diff options
Diffstat (limited to 'src')
-rw-r--r-- | src/northbridge/intel/i440bx/debug.c | 48 | ||||
-rw-r--r-- | src/northbridge/intel/i440bx/raminit.c | 52 |
2 files changed, 26 insertions, 74 deletions
diff --git a/src/northbridge/intel/i440bx/debug.c b/src/northbridge/intel/i440bx/debug.c index 1d8cbf6a57..81b9fd8deb 100644 --- a/src/northbridge/intel/i440bx/debug.c +++ b/src/northbridge/intel/i440bx/debug.c @@ -1,66 +1,34 @@ #include "raminit.h" +#include <spd.h> +#include <console/console.h> void dump_spd_registers(void) { #if CONFIG_DEBUG_RAM_SETUP int i; - print_debug("\n"); + printk(BIOS_DEBUG, "\n"); for(i = 0; i < DIMM_SOCKETS; i++) { unsigned device; device = DIMM0 + i; if (device) { int j; - print_debug("dimm: "); - print_debug_hex8(i); - print_debug(".0: "); - print_debug_hex8(device); + printk(BIOS_DEBUG, "DIMM %d: %02x", i, device); for(j = 0; j < 256; j++) { int status; unsigned char byte; if ((j & 0xf) == 0) { - print_debug("\n"); - print_debug_hex8(j); - print_debug(": "); + printk(BIOS_DEBUG, "\n%02x: ", j); } status = spd_read_byte(device, j); if (status < 0) { - print_debug("bad device\n"); + printk(BIOS_DEBUG, "bad device\n"); break; } byte = status & 0xff; - print_debug_hex8(byte); - print_debug_char(' '); + printk(BIOS_DEBUG, "%02x ", byte); } - print_debug("\n"); + printk(BIOS_DEBUG, "\n"); } } #endif } - -#if 0 -void dump_spd_registers(void) -{ - unsigned device; - device = SMBUS_MEM_DEVICE_START; - printk(BIOS_DEBUG, "\n"); - while(device <= SMBUS_MEM_DEVICE_END) { - int status = 0; - int i; - printk(BIOS_DEBUG, "dimm %02x", device); - for(i = 0; (i < 256) && (status == 0); i++) { - unsigned char byte; - if ((i % 20) == 0) { - printk(BIOS_DEBUG, "\n%3d: ", i); - } - status = smbus_read_byte(device, i, &byte); - if (status != 0) { - printk(BIOS_DEBUG, "bad device\n"); - continue; - } - printk(BIOS_DEBUG, "%02x ", byte); - } - device += SMBUS_MEM_DEVICE_INC; - printk(BIOS_DEBUG, "\n"); - } -} -#endif diff --git a/src/northbridge/intel/i440bx/raminit.c b/src/northbridge/intel/i440bx/raminit.c index 205d40f4d1..b7d5b29ed8 100644 --- a/src/northbridge/intel/i440bx/raminit.c +++ b/src/northbridge/intel/i440bx/raminit.c @@ -38,13 +38,14 @@ Macros and definitions. /* Debugging macros. */ #if CONFIG_DEBUG_RAM_SETUP -#define PRINT_DEBUG(x) print_debug(x) -#define PRINT_DEBUG_HEX8(x) print_debug_hex8(x) -#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x) -#define PRINT_DEBUG_HEX32(x) print_debug_hex32(x) +#include "lib/debug.c" +#define PRINT_DEBUG(x...) printk(BIOS_DEBUG, x) +#define PRINT_DEBUG_HEX8(x) PRINT_DEBUG("%02x", x) +#define PRINT_DEBUG_HEX16(x) PRINT_DEBUG("%04x", x) +#define PRINT_DEBUG_HEX32(x) PRINT_DEBUG("%08x", x) #define DUMPNORTH() dump_pci_device(NB) #else -#define PRINT_DEBUG(x) +#define PRINT_DEBUG(x...) #define PRINT_DEBUG_HEX8(x) #define PRINT_DEBUG_HEX16(x) #define PRINT_DEBUG_HEX32(x) @@ -621,11 +622,7 @@ static void spd_enable_refresh(void) continue; reg = (reg & 0xf8) | refresh_rate_map[(value & 0x7f)]; - PRINT_DEBUG(" Enabling refresh (DRAMC = 0x"); - PRINT_DEBUG_HEX8(reg); - PRINT_DEBUG(") for DIMM "); - PRINT_DEBUG_HEX8(i); - PRINT_DEBUG("\n"); + PRINT_DEBUG(" Enabling refresh (DRAMC = 0x%02x) for DIMM %02x\n", reg, i); } pci_write_config8(NB, DRAMC, reg); @@ -662,8 +659,8 @@ void sdram_set_registers(void) } struct dimm_size { - unsigned long side1; - unsigned long side2; + u32 side1; + u32 side2; }; static struct dimm_size spd_get_dimm_size(unsigned int device) @@ -718,15 +715,13 @@ static struct dimm_size spd_get_dimm_size(unsigned int device) * modules by setting them to a supported size. */ if(sz.side1 > 128) { - PRINT_DEBUG("Side1 was 0x"); - PRINT_DEBUG_HEX16(sz.side1); - PRINT_DEBUG(" but only 128MB will be used.\n"); + PRINT_DEBUG("Side1 was %dMB but only 128MB will be used.\n", + sz.side1); sz.side1 = 128; if(sz.side2 > 128) { - PRINT_DEBUG("Side2 was 0x"); - PRINT_DEBUG_HEX16(sz.side2); - PRINT_DEBUG(" but only 128MB will be used.\n"); + PRINT_DEBUG("Side2 was %dMB but only 128MB will be used.\n", + sz.side2); sz.side2 = 128; } } @@ -759,15 +754,12 @@ static void set_dram_row_attributes(void) if (value == SPD_MEMORY_TYPE_EDO || value == SPD_MEMORY_TYPE_SDRAM) { - PRINT_DEBUG("Found "); if (value == SPD_MEMORY_TYPE_EDO) { edosd |= 0x02; } else if (value == SPD_MEMORY_TYPE_SDRAM) { edosd |= 0x04; } - PRINT_DEBUG("DIMM in slot "); - PRINT_DEBUG_HEX8(i); - PRINT_DEBUG("\n"); + PRINT_DEBUG("Found DIMM in slot %d\n", i); if (edosd == 0x06) { print_err("Mixing EDO/SDRAM unsupported!\n"); @@ -925,21 +917,15 @@ static void set_dram_row_attributes(void) /* Set paging policy register. */ pci_write_config8(NB, PGPOL + 1, bpr); - PRINT_DEBUG("PGPOL[BPR] has been set to 0x"); - PRINT_DEBUG_HEX8(bpr); - PRINT_DEBUG("\n"); + PRINT_DEBUG("PGPOL[BPR] has been set to 0x%02x\n", bpr); /* Set DRAM row page size register. */ pci_write_config16(NB, RPS, rps); - PRINT_DEBUG("RPS has been set to 0x"); - PRINT_DEBUG_HEX16(rps); - PRINT_DEBUG("\n"); + PRINT_DEBUG("RPS has been set to 0x%04x\n", rps); /* ### ECC */ pci_write_config8(NB, NBXCFG + 3, nbxecc); - PRINT_DEBUG("NBXECC[31:24] has been set to 0x"); - PRINT_DEBUG_HEX8(nbxecc); - PRINT_DEBUG("\n"); + PRINT_DEBUG("NBXECC[31:24] has been set to 0x%02x\n", nbxecc); /* Set DRAMC[4:3] to proper memory type (EDO/SDRAM). * TODO: Registered SDRAM support. @@ -956,9 +942,7 @@ static void set_dram_row_attributes(void) value = pci_read_config8(NB, DRAMC) & 0xe7; value |= edosd; pci_write_config8(NB, DRAMC, value); - PRINT_DEBUG("DRAMC has been set to 0x"); - PRINT_DEBUG_HEX8(value); - PRINT_DEBUG("\n"); + PRINT_DEBUG("DRAMC has been set to 0x%02x\n", value); } void sdram_set_spd_registers(void) |