| Age | Commit message (Collapse) | Author |
|---|
|
The placement calculation logic in cbfs_add_component() has become quite
a mess, and this patch can only fix that to a limited degree. The
interaction between all the different pathways of how the `offset`
variable can be set and at what point exactly the final placement offset
is decided can get quite convoluted. In particular, one existing problem
is that the offset for a file added with the --align flag is decided
before the convert() function is called, which may change the form (and
thereby the size) of the file again after its location was found --
resulting in a location that ends up being too small, or being unable to
find a location for a file that should fit. This used to be okay under
the assumption that forced alignment should really only be necessary for
use cases like XIP where the file is directly "used" straight from its
location on flash in some way, and those cases can never be compressed
-- however, recent AMD platforms have started using the --align flag to
meet the requirements of their SPI DMA controller and broken this
assumption.
This patch fixes that particular problem and hopefully eliminates a bit
of the convolution by moving the offset decision point in the --align
case after the convert() step. This is safe when the steps in-between
(add_topswap_bootblock() and convert() itself) do not rely on the
location having already been decided by --align before that point. For
the topswap case this is easy, because in practice we always call it
with --base-address (and as far as I can tell that's the only way it was
ever meant to work?) -- so codify that assumption in the function. For
convert() this mostly means that the implementations that do touch the
offset variable (mkstage and FSP) need to ensure they take care of the
alignment themselves. The FSP case is particularly complex so I tried to
rewrite the code in a slightly more straight-forward way and clearly
document the supported cases, which should hopefully make it easier to
see that the offset variable is handled correctly in all of them. For
mkstage the best solution seems to be to only have it touch the offset
variable in the XIP case (where we know compression must be disabled, so
we can rely on it not changing the file size later), and have the extra
space for the stage header directly taken care of by do_cbfs_locate() so
that can happen after convert().
NOTE: This is changing the behavior of `cbfstool add -t fsp` when
neither --base-address nor --xip are passed (e.g. FSP-S). Previously,
cbfstool would implicitly force an alignment of 4K. As far as I can tell
from the comments, this is unnecessary because this binary is loaded
into RAM and CBFS placement does not matter, so I assume this is an
oversight caused by accidentally reusing code that was only meant for
the XIP case.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia49a585988f7a74944a6630b77b3ebd79b3a9897
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Remove global variables `sblink` and `node_nums` and add function
`get_node_nums()` which reads from PCI config once and returns a static
variable.
TEST=Boot Debian 11 on PC Engines apu3
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I20a47f967093ef91355377c164656cabadc30fe6
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add a list of gpios to lock for brya. This currently includes
GPIOs connected to the FPMCU.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: Idea42a58575c280be0770d38f934acdf5508c45d
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change supplies a list of ADL gpios that are connected to non-host
(x86) controllers and should be locked after initial configuration.
Set SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS to enable GPIO locking.
BUG=b:210430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify that
brya0 boots successfully to kernel.
Change-Id: I457bab39f945ab31a89542c6498a73af70cbf9ee
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For added security, there are some gpios that an SoC will want to lock
once initially configured, such as gpios attached to non-host (x86)
controllers, so that they can't be recofigured at a later point in
time by rogue code.
Likewise, a mainboard may have some gpios connected to secure busses
and/or devices that they want to protect from being changed post
initial configuration.
This change adds a generic gpio locking mechanism that allows the SoC
to export a list of GPIOs to be locked down and allows the mainboard
to export a list of GPIOs that it wants locked down once
initialization is complete.
Use the SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS Kconfig option to
enable this feature.
BUG=b:201430600
TEST='emerge-brya coreboot chromeos-bootimage', flash and verify
brya0 boots successfully to kernel.
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Change-Id: I42979fb89567d8bcd9392da4fb8c4113ef427b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
- Enable Acoustic noise mitigation
- Set slow slew rate VCCIA and VCCGT to 16
BUG=b:206704930
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I2be3d30403284b98276c837adefd91aa62c971e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59535
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update configs so that they work with NixOS 21.11. Drop `iasl` package
since it was replaced with `acpica-tools`.
Change-Id: Icb9a382b83b3b3e55126bb0bb508659d11497a05
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
endian.h wasn't included (although it probably came in as an indirect
include) but in some header sets _XOPEN_SOURCE overrides _DEFAULT_SOURCE
whereas the latter is a super set of the former:
We should get the same things as with _XOPEN_SOURCE (such as memccpy for
which it has been defined) but also extra features like htole32.
Change-Id: Iaee7495b2ae64fdc719ae0879ea95fe7df286212
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59891
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
We only have ADL-P 6+8+2 (45W) VR configuration now. Based on the
power map, fill in correct ADL-P 6+8+2 (28W) VR configuration.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ie8dbd95b2d8e49b5898b2a97aff72e0e64868c8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In previous patch (CB:56764), only basic settings were added.
Now complete devapc settings on MT8195.
1. Update permission setting
2. Updtate master domain setting:
- domain 1: PCIE0, PCIE1
- domain 2: SPM, SSPM, CPU_EB
3. Set domain remap
- MMSYS (4-bit to 2-bit)
- TINYSYS (4-bit to 3-bit)
- TINYSYS (3-bit to 4-bit)
- TINYSYS to EMI (3-bit to 4-bit)
- INFRA2 (3-bit to 4-bit)
4. Set SCP domain and ADSP domain
- domain 3: SCP
- domain 4: ADSP
BUG=b:204347737
TEST=sanity test pass
Change-Id: I1846d56d2dc362de64b28e0ed9a0681f186af7ee
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59746
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Alder Lake-N case for adl_cpu_type and get_supported_lpm_mask.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: If2917ac356fd80f84bcaf70ed710d329e77f7a6d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Disable LEGACY_SMP_INIT to enable PARALLEL_MP.
Also remove a large amount of APIC code that is now unnecessary.
TEST=Boot on PC Engines apu3
Boot time reduced from 1.707 seconds to 1.620 seconds average across
5 coldboots.
Inspired by CB:59693
Change-Id: Ib49e7d3f5956ac7831664d50db5f233b70aa54db
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
With CPU_INFO_V2 enabled %gs holds the pointer to the cpu_info struct,
so don't clobber it. Backup and restore %gs where possible.
Fixes a crash in MPinit seen after calling FSP-S.
Change-Id: If9fc999b34530de5d8b6ad27b9af25fc552e9420
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59764
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I6f11039bafa3800d59d61defa8824ae962224c9b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59763
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes all remaining pieces of the old CBFS API, now that
the last straggling use cases of it have been ported to the new one
(meaning cbfs_map()/cbfs_load()/etc... see CB:39304 and CB:38421).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I1cec0ca2d9d311626a087318d1d78163243bfc3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Remove unnecessary escape bachslashes from:
addr="$(echo \"$$$$sym_line\" ...
The 'echo' will print output line with double quote characters, which
then will be included in the values passed to --add-symbol. This can
cause errors.
Change-Id: I6023515191d6c236bf57870159a35d518f25e9d8
Reported-by: Yu-Ping Wu <yupingso@chromium.org>
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
According to the latest schematic, exchange I2C port for TPM/touchscreen.
TPM: I2C3 -> I2C1
Touchscreen: I2C1 -> I2C3
BUG=b:205648040
TEST=FW_NAME=redrix emerge-brya coreboot
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Change-Id: I3a8339c23522019da884944246427512170510b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch refectors cpu_set_p_state_to_max_non_turbo_ratio(). The
function is updated to use cpu_get_max_non_turbo_ratio().
TEST=Build the code for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If73df17faaf7b870ae311460a868d52352683c0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch defines below APIs :
cpu_is_hybrid_supported() : Check whether CPU is hybrid CPU or not.
cpu_get_bus_frequency() : Get CPU's bus frequency in MHz
cpu_get_max_non_turbo_ratio() : Get CPU's max non-turbo ratio
cpu_get_cpu_type() : Get CPU type. The function must be called if
executing CPU is hybrid.
TEST=Verified the APIs on the Brya board
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I680f43952ab4abce6e342206688ad32814970a91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds the setting of PsysPmax to 143 W according to
gimble board design.
BUG=b:206990759
TEST=emerge-brya coreboot chromeos-bootimage & ensure the value is
passed to FSP by enabling FSP log & Boot into the OS
Change-Id: Id6a203f05ecfcc1020a422850d35fa3fa64e01d0
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ryan Lin <ryan.lin@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This enum is useful to have around for more than just the one file, so
move it to a common header file, and while we're there, also add an
option for UNKNOWN.
TEST=boot test on brya0
Change-Id: I9ccf0ed9504dbf6c60e521a45ea4b916d3dcbeda
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59852
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Some acpigen code may use mutexes, and it is a common idiom to pass
a value for the Timeout field of 0xffff, which is interpreted by OSPM
to mean "no timeout". Therefore add a macro for this value.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I16bc9f3f04dd1e3dc0f3eca3e56377e6f48132b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Eject event is high. Set wake event to active high. The polarity of the SCI and the wakeup_event_action for the pen ejection feature were both
backwards, and was causing the system to fail to enter sleep states
because the event was always asserted.
BUG=b:208937710
TEST=only release switch can wake system.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I568e9175c7a66599f7a525c32e4def7a79b55a0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fixes commit 29c7622 ("cpu/x86/mp_init.c: Fix building with no
smihandler") broke SMM init because is_smm_enable() was called before
smm_enable.
Rework the code a little to make it clear what codepaths are used with
CONFIG_HAVE_SMI_HANDLER.
TESTED: now prodrive/hermes boots again.
Change-Id: If4ce0dca2f29754d131dacf2da63e946be9a7b6d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59912
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia2cc4f799804c7d56db572823246c487cd19a726
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59677
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use ed25519 keys because recent changes to RSA keys in OpenSSH are
making a mess.
Also update references to the Gerrit UI to match the current version.
Change-Id: Ib13836feb6968307d2c8b3022cb0c859dac89bb8
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The stryke project/mainboard never ended up being built and was
cancelled early on, therefore remove it from the tree.
Change-Id: I4d91fbd4ba0abe0cf599e8e75f04398ef9ff5222
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Check the Alderlake CPU ID to determine if cse sub-paritition update is
required or not.
BUG=b:202143532
Change-Id: Icae21dad56ed4a1edea1f641b3d5bccc3943f831
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds the following support to coreboot
1. Kconfig to add IOM/NPHY in the COREBOOT/FW_MAIN_A/FW_MAIN_B
partition of BIOS
2. Helper functions to support update.
Pre-requisites to enable IOM/NPHY FW Update:
1. NPHY and IOM blobs have to be added to added COREBOOT, FW_MAIN_A and
FW_MAIN_B through board configuration files.
CONFIG_SOC_INTEL_CSE_IOM_CBFS_FILE: IOM blob Path
SOC_INTEL_CSE_NPHY_CBFS_FILE: NPHY blob path
2. Enable CONFIG_CSE_SUB_PARTITION_UPDATE to enable CSE sub-partition
NPHY/IOM update.
coreboot follows below procedure to update NPHY and IOM:
NPHY Update:
1. coreboot will navigate through the CSE region,
identify the CSE’s NPHY FW version and BIOS NPHY version.
2. Compare both versions, if there is a difference, CSE will trigger an
NPHY FW update. Otherwise, skips the NPHY FW update.
IOM Update:
1. coreboot will navigate through the CSE region, identify CSE's IOM
FW version and BIOS IOM version.
2. Compares both versions, if there is a difference, coreboot will
trigger an IOM FW update.Otherwise, skip IOM FW update.
Before coreboot triggers update of NPHY/IOM, BIOS sends SET BOOT
PARTITION INFO(RO) to CSE and issues GLOBAL RESET commands if CSE
boots from RW. coreboot updates CSE's NPHY and IOM sub-partition only
if CSE boots from CSE RO Boot partition.
Once CSE boots from RO, BIOS sends HMRFPO command to CSE, then
triggers update of NPHY and IOM FW in the CSE Region(RO and RW).
coreboot triggers NPHY/IOM update procedure in all ChromeOS boot
modes(Normal and Recovery).
BUG=b:202143532
BRANCH=None
TEST=Build and verify CSE sub-partitions IOM and NPHY are getting
updated with CBFS IOM and NPHY blobs.
Verified TBT, type-C display, NVMe, SD card, WWAN, Wifi working after
the update.
Change-Id: I7c0cda51314c4f722f5432486a43e19b46f4b240
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a check to determine if the CSE's current operation mode
is ME_HFS1_COM_SECOVER_MEI_MSG or not before sending HMRFPO_ENABLE
command to CSE. If CSE is already in the ME_HFS1_COM_SECOVER_MEI_MSG,
coreboot skips sending HMRFPO_ENABLE command to CSE to unlock the CSE RW
partition.
TEST=Verify sending HMRFPO_ENABLE command on Brya system.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I387ac7c7296ab06b9bb440d5d40c3286bf879d3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The patch renames the compare_cse_version() function to the
cse_compare_sub_part_version(). It makes the function generic so that
it can be used to compare version of any CSE sub-partition like IOM,
NPHY etc.
TEST=Verified build for Brya
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I88a44a3c0ba2ad8a589602a35ea644dab535b287
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59689
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce the `SOC_INTEL_ALDERLAKE_PCH_N` Kconfig option and use it to
specify the correct amount of PCIe I/O.
Document number 645550 indicates that Alder Lake-N has 12 PCH root ports
and no CPU root ports.
Document number 645548 indicates ADL-N has 5 clock sources and 5 clock
request signals.
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I7ebbcdcdb1ccc34b80ec71ac3e591fe4ad6b1904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch moves the CBFS file measurement when CONFIG_TPM_MEASURED_BOOT
is enabled from the lookup step into the code where a file is actually
loaded or mapped from flash. This has the advantage that CBFS routines
which just look up a file to inspect its metadata (e.g. cbfs_get_size())
do not cause the file to be measured twice. It also removes the existing
inefficiency that files are loaded twice when measurement is enabled
(once to measure and then again when they are used). When CBFS
verification is enabled and uses the same hash algorithm as the TPM, we
are even able to only hash the file a single time and use the result for
both purposes.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I70d7066c6768195077f083c7ffdfa30d9182b2b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add WiFi SAR table for felwinter.
BUG=b:206901900
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I0de710f4447302ee545a67cbd79373bdd2077637
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Change HID name from INT3499 to PRP0001 along with size and
address width. Size decreased from 10K to 2K, address width
decreased from 14 to 8.
BUG=b:203014972
Test= Boot board and issue commands:
`cat /sys/bus/i2c/devices/i2c-PRP0001:02/eeprom >
./brya_imx208_eeprom.bin`
`hexdump -C brya_imx208_eeprom.bin > brya_imx208_eeprom_dump.log`
You should see the result in brya_imx208_eeprom_dump.log to be
same as module nvm file by vendor provided or meet the Intel nvm
calibration format.
(e.g. first 4 bytes be 0x01, 0x03, 0x01, 0x00)
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ib2366ba4c8bb70d8cc82e64ca585b118a96260c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
coreboot stores much information in the CBMEM IMD. Until now it was
ignored. This patch makes use of these coreboot tables entries.
It also removes get_cbmem_addr() function as it is no longer needed.
Moreover, the coreboot tables entry CB_TAG_MRC_CACHE does not exist
anymore, as it is not created by the code. It was replaced by
CBMEM_ID_MRCDATA entry, so MRCDATA should now be accessible through
sysinfo structure field.
Change-Id: I5bd02a98ba2631f34014bc0f8e7ebd5a5ddd2321
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The 'at' part of the name refers to starting to read from a specific
offset, so it doesn't make sense for the 'full' version of the function.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I60d595f0cbd161df171eaa4a76c7a00b6377e2b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59820
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The build fails because smm_stub_size() tries to find a symbol that
won't be present.
Change-Id: I73fee3cf26c0e37cca03299c6730f7b4f1ef6685
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The Hermes mainboard is used in different system configurations. The
current VBT for Poseidon systems is unsuitable for Avalanche systems
because display ports are connected differently.
Add a new field in the BMC config EEPROM layout and use it to choose
the correct VBT for every system configuration.
Change-Id: I2647f2ae3f496b9ad75980ba86beb7800fdb0668
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59838
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The original RCOMP resistor and target values only apply to ULT CPUs and
do not make sense for the CFL-S CPUs Hermes uses. Fix the RCOMP settings
and the associated comments.
Tested, still boots.
Change-Id: I015797c58c914c6581d472e6d70d2dd7bad2b14f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58364
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Define a new field in the board config EEPROM layout for port B Vref.
Write port B Vref settings to unused non-volatile NID 0x12 instead of
NID 0x18, the actual port B NID. Because per-port Vref settings don't
persist after codec resets, a custom Realtek driver (ab)uses NID 0x12
to restore port B Vref after resetting the codec.
Change-Id: Iaa11ba9c74f643e94046d4983fbce65dbedd1025
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the pin configs for the front panel jacks.
Change-Id: I3760f0a25e964cf0eba99d180fd6f3e8488af868
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use lowercase for hex numbers, sort includes alphabetically and avoid
relying on indirect inclusion. Include `<intelblocks/gpio.h>` instead
of `<intelblocks/gpio_defs.h>`, as the latter implcitly relies on one
definition from `<soc/gpio.h>`. Also drop useless dsdt.asl and fix up
the indentation of some includes.
Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical.
Change-Id: I3aeb9a644cf33cb4b1987174f40ef0fc7daccfa9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There's no need to use a variant structure here. Only one variant is
used, and revision-specific differences are handled at run-time, and
it's unlikely that another variant will ever exist.
Reorganize the mainboard code to get rid of the variant structure.
Change-Id: I1543f5b76975b0e7183fbb759e9bae5c34151d06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I943d0e2a91778df306f323e2b889cd4e928e0c2b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59837
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
EN_SPKR GPIO is used as a multiplexer select signal between RAM_ID
straps and Developer Mode Beep signals. During boot up it is LOW and
selects RAM_ID straps. When the system enters OS, it is driven HIGH and
selects DEV BEEP signals. Since in some boards, the GPIO chosen is in S5
domain it does not reset until the system enters mechanical off (G3)
state. On scenarios where the power button is pressed when the system is
in S5, incorrect RAM_ID strap is being read because the EN_SPKR is still
selecting DEV BEEP signal. This causes boot up failures. Fix this by
configuring the EN_SPKR GPIO (in S5 domain) explicitly in PSP verstage.
BUG=b:204450368
TEST=Build and boot to OS in Guybrush. Perform suspend-resume cycle
followed by a S5 -> S0 boot cycle for 2 iterations successfully.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I9a52a167da9c7040731da5d355ec345fd9b13762
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59813
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the LAN device in devicetree and add Kconfig item
RT8168_GET_MAC_FROM_VPD to support programming MAC address.
BUG=b:193750191
BRANCH=None
TEST=Use 'vpd -s ethernet_mac0=...' to write MAC to VPD.
Use 'ifconfig' to check if the MAC written successfully.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Ibb95b02fd6d61621ef46db4d63b48456a0a72732
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The Realtek RT8168 and RT8125 have a similar programming interface,
therefore add the PCI device ID for the RT8125 into driver for support.
BUG=b:193750191
TEST=emerge-brask coreboot chromeos-bootimage. Test on brask whose NIC
is RT8125. Check if the default MAC is written into the NIC.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: Iaa4c41f94fd6e5fd6393abbb30bfc22a149f5d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
FSP v2422_01 introduced new FSPM UPD CnviDdrRfim. Add CnviDdrRfim
config to control the CnviDdrRfim UPD from devicetree. Setting
CnviDdrRfim to 1 enable CNVi DDR RFIM
BUG=b:201724512
BRANCH=None
TEST=Build and boot brya with debug FSP and verify CnviDdrRfim UPD value.
Change-Id: Ia06c9ed77d78821fd4724046bae2f31c9d771518
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207625007
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Change-Id: I20cdd1650d1ca774065a6c051006dfd0b7a3fd79
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The VR configuration should be based on the different Soc SKU type. And
we also have different SKU in the same SA PCI ID.
Therefore, add TDP to recognize the correct SKU and give the correct
power setting.
BUG=b:202486131
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: I4d31e7afc76d9a8c772781671f92ec08f9d8713f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the beadrix variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:204882915
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BEADRIX
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Guybrush uses secure counters to protect against High Definition (HD)
protected content rollback. These secure counters are hosted in TPM
NVRAM. Enable secure counters so that they are defined in PSP verstage.
BUG=b:205261728
TEST=Build and boot to OS in Guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM.
Change-Id: I6818c6f7905aa2eb815059e23c4f79437593f8ca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
High Definition (HD) protected content playback requires secure counters
that are updated at regular interval while the protected content is
playing. To support similar use-cases, define space for secure counters
in TPM NVRAM and initialize them. These counters are defined once during
the factory initialization stage. Also add
VBOOT_DEFINE_WIDEVINE_COUNTERS config item to enable these secure
counters only on the mainboard where they are required/used.
BUG=b:205261728
TEST=Build and boot to OS in guybrush. Ensure that the secure counters
are defined successfully in TPM NVRAM space.
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
tlcl_define_space: response is 0
On reboot if forced to redefine the space, it is identified as already
defined.
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
tlcl_define_space: response is 14c
define_space():219: define_space: Secure Counter space already exists
Change-Id: I915fbdada60e242d911b748ad5dc28028de9b657
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
In next build phase, primus will exchange i2c port for touchscreen and cr50.
BUG=b:207834727
TEST=build pass
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: Ief1b156b866a9aaa2919f0e209b6439c7019e939
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59737
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Due to the vGPIO is not reset when we power on through S5, we would
met MCA when PCIE send L1 request without following Ack
BUG=b:207070967
TEST=S0->S3->S5->power key->S3->S0, see if boot up normal
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Change-Id: Ice522260f288b165ae66dddc3e1979e806b53f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Create the taniks variant of the brya0 reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:207402720
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TANIKS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I797051f93019ccf72f1007d9c0b98cfb071717b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
1. Set the PL1, PL2 and PL4 according to issue b:193864533 comment#55
and Intel's doc #626774.
2. Set PsysPL2 and PsysPmax according to the conclusion in issue
b:193864533 comment#23 and comment#29.
BUG=b:193864533
BRANCH=none
TEST=Compare the measured power from adapter with the value of 'psys'
from the command 'dump_intel_rapl_consumption'.
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I9261902b8c892d0b866f326b24988039c1d30b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59576
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Copy function variant_update_power_limits from brya to set power limits.
Add function variant_update_psys_power_limits and copy the algorithm
from puff. Add structure system_power_limits and psys_config to define
and configure the psys power limits.
BUG=b:193864533
BRANCH=none
TEST=Build pass
Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com>
Change-Id: I183017068e9c78acb9fa7073c53593d304ba9248
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
DVT schematic will exchange TPM_I2C3 to TPM_I2C1, that may need swap
TPM I2C with touchscreen I2C to avoid TPM I2C fall on muxed ISH I2C,
need change I2C map, sch amd GPIO map. b/196293623
BUG=b:207613972
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I26d059a7ea5a3fdf00de260214c00d3bba9aa7f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59580
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow the latest HW schematic change.
BUG=b:208556921
TEST=build pass
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Ic05843487ea540b8cd9a50d5f73803905fd80d49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since we may have either BIOS ACM or both BIOS and SINIT ACMs in CBFS,
the size of txt_heap_acm_element will be different. We cannot always
hardcode the size of ACM addresses array for two ACMs. If only the BIOS
ACM was included, the BDR parsing failed in TBoot due to invalid size
of HEAP_ACM element. Check if SINIT ACM is present in CBFS and push
properly formatted BDR region onto the TXT heap. Use two separate
txt_heap_acm_element structures with different lengths.
TEST=Boot QubesOS 4.0 with TBoot 1.8.2 on Dell OptiPlex 9010 with and
without SINIT ACM in CBFS and see that TBoot no longer complains on
the wrong size of HEAP_ACM element
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib0c37a66d96e1ca3fb4d3f665e3ad35c6f1c5c1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Initialize the DPR register and check if SCLEAN needs to be run.
Allows to reliably boot the platform if ungraceful shutdown occured or
the memory controller has been locked by TXT.
TEST=Dell OptiPlex 9010 with Intel TXT enabled boots successfully
after 4s power button override or power cable unplug when SENTER was
executed. Successfully boot QubesOS 4.0 with TBoot v1.8.2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4b912f121593fa55c11813262f09be1a1055e950
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Keeping the PM timer enabled will disqualify an ADL system from entering
S0i3, and will also cause an increase in power during suspend states.
The PM timer is not required for brya boards, therefore disabling it.
Fixes: 0e905801 (soc/intel: transition full control over PM Timer from
FSP to coreboot)
BUG=b:206922066
TEST=Boot gimble to OS and verify S0i3 counter incrementing after
exiting S0ix suspend states.
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
Change-Id: I8005dacd732c033980ccc479375ff5b06df8dac1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59790
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Alder Lake code currently supports the PCH-M and PCH-P types, which
have some differences (so far, only the amount of PCIe I/O). Mainboards
can use the `SOC_INTEL_ALDERLAKE_PCH_M` Kconfig option to specify which
PCH type they use: select the option to choose PCH-M, do not select the
option to choose PCH-P. While this works, it can be confusing once more
PCH types are added.
Introduce the `SOC_INTEL_ALDERLAKE_PCH_P` Kconfig option so that boards
have to explicitly choose a PCH type. Also, use this option to restrict
the PCH-P defaults for PCH-dependent settings to avoid unintended reuse
of the PCH-P defaults when adding a new PCH type. To make sure only one
PCH type is selected, add some preprocessor in `bootblock.h` to provoke
a build-time error if this requirement is not met. Kconfig doesn't seem
to have a mechanism to describe sets of mutually-exclusive bool options
that allows said options to be selected (a `choice` block doesn't allow
its elements to be selected). Finally, adapt the ADL boards accordingly.
Change-Id: I7deca820e08ce2b5a220f3c97a511a4f3464a976
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Utilize retry() macro in wait_aux_op_finish() and anx7625_init() to
simplify the code.
BUG=none
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: I207e7075e8ac905efd5f201dd54658dedf531568
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
The current implementations of edid_read() and segments_edid_read() have
a few problems:
1. The type of variable `c` is incorrect, not matching the return type
of sp_tx_aux_rd(). In addition, the meaning of `c` is unknown.
2. It is pointless to do `cnt++` when sp_tx_aux_rd() fails.
3. These two functions ignore the return value of
anx7625_reg_block_read().
4. In segments_edid_read(), anx7625_reg_write() might return a positive
value on failure.
Fix all of the 4 issues, and modify the code to be closer to kernel
5.10's implementation (drivers/gpu/drm/bridge/analogix/anx7625.c). Note
that, however, unlike in kernel, anx7625_reg_block_read() here doesn't
return the number of bytes. On success, 0 is returned instead.
In addition, following coreboot's convention, always return negative
error codes. In particular, change the return value to -1 for
edid_read() and segments_edid_read() on failure.
BUG=b:207055969
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: Ife9d7d97df2926b4581ba519a152c9efed8cd969
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59540
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This area is used for storing AP RO verification information.
BRANCH=none
BUG=b:141191727
TEST=built a guybrush firmware image and verified that the RO_GSCVD
area was indeed added:
$ dump_fmap /build/guybrush/firmware/image-guybrush.bin | \
grep -B3 RO_GSCVD
area: 25
area_offset: 0x00808000
area_size: 0x00002000 (8192)
area_name: RO_GSCVD
$
- verified that guybrush device boots fine with the new image.
Change-Id: Ifa24d5a6271a8bcbf737d4580ec85b9cfdd9af01
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57864
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this.
Patch for 5.10 kernel can be found at:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3289984
BUG=b:206850071
TEST=dump SSDT, see _HID instead of _ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If988ca94b6c70d08a7b07cc9f6bbb077fac84e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59731
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards may want to use a _HID instead of an _ADR to locate a
graphics device. This patch provides that option in the devicetree.
BUG=b:206850071
TEST=Add `hid` entry in devicetree, dump SSDT and see _HID instead of
_ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I32be4abf5c60be1f94aabaa2e9c734215c4e291e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Tested on Qemu/i440fx. The follow-up commit adds a config file to
buildtest it.
Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CPLD can be used for board revision determinition.
Remove info about selecting memory type and add Rev 1.4 info
BUG = N/A
TEST = NA
Change-Id: I4bc851f72ae03e98ab1b2e0e04b07ccf6135ebeb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Make BSD part of the coreboot commonlib accessible to libpayload.
Change-Id: I09f475d399ab785f3d3ffdb4b42950d2b397845e
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Fix the issue that power consumption of single rank DRAM is greater
than dual rank DRAM due to incorrect settings of rank1 CKE.
Set rank1 CKE to the correct state to fix this issue.
BUG=b:196867407
TEST=DUT can boot to OS.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: If336197aea4770dda1332b6e83da8ec9a4f9d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch drops unnecessary `pmc_ipc.c` from Makefile as this
file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection.
Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some herobrine variants have USB hub powered by discrete LDO that is
controlled by USB_HUB_LDO_EN gpio. Assert the GPIO on boot.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ia94e046f9eb0d3ce593f3445e0203a7391c14de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Initialize by calling `setup_usb_host0()` from SOC code
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ic378352a97e4f3ed89089f1f7545f8ebb172b1f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
These values make more sense as an enum, and are currently unused in
ASL files, therefore they can be moved to the appropriate part of the
header file and converted there.
Change-Id: I8b8586b46823b5da3614a0b2a2f2f16802e96962
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Despite Stoneyridge being one only SoC in soc/amd that uses the first
generation of the PSP mailblox interface, this code is common for all
SoCs that use the first PSP mailbox interface generation, so move it to
the common PSP generation 1 code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78126cb710a6ee674b58b35c8294685a5965ecd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59701
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BlueTooth disappeared after disabled USB2 port 9,
so we need to re-enable it.
BUG=none
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7971509d7428562c80e781339ead059a189cea13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:207307897
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Change-Id: Ib1682cdafe1b6ed7cc0cf23624f83d2e5bbfb92e
Signed-off-by: Wizard Shen <shenhu5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Libpayload requires cbmem_id.h file to support extracting values from
CBMEM IMD entries of coreboot tables. Libpayload use BSD-3-Clause
license, and all of its files used to compile a static library have to
use it too.
Change-Id: I97c080e34ebdbcdf14fe3a3c9515b1dea8ede179
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
New PI 1.0.0.5 has more data in HOB of DMI, which has been uploaded to
google internal repo. The dismatched size of HOB causes the wrong data
tranfer. So the coreboot also need to change.
BUG=b:204732649
Change-Id: Id95c37a0d7027d75afddf9d7528ff41ae3a347f5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This part was copied from Picasso but Cezanne has some more bits used so
add the definitions now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Both SPI_ROM_BIOS_SEMAPHORE and SPI_ROM_EC_SEMAPHORE bits in the
LPC_PCI_CONTROL are defined in the Stoneyridge BKDG #55072 Rev 3.04,
Raven1 and Picasso PPR #55570 Rev 3.18, Raven2 PPR #55772 Rev 3.08 and
Cezanne PPR #56569 Rev 3.03 which are all platforms that use this code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I855e640d020daf21c9f5b2f62a2ad0fd0274a575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This one might conflict with '#include <smp/atomic.h>'.
Change-Id: I7413406ca69e78e5a6e539a01e05033243107272
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch replaces the use of the deprecated
cbfs_locate_file_in_region() API with the new
cbfs_unverified_area_map().
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If4855280d6d06cf1aa646fded916fd830b287b30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a new ..._unverified_area_... group of functions to the
cbfs_map/_load/_alloc() APIs. These functions can be used to access
custom FMAP sections and are meant to replace the existing
cbfs_locate_file_in_region(). The name is intended to highlight that
accesses through this API will not be verified when CBFS_VERIFICATION is
enabled and should always be treated as if they may return malicious
data. (Due to laziness I'm not adding the combination of this API with
the ..._type_... variant at this point, since it seems very unlikely
that we'll ever have a use case for that. If we ever do, it should be
easy to add later.)
(Also remove the 'inline' from cbfs_file_hash_mismatch(). I'm not sure
why I put it there in the first place, probably a bad copy&paste.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I402265900f7075aa0c2f58d812c67ea63ddf2900
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Adding USB addressmap for sc7280.
Use common USB driver for sc7280.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add common USB driver for qualcomm soc sc7180 and sc7280.
This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7180 and
sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: I1013ded22855286220cfa747cb25418070fe85a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When using 32 bit PCI accesses in lpc_enable_port80, we can use the
LPC_IO_OR_MEM_DECODE_ENABLE and DECODE_IO_PORT_ENABLE4 defines and don't
need to re-define bits with offsets from the beginning of the third byte
within this 32 bit register. This allows to drop the
LPC_IO_OR_MEM_DEC_EN_HIGH register definition which points to
LPC_IO_OR_MEM_DECODE_ENABLE + 2 and to drop the re-definitions of the
bit re-definitions with a different offset.
The code in lpc_enable_port80 was originally copied from sb/amd/agesa/
hudson/early_setup.c which might be sort-of a copy from what the AGESA
reference code does.
TEST=When commenting out SOC_AMD_COMMON_BLOCK_USE_ESPI in the Kconfig of
Mandolin and selecting AMD_LPC_DEBUG_CARD, all POST codes still get
shown on the POST code LED display when this patch is applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I001bb1c2ccf99e36d4fbd73d3bf96b78ddb87d67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This function is unused and none of the SoCs using this code has a
physical PCI interface any more, so drop this function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c5a8ec29264a075fefe75038ef2a84684d6427
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will enable preloading the microcode. By preloading the
file, into cbfs_cache we reduce boot time.
BUG=b:179699789
TEST=Boot guybrush with CL chain and see microcode preloading and a
reduction of 1 ms.
| 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) |
| 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If0c634c692c97769e71acd1175fc464dc592c356
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This will allow us to preload the dsdt.aml file.
BUG=b:179699789
TEST=Build guybrush
| 80 - write tables | 1.564 | 1.08 Δ( -0.48, -0.03%) |
| 85 - finalize chips | 15.483 | 13.543 Δ( -1.94, -0.14%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibf69ecb947811a2eec861018e3ba5f858155f1c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of
PCI_BASE_ADDRESS_4 in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit
definitions are also wrong, so drop those defines. For the PSP mailbox
interface version 2, struct pspv2_mbox is used to access the correct
status bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit 796aeeba96fc (util/cse_fpt: Add a new tool for managing Intel CSE
FPT binaries) and commit d7fb6a90e1d0 (util/cse_serger: Add a new tool
for stitching CSE components) add two utilities, and building cbfstool
also generates executables for them. When building cbfstool standalone,
these executables are placed in `util/cbfstool/`, and Git should never
track them.
Specify these executables' file names in .gitignore in order to prevent
unintentional inclusion of these files in commits, which is very likely
to happen when using `git add` on directories.
Change-Id: I285a4d7aeee642822eaae2eb69e5d52efb4bc8c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59670
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are no quad-core CPU models with fam14, \_SB.C002 and .C003 get
removed from ASL.
Change-Id: I96df5b3f93c2dd6a05d5693069b991ca01f71d73
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
