summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-22soc/amd/picasso: Add support for PSP NVRAM base addr and sizeRitul Guru
Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Change-Id: I07d5aaac9c05986e8a952c7e670d002d864e18d7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67170 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22util/amdfwtool: Add support for PSP NVRAM base addr and sizeRitul Guru
Add parameters to support adding the location and size of the PSP NVRAM area to the PSP directory table. Verified this change on PCO based Bilby platform. Change-Id: I1664893db6f6dcdc588aeaf9448c2d81390af5fa Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67137 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22mb/google/brya/var/agah: Explictly program the dGPU's PCI IRQTim Wawrzynczak
Currently the `pch_pirq_init()` function in lpc_lib.c will program PIRQ IRQs for all PCI devices discovered during enumeration. This may not be correct for all devices, and causes strange behavior with the Nvidia dGPU; it will start out with IRQ 11 and then after a suspend/resume cycle, it will get programmed back to 16, so the Linux kernel must be doing some IRQ sanitization at some point. To fix this anomaly, explicitly program the IRQ to 16 (which we know is what IRQ it will eventually take). BUG=b:243972575 TEST=`lspci -vvv -s1:00.0|grep IRQ` shows IRQ 16 is programmed at boot and stays consistent after suspend/resume. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I66ca3701c4c2fe5359621023b1fd45f8afd3b745 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67746 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22mb/google/brya/acpi: Don't clear GC6 flag after GC6 entryTim Wawrzynczak
According to Nvidia, the GC6 flag (DFEN) should not get cleared after a successful GC6 entry; the kernel driver will not re-inform ACPI that the exit should be GC6 exit as well. BUG=b:243888246 BRANCH=brya TEST=tested by Nvidia Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I220795928d03f269de48278ea0ab57de7253fad5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67745 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22mb/google/hatch: split up hatch and puff baseboardsMatt DeVillier
The hatch and puff baseboards have diverged enough to where it makes more sense to split them into separate boards. Copy the mb/google/hatch directory into a new dir 'puff' and strip out all boards and items related to the hatch baseboard. Remove all puff-related items from the original hatch directory. Clean up and alphabetize Kconfig selections. Test: build and boot akemi hatch variant and wyvern puff variant. Change-Id: I8c7350f3afcff3ddefc6fa14054a3f9257568cd3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62970 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22common/block/fast_spi: Add extended BIOS window as reserved regionWerner Zeh
The fast SPI driver reports the BIOS window as reserved so that the OS is aware of this region. Now that platforms which supports an extended BIOS window are added to this driver, add the extended range as reserved as well if it is enabled. And since this is now handled in the SPI driver itself, remove the extended BIOS region reporting from common systemagent code. Change-Id: Ib5c735bffcb389be07c876d7b5b2d88c545a0b03 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-22soc/intel/spi: Move BIOS flash SPI controllers to fast SPI driverWerner Zeh
There are two classes of SPI controllers on Intel chipsets: * generic usable SPI controllers * SPI controller hosting the BIOS flash (fast SPI controller) While the first class can be used for generic peripheral attachment the second class mostly controls the BIOS flash and a TPM device (if enabled). The generic SPI driver is not fully applicable to the fast SPI controller. In addition, the fast SPI controller reports the reserved MMIO range used for the BIOS flash mapping so that the OS is aware of this range. This patch moves the fast SPI controller of all known SoCs to the fast SPI driver in common code. In addition, the PCI device for the fast SPI controller is removed from the function 'spi_soc_devfn_to_bus' as this is a callback of the generic SPI driver. Change-Id: Ia881c1d274acdcf7f042dd8284048a7dd018a84b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-22vc/intel/fsp/mtl: Update header files from 2304_01 to 2344_00Srinidhi N Kaushik
Update header files for FSP for Meteor Lake platform to version 2344_00, previous version being 2304_01. FSPM: 1. Address offset changes FSPS: 1. Deprecated CstateLatencyControlTimeUnit UPDs 2. Deprecated HybridStorageMode 3.Address offset changes BUG=b:245167089 TEST=emerge-rex intel-mtlfsp Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Iaee5c66811c340d12921ff9247461df36de4739a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-09-22mb/siemens/mc_apl7/Kconfig: Enable PTN3460 early initJan Samek
Enable early initialization of the PTN3460 DP-to-LVDS bridge on this board in order to allow showing the bootsplash screen at coreboot runtime. Change-Id: Ib1b727cef5fb8bea2d6d6c9896ad0107caeea51a Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67682 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22drivers/i2c/ptn3460: Add early init optionJan Samek
Create Kconfig options and boot state machine callback in ramstage for an early initialization of the PTN3460 DP-to-LVDS bridge. This allows showing the bootsplash screen on mainboards utilizing this chip during the PCI device enumeration. BUG=none TEST=Select PTN3460_EARLY_INIT config switch in mainboard Kconfig and check the log for "Attempting PTN3460 early init" message. If the board (e.g. siemens/mc_apl7 in this case) is also configured for showing the bootsplash logo, it should be now visible. Change-Id: I5424d062b3fb63c78cfced3971376353be11c504 Signed-off-by: Jan Samek <jan.samek@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67681 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22mb/google/cherry: Initialize PCIe by SKU encodingYu-Ping Wu
All cherry boards (tomato, dojo) share the same SKU ID encoding, in the sense that a device has NVMe storage if and only if the BIT(1) of SKU ID is set (otherwise eMMC). Therefore, instead of hard coding the list of NVMe (PCIe) SKU IDs, we check the BIT(1) to decide whether to initialize PCIe. In addition, in preparation for UFS devices coming in the future, reserve BIT(3) (which is unset for all of current SKUs) for them. BUG=b:237953117, b:233327674 TEST=emerge-cherry coreboot BRANCH=cherry Change-Id: I9b30338645a87f29f96a249808b90f1ec16f82df Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-09-22cpu/x86/smm/smm_module_loader.c: Fix STM setupEugene Myers
CB:63475 inadvertently disabled the STM by moving its load point off of the MSEG boundry, which is a hardware requirement. In addition, the BIOS resource list cannot be located within the MSEG. This patch fixes the issue by moving the STM load point to the MSEG boundry and placing the bios resource list just below the MSEG where the STM setup functions can find it. Fixes: commit 5747f6c (cpu/x86/smm_module_loader.c Rewrite setup) Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov> Change-Id: I7359939063bb1a172fcb701551c099edebfbedd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67665 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Eugene Myers <cedarhouse1@comcast.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22Documentation: Fix "Platforms supported on branches" tablesNicholas Chin
Recommonmark doesn't support markdown tables. Replace them with embedded reStructuredText tables as described in the documentation guidelines. Change-Id: I2d562603d5a6b6fe71e6729e9c44440af253ad20 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67668 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22checkpatch.conf: Ignore check for pointer comparisons to NULLElyes Haouas
Change-Id: I1e0c4470bf946285d6af3c8b2f143982bc335159 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67697 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-09-22util/coreboot-configurator: Update legacy_8254_timer descriptionSean Rhodes
The help text and label for legacy_8254_timer is inverted, so update this so that it is correct. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I866a15886d1cfd2b77094742787dee7a36a54e85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65348 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22util/coreboot-configurator: Add RPM spec fileSean Rhodes
Add RPM spec to allow building RPMs, for both coreboot-configurator and nvramtool, for Fedora. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I80a77d0f2246409c06e22abb229d63c4611a9fb5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/65346 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-22util/coreboot-configurator: Update Debian dependanciesSean Rhodes
Change the control file to allow either libyaml-cpp0.6 or libyaml-cpp0.7. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I754d3e2018ab78fcb657d313c8662313738b190a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-09-22soc/mediatek/mt8188: Allow CPUfreq hardware to access MCUPM registersLiju-Clr Chen
This patch fixes AP hanging issue caused by the handshaking between MCUPM and CPUfreq driver. CPUfreq hardware failed to read MCUPM registers due to DEVAPC permission. Therefore, update the DEVAPC settings to fix this issue. BUG=none TEST=CPUfreq in kernel test pass. Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-21mb/google/brya/var/crota: set tcc_offset value to 1 ℃Johnny Li
Set tcc_offset value to 1℃ in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:246913963 TEST=USE="project_crota project_brya" emerge-brya coreboot Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com> Change-Id: Ie2f60bed34fbd6fa3624be60138511a22b199a8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-21soc/intel/meteorlake: Skip the TCSS D3 cold entry sequencezhaojohn
This patch provides a workaround which skips requesting IOM for D3 cold entry sequence. BUG=b:244082753 TEST=Verified MUX configuration after hot plugging Type-C devices on Rex and MTL RVP boards. Change-Id: I17bcde75360c4b2b40885d355702e3e5f45d770a Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-21tests: Add support for tests build failures detectionJakub Czapiga
This patch introduces new target: junit.xml-unit-tests, which builds and runs unit-tests. It also creates build log containing build logs. This feature allows for one to see build failures in Jenkins dashboard. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I94184379dcc2ac10f1a47f4a9d205cacbeb640fe Reviewed-on: https://review.coreboot.org/c/coreboot/+/67372 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-20Revert "soc/intel/apollolake: Configure FSP UPDs to allow coreboot to lockdown"Tim Wawrzynczak
This reverts commit 7ef5376123d4d0ebb811795fcee1de7066f65a0f. Reason for revert: It was merged before its dependencies so now master is broken. Change-Id: Ia270efaed4f5c9d0c7b9761ae22dec55f57f74cf Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67285 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-20Revert "Kconfig: Allow x86 to compress pre-ram stages if not run XIP"Martin L Roth
This reverts commit 6317aff5b3028ad44b7885b6b63263c55b5aadb3. Reason for revert: fix broken tot master Change-Id: Ie8075cf6c80448bfc957a1e1183f0283d2011b1b Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67287 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-20Revert "mb/prodrive/hermes: Add part numbers to SMBIOS"Angel Pons
This reverts commit d6695626631a86d9613ea7c34ff0e898fbfa443c. Reason for revert: Was submitted out-of-order and with an unresolved TODO in the commit message. Change-Id: Id5a8770226afbfcdf63d451157e4586b6cdd5189 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67284 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-20mb/starlabs/starbook/kbl: Correct USB port for BluetoothSean Rhodes
Previously, the Bluetooth interface worked when port 9 was enabled. Now, it works with port 5 enabled, which matches the schematic. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If783e60c8120adcd6522676cb3343ed46bf39d78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-09-20mb/google/dedede: Resume from suspend on critical batteryIvan Chen
This patch makes dedede EC wake up AP from s0ix when the state of charge drops to low_battery_shutdown_percent. Demonstrated as follows: 1. Boot OS. 2. Run powerd_dbus_suspend. 3. On EC, run battfake 4. 4. System resumes. BUG=b:244253629 TEST=Verified on dedede Change-Id: I39234d2b9e739383b5f96be49077f8c9831fa0fa Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67320 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-20soc/intel/alderlake: Explicitly disable Energy Efficiency TurboJeremy Compostella
FSP silicon 3347 changed the default value of the EnergyEfficientTurbo Updateable Product Data (UPD), enabling the Energy Efficient Turbo feature by default. This feature prevents the cores from entering Turbo frequency under heavy load. As a result of this FSP change, coreboot explicitly disables this feature to stay consistent with commit `caa5f59279e Revert "soc/intel/alderlake: Enable energy efficiency turbo mode"'. BRANCH=firmware-brya-14505.B BUG=b:246831841 TEST=verify that bit 19 of MSR 0x1fc is set. 'iotools rdmsr 0 0x1fc' Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I7498f87eb4be666b34cfccd0449a2b67a92eb9db Reviewed-on: https://review.coreboot.org/c/coreboot/+/67650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-09-20mb/intel/adlrvp: enable ECT for LP5 memoryZhixing Ma
On ADLRVP with LP5 memory, MRC team recommends enabling ECT(Early Command Training) to avoid hang during boot process. BRANCH=firmware-brya-14505.B TEST=Booted to OS on ADLRVP with LP5 memory. Signed-off-by: Zhixing Ma <zhixing.ma@intel.com> Change-Id: I2472707825bbbdd8e5c12a714e0d40ea0b458838 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-09-20mb/google/brya/variants/skolas: Set power limit valuesSumeet Pawnikar
Skolas board is based on Raptor Lake SoC, not Alder Lake. The code change sets CPU power limit values as performance configuration based on various Raptor Lake SoC SKUs as per the document #686872. BUG=b:242869605 BRANCH=None TEST=Built and tested on skolas board Change-Id: Ieb3ca4ff77039412ef56da49e1b438f5e0b9db02 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-09-20qualcomm/sc7280: initialize tu struct with zerosVinod Polimera
Coverity is throwing a bunch of "maybe uninitialized" errors for tu struct. Initialize the tu struct with zero. BUG=b:182963902,b:216687885 TEST=Validated on qualcomm sc7280 development board. Monitor name: LQ140M1JW49 Change-Id: Ie249ad4f53abc91376445420712364a28618a15a Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-09-20mb/google/brask/variants/moli: enable ddc on DDI_PORT_2Raihow Shi
Enable ddc on DDI_PORT_2 for support DP++. BUG=b:240382609 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: I475e3c0278cfa92ab40ad84f6da580b4cded9933 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-20soc/intel/alderlake: Add power state thresholdsGaggery Tsai
This patch adds power state 1/2/3 threshold setting interfaces and pass the settings to FSP. BUG=b:229803757 BRANCH=None TEST=Add psi1threshold and psi2threshold to overridetree.cb and enable FSP log to ensure the settings are incorrect. Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Change-Id: I0330ede4394ebc2d3d32e4b78297c3cb328660d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2022-09-20mb/google/dedede/var/boten: Turn off camera during S0ixKarthikeyan Ramasubramanian
Add a variant specific S0ix hook to fill the SSDT table to disable and enable camera during suspend and resume respectively. BUG=b:206911455 TEST=Build Boten BIOS image. Ensure that camera is disabled during suspend and enabled during resume. Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
2022-09-20mb/google/rex: Add WWAN ACPI supportIvy Jian
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM features from RTD3. BUG=b:244077118 TEST=check cbmem -c \_SB.PCI0.RP06: Enable RTD3 for PCI: 00:1c.5 (Intel PCIe Runtime D3) \_SB.PCI0.RP06: Enable WWAN for PCI: 00:1c.5 (Fibocom FM-350-GL) check PXSX Device is generated in ssdt. Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I6114c589769d2eca882cf1a5255cf4c5937121a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-20mb/google/nissa/var/xivu: Add supported new memory partIan Feng
Add new ram_id:3 (0011) for memory part K3LKCKC0BM-MGCP. DRAM Part Name ID to assign K3LKCKC0BM-MGCP 3 (0011) BUG=b:247039096 TEST=Use part_id_gen to generate related settings and emerge-nissa coreboot Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Change-Id: I78d2e501b9d8d801a3d149002f638125bf4275f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67676 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-09-20cpu/intel/haswell: Update Broadwell ULT µcode updatesAngel Pons
The µcode updates for Broadwell come from coreboot's blobs submodule and have not been updated in at least 7 years. Use the µcode updates available in the intel-microcode submodule. This change forgoes some µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2 and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs with CPUID 0x40651 in favor of a newer intel-microcode revision that was already being used: when the µcode updates are concatenated into one file, the newer µcode update revision would be placed before the older revision, so the latter would never be used. Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-20cpu/intel/haswell: Hook up Crystal Well µcode updatesAngel Pons
Commit 27126f135dad3c0e2f91394e7088b2ff50220146 (cpu/intel/haswell: add Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include any µcode updates for them. It is unknown how this could have worked as the initial µcode inside the CPU can be quite unstable. Intel CPUs with support for FIT (Firmware Interface Table) can have their µcode updated before the x86 reset vector is executed. The µcode updates for Crystal Well CPUID 0x40661 can be found inside the intel-microcode submodule. There are no publicly available µcode updates for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which is not meant to be used anymore. Hook up the available µcode updates for Crystal Well CPUs. Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-20cpu/intel/haswell: Do not include useless µcode updatesAngel Pons
There are two types of Haswell/Broadwell platforms: Trad(itional) with separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share one package. Mainboards can specify which platform type they are using the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences between Trad and ULT/ULX that it's not worth doing runtime detection. The CPUIDs are different for Trad and ULT/ULX platforms, and so are the µcode updates. So, including Trad µcode updates in a coreboot image for an ULT/ULX mainboard makes no sense, and vice versa. Adapt the Makefile so that only relevant µcode updates are added. Also, add a few comments to indicate which updates correspond to which CPUs. TEST=Run binwalk on coreboot.rom to verify included µcode updates for: - Asrock B85M Pro4 (Haswell Trad) - HP Folio 9480M (Haswell ULT/ULX) - Purism Librem BDW (Broadwell ULT/ULX) Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-19mb/intel/mtlrvp: Add board_info.txtTim Wawrzynczak
Builds are failing on upstream master branch because there is no board_info.txt for the Intel Meteor Lake RVP mainboard; this patch adds a basic one so the tree will build. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I3356ad65132dc4aaebd5e7d959a2bdb9ab1316b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67711 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Jon Murphy <jpmurphy@google.com> Tested-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2022-09-19mb/google/brya/var/skolas: Add MIPI WFC supportAlanKY Lee
Modify config settings based on new module KBAE350 spec BUG=b:245640845 BRANCH=None TEST=Build and boot on skolas Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Change-Id: I8a9bee9bb79bda4e3f1d259716844b42a7fce397 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jimmy Su <jimmy.su@intel.corp-partner.google.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-09-19soc/intel/apollolake: LZ4 Compress FSP-MArthur Heymans
FSP-M is not run XIP so it can be compressed. This more than halves the binary size. 364544 bytes -> 168616 bytes. On the up/squared this also results in a 83ms speedup. TESTED: up/squared boots. Change-Id: Ic76b51f0f3007b59ccb9f76b6a57bb9265dab833 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48158 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-09-19Kconfig: Allow x86 to compress pre-ram stages if not run XIPArthur Heymans
On the intel/glkrvp compressed: - romstage: 29659 - verstage: 31303 non compressed: - romstage: 46244 - verstage: 47012 On qemu (with some additional patch to not run XIP) compressed: - romstage: 11203 non compressed: - romstage: 13924 Even with a small romstage the size improvements are substantial, which should result in a speedup when loading the stage. On the up/squared loading romstage is sped up by 9ms. TESTED: successfully boot the up/squared & google/vilboz. Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-09-19mb/intel/mtlrvp: Add flashmap descriptorJamie Ryu
This adds 32MB flashmap descriptor as below: Descriptor Region: 0x0 - 0x3fff (~16KB) Intel EC Region: 0x4000 - 0x83fff (~512KB) ME Region: 0x84000 - 0x8fffff (~8.5MB) BIOS Region: 0x900000 - 0x01ffffff (~23MB) BUG=b:224325352 TEST=util/abuild/abuild -p none -t intel/mtlrvp -a -c max Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Change-Id: Ifb572efe56eb7400b8328ba797892738f5927158 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66098 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/intel/apollolake: Add bits of GEN_PMCON2 registerSean Rhodes
The values in this patch were found in the following datasheets: * 334819 (APL) * 336561 (GLK) Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie7d40395d754b2abdf9079d6ee5e8ab8c536d449 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67661 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/intel/apollolake: Configure FSP UPDs to allow coreboot to lockdownSean Rhodes
Configure FSP S UPDs to allow coreboot to handle the lockdown. The main change here is setting `Write Protection Support` to 0, as the default is Enabled, which shouldn't allow writes (even though it seems to). The UPDs are identical on APL and GLK, but all ones configured in this patch have been there since their initial releases. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I35185b498315511f3236758caebfe2f9c28fd04a Reviewed-on: https://review.coreboot.org/c/coreboot/+/65039 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19mb/prodrive/hermes: Add part numbers to SMBIOSAngel Pons
Adjust the EEPROM layout to account for two new fields: board part number and product part number. In addition, put them in a Type 11 SMBIOS table (OEM Strings). TODO: This currently stores the "raw" part numbers, should we add a prefix to the SMBIOS strings? Change-Id: I85fb9dc75f231004ccce2a55ebd9d7a4867fcb93 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67276 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19amd/mendocino/root_complex: Throttle SOC during low/no batteryTim Van Patten
Use dynamic power and thermal configuration (DPTC) via ACPI ALIB calls to throttle the SOC when there is no battery or critically low battery, to enable the SOC to boot without overwhelming the AC charger and browning out. DPTC is not enabled for low/no battery mode with this CL. It will be enabled for Skyrim in a following CL. BRANCH=none BUG=b:217911928 TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ifeddb99e97af93b40a5aad960d760e4c101cf086 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67189 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19amd/mendocino/acpi/soc: Add DPTC SupportTim Van Patten
Add support for DPTC by calling SB.DPTC() as part of PNOT(). BRANCH=none BUG=b:217911928 TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ifc332bfc4d273031c93b77673224b4f3c2871fb1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67694 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19skyrim/overridetree: Add "Throttle" DPTC valuesTim Van Patten
Add the Low/No Battery Mode DPTC values for Skyrim. These values were generated by AMD. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I5f277761cb7379b4344492f95010d8d5ddd689fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/67693 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/amd/mendocino: Add low/no battery VRM limit registersTim Van Patten
Add DPTC Low/No battery VRM limit registers to throttle the SOC. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I9c4ed227b54efbab9f03d6acf64b1160ad73f460 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67692 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19amd/mendocino/root_complex: Set DPTC VRM limit valuesTim Van Patten
Set the DPTC VRM limit values for normal mode. BRANCH=none BUG=b:217911928 TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I2041a713323f039dcfdacdfa43e74cf450c3c0d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67691 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19mb/google/skyrim: Add "Normal" DPTC valuesTim Van Patten
Add the Normal Mode DPTC values for Skyrim. These values were generated by AMD. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I1e1f55b941f3e70aad33d55a90fb012eac3ba12d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67690 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/amd/mendocino: Add VRM limit DPTC registersTim Van Patten
Add VRM DPTC limit registers. These are required when throttling the SOC for low/no battery mode to prevent the SOC from overwhelming the charger. b/245942343 is tracking passing these additional fields to the FSP and having the FSP configure them. BRANCH=none BUG=b:217911928 TEST=Build skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ie62129d967192f9a9cf654b1854d7dbe4324802a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67378 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/amd/acpi: Add low/no battery mode to DPTCTim Van Patten
Update acpigen_write_alib_dptc() to support "low/no battery mode", which throttles the SOC when there is no battery connected or the battery charge is critically low. This is in preparation for enabling this functionality for Mendocino. BUG=b:217911928 TEST=Build zork TEST=Boot nipperkin TEST=Boot skyrim Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Icea10a3876a29744ad8485be1557e184bcbfa397 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66804 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-19soc/amd/mendocino/acpi: Add support for shared TPM_I2C controllerJan Dabros
There are platforms equipped with AMD SoC where I2C3 controller connected to TPM device is shared between X86 and PSP. In order to handle this, PSP acts as an I2C-arbitrator, where x86 (kernel) sends acquire and release requests to be accepted by PSP. Introduce new CONFIG for Mendocino SoCs similar to what we have for Cezanne. BUG=b:241878652 BRANCH=none Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I015a24715271d2b26c0bd3c9425e20fb2987a954 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-19mb/google/rex: Add ELAN6918 touchscreenSubrata Banik
ELAN6918 Power Sequencing seems not perfectly matching with the previous platforms and setting GPP_C06 to high prior to the power sequencing is actually makes it work. Ideally Power Sequencing should be as below for ELAN6918 (in ACPI) `POWER enabled -> RESET deasserted -> Report EN enabled` But below sequence is only working currently: `Report EN enabled (ramstage) -> POWER enabled (ACPI) -> RESET deasserted (ACPI)` BUG=b:247029304 TEST=Verified ELAN touch panel is working as expected after booting Google/rex device to ChromeOS. Change-Id: Ideaeb0faa882b8e603534bbface51ea76923d436 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-19mb/google/brya/var/brya4es: deprecate brya4esNick Vaccaro
The brya4es variant is no longer needed, removing code for brya4es. BUG=b:246611270 TEST=None Change-Id: I9b222f89fe766c63158518713be19d7959451721 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-09-19mb/siemens/mc_apl1: Do not wait for legacy devices on mc_apl7Werner Zeh
Since there are no legacy devices on the variant mc_apl7 do not wait for them on mc_apl7. Change-Id: Ia4e6c0fb495a347be51bd6604a1d9b73098fb7b6 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67684 Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-18crossgcc: Upgrade llvm from version 14.0.6 to 15.0.0Elyes Haouas
Test build for QEMU x86 i440fx/piix4. Change-Id: I3144a83fcbd92eec51d70e9be33ff2fcb2821731 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67416 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-18crossgcc: Upgrade cmake from 3.23.2 to 3.24.2Elyes Haouas
Change-Id: I81a8371190513ca34d3c5efb0e3770ac3d873b03 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-09-18cbmem: use aligned_memcpy for reading lb_cbmem_entry informationYidi Lin
The lbtable contains the memory entries that have fields unnaturally aligned in memory. Therefore, we need to perform an aligned_memcpy() to fix the issues with platforms that don't allow unaligned accesses. BUG=b:246887035 TEST=cbmem -l; cbmem -r ${CBMEM ID} Change-Id: Id94e3d65118083a081fc060a6938836f6176ab54 Signed-off-by: Yidi Lin <yidilin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-17riscv: Enable the newfangled way of selecting instruction setsPatrick Georgi
gcc12+ will require riscv architecture selection to come not only with featurei suffixd charactersa, it also comes with feature_ful suffix_ed words_mith. Much creative, very appreciate. To accommodate for this madness, enable the already existing (but off by default) support for that in our gcc11 build, support using by detecting the compiler's behavior in xcompile and pass that knowledge along to our build system. Then cross our fingers and hope for the best! Change-Id: I5dfeed766626e78d4f8378d9d857b7a4d61510fd Signed-off-by: Patrick Georgi <patrick@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-09-17security/vboot: Add rollback NVRAM space for TPM 2Miriam Polzer
Create an NVRAM space in TPM 2.0 that survives owner clear and can be read and written without authorization. This space allows to seal data with the TPM that can only be unsealed before the space was cleared. It will be used during ChromeOS enterprise rollback to securely carry data across a TPM clear. Public documentation on the rollback feature: https://source.chromium.org/chromium/chromiumos/platform2/+/main:oobe_config/README.md BUG=b/233746744 Signed-off-by: Miriam Polzer <mpolzer@google.com> Change-Id: I59ca0783b41a6f9ecd5b72f07de6fb403baf2820 Reviewed-on: https://review.coreboot.org/c/coreboot/+/66623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-09-16console: attach smbus console driverHusni Faiz
This patch attaches the smbus console functions to the high level console interface. Change-Id: I3a9bf64e59d529253bfdcdfa565bb2bb92975728 Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67341 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-16bd82x6x/early_pch: enable smbus in bootblock stageHusni Faiz
SMBus is typically enabled in the ROMSTAGE. To get the BOOTBLOCK console message, the SMBus should be enabled in the BOOTBLOCK stage. Change-Id: I97d0afb013ede428383acaa0aa97ab04fe80e2a4 Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67340 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-16drivers/smbus: add smbus console driverHusni Faiz
This patch adds a new smbus console driver and Kconfig options to enable the driver. Change-Id: Ife77fb2c3e1cc77678a4972701317d50624ceb95 Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67339 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-16soc/intel/cnl: Add Cometlake-H/S Q0 (10+2) CPU IDJeremy Soller
The Q0 stepping has a different ID than P1. Reference: CML EDS Volume 1 (Intel doc #606599) Change-Id: Id1da42aa93ab3440ae743d943a00713b7df3f453 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-16soc/intel/alderlake: Set FSP-S GnaEnable based on devicetreeJeremy Soller
Change-Id: Ifd25416c55c4dba1709f74cdedc0c58e881d6266 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-16util/kconfig/regex.c: Remove leftoverElyes Haouas
coreboot doesn't support the MIPS architecture anymore. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I404d034949a7786d7971117081537baf27ff2e22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67353 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2022-09-16crossgcc [binutils]: Remove 'enable-plugins' optionElyes Haouas
unneeded 'enable-plugins' option sneaked in..., so remove it. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Id1d7f2c7e6b70c28e1060c6ee915363ffe412ef6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67645 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-09-16crossgcc [binutils]: Remove invalid enable-interwork optionElyes Haouas
'enable-interwork' is not a binutils configure option. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I29cd6137c700ff6871868a723daf33909aa218ff Reviewed-on: https://review.coreboot.org/c/coreboot/+/65609 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-09-16drivers/usb/hub/acpi.c: Don't use heap for ACPI nameArthur Heymans
Using malloc would increase the heap use each time this function is called. Instead allocate a per struct device buffer inside the chip_info struct. Found by coverity scan, CID 1488815. Change-Id: Ie24870b34338624b3bf3a6f420debdd24a68ffbd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64338 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-09-16mb/google/nissa/var/nivviks: Enable nau8825 ADCOUTEric Lai
Enable nau8825 ADCOUT to make I2S signal meet spec. BUG=b:234789689 TEST=I2S waveform can meet spec timing. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I7ea472ac4e4add4e790b9b3fbb6becd40665eb1a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-09-16drivers/i2c/nau8825: Add ADCOUT IO drive strength controlEric Lai
Add a property to control the driving of ADCOUT. BUG=b:234789689 TEST= build passed. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ibbedd5838a795ee645a5458b960062c5530ff3b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-09-16soc/intel/common: Update comment on HFSTS1.spi_protection_modeSridhar Siricilla
The patch updates comment on HFSTS1.spi_protection_mode. The spi_protection_mode indicates SPI protection status as well as EOM status (in a single staged EOM flow). Starting from TGL platform, staged EOM flow is introduced. In this flow, spi_protection_mode alone doesn't indicate the EOM status. For information on EOM status, please refer secton# 3.6.1 in doc# 612229. TEST=Build code for Gimble Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I19df5cfaa6d49963bbfb3f8bc692d847e58c4420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-09-16contributing/coding_style.md: Add missing ">"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I2f2cd20139f4cdb7ba665e9e49a03faea1ac085b Reviewed-on: https://review.coreboot.org/c/coreboot/+/67658 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-09-16Revert "drivers/wifi: Move MTL Magnetar CNVi DIDs from SoC to generic driver"Subrata Banik
This reverts commit 510a55d4eeaeb32047c17328ef238b55b89e7296. Reason for revert: Observed `missing read resource` issue for cnvi device BUG=b:244687646 TEST=No error seen in AP log while booting Google/rex Without this patch: [SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 [ERROR] GENERIC: 0.0 missing read_resources [SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done With this patch: [SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 [SPEW ] PCI: 00:14.3 read_resources bus 0 link: 0 done Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I1e881313729f1088cffa7c161722ee79bb9acc49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67566 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-16soc/intel/meteorlake: Enable `SOC_INTEL_COMMON_BLOCK_CNVI` configSubrata Banik
TEST=Able to build and boot Google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I64aab8391f89414754785cea47671f3350324297 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-16mb/google/rex: Enable `DRIVERS_WIFI_GENERIC` configSubrata Banik
TEST=Able to build and boot the Google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iae5317b24856ef2cbd2f36cc28f645826536c21a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2022-09-15amd/mendocino: Control DPTC with only KconfigTim Van Patten
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any skyrim boards, similar to mainboard/google/zork/Kconfig. This makes the value dptc_tablet_mode_enable redundant. This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC is only included for boards that actually enable it. BRANCH=none BUG=b:217911928 TEST=emerge-skyrim coreboot Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I73fca5a16826313219247f452d37fb526ad4f4df Reviewed-on: https://review.coreboot.org/c/coreboot/+/67639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15amd/cezanne: Control DPTC with only KconfigTim Van Patten
SOC_AMD_COMMON_BLOCK_ACPI_DPTC can be enabled conditionally for any guybrush boards, similar to .mainboard/google/zork/Kconfig This makes the value dptc_tablet_mode_enable redundant. This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC is only included for boards that actually enable it. BRANCH=none BUG=b:217911928 TEST=emerge-guybrush coreboot Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: I07f1266fa80a6c9ee4ec3b3ba970a70c6c72fb54 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15zork: Control DPTC with only KconfigTim Van Patten
Moving the config value SOC_AMD_COMMON_BLOCK_ACPI_DPTC to soc/amd/picasso/Kconfig and conditionally enabling it for only Morphius boards makes the value dptc_tablet_mode_enable redundant. This CL removes dptc_tablet_mode_enable so DPTC is controlled entirely with the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. This means DPTC is only included for boards that actually enable it. BRANCH=none BUG=b:217911928 TEST=Build zork Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Ic54a9bb491234088be8184bec8b09e2e31ffa298 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15soc/amd: Do SMM relocation via MSRArthur Heymans
AMD CPUs have a convenient MSR that allows to set the SMBASE in the save state without ever entering SMM (e.g. at the default 0x30000 address). This has been a feature in all AMD CPUs since at least AMD K8. This allows to do relocation in parallel in ramstage and without setting up a relocation handler, which likely results in a speedup. The more cores the higher the speedup as relocation was happening sequentially. On a 4 core AMD picasso system this results in 33ms boot speedup. TESTED on google/vilboz (Picasso) with CONFIG_SMI_DEBUG: verify that SMM is correctly relocated with the BSP correctly entering the smihandler. Change-Id: I9729fb94ed5c18cfd57b8098c838c08a04490e4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15soc/intel/skylake: Assign device ops in chipset devicetreeNico Huber
Some PCI IDs were missing, and at least one (SPT's fast SPI device in a generic SPI driver) was wrong. Hence, this patch actually changes behavior depending on the devices actually present in a machine. In this patch the Skylake devicetree is written in a single-line style. Alternative, the device operations could be put on a separate line, e.g. device pci 00.0 alias system_agent on ops systemagent_ops end Tested on Kontron/bSL6. Notable in the log diff is that the CSE and SATA drivers are hooked up now. Change-Id: I8635fc53ca617b029d6fe1845eaef6c5c749db82 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-15sconfig: Allow to specify device operationsNico Huber
Currently we only have runtime mechanisms to assign device operations to a node in our devicetree (with one exception: the root device). The most common method is to map PCI IDs to the device operations with a `struct pci_driver`. Another accustomed way is to let a chip driver assign them. For very common drivers, e.g. those in soc/intel/common/blocks/, the PCI ID lists grew very large and are incredibly error-prone. Often, IDs are missing and sometimes IDs are added almost mechanically without checking the code for compatibility. Maintaining these lists in a central place also reduces flexibility. Now, for onboard devices it is actually unnecessary to assign the device operations at runtime. We already know exactly what operations should be assigned. And since we are using chipset devicetrees, we have a perfect place to put that information. This patch adds a simple mechanism to `sconfig`. It allows us to speci- fy operations per device, e.g. device pci 00.0 alias system_agent on ops system_agent_ops end The operations are given as a C identifier. In this example, we simply assume that a global `struct device_operations system_agent_ops` exists. Change-Id: I2833d2f2450fde3206c33393f58b86fd4280b566 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66483 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-15soc/intel/xeon_sp: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I664f5b7d354b0d9a7144c25604ae4efbdd9ba9a9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-09-15mb/ocp: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ie5fc0a8230cdcc24ad1d2d94cc6d019ff10aac48 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-09-15soc/intel/meteorlake: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Ia2508abe62a194f2921d5535937ba82a60967ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-09-15src/security: Use "if (!ptr)" in preference to "if (ptr == NULL)"Elyes Haouas
Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I3def65c016015d8213824e6b8561d8a67b6d5cf0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-09-15mb/google/mistral/verstage.c: Change loglevel prefixElyes Haouas
BIOS_ERR is inappropriate since the message is informational. Use BIOS_INFO instead. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: I91be3f47ae93c8262e430a06cacec3d2c29ebd58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67539 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-09-15util/ifittool: Error out if microcodes do not fit the FIT tableJeremy Compostella
parse_microcode_blob() returns success when it reaches max_fit_entries microcode. It makes the FIT table size verification in fit_add_microcode_file() useless. This patch makes parse_microcode_blob() error out if max_fit_entries is reached. Note that this size verification is critical as a FIT table only partially listing the microcode patches can lead to boot failures as recently observed on Raptor Lake-P. BRANCH=firmware-brya-14505.B BUG=b:245380705 TEST=compilation errors out when trying to stitch more than CONFIG_CPU_INTEL_NUM_FIT_ENTRIES microcode patches. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Id9c5fb6c1e264f3f5137d29201b9021c72d78fde Reviewed-on: https://review.coreboot.org/c/coreboot/+/67454 Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
2022-09-15cpu/intel/haswell: Allow up to six microcodes in the FIT tableJeremy Compostella
Haswell and Broadwell platforms usually stitch six microcode patches. It has worked so far with the default value of four thanks a bug which is being fixed by `util/ifittool: Error out if microcodes do not fit the FIT table' commit. BUG=b:245380705 TEST=Jenkins build without failing on the FIT table size Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: I23bf79a3e8918499f6c51e6ef829312d5872181a Reviewed-on: https://review.coreboot.org/c/coreboot/+/67466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-09-14zork/Kconfig: Move SOC_AMD_COMMON_BLOCK_ACPI_DPTCTim Van Patten
Move enabling SOC_AMD_COMMON_BLOCK_ACPI_DPTC from soc/amd/picasso/Kconfig to mainboard/google/zork/Kconfig and conditionally enable it only for Morphius boards. This reduces which boards/variants have DPTC enabled to only those that actually use it. BRANCH=none BUG=b:217911928 TEST=Build zork Signed-off-by: Tim Van Patten <timvp@google.com> Change-Id: Iddebcf5dbadae135c8110e2afd9ad76ef7dcc09d Reviewed-on: https://review.coreboot.org/c/coreboot/+/67637 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14acpi/soc: Conditionally include dptc.aslTim Van Patten
Conditionally include dptc.asl based on the Kconfig value SOC_AMD_COMMON_BLOCK_ACPI_DPTC. BRANCH=none BUG=b:217911928 TEST=Build zork TEST=Build guybrush TEST=Build skyrim TEST=Build majolica Change-Id: Idd94af8e8b2d7973abc0fb939e4600189e21656a Signed-off-by: Tim Van Patten <timvp@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67620 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-09-14soc/amd/cezanne/Kconfig: add defaults for FSP_M_FILE and FSP_S_FILEFelix Held
Now that the FSP binary check logic is fixed to only check the FSP files if ADD_FSP_BINARIES is selected, the default paths for the not yet published Cezanne FSP binaries can be added without breaking abuild. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9950a1fe7bd1b21109cca9631de1a8f1d265d9b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-14soc/amd/common/fsp: only check FSP_M size if ADD_FSP_BINARIES selectedFelix Held
Only check if the FSP_M size is small enough to fit inside the memory region reserved for it if ADD_FSP_BINARIES selected. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Nico Huber <nico.h@gmx.de> Change-Id: I6a115412c113eb0d02b8d4dfc2bb347305f97809 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-09-14util/lint: Add a check for touchpads using the "probed" flagMatt DeVillier
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag") all touchpads in the tree have been switched from using the 'probed' flag to 'detect.' Add a lint check to ensure no touchpads are added with the probed flag. TEST=manually change one touchpad to use 'probed' flag and ensure lint check catches it. Change-Id: Ie0aee2e3778fc56c6c21c97995738a147a1fa0d4 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67486 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-09-14mb/amd/gardenia: deselect HAVE_PIRQ_TABLE and drop incorrect irq_tablesFelix Held
This file isn't correct, since the Stoneyridge SoC doesn't have a legacy PCI bridge on bus 0 bridge 0x14 function 4. Google/Kahlee doesn't select HAVE_PIRQ_TABLE, so it's likely safe to also not select it for this board. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibaf470b9ff7823019772d43af98ebc47af395728 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-14mb/google/kahlee: drop unused and incorrect irq_tables.cFelix Held
This file is neither included in the build nor correct, since the Stoneyridge SoC doesn't have a legacy PCI bridge on bus 0 bridge 0x14 function 4. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0daed891984faed9fbc36f0215edfc56e0ae14a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-14mb/google/skyrim/winterhold: Use 'detect' vs 'probed' for touchpadsMatt DeVillier
As of commit 2cf52d80a6ec ("mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag") all touchpads in the tree have been switched from using the 'probed' flag to 'detect.' Winterhold was added in between the time that patch was pushed and merged, so switch these instances over too. Change-Id: I34e1265ecd6409f720ae486926c5078f626fc693 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67487 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>