diff options
Diffstat (limited to 'src')
19 files changed, 29 insertions, 33 deletions
diff --git a/src/mainboard/amd/mahogany_fam10/spd_addr.h b/src/mainboard/amd/mahogany_fam10/spd_addr.h index c87a5995b8..489fa3330a 100644 --- a/src/mainboard/amd/mahogany_fam10/spd_addr.h +++ b/src/mainboard/amd/mahogany_fam10/spd_addr.h @@ -19,7 +19,7 @@ /** * This file defines the SPD addresses for the mainboard. Must be included in - * cache_as_ram_auto.c + * romstage.c */ #define RC00 0 diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c index 841c8a246e..e957d7ea94 100644 --- a/src/mainboard/amd/norwich/romstage.c +++ b/src/mainboard/amd/norwich/romstage.c @@ -77,7 +77,7 @@ void main(unsigned long bist) /* cs5536_disable_internal_uart: disable them for now, set them * up later... */ - /* If debug. real setup done in chipset init via Config.lb. */ + /* If debug. real setup done in chipset init via devicetree.cb. */ cs5536_setup_onchipuart(1); mb_gpio_init(); uart_init(); diff --git a/src/mainboard/amd/tilapia_fam10/spd_addr.h b/src/mainboard/amd/tilapia_fam10/spd_addr.h index c87a5995b8..489fa3330a 100644 --- a/src/mainboard/amd/tilapia_fam10/spd_addr.h +++ b/src/mainboard/amd/tilapia_fam10/spd_addr.h @@ -19,7 +19,7 @@ /** * This file defines the SPD addresses for the mainboard. Must be included in - * cache_as_ram_auto.c + * romstage.c */ #define RC00 0 diff --git a/src/mainboard/asus/m4a785-m/spd_addr.h b/src/mainboard/asus/m4a785-m/spd_addr.h index c87a5995b8..489fa3330a 100644 --- a/src/mainboard/asus/m4a785-m/spd_addr.h +++ b/src/mainboard/asus/m4a785-m/spd_addr.h @@ -19,7 +19,7 @@ /** * This file defines the SPD addresses for the mainboard. Must be included in - * cache_as_ram_auto.c + * romstage.c */ #define RC00 0 diff --git a/src/mainboard/iei/kino-780am2-fam10/spd_addr.h b/src/mainboard/iei/kino-780am2-fam10/spd_addr.h index c87a5995b8..489fa3330a 100644 --- a/src/mainboard/iei/kino-780am2-fam10/spd_addr.h +++ b/src/mainboard/iei/kino-780am2-fam10/spd_addr.h @@ -19,7 +19,7 @@ /** * This file defines the SPD addresses for the mainboard. Must be included in - * cache_as_ram_auto.c + * romstage.c */ #define RC00 0 diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c index 3695bb4dc4..9324144026 100644 --- a/src/mainboard/intel/xe7501devkit/acpi_tables.c +++ b/src/mainboard/intel/xe7501devkit/acpi_tables.c @@ -55,7 +55,7 @@ unsigned long acpi_fill_madt(unsigned long current) // P64H2#2 Bus A IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start); irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; @@ -63,7 +63,7 @@ unsigned long acpi_fill_madt(unsigned long current) // P64H2#2 Bus B IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start); irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; @@ -72,7 +72,7 @@ unsigned long acpi_fill_madt(unsigned long current) // P64H2#1 Bus A IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start); irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; @@ -80,7 +80,7 @@ unsigned long acpi_fill_madt(unsigned long current) // P64H2#1 Bus B IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start); irq_start += INTEL_IOAPIC_NUM_INTERRUPTS; diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c index 9279b8485d..1a9268061d 100644 --- a/src/mainboard/intel/xe7501devkit/mptable.c +++ b/src/mainboard/intel/xe7501devkit/mptable.c @@ -42,14 +42,14 @@ static void xe7501devkit_register_ioapics(struct mp_config_table *mc) // P64H2#2 Bus A IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base); // P64H2#2 Bus B IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base); @@ -57,14 +57,14 @@ static void xe7501devkit_register_ioapics(struct mp_config_table *mc) // P64H2#1 Bus A IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base); // P64H2#1 Bus B IOAPIC dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0)); if (!dev) - BUG(); // Config.lb error? + BUG(); res = find_resource(dev, PCI_BASE_ADDRESS_0); smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base); } diff --git a/src/mainboard/supermicro/h8dmr_fam10/README b/src/mainboard/supermicro/h8dmr_fam10/README index ce030987ca..040c24498c 100644 --- a/src/mainboard/supermicro/h8dmr_fam10/README +++ b/src/mainboard/supermicro/h8dmr_fam10/README @@ -2,10 +2,6 @@ There are a number of outstanding issues: -* we don't have the mc_patch_01000086.h CPU ucode file yet which is -referenced in a comment in src/mainboard/supermicro/h8dmr_fam10/Options.lb. -AMD has not released it yet. This is not a problem specific to this port. - * I'm seeing toolchain issues. I can't get this tree to compile correctly with gcc 4.3 (32 bit) - there is an optimization issue where certain parts of the CBFS code execute very slowly. With gcc 3.4 (32 bit) that slowness diff --git a/src/mainboard/traverse/geos/romstage.c b/src/mainboard/traverse/geos/romstage.c index d383270285..d5a00a4cbe 100644 --- a/src/mainboard/traverse/geos/romstage.c +++ b/src/mainboard/traverse/geos/romstage.c @@ -78,7 +78,7 @@ void main(unsigned long bist) /* cs5536_disable_internal_uart: disable them for now, set them * up later... */ - /* If debug. real setup done in chipset init via Config.lb. */ + /* If debug. real setup done in chipset init via devicetree.cb. */ cs5536_setup_onchipuart(1); mb_gpio_init(); uart_init(); diff --git a/src/mainboard/via/epia-m700/acpi_tables.c b/src/mainboard/via/epia-m700/acpi_tables.c index 414466f4f6..16c0b46b43 100644 --- a/src/mainboard/via/epia-m700/acpi_tables.c +++ b/src/mainboard/via/epia-m700/acpi_tables.c @@ -42,9 +42,9 @@ extern u32 wake_vec; /* * These four macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "default CONFIG_GENERATE_MP_TABLE = 0" in Options.lb, and also since + * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since * mainboard/via/... have no mptable.c (so that I can not set - * CONFIG_GENERATE_MP_TABLE = 1) as many other mainboards. + * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. * So I have to copy these four to here. acpi_fill_madt() needs this. */ #define MP_IRQ_POLARITY_HIGH 0x1 diff --git a/src/mainboard/via/epia-n/acpi_tables.c b/src/mainboard/via/epia-n/acpi_tables.c index 741784e839..589e14c606 100644 --- a/src/mainboard/via/epia-n/acpi_tables.c +++ b/src/mainboard/via/epia-n/acpi_tables.c @@ -39,10 +39,10 @@ extern const unsigned char AmlCode[]; /* - * These four macros are copied from <arch/smp/mpspec.h>, I have to do this - * since the "default CONFIG_GENERATE_MP_TABLE = 0" in Options.lb, and also since + * These 8 macros are copied from <arch/smp/mpspec.h>, I have to do this + * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since * mainboard/via/... have no mptable.c (so that I can not set - * CONFIG_GENERATE_MP_TABLE = 1) as many other mainboards. + * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards. * So I have to copy these four to here. acpi_fill_madt() needs this. */ #define MP_IRQ_POLARITY_DEFAULT 0x0 diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c index 1f98684c6b..c7bf4919fb 100644 --- a/src/northbridge/amd/amdk8/northbridge.c +++ b/src/northbridge/amd/amdk8/northbridge.c @@ -1,6 +1,6 @@ /* This should be done by Eric 2004.12 yhlu add dual core support - 2005.01 yhlu add support move apic before pci_domain in MB Config.lb + 2005.01 yhlu add support move apic before pci_domain in MB devicetree.cb 2005.02 yhlu add e0 memory hole support 2005.11 yhlu add put sb ht chain on bus 0 */ diff --git a/src/northbridge/amd/lx/grphinit.c b/src/northbridge/amd/lx/grphinit.c index b245eea062..c6ab4df93a 100644 --- a/src/northbridge/amd/lx/grphinit.c +++ b/src/northbridge/amd/lx/grphinit.c @@ -85,7 +85,7 @@ void graphics_init(void) * Controller Priority Select(11) 1, Primary * Display Select(10:8) 0x0, CRT * Graphics Memory Size(7:1) CONFIG_VIDEO_MB >> 1, - * defined in mainboard/../Options.lb + * defined in devicetree.cb * PLL Reference Clock Bypass(0) 0, Default */ diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index e301f8a019..53d0d8c42c 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -570,7 +570,7 @@ static void i945_setup_pci_express_x16(void) /* Setup SLOTCAP */ /* TODO: These values are mainboard dependent and should - * be set from Config.lb or Options.lb. + * be set from devicetree.cb. */ /* NOTE: SLOTCAP becomes RO after the first write! */ reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0xb4); diff --git a/src/southbridge/intel/i82801ax/i82801ax_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_lpc.c index 46878f8dce..c9404ed3c0 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_lpc.c +++ b/src/southbridge/intel/i82801ax/i82801ax_lpc.c @@ -68,7 +68,7 @@ typedef struct southbridge_intel_i82801ax_config config_t; /* * Use 0x0ef8 for a bitmap to cover all these IRQ's. * Use the defined IRQ values above or set mainboard - * specific IRQ values in your mainboards Config.lb. + * specific IRQ values in your devicetree.cb. */ static void i82801ax_enable_apic(struct device *dev) { diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c index c379428c86..0ff44e6054 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_lpc.c +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -70,7 +70,7 @@ typedef struct southbridge_intel_i82801bx_config config_t; /* * Use 0x0ef8 for a bitmap to cover all these IRQ's. * Use the defined IRQ values above or set mainboard - * specific IRQ values in your mainboards Config.lb. + * specific IRQ values in your devicetree.cb. */ static void i82801bx_enable_apic(struct device *dev) { diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c index 84b50d6535..6e05e0d9b5 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_ide.c +++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c @@ -37,7 +37,7 @@ static void ide_init(struct device *dev) printk(BIOS_DEBUG, "i82801gx_ide: initializing... "); if (config == NULL) { - printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n"); + printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in devicetree.cb!\n"); // Trying to set somewhat safe defaults instead of bailing out. enable_primary = enable_secondary = 1; } else { diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c index a5be98735c..c3908489eb 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_sata.c +++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c @@ -36,7 +36,7 @@ static void sata_init(struct device *dev) printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n"); if (config == NULL) { - printk(BIOS_ERR, "i82801gx_sata: error: device not in Config.lb!\n"); + printk(BIOS_ERR, "i82801gx_sata: error: device not in devicetree.cb!\n"); return; } diff --git a/src/southbridge/intel/i82870/p64h2_ioapic.c b/src/southbridge/intel/i82870/p64h2_ioapic.c index 8af57beed7..6a0f0d222f 100644 --- a/src/southbridge/intel/i82870/p64h2_ioapic.c +++ b/src/southbridge/intel/i82870/p64h2_ioapic.c @@ -40,10 +40,10 @@ static void p64h2_ioapic_init(device_t dev) // A note on IOAPIC addresses: // 0 and 1 are used for the local APICs of the dual virtual - // (hyper-threaded) CPUs of physical CPU 0 (mainboard/Config.lb). + // (hyper-threaded) CPUs of physical CPU 0 (devicetree.cb). // 6 and 7 are used for the local APICs of the dual virtual - // (hyper-threaded) CPUs of physical CPU 1 (mainboard/Config.lb). - // 2 is used for the IOAPIC in the 82801 Southbridge (hard-coded in i82801xx_lpc.c) + // (hyper-threaded) CPUs of physical CPU 1 (devicetree.cb). + // 2 is used for the IOAPIC in the 82801 southbridge (hard-coded in i82801xx_lpc.c) // Map APIC index into APIC ID // IDs 3, 4, 5, and 8+ are available (see above note) |