Age | Commit message (Collapse) | Author |
|
The ChromeOS kernel platform driver is adding support for a ChromeOS
privacy screen device, and in order to locate that device, the driver
uses the GOOG0010 reserved HID for this.
Patch for 5.10 kernel can be found at:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/3289984
BUG=b:206850071
TEST=dump SSDT, see _HID instead of _ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If988ca94b6c70d08a7b07cc9f6bbb077fac84e5b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59731
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards may want to use a _HID instead of an _ADR to locate a
graphics device. This patch provides that option in the devicetree.
BUG=b:206850071
TEST=Add `hid` entry in devicetree, dump SSDT and see _HID instead of
_ADR
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I32be4abf5c60be1f94aabaa2e9c734215c4e291e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Tested on Qemu/i440fx. The follow-up commit adds a config file to
buildtest it.
Change-Id: Ieeaa85691e4c4516bb51df0e87c4ecaa940810f0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CPLD can be used for board revision determinition.
Remove info about selecting memory type and add Rev 1.4 info
BUG = N/A
TEST = NA
Change-Id: I4bc851f72ae03e98ab1b2e0e04b07ccf6135ebeb
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Make BSD part of the coreboot commonlib accessible to libpayload.
Change-Id: I09f475d399ab785f3d3ffdb4b42950d2b397845e
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Fix the issue that power consumption of single rank DRAM is greater
than dual rank DRAM due to incorrect settings of rank1 CKE.
Set rank1 CKE to the correct state to fix this issue.
BUG=b:196867407
TEST=DUT can boot to OS.
Signed-off-by: Ryan Chuang <ryan.chuang@mediatek.corp-partner.google.com>
Change-Id: If336197aea4770dda1332b6e83da8ec9a4f9d77b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This patch drops unnecessary `pmc_ipc.c` from Makefile as this
file is getting included upon CONFIG_PMC_IPC_ACPI_INTERFACE selection.
Change-Id: Ie66f0833daf033ec16210221610508f9fbb1e6c7
Signed-off-by: Subrata Banik <subi.banik@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59747
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some herobrine variants have USB hub powered by discrete LDO that is
controlled by USB_HUB_LDO_EN gpio. Assert the GPIO on boot.
BUG=b:182963902
TEST=Validated on qualcomm sc7280 development board.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ia94e046f9eb0d3ce593f3445e0203a7391c14de2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Initialize by calling `setup_usb_host0()` from SOC code
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ic378352a97e4f3ed89089f1f7545f8ebb172b1f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
These values make more sense as an enum, and are currently unused in
ASL files, therefore they can be moved to the appropriate part of the
header file and converted there.
Change-Id: I8b8586b46823b5da3614a0b2a2f2f16802e96962
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Despite Stoneyridge being one only SoC in soc/amd that uses the first
generation of the PSP mailblox interface, this code is common for all
SoCs that use the first PSP mailbox interface generation, so move it to
the common PSP generation 1 code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78126cb710a6ee674b58b35c8294685a5965ecd6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59701
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BlueTooth disappeared after disabled USB2 port 9,
so we need to re-enable it.
BUG=none
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7971509d7428562c80e781339ead059a189cea13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BUG=b:207307897
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Change-Id: Ib1682cdafe1b6ed7cc0cf23624f83d2e5bbfb92e
Signed-off-by: Wizard Shen <shenhu5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Libpayload requires cbmem_id.h file to support extracting values from
CBMEM IMD entries of coreboot tables. Libpayload use BSD-3-Clause
license, and all of its files used to compile a static library have to
use it too.
Change-Id: I97c080e34ebdbcdf14fe3a3c9515b1dea8ede179
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
New PI 1.0.0.5 has more data in HOB of DMI, which has been uploaded to
google internal repo. The dismatched size of HOB causes the wrong data
tranfer. So the coreboot also need to change.
BUG=b:204732649
Change-Id: Id95c37a0d7027d75afddf9d7528ff41ae3a347f5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59687
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This part was copied from Picasso but Cezanne has some more bits used so
add the definitions now.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icd128dca1ec30e7c70501c0e64482159be71cc7b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Both SPI_ROM_BIOS_SEMAPHORE and SPI_ROM_EC_SEMAPHORE bits in the
LPC_PCI_CONTROL are defined in the Stoneyridge BKDG #55072 Rev 3.04,
Raven1 and Picasso PPR #55570 Rev 3.18, Raven2 PPR #55772 Rev 3.08 and
Cezanne PPR #56569 Rev 3.03 which are all platforms that use this code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I855e640d020daf21c9f5b2f62a2ad0fd0274a575
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This one might conflict with '#include <smp/atomic.h>'.
Change-Id: I7413406ca69e78e5a6e539a01e05033243107272
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59691
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch replaces the use of the deprecated
cbfs_locate_file_in_region() API with the new
cbfs_unverified_area_map().
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: If4855280d6d06cf1aa646fded916fd830b287b30
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds a new ..._unverified_area_... group of functions to the
cbfs_map/_load/_alloc() APIs. These functions can be used to access
custom FMAP sections and are meant to replace the existing
cbfs_locate_file_in_region(). The name is intended to highlight that
accesses through this API will not be verified when CBFS_VERIFICATION is
enabled and should always be treated as if they may return malicious
data. (Due to laziness I'm not adding the combination of this API with
the ..._type_... variant at this point, since it seems very unlikely
that we'll ever have a use case for that. If we ever do, it should be
easy to add later.)
(Also remove the 'inline' from cbfs_file_hash_mismatch(). I'm not sure
why I put it there in the first place, probably a bad copy&paste.)
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I402265900f7075aa0c2f58d812c67ea63ddf2900
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Adding USB addressmap for sc7280.
Use common USB driver for sc7280.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: Ib92b74c8035a8c0148a9aa48e7870b261b832a33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add common USB driver for qualcomm soc sc7180 and sc7280.
This includes dwc3 controller, qmp ss phy, qusb hs phy and snsp hs phy.
BUG=b:182963902
TEST=Validated USB enumeration on qcom sc7180 and
sc7280 development board
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Change-Id: I1013ded22855286220cfa747cb25418070fe85a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
When using 32 bit PCI accesses in lpc_enable_port80, we can use the
LPC_IO_OR_MEM_DECODE_ENABLE and DECODE_IO_PORT_ENABLE4 defines and don't
need to re-define bits with offsets from the beginning of the third byte
within this 32 bit register. This allows to drop the
LPC_IO_OR_MEM_DEC_EN_HIGH register definition which points to
LPC_IO_OR_MEM_DECODE_ENABLE + 2 and to drop the re-definitions of the
bit re-definitions with a different offset.
The code in lpc_enable_port80 was originally copied from sb/amd/agesa/
hudson/early_setup.c which might be sort-of a copy from what the AGESA
reference code does.
TEST=When commenting out SOC_AMD_COMMON_BLOCK_USE_ESPI in the Kconfig of
Mandolin and selecting AMD_LPC_DEBUG_CARD, all POST codes still get
shown on the POST code LED display when this patch is applied.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I001bb1c2ccf99e36d4fbd73d3bf96b78ddb87d67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This function is unused and none of the SoCs using this code has a
physical PCI interface any more, so drop this function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia5c5a8ec29264a075fefe75038ef2a84684d6427
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This will enable preloading the microcode. By preloading the
file, into cbfs_cache we reduce boot time.
BUG=b:179699789
TEST=Boot guybrush with CL chain and see microcode preloading and a
reduction of 1 ms.
| 112 - started reading uCode | 1.041 | 1.204 Δ( 0.16, 0.01%) |
| 113 - finished reading uCode | 1.365 | 0.011 Δ( -1.35, -0.10%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: If0c634c692c97769e71acd1175fc464dc592c356
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This will allow us to preload the dsdt.aml file.
BUG=b:179699789
TEST=Build guybrush
| 80 - write tables | 1.564 | 1.08 Δ( -0.48, -0.03%) |
| 85 - finalize chips | 15.483 | 13.543 Δ( -1.94, -0.14%) |
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ibf69ecb947811a2eec861018e3ba5f858155f1c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
PSP_MAILBOX_BAR is defined as PCI_BASE_ADDRESS_4, so use it instead of
PCI_BASE_ADDRESS_4 in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8658b674b9adea85dfc71d7036ccf3ae17464b58
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
PSPV2_STATUS_ERROR and PSPV2_STATUS_RECOVERY aren't used and the bit
definitions are also wrong, so drop those defines. For the PSP mailbox
interface version 2, struct pspv2_mbox is used to access the correct
status bits.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8e2aadfde00e2f7b0f99b462b8e3d6954959a584
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Commit 796aeeba96fc (util/cse_fpt: Add a new tool for managing Intel CSE
FPT binaries) and commit d7fb6a90e1d0 (util/cse_serger: Add a new tool
for stitching CSE components) add two utilities, and building cbfstool
also generates executables for them. When building cbfstool standalone,
these executables are placed in `util/cbfstool/`, and Git should never
track them.
Specify these executables' file names in .gitignore in order to prevent
unintentional inclusion of these files in commits, which is very likely
to happen when using `git add` on directories.
Change-Id: I285a4d7aeee642822eaae2eb69e5d52efb4bc8c0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59670
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are no quad-core CPU models with fam14, \_SB.C002 and .C003 get
removed from ASL.
Change-Id: I96df5b3f93c2dd6a05d5693069b991ca01f71d73
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The checking register will be cleared after EC resets, so we move
bustracker dump from ramstage to bootblock, before triggering EC reset.
TEST=bustracker shows status before watchdog resets
BUG=b:207743045
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ic18dc9742cd9f657a035a374e28371dfc5f04ac3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There will be no log in cbmem if we trigger ec reset on bootblock
stage. Therefore, call dcache_clean_all() before triggering ec
reset to flush cache to store logs on cbmem.
BUG=b:207743045
TEST=show logs on cbmem
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I1bd900beb4cc84f7121c5fb66907fa73b62517fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add Alder Lake-N specific CPU, System Agent, PCH (Alder Point aka ADP),
IGD device IDs.
Document Number: 619501, 645548
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I0974fc6ee2ca41d9525cc83155772f111c1fdf86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
The patch enables cse_fw_sync() before DRAM initialization.
cse_fw_sync() sends HECI commands in order to set CSE's boot partition
and to trigger CSE firmware update.
As part of CSE firmware update, coreboot sends HMRPFO_ENABLE HECI
command. Since CSE supports the command after DRAM Initialization,
cse_fw_sync() is called after DRAM initialization.
Starting from CSE Litev16.0.15.1545, CSE support HMRFPO_ENABLE command
before DRAM initialization too. So, cse_fw_sync() is called before DRAM
initialization.
BUG=b:175516533
TEST=Dependency with CSE Litev16.0.15.1545 integration
Change-Id: Iad7403650df8bc4e40aa6e48ccfeba95a5789a2d
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55364
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames X86_AMD_INIT_SIPI Kconfig to leverage
the same logic (to skip 2nd SIPI and reduce delay between
INIT and SIPI while perform AP initialization) even on
newer Intel platform.
Change-Id: I7a4e6a8b1edc6e8ba43597259bd8b2de697e4e62
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56651
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add prompt string to allow selecting MTK_DFD manually.
TEST=Select and enable MTK_DFD then successfully built firmware images.
BUG=b:207450135
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ied711321efa592cf1bf7b318fe4d0aa155c15c70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Rename pcicfg to pci_map_bus and add prototype for the platforms not
supporting ECAM.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id9517c5ec4fa6b7c7a34552bfdc6d509927f6730
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Only scan one device if it's a PCIe downstream port.
A PCIe downstream port normally leads to a link with only device 0 on
it. As an optimization, scan only for device 0 in that case.
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Change-Id: Id184d03b33e1742b18efb3f11aa9b2f81fa03806
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56788
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: Ia65b1873f1d184b8b8c64a61a26820ae0900437d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There was a duplicate PCI 0:14.4 device in ASL. Only
keep one.
Change-Id: I21af7bdf64ef8a2d31a3452b32bc4a18f8d2df98
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There was a duplicate PCI 0:14.4 device in ASL. Only
keep one.
There are no PCI devices 0:2.0 or 0:3.0 on fam14 northbridge
for graphics. There are no PCIe root ports 0:9.0 or 0:a.0.
Change-Id: Ifa8abb851f8ae4863b2c6d52224d287fd272048d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The section is the same and at root scope.
Change-Id: I3b3ff2fddc7d4db09903151bcb92e3e1b5dc7d69
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The SMMSTORE_IN_CBFS option was just meant as a workaround for an
attempt to backport SMMSTORE into older Chromebooks that never actually
happened. All current and future users of coreboot should be using
SMMSTORE in an FMAP region. The APIs needed for SMMSTORE_IN_CBFS clash
with the CBFS rdev isolation needed for CBFS_VERIFICATION, so let's just
get rid of it.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ia0604a4ffd20b46774631d585925311b65d5a0e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59680
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Dumped using inteltool from the Dell BIOS version A30.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ifdc41a1e6627b68813fb264aed7e30df58fc6d54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59525
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable PS/2 data and clock isolation in order to properly initialize
the PS/2 keyboard and mouse in payload/OS. These bits are set by OS via
ACPI and can survive S5 state. It is necessary to clear them after an
ungraceful shutdown in order to perform PS/2 controller initialization
e.g. in SeaBIOS.
TEST=PS/2 keyboard can always be successfully initialized in SeaBIOS
on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iac6be095c996b357b5d4e8d75199f94a89bf73e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59673
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Disable PMEs and clear global PME status to avoid undesired wakeups
or hangs in later stages. These bits are set by OS via ACPI can survive
S5 state so it is necessary to set them back to defaults after an
ungraceful shutdown.
TEST=Dell OptiPlex 9010 does not hang anymore after ungraceful shutdown
when configuring GPE0_EN register in southbridge LPC init
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I790cac3ce1101565b64ed54d9c6b50f5e9aa4cf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IA32_FEATURE_CONTROL does not need to be checked by BIOS, in fact these
bits are needed only by SENTER and SINIT ACM. ACM ENTERACCS does not
check these bits according to Intel SDM. Also noticed that the lock bit
of IA32_FEATURE_CONTROL cannot be cleared by issuing neither global
reset nor full reset on Sandybridge/Ivybridge platforms which results
in a reset loop. However, check the IA32_FEATURE_CONTROL SENTER bits in
ramstage where the register is properly set on all cores already.
TEST=Run ACM SCLEAN on Dell OptiPlex 9010 with i7-3770/Q77
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie9103041498f557b85019a56e1252090a4fcd0c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There is no real code or feature dependency on
CPU_INTEL_FIRMWARE_INTERFACE_TABLE for Intel TXT.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2858c8de9396449a0ee30837a98fab05570a6259
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Although TXT specification says to do power cycle reset if TXT_RESET
is set, all Intel provided implementations issue a global reset here.
TEST=Perform ungraceful shutdown after SENTER to trigger SCLEAN path
on Dell OptiPlex 9010 and successfully call ACM SCLEAN.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ee2400fab20857ff89b14bb7b662a938b775304
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow to set global reset bits on other platforms which enable
SOUTHBRIDGE_INTEL_COMMON_ME. In certain Intel TXT flows global reset
instead of full power cycle reset is needed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I561458044860ee5a26f7d61bcff1c407fa1533f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently there is only a function that dumps GETSEC CAPABILITIES.
Add dumping GETSEC PARAMETER for completeness and additional debug
information.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3b2c8337a8d86000a5b43788840d15146b662598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Region device is no longer used to locate BIOS ACM. Use new CBFS API
to map and unmap the file. Using rdev_munmap on the uninitialized
region device variable causes the platform to jump to a random address.
TEST=Dell OptiPlex 9010 does not raise #UD exception when Intel TXT is
enabled, ACM SCHECK is successful
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I98afba35403d5d2cd9eeb7df6d1ca0171894e9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Implement the chipset production fuse state reporting as described in
the Intel TXT Software Development Guide. Also fix all occurrences
where the production fuse state is checked.
TEST=Dell OptiPlex 9010 with i7-3770/Q77 reports the chipset is
production fused
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic86c5a9e1d162630a1cf61435d1014edabf104b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59514
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Following coreboot's convention, return negative error codes from
platform_i2c_transfer().
BUG=none
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Instead of maintaining two complete Makefiles, reuse the coreboot
build system rules in the stand-alone Makefile.
Change-Id: I5d894a1f079799478bce0bd200ac735097f3806b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59669
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TXT BIOS Data region version is checked by Trusted Boot code. Older
versions of TBoot (e.g. 1.8.2) may refuse to set up the MLE if BDR
version is not known. Provide an option to set the BDR version in
case an older TBoot code is used. This is very useful for platforms
with TPM 1.2.
TEST=Set BDR version to 4 and successfully boot QubesOS 4.0 with
TBoot 1.8.2 on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic2550bd4008559bd47de9e35f8b1c7b52e6e0f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Include DPR in the memory map calculations if enabled. DPR is required
for Intel TXT support.
TEST=Boot Debian 10 and see the DPR memory being reserved in E820 and
cbmem logs:
"BIOS-e820: [mem 0x000000007fc09000-0x00000000829fffff] reserved"
"TSEG base 0x80000000 size 8M"
"DPR base 0x7fd00000 size 3M"
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia22e49ba58709acfa0afe0921aa71d83cc06c129
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We need to report error while rtc_xosc_write() returns false.
TEST=error logs for RTC disappear
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I5fdf4de0383ef373dd45e8d8741aa861c9c4bdc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There is no support for SD card on Corsola reference board, so
we add a configuration to disable SD card initialization to
prevent setting GPIOs in a mistaken way.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On Chromebooks the RAM code is implemented by the resistor straps
that we can read and decode from ADC. For Corsola the RAM code can be
read from ADC channel 2 and 3.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add VPROC12/VSRAM_PROC12 to adjust power for raising little
CPU frequency.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I59b4627220022a51a116716036a8ba0048039508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The types of pwrap_read_field()'s return value and pwrap_write_field()'s
`val` argument are u16, so correct the usage in MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com>
Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Configure Chromebook specific GPIOs, including EC_AP_INT,
EC_IN_RW, GSC_AP_INT, EN_SPK, GPIO_AP, and GPIO_RESET.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I76bde75788889111c0a051eed731dadc9898c0e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some boards with the chrome EC will need to support more than 4
temperature sensors, so modify the number of TSRs supported when
generating the ACPI code. Note that the EC memory map already has
support for up to 16 TSRs, so no change is required on the EC
side.
BUG=b:207585491
TEST=with previous patch and some test data in brya0 overridetree.cb,
dump the SSDT and verify that all of the existing Methods for TSR0-TSR3
are also added for TSR4, as well as all Notify, etc.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards may use more than 4 temperature sensors for DPTF thermal
control, so this patch adds support for one more temperature sensor.
BUG=b:207585491
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Kano EVT will exchange i2c port for touchscreen and cr50.
BUG=b:195853169
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Ensure that the separate Makefile doesn't break.
Change-Id: I0fbe37dc01e46022c5e6de5629eb99f6b86b0b14
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Commit f1e401c6cb70 (util/cbfstool/flashmap/fmap.c: fix fmaptool
endianness bugs on BE) makes use of endianness conversion macros
in cbfstool's FMAP code, which is also used by ifdtool. At least
on Linux, the <endian.h> header provides these helpers, but only
when `__USE_MISC` is defined, which is defined in the <ctypes.h>
header when `_DEFAULT_SOURCE` is defined. This was accounted for
in `Makefile.inc`, but not in `Makefile`. As a result, trying to
build ifdtool as a standalone tool (i.e. not as part of building
a coreboot image) results in build errors because the endianness
conversion macros are not defined.
Define `_DEFAULT_SOURCE` in `Makefile` to fix the build errors.
Change-Id: I8c2bbc07ddd87d885e2d6f5c7f2bd501e5c4e3b0
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59663
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reveal watchdog status value on bootblock stage.
BUG=b:207646327
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In different sku, some unused GPIO pins are processed by NC for power
consumption.
BUG=b:196790249
TEST=emerge-brya coreboot chromeos-bootimage and check power
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enabling crashlog helps partners to debug hang issues efficiently.
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in
depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble
Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Move to building the latest U-Boot.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I33fcfc3135e55d16b0dcd8135217bd5adcef2099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
U-Boot normally runs with a display if available. Enable this option so
that the display shows if U-Boot supports it.
Use 'select' rather than 'imply' since the CI complains.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ie5684c6ead30076689f43034675ff9f3531970fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
At present the default ROM for for QEMU is too small for U-Boot to fit.
Add a condition to catch this and expand it to a 1MB ROM. This allows
booting U-Boot under emulation.
It also matches the size used by other emulation boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
At present U-Boot crashes on entry as the start address is wrong. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I65e32fbb4ffea04b99abe4dc5afccfacd06c986e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59603
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
We don't need all the git history. Speed up the build by doing a shallow
clone.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: If31c9dd158aa23f242e4fd145449ef7502fb1ab1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The u-boot.bin file should be used, rather than u-boot-dtb.bin
While they are often the same, the -dtb version is really just for
legacy use now.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I5558ed94c7dd6cc57ceb835fe367bfa050ad2150
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This doesn't work at present, merely printing an error when U-Boot is
selected as a payload. This is because it adds a file into the U-Boot
tree which makes U-Boot's build system think that the tree is unclean.
Update the rules to put the tag file outside the source tree. Use an
out-of-tree build for U-Boot to avoid changing the source tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: I24d6545b54f97afeefaca3ffed79eec2e7afacb4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Added fw config probe for MX98360A.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I2452b752ce58a5d0f1008cf187fb79ace6c4285f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power
related settings.
Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for
ADL-P 482(28W) and 442(45W).
BUG=b:193864533
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE
clarifies the scope of those definitions. For consistency also add this
prefix to MMIO_DST_FABRIC_ID_SHIFT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register
is bit 12, but that has changed to bit 16 in Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I64c06b84e2c0737b259077e7932f418306638e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change
the name of the define to FCH_AOAC_REF_CLK_OK_STATE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There were only definitions for removing low, high or both glitches, but
not to not remove glitches, so add this too for completeness.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so
change it to DEB_GLITCH_REMOVE which should clarify what this will do.
The description for this value in the PPR/BKDG is "Remove glitch". This
also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the
only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibf7482d20c6d27b2314ec8a31c349eb90c8a8feb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The DPTF parameters were verified by the thermal team.
BUG=b:207463762
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some IDs don't have an associated name. Add them.
Change-Id: I1033dd0cecff417b65001f25f6cc4101b603bd9b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59617
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename `CMBMEM_ID_ACPI_HEST` to `CBMEM_ID_ACPI_HEST`.
Change-Id: I3e680244c9573f566b51298462c324e062ab4657
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59616
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5b47324af368f81288e9e9be65fe0f1ae2fa3697
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Those methods were only in the non-common Stoneyridge GPIO ACPI code
that got dropped, so drop those unused methods too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idf00879701b223ecaca74aef2a51a1b86d2c6ce3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so
we can use the common AMD SoC GPIO ACPI code.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
De-duplicate the definitions for the pin status bit and use this new
definition in both the C and the ACPI code.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The GPIO_WAKE_* definitions are the ones that are used in the code, so
drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move
the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were
before this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622673cc72107908b525a65212061062f32e13dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK,
GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code
so use those instead of magic numbers.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and
GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded
line breaks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|