2 files changed, 85 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/bujia/Makefile.mk b/src/mainboard/google/brya/variants/bujia/Makefile.mk
index d38141ca24..bc39984d6c 100644
--- a/src/mainboard/google/brya/variants/bujia/Makefile.mk
+++ b/src/mainboard/google/brya/variants/bujia/Makefile.mk
@@ -4,3 +4,4 @@ bootblock-y += gpio.c
 romstage-y += gpio.c
 
 ramstage-y += gpio.c
+ramstage-y += ramstage.c
diff --git a/src/mainboard/google/brya/variants/bujia/ramstage.c b/src/mainboard/google/brya/variants/bujia/ramstage.c
new file mode 100644
index 0000000000..1aaa54b590
--- /dev/null
+++ b/src/mainboard/google/brya/variants/bujia/ramstage.c
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+#include <chip.h>
+#include <ec/google/chromeec/ec.h>
+#include <ec/google/chromeec/ec_commands.h>
+#include <intelblocks/power_limit.h>
+
+const struct cpu_power_limits limits[] = {
+	/* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */
+	{ PCI_DID_INTEL_ADL_P_ID_10, 15, 15000, 15000,  55000,  55000, 123000 },
+	{ PCI_DID_INTEL_ADL_P_ID_7, 15, 15000, 15000,  55000,  55000, 123000 },
+	{ PCI_DID_INTEL_ADL_P_ID_6, 15, 15000, 15000,  55000,  55000, 123000 },
+	{ PCI_DID_INTEL_ADL_P_ID_5, 28, 28000, 28000,  64000,  64000, 140000 },
+	{ PCI_DID_INTEL_ADL_P_ID_3, 28, 28000, 28000,  64000,  64000, 140000 },
+	{ PCI_DID_INTEL_RPL_P_ID_5, 15, 15000, 15000,  55000,  55000, 100000 },
+	{ PCI_DID_INTEL_RPL_P_ID_4, 15, 15000, 15000,  55000,  55000, 100000 },
+	{ PCI_DID_INTEL_RPL_P_ID_3, 15, 15000, 15000,  55000,  55000, 100000 },
+};
+
+const struct system_power_limits sys_limits[] = {
+	/* SKU_ID, TDP (Watts), psys_pl2 (Watts) */
+	{ PCI_DID_INTEL_ADL_P_ID_10, 15, 90 },
+	{ PCI_DID_INTEL_ADL_P_ID_7, 15, 90 },
+	{ PCI_DID_INTEL_ADL_P_ID_6, 15, 90 },
+	{ PCI_DID_INTEL_ADL_P_ID_5, 28, 90 },
+	{ PCI_DID_INTEL_ADL_P_ID_3, 28, 90 },
+	{ PCI_DID_INTEL_RPL_P_ID_5, 15, 90 },
+	{ PCI_DID_INTEL_RPL_P_ID_4, 15, 90 },
+	{ PCI_DID_INTEL_RPL_P_ID_3, 15, 90 },
+};
+
+/*
+ * Psys_pmax considerations.
+ *
+ * Given the hardware design in bujia, the serial shunt resistor is 0.005ohm.
+ * The full scale of hardware PSYS signal 1.6v maps to system current 8A
+ * instead of real system power. The equation is shown below:
+ * PSYS = 1.6v = (0.005ohm x 8A) x 50 (INA213, gain 50V/V) x R501/(R501 + R510)
+ * R501/(R501 + R510) = 0.8 = 45.3K / (45.3K + 11.5K)
+ *
+ * The Psys_pmax is a SW setting which tells IMVP9.1 the mapping b/w system input
+ * current and the actual system power. Since there is no voltage information
+ * from PSYS, different voltage input would map to different Psys_pmax settings:
+ * For Type-C 15V, the Psys_pmax should be 15v x 8A = 120W
+ * For Type-C 20V, the Psys_pmax should be 20v x 8A = 160W
+ * For a barrel jack, the Psys_pmax should be 20v x 8A = 160W
+ *
+ * Imagine that there is a Type-c 100W (20V/5A) connected to DUT w/ full loading,
+ * and the Psys_pmax setting is 160W. Then IMVP9.1 can calculate the current system
+ * power = 160W * 5A / 8A = 100W, which is the actual system power.
+ */
+struct psys_config psys_config = {
+	.efficiency = 97,
+	.psys_imax_ma = 8000,
+	.bj_volts_mv = 12000
+};
+
+static int32_t get_input_power_voltage(void)
+{
+	struct ec_params_adc_read req = {
+		.adc_channel = 4,
+	};
+	struct ec_response_adc_read info;
+	struct chromeec_command cmd = {
+		.cmd_code     = EC_CMD_ADC_READ,
+		.cmd_size_in  = sizeof(req),
+		.cmd_data_in  = &req,
+		.cmd_size_out = sizeof(info),
+		.cmd_data_out = &info,
+	};
+	if (!google_chromeec_command(&cmd))
+		return psys_config.bj_volts_mv;
+
+	return info.adc_value;
+}
+
+void variant_devtree_update(void)
+{
+	psys_config.bj_volts_mv = get_input_power_voltage();
+	size_t total_entries = ARRAY_SIZE(limits);
+	variant_update_psys_power_limits(limits, sys_limits, total_entries, &psys_config);
+	variant_update_power_limits(limits, total_entries);
+}