summaryrefslogtreecommitdiff
AgeCommit message (Expand)Author
2021-01-02acpi: Add cb support to publish CRAT ACPI objectJason Glenesk
2021-01-01libpayload/lpgcc: Check for `libpayload.config` for in-tree buildsNico Huber
2021-01-01libpayload/lpgcc: Turn references to build dir into a variableNico Huber
2021-01-01libpayload: Keep a copy of .config in the build dirNico Huber
2021-01-01libpayload: Move .xcompile into $(obj)Nico Huber
2021-01-01soc/intel/cnl: add panel and backlight configuration codeMichael Niewöhner
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
2021-01-01soc/intel/bdw,nb/intel/hsw: convert panel delays to ms representationMichael Niewöhner
2021-01-01soc/mediatek: dsi: Fix EoTp flagShaoming Chen
2021-01-01mb/google/kukui: Add panel api after dsi startJitao Shi
2020-12-31util/amdfwtool: portability fixes for FreeBSDIdwer Vollering
2020-12-31coreboot_table: Convert some CONFIG(CHROMEOS) preprocessorKyösti Mälkki
2020-12-31soc/intel/skylake: Remove device_nvs.hKyösti Mälkki
2020-12-31soc/mediatek/mt8192: Move flash_controller.c to common/Yidi Lin
2020-12-31soc/mediatek/mt8192: Add DDR mode register initHuayang Duan
2020-12-31soc/mediatek/mt8192: Do dramc duty calibrationHuayang Duan
2020-12-31soc/mediatek/mt8192: Add dramc 8 phase calibrationHuayang Duan
2020-12-31soc/mediatek/mt8192: Update initial settings of dramcHuayang Duan
2020-12-30drivers/intel/gma: Include gfx.asl by default for all platforms...Matt DeVillier
2020-12-30soc/intel/common: Move gfx.asl to drivers/intel/gmaMatt DeVillier
2020-12-30soc/mediatek/mt8192: eint: unmask eint event mask registerG.Pangao
2020-12-30payloads/tianocore: Clean up build stringMatt DeVillier
2020-12-30soc/intel/cnl: add Kconfig values for GMA backlight registersMichael Niewöhner
2020-12-30mb/ocp/deltalake: replace "POST complete" mb code with driver functionalityMichael Niewöhner
2020-12-30mb/supermicro/x11ssh-tf: configure "POST complete" gpio for IPMI driverMichael Niewöhner
2020-12-30mb/supermicro/x11ssm-f: configure "POST complete" gpio for IPMI driverMichael Niewöhner
2020-12-30mb/supermicro/x11ssm-f: configure the BMC jumper JPB1Michael Niewöhner
2020-12-30drivers/ipmi: implement "POST complete" notification functionalityMichael Niewöhner
2020-12-30drivers/ipmi: add code to set BMC/IPMI enablement from jumperMichael Niewöhner
2020-12-30soc/intel: hook up new gpio device in the soc chipsMichael Niewöhner
2020-12-29Revert "mb/google/brya: Initiate peripheral buses"Felix Singer
2020-12-29soc/intel/bdw,nb/intel/hsw: correct mask for panel power cycle delayMichael Niewöhner
2020-12-29soc/intel/alderlake: Update chipset.cb for TCSS and USBEric Lai
2020-12-29soc/intel/skylake: Add 4 missing root ports to chipset dtFelix Singer
2020-12-29mb/google/poppy/natutilus: Add missing PR dependencyRicardo Ribalda
2020-12-29mb/google/brya: Initiate peripheral busesEric Lai
2020-12-29sec/intel/txt/Kconfig: Make TXT HEAP and SINIT size configurableArthur Heymans
2020-12-29util/xcompile: fix XGCCPATH handlingrnhmjoj
2020-12-29soc/mediatek/mt8192: Implement dramc base settings for each frequencyHuayang Duan
2020-12-29mb/clevo/n13xwu: Disable GMM PCI deviceFelix Singer
2020-12-29mb/clevo/n130xu: Remove disabled devices from devicetreeFelix Singer
2020-12-28device/pnp: add register PNP_IO4Michael Niewöhner
2020-12-28device + util/sconfig: introduce new device `gpio`Michael Niewöhner
2020-12-28drivers/intel/gma: drop unused register to resolve name conflictMichael Niewöhner
2020-12-28drivers/libgfxinit: Add Comet Lake to supported platformsFelix Singer
2020-12-283rdparty/libgfxinit: Update for Cannon Point supportNico Huber
2020-12-28mb/kontron/bsl6: Remove disabled devices from devicetreesFelix Singer
2020-12-28soc/intel/apl: Fix indentsFelix Singer
2020-12-28payloads/tianocore: Add Kconfig to set boot timeoutMatt DeVillier
2020-12-28soc/intel/xeon_sp: Lock PAM and SMRAM registersArthur Heymans
2020-12-28soc/intel/xeon_sp: Lock down IIO DFX Global registersArthur Heymans
2020-12-28soc/intel/xeon_sp: Lock down DMI3 PCI registersArthur Heymans
2020-12-28soc/mediatek/mt8192: add rtc MT6359P driverYuchen Huang
2020-12-28soc/mediatek/mt8192: devapc: add basic devapc driversNina Wu
2020-12-28soc/mediatek/mt8192: Do dramc pre-settings before calibrationHuayang Duan
2020-12-28kconfig: remove non-existent sourceJack Rosenthal
2020-12-28soc/intel/skylake: Enable CHAP device depending on devicetreeBenjamin Doron
2020-12-28sb/amd/pi/hudson: Enable use of common GPIO APIKyösti Mälkki
2020-12-27mb/siemens/chili/base: Add SMBIOS slot descriptionsFelix Singer
2020-12-27vpd: Add vpd_get_int() functionNico Huber
2020-12-27src/superio: trim and move Makefile.inc, instead use wildcard matchesIdwer Vollering
2020-12-25cpu/intel/model_206ax: Add more CPU steppingsAngel Pons
2020-12-25nb/intel/sandybridge: Move steppings to CPU headerAngel Pons
2020-12-25nb/intel/sandybridge: Rewrite constant valuesAngel Pons
2020-12-25nb/intel/sandybridge: Allow to ignore XMP voltageAngel Pons
2020-12-25ACPI: Allocate GNVS early in ramstageKyösti Mälkki
2020-12-25ACPI: Fix some GNVS field commentsKyösti Mälkki
2020-12-25sb,soc/intel: Fix GNVS OperationRegionKyösti Mälkki
2020-12-25mb/google/dedede: Update galtic device treeFrankChu
2020-12-25soc/intel/common/gfx: rename and guard graphics_soc_init()Matt DeVillier
2020-12-25drivers/ipmi: Add Supermicro OEM commandsPatrick Rudolph
2020-12-24Documentation: Add Beaglebone Black documentationSam Lewis
2020-12-24libpayload/i8042: Add API to peek on keyboard input queueNico Huber
2020-12-24libpayload/keyboard: Add debug output to all state transitionsNico Huber
2020-12-24libpayload/keyboard: Hide console output by defaultNico Huber
2020-12-24libpayload/keyboard: Implement self-testNico Huber
2020-12-24libpayload/keyboard: Add timestamp to track time spent in a stateNico Huber
2020-12-24libpayload/keyboard: Turn init sequence into a state machineNico Huber
2020-12-24libpayload/keyboard: Avoid races around input drainingNico Huber
2020-12-24libpayload/keyboard: Introduce keyboard_drain_input()Nico Huber
2020-12-24libpayload/keyboard: Revise keyboard_cmd() error handlingNico Huber
2020-12-24mb/prodrive/hermes: Drop EEPROM address function parametersAngel Pons
2020-12-24mb/prodrive/hermes: Use already-defined SMBus macrosAngel Pons
2020-12-24mb/supermicro/x11-lga1151-series: Select DRIVERS_UART_8250IOPatrick Rudolph
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
2020-12-24mb/google/volteer/var/voema: Disable PCIe 7 and 8 for WLAN and SD cardDavid Wu
2020-12-243rdparty/fsp: Update submodule pointer to newest masterFelix Singer
2020-12-24mb/google/volteer/var/voema: Enable RTD3 for the NVMe deviceDavid Wu
2020-12-24soc/intel/xeon_sp/cpx: Disable isoch operation for performanceJohnny Lin
2020-12-24mb/google/kukui: Add a new config 'Katsu'Sunway
2020-12-23soc/intel/common: Remove unused SOC_INTEL_COMMON_ACPIMarc Jones
2020-12-23src/soc/intel/xeon_sp/acpi.c: Remove unnecessary .hMarc Jones
2020-12-23nb/intel/sandybridge: Refactor ODT stretch table codeAngel Pons
2020-12-23nb/intel/sandybridge: Refactor `dram_find_spds_ddr3`Angel Pons
2020-12-23nb/intel/sandybridge: Always wait for IOSAV after starting itAngel Pons
2020-12-23nb/intel/sandybridge: Introduce `iosav_run_once_and_wait`Angel Pons
2020-12-23nb/intel/sandybridge: Remove unnecessary commentsAngel Pons
2020-12-23nb/intel/sandybridge: Print delays in decimalAngel Pons
2020-12-23nb/intel/sandybridge: Add comment to TC_RWP writeAngel Pons
2020-12-23nb/intel/sandybridge: Use proper names to refer to training stepsAngel Pons