diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/console/uart8250_console.c | 15 | ||||
| -rw-r--r-- | src/lib/uart8250.c | 26 |
2 files changed, 16 insertions, 25 deletions
diff --git a/src/console/uart8250_console.c b/src/console/uart8250_console.c index 03db400319..4799ca66e5 100644 --- a/src/console/uart8250_console.c +++ b/src/console/uart8250_console.c @@ -23,20 +23,7 @@ static void ttyS0_init(void) { - static const unsigned char div[8] = { 1, 2, 3, 6, 12, 24, 48, 96 }; - int b_index = 0; - /* TODO the divisor calculation is hard coded to standard UARTs. Some - * UARTs won't work with these values. This should be a property of the - * UART used, worst case a Kconfig variable. For now live with hard - * codes as the only devices that might be different are the iWave - * iRainbowG6 and the OXPCIe952 card (and the latter is memory mapped) - */ - unsigned int divisor = 115200 / CONFIG_TTYS0_BAUD; - - if (get_option(&b_index, "baud_rate") == 0) { - divisor = div[b_index]; - } - uart8250_init(CONFIG_TTYS0_BASE, divisor); + uart_init(); } static void ttyS0_tx_byte(unsigned char data) diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c index e7a75017a9..cea400eddc 100644 --- a/src/lib/uart8250.c +++ b/src/lib/uart8250.c @@ -85,7 +85,6 @@ void uart8250_init(unsigned base_port, unsigned divisor) outb(CONFIG_TTYS0_LCS, base_port + UART_LCR); } -#if defined(__PRE_RAM__) || defined(__SMM__) void uart_init(void) { /* TODO the divisor calculation is hard coded to standard UARTs. Some @@ -94,16 +93,21 @@ void uart_init(void) * codes as the only devices that might be different are the iWave * iRainbowG6 and the OXPCIe952 card (and the latter is memory mapped) */ -#if CONFIG_USE_OPTION_TABLE && !defined(__SMM__) - static const unsigned char divisor[] = { 1, 2, 3, 6, 12, 24, 48, 96 }; - unsigned ttys0_div, ttys0_index; - ttys0_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); - ttys0_index &= 7; - ttys0_div = divisor[ttys0_index]; - - uart8250_init(CONFIG_TTYS0_BASE, ttys0_div); + unsigned int div = (115200 / CONFIG_TTYS0_BAUD); + +#if !defined(__SMM__) && CONFIG_USE_OPTION_TABLE + static const unsigned char divisor[8] = { 1, 2, 3, 6, 12, 24, 48, 96 }; + unsigned b_index = 0; +#if defined(__PRE_RAM__) + b_index = read_option(CMOS_VSTART_baud_rate, CMOS_VLEN_baud_rate, 0); + b_index &= 7; + div = divisor[ttys0_index]; #else - uart8250_init(CONFIG_TTYS0_BASE, (115200 / CONFIG_TTYS0_BAUD)); + if (get_option(&b_index, "baud_rate") == 0) { + div = divisor[b_index]; + } #endif -} #endif + + uart8250_init(CONFIG_TTYS0_BASE, div); +} |