_handler` function does nothing when `VGA_ROM_RUN` is not selected. Remove the guard and always select `INTEL_INT15` for simplicity. Change-Id: If51a0ab1c57b0856018a62cf669e5d1b53e5333c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54379 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/h61-series: Consolidate devicetree SATA optionsAngel Pons
The H61 PCH only supports 4 SATA ports, and does not support Gen3. Change-Id: I3e060ca6904fd6c773c322988a17bbca28333a3d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54378 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/h61-series: Relicense devicetrees as GPL-2.0-or-laterAngel Pons
I added these devicetrees in commit 65ddbb720b1 (mb/asus/p8h61-m_pro: Add new mainboard) and commit fe7c2b996bbb (mb/asus/p8h61-m_lx3_r2_0: Add new mainboard). To ease licensing matters when transforming these boards to use overridetrees, relicense the devicetrees so that all of them use the GPL-2.0-or-later license. Change-Id: Id26d0d9dd6cbb81d6a6a263feab7f36ddb4ff6e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-20mb/asus/p8h61-m_lx/devicetree.cb: Rewrite number in hexAngel Pons
Done for consistency with the other variants. Tested with BUILD_TIMELESS=1, Asus P8H61-M LX remains identical. Change-Id: I440706f6fa11d3c2410c445cb7e946c063578c4e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-05-20mb/asus/p8h61-m_lx: Transform into variant setupAngel Pons
Handle some differences in the DSDT code using preprocessor. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX remains identical when not adding the .config file in it. Change-Id: I2a02f32dfd9fa9c1adce3baf0d279ea19db5883f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2021-05-20soc/intel/xeon_sp: Skip locking down TXT related registersArthur Heymans
When locking down TXT is skipped, e.g. to do error injection, locking down DMI3 and IIO DFX related TXT registers should also be skipped. Change-Id: Ieef25c02ec103eaef65d8b44467ccb9e6917bb6c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50238 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Rocky Phagura Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/ocp/deltalake: Implement skipping TXT lockdown via VPDArthur Heymans
This allows to skip TXT Lockdown via "skip_intel_txt_lockdown" VPD parameter. Change-Id: Ic5daf96bdda9c36054c410b07b08bcd3482d777c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rocky Phagura Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-20security/intel/txt: Add weak function to skip TXT lockdownArthur Heymans
RAS error injection requires TXT and other related lockdown steps to be skipped. Change-Id: If9193a03be7e1345740ddc705f20dd4d05f3af26 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-05-20soc/intel/broadwell: Use Lynx Point IOBP codeAngel Pons
Change-Id: I89832dd6089e1961b4ffdb5661dc98b26a5cb0a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52515 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20sb/intel/lynxpoint: Add pch_iobp_exec() functionAngel Pons
Taken from Broadwell. A follow-up will make Broadwell use the IOBP code from Lynx Point. Change-Id: Iacc90930ad4c34777c8f1af8b69c060c51a123b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52514 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20sb/intel/lynxpoint: Relocate SATA clock gating writeAngel Pons
Do it in the same place as Broadwell. Tested on out-of-tree Compal LA-A992P, SATA still works. Change-Id: I50bd951af52d03ad986dbf4bf70bdae348fa994b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47034 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/mancomb: Enable GFX HDA deviceIvy Jian
Enable Display Controller Engine Audio endpoint to enable HDMI audio. BUG=b:186479763 TEST=Build and boot to OS in mancomb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I47cf9a9dc73fd47e390b079bb9eaa14dc364404a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20mb/google/guybrush: Add SoC thermal zoneRaul E Rangel
The time constant values were taken from the zork thermal.asl. BUG=b:186166365 TEST=Boot guybrush to OS and verify logs look correct thermal-0294 thermal_trips_update : Found critical threshold [3641] thermal-0321 thermal_trips_update : No hot threshold thermal-0200 thermal_get_temperatur: Temperature is 3060 dK thermal-0219 thermal_get_polling_fr: Polling frequency is 100 dS thermal-0200 thermal_get_temperatur: Temperature is 3060 dK thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TM00] (33 C) thermal-0200 thermal_get_temperatur: Temperature is 3070 dK Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iaeed75bdaa16b117d0fa7144ede98db1388f74f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20ec/google/chromeec: Implement support for DRIVERS_ACPI_THERMAL_ZONERaul E Rangel
This adds the required method to access temperature data from the ChromeEC. BUG=b:186166365 TEST=Boot guybrush to the OS and verify temperatures $ tail /sys/devices/virtual/thermal/thermal_zone*/temp ==> /sys/devices/virtual/thermal/thermal_zone0/temp <== 31900 ==> /sys/devices/virtual/thermal/thermal_zone1/temp <== 34900 ==> /sys/devices/virtual/thermal/thermal_zone2/temp <== 31900 ==> /sys/devices/virtual/thermal/thermal_zone3/temp <== 33900 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I418b6691a7d00a4c2d89c9c1fe8f9416602be0f1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54133 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20drivers/acpi: Add a chip driver to generate thermal zoneRaul E Rangel
Given the following device tree entry: chip drivers/acpi/thermal_zone register "description" = ""CPU"" use chrome_ec as temperature_controller register "sensor_id" = "0" register "polling_period" = "10" register "critical_temperature" = "91" register "passive_config" = "{ .temperature = 85, }" register "use_acpi1_thermal_zone_scope" = "true" device generic 0 on end end It will generate the following: Scope (\_TZ) { ThermalZone (TM00) { Name (_STR, "CPU") // _STR: Description String Name (_RTV, Zero) // _RTV: Relative Temperature Values Name (_TZP, 0x64) // _TZP: Thermal Zone Polling Name (_CRT, 0x0E39) // _CRT: Critical Temperature Name (_PSV, 0x0DFD) // _PSV: Passive Temperature Name (_PSL, Package (0x10) // _PSL: Passive List { \_SB.CP00, \_SB.CP01, \_SB.CP02, \_SB.CP03, \_SB.CP04, \_SB.CP05, \_SB.CP06, \_SB.CP07, \_SB.CP08, \_SB.CP09, }) Name (_TC1, 0x02) // _TC1: Thermal Constant 1 Name (_TC2, 0x05) // _TC2: Thermal Constant 2 Name (_TSP, 0x14) // _TSP: Thermal Sampling Period Method (_TMP, 0, Serialized) // _TMP: Temperature { Return (\_SB.PCI0.LPCB.EC0.CREC.TMP (Zero)) } } } BUG=b:186166365 TEST=Boot guybrush to OS and verify thermal zone works Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iee2a42db749f18eef6c3f73cdbb3441567301e5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/54132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20mb/asus/f2a85-m_pro: Set resources for 2e.bPaul Menzel
The v4 resource allocator logs the error below: […] === Resource allocator: DOMAIN: 0000 - Pass 2 (allocating resources) === DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff update_constraints: PCI: 00:14.3 10000000 base 00000000 limit 00000fff io (fixed) update_constraints: PNP: 002e.2 60 base 000003f8 limit 000003ff io (fixed) update_constraints: PNP: 002e.5 60 base 00000060 limit 00000060 io (fixed) update_constraints: PNP: 002e.5 62 base 00000064 limit 00000064 io (fixed) update_constraints: PNP: 002e.b 60 base 00000290 limit 00000291 io (fixed) DOMAIN: 0000: Resource ranges: * Base: 1000, Size: f000, Tag: 100 PCI: 00:01.0 14 * [0x1000 - 0x10ff] limit: 10ff io PCI: 00:11.0 20 * [0x1100 - 0x110f] limit: 110f io PCI: 00:11.0 10 * [0x1110 - 0x1117] limit: 1117 io PCI: 00:11.0 18 * [0x1118 - 0x111f] limit: 111f io PCI: 00:11.0 14 * [0x1120 - 0x1123] limit: 1123 io PCI: 00:11.0 1c * [0x1124 - 0x1127] limit: 1127 io ERROR: Resource didn't fit!!! PNP: 002e.b 62 * size: 0x2 limit: fff io DOMAIN: 0000 io: base: 0 size: 0 align: 0 gran: 0 limit: ffff done […] === Resource allocator: DOMAIN: 0000 - resource allocation complete === […] PNP: 002e.b 60 <- [0x0000000290 - 0x0000000291] size 0x00000002 gran 0x01 io PNP: 002e.b e2 <- [0x000000007f - 0x000000007e] size 0x00000000 gran 0x00 irq PNP: 002e.b e4 <- [0x00000000f1 - 0x00000000f0] size 0x00000000 gran 0x00 irq ERROR: PNP: 002e.b 62 io size: 0x0000000002 not assigned in devicetree ERROR: PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree WARNING: PNP: 002e.b f0 irq size: 0x0000000001 not assigned in devicetree […] So configure it, to use the resources from port 0. TEST=With CB:54669 boot Asus F2A85-M PRO to SeaBIOS/GRUB and Debian’s Linux 5.10.28 Solution-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Change-Id: Ibfedca96e4b5ad17f99bc84e2fbf7d0a6aad4484 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54670 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/kukui: Add rt1015 support for katsuSunway
Modify the value of "SPEAKER_GPIO_NAME" in katsu as rt1015p sdb BUG=None BRANCH=kukui TEST=Speaker can work normally in katsu during firmware stage Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: Ib3672383ab34bb07b4e5eb7f7e8b4549e13c67b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54642 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20soc/amd/common: Show espi init in logMartin Roth
BUG=None TEST=See espi init messages in the log. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I9f856402ed9a026427d3529e6d61450b0623fe48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/sarien/var/sarien/hda_verb: Indent unindented commentsPaul Menzel
Change-Id: I2d08fa7506c6230491273f57ee0116927b29abe3 Fixes: 95370e1f ("mb/google/sarien: Add HD Audio verb table") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/drallion/var/drallion/hda_verb: Correct codec name in commentPaul Menzel
Correct the Realtek ALC3254 codec name in the comment. The name is used in the original commit message, and is also present in the Linux kernel (`sound/pci/hda/patch_realtek.c`). The file was an exact copy of `src/mainboard/google/sarien/variants/arcada/include/variant/hda_verb.h` added in commit 95370e1f (mb/google/sarien: Add HD Audio verb table). Change-Id: I43cd73a14e07eb4518e3d44b6f81dff5016da721 Fixes: e3443d87 ("mb/google/drallion: Add new mainboard") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20mb/google/sarien/var/arcada/hda_verb: Correct codec name in commentPaul Menzel
Correct the Realtek ALC3254 codec name in the comment. The name is used in the original commit message, and is also present in the Linux kernel (`sound/pci/hda/patch_realtek.c`). Change-Id: Id8a099297bd8bcebf9734e1beee2449fdcca75c5 Fixes: 95370e1f ("mb/google/sarien: Add HD Audio verb table") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-20soc/intel/xeon_sp: Remove superfluous printkArthur Heymans
This debug output is not very useful. If CONFIG_BOOTBLOCK_CONSOLE is enabled there will already be something else printed on the console before this. Change-Id: I7c6013805497604bb6a42ed4f9fdc594a73c28f1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Rocky Phagura
2021-05-20mb/google/mancomb: Enable AMD I2S Machine DriverIvy Jian
Enable AMD I2S machine driver and configure the devicetree with HID information so that the machine driver ACPI objects can be passed to the kernel. Also configure Audio Co-processor(ACP) to operate in I2S TDM mode. BUG=b:187860242 TEST=Build and boot to OS in Guybrush. Ensure that the ACPD device is enabled in the appropriate scope in SSDT. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I528f90d81a418236e512a1e0840ff44c3a3a983e Reviewed-on: https://review.coreboot.org/c/coreboot/+/54549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-05-20baytrail: Factor out INT15 handlerAngel Pons
The handler is the same on all Bay Trail mainboards. Factor it out. Change-Id: Ia1b6faaca4792cda5f14948d23498182bf4bb2c3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54415 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Máté Kukri <kukri.mate@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-20mb/google/dedede: move discrete TPM in overridetree for lalalaAaron Durbin
Move discrete TPM in the devicetree to avoid emitting the following message: "Using default TPM ACPI path: '\_SB_.PCI0.LPCB'" There is no corresonding ACPI device for 1f.5 PCI device. Therefore, move the discrete TPM to a device that has the corresponding ACPI device node. Functionality should remain the same. BUG=b:187518267 Change-Id: Ie9ec70336d5651c87f06f8b357abd1bfdb1cc06b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aseda Aboagye <aaboagye@google.com>
2021-05-19herobrine: Enable macronix SPI configShaik Sajida Bhanu
Enable macronix SPI config on herobrine board. BUG=b:182963902 Change-Id: I505ee95d9f2ca16baf244135b3e2e8fe72f93491 Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19sc7280: Reserve wlan & wpss dram memory regionsRavi Kumar Bokka
Change-Id: Ic98b5d08a0a7b3f772582bf85d94f901a7c53010 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19sc7280: memlayout changes for QCSDI & WMM featuresamrab
Change-Id: If5ebcc9a35e0b86321045ef44bb4874144c6402f Signed-off-by: Sudheer Kumar Amrabadi <samrab@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19sc7280: add qclib supportRavi Kumar Bokka
* Qclib_Ver: BOOT.MXF.1.0-00745-KODIAKLC-2 * Chipcode_Release_Tag: r00003.1 Change-Id: I2d400f0ad96dbef2e45cc1f11ed17ea95fc60d16 Signed-off-by: Sudheer Kumar Amrabadi <samrabad@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-05-19tests: improve code coverage supportPaul Fagerburg
Fix the exclusion path for lcov; it should exclude the directory with source code, not object files. Use the COV environment variable to * control whether we build for coverage or not * select the output directory Add a separate target for generating the report, so we can get a report for all of the tests together or just a single test. Add documentation. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I2bd2bfdedfab291aabeaa968c10b17e9b61c9c0a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-05-19soc/amd/common/block/espi_util: Work around in-band reset race conditionRaul E Rangel
When performing an in-band reset the host controller and the peripheral can have mismatched IO configs. i.e., The eSPI peripheral can be in IO-4 mode while, the eSPI host will be in IO-1. This results in the peripheral getting invalid packets and thus not responding. This causes the NO_RESPONSE status bit to be set and cause eSPI init to fail. If the peripheral is alerting when we perform an in-band reset, there is a race condition in espi_send_command. 1) espi_send_command clears the interrupt status. 2) eSPI host controller hardware notices the alert and sends a GET_STATUS. 3) espi_send_command writes the in-band reset command. 4) eSPI hardware enqueues the in-band reset until GET_STATUS is complete. 5) GET_STATUS fails with NO_RESPONSE and sets the interrupt status. 6) eSPI hardware performs in-band reset. 7) espi_send_command checks the status and sees a NO_RESPONSE bit. As a workaround we allow the NO_RESPONSE status code when we perform an in-band reset. BUG=b:186135022 TEST=suspend_stress_test and S5->S0 tests on guybrush and zork. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I71271377f20eaf29032214be98794e1645d9b70a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-05-19soc/amd/cezanne/fch: add PCIe GPP clock generator configuration settingsFelix Held
I'm not 100% sure if this should rather be duplicated from Picasso or commonized. Checked with the docs and this won't be compatible with Stoneyridge and one future product's PPR lacked the corresponding register. Some other chip has a compatible register layout, but a different number of PCIe GPP clock outputs, so the common code would need to use some SoC-dependent defines and possibly a SoC-specific lookup table for the mapping which is also not that great. TEST=Checked Cezanne PPR Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b6d0cb8d7eb0288d8a18fcb975dc377b2c6846a Reviewed-on: https://review.coreboot.org/c/coreboot/+/54685 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19soc/amd/picasso: move gpp_clk_req_setting definition to chip.hFelix Held
Since this enum is only used for the devicetree settings and not for the hardware itself, move it from the southbridge header to the chip one. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0907fc5cba9315fec5fabff67d279c6d95d1c9f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54684 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-19mb/google/brya/brya0: Manually probe fw_config for DB_LTETim Wawrzynczak
In order to use the USB WWAN module in USB mode (as opposed to PCIe), the PCIe RP must be turned off at the FSP level. The `probe` statement in the devicetree unfortunately takes effect too late, because the UPDs for disabling/enabling PCIE RP belong to FSP-M (romstage), whereas fw_config probing for devicetree is done in ramstage. Add a new variant-specific file which will handle manually setting the UPD based on FW_CONFIG instead. BUG=b:180166408 TEST=set CBI FW_CONFIG field to LTE_USB, see message in console, set field to LTE_PCIE, do not see message in console. Change-Id: Ica2f64ec99fa547e233012dc201577a14f6aa7d7 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54633 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18ec/google/chromeec: Provide EC access for Retimer firmware upgradeJohn Zhao
coreboot needs to access EC RFWU entry in order to suspend and resume PD and modes setting. This change adds ec_retimer_fw_update implementation for retimer firmware upgrade. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ib937d8bd72fc39487854773573b435bf2add672a Reviewed-on: https://review.coreboot.org/c/coreboot/+/52713 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/intel/shadowmountain: Update mainboard propertiesJohn Zhao
This changes updates mainboard properties by adding DFP number and power_gpio for each DFP. BUG=b:186521258 TEST=None Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I29480bf77f7df9890bef64a5f9f02074a34dc131 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/google/volteer: Update mainboard propertiesJohn Zhao
This changes updates mainboard properties by adding DFP number, PLD and power_gpio for each DFP. BUG=b:186521258 TEST=Validated Retimer firmware upgrade along with upstream kernel under no device attached scenario. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I18f29ce5f8450a8b0f8208a60b8b607f9f0d8817 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52714 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18drivers/intel/usb4: Update driver to support Retimer firmware upgradeJohn Zhao
Along with upstream kernel for Retimer firmware upgrade, coreboot provides DFPx under host router where each DFP has its PLD and DSM. The DFPx's functions encapsulates power control through GPIO, PD suspend/resume and modes setting for Retimer firmware update under NDA scenario. BUG=b:186521258 TEST=Booted to kernel and validated host router's DFPx properties after decomposing SSDT table. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I81bef80729f6df57119f5523358620cb015e5406 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52712 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/intel/shadowmountain: Remove power_gpio from baseboardJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot defines power control for each DFP respectively under host router. This change removes the power_gpio from the baseboard. Individual DFPx power_gpio will be added once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I819d2900afabbfdb2713fa8eee35d3c90cb904fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/54290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/google/volteer: Remove power_gpio from baseboardJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot defines power control for each DFP respectively under host router. This change removes the power_gpio from baseboard. Individual DFPx power_gpio will be added once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Iec2437ab20d283d080752a80aa4514aa9af6897e Reviewed-on: https://review.coreboot.org/c/coreboot/+/52711 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18ec/google/chromeec: Remove ec_retimer_fw_updateJohn Zhao
Along with upstream kernel for Retimer firmware update, coreboot changes the ec_retimer_fw_update format. This change removes this API and will add implementation later once the dependent definition is complete. BUG=b:186521258 TEST=Build image successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I2d074b84fb3cb87b443871104b72b6c316af5279 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18util/mb/google: add support for bryaPaul Fagerburg
Add the file templates for creating a new variant of Brya. BUG=b:177017247 Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: If141d9b43ea5b845c1855f12e03e7d0cf535d2ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/54489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18soc/intel/alderlake: Add handling of GPIO_COM3 in gpio.aslMaulik V Vaghela
We were not adding power management handling of GPIO_COM3 in gpio.asl This can affect s0ix flow where platform won't go into s0ix since GPIO_COM3 is not power gated. BUG=b:188392183 BRANCH=None TEST=Platform should enter to s0ix and GPIO COMM3 should not block an entry to s0ix. Change-Id: I3f269c66bdd6337adb0d2bd29d0b7d72ced19ec4 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54391 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-05-18mb/google/brya: Disable dynamic GPIO PM for community 3Maulik V Vaghela
We recently added GPIO definition for PCIE vGPIO for Alder Lake. We also need to disable GPIO dynamic PM for this community which is already done for other communities as well. BUG=b:188392183 BRANCH=None TEST=Code compiles and Check if dynamic PM for GPIO COMM3 is also disabled Change-Id: I2f8645b8f4a9995e727a7623af97531c5de52892 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54383 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-18vboot/secdata_mock: Make v0 kernel secdata contextAseda Aboagye
The new kernel secdata v1 stores the last read EC hash, and reboots the device during EC software sync when that hash didn't match the currently active hash on the EC (this is used with TPM_CR50 to support EC-EFS2 and pretty much a no-op for other devices). Generally, of course the whole point of secdata is always that it persists across reboots, but with MOCK_SECDATA we can't do that. Previously we always happened to somewhat get away with presenting freshly-reinitialized data for MOCK_SECDATA on every boot, but with the EC hash feature in secdata v1, that would cause a reboot loop. The simplest solution is to just pretend we're a secdata v0 device when using MOCK_SECDATA. This was encountered on using a firmware built with MOCK_SECDATA but had EC software sync enabled. BUG=b:187843114 BRANCH=None TEST=`USE=mocktpm cros build-ap -b keeby`; Flash keeby device, verify that DUT does not continuously reboot with EC software sync enabled. Signed-off-by: Aseda Aboagye <aaboagye@google.com> Change-Id: Id8e81afcddadf27d9eec274f7f85ff1520315aaa Reviewed-on: https://review.coreboot.org/c/coreboot/+/54304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-05-18mb/asus/h61m-cs: Transform into variant setupAngel Pons
To preserve reproducibility, temporarily guard mainboard.c contents. This will be removed once all boards have become variants. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus H61M-CS remains identical when not adding the .config file in it. Change-Id: I1ffb41470d24713a4a7f0689958b733d4b1bdf52 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/p8h61-m_pro: Transform into variant setupAngel Pons
Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M PRO remains identical when not adding the .config file in it. Change-Id: Iaa53a8a1b75f4c7359e32c6cd8c8a488c5763bbe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/p8h61-m_lx3_r2_0: Transform into variant setupAngel Pons
Get ready to squash all Asus H61 boards together, so as to factor out lots of redundant code. Tested with BUILD_TIMELESS=1, coreboot.rom for the Asus P8H61-M LX3 R2.0 remains identical when not adding the .config file in it. Change-Id: I738197bf4d5ea8b879ae26ecbcb0cf3714316662 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54372 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-05-18mb/asus/{h61m-cs,p8h61-m_lx}: Reorder `_PTS` and `_WAK`Angel Pons
Done to preserve reproducibility when switching to a variant setup. Change-Id: I78241c807f767846774b8e1a2e0d25f3452ed544 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-05-18Asus H61 boards: Align dsdt.asl with other boardsAngel Pons
Prepare to transform Asus H61 boards into a variant setup. Change-Id: Ifd5808edac22ebdba9b29a711ad129b91d9975d0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2021-05-18mb/asus/h61m-cs/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: I91ee7dc601f1fc52a7d68f66555143156b91ebf9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54365 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_lx/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: Ia5a8d36f78db2262b4c8d48cbb4dd16718d01475 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54364 Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_pro/Kconfig: Sort selectsAngel Pons
In preparation to switch the Asus H61 boards to a variant setup, sort the `select` lines in Kconfig alphabetically. Change-Id: I96486d57250e901d872e4ef12967c2aadd9791ea Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54363 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18mb/asus/p8h61-m_pro: Relicense gma-mainboard.adsAngel Pons
Commit 65ddbb720b1 (mb/asus/p8h61-m_pro: Add new mainboard) added this file, and I authored this commit. Since most gma-mainboard.ads files are licensed as GPL-2.0-or-later, relicense this one for consistency. Change-Id: I2d28150f4c97ba600cb46fead7bb29cdc65c5baf Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54362 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18LGA1155 boards: Drop `VGA_BIOS_{FILE,ID}` for iGPUAngel Pons
These boards have a socketed CPU, and the PCI device ID for the iGPU depends on the installed CPU. Specifying a default doesn't make sense. Change-Id: Iee6749e4fb691f09664cc6ffb3cbf66e4230fa9c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54361 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18option: Introduce `CMOS_LAYOUT_FILE` Kconfig symbolAngel Pons
Mainboards with variants may not always use the same cmos.layout file. Turn the hardcoded path into a Kconfig symbol to allow changing it. Tested with BUILD_TIMELESS=1: Without including the config file in the coreboot.rom and with `USE_OPTION_TABLE` selected, building for the Asus P8H61-M PRO produces an identical coreboot image. Change-Id: I4cc622dcb70855c06cb8a816c34406f8421180df Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54366 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18Makefile.inc: Drop unused `cbfs-files-processor-vsa`Angel Pons
VSA (Virtual System Architecture) is specific to AMD Geode CPUs, which are no longer supported in current coreboot. Drop this remnant. Change-Id: I28bf61cb953e3352b59aa91059341e4de8f84f23 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 06:37:39 +0000