diff options
Diffstat (limited to 'util')
| -rwxr-xr-x | util/abuild/abuild | 159 | ||||
| -rwxr-xr-x | util/kbuildall/kbuildall | 2 |
2 files changed, 129 insertions, 32 deletions
diff --git a/util/abuild/abuild b/util/abuild/abuild index 00329be6e9..bb43d36829 100755 --- a/util/abuild/abuild +++ b/util/abuild/abuild @@ -5,7 +5,7 @@ # This script builds coreboot images for all available targets. # # (C) 2004 by Stefan Reinauer <stepan@openbios.org> -# (C) 2006-2009 by coresystems GmbH <info@coresystems.de> +# (C) 2006-2010 by coresystems GmbH <info@coresystems.de> # # This file is subject to the terms and conditions of the GNU General # Public License. See the file COPYING in the main directory of this @@ -14,8 +14,8 @@ #set -x # Turn echo on.... -ABUILD_DATE="April 10th, 2009" -ABUILD_VERSION="0.8.1" +ABUILD_DATE="January 29th, 2010" +ABUILD_VERSION="0.9" # Where shall we place all the build trees? TARGET=$( pwd )/coreboot-builds @@ -34,6 +34,8 @@ cpus=1 # Configure-only mode configureonly=0 +# use old config method "newconfig" +oldconfig=0 # One might want to adjust these in case of cross compiling for i in make gmake gnumake nonexistant_make; do @@ -103,7 +105,7 @@ function vendors { # make this a function so we can easily select # without breaking readability - ls -1 "$LBROOT/src/mainboard" | grep -v Kconfig | grep -v Makefile + ls -1 "$ROOT/src/mainboard" | grep -v Kconfig | grep -v Makefile } function mainboards @@ -113,28 +115,34 @@ function mainboards VENDOR=$1 - ls -1 $LBROOT/src/mainboard/$VENDOR | grep -v Kconfig + ls -1 $ROOT/src/mainboard/$VENDOR | grep -v Kconfig } function architecture { VENDOR=$1 MAINBOARD=$2 - ARCH=`cat $LBROOT/src/mainboard/$VENDOR/$MAINBOARD/Config.lb | \ - grep ^arch | cut -f 2 -d\ ` - echo $ARCH | sed s/ppc/powerpc/ + if [ $oldconfig -eq 1 ]; then + ARCH=`cat $ROOT/src/mainboard/$VENDOR/$MAINBOARD/Config.lb | \ + grep ^arch | cut -f 2 -d\ ` + echo $ARCH | sed s/ppc/powerpc/ + else + ARCH=`cat $ROOT/src/mainboard/$VENDOR/$MAINBOARD/Kconfig | \ + grep "select ARCH_"|cut -f2- -d_` + echo $ARCH | sed s/X86/i386/ + fi } -function create_config +function create_config_old { VENDOR=$1 MAINBOARD=$2 CONFIG=$3 TARCH=$( architecture $VENDOR $MAINBOARD ) - TARGCONFIG=$LBROOT/targets/$VENDOR/$MAINBOARD/Config-abuild.lb + TARGCONFIG=$ROOT/targets/$VENDOR/$MAINBOARD/Config-abuild.lb if [ "$CONFIG" != "" ]; then - TARGCONFIG=$LBROOT/targets/$VENDOR/$MAINBOARD/$CONFIG + TARGCONFIG=$ROOT/targets/$VENDOR/$MAINBOARD/$CONFIG fi # get a working payload for the board if we have one. @@ -155,7 +163,6 @@ function create_config printf "Using existing test target $TARGCONFIG" xml " <config>$TARGCONFIG</config>" else - printf " Creating config file..." xml " <config>autogenerated</config>" ( cat << EOF @@ -228,6 +235,79 @@ EOF printf " ok\n" } +function create_config +{ + VENDOR=$1 + MAINBOARD=$2 + CONFIG=$3 + + build_dir=$TARGET/${VENDOR}_${MAINBOARD} + + # get a working payload for the board if we have one. + # the --payload option expects a directory containing + # a shell script payload.sh + # Usage: payload.sh [VENDOR] [DEVICE] + # the script returns an absolute path to the payload binary. + + if [ -f $payloads/payload.sh ]; then + PAYLOAD=`sh $payloads/payload.sh $VENDOR $MAINBOARD` + printf "Using payload $PAYLOAD\n" + fi + + $MAKE distclean obj=${build_dir} + mkdir -p ${build_dir} + + if [ "$CONFIG" != "" ]; then + printf " Using existing configuration $CONFIG ... " + xml " <config>$CONFIG</config>" + cp $CONFIG .config + else + printf " Creating config file... " + xml " <config>autogenerated</config>" + grep "depends[\t ]on[\t ]*VENDOR" src/mainboard/$VENDOR/$MAINBOARD/../Kconfig | \ + sed "s,^.*\(VENDOR_.*\)[^A-Z0-9_]*,CONFIG_\1=y," > .config + grep "config[\t ]*BOARD" src/mainboard/$VENDOR/$MAINBOARD/Kconfig | \ + sed "s,^.*\(BOARD_.*\)[^A-Z0-9_]*,CONFIG_\1=y," >> .config + grep "select[\t ]*ARCH" src/mainboard/$VENDOR/$MAINBOARD/Kconfig | \ + sed "s,^.*\(ARCH_.*\)[^A-Z0-9_]*,CONFIG_\1=y," >> .config + echo "CONFIG_MAINBOARD_DIR=\"$VENDOR/$MAINBOARD\"" >> .config + if [ "$PAYLOAD" != "/dev/null" ]; then + echo "# CONFIG_PAYLOAD_NONE is not set" >> .config + echo "CONFIG_PAYLOAD_ELF=\"$PAYLOAD\"" >> .config + fi + + if [ "$loglevel" != "default" ]; then + printf "(loglevel override) " + echo "CONFIG_MAXIMUM_CONSOLE_LOGLEVEL_$loglevel=y" + echo "CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=$loglevel" + echo "CONFIG_DEFAULT_CONSOLE_LOGLEVEL_$loglevel=y" + echo "CONFIG_DEFAULT_CONSOLE_LOGLEVEL=$loglevel" + fi + fi + + yes "" | $MAKE oldconfig obj=${build_dir} > ${build_dir}/config.log + ret=$? + mv .config.old $TARGET/${VENDOR}_${MAINBOARD}/config.in + if [ $ret -eq 0 ]; then + printf "ok\n" + xml " <builddir>ok</builddir>" + xml " <log>" + xmlfile $build_dir/config.log + xml " </log>" + xml "" + return 0 + else + printf "FAILED! Log excerpt:\n" + xml " <builddir>failed</builddir>" + xml " <log>" + xmlfile $build_dir/config.log + xml " </log>" + xml "" + tail -n $CONTEXT $build_dir/config.log 2> /dev/null || tail -$CONTEXT $build_dir/config.log + return 1 + fi +} + function create_builddir { VENDOR=$1 @@ -236,7 +316,7 @@ function create_builddir printf " Creating builddir..." target_dir=$TARGET - config_dir=$LBROOT/util/newconfig + config_dir=$ROOT/util/newconfig yapps2_py=$config_dir/yapps2.py config_g=$config_dir/config.g config_lb=Config-${VENDOR}_${MAINBOARD}.lb @@ -256,7 +336,7 @@ function create_builddir # make sure config.py is up-to-date export PYTHONPATH=$config_dir - $PYTHON $config_py $config_lb $LBROOT &> $build_dir/config.log + $PYTHON $config_py $config_lb $ROOT &> $build_dir/config.log if [ $? -eq 0 ]; then printf "ok\n" xml " <builddir>ok</builddir>" @@ -282,8 +362,13 @@ function create_buildenv VENDOR=$1 MAINBOARD=$2 CONFIG=$3 - create_config $VENDOR $MAINBOARD $CONFIG - create_builddir $VENDOR $MAINBOARD + if [ $oldconfig -eq 1 ]; then + create_config_old $VENDOR $MAINBOARD $CONFIG + create_builddir $VENDOR $MAINBOARD + else + create_config $VENDOR $MAINBOARD $CONFIG + cp .config $TARGET/${VENDOR}_${MAINBOARD}/coreboot.config + fi } function compile_target @@ -297,10 +382,21 @@ function compile_target test 0$cpus -gt 1 && printf "on %d cpus in parallel .. " $cpus CURR=$( pwd ) - cd $TARGET/${VENDOR}_${MAINBOARD} stime=`perl -e 'print time();'` - eval $MAKE $silent -j $cpus &> make.log - ret=$? + if [ $oldconfig -eq 1 ]; then + cd $TARGET/${VENDOR}_${MAINBOARD} + eval $MAKE $silent -j $cpus &> make.log + ret=$? + else + build_dir=$TARGET/${VENDOR}_${MAINBOARD} + eval $MAKE $silent -j $cpus obj=${build_dir} \ + &> ${build_dir}/make.log + ret=$? + mv .config ${build_dir}/config.build + mv .xcompile ${build_dir}/xcompile.build + mv ..config.tmp ${build_dir}/config.deps + cd $TARGET/${VENDOR}_${MAINBOARD} + fi etime=`perl -e 'print time();'` duration=$(( $etime - $stime )) if [ $ret -eq 0 ]; then @@ -345,7 +441,7 @@ function build_broken { CURR=`pwd` status="yes" - [ -r "$LBROOT/src/mainboard/${VENDOR}/${MAINBOARD}/BROKEN" ] && status="no" + [ -r "$ROOT/src/mainboard/${VENDOR}/${MAINBOARD}/BROKEN" ] && status="no" [ "$buildbroken" == "true" -o "$status" == "yes" ] } @@ -359,8 +455,8 @@ function build_target # Allow architecture override in an abuild.info file. # This is used for the Motorola Sandpoint, which is not a real target # but a skeleton target for the Sandpoint X3. - [ -r "$LBROOT/src/mainboard/${VENDOR}/${MAINBOARD}/abuild.info" ] && \ - source $LBROOT/src/mainboard/${VENDOR}/${MAINBOARD}/abuild.info + [ -r "$ROOT/src/mainboard/${VENDOR}/${MAINBOARD}/abuild.info" ] && \ + source $ROOT/src/mainboard/${VENDOR}/${MAINBOARD}/abuild.info # default setting @@ -573,7 +669,7 @@ function myhelp printf " [-C|--config] configure-only mode\n" printf " [-l|--loglevel <num>] set loglevel\n" printf " [lbroot] absolute path to coreboot sources\n" - printf " (defaults to $LBROOT)\n\n" + printf " (defaults to $ROOT)\n\n" } function myversion @@ -583,7 +679,7 @@ function myversion coreboot autobuild v$ABUILD_VERSION ($ABUILD_DATE) Copyright (C) 2004 by Stefan Reinauer <stepan@openbios.org> -Copyright (C) 2006-2008 by coresystems GmbH <info@coresystems.de> +Copyright (C) 2006-2010 by coresystems GmbH <info@coresystems.de> This program is free software; you may redistribute it under the terms of the GNU General Public License. This program has absolutely no @@ -597,19 +693,19 @@ target="" buildall=false verbose=false -test -f util/newconfig/config.g && LBROOT=$( pwd ) -test -f ../util/newconfig/config.g && LBROOT=$( cd ..; pwd ) -test "$LBROOT" = "" && LBROOT=$( cd ../..; pwd ) +test -f util/newconfig/config.g && ROOT=$( pwd ) +test -f ../util/newconfig/config.g && ROOT=$( cd ..; pwd ) +test "$ROOT" = "" && ROOT=$( cd ../..; pwd ) # parse parameters.. try to find out whether we're running GNU getopt getoptbrand="`getopt -V`" if [ "${getoptbrand:0:6}" == "getopt" ]; then # Detected GNU getopt that supports long options. - args=`getopt -l version,verbose,help,all,target:,broken,payloads:,test,cpus:,silent,xml,config,loglevel Vvhat:bp:Tc:sxCl: -- "$@"` + args=`getopt -l version,verbose,help,all,target:,broken,payloads:,test,cpus:,silent,xml,config,loglevel:,oldconfig Vvhat:bp:Tc:sxCl:o -- "$@"` eval set "$args" else # Detected non-GNU getopt - args=`getopt Vvhat:bp:Tc:sxCl: $*` + args=`getopt Vvhat:bp:Tc:sxCl:o $*` set -- $args fi @@ -636,6 +732,7 @@ while true ; do -sb|--scan-build) shift; scanbuild=true;; -C|--config) shift; configureonly=1;; -l|--loglevel) shift; loglevel="$1"; shift;; + -o|--oldconfig) shift; oldconfig=1;; --) shift; break;; -*) printf "Invalid option\n\n"; myhelp; exit 1;; *) break;; @@ -643,9 +740,9 @@ while true ; do done # /path/to/freebios2/ -test -z "$1" || LBROOT=$1 +test -z "$1" || ROOT=$1 -debug "LBROOT=$LBROOT" +debug "ROOT=$ROOT" xml '<?xml version="1.0" encoding="utf-8"?>' xml '<abuild>' diff --git a/util/kbuildall/kbuildall b/util/kbuildall/kbuildall index 3d16950866..062b590798 100755 --- a/util/kbuildall/kbuildall +++ b/util/kbuildall/kbuildall @@ -61,7 +61,7 @@ for dir in $ALLTARGETS; do result=`$MAKE > $TARGETDIR/$name.buildcoreboot.log 2>&1 && echo ok || echo fail` echo "$result." if [ "$result" = "ok" ]; then - util/abuild/abuild -C -t $dir + util/abuild/abuild -o -C -t $dir sh util/compareboard/compareboard $dir | tee $TARGETDIR/$name.variables.txt fi echo "$dir $result" >> $TARGETDIR/_overview.txt |