diff options
Diffstat (limited to 'util/cbfstool')
| -rw-r--r-- | util/cbfstool/cbfstool.c | 150 |
1 files changed, 82 insertions, 68 deletions
diff --git a/util/cbfstool/cbfstool.c b/util/cbfstool/cbfstool.c index c9db45a22f..87dcbb4ec4 100644 --- a/util/cbfstool/cbfstool.c +++ b/util/cbfstool/cbfstool.c @@ -507,9 +507,10 @@ static int convert_region_offset(unsigned int offset, uint32_t *region_offset) return 0; } -static int do_cbfs_locate(uint32_t *cbfs_addr, size_t metadata_size, - size_t data_size) +static int do_cbfs_locate(uint32_t *cbfs_addr, size_t data_size) { + uint32_t metadata_size = 0; + if (!param.filename) { ERROR("You need to specify -f/--filename.\n"); return 1; @@ -559,6 +560,8 @@ static int do_cbfs_locate(uint32_t *cbfs_addr, size_t metadata_size, } if (param.precompression || param.compression != CBFS_COMPRESS_NONE) metadata_size += sizeof(struct cbfs_file_attr_compression); + if (param.type == CBFS_TYPE_STAGE) + metadata_size += sizeof(struct cbfs_file_attr_stageheader); /* Take care of the hash attribute if it is used */ if (param.hash != VB2_HASH_INVALID) @@ -776,6 +779,11 @@ static int add_topswap_bootblock(struct buffer *buffer, uint32_t *offset) { size_t bb_buf_size = buffer_size(buffer); + if (!param.baseaddress_assigned) { + ERROR("--topswap-size must also have --base-address\n"); + return 1; + } + if (bb_buf_size > param.topswap_size) { ERROR("Bootblock bigger than the topswap boundary\n"); ERROR("size = %zd, ts = %d\n", bb_buf_size, @@ -812,18 +820,37 @@ static int add_topswap_bootblock(struct buffer *buffer, uint32_t *offset) static int cbfs_add_component(const char *filename, const char *name, - uint32_t type, uint32_t headeroffset, convert_buffer_t convert) { - size_t len_align = 0; + /* + * The steps used to determine the final placement offset in CBFS, in order: + * + * 1. If --base-address was passed, that value is used. + * + * 2. The convert() function may write a location back to |offset|, usually by calling + * do_cbfs_locate(). In this case, it needs to ensure that the location found can fit + * the CBFS file in its final form (after any compression and conversion). + * + * 3. If --align was passed and the offset is still undecided at this point, + * do_cbfs_locate() is called to find an appropriately aligned location. + * + * 4. If |offset| is still 0 at the end, cbfs_add_entry() will find the first available + * location that fits. + */ uint32_t offset = param.baseaddress_assigned ? param.baseaddress : 0; + size_t len_align = 0; if (param.alignment && param.baseaddress_assigned) { ERROR("Cannot specify both alignment and base address\n"); return 1; } + if (param.stage_xip && param.compression != CBFS_COMPRESS_NONE) { + ERROR("Cannot specify compression for XIP.\n"); + return 1; + } + if (!filename) { ERROR("You need to specify -f/--filename.\n"); return 1; @@ -834,7 +861,7 @@ static int cbfs_add_component(const char *filename, return 1; } - if (type == 0) { + if (param.type == 0) { ERROR("You need to specify a valid -t/--type.\n"); return 1; } @@ -855,12 +882,12 @@ static int cbfs_add_component(const char *filename, } struct cbfs_file *header = - cbfs_create_file_header(type, buffer.size, name); + cbfs_create_file_header(param.type, buffer.size, name); /* Bootblock and CBFS header should never have file hashes. When adding the bootblock it is important that we *don't* look up the metadata hash yet (before it is added) or we'll cache an outdated result. */ - if (type != CBFS_TYPE_BOOTBLOCK && type != CBFS_TYPE_CBFSHEADER) { + if (param.type != CBFS_TYPE_BOOTBLOCK && param.type != CBFS_TYPE_CBFSHEADER) { enum vb2_hash_algorithm mh_algo = get_mh_cache()->cbfs_hash.algo; if (mh_algo != VB2_HASH_INVALID && param.hash != mh_algo) { if (param.hash == VB2_HASH_INVALID) { @@ -874,16 +901,11 @@ static int cbfs_add_component(const char *filename, } } - /* This needs to run after potentially updating param.hash above. */ - if (param.alignment) - if (do_cbfs_locate(&offset, 0, 0)) - goto error; - /* * Check if Intel CPU topswap is specified this will require a * second bootblock to be added. */ - if (type == CBFS_TYPE_BOOTBLOCK && param.topswap_size) + if (param.type == CBFS_TYPE_BOOTBLOCK && param.topswap_size) if (add_topswap_bootblock(&buffer, &offset)) goto error; @@ -892,7 +914,12 @@ static int cbfs_add_component(const char *filename, goto error; } - /* This needs to run after convert(). */ + /* This needs to run after convert() to take compression into account. */ + if (!offset && param.alignment) + if (do_cbfs_locate(&offset, 0)) + goto error; + + /* This needs to run after convert() to hash the actual final file data. */ if (param.hash != VB2_HASH_INVALID && cbfs_add_file_hash(header, &buffer, param.hash) == -1) { ERROR("couldn't add hash for '%s'\n", name); @@ -1028,45 +1055,44 @@ static int cbfstool_convert_fsp(struct buffer *buffer, { uint32_t address; struct buffer fsp; - int do_relocation = 1; - - address = *offset; /* - * If the FSP component is xip, then ensure that the address is a memory - * mapped one. - * If the FSP component is not xip, then use param.baseaddress that is - * passed in by the caller. + * There are 4 different cases here: + * + * 1. --xip and --base-address: we need to place the binary at the given base address + * in the CBFS image and relocate it to that address. *offset was already filled in. + * + * 2. --xip but no --base-address: we implicitly force a 4K minimum alignment so that + * relocation can occur. Call do_cbfs_locate() here to find an appropriate *offset. + * + * 3. No --xip but a --base-address: special case where --base-address does not have its + * normal meaning, instead we use it as the relocation target address. We explicitly + * reset *offset to 0 so that the file will be placed wherever it fits in CBFS. + * + * 4. No --xip and no --base-address: this means that the FSP was pre-linked and should + * not be relocated. Just chain directly to convert_raw() for compression. */ + if (param.stage_xip) { - if (!IS_HOST_SPACE_ADDRESS(address)) - address = convert_addr_space(param.image_region, address); + if (!param.baseaddress_assigned) { + param.alignment = 4*1024; + if (do_cbfs_locate(offset, 0)) + return -1; + } + if (!IS_HOST_SPACE_ADDRESS(*offset)) + address = convert_addr_space(param.image_region, *offset); + else + address = *offset; } else { if (param.baseaddress_assigned == 0) { - INFO("Honoring pre-linked FSP module.\n"); - do_relocation = 0; + INFO("Honoring pre-linked FSP module, no relocation.\n"); + return cbfstool_convert_raw(buffer, offset, header); } else { address = param.baseaddress; - /* - * *offset should either be 0 or the value returned by - * do_cbfs_locate. do_cbfs_locate is called only when param.baseaddress - * is not provided by user. Thus, set *offset to 0 if user provides - * a baseaddress i.e. params.baseaddress_assigned is set. The only - * requirement in this case is that the binary should be relocated to - * the base address that is requested. There is no requirement on where - * the file ends up in the cbfs. - */ *offset = 0; } } - /* - * Nothing left to do if relocation is not being attempted. Just add - * the file. - */ - if (!do_relocation) - return cbfstool_convert_raw(buffer, offset, header); - /* Create a copy of the buffer to attempt relocation. */ if (buffer_create(&fsp, buffer_size(buffer), "fsp")) return -1; @@ -1100,15 +1126,12 @@ static int cbfstool_convert_mkstage(struct buffer *buffer, uint32_t *offset, } /* - * If we already did a locate for alignment we need to locate again to - * take the stage header into account. XIP stage parsing also needs the - * location. But don't locate in other cases, because it will ignore - * compression (not applied yet) and thus may cause us to refuse adding - * stages that would actually fit once compressed. + * We need a final location for XIP parsing, so we need to call do_cbfs_locate() early + * here. That is okay because XIP stages may not be compressed, so their size cannot + * change anymore at a later point. */ - if ((param.alignment || param.stage_xip) && - do_cbfs_locate(offset, sizeof(struct cbfs_file_attr_stageheader), - data_size)) { + if (param.stage_xip && + do_cbfs_locate(offset, data_size)) { ERROR("Could not find location for stage.\n"); return 1; } @@ -1240,50 +1263,41 @@ static int cbfs_add(void) { convert_buffer_t convert = cbfstool_convert_raw; - /* Set the alignment to 4KiB minimum for FSP blobs when no base address - * is provided so that relocation can occur. */ if (param.type == CBFS_TYPE_FSP) { - if (!param.baseaddress_assigned) - param.alignment = 4*1024; convert = cbfstool_convert_fsp; + } else if (param.type == CBFS_TYPE_STAGE) { + ERROR("stages can only be added with cbfstool add-stage\n"); + return 1; } else if (param.stage_xip) { - ERROR("cbfs add supports xip only for FSP component type\n"); + ERROR("cbfstool add supports xip only for FSP component type\n"); return 1; } return cbfs_add_component(param.filename, param.name, - param.type, param.headeroffset, convert); } static int cbfs_add_stage(void) { - if (param.stage_xip) { - if (param.baseaddress_assigned) { - ERROR("Cannot specify base address for XIP.\n"); - return 1; - } - - if (param.compression != CBFS_COMPRESS_NONE) { - ERROR("Cannot specify compression for XIP.\n"); - return 1; - } + if (param.stage_xip && param.baseaddress_assigned) { + ERROR("Cannot specify base address for XIP.\n"); + return 1; } + param.type = CBFS_TYPE_STAGE; return cbfs_add_component(param.filename, param.name, - CBFS_TYPE_STAGE, param.headeroffset, cbfstool_convert_mkstage); } static int cbfs_add_payload(void) { + param.type = CBFS_TYPE_SELF; return cbfs_add_component(param.filename, param.name, - CBFS_TYPE_SELF, param.headeroffset, cbfstool_convert_mkpayload); } @@ -1300,9 +1314,9 @@ static int cbfs_add_flat_binary(void) "-e/--entry-point.\n"); return 1; } + param.type = CBFS_TYPE_SELF; return cbfs_add_component(param.filename, param.name, - CBFS_TYPE_SELF, param.headeroffset, cbfstool_convert_mkflatpayload); } |