summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/soc/intel/skylake/Kconfig2
-rw-r--r--src/soc/intel/skylake/Makefile.inc1
-rw-r--r--src/soc/intel/skylake/cpu.c3
-rw-r--r--src/soc/intel/skylake/include/soc/nvs.h5
-rw-r--r--src/soc/intel/skylake/include/soc/pm.h22
-rw-r--r--src/soc/intel/skylake/include/soc/smbus.h3
-rw-r--r--src/soc/intel/skylake/include/soc/smm.h17
-rw-r--r--src/soc/intel/skylake/memmap.c2
-rw-r--r--src/soc/intel/skylake/pei_data.c1
-rw-r--r--src/soc/intel/skylake/smi.c92
-rw-r--r--src/soc/intel/skylake/smihandler.c542
-rw-r--r--src/soc/intel/skylake/smmrelocate.c3
12 files changed, 66 insertions, 627 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index 20665713d9..97ba7af7f2 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -76,6 +76,8 @@ config CPU_SPECIFIC_OPTIONS
select SOC_INTEL_COMMON_BLOCK_SCS
select SOC_INTEL_COMMON_BLOCK_SGX
select SOC_INTEL_COMMON_BLOCK_SMBUS
+ select SOC_INTEL_COMMON_BLOCK_SMM
+ select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
select SOC_INTEL_COMMON_BLOCK_SPI
select SOC_INTEL_COMMON_BLOCK_TIMER
select SOC_INTEL_COMMON_BLOCK_UART
diff --git a/src/soc/intel/skylake/Makefile.inc b/src/soc/intel/skylake/Makefile.inc
index 16f8c065c5..ef95cf7767 100644
--- a/src/soc/intel/skylake/Makefile.inc
+++ b/src/soc/intel/skylake/Makefile.inc
@@ -59,7 +59,6 @@ ramstage-y += pmc.c
ramstage-y += pmutil.c
ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
ramstage-y += sd.c
-ramstage-y += smi.c
ramstage-y += smmrelocate.c
ramstage-y += spi.c
ramstage-y += systemagent.c
diff --git a/src/soc/intel/skylake/cpu.c b/src/soc/intel/skylake/cpu.c
index ca844df07c..291a40da3e 100644
--- a/src/soc/intel/skylake/cpu.c
+++ b/src/soc/intel/skylake/cpu.c
@@ -38,6 +38,7 @@
#include <intelblocks/fast_spi.h>
#include <intelblocks/mp_init.h>
#include <intelblocks/sgx.h>
+#include <intelblocks/smm.h>
#include <pc80/mc146818rtc.h>
#include <soc/cpu.h>
#include <soc/msr.h>
@@ -436,7 +437,7 @@ static void post_mp_init(void)
* Now that all APs have been relocated as well as the BSP let SMIs
* start flowing.
*/
- southbridge_smm_enable_smi();
+ smm_southbridge_enable(GBL_EN);
/* Lock down the SMRAM space. */
#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
diff --git a/src/soc/intel/skylake/include/soc/nvs.h b/src/soc/intel/skylake/include/soc/nvs.h
index da6b2af110..8bc4d8dfe4 100644
--- a/src/soc/intel/skylake/include/soc/nvs.h
+++ b/src/soc/intel/skylake/include/soc/nvs.h
@@ -69,9 +69,4 @@ typedef struct global_nvs_t {
} __packed global_nvs_t;
check_member(global_nvs_t, chromeos, 0x100);
-#if ENV_SMM
-/* Used in SMM to find the ACPI GNVS address */
-global_nvs_t *smm_get_gnvs(void);
-#endif
-
#endif
diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h
index e904658397..b7d6446543 100644
--- a/src/soc/intel/skylake/include/soc/pm.h
+++ b/src/soc/intel/skylake/include/soc/pm.h
@@ -23,6 +23,7 @@
#include <soc/gpe.h>
#include <soc/iomap.h>
#include <soc/pmc.h>
+#include <soc/smbus.h>
/* ACPI_BASE_ADDRESS / PMBASE */
@@ -135,12 +136,25 @@
#define GBLRST_CAUSE0_THERMTRIP (1 << 5)
+/*
+ * Enable SMI generation:
+ * - on APMC writes (io 0xb2)
+ * - on writes to SLP_EN (sleep states)
+ * - on writes to GBL_RLS (bios commands)
+ * - on eSPI events (does nothing on LPC systems)
+ * No SMIs:
+ * - on microcontroller writes (io 0x62/0x66)
+ * - on TCO events
+ */
+#define ENABLE_SMI_PARAMS \
+ (APMC_EN | SLP_SMI_EN | GBL_SMI_EN | ESPI_SMI_EN | EOS)
+
/* This is defined as ETR3 in EDS. We named it as ETR here for consistency */
-#define ETR 0xac
-#define CF9_LOCK (1 << 31)
-#define CF9_GLB_RST (1 << 20)
+#define ETR 0xac
+#define CF9_LOCK (1 << 31)
+#define CF9_GLB_RST (1 << 20)
-#define PRSTS 0x10
+#define PRSTS 0x10
struct chipset_power_state {
uint16_t pm1_sts;
diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h
index ad5ae2611c..aeaf1d9ea2 100644
--- a/src/soc/intel/skylake/include/soc/smbus.h
+++ b/src/soc/intel/skylake/include/soc/smbus.h
@@ -4,7 +4,7 @@
* Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
* Copyright (C) 2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
- * Copyright (C) 2015 Intel Corporation.
+ * Copyright (C) 2015-2017 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */
#define TCO1_STS 0x04
+#define TCO_TIMEOUT (1 << 3)
#define TCO2_STS 0x06
#define TCO2_STS_SECOND_TO 0x02
#define TCO2_STS_BOOT 0x04
diff --git a/src/soc/intel/skylake/include/soc/smm.h b/src/soc/intel/skylake/include/soc/smm.h
index 06c4aacd3d..0f857e05ce 100644
--- a/src/soc/intel/skylake/include/soc/smm.h
+++ b/src/soc/intel/skylake/include/soc/smm.h
@@ -21,6 +21,7 @@
#include <compiler.h>
#include <cpu/x86/msr.h>
#include <fsp/memmap.h>
+#include <intelblocks/smihandler.h>
#include <soc/gpio.h>
struct ied_header {
@@ -48,12 +49,6 @@ struct smm_relocation_params {
int smm_save_state_in_msrs;
};
-/* Mainboard handler for GPI SMIs*/
-void mainboard_smi_gpi_handler(const struct gpi_status *sts);
-
-/* Mainboard handler for eSPI SMIs */
-void mainboard_smi_espi_handler(void);
-
#if IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)
void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
uintptr_t staggered_smbase);
@@ -61,14 +56,6 @@ void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
size_t *smm_save_state_size);
void smm_initialize(void);
void smm_relocate(void);
-
-/*
- * The initialization of the southbridge is split into 2 compoments. One is
- * for clearing the state in the SMM registers. The other is for enabling
- * SMIs.
- */
-void southbridge_smm_clear_state(void);
-void southbridge_smm_enable_smi(void);
#else /* CONFIG_HAVE_SMI_HANDLER */
static inline void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
uintptr_t staggered_smbase) {}
@@ -77,8 +64,6 @@ static inline void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
static inline void smm_initialize(void) {}
static inline void smm_relocate(void) {}
-static inline void southbridge_smm_clear_state(void) {}
-static inline void southbridge_smm_enable_smi(void) {}
#endif /* CONFIG_HAVE_SMI_HANDLER */
#endif
diff --git a/src/soc/intel/skylake/memmap.c b/src/soc/intel/skylake/memmap.c
index b7be21a9c7..c5dc8ac9af 100644
--- a/src/soc/intel/skylake/memmap.c
+++ b/src/soc/intel/skylake/memmap.c
@@ -21,11 +21,11 @@
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
+#include <fsp/memmap.h>
#include <intelblocks/ebda.h>
#include <intelblocks/systemagent.h>
#include <soc/msr.h>
#include <soc/pci_devs.h>
-#include <soc/smm.h>
#include <soc/systemagent.h>
#include <stdlib.h>
diff --git a/src/soc/intel/skylake/pei_data.c b/src/soc/intel/skylake/pei_data.c
index 43409ef885..8b840c9853 100644
--- a/src/soc/intel/skylake/pei_data.c
+++ b/src/soc/intel/skylake/pei_data.c
@@ -25,7 +25,6 @@
#include <soc/pci_devs.h>
#include <soc/pei_data.h>
#include <soc/pei_wrapper.h>
-#include <soc/smm.h>
static void ABI_X86 send_to_console(unsigned char b)
{
diff --git a/src/soc/intel/skylake/smi.c b/src/soc/intel/skylake/smi.c
deleted file mode 100644
index 67c3bb8e48..0000000000
--- a/src/soc/intel/skylake/smi.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- * Copyright (C) 2014 Google Inc.
- * Copyright (C) 2015 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <bootstate.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <console/console.h>
-#include <arch/io.h>
-#include <cpu/cpu.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include <intelblocks/pmclib.h>
-#include <string.h>
-#include <soc/iomap.h>
-#include <soc/pch.h>
-#include <soc/pm.h>
-#include <soc/smm.h>
-
-void southbridge_smm_clear_state(void)
-{
- u32 smi_en;
-
- printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
- printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", ACPI_BASE_ADDRESS);
-
- smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN);
- if (smi_en & APMC_EN) {
- printk(BIOS_INFO, "SMI# handler already enabled?\n");
- return;
- }
-
- printk(BIOS_DEBUG, "\n");
-
- /* Dump and clear status registers */
- pmc_clear_smi_status();
- pmc_clear_pm1_status();
- pmc_clear_tco_status();
- pmc_clear_all_gpe_status();
-}
-
-void southbridge_smm_enable_smi(void)
-{
- printk(BIOS_DEBUG, "Enabling SMIs.\n");
- /* Configure events */
- pmc_enable_pm1(GBL_EN);
- pmc_disable_std_gpe(PME_B0_EN);
-
- /*
- * Enable SMI generation:
- * - on APMC writes (io 0xb2)
- * - on writes to SLP_EN (sleep states)
- * - on writes to GBL_RLS (bios commands)
- * - on eSPI events (does nothing on LPC systems)
- * No SMIs:
- * - on microcontroller writes (io 0x62/0x66)
- * - on TCO events
- */
- pmc_enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | ESPI_SMI_EN | EOS);
-}
-
-void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
-{
- /*
- * Issue SMI to set the gnvs pointer in SMM.
- * tcg and smi1 are unused.
- *
- * EAX = APM_CNT_GNVS_UPDATE
- * EBX = gnvs pointer
- * EDX = APM_CNT
- */
- asm volatile (
- "outb %%al, %%dx\n\t"
- : /* ignore result */
- : "a" (APM_CNT_GNVS_UPDATE),
- "b" ((u32)gnvs),
- "d" (APM_CNT)
- );
-}
diff --git a/src/soc/intel/skylake/smihandler.c b/src/soc/intel/skylake/smihandler.c
index 9ec6b87ca6..6e0054b030 100644
--- a/src/soc/intel/skylake/smihandler.c
+++ b/src/soc/intel/skylake/smihandler.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2008-2009 coresystems GmbH
* Copyright (C) 2014 Google Inc.
- * Copyright (C) 2015 Intel Corporation.
+ * Copyright (C) 2015-2017 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -15,521 +15,55 @@
* GNU General Public License for more details.
*/
-#include <arch/hlt.h>
-#include <arch/io.h>
#include <console/console.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include <device/pci_def.h>
-#include <elog.h>
#include <intelblocks/fast_spi.h>
-#include <intelblocks/pcr.h>
-#include <intelblocks/uart.h>
-#include <intelblocks/pmclib.h>
-#include <delay.h>
-#include <device/pci_def.h>
-#include <elog.h>
-#include <pc80/mc146818rtc.h>
-#include <spi-generic.h>
-#include <soc/iomap.h>
-#include <soc/nvs.h>
-#include <soc/pci_devs.h>
-#include <soc/pch.h>
-#include <soc/pcr_ids.h>
+#include <intelblocks/smihandler.h>
#include <soc/pm.h>
-#include <soc/pmc.h>
-#include <soc/smm.h>
-#include <types.h>
-/* IO Trap PCRs */
-/* Trap status Register */
-#define PCR_PSTH_TRPST 0x1E00
-/* Trapped cycle */
-#define PCR_PSTH_TRPC 0x1E10
-/* Trapped write data */
-#define PCR_PSTH_TRPD 0x1E18
-
-static u8 smm_initialized = 0;
-
-/*
- * GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
- * by coreboot.
- */
-static global_nvs_t *gnvs;
-global_nvs_t *smm_get_gnvs(void)
-{
- return gnvs;
-}
-
-int southbridge_io_trap_handler(int smif)
-{
- switch (smif) {
- case 0x32:
- printk(BIOS_DEBUG, "OS Init\n");
- /*
- * gnvs->smif:
- * - On success, the IO Trap Handler returns 0
- * - On failure, the IO Trap Handler returns a value != 0
- */
- gnvs->smif = 0;
- return 1; /* IO trap handled */
- }
-
- /* Not handled */
- return 0;
-}
-
-/* Set the EOS bit */
-void southbridge_smi_set_eos(void)
-{
- pmc_enable_smi(EOS);
-}
-
-static void busmaster_disable_on_bus(int bus)
-{
- int slot, func;
- unsigned int val;
- unsigned char hdr;
-
- for (slot = 0; slot < 0x20; slot++) {
- for (func = 0; func < 8; func++) {
- u32 reg32;
- device_t dev = PCI_DEV(bus, slot, func);
-
- val = pci_read_config32(dev, PCI_VENDOR_ID);
-
- if (val == 0xffffffff || val == 0x00000000 ||
- val == 0x0000ffff || val == 0xffff0000)
- continue;
-
- /* Disable Bus Mastering for this one device */
- reg32 = pci_read_config32(dev, PCI_COMMAND);
- reg32 &= ~PCI_COMMAND_MASTER;
- pci_write_config32(dev, PCI_COMMAND, reg32);
-
- /* If this is a bridge, then follow it. */
- hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
- hdr &= 0x7f;
- if (hdr == PCI_HEADER_TYPE_BRIDGE ||
- hdr == PCI_HEADER_TYPE_CARDBUS) {
- unsigned int buses;
- buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
- busmaster_disable_on_bus((buses >> 8) & 0xff);
- }
- }
- }
-}
-
-static void southbridge_smi_sleep(void)
-{
- u32 reg32;
- u8 slp_typ;
-
- /* First, disable further SMIs */
- pmc_disable_smi(SLP_SMI_EN);
-
- /* Figure out SLP_TYP */
- reg32 = pmc_read_pm1_control();
- printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
- slp_typ = acpi_sleep_from_pm1(reg32);
-
- /* Do any mainboard sleep handling */
- mainboard_smi_sleep(slp_typ);
-
- if (IS_ENABLED(CONFIG_ELOG_GSMI))
- /* Log S3, S4, and S5 entry */
- if (slp_typ >= ACPI_S3)
- elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ);
-
- /* Clear pending GPE events */
- pmc_clear_all_gpe_status();
-
- /* Next, do the deed. */
- switch (slp_typ) {
- case ACPI_S0:
- printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
- break;
- case ACPI_S1:
- printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n");
- break;
- case ACPI_S3:
- printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
-
- gnvs->uior = uart_debug_controller_is_initialized();
-
- /* Invalidate the cache before going to S3 */
- wbinvd();
- break;
- case ACPI_S5:
- printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
- /* Disable all GPE */
- pmc_disable_all_gpe();
-
- pmc_soc_restore_power_failure();
-
- /* also iterates over all bridges on bus 0 */
- busmaster_disable_on_bus(0);
- break;
- default:
- printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n");
- break;
- }
-
- /*
- * Write back to the SLP register to cause the originally intended
- * event again. We need to set BIT13 (SLP_EN) though to make the
- * sleep happen.
- */
- pmc_enable_pm1_control(SLP_EN);
-
- /* Make sure to stop executing code here for S3/S4/S5 */
- if (slp_typ >= ACPI_S3)
- hlt();
-
- /*
- * In most sleep states, the code flow of this function ends at
- * the line above. However, if we entered sleep state S1 and wake
- * up again, we will continue to execute code in this function.
- */
- if (pmc_read_pm1_control() & SCI_EN) {
- /* The OS is not an ACPI OS, so we set the state to S0 */
- pmc_disable_pm1_control(SLP_EN | SLP_TYP);
- }
-}
-
-/*
- * Look for Synchronous IO SMI and use save state from that
- * core in case we are not running on the same core that
- * initiated the IO transaction.
- */
-static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd)
-{
- em64t101_smm_state_save_area_t *state;
- int node;
-
- /* Check all nodes looking for the one that issued the IO */
- for (node = 0; node < CONFIG_MAX_CPUS; node++) {
- state = smm_get_save_state(node);
-
- /* Check for Synchronous IO (bit0==1) */
- if (!(state->io_misc_info & (1 << 0)))
- continue;
-
- /* Make sure it was a write (bit4==0) */
- if (state->io_misc_info & (1 << 4))
- continue;
-
- /* Check for APMC IO port */
- if (((state->io_misc_info >> 16) & 0xff) != APM_CNT)
- continue;
-
- /* Check AX against the requested command */
- if ((state->rax & 0xff) != cmd)
- continue;
-
- return state;
- }
-
- return NULL;
-}
-
-static void southbridge_smi_gsmi(void)
-{
-#if IS_ENABLED(CONFIG_ELOG_GSMI)
- u32 *ret, *param;
- u8 sub_command;
- em64t101_smm_state_save_area_t *io_smi =
- smi_apmc_find_state_save(ELOG_GSMI_APM_CNT);
-
- if (!io_smi)
- return;
-
- /* Command and return value in EAX */
- ret = (u32 *)&io_smi->rax;
- sub_command = (u8)(*ret >> 8);
-
- /* Parameter buffer in EBX */
- param = (u32 *)&io_smi->rbx;
-
- /* drivers/elog/gsmi.c */
- *ret = gsmi_exec(sub_command, param);
-#endif
-}
-
-static void finalize(void)
-{
- static int finalize_done;
-
- if (finalize_done) {
- printk(BIOS_DEBUG, "SMM already finalized.\n");
- return;
- }
- finalize_done = 1;
-
- if (IS_ENABLED(CONFIG_SPI_FLASH_SMM))
- /* Re-init SPI driver to handle locked BAR */
- fast_spi_init();
-}
-
-static void southbridge_smi_apmc(void)
-{
- u8 reg8;
- em64t101_smm_state_save_area_t *state;
-
- /* Emulate B2 register as the FADT / Linux expects it */
-
- reg8 = inb(APM_CNT);
- switch (reg8) {
- case APM_CNT_PST_CONTROL:
- printk(BIOS_DEBUG, "P-state control\n");
- break;
- case APM_CNT_ACPI_DISABLE:
- pmc_disable_pm1_control(SCI_EN);
- printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
- break;
- case APM_CNT_ACPI_ENABLE:
- pmc_enable_pm1_control(SCI_EN);
- printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
- break;
- case APM_CNT_FINALIZE:
- finalize();
- break;
- case APM_CNT_GNVS_UPDATE:
- if (smm_initialized) {
- printk(BIOS_DEBUG,
- "SMI#: SMM structures already initialized!\n");
- return;
- }
- state = smi_apmc_find_state_save(reg8);
- if (state) {
- /* EBX in the state save contains the GNVS pointer */
- gnvs = (global_nvs_t *)((u32)state->rbx);
- smm_initialized = 1;
- printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
- }
- break;
- case ELOG_GSMI_APM_CNT:
- if (IS_ENABLED(CONFIG_ELOG_GSMI))
- southbridge_smi_gsmi();
- break;
- }
-
- mainboard_smi_apmc(reg8);
-}
-
-static void southbridge_smi_pm1(void)
-{
- u16 pm1_sts = pmc_clear_pm1_status();
- u16 pm1_en = pmc_read_pm1_enable();
-
- /*
- * While OSPM is not active, poweroff immediately on a power button
- * event.
- */
- if ((pm1_sts & PWRBTN_STS) && (pm1_en & PWRBTN_EN)) {
- /* power button pressed */
- if (IS_ENABLED(CONFIG_ELOG_GSMI))
- elog_add_event(ELOG_TYPE_POWER_BUTTON);
- pmc_disable_pm1_control(-1UL);
- pmc_enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10));
- }
-}
-
-static void southbridge_smi_gpe0(void)
-{
- pmc_clear_all_gpe_status();
-}
-
-void __attribute__((weak))
-mainboard_smi_gpi_handler(const struct gpi_status *sts) { }
-
-static void southbridge_smi_gpi(void)
-{
- struct gpi_status smi_sts;
-
- gpi_clear_get_smi_status(&smi_sts);
- mainboard_smi_gpi_handler(&smi_sts);
-
- /* Clear again after mainboard handler */
- gpi_clear_get_smi_status(&smi_sts);
-}
-
-void __attribute__((weak)) mainboard_smi_espi_handler(void) { }
-static void southbridge_smi_espi(void)
-{
- mainboard_smi_espi_handler();
-}
-
-static void southbridge_smi_mc(void)
-{
- u32 reg32 = inl(ACPI_BASE_ADDRESS + SMI_EN);
-
- /* Are microcontroller SMIs enabled? */
- if ((reg32 & MCSMI_EN) == 0)
- return;
-
- printk(BIOS_DEBUG, "Microcontroller SMI.\n");
-}
-
-static void southbridge_smi_tco(void)
-{
- u32 tco_sts = pmc_clear_tco_status();
-
- /* Any TCO event? */
- if (!tco_sts)
- return;
-
- if (tco_sts & (1 << 8)) { /* BIOSWR */
- if (IS_ENABLED(CONFIG_SPI_FLASH_SMM)) {
- if (fast_spi_wpd_status()) {
- /*
- * BWE is RW, so the SMI was caused by a
- * write to BWE, not by a write to the BIOS
- *
- * This is the place where we notice someone
- * is trying to tinker with the BIOS. We are
- * trying to be nice and just ignore it. A more
- * resolute answer would be to power down the
- * box.
- */
- printk(BIOS_DEBUG, "Switching back to RO\n");
- fast_spi_enable_wp();
- } /* No else for now? */
- }
- } else if (tco_sts & (1 << 3)) { /* TIMEOUT */
- /* Handle TCO timeout */
- printk(BIOS_DEBUG, "TCO Timeout.\n");
- }
-}
-
-static void southbridge_smi_periodic(void)
+const struct smm_save_state_ops *get_smm_save_state_ops(void)
{
- u32 reg32 = inl(ACPI_BASE_ADDRESS + SMI_EN);
-
- /* Are periodic SMIs enabled? */
- if ((reg32 & PERIODIC_EN) == 0)
- return;
-
- printk(BIOS_DEBUG, "Periodic SMI.\n");
+ return &em64t101_smm_ops;
}
-static void southbridge_smi_monitor(void)
+void smihandler_check_illegal_access(uint32_t tco_sts)
{
-#define IOTRAP(x) (trap_sts & (1 << x))
- u32 trap_cycle;
- u32 data, mask = 0;
- u8 trap_sts;
- int i;
- /* TRSR - Trap Status Register */
- trap_sts = pcr_read8(PID_PSTH, PCR_PSTH_TRPST);
- /* Clear trap(s) in TRSR */
- pcr_write8(PID_PSTH, PCR_PSTH_TRPST, trap_sts);
-
- /* TRPC - Trapped cycle */
- trap_cycle = pcr_read32(PID_PSTH, PCR_PSTH_TRPC);
- for (i = 16; i < 20; i++) {
- if (trap_cycle & (1 << i))
- mask |= (0xff << ((i - 16) << 2));
- }
-
-
- /* IOTRAP(3) SMI function call */
- if (IOTRAP(3)) {
- if (gnvs && gnvs->smif)
- io_trap_handler(gnvs->smif); /* call function smif */
+ if (!((tco_sts & (1 << 8)) && IS_ENABLED(CONFIG_SPI_FLASH_SMM)
+ && fast_spi_wpd_status()))
return;
- }
/*
- * IOTRAP(2) currently unused
- * IOTRAP(1) currently unused
+ * BWE is RW, so the SMI was caused by a
+ * write to BWE, not by a write to the BIOS
+ *
+ * This is the place where we notice someone
+ * is trying to tinker with the BIOS. We are
+ * trying to be nice and just ignore it. A more
+ * resolute answer would be to power down the
+ * box.
*/
-
- /* IOTRAP(0) SMIC */
- if (IOTRAP(0)) {
- if (!(trap_cycle & (1 << 24))) { /* It's a write */
- printk(BIOS_DEBUG, "SMI1 command\n");
- /* Trapped write data */
- data = pcr_read32(PID_PSTH, PCR_PSTH_TRPD);
- data &= mask;
- }
- }
-
- printk(BIOS_DEBUG, " trapped io address = 0x%x\n",
- trap_cycle & 0xfffc);
- for (i = 0; i < 4; i++)
- if (IOTRAP(i))
- printk(BIOS_DEBUG, " TRAP = %d\n", i);
- printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
- printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
- printk(BIOS_DEBUG, " read/write: %s\n",
- (trap_cycle & (1 << 24)) ? "read" : "write");
-
- if (!(trap_cycle & (1 << 24))) {
- /* Write Cycle */
- data = pcr_read32(PID_PSTH, PCR_PSTH_TRPD);
- printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data);
- }
-#undef IOTRAP
+ printk(BIOS_DEBUG, "Switching back to RO\n");
+ fast_spi_enable_wp();
}
-typedef void (*smi_handler_t)(void);
-
-static smi_handler_t southbridge_smi[SMI_STS_BITS] = {
- [SMI_ON_SLP_EN_STS_BIT] = southbridge_smi_sleep,
- [APM_STS_BIT] = southbridge_smi_apmc,
- [PM1_STS_BIT] = southbridge_smi_pm1,
- [GPE0_STS_BIT] = southbridge_smi_gpe0,
- [GPIO_STS_BIT] = southbridge_smi_gpi,
- [ESPI_SMI_STS_BIT] = southbridge_smi_espi,
- [MCSMI_STS_BIT] = southbridge_smi_mc,
- [TCO_STS_BIT] = southbridge_smi_tco,
- [PERIODIC_STS_BIT] = southbridge_smi_periodic,
- [MONITOR_STS_BIT] = southbridge_smi_monitor,
-};
-
-#define SMI_HANDLER_SCI_EN(__bit) (1 << (__bit))
-
/* SMI handlers that should be serviced in SCI mode too. */
-uint32_t smi_handler_sci_mask =
- SMI_HANDLER_SCI_EN(APM_STS_BIT) |
- SMI_HANDLER_SCI_EN(SMI_ON_SLP_EN_STS_BIT);
-
-/*
- * Interrupt handler for SMI#
- */
-void southbridge_smi_handler(void)
-{
- int i;
- u32 smi_sts;
-
- /*
- * We need to clear the SMI status registers, or we won't see what's
- * happening in the following calls.
- */
- smi_sts = pmc_clear_smi_status();
-
- /*
- * In SCI mode, execute only those SMI handlers that have
- * declared themselves as available for service in that mode
- * using smi_handler_sci_mask.
- */
- if (pmc_read_pm1_control() & SCI_EN)
- smi_sts &= smi_handler_sci_mask;
-
- if (!smi_sts)
- return;
-
- /* Call SMI sub handler for each of the status bits */
- for (i = 0; i < ARRAY_SIZE(southbridge_smi); i++) {
- if (smi_sts & (1 << i)) {
- if (southbridge_smi[i]) {
- southbridge_smi[i]();
- } else {
- printk(BIOS_DEBUG,
- "SMI_STS[%d] occurred, but no handler available.\n",
- i);
- }
- }
- }
-}
+uint32_t smi_handler_get_sci_mask(void)
+{
+ uint32_t sci_mask =
+ SMI_HANDLER_SCI_EN(APM_STS_BIT) |
+ SMI_HANDLER_SCI_EN(SMI_ON_SLP_EN_STS_BIT);
+
+ return sci_mask;
+}
+
+const smi_handler_t southbridge_smi[SMI_STS_BITS] = {
+ [SMI_ON_SLP_EN_STS_BIT] = smihandler_southbridge_sleep,
+ [APM_STS_BIT] = smihandler_southbridge_apmc,
+ [PM1_STS_BIT] = smihandler_southbridge_pm1,
+ [GPE0_STS_BIT] = smihandler_southbridge_gpe0,
+ [GPIO_STS_BIT] = smihandler_southbridge_gpi,
+ [ESPI_SMI_STS_BIT] = smihandler_southbridge_espi,
+ [MCSMI_STS_BIT] = smihandler_southbridge_mc,
+ [TCO_STS_BIT] = smihandler_southbridge_tco,
+ [PERIODIC_STS_BIT] = smihandler_southbridge_periodic,
+ [MONITOR_STS_BIT] = smihandler_southbridge_monitor,
+};
diff --git a/src/soc/intel/skylake/smmrelocate.c b/src/soc/intel/skylake/smmrelocate.c
index dbe0c9485b..b477b11752 100644
--- a/src/soc/intel/skylake/smmrelocate.c
+++ b/src/soc/intel/skylake/smmrelocate.c
@@ -26,6 +26,7 @@
#include <cpu/x86/mtrr.h>
#include <cpu/x86/smm.h>
#include <console/console.h>
+#include <intelblocks/smm.h>
#include <soc/cpu.h>
#include <soc/msr.h>
#include <soc/pci_devs.h>
@@ -281,7 +282,7 @@ void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
void smm_initialize(void)
{
/* Clear the SMM state in the southbridge. */
- southbridge_smm_clear_state();
+ smm_southbridge_clear_state();
/*
* Run the relocation handler for on the BSP to check and set up