summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-02-09arch/x86/include/cpu: introduce CPU_TABLE_END CPU table terminatorFelix Held
Instead of having a magic entry in the CPU device ID table list to tell find_cpu_driver that it has reached the end of the list, introduce and use CPU_TABLE_END. Since the vendor entry in the CPU device ID struct is compared against X86_VENDOR_INVALID which is 0, use X86_VENDOR_INVALID instead of the 0 in the CPU_TABLE_END definition. TEST=Timeless build for Mandolin results in identical image. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: I0cae6d65b2265cf5ebf90fe1a9d885d0c489eb92 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72888 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-09src/acpi: add function gen: if_lgreater_ and namestr assignmentCliff Huang
1. add functions to generate if greater than conditions: acpigen_write_if_lgreater_op_op: if (op1 > op2) acpigen_write_if_lgreater_op_int: if (op > val) acpigen_write_if_lgreater_namestr_int: if (namestr > val) 2. add function to assignal value to a namestr acpigen_write_store_namestr_to_op: namestr = val TEST=Use above functions and check the generated SSDT table after OS boot. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Iffe1b23362a7ab58bdc2aa8daf45cd6f086ee818 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72825 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-09src/soc/intel/common/block/pcie/rtd3: Fix root port _STA logicCliff Huang
When enable_gpio is used as active low output, the _STA returns incorrect value. Also, simply the logic for _STA method. When enable pin is used for _STA: | polarity | tx value| get_tx_gpio() | State | | active high | 0 | 0 | 0 | | active high | 1 | 1(active) | 1 | | active low | 0 | 1(active) | 1 | | active low | 1 | 0 | 0 | When reset pin is used for _STA: | polarity | tx value| get_tx_gpio() | State | | active high | 0 | 0 | 1 | | active high | 1 | 1(active) | 0 | | active low | 0 | 1(active) | 0 | | active low | 1 | 0 | 1 | Generated _STA method: Ex: for using active low power enable GPIO pin GPPC_H17: Method (_STA, 0, NotSerialized) // _STA: Status { Local0 = \_SB.PCI0.GTXS (0x5C) Local0 ^= One Return (Local0) } TEST=Check the SSDT when booted to OS. Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: Ie6f1e7a5b3e9fd0ea00e1e5b54058a14c6e9e09e Reviewed-on: https://review.coreboot.org/c/coreboot/+/72421 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-09MAINTAINERS: Add Nicholas Chin for Dell Latitude E6400 related pathsNicholas Chin
This includes mb/dell/e6400 and ec/dell/mec5035, the latter being the EC on the E6400. Also link to my repo containing research and documentation I wrote for the MEC5035. Change-Id: I5b521e6b1fce5b076be6f0392d99aafac35b0084 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-09mb/dell: Add Latitude E6400Nicholas Chin
Mainboard name is Compal JBL00. This is based on the GM45/ICH9M chipset and uses DDR2 RAM. The EC is a SMSC MEC5035 which has internal flash, so there's no issue about making sure to include the EC firmware in the BIOS region. This only supports the variant with integrated graphics only, the version with a discrete Nvidia Quadro NVS 160M is not supported. This port was based on the Lenovo T400 port. Working: - USB EHCI debug (lower USB port on right side) - Keyboard - Touchpad/trackpoint - VGA - Displayport - ExpressCard - Audio - Ethernet - mPCIe WiFi - mPCIe Bluetooth (uses USB) Not working: - Brightness hotkeys - Physical Wireless switch - SD card slot: Linux outputs an "irq 18: nobody cared" message when inserting a card, after which it disables the IRQ Unknown/untested: - Dock - Smartcard (slot and contactless) - Firewire - eSATA - TPM - Battery (my battery is at the end of its lifespan) Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Change-Id: I516ebbf4390a3f6d242050da8d35dc267b8b3a28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-09spd/lp5: Add new part H58G66BK8BX067Jamie Chen
Micron H58G66BK8BX067 will be used for omnigul. Add it to the parts list and regenerate the SPDs using spd_gen. BUG=b:264340545 TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5 Change-Id: Ida422b17d7abfd130a80a28e49a1fa1b70043adf Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72885 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-09amdfwtool: Parse the line with SOC_NAMEZheng Bao
We need to put soc name to fw.cfg for future combo feature. We skip for now when SOC_NAME is found. 1/5 of split changes https://review.coreboot.org/c/coreboot/+/58552/28 Change-Id: I2b8d7154d22db13675ff57b6abe61c747604c524 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-09amdfwtool: Add SOC family definition for CarrizoZheng Bao
For Carrizo, the soc name was set as UNKNOWN. The change is supposed to be binary unmodified, except the SPI settings. According to the spec, the Stoneyridge and Carrizo have the same definition of SPI setting in EFS. Change-Id: I9704a44773b2f541f650451ed883a51e2939e12a Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66823 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-09amdfwtool: Allow the location to be a relative addressZheng Bao
When the BIOS size is more than 32M, the physical address of EFS header will be complicated, like 0xfe020000 or 0xfc020000. So we make it simpler to allow to use relative address. This CL works with https://review.coreboot.org/c/coreboot/+/69852 TEST=Result image is binary same on amd/birman amd/majolica amd/gardina amd/mandolin Change-Id: I4308ec9ea05a87329aba0b409508c79ebf42325c Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-09treewide: Remove repeated wordsElyes Haouas
Found by linter Change-Id: I7a49cce0b56cf83d0e4490733f9190284a314c4a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-09soc/amd/picasso/soc_util.c: Remove unneeded "break"Elyes Haouas
"break" is useless after "return". Change-Id: I84bc506a3d50e937797f42659299bf90ce392e09 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-09soc/intel/common/block/gpio/gpio.c: Remove unnecessary line continuationElyes Haouas
Also remove unnecessary whitespace before "\n" Change-Id: Ia2c8fcb82658ed3e247759535d3112270d46e65d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-09console: Add SimNow console loggingFred Reitberger
The AMD SimNow tool supports fast logging through an IO port. Add a new console to support SimNow logging through port 80. TEST=observe significant speed improvements on SimNow console log Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I42a431f48ea14ba4adacbd4a32e15abe7c5e4951 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-09mb/google/geralt: Add power-on sequence for BOE_TV110C9M_LL0Rex-BC Chen
For Geralt, we use BOE_TV110C9M_LL0 as MIPI firmware display, so add the power-on sequence for BOE_TV110C9M_LL0. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I3ef0b2e26d8cc0dc35c2985363ee4c3557dac8a9 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72749 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-09mb/google/geralt: Init MT6359P only once in ramstageLiju-Clr Chen
The regulator MT6359P is needed by both firmware display and SD card. To avoid duplicate initialization in ramstage, publicize init_pmif_arb() as mt6359p_init_pmif_arb() and call it from mainboard_init(). This would save 13 ms for boot time on Geralt. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I29498d186ba5665ae20e84985174fc10f8d4accd Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72839 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09soc/intel/meteorlake: Remove unsupported hybrid_storage_mode configSridhar Siricilla
The patch removes hybrid_storage_mode variable from soc_intel_meteorlake_config struct since hybrid storage is no longer supported on Meteor Lake platform. TEST=Verify the build for Rex board Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I40ec3775b827ab6e1ebd4778c6c8e13eac1944e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/google/herobrine: Enable early eMMC init in corebootShelley Chen
Move eMMC init from depthcharge into coreboot to remove it from the critical boot path. Doing so saves us almost 35ms on villager: before change: finished storage device initialization 50,783 after change: finished storage device initialization 16,255 BUG=b:254092907,b:218406702 BRANCH=None TEST=flash new FW onto villager and make sure can boot from eMMC Change-Id: I1af1ec162029120332e7f531f75c3780266d322b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/intel/emeraldlake2: Remove unused VBOOT optionYu-Ping Wu
Remove the commented VBOOT_VBNV_CMOS Kconfig option as well as VBOOT for emeraldlake2. BUG=b:235293589 TEST=none Change-Id: Ie583dcf615573784c657b9d220ad417b05704150 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/hp/z220_series: Enable VBOOT_VBNV_FLASHYu-Ping Wu
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with VBOOT_VBNV_FLASH for z220_series. [1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1 BUG=b:235293589 TEST=./util/abuild/abuild -t HP_Z220_CMT_WORKSTATION -a \ # with VBOOT enabled and a custom FMDFILE with RW_NVRAM region Change-Id: I1c60a44fb12fd093f45cf54ef2f9e0e02afc80bd Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09Revert "device: Add Kconfig options for D3COLD_SUPPORT and NO_S0IX_SUPPORT"Felix Singer
This reverts commit d6e04aa00bc5a8912a041a569eb57f6962d1119a. Reason for revert: Breaks master. Change-Id: If7daeaaffe3f9ae9f5e2fbecef5817b9b62827d3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72917 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-02-09mb/google/dedede/var/dibbi: Update gpio tableAmanda Huang
Config GPP_B9 as LAN_CLKREQ_ODL based on latest schematic BUG=265021899 BRANCH=dedede TEST=emerge-dedede coreboot Change-Id: Ia099bd64364b46240e0426aa57dfe8d230e7494d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Liam Flaherty <liamflaherty@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/google/brya/var/omnigul: Add SOC I2C configJamie Chen
Add SoC config and .early_init = 1 in I2C1 BUG=b:263060849 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I661bdee6c7b9e6ea4cd0ab2006967d7c7ddd0f67 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72872 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-02-09mb/google/brya/var/omnigul: Modify NVMe and UFS Storage supportJamie Chen
1. Add fw_config:STORAGE_UFS & STORAGE_NVME to switch storage. 2. rp11 off change to on. BUG:b:263846075 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I35c02ac9cbb8442d7b4aae57f6c7b576b2b5f77b Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72090 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/google/skyrim/var/markarth: Override SPI flash bus speedJohn Su
Add configuration to bump up the SPI flash bus speed from 66 MHz to 100 MHz for starting next phase. BUG=b:267539952 TEST=None Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Id46201351780bb5bc05422ff36dad6972285690e Reviewed-on: https://review.coreboot.org/c/coreboot/+/72870 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Chao Gui <chaogui@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-02-09mb/google/brya: Create aurash variantZoey Wu
Create the aurash variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:263691099 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_AURASH Change-Id: I595102778071f822c5cf69ceadeed174e5ea4836 Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72837 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08device: Add Kconfig options for D3COLD_SUPPORT and NO_S0IX_SUPPORTSean Rhodes
Add NO_S0IX_SUPPORT for boards that do not support, or do not want to support S0IX. As all the boards in the tree that do this, don't support D3Cold, add D3COLD_SUPPORT that defaults to `n` when NO_S0IX_SUPPORT is selected to disable D3Cold support. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I04abc7efe2db06ae6daba9e09835441b62ee44f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-08ec/dell: Add support for the SMSC MEC5035Nicholas Chin
This is required to prevent the EC from shutting down the system after about 15 seconds after being turned on. If the EC doesn't receive a command meaning "CPU OK" it assumes that the processor has failed and flashes a diagnostic code on the keyboard LEDs to indicate this. This also enables the keyboard and trackpad/trackpoint interfaces. Parts of this code were derived from yet-to-be merged code in CB:44975 (ec: Add support for MEC5055 for Dell laptops) written by Iru Cai. Tested on a Dell Latitude E6400 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Change-Id: Ia420cd51e9a64be5eee4af2c0d113618575522b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59703 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08ec/google/chromeec: Update ec_commands.hCaveh Jalali
Update ec_commands.h from the EC repo at: "8b6f7de2a7 fan: update fan stalled value reporting" This is an exact copy of the EC repo's ec_commands.h with the exception of updating the copyright message. BUG=b:258110734 BRANCH=none TEST=built coreboot for brya Change-Id: I4ce15e1af40cc54a6cf2ebd6f5d5adf8953dee60 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08ec/google/chromeec: clang-format ec_commands.hCaveh Jalali
This is a format-only change: Reformat ec_commands.h using clang-format according to the EC repo's current formatting style. The command is: clang-format --style=file:$EC/.clang-format -i ec_commands.h where $EC points to the chromeos EC repo. The EC repo has recently adpoted the practice of formatting all files through clang-format using its own style. So, run ec_commands.h through the EC's clang-format so future updates don't get overwhelmed by inconsequential style changes. BUG=b:258110734 BRANCH=none TEST=built coreboot for brya Change-Id: Icbd6d00922dc5fd4c44ee109d54cea612e15db06 Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08util/testing: Allow scanbuild test to be skippedMartin Roth
This is currently killing the jenkins builds. This patch allows it to be disabled until the reason is found. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I16dba80a88953aa95f7f647ba12b2ec3297ab81f Reviewed-on: https://review.coreboot.org/c/coreboot/+/72801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-08drivers/ocp, mb/ocp/deltalake: move get_loglevel_from_vpd functionJohnny Lin
Move get_loglevel_from_vpd from mb/ocp/deltalake to driver drivers/ocp/vpd/loglevel_vpd.c. Change-Id: I70af1051f63c527fd8150f5ecbe4765b4aaacd20 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71936 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-08mb/intel/mtlrvp: Enable PCIE Advanced Error ReportingHarsha B R
This patch enables PCI Express Advanced Error Reporting Capability for WWAN, WLAN, and SSD root ports. On enabling PCIE_RP_AER, PCIE device will automatically report (if any error) about the error nature to the corresponding PCIe root port. BUG=b:224325352 BRANCH=None TEST=Build and boot mtlrvp to ChromeOS. Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Iab8619818e2219b41287b895513eb04b0464401e Reviewed-on: https://review.coreboot.org/c/coreboot/+/72874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-02-08soc/qualcomm/sc7280: init eMMCShelley Chen
Use common sdhci driver in coreboot to initialize eMMC for sc7280. This should allow us to initialize eMMC earlier in the boot process, taking it out of the critical path. BUG=b:254092907 BRANCH=None TEST=emerge-herobrine coreboot chromeos-bootimage Change-Id: Ifa88da500e82b44d7523f2e68763e01399c89f4d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71829 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/qualcomm/common: Add sdhci_msm_init functionShelley Chen
Porting from depthcharge changes for supporting eMMC driver functionality with standard SDHC controller on Qualcomm chipsets. sdhci_msm_init() needs to be run before the standard sdhci_mem_controller initiailzation. BUG=b:254092907 BRANCH=None TEST=emerge-herobrine coreboot Change-Id: I6f4fd1360af1082b335f9cc3046871ce9963b5d0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72634 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08commonlib/storage: Add attach callback to sdhci_ctrlrShelley Chen
Adding a attach callback function pointer in case a platform needs to execute anything before the standard initialization of the sdhci mem controller. BUG=b:254092907 BRANCH=None TEST=emerge-herobrine coreboot Change-Id: I0f37ec09d083922cad5ecd3c47b184cf3311fe2d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2023-02-08soc/amd: use CPUID_FROM_FMS macro instead of magic numbersFelix Held
Port over the remaining AMD SoCs to use CPUID_FROM_FMS. The Glinda CPUID still needs to be updated to the actual CPUID, but for now just change it to use CPUID_FROM_FMS. TEST=Resulting image of timeless build for Gardenia (Stoneyridge), Majolica (Cezanne), Chausie (Mendocino), Mayan (Phoenix) and Birman (Glinda) don't change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia508f857d06f3c15e3ac9f813302471348ce3d89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72862 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/phoenix/soc_util: add get_soc_typeFelix Held
Implement a get_soc_type function to determine if the silicon the code is running on is Phoenix or Phoenix 2. This will for example be needed to provide the correct DXIO descriptor table for the SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5f2b668b83432426b04e7f1354b694ddd6c300d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72861 Reviewed-by: ritul guru <ritul.bits@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/picasso/soc_util: use cpuid_matchFelix Held
Now that there is a cpuid_match function, we can use it instead of doing basically the same thing manually. In the functions is_fam17_1x and is_fam17_2x both the stepping number and the lower nibble of the model number are masked out. To avoid having magic constants in the code, introduce the CPUID_ALL_STEPPINGS_AND_BASE_MODELS_MASK definition. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I758f9564c08c62c747cc4f93a8d6b540a1834a62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72860 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08arch/x86/cpu: move cpuid_match to corresponding header fileFelix Held
Since the functionality of cpuid_match is also useful outside of arch/x86/cpu.c and it's a relatively simple function, move its definition as inline function to the header file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic96746b33b01781543f60cf91904af35418e572d Reviewed-on: https://review.coreboot.org/c/coreboot/+/72859 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/google/brya: Add usb_lpm_incapable for Type-C port with PS8815Ron Lee
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815 retimer on USB U1/U2 transition. The usb_lpm_incapable config is used to disable USB U1/U2 transition for these Type-C ports. This patch add usb_lpm_incapable config for the following variants with PS8815 retimer: - kinox MLB: C0 - volmar DB: C1 - osiris MLB: C0/C1 - mithrax DB: C1 - felwinter DB: C1 - taeko DB: C1 - gimble DB: C1 - gimble4es DB: C1 - taniks DB: C1 - marasov DB: C2 - gaelin MLB: C0/C1 - skolas DB: C1 - skolas4es DB: C1 - brya0 DB: C1 BUG=b:253402457 TEST=Plug in device and check LPM sysfs nodes are disabled localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u1 disabled localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u2 disabled Change-Id: Ie9246ff7908887404f49ec10ee781c8cba410557 Signed-off-by: Ron Lee <ron.lee@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-02-08mb/google/geralt: Add support for VM18 in regulator.cSen Chu
Add regulator VM18 support to supply power for BOE_TV110C9M_LL0. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: I13bafbe10a18a18e253575fd107c9b415f28ef01 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72748 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/mediatek: Add support for regulator VM18Sen Chu
To provide power to MIPI panel BOE_TV110C9M_LL0, add support for regulator VM18. BUG=b:244208960 TEST=test firmware display pass for BOE_TV110C9M_LL0 on Geralt. Change-Id: Ib8c3b2df1157b23b37492b1e9b1716903ea67799 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72747 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08soc/mediatek: Remove unnecessary !! for boolean variableLiju-Clr Chen
Enable is already a boolean, so the !! is not needed. BUG=None TEST=build pass. Change-Id: I25a7cec632f21a258b8364c82e25b59e55ab7453 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72869 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08mb/google/corsola: Use function to get regulator IDsLiju-Clr Chen
There might be inconsistence between regulator_id[] and `enum mtk_regulator` when we need to add new regulator IDs for Geralt. Therefore, we implement get_mt6366_regulator_id() to get regulator IDs. BUG=None TEST=build pass. Change-Id: I3d28ebf2affe4e9464b1a7c1fb2bbb9e31d64a5e Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72838 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-02-08soc/amd/picasso: use CPUID_FROM_FMS macro instead of magic numbersFelix Held
TEST=Resulting image of timeless build for Mandolin doesn't change. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I44cb7759206e9e1ce79fd57f62b9a844e52f7394 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72857 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08arch/x86/include/cpu: introduce CPUID_FROM_FMS macroFelix Held
Introduce a macro to get the raw CPUID leaf 1 EAX value from a given set of CPU family, model and stepping. The processor type in bits 12 and 13 is assumed to be always be zero; at least this is the case for all CPUIDs that are currently in the coreboot tree. This can be used to make the device values in the CPU device ID tables easier to read. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idab77453712b14983b1d02ca365f7924239fc2bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/72856 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/stoneyridge/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all family 15h model 60h and 70h steppings. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id05f849d59c04efa9f38dd66892f3cb99d94e3ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/72855 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08cpu/intel/model_206ax/model_206ax_init: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK to only need one CPU device ID table entry per family & model combination and not one per stepping. TEST=Thinkpad x230 with Ivy Bridge stepping 9 CPU still boots with this patch applied. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I46020d5b1b1fba8449c3823fac1369e5670d91c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72854 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08soc/amd/phoenix/include/cpu: add Phoenix CPUIDFelix Held
There are multiple Phoenix steppings, but that is now covered by using CPUID_ALL_STEPPINGS_MASK. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id4eb3502dec5ebdfdbba263b15b34621952d0554 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72853 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/glinda/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Glinda steppings once GLINDA_A0_CPUID is updated. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic9b8cbb2dc925a8258db6a4eb0d1b00b2745637f Reviewed-on: https://review.coreboot.org/c/coreboot/+/72852 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/phoenix/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Phoenix 2 steppings that might be available in the future. Right now it shouldn't change any behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If9878b4687360250cac4cfe1409d5dbad7147cf3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72851 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/mendocino/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Mendocino steppings that might be available in the future. Right now it shouldn't change any behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I77ea8c6162667e0a318176e62078b1f57726c10c Reviewed-on: https://review.coreboot.org/c/coreboot/+/72850 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/cezanne: use CPUID_ALL_STEPPINGS_MASK to support all steppingsFelix Held
Use CPUID_ALL_STEPPINGS_MASK as CPUID match mask to support all Cezanne steppings. This adds support for Cezanne stepping A1 and possible future steppings. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idb020052685d9369109f391797fdd8f8790a91d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72849 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08soc/amd/picasso/cpu: use CPUID_ALL_STEPPINGS_MASKFelix Held
Use CPUID_ALL_STEPPINGS_MASK to only need one CPU device ID table entry per family & model combination and not one per stepping. TEST=Mandolin with a Picasso APU with PICASSO_B1_CPUID (0x00810f81) still finished mpinit and boots successfully even though now only PICASSO_B0_CPUID (0x00810f80) with CPUID_ALL_STEPPINGS_MASK specified as device match mask. When commenting out the line with PICASSO_B0_CPUID as a negative test, mpinit fails as expected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I00ba43834ad86ecffa09d60599b17d122acd0b99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72848 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08arch/x86/cpu: introduce and use device_match_maskFelix Held
Instead of always doing exact matches between the CPUID read in identify_cpu and the device entries of the CPU device ID table, offer the possibility to use a bit mask in the CPUID matching. This allows covering all steppings of a CPU family/model with one entry and avoids that case of a missing new stepping causing the CPUs not being properly initialized. Some of the CPU device ID tables can now be deduplicated using the CPUID_ALL_STEPPINGS_MASK define, but that's outside of the scope of this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0540b514ca42591c0d3468307a82b5612585f614 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72847 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08arch/x86/include/cpu: retype device field in cpu_device_idFelix Held
Use a more specific type in preparation for using bit masks on this field in the next patch. Since uint32_t is a typedef of unsigned int, this won't change behavior. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic54f73dcd3496a5ad85291b9b9586bc740b734d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72846 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-02-08soc/intel/{tgl,adl}/acpi: Unify the way D3Cold is enabledSean Rhodes
Both Alder Lake and Tiger Lake have Kconfig options for S3, which disables support for D3Cold. Unify these so that they are easier to compare. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I6eaba99e5483053a91ca20df2b7788edac5d65b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72798 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/amd/mayan: update EC FW offset in spiromRitul Guru
update EC FW offset location in spirom to 0x81000 For mayan board EC FW is located at offset 0x81000 location, 0th location contains pointer to this EC FW location. Change-Id: I63c797e12ed131e8411c11379f4db9bcc29b49a2 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/common/data_fabric: print decoded control register contentsFelix Held
Since all SoCs define the df_mmio_control union for the bits used in the code, data_fabric_print_mmio_conf can take advantage of that and also print a decoded version of those bits. Output on Mandolin before the patch: === Data Fabric MMIO configuration registers === idx control base limit 0 93 fc000000 febfffff 1 93 10000000000 ffffffffffff 2 93 d0000000 f7ffffff 3 1093 fed00000 fedfffff 4 90 0 ffff 5 90 0 ffff 6 90 0 ffff 7 90 0 ffff Output on Mandolin with the patch: === Data Fabric MMIO configuration registers === idx base limit control R W NP F-ID 0 fc000000 febfffff 93 x x 9 1 10000000000 ffffffffffff 93 x x 9 2 d0000000 f7ffffff 93 x x 9 3 fed00000 fedfffff 1093 x x x 9 4 0 ffff 90 9 5 0 ffff 90 9 6 0 ffff 90 9 7 0 ffff 90 9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I06e1d3a3e9abd664f59f2bb852394e7f723f2b30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/mendocino/data_fabric: add Rembrandt DF_MMIO_REG_SET_SIZEFelix Held
In contrast to Mendocino and all other AMD SoCs in the coreboot tree, Rembrandt, on which Mendocino is based on, has a DF_MMIO_REG_SET_SIZE of 3 instead of 4, so the next data fabric MMIO register is 3 DWORDs after the last one instead of the 4 DWORDs on the other SoCs. This was checked against PPR #56558 Rev 3.04. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I454ad5d182f0040db93c9b3a83941333392c6061 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/*/data_fabric: introduce and use DF_MMIO_REG_SET_SIZEFelix Held
To be able to handle a special case, add a per-SoC define for DF_MMIO_REG_SET_SIZE instead of having this hard-coded as 4 in the DF_MMIO_* macros. To avoid some duplication, also introduce the DF_MMIO_REG_OFFSET macro. TEST=Output from data_fabric_print_mmio_conf doesn't change on Mandolin. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I67420a2973c8ef9a7f0ce19ddc0013de69731689 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/common/data_fabric: replace NB with DF prefix for DF registersFelix Held
Since the MMIO decode range registers in the data fabric are part of the data fabric and not of the northbridge, replace the NB prefix with a DF prefix to make this a bit clearer. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ife5e4581752825e9224b50252955d485a067af74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/*/data_fabric: rename define for MMIO decode register set countFelix Held
This should make it a bit clearer that those registers are in the data fabric configuration registers. Also move those defines right after the register definition those are related to. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic107bd217f4af0a9ddfbe41aafd3c882aa968e22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08amdfwtool: Report the address of EFS header and bodyZheng Bao
The address mode is an internal mode which AMD FWs use. Regular developers don't have to know that. Just report the relative address every time. For the cases head and body are split, the address of body is also reported. Change-Id: I77d9aac0b3d996363341c1d2dae049ec344b39aa Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-08soc/amd/phoenix/include/cpu: rename CPUID define to match CPU modelFelix Held
CPUID 0x00a70f80 is Phoenix 2 and not Phoenix, so update the define name to match. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie7500130d5470fdd824980b81746f3a0f6d277d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72843 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: ritul guru <ritul.bits@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-02-08docs/contrib/gsoc: Move org admins to dedicated sectionFelix Singer
Add a dedicated section for the organization admins and explain their role. Also, add a reference to a GSoC page mentioning various tips for organization admins. Change-Id: I6c84a80dabf516b2042af018f091204f0f853361 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2023-02-08mb/intel/mtlrvp: Add ACPI configuration for USB2/3 portsHarsha B R
This patch adds ACPI configuration for USB2/3 ports for mtlrvp as per schematics. This helps in generating corresponding ACPI code at runtime that includes port information. BUG=b:224325352 BRANCH=None TEST=Able to build and boot MTLRVP. Connect USB device and check if corresponding enumeration of USB device (14.0) is observed on executing lspci. 00:14.0 USB controller: Intel Corporation Device 7e7d (rev 01) 00:14.1 USB controller: Intel Corporation Device 7e7e (rev 01) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ie150247661322e3944be15dc70f66033266d8aac Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72787 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/intel/mtlrvp: Describe mainboard configuration for BB RetimerHarsha B R
This patch describes BB retimer for tcss_dma0 and tcss_dma1 with respect to GPP_B21 as per schematics. +--------------+------------+ | tbt_pcie_rp0 | tcss_dma0 | +--------------+------------+ | tbt_pcie_rp1 | tcss_dma0 | +--------------+------------+ | tbt_pcie_rp2 | tcss_dma1 | +--------------+------------+ | tbt_pcie_rp3 | tcss_dma1 | +--------------+------------+ BUG=b:224325352 BRANCH=None TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration of tbt_pcie_rp as part of lspci. 00:07.0 PCI bridge: Intel Corporation Device 7ec4 00:07.1 PCI bridge: Intel Corporation Device 7ec5 00:07.2 PCI bridge: Intel Corporation Device 7ec6 00:07.3 PCI bridge: Intel Corporation Device 7ec7 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ie1a0026b064aa4f7fcd27e75c0b0d052ec620dcc Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72786 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/intel/mtlrvp: Describe TCSS USB portsHarsha B R
This patch describes the TCSS USB ports for mtlrvp as per schematics. This patch describes TCSS ports for UPC_TYPE_C_USB2_SS_SWITCH as below, tcss_usb3_port1: USB3 Type-C Port C0 tcss_usb3_port2: USB3 Type-C Port C1 tcss_usb3_port3: USB3 Type-C Port C2 tcss_usb3_port4: USB3 Type-C Port C3 BUG=b:224325352 BRANCH=None TEST=Able to build and boot MTLRVP to ChromeOS. Verify the enumeration of xhci (0d.0) as part of lspci. Also verify the enumeration of Type-C ports as part of cbmem -c. Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I0054ac4e3d1d9b97cfea615831ec8f3d3e00c9e0 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72785 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/intel/mtlrvp: Enable WWAN ACPIHarsha B R
This patch enables FM350GL 5G WWAN support for mtlrvp. BUG=b:224325352 BRANCH=None TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module 00:1c.6 is enumerated as part of lspci and cbmem -c in AP console. Also verify generation of PXSX Device as part of SSDT. Able to connect WiFi and access internet. cbmem -c: \_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3) \_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL) SSDT: Scope (\_SB.PCI0.RP07) { Device (PXSX) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I870cc0782fb989f1bdbe369a4a12630a62729d8e Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72779 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-02-08acpi/acpigen.h: Fix EVENT_OP valueElyes Haouas
Fix EVENT_OP value according to ACPI specs: https://uefi.org/specs/ACPI/6.5/20_AML_Specification.html?highlight=aml%20byte%20stream%20byte%20values#aml-byte-stream-byte-values Change-Id: I8c531e95f4fc741926bc883d869816f534ff3b7f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-08arch/arm64/armv8/mmu.c: Add a space before the ternary operatorYuchen He
Coding style requires a space before the question mark in ternary operators. Fix that. Found by the linter. Signed-off-by: Yuchen He <yuchenhe126@gmail.com> Change-Id: I894d6efd5673e9ad5f166ae59967a8d4bb42fb06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72484 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/samsung: Enable VBOOT_VBNV_FLASHYu-Ping Wu
To deprecate VBOOT_VBNV_CMOS [1], replace VBOOT_VBNV_CMOS with VBOOT_VBNV_FLASH for samsung boards lumpy and stumpy. 0x8000 unused flash space is allocated for RW_NVRAM. Previously BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES was selected for CPU_INTEL_HASWELL, CPU_INTEL_MODEL_{2065X,206AX} and others (see [2]). However, there seems to be no particular reason on those platforms. We've dropped the config for haswell. Now drop it for CPU_INTEL_MODEL_{2065X,206AX}, so that VBOOT_VBNV_FLASH can be enabled. [1] https://web.archive.org/web/20230115020833/https://issuetracker.google.com/issues/235293589?pli=1 [2] commit 6c2568f4f58b9a1b209c9af36d7f980fde784f08 ("drivers/spi: Add BOOT_DEVICE_SPI_FLASH_NO_EARLY_WRITES config") BUG=b:235293589 TEST=./util/abuild/abuild -a -t SAMSUNG_LUMPY -x Change-Id: I833edd4f7a328b21e81c971ba8a9aec0aad7d3d3 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2023-02-07util/abuild: Add flags to allow abuild to skip boardsMartin Roth
This change adds 2 command line parameters, --skip_set and --skip_unset that allows abuild to skip boards with particular Kconfig values either set or not set. Note that it only works on BOOL type variables. This can be set on the abuild command line, or the JENKINS_ABUILD_OPT= variable on the make command line. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I43336484cf25f83065ec7facf45c123d831024b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-02-07soc/amd/stoneyridge/acpi: use acpigen_write_processor_deviceFelix Held
Since things are done a bit differently on Stoneyridge, it's probably safer to run a test instead of assuming that the test on Picasso was sufficient to be reasonably sure that this will also work as expected on Stoneyridge. TEST=No change of ACPI-related messages in dmesg with this patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I432752fae8be08d3cbd7d30215b350c4528c7206 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-07mb/google/brya: Create constitution variantMorris Hsu
Create the constitution variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:267539938 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_CONSTITUTION Change-Id: Idb6089561d3aa5aac4448f9d46347c731f027e9c Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72730 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07bsd/cb_err: Add error code for UEFI variable storePatrick Rudolph
Add a new set of errors that will be used by the introduced EFI non-volatile variable store in flash. Change-Id: I6baea9fb138d1a2755d22a3d587105793adb9c90 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61960 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-02-07acpi/acpigen.c: Add a comment to deprecate acpigen_write_processor()Elyes Haouas
ACPI Revision 6.0 deprecates Processor keyword, so use acpigen_write_processor_device() instead. Change-Id: I31626f4e323dd9053a63c0f5e89d1685103e4bd4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-07soc/intel/alderlake: Remove unused S0IX variableSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I85fc5dabf10c6df7f11fd1defe8a39afc9f95325 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72797 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07soc/amd/common/data_fabric_helper: normalize addresses in debug printFelix Held
Instead of just printing the register contents, normalize the contents of the base and limit registers to actual MMIO addresses and then print those. This will hopefully avoid some confusion caused by the shifted addresses. Output on Mandolin before the patch: === Data Fabric MMIO configuration registers === Addresses are shifted to the right by 16 bits. idx control base limit 0 93 fc00 febf 1 93 1000000 ffffffff 2 93 d000 f7ff 3 1093 fed0 fedf 4 90 0 0 5 90 0 0 6 90 0 0 7 90 0 0 Output on Mandolin after the patch: === Data Fabric MMIO configuration registers === idx control base limit 0 93 fc000000 febfffff 1 93 10000000000 ffffffffffff 2 93 d0000000 f7ffffff 3 1093 fed00000 fedfffff 4 90 0 ffff 5 90 0 ffff 6 90 0 ffff 7 90 0 ffff Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I62eeb88ddac6a7a421fccc8e433523459117976a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-02-07src: Move POST_BOOTBLOCK_CAR to common postcodes and use itMartin Roth
This moves the definition for POST_BOOTBLOCK_CAR from the intel-specific postcodes into the common postcode list, and uses it for the cache-as-RAM init as needed. Because POST_BOOTBLOCK_CAR was set to 0x20 in some spots and 0x21 in most of the others, the values were consolidated into 0x21. This will change the value on some platforms. Any conflicts should get sorted out later in the conversion process. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8527334e679a23006b77a5645f919aea76dd4926 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-02-07mb/intel/mtlrvp: Enable GSPI interfaceHarsha B R
This patch enables GSPI [1] interface for mtlrvp based on mtlrvp schematics. BUG=b:224325352 BRANCH=None TEST=Able to observe corresponding UPD configuration with FSP dump and able to boot mtlrvp (LP5/DDR5) to ChromeOS. (Base patch for CB:71223) SPI[0].Mode = 0 SPI[0].DefaultCsOutput = 0 SPI[0].CsMode = 0 SPI[0].CsState = 0 SPI[1].Mode = 1 SPI[1].DefaultCsOutput = 0 SPI[1].CsMode = 0 SPI[1].CsState = 0 Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I3d4c4f19dd80fefa80c365b5ecac0a234f5af860 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-02-07mb/intel/mtlrvp: Enable PCIe port 8 for WLANHarsha B R
This patch enables PCIe port for WLAN as per mtlrvp schematics BUG=b:224325352 BRANCH=None TEST=Build and boot mtlrvp to ChromeOS. Ensure that WLAN module gets is enumerated as part of lspci in AP console. ae:00.0 Wireless controller [0d40]: Intel Corporation XMM7360 LTE Advanced Modem (rev 01) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ief3c0eff40ced57d29ce343e569b6b392c27ad74 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72778 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07mb/intel/mtlrvp: Enable EC_GOOGLE_CHROMEEC_SWITCHESHarsha B R
This patch enables EC_GOOGLE_CHROMEEC_SWITCHES for MTL_CHROME_EC which helps in mode switch using dut-control power_state:rec. BUG=b:224325352 BRANCH=None Test=Able to build and boot MTLRVP to ChromeOS. Check if chroot command dut-control power_state:rec puts the DUT to recovery mode. Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I5de0cd6c9a50bd85238205e09976a8bd8dd7142f Reviewed-on: https://review.coreboot.org/c/coreboot/+/72813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-02-07mb/intel/mtlrvp: Enable PCIe port 7 for WWANHarsha B R
This patch enables PCIe port for WWAN as per mtlrvp schematics BUG=b:224325352 BRANCH=None TEST=Build and boot mtlrvp to ChromeOS. Ensure that WWAN module gets enumerated with cbmem -c. \_SB.PCI0.RP07: Enable RTD3 for PCI: 00:1c.6 (Intel PCIe Runtime D3) \_SB.PCI0.RP07: Enable WWAN for PCI: 00:1c.6 (Fibocom FM-350-GL) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ib372db9642a3c7b3a21a112fa0e6e0b4bc88a9ea Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72777 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-07mb/intel/mtlrvp: Enable ACPI support for Type-C portsHarsha B R
This patch adds ACPI support for Type-C ports. BUG=b:224325352 BRANCH=None Test=Able to build and boot MTLRVP. Verify SSDT for the corresponding entry, \_SB.PCI0.PMC.MUX.CON0 under Device (CON0) \_SB.PCI0.PMC.MUX.CON1 under Device (CON1) \_SB.PCI0.PMC.MUX.CON2 under Device (CON2) \_SB.PCI0.PMC.MUX.CON3 under Device (CON3) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: I8e5957ca7a6c542a64d79b2ceefbed79ead15811 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72789 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Usha P <usha.p@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-02-07tree: Drop repeated wordsAlexander Goncharov
Found-by: linter Change-Id: I7c6d0887a45fdb4b6de294770a7fdd5545a9479b Signed-off-by: Alexander Goncharov <chat@joursoir.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72795 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-06mb/google/brya/var/kano: Update ELAN TS delay time to 150msDavid Wu
ELAN updated the datasheet, the HID/I2C protocol's T3 delay time is 150ms now. Modify the kano's delay time to follow the requiremnet. BUG=b:247944006 TEST=Manually checked touchscreen works after reboot and suspend. Change-Id: I42a7737060a82c0b27717f1510b8ec64abd1465a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paz Zcharya <pazz@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-06util/docker: Add libgpiod-dev to coreboot-sdk for flashromMartin Roth
Flashrom needs libgpiod-dev to build the new bitbanging programmer driver for Linux libgpiod. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I88f7e11fab115487cc44d4b89b3eab4745ad058d Reviewed-on: https://review.coreboot.org/c/coreboot/+/72371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2023-02-06inc/device: Add extended capability ID for ATSTim Chu
Add extended capability ID for Address Translation Services. This definition can be found in PCI Express Base Specification rev6.0 9.3.7. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: I777070ea223fc7e83c510c8eadbe4e028825eef6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71929 Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-02-06amdfwtool: Add phoenix and glinda in get_psp_fw_typeZheng Bao
Change-Id: If80cc5396703cef41cc615008c9f0dac0b7bbb09 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-02-06soc/amd/glinda: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Glinda SoC, remove it form the global NVS. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I627d05c09d9637caf15e17285dd2c8e0389747c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-06soc/amd/phoenix: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Phoenix SoC, remove it form the global NVS. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I24ad0a2fbc5a973c0cb40ed10942b5efc31191aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/72186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-06soc/amd/mendocino: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Mendocino SoC, remove it form the global NVS and add an ACPI object for this in the DSDT of the mainboards that use it in their ACPI code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1ed0407826f579eb14169246b7b14ba677c20e8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/72185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-06soc/amd/cezanne: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Cezanne SoC, remove it form the global NVS and add an ACPI object for this in the DSDT of the mainboards that use it in their ACPI code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6953da5e0f1966aa3022364d9a9c72ebafc698cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/72184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-06soc/amd/picasso: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Picasso SoC, remove it form the global NVS and add an ACPI object for this in the DSDT of the mainboards that use it in their ACPI code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia265f3eebf5e48c185d2e4bf4ef74f8eab7c9606 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72183 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2023-02-06soc/amd/stoneyridge: remove LIDS field from global NVSFelix Held
Since the LIDS field is only used in the ACPI code and not in the C code of any mainboard using the Stoneyridge SoC, remove it form the global NVS and add an ACPI object for this in the DSDT of the mainboards that use it in their ACPI code. Eventually the LIDS object should probably be moved to the EC's ACPI code, but that's out of scope for this patch. TEST=google/liara doesn't show ACPI errors in Linux' dmesg Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I778c4189607035b4765c6cb8b2e74030dcf9069f Reviewed-on: https://review.coreboot.org/c/coreboot/+/72182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-02-06soc/intel/apl: Hook up cpu ops in devicetreeArthur Heymans
This simplifies the code flow of the cpu init. APL can do CPU init after calling FSP-S, while GLK needs to do that before. This is now reflected directly in the cpu ops rather than using CONFIG_SOC_INTEL_COMMON_BLOCK_CPU_MPINIT as a proxy. Change-Id: I7fd1db72ca98f0a1b8fd03a979308a7c701a8a54 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-02-06device/pci_device.c: Add way to limit max bus numbersArthur Heymans
By default this limits PCI buses to CONFIG_MMCONF_BUS_NUMBER. Some platforms have multiple PCI root busses (e.g. xeon_sp), where bus numbers are limited. This provides a basic check. On some platforms it looks like programming 0xff to the subordinate bus number confuses and hangs the hardware. Change-Id: I0582b156df1a5f76119a3687886c4d58f2d3ad6f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59395 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2023-02-05mb/intel/mtlrvp: Add chip configuration for I2C devicesHarsha B R
This patch adds below chip configuration for I2C devices for mtlrvp. +-----------+--------------------+-------------+ | INTERFACE | PCI Number (B:D:F) | DEVICE | +-----------+--------------------+-------------+ | I2C0 | 0:0x15:0 | CAM1 | +-----------+--------------------+-------------+ | I2C1 | 0:0x15:1 | CAM0 | +-----------+--------------------+-------------+ | I2C2 | 0:0x15:2 | NC | +-----------+--------------------+-------------+ | I2C3 | 0:0x15:3 | HID | +-----------+--------------------+-------------+ | I2C4 | 0:0x15:4 | NC | +-----------+--------------------+-------------+ | I2C5 | 0:0x15:5 | NC | +-----------+--------------------+-------------+ BUG=b:224325352 BRANCH=None TEST=Able to boot mtlrvp (LP5/DDR5) to ChromeOS. Also verify serial bus enumeration through lspci. 00:15.0 Serial bus controller: Intel Corporation Device 7e78 (rev 01) 00:15.1 Serial bus controller: Intel Corporation Device 7e79 (rev 01) 00:15.3 Serial bus controller: Intel Corporation Device 7e7b (rev 01) Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ia5964472be902041f961187c0072a89055badd4f Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>