| Age | Commit message (Collapse) | Author |
|---|
|
Remove the cnvi_bt_audio_offload because it is already probed in
variant.c for moli.
BUG=b:235426221
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I15077ca161b6283e764105d1c2fbc59ead1fd761
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
enable use_custom_pld to match the custom physical location define.
BUG=b:235426221
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I62d133eed02faf4e5ad054a0901f73b1196c4c6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Won Chung <wonchung@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Apparently all nine HP Sandy/Ivy laptop variants select
MAINBOARD_USES_IFD_GBE_REGION. So let's move it to the COMMON section.
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Change-Id: I48e0d03c59d3ba013b479b59df8a15a0f8d23c50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This patch implements API to sync between core
PRMRR(Processor Reserved Memory Range Registers).
Read PRMRR base and limit value from BSP and apply it on the
rest of the cores.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I720669139429afc3d8c8d15c0ce15f1524f22e4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64976
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Currently, ADL FSP headers and RPL FSP headers differ. Set a RPL only
upd for adlrvp with Raptor Lake silicon. This code can be removed once
ADL and RPL start using the same FSP.
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I4e69323949233aa8c325a757b28b9d80cbdf4322
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64738
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia24a502994d24f3341273c5e6f768687ad20baf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65113
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The general purpose PCIe clock outputs 0, 1 and 3 are used with their
corresponding clock request pins, so set the gpp_clk_config to
GPP_CLK_REQ for those and disable the unused output 2. This matches the
DXIO descriptor in port_descriptors.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I38ab8d6d824617509fdd18f06d5593889ec50666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65112
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In x86 processor as per Software Developer's manual there are 2 ways to
get CPU topology by querying the processor. BIOS can use CPUID
instruction using CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) as input or
CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F) as an input. Both will return
valid CPU topology data.
While CPUID_EXTENDED_CPU_TOPOLOGY (0x0B) returns data related to number
of threads, core and package, CPUID_EXTENDED_CPU_TOPOLOGY_V2 (0x1F)
provides more granular information regarding Die, package etc.
coreboot uses V2 to in order to query and return CPU topology data as of
now since that's the highest instruction of CPUID which is supported,
there is a mismatch in the way FSP processes the data.
FSP queries coreboot MP services to get CPU topology data which uses
structure which is either compatible with CPUID_EXTENDED_CPU_TOPOLOGY or
CPUID_EXTENDED_CPU_TOPOLOGY_V2. Since coreboot returns V2 data in
structure which is expecting data for CPUID_EXTENDED_CPU_TOPOLOGY, there
is hang observed on ADL_N CPUs.
To solve this problem coreboot should assign CPUID_EXTENDED_CPU_TOPOLOGY
data to processor_info_buffer->Location structure so remove use of
CPUID_EXTENDED_CPU_TOPOLOGY_V2
Ref EDK2 code: https://github.com/tianocore/edk2/tree/edk2-stable202202
Files:
MdePkg/Include/Protocol/MpService.h#L182
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2127
UefiCpuPkg/Library/MpInitLib/MpLib.c#L2120
Ref doc: Software Developer’s Manual volume 3 CH 8.9
BUG=b:220652104
TEST=Build and boot ADL-N RVP with debug FSP and verify CPU topology
value and observe system boots (no hang).
Change-Id: I1e6832fb03fcc59d33df0ba1664019727185d10a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
`make clean` never thoroughly removed LinuxBoot build artifacts. This
change checks for kernel directories present in the project directory
and deletes all of them, if found.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ia056ac6608e3631dfc270ba5c2f32216c3e1ac50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65098
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In addition to change CB:40316 this commit proposes a change of default
behavior inside of the LinuxBoot toolchain.
Currently the defaults build a LinuxBoot payload which boots into the
u-root shell and waits for input. In fact it does not deliver any
bootloader with it, but the build image is on the other hand rather
small.
This commit changes the defaults in a way that the LinuxBoot
bootloader will actually be able to boot a local or remote system image.
In consequence the build payload size is rather big, but accepted for a
working out-of-the-box startup behavior.
See discussion on that topic in the above mentioned change.
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Change-Id: Ieaba7e523aef10c467a8bea29ae323e22324b225
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40527
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the file template for creating a new variant of Nissa.
BUG=b:229550821
Signed-off-by: Shou-Chieh Hsu <shouchieh@google.com>
Change-Id: I04f75ff91f9851b82641f703ba950b04c22e2e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This change fixes wrong type-C port number for voxel. Voxel
uses tcss_usb3_port1 not tcss_usb3_port3.
BUG=b:231344977
BRANCH=volteer
TEST=Check the transactions are happening on correct port. Also checked
retimer firmware update on both the ports.
Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com>
Change-Id: Iba7b3b15296bed99d3626a6d53dfd59e8d20fe5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64022
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update configs for NixOS 22.05.
pulseaudio-modules-bt has been abandoned, and is superseded by
pulseaudio's native Bluetooth functionality. Thus, remove it.
Change-Id: Ic3b1dbc3c2ab092b576ba2151c93c74d4f298efc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Sabrina only has 4 PCIe clock outputs with corresponding clock request
pins available, so only make those 4 configurable in devicetree and
disable the rest unconditionally.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5d34fa680dd20a6eec86cc278c1c901b3231df83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65089
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The u-root toolkit dropped the original uinit bootloader in the master
branch and respectively the systemboot-option in templates.go. In
consequence the LinuxBoot builds will boot into the u-root shell and
waiting for input. This commit enables the reuse of the -uinitcmd flag
to specify a command, which runs after the u-root init-process.
Systemboot as a bootloader wrapper will mimic a BIOS/UEFI boot device
selection. Other preselections, i.e. stboot and boot2 are implemented as
well. Custom strings or programs can be set as well, but they cannot
contain program flags. E.g. 'fbnetboot -class linuxboot' will not work,
because they aren't symlinkable.
This commit and its respective LinuxBoot builds with systemboot, none
and one custom option have been tested successfully on a UP squared
single board computer with the intended behavior.
Change-Id: I4ac3409040ea77a1836f90f43fba07d2cd05a952
Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This is a breaking change for now when using latest u-root main, which
is the default behavior in LinuxBoot.
u-root switched to golang modules and therefore `go get` is not the
standard behavior anymore. The workaround for this is to pull the
repository and build directly in the directory for now. Another apporach
would be to use `go install $pkg@latest` to install the binary at that
particular version into the golang binary path.
Currently missing is a control structure to enable the build process for
legacy versions <v0.8.0.
Signed-off-by: Patrik Tesarik <patrik.tesarik@9elements.com>
Change-Id: Ifa03504da6fa321ffc6d2506b27ebd2e3ed9961b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65090
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Update SoC GPIO setting of unused I2C camera pins according to beadrix
schematics.
GPP_H6 : NF1 -> NC (AP_I2C_CAM_SDA)
GPP_H7 : NF1 -> NC (AP_I2C_CAM_SCL)
BRANCH=dedede
BUG=b:235005592
TEST=on beadrix, validated by beadrix's camera still working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I8be57406a44096c764c1faa8f45267d08c4694fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64971
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel LPC devices have generic and fix IO decode ranges. This CL is
smarter about using generic ones, by using the fixed ones first.
Change-Id: Ifd98bcc639ee08d068956a33b0e12cc70211ca2d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65097
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FW_CONFIG probe for daughter board LTE and mainboard SAR
according to beadrix schematics.
BRANCH=dedede
BUG=b:226910787, b:213549229, b:233983127
TEST=on beadrix, validated by beadrix LTE working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I126a1c548b6314acc0749fcfbdffd8f482c4f46c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The APOB data in DRAM is larger than the 96 kBytes of RW_MRC_CACHE, so
it won't fit in the flash and makes soc_update_apob_cache return early
before writing the APOB data from DRAM into the flash with this warning:
[WARN ] RAM APOB data is too large 1db18 > 18000
Increasing the RW_MRC_CACHE size to 120 kByte fixes this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I763d20f504d4f5b7cea68f21f409de9a1035f440
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64555
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The T6 of PS8640 power on sequence should be larger than 0ms, but it's
-0.062ms now. Add 100us delay between VRF12 and VCN33. The PS8640
power-on sequence is described in the "PS8640_DS_V1.4_20200210.docx".
BUG=b:235448279
BRANCH=None
TEST=The sequence T6 is larger than 0ms when power on.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I0b8a37d6119dc027a9d1c0a62c087b0a7ef14cac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some eMMCs (for example, Kingston-EMMC64G-TX29-HP) may enter the ready
state by sending CMD1 twice. If it is in the ready state, then the
payload (for example, depthcharge) will not send CMD1, but the access
mode is only available from the response of CMD1.
Therefore, we need to pass the access mode to the payload by defining
the following types:
- MMC_STATUS_CMD1_READY: in ready state and access mode is byte mode.
- MMC_STATUS_CMD1_READY_HCS: in ready state and access mode is sector
mode.
BUG=b:234672726
BRANCH=cherry
TEST=boot ok
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Change-Id: Iad905781d8ba0105911cf87a6b845cd8df57521e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65054
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The TBT device can't be recognized after we re-plug it at DB type-c
port. Intel found that tbt_pcie_rp0 has mapping error after each
re-plug. From Intel suggestion, we enable TBT PCIe RP0 to fix this
problem and take this as short term solution. Intel will implement
re-mapping mechanism in ACPI for long term solution.
BUG=b:230141802
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I61429033dfe64d67916167bb901bdd8246db953e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Make the config file reflect reality instead of using the old cezanne
copy.
TEST=Build chausie
BUG=b:220848549
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I8362bc19875ae152e0deab7f64d5b1c50929b95b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: I591c6a69f0971c3f4fdb8bb54a7f54c948caa648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65076
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Modify the config file, consumed by amdfwtool, to use "sabrina" and
"SBR" named files.
TEST=build chausie using updated amd_blobs
BUG=b:220848549
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ia993644e67d14792d753cc74a957529d15be18f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This contains the following commits:
* 89fae13 sabrina: Add placeholder blobs
* 3c5b627 cezanne: Upgrade PSP to 00.11.0D.75
* 8966a32 cezanne: Update ABL to 0x23216071
* 50cb4af cezanne: Upgrade ABL to RABLCZN1C276070
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Change-Id: Ib92ac995eadd53b7c392790e8e36bab3dbb8a982
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM
features from RTD3.
TEST=Check SSDT table to see if the PXSX device and PowerResource RTD3
are generated under the root port.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I74434d833086f639927d8369f8a6e3af31dd99e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64648
Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:229134437
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Ib0531ff736ed7ac52bff8607b26b3e7f1d3ac3ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I12eab0fe2a3c21011f50c72718514fbc90cbe658
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Until FSP for RPL and ADL align, mainboards using RPL should select
SOC_INTEL_RAPTORLAKE and SOC_INTEL_ALDERLAKE_PCH_* together.
Currently, ADL FSP headers and RPL FSP headers differ. Use RPL FSP
header with Raptor Lake silicon. This code can be removed once ADL
and RPL start using the same FSP.
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=build adlrvp_rpl_ext_ec
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iaf95352b9cafb81f23522bcf63753d199c0420eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
The Sabrina APU has a maximum configuration of 4 physical cores with 2
threads each, so a total of 8 CPU cores.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I627ed78ffba6098726c9c8ec55b60665503240ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65068
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MCA bank names were checked against PPR #57243 Rev 1.53.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1b947e686a0306d4468203103f91107c15ececc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina slightly changed the names of microcode patches. Adding a
wildcard to support the new name without breaking current builds that
are using the placeholder CZN binaries.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I86caf0ba5c15f64a9a1f0e76a3186919e5e761a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65069
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the MS bit in EC SW02 register to enable s0i3
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I97b6adf48b49635251c70015f1d87fd8ca11d539
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Newer host versions of gnatbind miss these when building the cross
gnat1 and gnatbind.
Tested with the following host compilers with and without bootstrapping
that the resulting coreboot images of three boards stay the same:
* GCC 4.9.2 (Debian)
* GCC 6.3 (Debian)
* GCC 7.4 (Debian)
* GCC 8.3 (Debian)
* GCC 9.4 (Debian)
* GCC 10.2 (Debian)
* GCC 12.1 (ArchLinux)
Change-Id: I09c6b3cc7b15f1c505acd3ec2c1959b101d6dfb7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65000
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We used to disable individual warnings that are expected when building
our GCC version with a newer one. Not all warnings can be disabled
indvidually, though, and it's much easier to simply allow warnings.
As a plus, we get the warnings in the log (in case anybody would ever
look into it).
Partially fixes building with host GCC 12.1.
Change-Id: I8fafec4fc49db73b6dba311c775eea2cc92a9b48
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Set all FSP S UPDs that set IDs to 0, which allows them to be set
by coreboot.
Tested on StarLite Mk IV and LPC now has the correct device ID of
0x31e8, where previously it had 0x7270.
The UPDs differ APL and GLK, but the ones configured in this patch
have been there since their initial releases.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I034c9dc9d81c4d775dfff0994c9a6be823689b1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
1. enable DDI_PORT_1, DDI_PORT_3 hot plug detection to let
tcp0 and tcp2 can display
2. remove DDI_ENABLE_DDC for Port 2, because tcp-dp dosen't need to
enable DDC
BUG=b:234521799
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I1354b82d881ebd838c310b32ae28ac2628ab8c9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64819
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable USB retimer in moli overridetree.
BUG=b:233869074
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Ib7ea0b0d85776857d07e129935059397720fa0e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
In Adl-P RVP, those interfaces are used as USB ports.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I322280ab02361e3a2a5925d69f33b23453d36dbf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63946
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Jeremy Compostella <jeremy.compostella@intel.corp-partner.google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use clock src and clock req to 7 for x4 slot.
Remove free running clock setting for clock 6.
Configure gpio for source clock OEB native function going to x4 slot.
BUG=b:233252409
BRANCH=firmware-brya-14505.B
TEST=insert SD AIC to x4 slot. boot to OS and use 'lspci' to check
the device.
ex:
58:00.0 SD Host controller: O2 Micro, Inc. Device 8621 (rev 01)
NOTE: The bus number varies.
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: Iba5d83d133b6ae8cd389ddd971db308170094300
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63945
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Add fan speed rpm control for DPTF based Active2 policy as per
document #626708, by utilizing existing FAN0 variable from
src/ec/google/chromeec/acpi/emem.asl#18.
There is no corresponding EC change required for this policy
support because EC fan code already exporting this rpm value
using EC_MEMMAP_FAN for FAN0.
BUG=b:224457192
BRANCH=None
TEST=Built and booted on ADL-P based Brya system and
verify the fan speed in rpm under sysfs path
cat /sys/bus/acpi/devices/INTC1048\:00/fan_speed_rpm.
Change-Id: Ibb1646b1fb1659fd853ece97d97bb9dee2a3f57e
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Sabrina uses the SVI3 spec for VID tables which is incompatible with the
SVI2 spec used on PCO/CZN. Move the defines from common to soc and
update the decoding for sabrina.
See NDA docs #56413 for SVI3 and #48022 for SVI2 VID tables
TEST=timeless builds on mandolin/majolica for PCO/CZN
build chausie and verify pstate power is correct in ACPI tables
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I915e962f11615246690c6be1bee3533336a808f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65001
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Currently, custom TianoCore builds are allowed, but those may need
different parameters. Add a Kconfig option to specify additional
parameters to be appended to build command.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Change-Id: I025459ae94592103b4be0c68b422100b7c649d34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
When the CMOS option `power_profile` is set to Power Saver, disable
Burst.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4d9367306b3c0e83252cea3ee4c2733c8729d10c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65011
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Shotzo is not a laptop (it is a Chromebase), therefore deselect
BASEBOARD_DEDEDE_LAPTOP.
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: I4669ef163e4bd8f2de556a051197802ee2d54927
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65015
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the shotzo variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.).
BUG=b:235303242
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_SHOTZO
Change-Id: Ia3dc9ea6d1b369b54a966ad86f1531305b8a7f57
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65014
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
mainboard_vbt_filename() is to decide which VBT to return,
but moli only has one VBT, so it doesn't need this function.
BUG=b:234521809
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Ia9c1495c8cb7bf7b47d9c616891a791a32b9d805
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64848
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch drops enable_bios_reset_cpl() as FSP sets the BIOS Reset
CPL before performing Graphics PM init (as part of FSP-S), hence,
enable_bios_reset_cpl() function getting called inside systemagent.c
is meaningless.
Also, drop 1ms delay after setting the BIOS reset CPL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I87beb444d3910f212a5a627cb449031db6cae38d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64837
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch provides an option for CPU programming where coreboot
expected to load second microcode patch after BIOS Done bit is set
and before setting the BIOS Reset CPL bit.
BUG=b:233199592
TEST=Build and boot google/taeko to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I426b38cb1200e60398bc89515838e49ce0a98f06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64836
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add header files generated from FSP 2173_00 source build for Meteor Lake platform.
BUG=b:234701164
TEST=util/abuild/abuild -p none -t google/rex -a -c max
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: I8b1caa4bc09f09005859e6c8853d14b8f96a26ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Add Kconfig option `SOC_INTEL_ALDERLAKE_S3` which will adjust
the ACPI to not offer D3Cold when using S3.
This patch is the Alder Lake equivalent of CB:59024.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I04df8e106f9d53337b9eb5d2b9041b44a0e36684
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Both APL and GLK have 3 Heci devices.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I7dc7afb4d2906838a478083b466b36aa78ec49a8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Support up to 10 PCIe source clock out, including source clock out 7, 8, 9.
This allows boards to use source clock 7, 8, 9.
BUG=b:233252409
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.corp-partner.google.com>
Change-Id: I0296974fb8557de1edea7f9ca2d96db0afd8a743
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63943
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
1. add timeout for root port detection and pass to FSP.
2. add 'slot implemented' flag and pass to FSP.
3. PcieRpSlotImplemented needs to be set when the root port is set to
hotplug. There is an assertion in FSP checking this.
4. PcieRpSlotImplemented is updated only when it is built-in as it is
default to slot implemented in FSP.
BRANCH=firmware-brya-14505.B
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I13feb1d2d67eaba634a3e700685132fba39e1525
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Create new variant of Brya "ghost4adl".
Memory config and device tree was sourced from the schematics
(revision 7670d041f40279b5126990f20ec8f90c0538440c).
GPIO overrides have not been added yet. This is to be added in a
follow-on CL.
BUG=b:234626939
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=ghost4adl emerge-brya chromeos-bootimage
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I43c663d700ce8b53248fe203f0becc52610ddb70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Override the type-C USB2 port setting from `USB2_PORT_TYPE_C` to `USB2_PORT_MAX_TYPE_C`.
The change is required to detect USB2 device on type-C port of Agah boards.
BUG=b:233554817
TEST=build and test USB2 hub could be detected on both the Type-C ports.
=================================================================
usb 3-3: New USB device found,idVendor=1a40,idProduct=0801,bcdDevice= 1.00
usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-3: Product: USB 2.0 Hub
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
=================================================================
Change-Id: I856402aa128db0c4ba092e1c2a66e29bc9165c40
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64988
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add craaskbowl supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K3LKBKB0BM-MGCP
2. Hynix H9JCNNNCP3MLYR-N6E
BUG=b:235134420
TEST=Use part_id_gen to generate related settings
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I5f6d1b1b988468d0918df20a34a3145af30a65d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64858
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a mem_parts_used.txt, generate Makefile.inc and
dram_id.generated.txt for this part.
DRAM Part Name ID to assign
MT62F1G32D4DR-031 WT:B 0 (0000)
MT62F512M32D2DR-031 WT:B 1 (0001)
H9JCNNNBK3MLYR-N6E 1 (0001)
H9JCNNNCP3MLYR-N6E 0 (0000)
K3LKBKB0BM-MGCP 2 (0010)
K3LKLKL0EM-MGCN 3 (0011)
H58G56AK6BX069 2 (0010)
BUG=b:233830713
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: If9f2b65717a05576fa6b4fb1f53133902ff1a7c6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64982
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I607205a0d44c71eb26031ced7a8af303efacd6f2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add commonlib/bsd/elog dependency in libpayload. This will allow other
payloads (e.g. depthcharge) to implement their own eventlog read and
write utilities.
Also include commonlib/bsd/elog.c source to libc-srcs. This ensure
payloads could utilize commonlib elog helper functions.
Change-Id: I64d0fdd2a8eff1d89a1ac451d37b61787b5564e7
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: Iae3343e66906a8123b3d8de2b67948f286e4ad32
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: I8a0f18d37c065827a0f5b54f24ea1fcde497c504
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: Id600bcb3fad35455adffe11a8105ad2590e83feb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: Idfc08803946cc2d4537db4be8d1bc07e48aa6fed
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: I63b8b8a086e2c5ede765855b3c803206edf87690
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: I19835510b89cd243277f0c9701209c81bdf6ea29
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: Ib8719143a5a217173b34931e9c0ef02e9895d0a5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLessEqual(a, b)` with `a <= b`.
Change-Id: Ib4e81ea95c6fda0e8f8640671db5ce56f3a1b474
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: I04f3cc2dbba59d732c9c52a4b90a32481f9da337
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: Ib34dc8d84815d0885f30b3ea8ceb2fb95a833d50
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ib96cf05f575a2868b2ad0c00fd5486d6e2c5d90a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: I86a11ab5d2667661af3491174001001e644083e3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: If83d7fe29d112ba0ed0f72798f2b5436ecf0a6a2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ief1fe60116645d0cdad9e7ac600bc1062b54b40d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: Ic58e22046aa13549747692f4b21184cf573aa4d3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: I99cc4cf08ad74f2cb84e0ad16e615e03bbf388af
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Divide (a, b, , c)` with `c = a / b`.
Change-Id: I9b8262396755197dfbe044e3dc6a6a75c903f093
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I6732fd876524feab924a58434bec381dcdb87bce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: Ied407753ee3bb024c8c0350c45312c337ac799e5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Ic04ce82fbfd36bbd2e0cfda1a92ca0a18e1fcd73
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: I81e976de964f6ae3528884debaf2b24ddf8ed28a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: Id61c537cc91edbd407fb6429eb4dd2bc8bc7f123
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `Multiply (a, b, c)` with `c = a * b`.
Change-Id: Idc24216209bbfe73ef4197d4b8101f0d7e5891f7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: I5c16893b9c98f36fd2c210ed301c2ebb65f95368
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: Id7975a8cad4078a523de2466919982ad540f5dd3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: I61ef7b53e851f4c2367cba43ff76b200e9490ad2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreater(a, b)` with `a > b`.
Change-Id: If482b2ad4ba7d4ed1ca8c0695690ede153ed1e2a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LGreaterEqual(a, b)` with `a >= b`.
Change-Id: I56e8fdb2503a84ded2bcf183402602579c3f2997
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: I493d686fb122fb47f0b4dcf34e3635518770f97f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Change-Id: Iaa99d9dc4cf12a7431be1610d339cf78116f8bea
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I033f73e6552746c6899e46ee4d619ab47cb3d55b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: I24cf4fd70e887c14006975f494be63c34f8a75e6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: I9344e34058a1dd8b951d273e53e3c229a0ec07b4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: I3833a3a341bd64191cc0b811ca80e96a359307a1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLess(a, b)` with `a < b`.
Change-Id: I407d061ac7664d4910b8759fd1a72eab133b6e22
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LEqual(a, b)` with `a == b`.
Change-Id: Ia09c54465af47f5779917ed71bb3ea148864dfd1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LNotEqual(a, b)` with `a != b`.
Change-Id: I2e0c5961fcc90c97666f49837a71f6c0bdc429b3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Replace `LLessEqual(a, b)` with `a <= b`.
Change-Id: I256e56841e1c7037fe8ba5e9a963ad2301092325
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
