summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-01soc/amd/picasso: Add FSP support for including AGESAMarshall Dawson
AMD has rewritten AGESA (now at v9) for direct inclusion into UEFI build environments. Therefore, unlike the previous Arch2008 (a.k.a. v5), it can't be built without additional source, e.g. by combining with EDK II, and it has no entry points for easily building it into a legacy BIOS. AGESA in coreboot now relies on the FSP 2.0 framework published by Intel and uses the existing fsp2_0 driver. * Add fsp_memory_init() to romstage.c. Although Picasso comes out of reset with DRAM alive, this call is added to maximize compatibility and facilitate internal development. Future work may look at removing it. AGESA reports the memory map to coreboot via HOBs returned from fsp_memory_init(). * AGESA currently sets up MTRRs, as in most older generations. Take ownership back immediately before running ramstage. * Remove cbmem initialization, as the FSP driver handles this. * Add chipset_handle_reset() for compatibility. * Top of memory is determined by the FSP driver checking the HOBs passed from AGESA. Note that relying on the TOM register happens to be misleading when UMA is below 4GB. BUG=b:147042464 TEST=Boot trembyle to payload Change-Id: Iecb3a3f2599a8ccbc168b1d26a0271f51b71dcf0 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34423 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01src/soc/amd/picasso: Add methods to save and restore MTRRsRaul E Rangel
FSP AGESA overrides the MTRRs that coreboot set up. Until this is fixed we need to save and restore the MTRRs to undo what AGESA did. Once AGESA is fixed, we can delete these files. BUG=b:155426691, b:147042464 TEST=Boot trembyle and see MTRRs being modified Saving Variable MTRR 0: Base: 0x00000000 0xff000005, Mask: 0x0000ffff 0xff000800 Saving Variable MTRR 1: Base: 0x00000000 0x08070006, Mask: 0x0000ffff 0xffff0800 Saving Variable MTRR 2: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 3: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 4: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 5: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 6: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Variable MTRR 7: Base: 0x00000000 0x00000000, Mask: 0x00000000 0x00000000 Saving Fixed MTRR 0: 0x00000000 0x00000000 Saving Fixed MTRR 1: 0x00000000 0x00000000 Saving Fixed MTRR 2: 0x00000000 0x00000000 Saving Fixed MTRR 3: 0x00000000 0x00000000 Saving Fixed MTRR 4: 0x00000000 0x00000000 Saving Fixed MTRR 5: 0x00000000 0x00000000 Saving Fixed MTRR 6: 0x00000000 0x00000000 Saving Fixed MTRR 7: 0x00000000 0x00000000 Saving Fixed MTRR 8: 0x00000000 0x00000000 Saving Fixed MTRR 9: 0x00000000 0x00000000 Saving Fixed MTRR 10: 0x00000000 0x00000000 Saving Default Type MTRR: 0x00000000 0x00000800 Saving SYS_CFG: 0x00000000 0x00000800 ... MSR 0x200 was modified: 0x00000000 0x00000006 MSR 0x201 was modified: 0x0000ffff 0x80000800 MSR 0x202 was modified: 0x00000000 0x80000006 MSR 0x203 was modified: 0x0000ffff 0xc0000800 MSR 0x204 was modified: 0x00000000 0xc0000006 MSR 0x205 was modified: 0x0000ffff 0xf0000800 MSR 0x250 was modified: 0x06060606 0x06060606 MSR 0x258 was modified: 0x06060606 0x06060606 SYS_CFG was modified: 0x00000000 0x00740000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6048b25bd8a32904031ca23953f9726754b5a294 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40922 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/xeon_sp/cpx: Implement hide/unhide P2SB traditional danceAndrey Petrov
Perform the P2SB hide/unhide trick. This is needed so that BAR0 (0xfd000000) is not reclaimed by resource allocator, since it can not deal with a device that does not exist (hidden). Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I5db0ae4e31d72ba86efba5728b2afc68d3180d5d Reviewed-on: https://review.coreboot.org/c/coreboot/+/40921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-05-01soc/intel/xeon_sp/cpx: Enable common P2SBAndrey Petrov
Use common P2SB driver. This is needed to address a problem when enumerator does not see p2sb device (since it is hidden) but it is active and BAR is decoded. Change-Id: I9cb821a5684f15f1e1486872bf806a6ee3d0676f Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40920 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/xeon_sp: Add C620 p2sb.hAndrey Petrov
Add p2sb.h that is shared by all currently supported Xeon SP CPUs. Change-Id: Idcbff7ad587cb116897a953c079fb0a8b86cc2ed Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40919 Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/intel/cedarisland_crb: Enable P2SB deviceAndrey Petrov
Enable P2SB in static device tree so that hide/unhide trick works. Change-Id: I7dc20b001605b715155d333a07580e21a5f24136 Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/intel/cedarisland_crb: Populate 2-socket parameters for FSP-MAndrey Petrov
These parameters were found to work fine for 2-socket configuration, for FSP based on tag 16.D.21. Signed-off-by: Andrey Petrov <anpetrov@fb.com> Change-Id: I466a7f2951ef307036ddaed0be0aacf98dd2710f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40917 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01md/tiogapass: move all *.h to dir and make them globalMaxim Polyakov
It is necessary to rename the file gpio.h so that there are no conflict with another file (src/include/gpio.h) Change-Id: I4e3ef5882d6cb0ddbcb8357b54106ff2f47e4c51 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40733 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01xeon_sp, ocp/tiogapass: remove unused FSP-style GPIO defsMaxim Polyakov
Change-Id: I8599dca99c1f34e3937c5b77b3505815ce625b46 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39453 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01mb/ocp/tiogapass: fix advanced _PAD_CFG_STRUCT macros in configMaxim Polyakov
If the current pad configuration can not be defined using standard macros from the gpio_defs.h [1], then the intelp2m utility generates "advanced" _PAD_CFG_STRUCT() macros. However, often this configuration in the vendor’s firmware is erroneous. Change the extended macros to standard ones taking into account the information based on the schematic diagram and the previous GPIO configuration for FSP-M [2]. [1] src/soc/intel/common/block/include/intelblocks/gpio_defs.h [2] src/mainboard/ocp/tiogapass/skxsp_tp_gpio.h Change-Id: I56e45b1df77acbdd67e6325c3745a7ad137f8805 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01mb/ocp/tiogapass: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file tiogapass/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input (GPI). The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: I21e98721e58b00be9196927837daa2b5d2560822 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40731 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/tiogapass: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with AMI firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file tiogapass/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I818d040fa33f3e7b94b73c9bbbafca5df424616d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39427 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/ocp/sonorapass: Populate FSP-M parametersAndrey Petrov
Since CPX FSP headers are not released yet, populate certain settings with hard-coded offsets. Provided values are probably not correct and I do not understand what they mean and there is no documentation available yet. However they were found to work to a certain degree. TEST=tested on OCP Sonora Pass EVT Change-Id: I0f78cde69cb8a49a388a412b97bf8713e5b380ea Signed-off-by: Andrey Petrov <anpetrov@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40554 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/baytrail: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I9b15b5458bb8140fa9bb6b0ffb6b9c78e8d8a93b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01mb/ocp/sonorapass: Add Sonora PassRyback Hung
Just a minimal set of board files needed to get it to boot in 1 CPU mode. Signed-off-by: Ryback Hung <ryback.hung%quantatw.com@gtempaccount.com> Change-Id: Ia7b45c78b38d091bd9535899b681746e13efb4fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/40469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-05-01soc/intel/baytrail: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I353daf35c843521b089ff8411a9ba8c801605ff9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/braswell: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: Ie213b8c08e2d2b33a1dc1fda632163160d1cd70e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/cannonlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If7e2c84c39039e0dc6811f247390f856fc634b33 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/common: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I09cc69a20dc67c0f48b35bfd2afeaba9e2ee5064 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/intel/broadwell: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I0fd1a758d8838b3eea5640b41eee6a6893360aa3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01cpu/x86/mtrr/earlymtrr: Validate MTRR argumentsRaul E Rangel
The AMD64 Architecture Programmer's Manual, Volume 2: Systems Programming says the following about variable MTRRs: Variable Range Size and Alignment. The size and alignment of variable memory-ranges (MTRRs) and I/O ranges (IORRs) are restricted as follows: * The boundary on which a variable range is aligned must be equal to the range size. For example, a memory range of 16 Mbytes must be aligned on a 16-Mbyte boundary (i.e., naturally aligned). * The range size must be a power of 2 (2^n , 52 > n > 11), with a minimum allowable size of 4 Kbytes. For example, 4 Mbytes and 8 Mbytes are allowable memory range sizes, but 6 Mbytes is not allowable. Print out errors if these conditions are violated. I didn't assert since `set_var_mtrr` can be used in boot block before the serial console is enabled. BUG=b:147042464 TEST=Boot trembyle and see MTRR errors: MTRR Error: base 0xcc800000 must be aligned to size 0x1000000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8c734c7599bd89cf9f212ed43c2dd5b2c8ba7b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40762 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01documentation: Add documentation ideas for season of docsChristian Walter
Let's gather some documentation ideas for the season of docs. I reused the project ideas style (thanks Patrick). Feel free to add yourself as a mentor here. Also if you have more ideas, please add them to the document. Change-Id: I72221cbd53b99cdc946109753cf72af9c865a1e5 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40662 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01sb/intel/i82801gx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I11b8743234cb1292db8c930edecf8fb5c47d63fd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Fix crossystem wpsw_cur errorSubrata Banik
Add GPIO_PCH_WP (GPP_C11) to associate GPP_PCH_WP with community zero. TEST=Build coreboot, flash, boot to and log into kernel, execute "wp enable" in console, execute "crossystem" at kernel prompt and verify that "wpsw_cur" shows as being "1", Execute "wp disable" in console, execute "crossystem" at kernel prompt and verify "wpsw_cur" is 0. Change-Id: Ie4ae1365a7611b8be3e795798c171e3f7ea9e417 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40744 Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/amd/picasso: initialize i2c controllers in SoC flowAaron Durbin
BUG=b:153642124 TEST=Saw I2C communication Change-Id: I31f8b97d1ff7b687d7e078d5b594d1ad73c815e7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145457 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/amd/picasso/bootblock: Remove duplicate sb_reset_i2c_slavesRaul E Rangel
sb_reset_i2c_slaves is called in fch_pre_init. BUG=b:153675916 TEST=Builds on trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I157e473984257d633ceb3ef9df45c71a31c5c00b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso/bootblock/bootblock: Remove duplicate i2c initRaul E Rangel
fch_early_init already calls i2c_soc_early_init(). BUG=b:153675916 TEST=Boot trembyle and only see 1 i2c initialization message Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I689616fb617904df1781be3abe9d1dc580608173 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-01soc/amd/picasso: Allow mainboard to provide pci ddi descriptorsAaron Durbin
Mainboards must provide their DDI descriptors. BUG=b:153502861 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146443 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146439 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146438 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145453 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2145454 Change-Id: Ib3f115711e74d0e6eb5b063b3dccb36b265779af Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40875 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01ec/google/chromeec: Fix incorrect diag messageVictor Ding
The expected error code observed in clear_pending_events() should be EC_RES_UNAVAILABLE(9), not EC_RES_INVALID_COMMAND(1). BUG=b:153896701 Change-Id: I609490ceef675267760d34b5e9775211da93347c Signed-off-by: Victor Ding <victording@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40900 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/deltaur: Add BT reset gpioEric Lai
Harrison Peak (HrP) 9560 module needs a reset pin for BT power sequence. BUG=b:155248677 TEST=Boot into OS and check BT is functional. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I55ed1b095ba53c414c44088f4a6e7720b970e2f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40831 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-01soc/intel/{jsl,tgl}: Rename PcdDebugInterfaceFlags macros for better ↵Subrata Banik
understanding BIT 1 -> DEBUG_INTERFACE_UART_8250IO BIT 4 -> DEBUG_INTERFACE_LPSS_SERIAL_IO Change-Id: I566b9dc82b2289af42e58705ebeee51179886f1f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-05-01mb/google/deltaur: Update USB/WWAN configIvy Jian
Update USB3 ports configuration as schematics design. BUG=b:155026295 TEST=Boot into OS and check WWAN device detected by lsusb. Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Icb938e5a9c05fcc9772219b081a6f05334261baf Reviewed-on: https://review.coreboot.org/c/coreboot/+/40818 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01acpi_device: Make integer array input variable constDuncan Laurie
An array of 64bit integers is passed to acpi_dp_add_integer_array() but it is not const so can't take a const array without a compiler error. The function does not modify the array so it can be made const without breaking anything and allowing a const array to be passed in the future. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I98ecdaef5ddfa2026390e2812f5ea841ee51f073 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40882 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01arch/x86/acpi: Add define for generic container HIDDuncan Laurie
The generic container HID is defined in ACPI specification as PNP0A05. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I3632e77533a47f22b92259b469b03e63f51687e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01arch/x86/acpi_device: Allow empty child referencesDuncan Laurie
Currently if a child table is created and added to a property list without adding any properties to that child it will generate an empty package. For example: struct acpi_dp *dsd = acpi_dp_new_table("_DSD"); struct acpi_dp *prop = acpi_dp_new_table("PROP"); acpi_dp_add_child(dsd, "dsd-prop", prop); acpi_dp_write(dsd); Results in an empty PROP package: Name (_DSD, Package (2) { ToUUID("dbb8e3e6-5886-4ba6-8795-1319f52a966b") Package (1) { Package (2) { "dsd-prop", "PROP" } } } Name (PROP, Package (0) { } Empty packages don't seem to be explicitly forbidden, but they don't serve a purpose with device properties. Instead, if packages without any properties or children are skipped then this empty package is not written and the added child property can refer to another property that is already defined. This allows creating property references to existing tables, which can save duplication and namespace collision issues with nested properties. BUG=b:146482091 Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I9fee2ceb8a4496b90c7210533eee8c2b186cdfff Reviewed-on: https://review.coreboot.org/c/coreboot/+/40880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01soc/intel/jasperlake: fix args of dimm_info_fill() for dram_part_numMarco Chen
BUG=b:152019429 BRANCH=None TEST=1. provision dram_part_num field of CBI 2. modify mainboard - dedede to report DRAM part number from CBI 3. check DRAM part number is correct in SMBIOS for memory device Change-Id: I509d06a81bd005c5afe6e74a2da2ca408dee7b29 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mainboard/google/kahlee: move specific setting to variantKevin Chiu
Separate specific setting to variant from baseboard. baseboard/romstage.c in current release is only utilized by careena, we could remove it from the rest of variant build. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I658526e44aadc47bdc5538f506a1bfe2e5f20f63 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2020-05-01soc/intel/cannonlake/bootblock: Fix FSP CARPatrick Rudolph
Fix FSP CAR on platforms that have ROM_SIZE of 32MiB. CodeRegionSize must be smaller than or equal to 16MiB to not overlap with LAPIC or the CAR area at 0xfef00000. Tested on Intel CFL, the new code allows to boot using FSP-T. Change-Id: I4dfee230c3cc883fad0cb92977c8f5570e1a927c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01Doc/mb/51nb/x210: Do minor fixesEvgeny Zinoviev
Fix code blocks, add a newline, use inline code blocks for commands. Change-Id: Iecf04b00ed12323c124517f2557cc8b60640b618 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-01mb/google/octopus/variants/bobba: Disable XHCI LFPS power managementSheng-Liang Pan
LTE module is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: Ib8e5ae79e097debf0c75ead232ddbb2baced2a2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/40303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-05-01mb/google/volteer/malefor: Enable touch screenWilliam Wei
Enable Goodix touch screen and ensure it works properly. BUG=b:154191288 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the Goodix touch screen function. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I236ac56dd0a1817092151bae93e699115ba88e4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/40598 Reviewed-by: Alex Levin <levinale@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01vc/eltan/security/verified_boot/vboot_check.c: Increase wb_buffer sizeFrans Hendriks
Running commit aee0baf0690681fae85d24e6887d6cbb9209de83 on Facebook fbg1701 results in an error: VB2:vb2_rsa_verify_digest() ERROR - vboot2 work buffer too small! ERROR: HASH table verification failed! The actual vboot structures require more space. Workbuffer size needs to be increased. We didn't determine the commit causing the issue because this change fixes the issue. BUG=N/A TEST=Build and boot Facebook fbg1701 Change-Id: I5caebc643eb493f4285c2f2fc164ff3a5d35e24e Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-01tests: Add device/i2c-test test caseJan Dabros
Add unit test for src/device/i2c.c module. This patch is also used as an example for incorporating Cmocka mocking feature (-wrap linker flag). Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I2eeb565aacc724ae3b9f5c76ef4b98ef695416d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-01tests: Add lib/string-test test caseJan Dabros
Show a basic example of how unit testing can be applied for the coreboot project. Add a test harness for lib/string.c module. TEST=Install cmocka via appropriate command: sudo apt-get install -y libcmocka-dev sudo emerge dev-util/cmocka yum install libcmocka-devel * Build and run unit tests via `make unit-tests` * Check the output to see that tests passed. Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: Ibf5554d1e99a393721a66bdd35af0122c2e412c4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40538 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-05-01tests: Add build subsystem for unit testing corebootJan Dabros
Add a subsystem which will be used for writing, building and running unit tests for different coreboot's modules. This work is built using Cmocka unit testing framework. Description of what unit testing means (for the author) and how unit testing framework evaluation was performed may be found in Documentation/technotes/2020-03-unit-testing-coreboot.md Makefiles structure is very similar to this used for building coreboot images. Every directory has its own Makefile.inc were tests' names, sources, subdirs and multiple other test-related attributes are defined in form of variables. Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I9b0220b84b9a6e448476ca3eb3ccccc5fb829ad1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-01Documentation: Add proposal for firmware unit testingJan Dabros
Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I552d6c3373219978b8e5fd4304f993d920425431 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-01soc/amd/common/block/graphics/graphics: Add missing const to fill_ssdtRaul E Rangel
BUG=none TEST=Made sure trembyle builds Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9df70fd5c41a9a68edc7be3c2e920c4dc94d5af9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40871 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/purism/librem_skl: Use ACPI backlight controlsBenjamin Doron
Enables ACPI backlight controls. Change-Id: Iccf50f427b7555ee1a3ef9cc11a89d532789ac54 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2020-05-01soc/amd/picasso: Enable cache in bootblockFelix Held
Unlike prior AMD devices, picasso cannot rely on the cache-as-RAM setup code to properly enable MTRRs. Add that capability to the bootblock_c_entry() function. In addition, enable an MTRR to cache (WP) the flash boot device and another for WB of the non-XIP bootblock running in DRAM. BUG=b:147042464 TEST=Boot trembyle to payload and make sure bootblock isn't abnormally slow. Change-Id: I5615ff60ca196e622a939b46276a4a0940076ebe Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38691 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01security/vboot: Convert reboot-related errors to vboot2-styleYu-Ping Wu
Error codes are renamed as follows: VBERROR_SHUTDOWN_REQUESTED --> VB2_REQUEST_SHUTDOWN VBERROR_REBOOT_REQUIRED --> VB2_REQUEST_REBOOT VBERROR_EC_REBOOT_TO_SWITCH_RW --> VB2_REQUEST_REBOOT_EC_SWITCH_RW VBERROR_EC_REBOOT_TO_RO_REQUIRED --> VB2_REQUEST_REBOOT_EC_TO_RO BRANCH=none BUG=b:124141368, chromium:988410 TEST=emerge-nami coreboot Cq-Depend: chromium:2143030 Change-Id: Id82cf85f49dfb63a9c3d41aacd3969786bffcac7 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40749 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01Update vboot submodule to upstream masterYu-Ping Wu
Updating from commit id 55154620: vboot: Add screens for recovery using disk to commit id 3aab3014: vboot: Convert reboot-related errors to vboot2-style This brings in 3 new commits. Change-Id: I75be535e0b0f8080366b98e5ae2007452ad51738 Signed-off-by: Yu-Ping Wu <yupingso@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40845 Reviewed-by: Joel Kitching <kitching@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01soc/intel/tigerlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot tglrvp. Change-Id: Iad0ba94fea019623a5b98fff0cb4a2cd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-05-01mb/google/hatch/vr/puff: Add psys_pmax calculationTim Chen
This patch adds psys_pmax calculation. There are two types of power sources. One is barrel jack and the other is USB TYPE-C. The voltage level is fixed for a barrel jack while TYPE-C may vary depending on power ratings. We need to get voltage information from EC and calculate correct psys_pmax value. The psys_pmax needs to be set before FSP-S since FSP-S will handle the setting passing to pcode, so move the routine ahead to variant_ramstage_init. BUG=b:151972149 TEST=emerge-puff coreboot chromeos-bootimage check firmware log and ensure psys_pmax is passed to FSP check the data from dump_intel_rapl_consumption in the OS and ensure the power data is close to an external power meter. Change-Id: Iff767d4b44a01e766258345545438a54a16d1af5 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-05-01libpayload: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: I34facbe0cbbdc91066799b586d96abca1599c509 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40743 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01sb/common/smihandler: Fix 16-bit read/write to PCI_COMMAND registerElyes HAOUAS
Change-Id: Ib403f5a231f86bdc60b956e72a4ae631aa6a3899 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40742 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-05-01mb/google/dedede: Enable USB port for camera supportIan Feng
Support USB Chicony user facing camera. BUG=b:155109736 BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using user facing camera. Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I7580a58086977e239dca49c1def4f03583831662 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/i82801jx: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: If39cdfb21fec307141593f2482e014e146d4f1f2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/i82801ix: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I5a07a00e1183ef834d97c11268935617cfe17faa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/lynxpoint: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I81b740e0cfcf0e1bf096427b45ffba06d357fee6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01sb/intel/ibexpeak: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I212ef304a03d068232f50a71c318e2b468336339 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01util/intelmetool: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I3a00db217ce7acd11f979e64bb5d417a8bfc8717 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-01soc/amd/stoneyridge: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I7b39e895501c3bc672a9dffec06b7969dc2f911f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-05-01mb/intel/jasperlake_rvp: Select PcieRpClkReqDetect in device treeMeera Ravindranath
This CL selects the PcieRpClkReqDetect for the required root ports which is needed to allow proper clksrc gpio configuration. Also, sets the unused PcieClkSrcUsage to 0xFF. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Ie4ae1365a7621b8be3b795798c171e3f7ea9e487 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40758 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-01soc/intel/jasperlake: Fill PcieRpClkReqDetect from devicetreeMeera Ravindranath
This CL adds support to fill PcieRpClkReqDetect UPD from devicetree. Filling this UPD will allow FSP to enable proper clksrc gpio configuration. BUG=None BRANCH=None TEST=Build and boot jslrvp with NVMe Change-Id: Iad0b394fea019223a5b98fff0cb4a2bd1d2a7bd7 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40757 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-01src: Remove not used 'include <smbios.h>'Elyes HAOUAS
Change-Id: I12345a5b6c9ce94ca9f8b555154b2278a8ff97bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01include/device/device.h: Include <smbios.h>Elyes HAOUAS
smbios_slot_{type,data_width,length,designation} used for smbios_type_9 needs "smbios.h" Also use already defined 'smbios_type11' in "smbios.h". This will also include <smbios.h> in "static.c" file, this we can remove indirect includes of <smbios.h> in "chip.h" Change-Id: Id412a504da2fd75648636febd150356569e07935 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40310 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: Remove pad termination for RAM_STRAP_4Karthikeyan Ramasubramanian
The stuffed resistor straps are weaker compared to the internal pull-up. This can cause the GPIO to read '1' always. Remove the internal pull-up. Also read the GPIO only on the boards where the board version is populated. BUG=b:154301008 TEST=Build and boot the mainboard. Change-Id: Ib640211b9f50dfb0174a570eda1625bacbebb855 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-01Helios: Update DPTF settings for smooth fan speed controlSumeet R Pawnikar
Update DPTF settings for smooth fan speed control. BRANCH=firmware-hatch-12672.B BUG=b:154074920 TEST=Built and test on Helios system Change-Id: I3f4d9fd9e17541dd5fb7982a8b43a039c41cba87 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/google/dedede: Enable camera support for waddledooPandya, Varshit B
BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: I51dcf96a82535fc1e0b9247fd52af919885575e5 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/dedede: Add ACPI support for cameraPandya, Varshit B
1. Add support as per the schematics 2. Add 2 Ports and 2 Endpoints 3. Add support for OTVI8856 and OTVI5676 4. Add ON and OFF logic as Power Rails are same for both sensor BUG=None BRANCH=None TEST=Build and Boot waddledoo board and able to capture image using world facing camera. Change-Id: Ic8687bce4896d9fc17b2190b8d11618af3515cc1 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01sb/intel/common/{madt,rcba_pirq}.c: Convert to 96 characters line lengthElyes HAOUAS
Change-Id: I62a213013d9008d8a4a22b5908b7fc7d1b663c4b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-01lp/drivers/usb: Add quirk for QEMU XHCI root hubDuncan Laurie
The QEMU XHCI driver does not implement the Port Change Detect bit in the USBSTS register. As a result no devices are attached without looking at each port individually. Detect this as a quirk based on the QEMU XHCI controller PCI ID, and apply it to the root hub quirk list so it can get used by the generic hub driver to skip this check. With this change an attached USB mass storage device is detected and able to boot when supplied to qemu: -drive if=none,id=usbmsc,format=raw,file=/tmp/disk.img -device qemu-xhci,id-xhci -device usb-storage,bus=xhci.0,drive=usbmsc Change-Id: I6689cb1dbb24c93d45f5c5ef040b713925d07588 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39839 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01src: Remove unused 'include <cpu/x86/cache.h>'Elyes HAOUAS
Change-Id: I2bf1eb87bb5476dd77b5a56dfe8846e82d414523 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-01mb/google/dedede: add new variant for wheeliePeichao Wang
Add initial support for wheelie variant board. BUG=b:154664137 BRANCH=None TEST=build Change-Id: Id638e987f45c247dae824f221a38ccf32626572f Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-01mb/google/nightfury: Tune the usb2_port[0] strengthSeunghwan Kim
Update usb2 port strength parameter for usb2_port[0] to improve SI. BUG=b:154668734 BRANCH=firmware-hatch-12672.B TEST=Built and checked SI margin of USB2 ports Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Change-Id: I8b4b58a67dc0835a677770a2968e8d8d61e0374f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01soc/intel/jasperlake: Add support to generate ACPI GPIO operationsKarthikeyan Ramasubramanian
Add support to generate ACPI operations to get/set/clear RX/TX GPIOs. BUG=b:152936541 TEST=Build and boot the mainboard. Ensure that there are no errors in the coreboot logs regarding unsupported ACPI GPIO operations. Change-Id: Ibc4846fbd9baf4f22c48c82acefed960669ed7d4 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-01mb/ocp/tiogapass: Update UPD IIO bifurcation at run-timeJohnny Lin
Update UPD IIO bifurcation at run-time according to different Riser cards. For detail please reference Facebook Server Intel Motherboard v4.0, Sec. 10.1.2 Riser card types. With the engineering build FSP, it can only configure IIO for one socket so my local test needs to remove all socket1 elements from tp_iio_bifur_table. This change relies on [1] and need to add GPP_C15 and GPP_C16 to early_gpio_table for gpio configuration in bootblock. [1] https://review.coreboot.org/c/coreboot/+/39427/ Tested=OCP Tioga Pass can see socket0 IIO being updated with an engineering build FSP. Change-Id: I8e63a233a2235cd45b14b20542e6efab3de17899 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-04-30mb/cedarisland_crb: rework GPIOs configuration using macrosMaxim Polyakov
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 registers values from the inteltool dump, is more understandable and makes the code much cleaner. The gpio.h file with PAD_CFG macros was automatically generated using the util/intelp2m [1] utility: ./intelp2m -p lbg -file cedarisland/vendorbios/inteltool_gpio.log According to the documentation [2], the Host Software Pad Ownership register only affects the pads that are configured as input. The intelp2m utility takes this into account when converting macros and ignores bits from this register for the corresponding pads. [1] https://review.coreboot.org/c/coreboot/+/35643 [2] Intel Document Number: 549921 Change-Id: Id671a9021a8313d8c3359b89c2934b929bcab1a4 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40736 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/cedarisland_crb: exclude GPIOs reconfiguration by FSP-MMaxim Polyakov
We should be sure that after romstage the pads will be configured according to the config from gpio.h only. This patch sets the GPIO configuration from gpio.h using the soc/intel/common/gpio.c driver again in ramstage. [1] https://review.coreboot.org/c/coreboot/+/40730 Change-Id: Ic49e504d96fe4fd44434e7b981f8d8d9e76880ef Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30mb/intel/cedarisland_crb: use common driver to configure GPIOMaxim Polyakov
According to changes in the soc/xeon_sp code [1,2], server motherboards with Lewisburg PCH can use the soc/intel/common/gpio driver to configure GPIO controller. This patch adds pads configuration map, which has the format required by the GPIO driver. The data for this was taken from the inteltool register dump with vendors firmware. The gpio.h file with pad configuration was generated automatically using the util/intelp2m [3]: ./intelp2m -raw -p lbg -file cedarisland/vendorbios/inteltool_gpio.log [1] https: //review.coreboot.org/c/coreboot/+/39425 [2] https: //review.coreboot.org/c/coreboot/+/39428 [3] https: //review.coreboot.org/c/coreboot/+/35643 Change-Id: I90b91e6dbf8c65c747d0e0d94c61023e610f93ab Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
2020-04-30payloads/tianocore: Fix check for custom bootsplashMatt DeVillier
-n needs to check against a string, but if CONFIG_TIANOCORE_BOOTSPLASH_FILE is unset, then $(CONFIG_TIANOCORE_BOOTSPLASH_FILE) evaluates to nothing and the check fails, leading the Makefile to try and copy a non- existant file/path. Change-Id: Iff717dd48748cff16f485bafaa91c7a225fb5bdb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-04-30mb/amd/padmelon: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Ibfb7efa22c525e60399afc198af6632330faaac3 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2020-04-30mb/pcengines/apu1: Remove PS/2 keyboard driver configurationPaul Menzel
Since commit 6aa8c5bc (drivers/pc80: Do not initialize PS2 keyboard by default), the Kconfig option `DRIVERS_PS2_KEYBOARD` already defaults to `n`. So, remove it here, as this option should be user selectable anyway depending on the payload. Change-Id: I3d08fb6bbb3e9d53fd2fed96f26679e8b1e73f8c Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-30mb/purism/librem_bdw: Remove PS/2 keyboard driver selectionPaul Menzel
Most payloads, like GRUB, SeaBIOS and Linux, are able to initialize the PS/2 keyboard themselves, so coreboot does not need to initialize it. Therefore, this option should not be hard-coded for the mainboard, and be left for the user to select. Change-Id: Iac835d2e7a3232f8e5c76f10984ae3f172f9c0ca Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-30soc/amd/picasso: Add support for em100Furquan Shaikh
This change enables support for em100 for Picasso platform. Since em100 requires lower SPI speed, this change configures speed in all modes as 16MHz. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that em100 works fine on trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib5ea1fe094fda9b8dba63e94b37e61791629564f Reviewed-on: https://review.coreboot.org/c/coreboot/+/40825 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Allow mainboard to configure SPI settingsFurquan Shaikh
This change adds options to allow mainboard to configure SPI speed for different modes as well as the SPI read mode. BUG=b:153675510,b:147758054 BRANCH=trembyle-bringup TEST=Verified that SPI settings are configured correctly for trembyle. Change-Id: I24c27ec39101c7c07bedc27056f690cf2cc54951 Signed-off-by: Furquan Shaikh <furquan@google.com> Signed-off-by: Rob Barnes <robbarnes@google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40421 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Move SPI init calls into sb_spi_init()Furquan Shaikh
This change adds a helper sb_spi_init() that makes all the required calls for configuring SPI to ROM. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic5b395a8d3bdab449c24b05d1b6b8777e128b5e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40824 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Introduce enums for SPI read mode and speedFurquan Shaikh
This change adds enums for spi_read_mode and spi100_speed in preparation for adding these to chip.h in follow-up CLs. This makes it easier to reference what the mainboard is expected to set for these SPI configs. BUG=b:147758054,b:153675510 BRANCH=trembyle-bringup TEST=Verified that SPI configuration is correct for trembyle. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7f9778b41bd059a50f20993415ebd8702a1ad58e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40823 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/picasso: Get rid of chip.h inclusion from southbridge.hFurquan Shaikh
southbridge.h does not really need chip.h. So, this change removes the inclusion of chip.h from it. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I09c87b975ecd5f7798da8dd858be0c729aef42de Reviewed-on: https://review.coreboot.org/c/coreboot/+/40822 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30soc/amd/common/block/smbus: Include acpimmio_map.h in sm.cFurquan Shaikh
sm.c requires acpimmio_map.h for ACPIMMIO_* macros. This change includes acpimmio_map.h in sm.c Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ia049254fa389a76bcf6538c0449229b4d856086e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40821 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30Revert "soc/mediatek/mt8183: Force retraining memory if requested"Julius Werner
This reverts commit 285975dbba8c7f3bbb9f9950e79a30bb983d5123. Reason for revert: VB2_RECOVERY_TRAIN_AND_REBOOT was never meant to have any special effect on memory training behavior. It was just supposed to be a "reboot automatically after reaching kernel verification" recovery reason. On x86 devices this was used to prime the separate recovery MRC cache in the factory (make sure it is initialized before shipping). This isn't used on Kukui anyway, but in order to make sure nobody copies this code and keep the behavior consistent between platforms, let's remove it. Change-Id: I5df5e00526e90cb573131de3c8bac9f85f4e3a5f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40623 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/ocp/tiogapass: Implement port 80h direct to GPIO and init UART pinsBryantOu
Enable aspeed's function that port 80h direct to GPIO for LED display, refer to section 9.4 Port 80h Direct to GPIO Guide of aspeed's Application Design Guide, also configure GPIO to UART for output serial console messages. Tested=Check if port 80h LED debug card can display POST codes at early stage, and serial console can see the related messages. Change-Id: I087d5a81b881533b4550c193e4e9720a134fb8e7 Signed-off-by: BryantOu <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40481 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30mb/google/voteer: Enable DevSlp for SATA port1Wonkyu Kim
BUG=b:152893285 BRANCH=none TEST=Build and boot to OS volteer with Intel SATA and reboot from OS console Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibed8f8c445bf2ac2290ffb670d8dfb83fc960438 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30mb/google/volteer: Create trondo variantDavid Wu
Create the trondo variant of the volteer reference board by copying the template files to a new directory named for the variant. BUG=b:154678884 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TRONDO Change-Id: Ie4f9bfe4798e14f91c6cb439f5c5ab2b9ea52b51 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40686 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-30payloads/ipxe: Enable HTTPS supportFelix Singer
Change-Id: Ia25d4ce9260fa8c00fdea0e19f5e927559371af0 Signed-off-by: Felix Singer <migy@darmstadt.ccc.de> Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-04-30mb/google/puff: update USB2 strengthTim Chen
Based on USB SI report to fine tune the strength for USB2 port0. BRANCH=none BUG=b:153590143 TEST=build and test USB2 port0 function works fine. Change-Id: I070c9e1c8153a680fb8f827889738a764d7ea9f4 Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40482 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-30libpayload: xhci: Do not memcpy registersJulius Werner
memcpy() is meant to be used on normal memory and often implemented with architecture-specific optimizations to make that as performant as possible. MMIO registers often have special access restrictions that may be incompatible with whatever memcpy() does. For example, on arm64 it uses the LDP (load pair) to load 16 bytes at a time, which makes 4-byte MMIO registers unhappy. This patch removes the caching of the XHCI capreg registers and changes it back to a pointer. The CAP_GET() macro is still accessing a full (non-bitfield) uint32_t at the end so this should still generate a 4-byte access (which was the goal of the original change in CB:39838). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id058c8813087a8e8cb85f570399e07fb8a597108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-04-30sc7180: Increase SPI flash frequency to 37.5MHzJulius Werner
It seems that all SC7180 boards we have can well handle 37.5MHz of SPI flash speed, so bump that up from the current 25MHz so that we don't leave boot speed on the table. (The next step would be 50MHz which currently doesn't work on all boards so we're not going there yet.) BUG=b:117440651 Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Id6e98fcbc89f5f3bfa408c7e8bbc90b4c92ceeea Reviewed-on: https://review.coreboot.org/c/coreboot/+/40874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-04-29soc/intel/tigerlake: Check SPD is not NULL before printEric Lai
Check SPD is not NULL before print. This can prevent the system from hanging up. BUG=b:154445630 TEST=Check NULL SPD is not print. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Iccd9fce99eda7ae2b8fb1b4f3c2e635c2a428f04 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40560 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-29nb/intel/haswell/pei_data.h: Add ULT system typeAngel Pons
Looks like 5 is a valid system type, as Google Beltino and Slippy are using it. According to comments on these mainboards' code, this value corresponds to ULT systems. So, add it to the comment on the pei_data struct, which was likely copied from Sandy Bridge and was not updated. Change-Id: I3654bb6022839dba3e1499cf43e8beaa97d1def1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>