summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-01-03mb/clevo/l140cu: add panel settings to the dt and hook up GMA ACPIMichael Niewöhner
Add the panel settings dumped from vendor firmware and hook up drivers/intel/gma, which will be required for brightness control. Keyboard brightness control still requires ACPI code. This will be done in a separate change later. Test: Panel gets enabled when the payload starts on Clevo L141CU. Change-Id: I7977a2271da72c142b025b4631318d1a39adfb13 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-03drivers/intel/gma: add macro for one internal panel in gfx structMichael Niewöhner
Add a new macro `GMA_DEFAULT_PANEL(ssc)` as shortcut for specifying one internal panel at port A (0) in the devicetree. Change-Id: I5308b53667657d0b255ae5bc543f1a00431f5818 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49054 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-03soc/intel: Drop indirect <soc/nvs.h> includeKyösti Mälkki
Change-Id: Ia19018685749efdd543cb09c06df117690ab9d66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48803 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03soc/intel: Replace <soc/nvs.h> with <soc/device_nvs.h>Kyösti Mälkki
Change-Id: Ib78e746875e330e47540a6199343be62aa7e92a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48830 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03sb,soc/intel: Convert some CONFIG(CHROMEOS) preprocessorKyösti Mälkki
Change-Id: I964f4340caa20124a15e52c055d2f27ba5113687 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48783 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-03vc/google/chromeos: Move chromeos_set_me_hash() prototypeKyösti Mälkki
Change allows to remove some <chromeos/gnvs.h> exposure from coreboot proper. Change-Id: I7817914cc7b248331bb8fa79baa642ed548bbc11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48782 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-02soc/amd/picasso: Separate CPUID defs into new headerJason Glenesk
Move CPUID definitions out of msr.h into new cpuid.h header. BUG=b:155307433 BRANCH=Zork Change-Id: I2ed5e0a5a6dbdb38fce8bf3e769f680330718653 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-02acpi: Add cb support to publish CRAT ACPI objectJason Glenesk
Add cb support to publish CRAT ACPI object in native coreboot. BUG=b:155307433 BRANCH=Zork Change-Id: I5fb7c15b11414f6d807645921c0ff1ab927e6e0f Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-01-01libpayload/lpgcc: Check for `libpayload.config` for in-tree buildsNico Huber
Instead of checking for an already fully build `libpayload.a`, we check for the `libpayload.config` which is the actual prerequisite to start using `lpgcc`. This will allow compilation of payload sources before or in parallel with the build of `libpayload.a`. Change-Id: Ic0143fefe33560af8b013ae48bbbe231b3ad46f3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-01libpayload/lpgcc: Turn references to build dir into a variableNico Huber
Introduce a `$_OBJ` variable, that points to the build directory for in-tree usage of `lpgcc`. If unset, the default `../build` relative to the location of `lpgcc` is used. Change-Id: I35112d7533d69aa51252dd2bceec010a62522403 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47629 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-01libpayload: Keep a copy of .config in the build dirNico Huber
This should make it easier to find the correct config for in-tree builds. Change-Id: I08d396ae3cedc65f63c4b8865701ea123c7d56cb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47628 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-01libpayload: Move .xcompile into $(obj)Nico Huber
Keep libpayload's xcompile in its build dir. While we are at it, align things with the top-level version. Having `.xcompile` in a central place led to race conditions when multiple payloads try to build their own libpayloads in parallel. Change-Id: I504e1862db79b368289867f7568c9169f27a1549 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-01soc/intel/cnl: add panel and backlight configuration codeMichael Niewöhner
Add code for panel and backlight configuration. Tested successfully with libgfxinit on Clevo L141CU. Change-Id: If619b28478b4b0d18f28f318c16336e0de76e129 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-01-01soc/intel/bdw,nb/intel/hsw: convert panel delays to ms representationMichael Niewöhner
For easier review of the switch to a new register struct in the follow-up change, the panel delay times get converted from destination register raw format to milliseconds representation in this change. Formula for conversion of power cycle delay: gpu_panel_power_cycle_delay_ms = (gpu_panel_power_cycle_delay - 1) * 100 Formula for all others: gpu_panel_power_X_delay_ms = gpu_panel_power_X_delay / 10 The register names gain a suffix `_ms` and calculation of the destination register raw values gets done in gma code now. Change-Id: Idf8e076dac2b3048a63a0109263a6e7899f07230 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-01-01soc/mediatek: dsi: Fix EoTp flagShaoming Chen
SoC will transmit the EoTp (End of Transmission packet) when MIPI_DSI_MODE_EOT_PACKET flag is set. Enabling EoTp will make the line time larger, so the hfp and hbp should be reduced to keep line time. BUG=b:168728787 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Shaoming Chen <shaoming.chen@mediatek.corp-partner.google.com> Change-Id: Ifadd0def13cc264e9d39ab9c981fbdc996396bfa Reviewed-on: https://review.coreboot.org/c/coreboot/+/48868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-01-01mb/google/kukui: Add panel api after dsi startJitao Shi
Some bridge chip or panel requires dsi signal output before dsi receiver works. BUG=b:168728787 BRANCH=kukui TEST=Display is normal on Kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I3bded27087490f32ee233e615cfad1fd05fb582d Reviewed-on: https://review.coreboot.org/c/coreboot/+/47380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31util/amdfwtool: portability fixes for FreeBSDIdwer Vollering
Add the stdint.h header, and drop the GLIBC section from amdfwtool.h to build this tool on FreeBSD as well as Linux. Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: I295fd308b0f5e2902931f02c9455823a614976de Reviewed-on: https://review.coreboot.org/c/coreboot/+/48977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-31coreboot_table: Convert some CONFIG(CHROMEOS) preprocessorKyösti Mälkki
Change-Id: I1e63a419db92642df6b7956050c39540c2ae11d6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48781 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-31soc/intel/skylake: Remove device_nvs.hKyösti Mälkki
Change-Id: I9d500be609d61ccf234260216bd5aae3f78e91a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48802 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-31soc/mediatek/mt8192: Move flash_controller.c to common/Yidi Lin
The flash controller driver can be shared among mt8173 and mt819x. TEST=boot to kernel on Asurada boot to kernel on Hana (w/o BL31) Change-Id: I4e5213563189336496122a0f2d8077b3e5245314 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-31soc/mediatek/mt8192: Add DDR mode register initHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: If200f4dcef0b1d0b7e901d4ae6e667b1f75156f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Do dramc duty calibrationHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I317451e41774e983c07566dc71c7ba8833c7f55e Reviewed-on: https://review.coreboot.org/c/coreboot/+/44710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Add dramc 8 phase calibrationHuayang Duan
To get better PI linearity, perform 8 phase calibration to do MCK 0/180/45 training and select the best PI settings. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: Ib4ccaa8d43b8382cbc64cf82de86ad1ac16cb89a Reviewed-on: https://review.coreboot.org/c/coreboot/+/44709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-31soc/mediatek/mt8192: Update initial settings of dramcHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I08326cd1e6f7415d3a91d1591678e1b2c52c6781 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-30drivers/intel/gma: Include gfx.asl by default for all platforms...Matt DeVillier
which select INTEL_GMA_ACPI. Rework brightness level includes and platform-level asl files to avoid duplicate device definition for GFX0. Include gfx.asl for Skylake/Kabylake, since all other soc/intel/common platforms already do. Adjust mb/51nb/x210 to prevent device redefinition. Some OSes (e.g. Windows, MacOS) require/prefer the ACPI device for the IGD to exist, even if ACPI brightness controls are not utilized. This change adds a GFX0 ACPI device for all boards whose platforms select INTEL_GMA_ACPI without requiring non-functional brightness controls to be added at the board level. Change-Id: Ie71bd5fc7acd926b7ce7da17fbc108670fd453e0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/intel/common: Move gfx.asl to drivers/intel/gmaMatt DeVillier
Adjust platform-level includes as needed. Change-Id: I376349ccddb95c166f0836ec1273bb8252c7c155 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-30soc/mediatek/mt8192: eint: unmask eint event mask registerG.Pangao
eint event mask register is used to mask eint wakeup source on mt8192. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel eint upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. BUG=b:169024614 Signed-off-by: G.Pangao <gtk_pangao@mediatek.com> Change-Id: I8ee80bf8302c146e09b74e9f6c6c49f501d7c1c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/46409 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-30payloads/tianocore: Clean up build stringMatt DeVillier
Extract the architecture (-a) and package (-p) options into a new variable (ARCH) to simplify the construction of BUILD_STR. Test: build/boot various boards w/Tianocore payload Change-Id: I490d48428ac56d613d0b704700dfcf4ebfb2d245 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48942 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-30soc/intel/cnl: add Kconfig values for GMA backlight registersMichael Niewöhner
Add the right register values for backlight control to CNL's Kconfig. To make iasl happy about the reversed register order, split the field. Change-Id: I05a06cc42397c202df9c9a1ebc72fb10da3b10ec Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-30mb/ocp/deltalake: replace "POST complete" mb code with driver functionalityMichael Niewöhner
Replace the mainboard-specific code for "POST complete" signalling with devicetree entries for using the newly introduced IPMI driver functionality. Test: Boot the machine via the BMC web interface and check that sensors get read correctly by the IPMI firmware when the payload starts. Tested successfully. Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Change-Id: I3441c2a971cfb564b34b3a419beceb949fe295b1 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30mb/supermicro/x11ssh-tf: configure "POST complete" gpio for IPMI driverMichael Niewöhner
Configure the "POST complete" gpio in the devicetree for the BMC/IPMI driver and set the pad's initial value to 0 since the signal is active- high and shall be set by the IPMI/BMC driver. Also add the pad to early gpio config, since it is expected to have an external pull-up like X11SSM-F, which is wrong and would confuse the BMC. Test: Boot the machine via the BMC web interface and check that sensors get read correctly by the IPMI firmware when the payload starts. Tested successfully. Change-Id: If344b2271bfc8d50b8b64847109818f96f2abbcb Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30mb/supermicro/x11ssm-f: configure "POST complete" gpio for IPMI driverMichael Niewöhner
Configure the "POST complete" gpio in the devicetree for the BMC/IPMI driver. Also add the pad to early gpio config, since it has an external pull-up, which is wrong and would confuse the BMC. Set the pad's initial value to zero since the "POST complete" signal is active-high and shall be set by the IPMI/BMC driver. Test: Boot the machine via the BMC web interface and check that sensors get read correctly by the IPMI firmware when the payload starts. Tested successfully. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I6409b2aca90585e44ee5d32df0ae73b259443f32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30mb/supermicro/x11ssm-f: configure the BMC jumper JPB1Michael Niewöhner
Set `bmc_jumper_gpio` to the JPB1 gpio to enable/disable BMC/IPMI according to its value. Test: Boot with jumper set to each enabled and disabled and check debug log if IPMI gets enabled/disabled accordingly. Tested successfully. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I8581556d915cbad2c743a79db273479ba55798fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/48095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30drivers/ipmi: implement "POST complete" notification functionalityMichael Niewöhner
Some server boards like OCP Tiogapass and X11-LGA1151 boards use a gpio for signalling "POST complete" to BMC/IPMI. Add a new driver devicetree option to set the gpio and configure a callback that pulls the gpio low right before jumping to the payload. Test: Check that sensor readings appear in BMC web interface when the payload gets executed. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: I34764858be9c7f7f1110ce885fa056591164f148 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30drivers/ipmi: add code to set BMC/IPMI enablement from jumperMichael Niewöhner
Some boards, like the Supermicro X11SSM-F, have a jumper for enabling or disabling the BMC and IPMI. Add a new devicetree driver option to set the GPIO used for the jumper and enable or disable IPMI according to its value. This gets used in a follow-up change by Supermicro X11SSM-F. Test: Boot with jumper set to each enabled and disabled and check debug log if IPMI gets enabled/disabled accordingly. Successfully tested on Supermicro X11SSM-F with CB:48095. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icde3232843a7138797a4b106560f170972edeb9c Reviewed-on: https://review.coreboot.org/c/coreboot/+/48094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-30soc/intel: hook up new gpio device in the soc chipsMichael Niewöhner
This change adds the required gpio operations struct to soc/common gpio code and hooks them up in all socs currently using the gpio block code, except DNV-NS, which is handled in a separate change. Also, add the gpio device to existing chipset devicetrees. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: I81dbbf5397b28ffa7537465c53332779245b39f6 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48583 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29Revert "mb/google/brya: Initiate peripheral buses"Felix Singer
This reverts commit 5bb5c43b936f0bb01e08a71df1865343d7be9b88. Reason for revert: Build bot fails. Change-Id: I8f022514351b37be135d10ef8486e4aa5fd6361b Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48980 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/bdw,nb/intel/hsw: correct mask for panel power cycle delayMichael Niewöhner
Correct the mask for the power cycle delay from 0xff to 0x1f, to represent the actual maximum value according to Intel graphics PRM for Haswell, Volume 2c and Intel graphics PRM for Broadwell, Volume 2c. Change-Id: Ib187f1ca6474325475e5ae4cc1b2ffbce12f10bf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48957 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/alderlake: Update chipset.cb for TCSS and USBEric Lai
Follow TGL chipset.cb to add alias for TCSS and USB ports. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I803dad0af09b26a55ffb767826ba79cf61de04ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/48793 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29soc/intel/skylake: Add 4 missing root ports to chipset dtFelix Singer
The Kaby Lake PCH can have up to 24 PCIe root ports. Thus, add 4 missing root ports to the chipset devicetree. Change-Id: I443fb736873d47f1b6fe7718a10e1bb4ae5df2a6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48947 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-29mb/google/poppy/natutilus: Add missing PR dependencyRicardo Ribalda
On commit 64c03e3c ("mb/google/poppy: Fix race condition in acpi"), we introduced a new Power Resource common to all the camera modules, in order to resolve a race condition when both modules were in use (e.g. during startup). The nautilus variant also used the Power Supply I2C2.PMIC.OVTH, which requires the new common PR, but the new dependency was not added. Depend on the new Camera Common Power Resource. Fixes: 64c03e3c ("mb/google/poppy: Fix race condition in acpi") BRANCH=poppy BUG=b:174941580 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Change-Id: Ifa6c70b7c02aec0112189eca573e76e53175d70d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: shkim <sh_.kim@samsung.com>
2020-12-29mb/google/brya: Initiate peripheral busesEric Lai
Initiate peripheral buses based on latest schematic. BUG=b:174266035 TEST=Build Test Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I3a828bfb3ba4ee9a9b41cd4e83701672e5ef85bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/48295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-29sec/intel/txt/Kconfig: Make TXT HEAP and SINIT size configurableArthur Heymans
More recent platforms (Cooperlake) need bigger sizes. Change-Id: Ia3e81d051a03b54233eef6ccdc4740c1a709be40 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-29util/xcompile: fix XGCCPATH handlingrnhmjoj
This patch fixes the build with an external (coreboot) toolchain. When the toolchain is not under util/crossgcc/xgcc, setting XGCCPATH to /path/to/toolchain results in the error: toolchain.inc:169: The coreboot toolchain version of iasl '<date>' was not found The reason is that the xcompile script incorrectly assumes XGCCPATH to have a trailing slash. Change-Id: Ifcc4bd2b081fa3603420dc0a8cab3b47967ebc65 Signed-off-by: Michele Guerini Rocco <rnhmjoj@inventati.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-29soc/mediatek/mt8192: Implement dramc base settings for each frequencyHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I50d5aebaf249ab7292fad7a0046099239c8b403c Reviewed-on: https://review.coreboot.org/c/coreboot/+/44707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-29mb/clevo/n13xwu: Disable GMM PCI deviceFelix Singer
We don't know exactly for what the GMM PCI device is used for or how it is used. Thus, remove it to fallback to default-disable. Change-Id: I4b8b33b16527cbcc21168b995cbfdb54a2fa3cac Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-29mb/clevo/n130xu: Remove disabled devices from devicetreeFelix Singer
All known on-chip PCI devices are documented in chipset devicetree now and default to disabled. There is no need to keep disabled PCI devices in the mainboard's devicetree. Thus, remove them. Change-Id: I7c537bba75d66badf854f9e7b6799303a7af018e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-28device/pnp: add register PNP_IO4Michael Niewöhner
Add the register PNP_IO4, which will be used by IT5570E in CB:48894. Change-Id: Ic820295247323f546d4c48ed17cfa4eab3dc5e92 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48924 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28device + util/sconfig: introduce new device `gpio`Michael Niewöhner
Introduce a new device `gpio` that is going to be used for generic abstraction of gpio operations in the devicetree. The general idea behind this is that every chip can have gpios that shall be accessible in a very generic way by any driver through the devicetree. The chip that implements the chip-specific gpio operations has to assign them to the generic device operations struct, which then gets assigned to the gpio device during device probing. See CB:48583 for how this gets done for the SoCs using intelblocks/gpio. The gpio device then can be added to the devicetree with an alias name like in the following example: chip soc/whateverlake device gpio 0 alias soc_gpio on end ... end Any driver that requires access to this gpio device needs to have a device pointer (or multiple) and an option for specifying the gpio to be used in its chip config like this: struct drivers_ipmi_config { ... DEVTREE_CONST struct device *gpio_dev; u16 post_complete_gpio; ... }; The device `soc_gpio` can then be linked to the chip driver's `gpio_dev` above by using the syntax `use ... as ...`, which was introduced in commit 8e1ea52: chip drivers/ipmi use soc_gpio as gpio_dev register "bmc_jumper_gpio" = "GPP_D22" ... end The IPMI driver can then use the generic gpio operations without any knowlege of the chip's specifics: unsigned int gpio_val; const struct gpio_operations *gpio_ops; gpio_ops = dev_get_gpio_ops(conf->gpio_dev); gpio_val = gpio_ops->get(conf->bmc_jumper_gpio); For a full example have a look at CB:48096 and CB:48095. This change adds the new device type to sconfig and adds generic gpio operations to the `device_operations` struct. Also, a helper for getting the gpio operations from a device after checking them for NULL pointers gets added. Successfully tested on Supermicro X11SSM-F with CB:48097, X11SSH-TF with CB:48711 and OCP DeltaLake with CB:48672. Change-Id: Ic4572ad8b37bd1afd2fb213b2c67fb8aec536786 Tested-by: Johnny Lin <Johnny_Lin@wiwynn.com> Tested-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48582 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-28drivers/intel/gma: drop unused register to resolve name conflictMichael Niewöhner
The register `ESR` conflicts with the `Exception syndrome register` in UDK2017. To resolve the conflict, drop the unused `ESR` register from gma registers. It can be readded and prefixed or renamed if it's required at a later point. Change-Id: Icfdd834aea59ae69639a180221f5e97170fbac15 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-28drivers/libgfxinit: Add Comet Lake to supported platformsFelix Singer
Signed-off-by: Felix Singer <felixsinger@posteo.net> Change-Id: I002ade555c0544e4ef738c1ad45ee3d8aa38e03e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-283rdparty/libgfxinit: Update for Cannon Point supportNico Huber
We missed that Cannon Point, the PCH usually paired with Coffee, Whiskey and Comet Lake, differs a bit from its predecessors. Hence, libgfxinit now has a new Kconfig setting for the PCH. Change-Id: I1c02c0d9abb7340aabe94185ee5e17ef4c2b0d36 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-28mb/kontron/bsl6: Remove disabled devices from devicetreesFelix Singer
All known on-chip PCI devices are documented in chipset devicetree now and default to disabled. There is no need to keep disabled PCI devices in the mainboard's devicetree. Thus, remove them. Change-Id: I0f78dadd9e55a8f002394dc07ab514ca13f4e963 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-28soc/intel/apl: Fix indentsFelix Singer
Change-Id: Ide10889ad01ec6d31ee83158182876625a68a5da Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48888 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28payloads/tianocore: Add Kconfig to set boot timeoutMatt DeVillier
Add a Kconfig option to set the tianocore boot timeout, which is passed to the payload via a command line parameter. Allows boards without an internal display (eg) to set a longer boot timeout, in order to ensure the boot splash/menu prompt are visible upon boot. The associated changes on the tianocore side have already been merged into MrChromebox's CorebootPayloadPkg and UefiPayloadPkg branches (coreboot_fb and uefipayloadpkg respectively). Change-Id: Ifeaadff05f6667d642c05b81f53c1d2dbc450af6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-28soc/intel/xeon_sp: Lock PAM and SMRAM registersArthur Heymans
The CedarIsland FSP Integration recommends locking down some things. Change-Id: I72e04b55d69a8da79485e084b39c3bd38504897f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47168 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28soc/intel/xeon_sp: Lock down IIO DFX Global registersArthur Heymans
This is required for CbNT. Change-Id: I565a95cd2e76cb1c648884be6d1954288f6e4804 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-28soc/intel/xeon_sp: Lock down DMI3 PCI registersArthur Heymans
This is required for CBnT. Change-Id: If5637eb8dd7de406b24b92100b68c5fa11c16854 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-28soc/mediatek/mt8192: add rtc MT6359P driverYuchen Huang
Add rtc MT6359P driver for rtc init and rtc eosc calibration. Refactor mt8173 and mt8183 code by extracting common API. Move rtc_read and rtc_write to each SoC folder, because mt8173 and mt8183 access rtc via pmic wrapper, while mt8192 accesses it via pmif. Reference datasheet: Document No: RH-D-2018-0101. Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: I57d6738fdec148c7458b2024a0a8225415ca2f3e Reviewed-on: https://review.coreboot.org/c/coreboot/+/46395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-28soc/mediatek/mt8192: devapc: add basic devapc driversNina Wu
Add basic devapc (device access permission control) drivers. DAPC driver is used to set up bus fabric security and data protection among hardwares. DAPC driver groups the master hardwares into different domains and gives secure and non-secure property. The slave hardware can configure different access permissions for different domains via DAPC driver. Change-Id: I2ad47c86b88047c76854a6f8a67b251b6a9d4013 Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-28soc/mediatek/mt8192: Do dramc pre-settings before calibrationHuayang Duan
Before calibration, dramc resets the delay of each PHY IO, calculates TX path and sets CKE to be rank independent. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I071eca037f89a916d6cfaf5b008d64f2b4a269a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-28kconfig: remove non-existent sourceJack Rosenthal
src/northbridge/amd/pi/00660F01/Kconfig does not exist. Remove the source statement. Also, no kconfig files under src/soc/intel/common/basecode/. Clean that up. Signed-off-by: Jack Rosenthal <jrosenth@chromium.org> Change-Id: I10917b76ff6c2a9d5a97d5c7dfa9e8925cd8c8a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-12-28soc/intel/skylake: Enable CHAP device depending on devicetreeBenjamin Doron
Now that CHAP device is declared in chipset devicetree, hook it up to devicetree configuration. Change-Id: Icc51f7b9cda32d5058dce958e386921b6d3d8ffb Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48323 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-28sb/amd/pi/hudson: Enable use of common GPIO APIKyösti Mälkki
The code in soc/amd/common has an implementation of GPIO register space that is compatible with the hardware sb/amd/pi/hudson supports. Change-Id: I86ae40a3cdf335263d7e9e3dcfdd588947cdd9b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-27mb/siemens/chili/base: Add SMBIOS slot descriptionsFelix Singer
Add SMBIOS slot descriptions for M.2 ports and remove duplicate comments. Change-Id: Ieff03ad3167aec054cdc6b67ddc20fc64394e347 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-27vpd: Add vpd_get_int() functionNico Huber
Change-Id: I1c1b5710a5236fe4a3bdda1fc978393e636e9817 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45773 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-27src/superio: trim and move Makefile.inc, instead use wildcard matchesIdwer Vollering
Signed-off-by: Idwer Vollering <vidwer@gmail.com> Change-Id: If77d59485451c77dcea752bc4fe0dfadba8fec45 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48900 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-25cpu/intel/model_206ax: Add more CPU steppingsAngel Pons
The Sandy Bridge steppings appear in the BWG, and Ivy Bridge steppings appear in reference code. Add them for the sake of completeness. Change-Id: I7d17cdd04a771ca319c908fc757f868e95ea7944 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-25nb/intel/sandybridge: Move steppings to CPU headerAngel Pons
The steppings correspond to the CPUID bits 3:0, so move them to the CPU scope, and include the CPU header from files using the stepping macros. Change-Id: Idf8fba4911f98953bb909777aea57295774d8400 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48409 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-25nb/intel/sandybridge: Rewrite constant valuesAngel Pons
Rewrite some constants to make their meaning somewhat clearer. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I321f5e61d7c695ae77e61b84728e34930f69d400 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-25nb/intel/sandybridge: Allow to ignore XMP voltageAngel Pons
Native raminit only supports 1.5V operation, but there are DIMMs which request 1.65V operation in XMP profiles. Add an option to force XMP to be used when the requested voltage isn't supported, which will run the DIMMs at 1.5V with XMP timings. Consider this to be overclocking. Change-Id: I64bfac8f72dadf662ceadfc7998daf26edf5a710 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48614 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-25ACPI: Allocate GNVS early in ramstageKyösti Mälkki
We need this to happen prior to SMM module loader. If there is some debugging output it's better they do not appear in the middle of CPU bringup. Change-Id: I45b4b5c0c5bf8bee258a465d1e364bfe98190e44 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-25ACPI: Fix some GNVS field commentsKyösti Mälkki
Change-Id: I0d1e7b86d5b98da85bf539a4a3ec23e0eeaa4dfc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-25sb,soc/intel: Fix GNVS OperationRegionKyösti Mälkki
Structure with chromeos_acpi_t is expected to have size 0x1000. Only ones with device_nvs_t have size 0x2000. Change-Id: I2eaa3a008566853b4144fa34ccffaa232d5d8e24 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-25mb/google/dedede: Update galtic device treeFrankChu
Update galtic device tree override to match schematics. BUG=b:170913840 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I270cd2a9783030ad3a080b9cfda8a133e801c5ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/48656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-25soc/intel/common/gfx: rename and guard graphics_soc_init()Matt DeVillier
Rename to graphics_soc_panel_init, to more accurately convey operations performed by the function. Guard execution so we don't attempt to reconfigure the panel after FSP has already done so. This fixes FSP/GOP display init on APL/GLK, which was broken by attempting to configure the panel after FSP had already done so. Change-Id: I8e68a16b2efb59965077735578b1cc6ffd5a58f0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48884 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-25drivers/ipmi: Add Supermicro OEM commandsPatrick Rudolph
Add a new driver for OEM commands and select it from x11-lga1151-series. The driver communicates the BIOS version and date to the BMC using OEM commands. The command should be supported on all X11 series mainboards, but might work with older BMC, too. Tested on X11SSH-TF: The BIOS version strings are updated on boot and are visible in the BMC web UI. Change-Id: I51c22f83383affb70abb0efbcdc33ea925b5ff9f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-24Documentation: Add Beaglebone Black documentationSam Lewis
Change-Id: If1a9808d1f20ee61048182d416f25e9a81c631af Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-24libpayload/i8042: Add API to peek on keyboard input queueNico Huber
Change-Id: I60699e044b5bacd3f5292fed7edbf529ae133284 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47592 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Add debug output to all state transitionsNico Huber
Change-Id: I643a821d4c41fc068f2bab0bd571b0a4a359f59a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Hide console output by defaultNico Huber
Change-Id: I855d975a4729da34a6fa73a63dbbd12c856bdc00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Implement self-testNico Huber
The keyboard self-test is required for some devices. At least one device (integrated keyboard in a ThinkPad X201) actually starts the test automatically leading to spurious output and no response for the first seconds. We wait up to 5s for the self-test result. On failure or timeout, the command will be repeated until the 30s init timer runs out. This happens all in the background of the UI polling loop. To not unnecessarily delay the boot process, we first try an oppor- tunistic initialization which skips the self-test. Change-Id: Ie07b31e74d06e116ac81e76309621eed39a19b49 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Add timestamp to track time spent in a stateNico Huber
Will be used to time out in states that don't always advance. Change-Id: I28235e7638d8157cedf81fd915a41d28a1fc070b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47087 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Turn init sequence into a state machineNico Huber
We'll process the init sequence as part of the polling loop. This should have several advantages: * It eases error handling, i.e. we can return to an earlier state. * We don't have to stall initialization when a keyboard takes a little longer. * Generally, these keyboards can be hot-plugged (albeit not by design). Change-Id: I9cf5cf31eb420b3994bec20e56a72d37f3d2996e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Avoid races around input drainingNico Huber
Draining the keyboard's buffer is only possible when the keyboard port is enabled. We should also disable input scanning before, as the buffer could be filled again with new keystrokes otherwise. Change-Id: Ibac9c0d04880ff4a3efda5ac53da2f9731f6602c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24libpayload/keyboard: Introduce keyboard_drain_input()Nico Huber
Move the input-buffer draining into a function. It uses the low-level i8042 API directly to avoid conflicts with changes in the high-level keyboard API. Change-Id: I9427c5b8be4d59c2ee3da12d6168d34590043682 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47084 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24libpayload/keyboard: Revise keyboard_cmd() error handlingNico Huber
Even if we are careful, it's still possible that we read spurious data from the keyboard, e.g. keystrokes. Namely, when we send the reset/disable command, there is a race before the command is pro- cessed. So we should always process data from the keyboard in a loop. We break it, when an ACK (0xfa) or a NAK (0xfe) is received, and warn on unexpected data unless it might be due to the mentioned race. This also gives us the opportunity to use command-specific timeouts which we take from Linux: 1s for the keyboard self-test (as there are keyboards that perform the test before acking the command) and 200ms for all other commands. Change-Id: I60a2643a8ff4b9231c63bf970c8749c97c7d8926 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-24mb/prodrive/hermes: Drop EEPROM address function parametersAngel Pons
Only one EEPROM is used to store the board settings, and its I2C address is constant. Thus, there's no need to pass its address as a parameter. In addition, reduce the scope of the `I2C_ADDR_EEPROM` definition, since using it outside of eeprom.c would bypass the API's abstraction layer. Change-Id: I958304e6ed6df05af923139d44ff4fd1de204738 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-24mb/prodrive/hermes: Use already-defined SMBus macrosAngel Pons
Drop chipset register definitions in mainboard code in favor of existing definitions in a header. These definitions are not mainboard-specific. Tested with BUILD_TIMELESS=1, Prodrive Hermes remains identical. Change-Id: I29d6f35ec27bff43cf52ae697e905b6a7b48a8d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-24mb/supermicro/x11-lga1151-series: Select DRIVERS_UART_8250IOPatrick Rudolph
Change-Id: I0251d1193bb36ae73d592a0d17f580b7edaddbf6 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48853 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
This patch add SSD D3 cold support for lindar. BUG=b:172405687 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ie343bbff3bde4ff2a7e89bd384d5661af372b560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-24mb/google/volteer/var/voema: Disable PCIe 7 and 8 for WLAN and SD cardDavid Wu
Based on latest schematic, disable PCIe 7 and 8 for WLAN and SD card. BUG=b:169356808 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I2a4658a382c094c2a5b16b7acaf464f54e9897b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-243rdparty/fsp: Update submodule pointer to newest masterFelix Singer
Newest master introduces the FSP for Tiger Lake client SKUs. Change-Id: Id437faf72f1b8c5bc5310596bdab980e64614fa0 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48712 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24mb/google/volteer/var/voema: Enable RTD3 for the NVMe deviceDavid Wu
Enable Runtime D3 for the volteer variants that have GPIO power control of the NVMe device attached to PCIe Root Port 9. Enable the GPIO for power control for variants that do not already have it configured to allow the power to be disabled in D3 state. BUG=b:169356808 TEST=tested on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I28ef074225c533e1a97b6ec4a1a5dd1dcc198168 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48848 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24soc/intel/xeon_sp/cpx: Disable isoch operation for performanceJohnny Lin
Isochronous operation negatively impacts memory performance, as per Intel MLC (Memory Latency Checker) benchmark results. Thus, disable isochronous operation, like analogous UEFI firmware does. The MLC results after disabling isoch: "--max_bandwidth" ALL Reads : 106948.17 3:1 Reads-Writes : 101580.46 2:1 Reads-Writes : 100523.26 1:1 Reads-Writes : 99059.44 Stream-triad like : 97762.47 "--peak_injection_bandwidth" ALL Reads : 105724.3 3:1 Reads-Writes : 100655.8 2:1 Reads-Writes : 99463 1:1 Reads-Writes : 98708 Stream-triad like : 91515 The MLC results before disabling isoch: "--max_bandwidth" ALL Reads : 88824.96 3:1 Reads-Writes : 94820.81 2:1 Reads-Writes : 94867.53 1:1 Reads-Writes : 92567.36 Stream-triad like : 91900.43 "--peak_injection_bandwidth" ALL Reads : 88859.6 3:1 Reads-Writes : 94064 2:1 Reads-Writes : 94186.2 1:1 Reads-Writes : 92516.1 Stream-triad like : 85147.4 TEST=On OCP Delta Lake, verify that MLC benchmark results have improved. Change-Id: I08c22ee001b601e607452b3f23fad969ecb484b4 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48738 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24mb/google/kukui: Add a new config 'Katsu'Sunway
A new board introduced to Kukui family. BUG=b:176206134 TEST=make # select Katsu BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I09fe2b8f6922dfd2af6424830568466fb98f7aee Reviewed-on: https://review.coreboot.org/c/coreboot/+/48874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-23soc/intel/common: Remove unused SOC_INTEL_COMMON_ACPIMarc Jones
Remove the unused SOC_INTEL_COMMON_ACPI Kconfig option. Change-Id: Id62cd44e0f7e4175ae65c9388569231d5c8c1fbc Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-23src/soc/intel/xeon_sp/acpi.c: Remove unnecessary .hMarc Jones
Remove the unnecessary header file includes. Change-Id: I0d849cb236f304b87332aa64b2f10c73cad2d4dd Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-12-23nb/intel/sandybridge: Refactor ODT stretch table codeAngel Pons
Leverage existing `ch_dimms` value and use constants for brevity. Change-Id: I4e08166c8e9fbd15ff1dcd266abb0689e4b159f7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 06:53:42 +0000