diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/cpu/amd/sc520/raminit.c | 107 | ||||
| -rw-r--r-- | src/mainboard/digitallogic/msm586seg/auto.c | 4 |
2 files changed, 98 insertions, 13 deletions
diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c index 30938d26cc..c04d9e98ce 100644 --- a/src/cpu/amd/sc520/raminit.c +++ b/src/cpu/amd/sc520/raminit.c @@ -54,7 +54,7 @@ #define drcmctl (( volatile unsigned char *)0xfffef012) #define drccfg (( volatile unsigned char *)0xfffef014) -#define drcbendadr (( volatile unsigned char *)0xfffef018) +#define drcbendadr (( volatile unsigned long *)0xfffef018) #define eccctl (( volatile unsigned char *)0xfffef020) #define dbctl (( volatile unsigned char *)0xfffef040) void @@ -71,11 +71,20 @@ setupsc520(void){ /* no, that did not help. I wonder what will? * outl(0x800df0cb, 0xfffc); */ + /* well, this is special! You have to do SHORT writes to the locations, + * even though they are CHAR in size and CHAR aligned and technically, a + * SHORT write will result in -- yoo ha! -- over writing the next location! + * Thanks to the u-boot guys for a reference code I can use. + * with these short pointers, it now reliably comes up after power cycle + * with printk. Ah yi yi. + */ /* turn off the write buffer*/ - cp = (unsigned char *)0xfffef040; - *cp = 0; + /* per the note above, make this a short? Let's try it. + */ + sp = (unsigned short *)0xfffef040; + *sp = 0; /* byte writes in AMD assembly */ /* we do short anyway, since u-boot does ... */ @@ -243,7 +252,18 @@ static void dumpram(void){ print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\r\n"); print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\r\n"); } -#ifdef FUCK + +/* there is a lot of silliness in the amd code, and it is + * causing romcc real headaches, so we're going to be be a little + * less silly. + * so, the order of ops is: + * for in 3 to 0 + * see if bank is there. + * if we can write a word, and read it back, to hell with paranoia + * the bank is there. So write the magic byte, read it back, and + * use that to get size, etc. Try to keep things very simple, + * so people can actually follow the damned code. + */ /* cache is assumed to be disabled */ int sizemem(void) @@ -251,25 +271,87 @@ int sizemem(void) int rows,banks, cols, i, bank; unsigned char al; - + volatile unsigned long *lp = (volatile unsigned long *) CACHELINESZ; + unsigned long l; /* initialize dram controller registers */ *dbctl = 0; /* disable write buffer/read-ahead buffer */ *eccctl = 0; *drcmctl = 0x1e; /* Set SDRAM timing for slowest speed. */ + /* setup dram register for all banks + * with max cols and max banks + */ + *drccfg=0xbbbb; /* setup loop to do 4 external banks starting with bank 3 */ - print_err("sizemem\n"); + *drcbendadr=0x0ff000000; + /* issue a NOP to all DRAMs */ + /* Setup DRAM control register with Disable refresh, + * disable write buffer Test Mode and NOP command select + */ + *drcctl=0x01; + + /* dummy write for NOP to take effect */ + dummy_write(); + print_err("NOP\n"); + /* 100? 200? */ + //sc520_udelay(100); + print_err("after sc520_udelay\r\n"); + + /* issue all banks precharge */ + *drcctl=0x02; + print_err("set *drcctl to 2 \r\n"); + dummy_write(); + print_err("PRE\n"); + + /* issue 2 auto refreshes to all banks */ + *drcctl=0x04; + dummy_write(); + print_err("AUTO1\n"); + dummy_write(); + print_err("AUTO2\n"); + + /* issue LOAD MODE REGISTER command */ + *drcctl=0x03; + dummy_write(); + print_err("LOAD MODE REG\n"); + + *drcctl=0x04; + for (i=0; i<8; i++) /* refresh 8 times */{ + dummy_write(); + print_err("dummy write\r\n"); + } + print_err("8 dummy writes\n"); + /* set control register to NORMAL mode */ + *drcctl=0x00; + print_err("normal\n"); + + print_err("HI done normal\r\n"); + + print_err("sizemem\n"); + for(bank = 3; bank >= 0; bank--) { + print_err("Try to assign to l\r\n"); + *lp = 0xdeadbeef; + print_err("assigned l ... \r\n"); + if (*lp != 0xdeadbeef) { + print_err(" no memory at bank "); + // print_err_hex8(bank); + // print_err(" value "); print_err_hex32(*lp); + print_err("\r\n"); + // continue; + } + l = *drcbendadr; + l >>= 8; + *drcbendadr = l; + print_err("loop around\r\n"); + } +#if 0 /* enable last bank and setup ending address * register for max ram in last bank */ *drcbendadr=0x0ff000000; - /* setup dram register for all banks - * with max cols and max banks - */ - *drccfg=0xbbbb; // dumpram(); @@ -499,10 +581,11 @@ bad_ram: goto bad_reinit; while(1) print_err("DONE NEXTBANK\r\n"); -} #endif -/* note: based on AMD code, but AMD code is BROKEN AFAIK */ +} +/* note: based on AMD code, but AMD code is BROKEN AFAIK */ +/* this does now work worth shit. */ int staticmem(void){ volatile unsigned char *zero = (unsigned char *) 0; diff --git a/src/mainboard/digitallogic/msm586seg/auto.c b/src/mainboard/digitallogic/msm586seg/auto.c index 68013f87ee..c688569821 100644 --- a/src/mainboard/digitallogic/msm586seg/auto.c +++ b/src/mainboard/digitallogic/msm586seg/auto.c @@ -53,8 +53,10 @@ static void main(unsigned long bist) console_init(); // while(1) print_err("HI THERE!\r\n"); -// sizemem(); + sizemem(); // staticmem(); + + while(1) print_err("STATIC MEM DONE\r\n"); #if 0 |