Age | Commit message (Collapse) | Author |
|
Having L1.2 enabled on the SD port increases the kernel resume times by
between 30 & 40ms. This patch disables L1.2 on SD to get that time
back.
As with needing to have hotplug enabled on the SD card, this seems like
a driver issue, so hopefully that will get sorted out and this patch
can be reverted.
BUG=b:274025743
TEST=resume times are decreased.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2c409fa2cd66c712c5ba7104635499d63fa0d2be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74118
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post
right after PCI enumeration and handle the command response at
`BS_PAYLOAD_BOOT'.
With these settings we have observed a boot time reduction of about 20
to 30 ms on brya0.
BUG=b:268546941
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post after PCI initialization and EOP message received at
`BS_PAYLOAD_BOOT'.
Change-Id: I81e9dc66f952c14cb14f513955d3fe853396b21c
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73922
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot supports three instances of sending EOP:
1. At CSE `.final' device operation
2. Early as with Alder Lake in chip_operations.init if
`SOC_INTEL_CSE_SEND_EOP_EARLY' is selected
3. At BS_PAYLOAD_BOOT as designed for Meteor Lake if
`SOC_INTEL_CSE_SEND_EOP_LATE' is selected
Currently, Alder Lake uses #3 as it results in better and more stable
boot time. However, what would deliver even better result is to not
actively wait for CSE completion.
This patch introduces a new `SOC_INTEL_CSE_SEND_EOP_ASYNC' Kconfig
which split the action of sending EOP request and receiving EOP
completion response from the CSE.
This patch used in conjunction with #1 can significantly
improves the overall boot time on a Raptor Lake design. For example
`SOC_INTEL_CSE_SEND_EOP_ASYNC' on a skolas board can deliver up to 36
ms boot time improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 1 | 1020.052 | 971.272 |
| 2 | 1015.911 | 971.821 |
| 3 | 1038.415 | 1021.841 |
| 4 | 1020.657 | 993.751 |
| 5 | 1065.128 | 1020.951 |
| 6 | 1037.859 | 1023.326 |
| 7 | 1042.010 | 984.412 |
|----------+----------+-----------|
| Mean | 1034.29 | 998.20 |
| Variance | 4.76 % | 5.21 % |
The improvement is not stable but comparing coreboot and FSP
performance timestamps demonstrate that the slowness is caused by a
lower memory frequency (SaGv point) at early boot which is not an
issue addressed by this patch.
We also observe some improvement on an Alder Lake design. For example,
the same configuration on a kano board can deliver up to 10 ms boot time
improvement as illustrated below.
| # | Late EOP | Async EOP |
|----------+----------+-----------|
| 0 | 1067.719 | 1050.106 |
| 1 | 1058.263 | 1056.836 |
| 2 | 1064.091 | 1056.709 |
| 3 | 1068.614 | 1055.042 |
| 4 | 1065.749 | 1056.732 |
| 5 | 1069.838 | 1057.846 |
| 6 | 1066.897 | 1053.548 |
| 7 | 1060.850 | 1051.911 |
|----------+----------+-----------|
| Mean | 1065.25 | 1054.84 |
The improvement is more limited on kano because a longer PCIe
initialization delays EOP in the Late EOP configuration which make it
faster to complete.
CSME team confirms that:
1. End-Of-Post is a blocking command in the sense that BIOS is
requested to wait for the command completion before loading the OS or
second stage bootloader.
2. The BIOS is not required to actively wait for completion of the
command and can perform other operations in the meantime as long as
they do not involve HECI commands.
On Raptor Lake, coreboot does not send any HECI command after
End-Of-Post. FSP-s code review did not reveal any HECI command being
sent as part of the `AFTER_PCI_ENUM', `READY_TO_BOOT' or
`END_OF_FIRMWARE' notifications.
If any HECI send and receive command has been sent the extra code
added in `cse_receive_eop()' should catch it.
According to commit 387ec919d9f7 ("soc/intel/alderlake: Select
SOC_INTEL_CSE_SEND_EOP_LATE"), FSP-silicon can sometimes (on the first
boot after flashing of a Marasov board for instance) request coreboot
to perform a global request out of AFTER_PCI_ENUM notification. Global
request relies on a HECI command. Even though, we tested that it does
not create any issue, `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag should not
be associated to the `SOC_INTEL_CSE_SEND_EOP_EARLY' flag to prevent
potential a global reset command to "conflict" with the EOP command.
BUG=b:276339544
BRANCH=firmware-brya-14505.B
TEST=Tests on brya0 with and `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post sent soon after FSP-s and EOP message receive at
`BS_PAYLOAD_BOOT'. Verify robustness by injecting a
`GET_BOOT_STATE' HECI command with or without `heci_reset'. The
implementation always successfully completed the EOP before
moving to the payload. As expected, the boot time benefit of the
asynchronous solution was under some injection scenario
undermined by this unexpected HECI command.
Change-Id: Ib09dcf9140eb8a00807a09e2af711021df4b416f
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73619
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
In order for the code to find the correct VBIOS file in CBFS, remap the
revision ID in the RAVEN2_VBIOS_VID_DID case to the one that matches the
CBFS file name. This will make the code work as expected on devices with
the PCI ID RAVEN2_VBIOS_VID_DID and a revision != RAVEN2_VBIOS_REV.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94412dc2e778e7c4f74e475cd49114a00a81b2ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74045
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a new port for the Intel DQ67SW desktop board. It is
microATX-sized with an LGA1155 socket and four DIMM sockets for DDR3
SDRAM.
A list of tested working and non-working features is in the
documentation page.
Change-Id: Ifc703f2d0ad45495e71d3f7799347430f5196791
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I01f990408c4552b69c04e849e7faaf9f51f24a51
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:275644832
TEST=emerge-dedede coreboot
BRANCH=firmware-dedede-13606.B
Change-Id: I644f3aa3187e08146d78abb70a568833bc9b9211
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GPIOs according to schematics(ver. 20230308).
BUG=b:272829190
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Id414c9b0d94faffd2d71c348fc7146a6101196e9
Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
Initial hades GPIO config. Combination of original brya basebaord,
Agah and new arbitrage output for hades design.
Also moved GPIO config to the non baseboard variant model as we did on
rex0.
BUG=b:269371363
TEST=builds
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I2a850240dd7f3ddf137d6a2ebe8a147f8976c16b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch enables addition of core_type member to 'struct cpu_info' for
Alderlake platform.
TEST=Build and verify the code for Gimble
Change-Id: Ia065b98c2013e78328fd38bed9c667792d6d1f4d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74089
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The patch adds new member 'core_type' to the 'struct apic_path' and
updates core type information.
TEST=Build the code for MTL
Change-Id: I1d34068fd5ef43f8408301bf3effa9febf85f683
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Refactor map_oprom_vendev_rev as a preparation to also remap the
revision ID in the RAVEN2_VBIOS_VID_DID case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b81a9464ed49672889fcb767920154fe6efdfcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add early configuration of the GPIOs that control the M2 SSD resets.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I81439d193bdd7296d8a8fea83c5c6be2c75adbea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73989
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add option decode for USB-C DDI connection type and remove unnecessary
break after return.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: If38fa667daeb2dd176ecdf33abaec9b56d633a2f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This reverts commit 555ceca38a78 ("mb/google/rex: Enable VPU").
Reason: Unable to boot to latest OS image with VPU enabled.
BUG=none
TEST=Boot to OS image 15376 on google/rex
Change-Id: If61282528922304373d492b362056b52995cbcad
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The Realtek RTL8111E NIC is currently not defined as a child device,
resulting in the on_board flag not being set to 1. This means that
Linux / udev will call the device enp4s0 rather than eno0, as is
appropriate for on-board ethernet devices.
This patch defines the NIC as a child device of PCIe port 6, so that
it's properly defined as an on-board device.
Change-Id: I2e1b65e4d27852297a739e332c52c15a8c81b858
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74090
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Use enum cb_err as return value of fsp_find_range_hob instead of using
the raw -1 and 0 values. Also update the call sites accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id6c9f69a886f53868f1ef543c8fa04be95381f53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since the return value of the fsp_find_range_hob call is only used in
one location, move the call and return value check into the if condition
block to not need the status variable.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9e9251368b86382dc4e050cf176db79dbfb230
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
To remove the annoying "ESC [1m" at SimNow console window.
Change-Id: I300aee946f342f41b94288b75b843956de9d3e88
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To avoid having to calculate the length of a struct separately, rework
the code to give the struct a tag name, so that `sizeof()` can be used
instead. This involves refactoring the `get_emi_eeprom_vpd()` function
to return a struct instead of a union, so callers can no longer access
the EEPROM data as an array of bytes without additional code, but this
array view is only used inside `get_emi_eeprom_vpd()` when reading the
data from EMI.
Change-Id: Id1bc40939631baa131b5f60eadbfe42838294ebe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73983
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch avoids the redundant programming of SRAM BAR when
the SRAM PCI device is enabled. Rather read the PCH SRAM Base
Address Register while enabling crashlog feature.
Additionally, this patch relies on PCI enumeration to get the
SRAM BAR rather than hijacking the SPI temporary base address
which might have resulted in problems if SPI is disabled on
some platform with BAR being implemented.
TEST=Able to build and boot google/marasov and crashlog is working.
Change-Id: I8eb256aa63bbf7222f67cd16a160e71cfb89875a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:273791621
TEST=emerge-nissa coreboot
Change-Id: I1a6013e0ad0c430d83bbbad4b92392c8c4815b0d
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree according to yavilla's design.
Add Kconfig for TPM I2C bus.
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I1b44436a7f93d62764d0451c738ae33976a24a15
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Use die_no_apcb to cause a build error when the APCB or SPD sources are
not found.
TEST=builds with and without matching APCB and SPD sources
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I62dce2c71061bfc5c01e0344b7dc115a47669140
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This sets the location of the skyrim MP2 firmware within the mainboard's
blobs directory, and adds the Kconfig option to the mainboard directory
so that it can be enabled in a saved .config file.
The skyrim MP2 firmware is skyrim specific, so it should not be placed
in the main PSP AMD_BLOBS directory.
We will also only want to enable the MP2 firmware for chromeos builds as
it's not useful for non-chromeos builds.
BUG=b:259554520
TEST=Build MP2 firmware into image, see that it gets loaded
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I04be6f2d0b605d4eca37fd927a70310259dc106c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Instead of using the PSTATE SSDT generated by binaryPI, use the common
AMD code by selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE. To
match the SSDT from binaryPI, set ACPI_SSDT_PSD_INDEPENDENT to n. There
are two differences to the binaryPI SSDT: Now coreboot includes the C1
state in the _CST package instead of just having the kernel add this due
to the ACPI_FADT_C1_SUPPORTED bit being set and the address of the
PS_STS_REG P state status MSR is written to the corresponding field of
the _PCT package instead of being 0.
TEST=On Careena the new P and C state ACPI packages are nearly identical
to the ones from the SSDT from binaryPI with the two functional
differences mentioned above.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icdf6bc8f0e0363f185a294ab84edcb51322e7eb7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Both the algorithm and the registers involved are described in the
public version of BKDG #55072 Rev 3.09 in chapter 2.5.2.1.7.3.2 _PSS
(Performance Supported States).
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9b2c177d9d80c5c205340f3f428186d6b8eb7e98
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The help text for VGA_BIOS_SECOND_ID was outdated and from a time before
we found out that just looking at the CPUID doesn't reliably tell us on
which type of silicon we're running and which VBIOS file to pick, so we
had to use a different method. Update the help text to match what the
code does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia568771ed7dfa0c7bb850b0efcd2959d7ddfd4a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73335
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, the transition and bus master latency are always
written as 0, but on but on Stoneyridge hardware-dependent values are
used. Introduce get_pstate_latency that returns 0 for all non-CAR AMD
CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I81086fa64909c7350b3b171ea6ea9b46f1708f67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Introduce get_pstate_0_reg and use it in tsc_freq_mhz to get the P state
register number corresponding to P state 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b92a858bf36b04a570d99c656e5ccfc84457724
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
On the Zen-based CPUs, P state 0 corresponds to the first P state MSR,
but on Stoneyridge this isn't the case. Introduce get_pstate_0_reg that
returns 0 for all non-CAR AMD CPUs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc11e5b6099d37edb934e66fe329d8013d25f68d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the MSR access into a function with a more descriptive name.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I331c3205390edcbd8749b2d52b7cc7ac3a8ced5a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The C state ACPI packages binaryPI generates and passes to coreboot in
the PSTATE SSDT only include the C2 state, but the kernel will add the
C1 state to its usable C states in this case. The native C state code
will generate both the C1 and C2 state packages to be more complete and
also to be more in line with the other AMD SoCs.
The code added in this commit isn't used yet, but will be used as soon
as Stoneyridge will be using the common AMD generate_cpu_entries by
selecting SOC_AMD_COMMON_BLOCK_ACPI_CPU_POWER_STATE once all needed
helper functions are implemented for Stoneyridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I06f90306ac196704e0102d0da6eab03f51513c29
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74001
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option is valid for all SoCs
with Zen-based CPU cores including the family 1Ah, so remove the suffix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I58d29e69a44b7b97fa5cfeb0e461531b926f7480
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74015
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the static mhz variable inside the only function that is accessing
it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ief98c0a1c35fe1bbc4ff38dd175f12e0b3ddc515
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz. In the case of the CPU frequency divider being 0,
get_pstate_core_freq will return 0; in this case that shouldn't happen,
TSC_DEFAULT_FREQ_MHZ will be used as frequency, since for the TSC
frequency it's better to err on the end of the expected frequency being
too high which will cause longer than expected delays instead of too
short delays.
Now that the code is using get_pstate_core_freq, this code is valid for
Glinda too, so also remove the comment on the
SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H option being selected in the Glinda
Kconfig. This Kconfig option will be renamed in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01168834d4018c92f44782eda0c65b1aa392030d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use get_pstate_core_freq instead of open-coding the calculations in
tsc_freq_mhz.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If5d526e6b365c62a6669241f4fcdd25eca3f15fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This function will be used in follow-up patches for both the TSC rate
calculation and the still to be implemented P state ACPI table
generation in coreboot. The was checked against BKDG 52740 Rev 3.05,
BKDG #55072 Rev 3.04, and BKDG #50742 Rev 3.08.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9afaa044da994d330c3e546b774eb1f82e4f30e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Factor out the get_pstate_core_freq function from the SoC's acpi.c files
to both avoid duplication and to also be able to use the same function
in the TSC frequency calculation in a follow-up patch. The family 17h
and 19h SoCs use the same frequency encoding in the P state MSRs while
the family 1Ah SoCs use a different encoding. The family 15h and 16h
SoCs use another encoding, but since this isn't implemented in
Stoneyridge's acpi.c, this will be added in a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8619822c2c61e06ae5db86896d5323c9b105b25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Due to a non-constant TSC rate before the microcode update is applied,
the Performance Time Stamp Counter is used instead. To clarify this, add
a comment to the timestamp_get implementation. See commit 24079323d4d8
("soc/amd/stoneyridge: provide alternate monotonic timer") and the
description of the TscInvariant bit in CPUID Fn8000_0007_EDX Advanced
Power Management Information in the public version of BKDG #55072 Rev
3.09 for more details.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I824b372c36fa6f3eb912469b235a9474f6a58ff5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74018
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
set pwr_on_varybl_to_blon to 0x1c, which means fw will delay 112ms
between backlight on and vary backlight.
BUG=b:271704149
BRANCH=none
TEST=Build; Verify the UPD was passed to system integrated table;
measure the power on sequence on whiterun
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ib966d2ebd4ef4a8085695901ec5da160f467e32e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73753
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UPD parameter for eDP power sequence adjust.
The pwr_on_vary_bl_to_blon is set one unit per 4ms.
BUG=b:271704149
TEST=Build; Verify the UPD was pass to system integrated table;
measure the power on sequence on whiterun
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I25c9f962e70f599c780259f0943a03f8aa7cbfd1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Update UPD structure to align with MDN-FSP.
BUG=b:271704149
BRANCH=none
TEST=Build/Boot to Chrome OS
Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Ie4021cebb57e3ec22191486aafd9099eec0fbd99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Add socket type for Meteor Lake as PROCESSOR_UPGRADE_OTHER.
BUG=None
TEST=processor upgrade is equal to "Other" for "dmidecode -t 4"
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: If891990436a0679697e292b460eaec63c09e7bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add GOOGLE_SMBIOS_MAINBOARD_VERSION flag for rex board.
BUG=None
TEST=Verfied board ID for rex using "crossystem" command, giving the
output as 1.
Without CL:
localhost ~ # crossystem
arch = x86 # [RO/str] Platform architecture
backup_nvram_request = 1 # [RW/int] Backup the nvram somewh
battery_cutoff_request = 0 # [RW/int] Cut off battery and shu
block_devmode = 0 # [RW/int] Block all use of develo
board_id = (error) # [RO/int] Board hardware revision
clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done
With CL:
localhost ~ # crossystem
arch = x86 # [RO/str] Platform architecture
backup_nvram_request = 1 # [RW/int] Backup the nvram somewh
battery_cutoff_request = 0 # [RW/int] Cut off battery and shu
block_devmode = 0 # [RW/int] Block all use of develo
board_id = 1 # [RO/int] Board hardware revision
clear_tpm_owner_done = 0 # [RW/int] Clear TPM owner done
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: I644ed7a948f0094a0be080153d83eaa2e37b8f1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74037
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0cd6141bb8baa082d5558490533649f907f25dd1
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib885c4dd8472ed2b0a61c548f6ef652979a33153
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There are two conditions within the config space dump code, one to
print offset, one at the end to put a newline. Tweak the printk
strings so the first conditioned printk does it all and move the
second printk out of the loop to the very end.
Change-Id: Ie9dc744406ba20412892df96720e88e24c3d52bc
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73887
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the mem_parts_used.txt, generate Makefile.inc and
dram_id.generated.txt for this part.
DRAM Part Name ID to assign
K3KL6L60GM-MGCT 5 (0101)
BUG=b:267249674
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I20a12a58d8a3d66a901a14569ca710acba3c05f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73920
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
From Meteor Lake onwards Intel FSP will generate the Trace Hub related
HOB if the Trace Hub is configured to save data in DRAM. This memory
region is used by Trace Hub to store the traces for debugging purpose.
This driver locates the HOB and marks the memory region reserved so
that OS does not use it.
Intel Trace Hub developer manual can be found via document #671536 on
Intel's website.
Change-Id: Ie5a348071b6c6a35e8be3efd1b2b658a991aed0e
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
The API finds the FSP resource HOB for the given GUID.
Returns the pointer to the HOB if found, otherwise NULL
Change-Id: I4ebc9b7d214e5fc731ae45f28e7f5732a7635cbc
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch adds a check for zero based SRAM base address. It will
help to avoid running into problems if the SRAM is disabled and
the base address register is zero.
TEST=Able to build and boot google/marasov with PCH SRAM being
disabled.
Change-Id: Iebc9dc0d0851d5f83115f966bf3c7aad1eb6bc01
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update header files for FSP for Meteor Lake platform to version 3084_85, previous version being 3064_81.
FirmwareVersionInfo.h:
1. Define INTEL_FVI_SMBIOS_TYPE macro
FSPM:
1. Remove deprecated UPD `BclkSource`
2. Address offset changes
FSPS:
1. Add `CnviWifiCore` UPD
2. Address offset changes
BUG=b:274051289
TEST=Able to build and boot google/rex to ChromeOS.
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I24dea1a31dbb592f9dea4246a3d490e5d23dca9c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73832
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure GPIOs according to schematics.
BUG=b:273791621
TEST=emerge-nissa coreboot
Change-Id: I5a522b59468667d20674d55597cc06975bc12ab5
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2021a106e0d3a603b1a05296411700ffea32fc8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move map_oprom_vendev to graphics.c to match the other AMD SoCs. Also
change the comment style to be more in line with the rest of coreboot
and drop the unneeded line break in the printk call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icc1f3d73fba973413c5a22e2f5ae01bc58bc3e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Fix the VGA_BIOS_ID IDs to match the PCI IDs in the VBIOS binaries and
the PCI ID Stoneyidge's map_oprom_vendev returns. This fixes the problem
that the display wasn't initialized due to not finding the VBIOS file in
CBFS. This bug in the Stoneyridge Kconfig was unmasked by commit
42f0396a1028 ("device/pci_rom: rework PCI ID remapping in
pci_rom_probe").
TEST=Display in Careena lights up again.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4d1e6a3a65d7d7b07f49df9ce90620b79d9a2d78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74019
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Change to use simple device function for setting PMAX_LOCK because
the Sapphire Rapids PCU device is not scanned during coreboot PCIe
bus scan and would see "PCI: dev is NULL!" failure.
Change-Id: I3156a6adf874b324b5f4ff5857c40002220e47ab
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72400
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ica512d21d1cef8ccffbc093016c7a3bfcf901b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73488
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently ifdtool --validate will not correctly validate the FMAP
against the IFD regions, since it will compare the IFD bios region with
an FMAP region called SI_BIOS.
It's probably a good idea to define default name for the BIOS FMAP
region like we have for 'COREBOOT' or 'FMAP' FMAP region.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I55eddfb5641b3011d4525893604ccf87fa05a1e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
On systems that do not provide their own *.fmd (Flashmap) file, we
fall back to a default flashmap file. That file however does not contain
the blobs (ME, GBE ...), that are usually placed below the BIOS Flashmap.
It can therefore easily happen that the placement of the blobs collides
with the placement of the BIOS region (e.g. if CBFS_SIZE is big enough).
The fmaptool can't catch that, since it does not know of the blobs
placement.
This patch basically maps the regions described in the IFD (Intel
Firmware Descriptor) to the default Flashmap.
Test: Build and see that build/fmap.fmd contains all blobs now (on intel
systems that are supported by the ifdtool)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I82cb252fff456773af69943e188480a4998736fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Stoneyridge uses the serial voltage ID 2 standard to tell the VRM on the
board which voltage it wants, so select the SOC_AMD_COMMON_BLOCK_SVI2
Kconfig option to have the corresponding code to decode the raw SVI2
value into a voltage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7d7031d9ad997a86c18d0e9e7af9a88ddf2d873c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Set open-drain GPIOs for ChromeOS as input and bias-disable mode.
After applying this patch, the voltage of these pins will become the
expected value 1.8V (previously 1.0V), preventing wrong judgement of
low/high.
Reference document:
MT8188G_GPIO_Formal_Application_Spec_V0.3
BUG=b:274058085
TEST=build pass
Change-Id: I057716df6c59efb84fc395109db022b82ce528c4
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73963
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD usb3_port_force_gen1 for skyrim
The default setting is set to disable
Skyrim -> set default as disable
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify the setting will be applied on skyrim.
Change-Id: Id53bed82a9fef93b574c3f30830555e02d7f4737
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idb6087dc44e76ab63bc6b462c3328c23d83ae018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74009
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
A core voltage ID larger than 0xff shouldn't happen, since SVI2's core
VID is only 8 bit long. In order for making it more difficult to use
this function in a wrong way that results in a very wrong voltage being
returned, also return 0 for those invalid core VID values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I95417c45db86cd2373879cdad8a07fb9eb8dfdda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74000
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD usb3_port_force_gen1 to support USB3 port force to gen1
BUG=b:273841155
BRANCH=skyrim
TEST=Build, verify USB3 port setting to gen1.
Change-Id: Iaa476f56cf10588d7de2203deca4122958c00783
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
To add fch_usb_3_port_force_gen1 parameter to force usb3 port to gen1
BUG=b:273841155
BRANCH=None
TEST=Build
Change-Id: I7560abb9a5fda6af3c2814f8b26c92925d8c17f4
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add UPD vrm_current_limit_mA, vrm_maximum_current_limit_mA, vrm_soc_current_limit_mA for DPTC.
Make sure UPD parameterare are set to be aligned.
BUG=b:245942343
BRANCH=none
TEST=confirm the UPD parameters has been set correspondingly with the FSP UPD.
Change-Id: Iacf0ce0d51d4c8698ec1ae7e810fd00574deeadb
Signed-off-by: Patrick Huang <patrick.huang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73875
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs which will be
used in future patches to generate the P state ACPI packages for the CPU
objects. BKDG #55072 Rev 3.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I944c8598ba95a0333124655c61ef9eba8a7595c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73998
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that all get_pstate_core_power implementations in each SoC's acpi.c
file is identical, factor it out into a common implementation. This
implementation will also work for Stoneyridge which isn't using the
common P state code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba3833024a5e3ca5a47ffb1c1afdbfd884313c96
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73997
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since SVI3 has the CPU voltage ID split into two parts, a serial voltage
ID version specific function is needed to get the raw core VID value.
This will allow making get_pstate_core_power common for all AMD CPUs in
a follow-up patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71ca88c38b307558905a26cce8be1e8ffc5fbed4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73996
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of implementing the conversion from the raw serial voltage ID
value to the voltage in microvolts in every SoC, introduce the
SOC_AMD_COMMON_BLOCK_SVI[2,3] Kconfig options for the SoC to select the
correct version, implement get_uvolts_from_vid for both cases and only
include the selected implementation in the build.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I344641217e6e4654fd281d434b88e346e0482f57
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73995
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add WIFI SAR table for omnigul.
BUG=b:273170023,b:273652516
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I2db057371754961503cfdc59f21c365fc82672c4
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73940
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change preprocessor #if to a regular if and let the compiler optimize
away the unused branch.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7af747812a448064ac6b38686b8bd616a755932e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Set orientation to LB_FB_ORIENTATION_BOTTOM_UP to align the volume
up/down direction with menu up/down in FW screen.
BUG=b:274749478
TEST=see FW screen in portrait mode.
TEST=volume key behaves as expected
Change-Id: If32859c4bf256c97147622ff04a17fc2ec80303d
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Enable SBU orientation handling by SoC for both USBC port2 and USBC
port3.
Constitution USBC port1 has retimer but USBC port2 and USBC port3 don't,
they do not flip the data lines, hence we need to set bits for USBC ports.
Change-Id: I4c5dfdba6c38c6e2f308b281ed316bb687ad8d8b
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Remove the sleepstates.asl as it was written for SOCs pre-Skylake
and not needed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I46fe934c2a50b3d61575f66f0881ab6754fe8dc9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Birman requires 4-byte addressing for flash.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Id732129cfc14bb47e8f3d7f3de479815e040ea16
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add Kconfig option to force 4-byte addressing mode.
Some platforms require the flash to stay in 4-byte addressing mode where
it expects 4-byte addresses on regular commands.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e41da2a78285c23c1c1d97eaf3969749812327b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Move EC FW from a CBFS file to an FMAP entry and rename the EC signature
section to EC_SIG.
An offset of (16M - 512K) was chosen to line up the EC FW before the
RW_MRC_CACHE.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9b19d92043790b10acd20fbfdf394d5bd67b8295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch moves USB Port Status and Control (PORTSC) Reg definition
into IA common code to allow other SoC code to reuse it without
redefining the same for each SoC.
TEST=Able to build and boot google/taeko where USB wake is working.
Change-Id: I6b540eab282403c7a6038916f5982aa26bd631f8
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73956
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For some Xeon-SP (such as SPR-SP), more buses should be probed.
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ica3c61493a0ff6c699b500f30788b2cf5a06c250
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
Add support for Intel SPR-SP to uncore_acpi.c.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Change-Id: I4c436a60743bee21b3b6e4060d7874a6cdc75ecf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71958
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Commit 65c456227e1 (mb/asrock/b75pro3-m: Add CMOS layout/defaults and
vbt.bin) introduced CMOS settings for selecting CPU_FAN{1,2}, but this
code was never implemented. Remove the fake setting for it.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ic2f4aa42f9cfd77defc2a11e16643690356bc26b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch drops the UFC sensor OV2740 (reused from the Brya chassis)
support for Rex and added support for Rex specific UFC sensor HI-556W.
BUG=b:269499723
TEST=Verified UFC is working on google/rex Proto 1.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6b8ac08adec351a103ac1764d974db4881dc4d6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70225
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The included acpi/acpigen.h provides the cppc_config struct and nothing
in this header file is using the cppc_config struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia91fd4105e6872d812f595447783d02a0dd1568b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73993
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the code was made common in commit 8f7f4bf87a23 ("soc/amd/cezanne,
common: factor out CPPC code to common AMD SoC code"), the include guard
wasn't renamed accordingly, so do that now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9eefe2065fae31e97aa4e6710008a6f9712bed40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73992
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Picasso and Cezanne use the serial voltage ID 2 standard to communicate
the CPU voltage to the voltage regulator module on the mainboard, while
Mendocino, Phoenix and Glinda use the serial voltage ID 3 standard for
this. Both standards encode the voltage in a different way, so add the
serial VID version number to the defines to clarify for which version
the define is.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8ddab8df27c86dc2c70a6dfb47908d9405d86240
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73994
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Mendocino uses the SVI3 standard for CPU core voltage control which uses
9 data bits instead of the 8 in the SVI2 case and also calculates the
actual voltages with a different formula. The Mendocino code uses the
correct formula since commit 8d2bfbce23f6 ("soc/amd/sabrina/acpi:
Correct VID decoding on Sabrina"), but the MSR definition in the PPR
hasn't been updated to show the additional bit. The definition of the
register that is mirrored by these MSRs descries this 9th CPU voltage ID
bit though. Since this bit is expected to be zero, this shouldn't cause
a change in behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I05acd239300836a34e40cd3f31ea819b79766e2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73969
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Program some FSP settings as requested by Prodrive.
Change-Id: I04548e5eddc8a6be3a03b5dd9062470b4ef85adb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73949
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Atlas stores VPD (Vital Product Data) in an I2C EEPROM, which is only
connected to the EC. In order for the host (x86) to be able to access
the VPD, the EC reads the EEPROM contents into a buffer in EC RAM and
provides the host with read-only access to this EC RAM buffer through
EMI (Embedded Memory Interface) 0.
The VPD layout is designed to be extensible yet backwards compatible.
The code in coreboot uses the revision field to know which fields are
valid, and will populate the rest with fallback values.
Use the serial number and part number in VPD to populate SMBIOS tables.
Change-Id: I2d3d70fee22548daa73ef98af56c98e950dc5e9d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Implement initial support for EMI (Embedded Memory Interface), which
Microchip describes as "a standard run-time mechanism for the system
host to communicate with the Embedded Controller (EC) and other logical
components". EMI allows the host to access regions of EC memory without
requiring any assistance from the EC.
For now, Atlas only uses EMI 0. This change enables EMI 0, subsequent
commits will read data from it.
Change-Id: Ia899ae71e97f9fc259397dfb5fb84ca06545f5d8
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For SPR-SP, the SMM_FEATURE_CONTROL register is in UBOX_URACU_FUNC
instead of UBOX_DEV_PMON.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: Ide46c5f9cdf65b7e05552449b08ad4d7246664cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71962
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Keep clean copies of PSP and BIOS table. Refresh the working tables
before they are filled with file names and other information at each
iteration.
Change-Id: Ie8339a4d66c38e02180cbf99e13914bfff66dc0f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: I6b69965991daadaf8b4148b06d0715b087021c9b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Don't call system call directly.
Change-Id: I6da31723bc2bfc1197fc31962053671c84ccc397
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
To reduce the size of amdfwtool.c which is already too big.
Change-Id: Ib80eeb42f59a3dda04402b2feaadc1d178ed989e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
When encountering really incompatible memory configurations, post a
standard POST_RAM_FAILURE code when dying. Gone are the "HALT"
messages that no longer serve any good purpose, instead fatal messages
are edited to always end with "!" to make them stand out even with
loglevel prefix off.
Change-Id: Ie1b9e5a0415e4c64b1f4e935689263f62db012b2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The _LO part in the definition names is a leftover from before moving to
the pstate_msr union access to the bitfield elements where it still
mattered if a bit was in the lower of higher half of the MSR. With the
mask-and-shift access to the two parts of the MSR being gone, the _LO
part in the name isn't useful any more and possibly a bit misleading, so
drop that part.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib43c71e946388c944ecf40659d4c12ca02a27a5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73927
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|