summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-03mb/system76/{adl,tgl}: Add FMD filesTim Crawford
Replace `CBFS_SIZE` with FMD files to declare regions and sizes. This will be used to lock BIOS region (except SMMSTORE) on boot. `CBFS_SIZE` was incorrectly set to 10 MiB, so this also corrects the BIOS region size to match the FIT values. Change-Id: I0f068f4d9b376f12b46faa5bb0c6a08e6cb744d8 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76155 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Add space for ramtop in CMOS layoutTim Crawford
Fixes building when `USE_OPTION_TABLE` is selected. Change-Id: I4fb017aa549b24eda6b9e0356bc1776d4044c95d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76154 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select CBFS SMBIOS hooksTim Crawford
Multiple users have requested to have the DMI values for product UUID and serial number be populated. Enable the drivers so that we may set them when flashing or updating firmware. Change-Id: I710363d9df626d51756a265f0099f26ef28411c2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76153 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03mb/system76: Select TPM read delay on all boardsTim Crawford
The Infineon chip occasionally fails Startup or Resume. Adding the delay makes it work more reliably. Change-Id: I4a8f98633154888e2167a3d55192b86e13ffcb62 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76095 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Remove PL4 valuesTim Crawford
System76 EC since system76/ec@99dfbeaec3b8 sets PL4 values through PECI based on AC state for all boards. Remove the static PL4 values from coreboot since they won't be used. Ref: https://github.com/system76/ec/pull/353 Change-Id: I66bc547ef1b3419fc677fcbdd5ba5d8cc8e14189 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75333 Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03ec/system76/ec: Do not call reset on wakeTim Crawford
Resetting the device will cause the keyboard backlight and airplane LED to lose their state. Change-Id: I2f46542fb6b32c479b01335149c9190f6fa1421f Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75275 Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Jeremy Soller <jeremy@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/rpl: Add Oryx Pro 11 as a variantJeremy Soller
The Oryx Pro 11 (oryp11) is a Raptor Lake-H board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard - I2C HID touchpad - Both DIMM slots - Both M.2 NVMe SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S3 suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 6.2.7 Change-Id: I0d29e03cdde523a95ae6d174a9948f4c119cca6e Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/tgl-u: Enable reporting CPU C10 state over eSPIJeremy Soller
This allows the EC to detect C10 using eSPI instead of a dedicated pin. Change-Id: I58c03d91466b869d53c9ee2cbbe50adc32539494 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/adl: Add Gazelle 17 as a variantJeremy Soller
The gaze17 comes in 2 variants due to differences in the discrete GPU and network controller used. - NVIDIA RTX 3050, using Realtek Ethernet Controller - NVIDIA RTX 3060, using onboard I219-V Ethernet Controller Tested with a custom TianoCore UefiPayloadPkg payload. Working: - PS/2 keyboard, touchpad - Both DIMM slots - M.2 NVMe SSD - M.2 SATA SSD - MicroSD card reader - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined headphone + mic 3.5mm audio - 3.5mm microphone input - S0ix suspend/resume - Booting to Pop!_OS Linux 22.04 with kernel 6.2.6 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Discrete/Hybrid graphics: Requires NVIDIA driver - mDP/HDMI displays on 3060 variant: Requires NVIDIA driver - Detection of devices in TBT slot on boot - S3 suspend: MP init eventually fails Not tested: - Thunderbolt devices Change-Id: Ib12ac47e8f34004f72e6234039823530511baea7 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/system76/tgl-h: Disable D3coldTim Crawford
Disable D3cold to prevent issues with Thunderbolt not working after S3 suspend. Change-Id: Ib4362783546aa01f0f8f5baaad817ee76be9c39c Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2023-07-03soc/amd/*: Utilize get_fmap_value() Makefile function where possibleMatt DeVillier
Replace: $(shell awk '$$2 == "xyz" {print $$3}' $(obj)/fmap_config.h) with: $(call get_fmap_value,xyz) to improve code readability/maintainability. Change-Id: If6859108c7d5611a63fc38909dc75195bfb1d59a Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76168 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-07-03Makefile.inc: relocate get_fmap_value() here from soc/intel/common/block/cseMatt DeVillier
Move this function to the root Makefile.inc since other Makefiles use the exact same function call. Will allow for deduplication in AMD SoC Makefiles in a follow-on commit. Change-Id: I56a50e21b27a4cd6ce1a08a3aea338c63322a6b2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76167 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/nissa/var/pujjo: Tune SX9324 register for pujjoteen5Leo Chou
Update SX9324 register settings based on tuning value from SEMTECH. BUG=b:279510275 TEST=Check i2c register settings on Pujjoteen5 and confirm P sensor function can work. Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: Idc9a2dc817e027551e209c0a26eeebad398f710c Reviewed-on: https://review.coreboot.org/c/coreboot/+/75900 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 0Jan Samek
It's been decided not to use any of the USB 3.0 ports on this board. This patch disables the remaining USB 3.0 port 0, after the port 1 has already been disabled in commit d0627c7595fe ("mb/siemens/mc_ehl3/devicetree.cb: Disable USB 3.0 port 1"). BUG=none TEST=None of the USB 3.0 ports functional anymore after boot, the USB 2.0 ports continue working. Change-Id: I28465f1c5e6d3167c649da898ec60d8bb97093e2 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75836 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/siemens/mc_apl1: Fix wrong register maskingMario Scheithauer
With the previous instruction the complete register was set to '0'. Correctly, only the bits 23:16 must be masked. Change-Id: Idd6e70dcb42c69cf3bc5d36db993e6def52eba58 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76177 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-07-03mb/siemens/mc_apl5: Correct the Tx signal from SATA port 0Mario Scheithauer
Because of an incorrect transmit voltage swing, the signal must be adjusted. The factor of slices for full swing level can be corrected via the High Speed I/O Transmit Control Register 3. The appropriate value of 0.7 V was determined by using an oscilloscope. Change-Id: I965960004ca44f1b37b16ce6484000fa7fd8ad90 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-07-03mb/siemens/mc_apl1: Rename macro 'TX_DWORD3' to 'TX_DWORD3_P1'Mario Scheithauer
The offset '0xa8c' for the High Speed I/O Transmit Control Register 3 refers to SATA port 1 only. To make this clear, change the name of the define from 'TX_DWORD3' to 'TX_DWORD3_P1'. Change-Id: I09d17eeffbe84939297e739586f6b74ed3e2258b Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76174 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-07-03mb/siemens/{mc_apl3,mc_apl5,mc_apl6}: Remove TX_DWORD3 macroMario Scheithauer
A correction of Tx signal from SATA interface is not necessary on these boards currently. Therefore remove the define and the corresponding code on mc_apl5. Change-Id: I5092ee128cb35e126069d18bb3cbd635e01bbcdb Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-07-03mb/google/nissa/var/joxer: support for different WiFi SAR tablesMark Hsieh
Set the WIFI_SAR_ID field in FW_CONFIG to selcet the correct SAR table. BUG=b:285477026 TEST=emerge-nissa coreboot and check the SAR value Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Ibea62c77ecad9b2c475452b706779e4cfc6b06d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76144 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/nissa/yaviks: Tune eMMC DLL value for boot issueChia-Ling Hou
Resolve boot issue by tuning RX HS50 and HS200. BUG=b:265611305 TEST=Reboot test 2500 times pass Change-Id: I8a2727dc0ce9dc86c6bfb6d85567afee1734db62 Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75812 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
2023-07-03mb/google/kahlee: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:283245785 BRANCH=firmware-grunt-11031.B TEST=Observe kernel ec panic handler run when ec panics Change-Id: I8eeb5c0935d0531c21bcf4cd3d4fd9dc80b54f79 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward Hill <ecgh@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-07-03mb/google/rex: Set AUX orientation at SoC to follow cable for kb8010Caveh Jalali
This configures the SoC to flip the orientation of the AUX pins to follow the orientation of the cable when using the kb8010 retimer. This is necessary when there is no external retimer/mux or the retimer/mux does not implement the flip. The kb8010 retimer does not support this feature, so let the SoC do the flip. BUG=b:267589112 TEST=verified DP-ALT mode works in both cable orientations on rex with reworked kb8010 DB by flykt@ Change-Id: Iad093e27617b80f8301008deb00b57fb9b3a48ba Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76137 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-03mb/google/kahlee: Enable Secure OSJon Murphy
Secure OS was disabled on Grunt devices since it isn't used. This reduces the attack surface and is meant to mitigate potential security risks. However, this prevents users from using an alternate OS. Enable Secure OS upstream to allows users to use Windows, and ensure that it is still disabled in the chromium repo. BUG=b:287630343 TEST=Builds with Secure OS included. Cq-Depend: chromium:4620881 Change-Id: I213aebc41cae300ecee8c01fc5c7687f7e7f5ee3 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-07-03mb/hp: Add new port for compaq_8300_elite_usdtRiku Viitanen
New port based on autoport. Autoport worked with minor tweaks, but fan speeds went almost immediately to the maximum. They are controlled by the NPCD379 Super I/O which isn't supported by coreboot. But coreboot already has code for NPCD378, which HP Compaq 8200 SFF makes use of. So SuperIO configuration was copied from the 8200 SFF port. It seems to work without any issues in "normal" use. Most importantly, fan speed control seems to work correctly. However this means that some of the SuperIO LDNs may be configured incorrectly. See the comments on Gerrit for more information. The following is tested and is working: * Native raminit with both DIMMs * Libgfxinit textmode and framebuffer on both DisplayPorts and VGA * External USB2 and USB3 ports: they all work * USB 3.0 SuperSpeed on Linux-libre (rear, 4 ports) * Ethernet * Mini-PCIe WLAN * SATA: 2.5" SSD and optical drive bay * Booting Live Linuxes from DVD and USB with SeaBIOS 1.16.1 * GRUB (with Libreboot config) * PS/2 keyboard and mouse * S3 suspend and resume, wake using USB keyboard * Headphone output, line out, internal speaker * Wake on LAN * Rebooting * CMOS options & nvramcui Untested: * mSATA slot. The SATA port needs to be enabled on devicetree too, but I'm unable to test due to lack of hardware * Line in, mic input * MXM graphics card * EHCI debug Not working: * Mini-PCIe USB: I couldn't get it working on vendor BIOS either, so maybe it just isn't present * PS/2 keyboard wake from S3 Change-Id: I2dc31778c2aa1987d5acdf355973a203dd0bb3a3 Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74906 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-03mb/google/dedede/var/taranza: Add more USB configurationSheng-Liang Pan
- remove usb2_ports[5] since taranza doesn't have PL2303. - add usb2_ports[6] and usb3_ports[1] for Type-A Port A4. BUG=b:288094807, b:278167978 TEST=emerge-dedede coreboot chromeos-bootimage verified all the USB port works Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I7b411c21271497ba386143140aa8cfbb17a1a111 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76186 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Enable LAN0Subrata Banik
This patch performs below operations to enable LAN0. - Complete the LAN PEREST power sequencing - Program the SRC_CLKREQ (GPP_D20) with correctly. - Add overridetree.cb entry to configure the LAN0 device. BUG=b:289395519 TEST=Able to boot google/ovis with LAN0 being enabled. Change-Id: I91b0a76395ade4459cf8705c333728a71f95df14 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76213 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Enable LAN1Subrata Banik
This patch performs below operations to enable LAN1. - Add overridetree.cb entry to configure the LAN device. - Complete the LAN1/SD PEREST power sequencing BUG=b:289395519 TEST=Able to boot google/ovis with LAN1 being enabled. Change-Id: Ifb67cb8e6fc03e3ff14b1b3d8382322fd0b3aeff Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76212 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_V12 PADSubrata Banik
This patch configures GPP_V12 aka SOC_SLP_LAN_L properly as per the Ovis schematics dated June'23 to ensure LAN port is not in sleep. BUG=b:289395519 TEST=Able to measure SLP_LAN PIN and confirm it's deasserted. Change-Id: I1fe8715862823149c8a1f05e3e4463a615fbbbce Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76211 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_C10 PADSubrata Banik
This patch configures GPP_C10 aka EN_LAN_RAILS properly as per the Ovis schematics dated June'23 to ensure LAN ports having power. BUG=b:289395519 TEST=Able to measure LAN port power is enabled with this CL. Change-Id: I3f4d611313325dba66905e0c8ef391765a1fe7a7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-02util/docker/coreboot-sdk: Drop legacy libftdi packageFelix Singer
flashrom does not support libftdi 0.20 anymore and it's not used by anything else. Its build systems (Makefile and Meson) only reference libftdi1 and it still compiles fine without the legacy package. Thus, drop it from the package list. Change-Id: If1b575bc9abfd192e93811a83d8615bed61eba0c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-07-02util/docker/coreboot-sdk: Drop legacy libusb packageFelix Singer
flashrom does not support libusb 0.1 anymore and it's not used by anything else. Its build systems (Makefile and Meson) only reference libusb1 and it still compiles fine without the legacy package. Thus, drop it from the package list. Change-Id: Ib9b7530e5b707e12fbf3f8058999456dc1f8dff4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-07-02crossgcc: Upgrade IASL from 20230331 to 20230628Elyes Haouas
Changes: https://acpica.org/node/204 Change-Id: I4a1be7ffa6cb363d3fe0cddc59f0f4283fcc5257 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-30mb/google/dedede/var/taranza: Disable EXT_VRSheng-Liang Pan
The taranza removed the APW8738BQBI and "disable_external_bypass_vr" should be set to "1" to disable. BUG=b:288978340 TEST=emerge-dedede coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I0a849fbfacba1d200c969c66bb058863d7ab3085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-30mb/google/rex/var/ovis: Fix mux change as per schematicsSubrata Banik
This patch updates the mux connection to reflect the Ovis schematics dated June to ensure Type-C1 is able to work in DP-ALT mode. BUG=b:289300284 TEST=Able to get display over Type-C1 port. Change-Id: I223eb3a96e6a1b3abb4168fcf59c0df04c1b4498 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76149 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-29acpi: Set checksum for SPCR tableNico Huber
This was missed recently when adding the table. Linux complains about the missing checksum, e.g. [ 0.186070] ACPI BIOS Warning (bug): Incorrect checksum in table [SPCR] - 0x00, should be 0x87 (20210730/tbprint-173) Tested with QEMU/Q35, albeit with changes to the special handling for ACPI with QEMU. The warning goes away. Change-Id: I0086a3e8c5b3a06da9edf40a7a288c534fc5a6b2 Signed-off-by: Nico Huber <nico.h@gmx.de> Fixes: commit 90464073e4a1 (acpi: Add SPCR table) Reviewed-on: https://review.coreboot.org/c/coreboot/+/76158 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29soc/amd/phoenix/Kconfig: Drop TODO for FSP_DMI_TABLESKonrad Adamczyk
BUG=b:288520486 TEST=In kernel, dump `dmidecode -t 17`. Change-Id: I1a8aae12ec449fe921814a6e363306fced969367 Signed-off-by: Konrad Adamczyk <konrada@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76109 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-29soc/amd/common/fsp: Fix dimm_num assignmentKonrad Adamczyk
The dimm_num shall be dimm, not channel. BUG=b:288520486 TEST=In kernel, see output from `dmidecode -t 17`. Observe that Locator reflects proper location of the module. Change-Id: Id876a5c245ed1a145c930b3456830d7b42780b74 Signed-off-by: Konrad Adamczyk <konrada@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-29soc/intel/meteorlake: remove unused tcss mailbox codeKane Chen
In mtl, there is no MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE So, this patch removes unused code related to MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE ADL also removes this code, see cl:62861 BUG=b:288976547 TEST=Tested on Screebo and DP/USB are working as expected after suspend/resume Change-Id: I5a4b26c38ec3f5fe1d81fd70f8c2196d0e5b84c3 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76126 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/nissa/var/gothrax: Add GPIO table for gothraxYunlong Jia
Configure GPIOs according to schematics. BUG=b:287563817 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: If852c7a30edb9fb778872414cb15dc3446aebc55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75872 Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-29soc/intel/meteorlake: Add QS(C0) stepping CPU IDMusse Abdullahi
This patch adds CPU ID for C0 stepping (aka QS). DOC=#723567 TEST=Able to boot on C0 rvp (and rex) and get correct CPU Name in coreboot log. Change-Id: I53e3b197f2a0090e178877c1eef783b41670ca83 Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76135 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede/var/dibbi: Update power limitsChia-Ling Hou
Add ramstage.c in Makefile.inc and update Dibbi power limits in Dibbi ramstage.c. BUG=b:281479111 TEST=emerge-dedede coreboot and check psys and PLx value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ieaff856b762b546f3e99acb7ba2ce15791193da6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75681 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede: Support variant specific power limitsChia-Ling Hou
With newer dedede design, it's required to config corresponding psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of adapter. BUG=b:281479111 TEST=emerge-dedede coreboot and check correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I583c930379233322c41027805369f81d02000ee7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-06-28intelblocks/pep: Send All Monitor Off/On command only in FWCM caseUsha P
ALL_MONITOR_OFF command is sent using DPOF. TBT controller needs to be notified about ALL_MONITOR_OFF(TBT Displays OFF) only when Firmware Connection Manager(FWCM) is in use during S0ix Entry/Exit. When configured for SWCM this command should not be sent. BUG=b:288536417 TEST= Build and boot Rex Proto-1. Verify S0ix working. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I110fb971846f110e7d93a524ceda3bf4bfc15c13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75717 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Utkarsh H Patel <utkarsh.h.patel@intel.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-28mb/google/skyrim/var/winterhold: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: Ib12c73f95030625b52e26f86e932ee2aaa6ea522 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-06-28mb/google/skyrim/: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: I1f3e305c48801b4e499de56d06c0dcd3eeacc626 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76091 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-06-28nb/intel/pineview: Drop unused attributes from sysinfo structElyes Haouas
Change-Id: Iab582458a7dd87e10bf14fd34f15c592b600f706 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-28mb/google/rex/var/ovis: Enable crashlog and IOE dieJakub Czapiga
BUG=b:262501347 TEST=Boot on Ovis board. Change-Id: I43aac857e3ec7989c9ab5201cd8f24a7c877e76b Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex: Avoid boot hang due to missing SOC/IOE SRAM deviceSubrata Banik
The SOC/IOE SRAM device is used to store crash logs. Previously, the crashlog enablement was hardcoded in the baseboard.common module. This commit moves the crashlog enablement logic to the baseboard module, so that it can be enabled or disabled based on the specific baseboard. Additionally, the SOC/IOE SRAM is now enabled by default in the baseboard devicetree.cb file. This prevents the system from hanging if the SOC/IOE SRAM device is not present. BUG=b:262501347 TEST=Able to build and boot google/screebo with this patch. w/o this patch: [ERROR]  SOC SRAM device not found! [ERROR]  IOE SRAM base not valid Change-Id: I02d581e5b62cfa114a3761a9704ad9f24dead8aa Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex/var/ovis: Enable SaGvSubrata Banik
This patch enables SaGv with fixed frequency and gears for Ovis. Restrict memory speed to 6400 MTS as per board design. BUG=b:282164577 TEST=Verified the settings on google/ovis using debug FSP logs Change-Id: Ia9703344a8ae9d2ba44a16c62afab820fd8e2177 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76138 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28mb/emulation: Enhance ROM_SIZEMaximilian Brune
Some payloads tend to need bigger space than what our current defaults allow. Linuxboot is a good example. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I7029ca3360d936b67ff9873fa13cf9cc60445e56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-28mb/google/rex: Set TCC to 90°CSumeet Pawnikar
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit (TCC) activation feature for rex variants. BUG=b:270664854 BRANCH=None TEST=Build FW and test on rex board Change-Id: I0567b6240fcb53f38158c381b700169475cf3795 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76110 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-28mb/google/dedede/var/pirika: Add new Codec ALC5650Daniel_Peng
1.Add Codec ALC5650 setings for drivers/i2c/generic 2.Add option value '3' to AUDIO_CODEC_SOURCE for SSFC BUG=b:284060672 BRANCH=master TEST=emerge-dedede coreboot chromeos-ec chromeos-bootimage Confirm the device is existed on system. Change-Id: I39703a950620c90aa3740b7313b7d32cc68eede4 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75918 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2023-06-28mb/google/hades: Update SD controller from GL9750 to GL9755Eric Lai
Hades uses GL9755 not GL9750. Select the right driver for ASPM. BUG=b:283721798 TEST=check the coreboot log. GL9755: configure ASPM and LTR Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia5b3b17d76f02d5114af24535f9a1eecc14358a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76118 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28payloads/Memtest86Plus: Update branch name from master to mainNicholas Chin
It seems like the default branch for coreboot's Memtest86+ fork was renamed from 'master' to 'main'. TEST: Memtest builds correctly when selecting 'Main' for the Memtest86+ version option. Change-Id: I269249518019f5d0d12c57f1c14012abca86b48b Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76100 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28payloads/filo: Update branch name from master to mainNicholas Chin
It seems like the default branch for FILO was renamed from 'master' to 'main'. TEST: FILO builds correctly when selecting 'HEAD' for the FILO version option. Change-Id: I6c355d757987551e850f9d24f6bfb14167cb8046 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76101 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-28soc/amd/common/block/acpi/ivrs: fix missing IOAPIC[1] errorFelix Held
When probing the resource with the IOMMU_IOAPIC_IDX index, we need to use the PCI device 0 function 0 on the first bus in the domain for probing and not the domain device, since the resource isn't on the domain device, but on the northbridge device which is B0F0D0 in the case of the APUs. TEST=This fixes the following error on Mandolin with Picasso: AMD-Vi: [Firmware Bug]: : IOAPIC[1] not in IVRS table AMD-Vi: Disabling interrupt remapping Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id88f17d68ba5accef6561837478828bd3d24baa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76117 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-28acpi: Add SPCR tableArthur Heymans
TESTED works on IO and MMIO console with linux using 'earlycon=' in the commandline argument. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I64e624c17a27b9215a8ba83bd6cbb2c0a7aa1dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/75685 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28mb/bytedance: Add 2 SPR sockets server board bd_egsYiwei Tang
Bytedance bd_egs is a dual socket MB with Intel Sapphire Rapids Scalable Processor chipset. It's utilising: - 2 SPR sockets - Max 32 DIMMs - 33x CPU PCIe slots - AST2600 for VGA and BMC remote management Test: The board boots to Linux 5.10 with all 192 cores available. All PCIe devices and DIMMS are working. # sudo dmesg --level alert,crit,err,warn [ 46.636896] netlink: 'consul': attribute type 1 has an invalid length. Change-Id: I091bc78e39cd76b3c6b9a10a1fcf58e9d671ef5d Co-authored-by: Jinfeng Li <lijinfeng01@ieisystem.com> Co-authored-by: Long Cao <caolong01@inspur.com> Co-authored-by: Hao Wang <wanghao11@inspur.com> Co-authored-by: Chenyu Lan <lanchenyu@inspur.com> Co-authored-by: Lay Kong <lay.kong@intel.com> Co-authored-by: Kehong Chen <kehong.chen@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Dong Wei <weidong.wd@bytedance.com> Co-authored-by: Chenchen Li <lichenchen.carl@bytedance.com> Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com> Reviewed-by: Haitao Nie <niehaitao@bytedance.com> Reviewed-by: Shijian Ge <geshijian@bytedance.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-27mb/google/hades: select DUMP_SMBIOS_TYPE17Eric Lai
Hades uses DDR5 which can't read SPD from coreboot yet. Use smbios dump to print memory information. TEST=check the coreboot log. memory Channel-0-DIMM-0 type is DDR5 memory part number is MTC8C1084S1SC56BG1 memory max speed is 5600 MT/s memory speed is 5200 MT/s memory size is 16384 MiB Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ica44081228a3a1edc36e2110e84686582fbe8f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-06-27arch/x86/Kconfig: remove period from DUMP_SMBIOS_TYPE17 titleEric Lai
Option name strings should not end with a period, remove it. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Id61d8961cad2cd311db7d9da3bdb86f0f28b57b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-27util/docker/coreboot-sdk: Install GNAT meta package instead gnat-12Felix Singer
The versions of both GCC and GNAT need to be in sync and the meta package for GCC is already used. So use the meta package for GNAT as well. Change-Id: Ifcd6960731bc02c70a510e520b385ca300caf88f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-27soc/amd/block/ivrs: Add NULL check for IVRSNaresh Solanki
Add NULL check for ivrs pointer before use. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: Ibeb0ea3bcaa3512a93500588ad4f11046edee61f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-06-26soc/amd/common/iommu.c: Make sure iommu is enabledArthur Heymans
Don't rely on vendorcode to set enable bit on IOMMU. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: I1805a20656b7fb3915f8cc93c618ee074461840f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-06-26util/docker/coreboot-sdk: Drop subversion packageFelix Singer
Subversion is not used anywhere (anymore?). Thus, drop it from the package list. Change-Id: Ibf8073c7878c130ff688102e850bbdcd66e3becc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-26mainboard/google/rex: Enable crashlogPratikkumar Prajapati
Enable crashlog for rex. Select config options SOC_INTEL_CRASHLOG, and SOC_INTEL_IOE_DIE_SUPPORT. Also enable ioe_shared_sram and pmc_shared_sram devices. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: I3d3a9fb41d1293f021ad9de9b29c756cb7559373 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-26soc/intel/common: Print crashlog size info in hexPratikkumar Prajapati
Print crashlog size information in hex to be consistent with other prints. BUG=b:262501347 TEST=Values printed in hex. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ieb5498e702497bfbc2b4d5396d5b760a0010f5de Reviewed-on: https://review.coreboot.org/c/coreboot/+/75910 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/intel/meteorlake: Add support for crashlogPratikkumar Prajapati
Capture crashlog records from CPU PUNIT SRAM, SOC PMC SRAM and, IOE SRAM. Crashlog records for IOE SRAM is discovered by parsing SOC PMC SRAM records. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: Ib0abd697fba35edf1c03d2a3a325b7785b985cd5 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-26mb/google/brya/var/vell: update FW_config to sync config.starShon Wang
We have found inconsistencies in turn of FW_CONFIG settings/definitions, so sync setting to vell config.star BUG=b:282189358 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I676b719ecc711a6f59e76465a3566bf63924d90f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75913 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26mb/google/rex: Avoid LPDDR5/x hangSubrata Banik
This patch avoids random hang issue observed after booted to OS on LPDD5/x platforms due to CLK not tuned properly in SAGV point 0, 2133MT/s. As per Intel doc 769410 the expected work around is to change SAGV point 0 from 2133 G4 to 3200 G4. BUG=b:287170545 TEST=Able to perform 500 power cycles on google/rex without any hang. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I02a9cadc075f396549703d7a008382e76268f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76076 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26mb/qemu-aarch64: Move probing dram to read_resourcesArthur Heymans
While we are at it: - Don't use _kb version of declaring resources - Use cbmem_top instead of probing for memory again Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Iaaee41aec7806287ef1881372ec8ec47a4cd57d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-06-26acpi/acpigen.c: Be explicit about char signArthur Heymans
The sign of 'char' is not standardized and with GCC is architecture dependent. This fixes warnings when compiling this file on arm64. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I53b99835b2ffec5d752fc531fd59e4715f61aced Reviewed-on: https://review.coreboot.org/c/coreboot/+/76006 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_[range,entry]Felix Held
Zero-initialize the ivhd_range and ivhd_entry structs to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iccacc89bfc497449ad0716a3436949505b65f748 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76079 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/amd/common/block/acpi/ivrs: use size of instance instead of typeFelix Held
To determine the length parameter of memset, use sizeof with the instance as argument instead of the type. The behavior is the same, but it clarifies parameters in the memset call a bit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I63674fbed7097a583cd77fa6e700652d6dcc5565 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-26soc/amd/common/block/acpi/ivrs: use memset on ivhd_[11,40]Felix Held
Assign the current address casted to acpi_ivrs_ivhd[11,40]_t pointer to *ivhd_[11,40] at the beginning of acpi_fill_ivrs[11,40] and then use memset on *ivhd_[11,40] to zero-initialize the structs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I70b12fee99d6c71318189ac35e615589a4c8c629 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76077 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26lib/smbios: Add a config string for BIOS Vendor in SMBIOS Type 0Hao Wang
BIOS Vendor in SMBIOS Type 0 would be who built the firmware so create a config string with default "coreboot" to make it changeable. Vendors could update it by adding a Kconfig in the site-local directory. Change-Id: I6dfcca338ffc48b150c966b9aefcefe928704d24 Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75737 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-26soc/mediatek: Enable DRAM scramble on fast calibration flowXi Chen
No matter what DRAM calibration is performed, DRAM scramble should be enabled as long as MEDIATEK_DRAM_SCRAMBLE is set to y. Currently, DRAM scramble is enabled only if full calibration is performed. Correct the behavior by adding DRAMC_CONFIG_SCRAMBLE to the header config in fast calibration flow. BUG=b:285474337 TEST=Check the scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I907bccd4e68e040179e1971db6bf7a57b88dec1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75818 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-25commonlib/post_codes.h: Fix POST_EXIT_PCI_SCAN_BUS descriptionlilacious
Description of POST_EXIT_PCI_SCAN_BUS indicates the opposite of what its name suggests. Secondly, POST_ENTER_PCI_SCAN_BUS and POST_EXIT_PCI_SCAN_BUS have identical comments, which appears to be a copy-paste issue. Change the description accordingly. Change-Id: Ifc920651255bacf033cac39f0208d817f9ee84fc Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76047 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-24util/crossgcc: Update LLVM from version 16.0.5 to 16.0.6Felix Singer
Change-Id: I68f776c676b1c3c5562e9209c68c7a840198e36f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-24soc/intel/cannonlake/chip.h: Use boolean type where applicablelilacious
Change-Id: If9639bd1d0737f94931c28b0e12f214a5c1f87c0 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75959 Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-24soc/intel/skylake/chip.h: Use boolean type where applicableFelix Singer
Change-Id: Ic40917689092e8d897a3ba92ac767cdb3b595eb3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75880 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_hpet structFelix Held
Zero-initialize the ivhd_hpet struct right at the beginning of the ivhd_describe_hpet function to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4d3563c485eed4a7cb0526a62f7b6c80f763bfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/76074 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-06-23soc/amd/common/acpi/ivrs: add HID argument to ivhd_describe_f0_deviceFelix Held
Allow the caller to specify the HID that gets written to the ivrs_ivhd_f0_entry_t struct. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I830f1fbbd535b100c88997ece10142a5d553950f Reviewed-on: https://review.coreboot.org/c/coreboot/+/76073 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-06-23soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_f0 structFelix Held
Zero-initialize the ivhd_f0 struct right at the beginning of the ivhd_describe_f0_device function to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6750b58dacb9b9192ed21128eb6e3a4495b96d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-06-23soc/amd/common/block/acpi/ivrs: conditionally generate eMMC entryFelix Held
The eMMC entry in the IVRS table should only be generated if an eMMC controller is present in the SoC. Where the PCI_DEVFN(0x13, 1) is from is currently unclear to me. There is no PCI device 0x13 on bus 0 and the eMMC controller is also an MMIO device and not a PCI device, but this is what the reference code does. My guess would be that it mainly needs to be a unique PCI device that won't collide with any existing PCI device in the SoC. Add a comment about this too. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I00865cb7caf82547e89eb5e77817e3d8ca5d35dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-23Makefile.inc: don't add fmap_config.h dependency twiceFelix Held
Commit d054bbd4f1ba ("Makefile.inc: fix multiple jobs build issue") added a dependency on $(obj)/fmap_config.h to all .c source files in all stages, so it's not needed any more to add it as a dependency to files that include fmap_config.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b62917f32ae9f51f079b243a606e5db07ca9099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76002 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-23soc/intel/jasperlake: Add per-SKU power limitsChia-Ling Hou
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree. BUG=b:281479111 TEST=emerge-dedede coreboot and read correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679 Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Super Ni <super.ni@intel.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-06-23mb/google/rex: Configure ISH GPIO's based on FW_CONFIGBernardo Perez Priego
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled, loaded, and functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I3f0f9a7c8318fa9ae59b6f613eafdacbfa07c749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23soc/intel/meteorlake: Rename shared SRAM aliasesPratikkumar Prajapati
Rename shared SRAM aliases for IOE and PMC to make them more readable. pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram. pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram. Rename them in SOC code as well as mainboard to make sure the patch builds for the relevant boards. BUG=b:262501347 TEST=Able to build. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I02a8cacc075f396549703d7a008382e76258f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23mb/google/rex: Keep CNVi PCI device enabled for OvisSubrata Banik
The CNVi PCI device is required for the system to boot properly. By ensuring that this device is enabled, we can prevent the below error message from appearing and ensure that the system boots successfully. BUG=b:274421383 TEST=Able to build and boot google/ovis without any error. w/o this patch: [ERROR] CNVi WiFi is enabled without CNVi being enabled [ERROR] CNVi BT is enabled without CNVi being enabled Change-Id: I4dbae14f0cfccf96a33437a0e2fdefb508209354 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-23soc/intel/common/block/cse: Retrieve CSE RW FW version conditionallySubrata Banik
This patch introduces a newer config to store the CSE RW FW version into the CBMEM. Prior to that CSE RW FW version was fetched unconditionally and ended up increasing the boot time by 7ms to 20ms depending on the SoC arch (including CSE arch). The way to retrieve the CSE firmware version is by sending the HECI command to read the CSE Boot Partition (BP) info. The cost of sending HECI command to read the CSE FW version is between 7ms-20ms (depending on the SoC architecture) hence,ensure this feature is platform specific and only enabled for the platformthat would like to store the CSE version into the CBMEM. TEST=Build and boot google/rex to avoid getting CSE RW FW version to save 18ms of the boot time. w/o this patch:   10:start of ramstage                            722,215 (43)   17:starting LZ4 decompress (ignore for x86)     741,415 (19,200) w/ this patch:   10:start of ramstage                            722,257 (43)   17:starting LZ4 decompress (ignore for x86)     723,777 (1,520) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I94f9f0f99706724c7d7e05668390f3deb603bd32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2023-06-23mb/msi/ms7d25/vboot-rwab.fmd: Add 32KiB HSPHY cache regionMichał Żygowski
Add the HSPHY region required by INCLUDE_HSPHY_IN_FMAP option. It is needed in case CSME/HECI is disabled or not visible to keep the PCIe 5.0 root ports functional. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic4793fc9457f58e914ef3e18cce1294f230462bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/68988 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23soc/intel/alderlake/hsphy: Add possibility to cache HSPHY in flashMichał Żygowski
The patch adds a possibility to cache the PCIe 5.0 HSPHY firmware in the SPI flash. New flashmap region is created for that purpose. The goal of caching is to reduce the dependency on CSME and the HECI IP LOAD command which may fail when the CSME is disabled, e.g. soft disabled by HECI command or HAP disabled. This change allows to keep PCIe 5.0 root ports functioning even if CSME/HECI is not functional. TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A and notice PCIe 5.0 port is functional after loading the HSPHY from cache. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5a37f5b06706ff30d92f60f1bf5dc900edbde96f Reviewed-on: https://review.coreboot.org/c/coreboot/+/68987 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23util/qemu: Add config for AArch64Nico Huber
Most arguments taken from the Kconfig help. RAM needs to be >= 531M, as coreboot is linked to reside between 512M..531M. Tested `make qemu` with QEMU 7.2.0. Change-Id: Id7f23918a786bc126188d5caf285e9f532dbb0ed Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-23allocator_v4: Fix top-level allocations w/o IORESOURCE_ABOVE_4GNico Huber
When moving the code to allocate at the top level in commit 9260ea60bfa4 (allocator_v4: Use memranges only for toplevel), a call to restrict the limit of the resource was dropped. Probably by accident in one of the earliest rebases. Without this call to effective_limit(), 64-bit resour- ces at the top level, i.e. PCI bus 0, were always placed above 4G. Even when this was not requested with the IORESOURCE_ABOVE_4G flag. Tested on kontron/ktqm77 where the issue could be reproduced with x86_64. Without the fix, boot hangs when trying to access the GMA MMIO registers of PCI 00:02.0, which were placed above 4G. Change-Id: Ied3a0695ef5e91f092bf2d442c1c482057643483 Signed-off-by: Nico Huber <nico.h@gmx.de> Found-by: 9elements QA Reviewed-on: https://review.coreboot.org/c/coreboot/+/76090 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23{commonlib/drivers}: Have option to store MRC version inside CBMEMSubrata Banik
This patch introduces CBMEM ID to store the MRC version (similar to existing implementation that stores the FSP-M version inside CBMEM ID) inside cbmem so the version information is available across the different coreboot stages. For example: * romstage: Use the CBMEM ID version information to check if the MRC cache is valid and need to erase the MRC cache * ramstage: Use the CBMEM ID to store the MRC cache into the non-volatile space. BUG=b:261689642 TEST=Able to build and boot google/rex and dump the MRC version as below. cbmem --list CBMEM table of contents: NAME ID START LENGTH ... 21. MRC VERSION 5f43524d 75ffeb60 00000004 ... localhost ~ # cbmem -r 5f43524d | hexdump 00000000 01 12 07 00 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I91f735239b33c6f8ba41c076048903e4b213c6a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75921 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23driver/intel/fsp2_0: Add support to store MRC cache using MRC versionSubrata Banik
This patch uses the "generic" variable name as "version" while storing the MRC cache data instead referring to the FSP-M version or MRC version. Hence, updated all the instances of `fsp_version/fspm_version` with `version`. Also introduces the new option to the MRC cache version that allows SoC users to store the MRC cache version based on the supported EDK2 version. Intel FSP built with EDK2 version 202302 onwards has support to retrieve the MRC version by directly parsing the binary. Additionally, added the helper function `fsp_mrc_version()` and corresponding header file to read the MRC version from the FSP binary. BUG=b:261689642 TEST=Able to build and boot google/rex and google/omnigul. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia8af53aed674ad4a3b426264706264df91d9c6b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75920 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-22arch/x86,lib: Migrate SMBIOS implementation to common codeBenjamin Doron
SMBIOS is not specific to architecture, and this is mostly a generic implementation. Therefore, move it to common code, having architecture-specific code define some functions to fill this data. Change-Id: I030c853f83f8427da4a4c661b82a6487938b24e6 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75886 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-22soc/amd/common/psp_verstage: move post codes to own headerlilacious
In order to clean up the post code macros, move them to a separate header away from unrelated code. The new header file is included in the file where the post codes are moved out of, so that the current state remains unchanged. Change-Id: I28a932ce071488e90000e1bbd30b4d739a4bae43 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-22mb/qemu/aarch64: Add PCI supportArthur Heymans
Run with "-device pci-bridge,chassis_nr=1" argument to add a bridge and see that it gets found and picked up by the resource allocator. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Iad5d87731066a4009d2c4930a01bc15543d9447a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75925 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 17:33:52 +0000