Age | Commit message (Collapse) | Author |
|
Fix typo in the comment for Common Clock Configuration.
Change-Id: Idd01e787458a9090d53b9a57547b8158480dcc16
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Enable HAS_RECOVERY_MRC_CACHE config and add RECOVERY_MRC_CACHE FMAP
section to cache the MRC training data in recovery mode.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the appropriate MRC_CACHE FMAP
section.
Change-Id: I3f0f41c20b61c96473e887521f84f3ad240adc2b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Use fw_config to probe fingerprint.
BUG=b:269986245
TEST=emerge-skyrim coreboot chromeos-bootimage. Test result is pass
with 1000 reboot cycles.
Change-Id: I4b4bca42dd78dfd5b8636ff3cb05406d2d0c94f7
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP
threshold.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=Verify that the feature is enabled by reading from fsp log
Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To support an RPL SKU on osiris, osiris must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for osiris so that it will use the RPL
FSP headers for osiris.
BUG=b:270640775
BRANCH=firmware-brya-14505.B
TEST=cherry-pick Cq-Depends, then "emerge-brya intel-rplfsp
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage",
flash and boot osiris to kernel.
Cq-Depend: chromium:4290627, chrome-internal:5516851
Change-Id: If8de42a82fd85ffa8b9836e6024f119bc798f4fc
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
It's sufficient to generate CPU devices for all available CPU cores/
threads instead of for the maximum number of possible CPU cores/threads.
TEST=google/careena with 2 cores still boots and Linux doesn't complain
about ACPI errors due to referenced but not present CPU objects.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6850edfa305304060092cb5480f4296f4f5ddacc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
On boards with RECOVERY_MRC_CACHE FMAP section, populate type 0x63 BIOS
directory entry in RO with that section. If the RECOVERY_MRC_CACHE
section is not present, then fall back to RW_MRC_CACHE.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim. Ensure that the Type 0x63 BIOS
directory entry is populated with the base and size of appropriate MRC
cache.
Change-Id: I49ec4f64e33c4d5780a7fe6a5540eab42b6cec9f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73169
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
If a mainboard has RECOVERY_MRC_CACHE and the recovery mode is enabled,
then use APOB data from that section and make any updates to that
section. Otherwise continue to use DEFAULT_MRC_CACHE section.
BUG=b:270569389
TEST=Build and boot to OS in Skyrim.
When in normal mode, DEFAULT_MRC_CACHE is used.
Normal Mode Boot1:
------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x0/0x1e000
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x0
[INFO ] Updated APOB in flash
Normal Mode Boot2:
-----------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
When the device is in recovery mode, RECOVERY_MRC_CACHE is used.
Recovery Mode Boot1:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[INFO ] APOB RAM hash differs from flash
[SPEW ] Copy APOB from RAM 0x02001000/0x1db18 to flash 0x650000/0x1e000
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] SF: Successfully erased 122880 bytes @ 0x650000
[INFO ] Updated APOB in flash
Recovery Mode Boot2:
--------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Recovery Mode to Normal Mode:
-----------------------------------------
[DEBUG] FMAP: area RW_MRC_CACHE found @ 0 (122880 bytes)
[DEBUG] APOB hash matches flash
Switch from Normal Mode to Recovery Mode:
-----------------------------------------
[DEBUG] FMAP: area RECOVERY_MRC_CACHE found @ 650000 (122880 bytes)
[DEBUG] APOB hash matches flash
Change-Id: I93f357e407c98b6e5fca495f4f779fad54a3430f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: Icc0cb79c06614aa2976d250dc73b8dc4040fd28c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73119
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This commit separates setting FSP debug params from the rest of code and
configures FSP serial port parameters. Other ports (0x3E8 and 0x2E8)
are omitted since Elkhart Lake FSP only supports 0x3F8 and 0x2F8.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I84f7c19a7c2fd5a4db18f5a37e1c667da017aace
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Remove world-facing microphone for xivu360.
Switching to world-facing camera will use the
user-facing microphone to record sound.
BUG=b:263927799
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
BUG=b:269786649
TEST=build and test USB2 port function works fine
BRANCH=dedede
Change-Id: I63928a0d8ce6b2365250fd96572f4a2db948c19d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73204
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sam McNally <sammc@google.com>
|
|
To support an RPL SKU on constitution, it must use the FSP for RPL.
Select SOC_INTEL_RAPTORLAKE for constitution so that it will use the RPL
FSP headers.
BUG=b:267539938
TEST=emerge-brask intel-rplfsp coreboot
coreboot-private-files-baseboard-brya
Change-Id: Ie4f5eb6ebb372ad07308ff25c9eb69a83793c656
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73246
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update override devicetree based on schematics.
BUG=None
TEST=FW_NAME=constitution emerge-brask coreboot
Change-Id: I883a806950821e6306242975764930035a94888e
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73110
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Remove `fixme` from gpio.h since it has been addressed.
BUG=none
TEST=Only a cosmetic change
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I79a2493dba6becd4b8c1ebf37e452a5a173eb396
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Update ec_commands.h from the EC repo at:
"8441cf4 Add host event: EC_HOST_EVENT_BODY_DETECT_CHANGE"
This is an exact copy of the EC repo's ec_commands.h with the
exception of updating the copyright message.
BUG=b:261141172
BRANCH=none
TEST=built coreboot for skyrim
Change-Id: I9892c0c3518f63d357459861e8fa1b7f5f494e68
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73258
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Because the ChromeOS boards don't fill a manufacturer in for the memory
SPDs, that information isn't available from the FSP. We can get the
Manufacturer ID based on the memory name from CBI instead. Use this
information to fill in an ID so that the manufacturer name is available
in the SMBIOS information.
BUG=None
TEST=Look at dmidecode output
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I810c3191180dd3b566d7ea64006f29b625b10526
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
There is a Nanya device used on one of the Google Guybrush devices,
so add it to the list of SPD manufacturer names.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia449f4d14385cdd5a2548e2a05e3928ea3602c12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73254
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The DMI error correction type was not being filled in, so was reporting
as "Error Correction Type: <OUT OF SPEC>". This patch fixes that.
Since it's now filling in information for both Type 16 & 17, rename
the function to reflect that.
BUG=None
TEST=dmidecode now reports the type correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6b51612d808c63de1acd2be952cb6c152f8a1be5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
SimNow does not support the Birman EC, so skip the EC configuration
steps when building for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I6e879a13a119d593674d3403d4e1b32e0e244d9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ia7e594ca2b6ea3cd9d6f60e7dcd1ba6ebabf85cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add option for mainboards to target builds for SimNow.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id765437b69f1bc3a9f9d7858edcd27e687d5a7f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
I can't commit to the time investment required to mentor properly and
it's unfair to potential mentees to make them think otherwise.
Change-Id: I07d0fe048d4cda8ec9181ef0ee09185fa1682af4
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73288
Reviewed-by: ron minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move 'asmlinkage' before the function type for consistency.
Change-Id: I293590ef917b78c6ed3d151cd0080e42d0f10651
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73259
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I42856424d3b55107f1758fb05f7ddbee3550d8b2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73200
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
'pragma Compiler_Unit_Warning' is removed upstream:
https://gcc.gnu.org/git/?p=gcc.git&a=search&h=HEAD&st=commit&s=pragma+Compiler_Unit_Warning
Fix:
GCC libgnat-x86_32/lib/gnat/interfac.o
interfac.ads:36:08: warning: unrecognized pragma "Compiler_Unit_Warning" [-gnatwg]
Change-Id: I6d7efab132441dd3cc62a53b7322e9fd355e5059
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch optimizes CPU MP Init related configs being used within
multiple SoC directory and moving essential configs into common code
to let the SoC user to choose as per the requirement.
TEST=Able to build and boot google/kano and google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I12adcc04e84244656a0d2dcf97607bd036320887
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Change-Id: I1b43dbb8cdc748960f25d7b0629aa81528a2a476
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Changing the pointer outside the function is not allowed.
Check if it overflows everytime it changes.
TEST=Binary identical on amd/birman amd/chausie amd/majolica
amd/gardenia pcengines/apu2 amd/mandolin
Change-Id: I2c295b489d833201f1ba86a7759ea7dc0e1e672f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Remove ACPI node for pen eject event to meet project design.
BUG=b:265106657
TEST=emerge-skyrim coreboot chromeos-bootimage
Change-Id: I732de49c6319397d93671c48a6518c7c7e955fdc
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73154
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This reverts commit 363202b43589ec240c4a0c8f5b449fbd5c1333f8.
Reason for revert: Seeing some bit flips on the SPI bus, but cannot
repro reliably on local builds. Going to downgrade back to 50 MHz
to see if builder builds are more stable on each variant as a result.
Signed-off-by: Shelley Chen <shchen@google.com>
Change-Id: I4fe76bac915e3b3c794821cd160a66824e38ea83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73214
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 3 (0011)
BUG=b:265190498
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I860f10552e4e4180e09ab805ca82b108fdc8f21a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73049
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 3eb17b91daac0b3acaffb01568d724d23c6f0eea.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This reverts commit 0e0f9e51c4c4f190cbe7ef5bffa138601c644d3c.
Reason for revert:
PLTRST only keeps 18xms and it's too short for eMMC disk fully reset.
Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Update GPP_E12,GPP_E13,GPP_H19 in ramstage.
Update GPP_F11 in bootblock.
TEST=emerge-brask coreboot
Change-Id: Icdca7f574282da140ec64cea9cdda3ebccbe3eb8
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73194
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Pablo Ceballos <pceballos@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now we use ctx.rom. Remove the wrong statement releasing null
pointer.
Change-Id: I134335ed741dc067e232621106f2057e50ba6a1a
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Elkhartlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes elkhartlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3186f509c63b3a892c72cb1fa08fc094735d6eeb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73245
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib94e4662c735b1c31c8dfca1cfa881e6fa4070fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73244
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Cannonlake based SoCs uses Intel's Management Engine (ME), version 12.
This patch selects ME 12 specification defined at common code and
removes cannonlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ifc64cf63736bb730492b1732a22669a0415816a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Jasperlake based SoCs uses Intel's Management Engine (ME), version 13.
This patch selects ME 13 specification defined at common code and
removes jasperlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Icf4bc651e94d6ec977ed8f2381d7184337dc1ea5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73139
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tigerlake based SoCs uses Intel's Management Engine (ME), version 15.
This patch selects ME 15 specification defined at common code and
removes tigerlake SoC specific ME code and data structures.
BUG=b:260309647
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: If4fbfd7c591794ed945c1e9e8487a9e9723c7551
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73138
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Meteorlake based SoCs uses Intel's Management Engine (ME), version 18.
This patch selects ME 18 specification defined at common code and
removes meteorlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I36ee66f94f0c37ab6a134e79e49da9abc83b93cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73137
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch adds ME specific source code at common location in order to
reduce maintenance efforts at SoC level and improve readability. The
functionality and code are redundant for various SoC platforms and
require more maintenance.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic6622662fd3b8bcc9d9ac8bd6ffa732f5d78801a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73133
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes ME specification datastructures for various ME
versions. Including the ME specification in common code will help
current and future SoC platforms to select the correct version based on
the applicable configuration. It might be also beneficial if two
different SoC platforms would like to use the same ME specification and
not necessarily share the same SoC directory.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I83df41d7180d2df419849a0c01c728ff0fe75378
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73129
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch includes ME specification configuration for various versions,
which will allow SoCs to get ME support by selecting the correct
version.
BUG=b:260309647
Test=Build verified for brya and rex.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I817d14e52b0d353bbb4316d6362fcb80cbec3cda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73128
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
With this change, SoCs implementing selective GOP init will need to
select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to not assert on compilation.
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: Iac7e06863764a9f21c8a50fc19050cb5a6627df2
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Rather than explicitly checking for Recovery or Developer mode via
vboot, use display_init_required() so that vboot is not required, and
other instances where the display is needed pre-OS (such as when
applying a critical system update) are covered as well.
Select VBOOT_MUST_REQUEST_DISPLAY in order for display_init_required()
to function properly (and not assert on compilation).
BUG=b:255812886
TEST=build/boot skyrim
Change-Id: If2fee71bcc11468fd2db0abaafe4ea35e2953993
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The headers added are generated as per FSP v4031.01
BUG=b:270416522
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Cq-Depend: chrome-internal:5513169, chrome-internal:5511170
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ia21807ee71c98489fd96f870c2d61f54e094c3d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Define some actions based on probe results for audio:
- Disable the SoundWire GPIOs when I2S option is selected.
- Disable the I2S GPIOs when SoundWire option is selected.
- Disable all the GPIOs when no audio is enabled.
BUG=b:269497731
TEST=Test that GPIOs are configured based on the current
value of the fw_config field in cbi.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0ed452a0d08e6779add318d9bbd1e97b50b6aea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In order to improve gpio merge mechanism. Change iteration override
to padbased table override. And the following patch will change fw
config override with ramstage gpio table override.
Port of commit 7aef2b1294f2 ("mb/google/nissa: Apply gpio padbased
table override")
BUG=none
TEST=Verify devbeep at depthcharge console
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2ee86bbec7d25a35d726f29ad79891f1054bf52c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73182
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The reset bit mapping was incorrectly assigned to GPIO groups. The
reset mapping for Community 0 actually reflects the GPD reset mapping.
Change the Community 0 reset mapping to the correct default map and fix
the GPD reset mapping.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2b9d093ca7ea0f5087f49671ca457c0b45927918
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I5f534a898de4ba58ac7d65c5bd6ee10eafa648e4
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control
the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always disabled
for RPL & ADL-N based ChromeOS platforms.
It is not disabled for ADL-P based platforms because ADL-P FSP relies
on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit
sync doesn't occur if no MBP HOB, so it results S0ix issue. This
limitation is addressed in the later platforms so creation of MBP HOB
can be skipped for ADL-N and RPL based platforms.
This made skip_mbp_hob SOC chip config variable redundant which is also
removed as part of this change.
BUG=none
TEST=Build and boot to Google/Taniks.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In the current Kconfig option MEDIATEK_BLOB_FAST_INIT, the meaning of
"BLOB" is unclear. Add "DRAM" to the name.
BUG=b:204226005
TEST=./util/abuild/abuild -t GOOGLE_STEELIX -x
Change-Id: Ida7bda770f1d1a40cae205b08c8cb22f2329e49f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73155
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MX98357A is not a soundwire codec, so move it out of
drivers/intel/soundwire node.
BUG=none
TEST=Build and boot MTL-P RVP to Chrome OS. Verify I2S audio card
enumeration and no max98357a entry under /sys/bus/soundwire/devices.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I24fc7084ea18445c341eed012cfacde8de126fd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Usha P <usha.p@intel.com>
|
|
Setup FW_Config for our project.
Configure USBHub\PIXA Touchpad\Audio(rt5682s & alc1019).
BRANCH=None
BUG=b:262798445, b:268621319
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I2c590ae36d4d089f70e1799189cd414f825e5b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chao Gui <chaogui@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This reverts commit 272c9c07bd9c7dcd684614c67487504ce06f7a36.
Reason for revert: Sorry was going to give +2 but pressed the submit
button and accidentally merged this out of train.
Change-Id: I8a2c6407832bdcf3d475209356501f8fc3672f6b
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73213
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Alderlake based SoCs uses Intel's Management Engine (ME), version 16.
This patch selects ME 16 specification defined at common code and
removes alderlake SoC specific ME code and data structures.
BUG=b:260309647
Test=Build verified for brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I94cb8a9cbb6167d1a11a012efbd6a135a8692969
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73135
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes MP init on xeon_sp SoCs which was broken by 69cd729 (mb/*:
Remove lapic from devicetree).
Alderlake cpu code was linked in romstage but unused so drop it.
Change-Id: Ia822468a6f15565b97e57612a294a0b80b45b932
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Use the existing IO_APIC2_ADDR definition instead of a magic value.
TEST=Timeless build results in identical image for pcengines/apu2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ee039e23309fdae0d614bb1fb0610d82564bf3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73186
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The coreboot-common acpi_create_fadt writes a pointer to the FACS table
into both firmware_ctrl and x_firmware_ctl_l FADT fields and sets
x_firmware_ctl_h to zero. When x_firmware_ctl_[l,h] is non-zero, the
pointer in firmware_ctrl will be ignored, but that's what is already
done on Cezanne and newer.
TEST=Linux doesn't complain about any new ACPI problem on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9eab4dcf828f28a60c6312ec96872aac4cfb266
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id2d24a9b8d5b04271eb4da6a622b5bba66dbc501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73188
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The FADT data structure is zero-initialized in acpi_create_fadt which
then calls the SoC-specific acpi_fill_fadt function, therefore it's not
needed to assign 0 to the ARM_boot_arch FADT field in acpi_fill_fadt.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ica968db1228a2d63e83f2b6c4ea57c5f02bf1504
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73187
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate
when the state of charge drops to low_battery_shutdown_percent.
BUG=b:255465618
TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898)
Verify system resumes from s0ix and then enter S5 on nivviks with steps:
1. disconnect AC
2. powerd_dbus_suspend --disable_dark_resume=false
3. fakebatt 5
4. fakebatt 4
Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Add common device tree used for EGS platform. Also add register
setting shared for all EGS platform.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I812f621ee9d1643fd4fa35df92443d64f7aaabc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This reverts commit 2e6fa8206e0a3bdd2e53542b6377fe2b37e3f26e.
Reason for revert: causing `redefinition` issue.
src/mainboard/google/poppy/variants/nami/gpio.c:527:26: error: redefinition of 'variant_romstage_gpio_table'
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
src/mainboard/google/poppy/variants/nami/gpio.c:426:26: note: previous definition is here
const struct pad_config *variant_romstage_gpio_table(size_t *num)
^
Change-Id: I107cce8bf3a5bf38edb39b9d46512ee0d467d354
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73210
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The current clock register definition is wrong, which results in wrong
audio sampling rate. Fix it by adjusting the POSTDIV registers of
APLL1-APLL5.
TEST=build pass
BUG=b:250459803, b:250464574
Change-Id: I7a627169593f41906856777d738c6b13ff72d5a0
Signed-off-by: Johnson Wang <johnson.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73134
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
MT8188 supports port0/port1 download. The hardware needs a trapping pin
to select the port to use. When port1 is selected, the phy of port1 will
be switched to port0. That is, port1 connector will be the physical line
of port0. Since port0 phy isn't initialized in coreboot, switch back to
port1 phy.
BUG=b:269059211
TEST=can detect USB2 devices in depthcharge.
Change-Id: Ic97d0bd9d0233883196b2e73ac2a22cd8ea9466b
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73170
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
USB2 port 6 may be used for a PL2303 USB to UART bridge, so enable the
port.
BUG=b:269690930
TEST=kernel can detect a PL2303 USB device
BRANCH=dedede
Change-Id: I0ba421c3a502e69d101de40bbd31122211d3fb05
Signed-off-by: Sam McNally <sammc@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Add functionality such that the FPMCU is power cycled long enough
on boot to ensure proper reset.
This solution relies solely on coreboot to sequence the power and reset
signals appropriately (150ms on boot).
BUG=b:245954151
TEST=Confirmed FPMCU is still functional on Nami.
Confirmed power is off for 150ms seconds on boot.
Confirmed RCC_CSR of FPMCU indicates power cycle occurred.
Confirmed reset is de-asserted approx 3ms after power application
(target >2.5ms)
Change-Id: I21eb85dc11e0ea0eb5de8a6092b01663d3c3df91
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68820
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Phoenix2 VBIOS PCI DID is 15c8 though the VBIOS image uses a different
PCI ID i.e. 0x1205, so we need to implement map_oprom_vendev for the SoC.
Change-Id: I7eef5eb41b781f02abb9dd4098e92a8652a431f5
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
VGA defineds the extended ASCII set based on CP437, but there is a bug
on printing them: in vga_write_at_offset(), we perform a bitwise or
between 'unsigned short' and 'signed char':
```
p[i] = 0x0F00 | string[i];
```
If we want to show an extended ASCII character, string[i] will be
negative and this bitwise operation will fail due to their implicit
casting rule: convert signed char to unsigned short by adding 65536.
To fix this, we need to cast the string to unsigned char manually
somewhere. Since we still want to leverage the built-in string utilities
which only accepts const char*, we still preserve the original
prototypes before, and cast it until we write into the frame buffer.
BRANCH=brya
BUG=b:264666392
TEST=emerge-brya coreboot chromeos-bootimage
and verify drawing characters with code > 127.
Change-Id: I9cd65fe9794e5b0d338147924f28efd27fc8a1e8
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ice15f0ce591104a2ace186f9049748219c2bc097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Based on product spec v1.4, update T3 timing from 180 ms to 150 ms.
BRANCH=none
BUG=b:262734395
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I0d8f1e008276fccdfbb8c76cfebaccbe71160b64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73130
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
After first recovery request coreboot would get stuck in bootloop with
VB2_RECOVERY_PREAMBLE as recovery reason due to not checking whether
coreboot is alread in recovery mode, and calling failing code.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: Idc947a1d150ff6487cf973b36bf4f0af41daa220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Package C state demotion is now disabled for all RPL SoCs from within
soc/intel/alderlake/fsp_params, so no need to duplicate that in the
skolas devicetree.cb.
BUG=268296760
BRANCH=firmware-brya-14505.B
TEST=Boot and verified that S0ix issue is resolved.
Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The EFS entry at offset 0x14 can point to either the first level PSP
directory table or to the PSP combo directory structure that was used
before the introduction of the AMD A/B recovery scheme. This scheme is
not to be confused with the VBOOT scheme. The PSP verstage code checks
if the header this entry points to begins with the PSP_COOKIE, which
indicates the entry is a first level PSP directory table. Due to that,
the EFS entry at offset 0x14 is always expected to point to a PSP
directory table, so rename combo_psp_directory to new_psp_directory to
match the actual usage. This EFS entry that points to the PSP directory
table is called new_psp_directory, since the entry at EFS offset 0x10
was used on some early AMD chips to point to the older PSP directory
table and that one is already called psp_directory. amdfwtool uses the
same naming scheme for those two PSP directory table pointers.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I10f19ee63f8d422433dba64402d84fd6bb9e0f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73083
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ctags tool (called by ctags-project target) currently complains
about not finding certain files.
The project_filelist.txt generation includes the compiler
generated "*.d" files, except for files found in build/util. Most file
paths in these "*.d" files are file paths relative to the root
directory of coreboot. Some projects though are compiled separately from
coreboot (e.g. payload, vboot, util). Some of these (e.g. util, vboot)
are also put into the build directory of coreboot and relative file
paths are relative to these projects instead of coreboot. This has the
uncanning side effect that the ctags Makefile target can't find these
files, since they are not relative to the coreboot root directory.
This patch also excludes the build/external directory from those files,
since they contain 'separately' compiled projects like 3rdparty/vboot.
That fixes the ctags-project Makefile target.
Change-Id: I16294171c29a0d5fd25a31018846f1013e130ee0
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71517
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Select NO_S0IX_SUPPORT for `starlabs/starbook` and `atlas/prodrive`
so their configurations are unchanged.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I718952165daa6471f11e8025e745fe7c249d3b46
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72800
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report `4` in `_S0W` only when D3COLD_SUPPORT is enabled, as if it
is not, it will break S3 exit.
When D3COLD_SUPPORT is not enabled, return `3` (D3Hot).
This fixed S3 exit on both TGL and ADL. Tested on StarBook
Mk V and Mk VI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3a4b89132b594ad568a5851137575f921f8e2a2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72765
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If BIOS_DONE MSR is supported, set it after ReadyToBoot, because FSP
programs certain registers via Notify phase ReadyToBoot and it cannot
be modified by FSP after coreboot has set BIOS_DONE MSR, therefore we
try to set BIOS_DONE MSR as late as possible to avoid this.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I4f19a7c54818231ebbccd2b6f8b23f47b117eb1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71964
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Add fast_spi_set_vcl() to be called by the SOC lockdown function if SPI
Vendor Specific Component Capabilities are desired.
Change-Id: I6d9b58e90fa16c539b90c6b961862e97e1bf29a2
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72478
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is not more necessary to patch binutils, we can
pass an argument during build time to not build docs.
Regenerate binutils-2.37_no-makeinfo.patch.
Change-Id: If600f0bb46db5f84956940683a7adc83eaca01e5
Signed-off-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73115
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I99ded00fa6dadb494c1523d00063dbc1fde95614
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73093
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for LP5X 8533Mbps in SPD tool.
BUG=b:263189532
TEST=None
Change-Id: I72b02514f68647dda996822f910db8bc93f61ca4
Signed-off-by: Kyle Lin <kylelinck@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73038
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marx Wang <marx.wang@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To make MIPI/eDP panel functional on unprovisioned devices, it requires
passing SKU ID and panel ID info to the payload(depthcharge) to load the
corresponded device tree for kernel.
BUG=b:247415660
TEST=cbmem -1 |grep "SKU Code".
Change-Id: Id2254729b7bd621d1e9bc520e8f40916d0f81030
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73076
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch adds enable/disable FSP DisableEnergyReport feature
option to be used in devicetree for power instrument purpose.
BUG=None
Branch=None
Test=Build and boot MTL RVP.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Change-Id: I58d4aea28ee2561d2ed73260c40cb22ce3fdd135
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73061
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Replace the magic number with the CPUID_FROM_FMS macro to make it easier
to read.
TEST=Resulting image of timeless build for pcengines/apu2 is identical
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I15480dc883b65b5ffaf0cd38cf4e1f7b2222022e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73069
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of having two entries for two different steppings of the same
family and model combination using the CPUID_EXACT_MATCH_MASK, just have
one entry that uses CPUID_ALL_STEPPINGS_MASK to cover all steppings.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0118bb9b4b0be4d954a657d50789addca08a784e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73068
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The platform supports a discrete LPC TPM module. However, ME firmware
enables PTT by default and descriptor is configured for SPI TPM on the
platform's original firmware. So disabling PTT in ME is not enough,
because it falls back to SPI TPM. Ensure PTT is disabled in ME and SPI
TPM is disabled in descriptor soft straps.
TEST=Boot VP4650 and see LPC TPM is recognized by coreboot.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3764e085f2eb5ae957b9087d150320def7af4fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If1b4f9c8245a082ff875ae9c6102a1c45e677d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Based on product spec v1.4, update T3 timing to 150 ms from 300 ms
BRANCH=none
BUG=b:269041202
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the Elan touchscreen works fine.
Change-Id: Ie5bd4bc2c8be2e43470edd374af0623162067497
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Updating from:
262f0c97f2fb microcode-20221108 Release
Updating to:
2be47edc99ee microcode-20230214 Release
This brings in 1 new commit:
* 2be47edc99ee microcode-20230214 Release
Change-Id: I3db14d7788ef93b320602e744ba322eb7f754a3c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Some users of MSI Z690-A board reported non-working IGD display
during post using various CPUs. As not all PCI IDs were hooked,
coreboot didn't detect GOP-provided framebuffer nor passed the
framebuffer information to the payload, causing a black screen.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I07584e07182ee56b61b6f751100431589d1cbe83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elias Souza <eliascontato@protonmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ic3c22ac101a2ff44f97b2ac3fe3c0a89391718de
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ic46e1663609068439069f666beca17ed76c679f0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69331
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I87e383ce2f28340dbc3c843dbf2ed0e47c00a723
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Duplicated branches found using 'Wduplicated-branches' GCC flag.
Change-Id: I252ea6aefb6d6c85135e640ba8deaa118be38f5e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: Ief8dd9c7f7b82e1cd62de5bc1a361432b0eac4ca
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I3a846d8e4b70ccb3e6fde448c00376cd0088716c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|