summaryrefslogtreecommitdiff
path: root/src/vendorcode/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/vendorcode/intel')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h8
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h2996
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h3553
3 files changed, 6532 insertions, 25 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h
index decbb99aa6..1ef1e76b0f 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -37,11 +37,11 @@ are permitted provided that the following conditions are met:
#pragma pack(1)
-#define FSPT_UPD_SIGNATURE 0x545F4450554C4349 /* 'ICLUPD_T' */
+#define FSPT_UPD_SIGNATURE 0x545F4450554C4349 /* 'ICLUPD_T' */
-#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4349 /* 'ICLUPD_M' */
+#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4349 /* 'ICLUPD_M' */
-#define FSPS_UPD_SIGNATURE 0x535F4450554C4349 /* 'ICLUPD_S' */
+#define FSPS_UPD_SIGNATURE 0x535F4450554C4349 /* 'ICLUPD_S' */
#pragma pack()
diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h
index cbe2d3c61b..e42727bbfc 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspmUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -40,15 +40,2989 @@ are permitted provided that the following conditions are met:
#include <MemInfoHob.h>
+///
+/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
+///
+typedef struct {
+ UINT8 Revision; ///< Chipset Init Info Revision
+ UINT8 Rsvd[3]; ///< Reserved
+ UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
+ UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
+} CHIPSET_INIT_INFO;
+
+
/** Fsp M Configuration
**/
typedef struct {
-} FSP_M_CONFIG;
-/** Fsp M Test Configuration
+/** Offset 0x0040 - Memory SPD Pointer Channel 0 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
**/
-typedef struct {
-} FSP_M_TEST_CONFIG;
+ UINT32 MemorySpdPtr00;
+
+/** Offset 0x0044 - Memory SPD Pointer Channel 0 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr01;
+
+/** Offset 0x0048 - Memory SPD Pointer Channel 1 Dimm 0
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr10;
+
+/** Offset 0x004C - Memory SPD Pointer Channel 1 Dimm 1
+ Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00
+**/
+ UINT32 MemorySpdPtr11;
+
+/** Offset 0x0050 - Spd Address Tabl
+ Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used
+ if SPD Address is 00
+**/
+ UINT8 SpdAddressTable[4];
+
+/** Offset 0x0054 - SPD Data Length
+ Length of SPD Data
+ 0x100:256 Bytes, 0x200:512 Bytes
+**/
+ UINT16 MemorySpdDataLen;
+
+/** Offset 0x0056 - Dq Byte Map CH0
+ Dq byte mapping between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqByteMapCh0[12];
+
+/** Offset 0x0062 - Dq Byte Map CH1
+ Dq byte mapping between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqByteMapCh1[12];
+
+/** Offset 0x006E - Dqs Map CPU to DRAM CH 0
+ Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh0[8];
+
+/** Offset 0x0076 - Dqs Map CPU to DRAM CH 1
+ Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent
+**/
+ UINT8 DqsMapCpu2DramCh1[8];
+
+/** Offset 0x007E - RcompResister settings
+ Indicates RcompReister settings: Board-dependent
+**/
+ UINT16 RcompResistor[3];
+
+/** Offset 0x0084 - RcompTarget settings
+ RcompTarget settings: board-dependent
+**/
+ UINT16 RcompTarget[5];
+
+/** Offset 0x008E
+**/
+ UINT8 UnusedUpdSpace0[2];
+
+/** Offset 0x0090 - Platform Reserved Memory Size
+ The minimum platform memory size required to pass control into DXE
+**/
+ UINT64 PlatformMemorySize;
+
+/** Offset 0x0098 - PcdSerialDebugLevel
+ Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 PcdSerialDebugLevel;
+
+/** Offset 0x0099 - Ask MRC to clear memory content
+ Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
+ $EN_DIS
+**/
+ UINT8 CleanMemory;
+
+/** Offset 0x009A - Smram Mask
+ The SMM Regions AB-SEG and/or H-SEG reserved
+ 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
+**/
+ UINT8 SmramMask;
+
+/** Offset 0x009B - Dqs Pins Interleaved Setting
+ Indicates DqPinsInterleaved setting: board-dependent
+ $EN_DIS
+**/
+ UINT8 DqPinsInterleaved;
+
+/** Offset 0x009C - SA GV
+ System Agent dynamic frequency support and when enabled memory will be training
+ at three different frequencies.
+ 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled
+**/
+ UINT8 SaGv;
+
+/** Offset 0x009D
+**/
+ UINT8 UnusedUpdSpace1;
+
+/** Offset 0x009E - DDR Frequency Limit
+ Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
+ 2133, 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 DdrFreqLimit;
+
+/** Offset 0x00A0 - Channel A DIMM Control
+ Channel A DIMM Control Support - Enable or Disable Dimms on Channel A.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel0;
+
+/** Offset 0x00A1 - Channel B DIMM Control
+ Channel B DIMM Control Support - Enable or Disable Dimms on Channel B.
+ 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs
+**/
+ UINT8 DisableDimmChannel1;
+
+/** Offset 0x00A2 - MRC Safe Config
+ Enables/Disable MRC Safe Config
+ $EN_DIS
+**/
+ UINT8 MrcSafeConfig;
+
+/** Offset 0x00A3 - LPDDR4 Write DQ/DQS Retraining
+ Enables/Disable LPDDR4 Write DQ/DQS Retraining
+ $EN_DIS
+**/
+ UINT8 Lp4DqsOscEn;
+
+/** Offset 0x00A4 - Training Trace
+ This option enables the trained state tracing feature in MRC. This feature will
+ print out the key training parameters state across major training steps.
+ $EN_DIS
+**/
+ UINT8 TrainTrace;
+
+/** Offset 0x00A5 - Rank Margin Tool per Task
+ This option enables the user to execute Rank Margin Tool per major training step
+ in the MRC.
+ $EN_DIS
+**/
+ UINT8 RmtPerTask;
+
+/** Offset 0x00A6 - LowSupplyEnData
+ Enable: Enable Low Supply for LPDDR4 Data, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnData;
+
+/** Offset 0x00A7 - LowSupplyEnCcc
+ Enable: Enable Low Supply for LPDDR4 Clock/Command/Control, Disable(Default)
+ $EN_DIS
+**/
+ UINT8 LowSupplyEnCcc;
+
+/** Offset 0x00A8 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
+**/
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x00A9
+**/
+ UINT8 UnusedUpdSpace2;
+
+/** Offset 0x00AA - Low Frequency
+ SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 FreqSaGvLow;
+
+/** Offset 0x00AC - Mid Frequency
+ SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133,
+ 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 FreqSaGvMid;
+
+/** Offset 0x00AE - DDR Speed Control
+ DDR Frequency and Gear control for all SAGV points.
+ 0:Auto, 1:Manual
+**/
+ UINT8 DdrSpeedControl;
+
+/** Offset 0x00AF - SA GV Low Gear
+ Gear Selection for SAGV Low point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvLowGear2;
+
+/** Offset 0x00B0 - SA GV Mid Gear
+ Gear Selection for SAGV Mid point
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvMidGear2;
+
+/** Offset 0x00B1 - SA GV High Gear
+ Gear Selection for SAGV High point, or when SAGV is disabled
+ 0:Gear1, 1:Gear2
+**/
+ UINT8 SaGvHighGear2;
+
+/** Offset 0x00B2 - Scrambler Support
+ This option enables data scrambling in memory.
+ $EN_DIS
+**/
+ UINT8 ScramblerSupport;
+
+/** Offset 0x00B3 - Safe Mode Support
+ This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 SafeMode;
+
+/** Offset 0x00B4 - Ddr4OneDpc
+ DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
+ or on both (default)
+ 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
+**/
+ UINT8 Ddr4OneDpc;
+
+/** Offset 0x00B5 - Probeless Trace
+ Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
+ This also requires IED to be enabled.
+ $EN_DIS
+**/
+ UINT8 ProbelessTrace;
+
+/** Offset 0x00B6 - VREF_CA
+ CA Vref routing: board-dependent
+ 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B,
+ 2:VREF_CA to CH_A and VREF_DQ_B to CH_B
+**/
+ UINT8 CaVrefConfig;
+
+/** Offset 0x00B7 - SPD Profile Selected
+ Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP
+ Profile 1, 3=XMP Profile 2
+ 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2
+**/
+ UINT8 SpdProfileSelected;
+
+/** Offset 0x00B8 - Memory Voltage
+ Memory Voltage Override (Vddq). Default = no override
+ 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
+ Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts
+**/
+ UINT16 VddVoltage;
+
+/** Offset 0x00BA - Memory Reference Clock
+ 100MHz, 133MHz.
+ 0:133MHz, 1:100MHz
+**/
+ UINT8 RefClk;
+
+/** Offset 0x00BB - Memory Ratio
+ Automatic or the frequency will equal ratio times reference clock. Set to Auto to
+ recalculate memory timings listed below.
+ 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
+**/
+ UINT8 Ratio;
+
+/** Offset 0x00BC - tCL
+ CAS Latency, 0: AUTO, max: 31
+**/
+ UINT8 tCL;
+
+/** Offset 0x00BD - tCWL
+ Min CAS Write Latency Delay Time, 0: AUTO, max: 34
+**/
+ UINT8 tCWL;
+
+/** Offset 0x00BE - tFAW
+ Min Four Activate Window Delay Time, 0: AUTO, max: 63
+**/
+ UINT16 tFAW;
+
+/** Offset 0x00C0 - tRAS
+ RAS Active Time, 0: AUTO, max: 64
+**/
+ UINT16 tRAS;
+
+/** Offset 0x00C2 - tRCD/tRP
+ RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63
+**/
+ UINT8 tRCDtRP;
+
+/** Offset 0x00C3
+**/
+ UINT8 UnusedUpdSpace3;
+
+/** Offset 0x00C4 - tREFI
+ Refresh Interval, 0: AUTO, max: 65535
+**/
+ UINT16 tREFI;
+
+/** Offset 0x00C6 - tRFC
+ Min Refresh Recovery Delay Time, 0: AUTO, max: 1023
+**/
+ UINT16 tRFC;
+
+/** Offset 0x00C8 - tRRD
+ Min Row Active to Row Active Delay Time, 0: AUTO, max: 15
+**/
+ UINT8 tRRD;
+
+/** Offset 0x00C9 - tRTP
+ Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
+ values: 5, 6, 7, 8, 9, 10, 12
+**/
+ UINT8 tRTP;
+
+/** Offset 0x00CA - tWR
+ Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
+ 20, 24, 30, 34, 40
+ 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
+ 34:34, 40:40
+**/
+ UINT8 tWR;
+
+/** Offset 0x00CB - tWTR
+ Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28
+**/
+ UINT8 tWTR;
+
+/** Offset 0x00CC - NMode
+ System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
+**/
+ UINT8 NModeSupport;
+
+/** Offset 0x00CD - DllBwEn[0]
+ DllBwEn[0], for 1067 (0..7)
+**/
+ UINT8 DllBwEn0;
+
+/** Offset 0x00CE - DllBwEn[1]
+ DllBwEn[1], for 1333 (0..7)
+**/
+ UINT8 DllBwEn1;
+
+/** Offset 0x00CF - DllBwEn[2]
+ DllBwEn[2], for 1600 (0..7)
+**/
+ UINT8 DllBwEn2;
+
+/** Offset 0x00D0 - DllBwEn[3]
+ DllBwEn[3], for 1867 and up (0..7)
+**/
+ UINT8 DllBwEn3;
+
+/** Offset 0x00D1 - ISVT IO Port Address
+ ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default
+**/
+ UINT8 IsvtIoPort;
+
+/** Offset 0x00D2 - HobBufferSize
+ Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
+ total HOB size).
+ 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
+**/
+ UINT8 HobBufferSize;
+
+/** Offset 0x00D3 - Early Command Training
+ Enables/Disable Early Command Training
+ $EN_DIS
+**/
+ UINT8 ECT;
+
+/** Offset 0x00D4 - SenseAmp Offset Training
+ Enables/Disable SenseAmp Offset Training
+ $EN_DIS
+**/
+ UINT8 SOT;
+
+/** Offset 0x00D5 - Early ReadMPR Timing Centering 2D
+ Enables/Disable Early ReadMPR Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDMPRTC2D;
+
+/** Offset 0x00D6 - Read MPR Training
+ Enables/Disable Read MPR Training
+ $EN_DIS
+**/
+ UINT8 RDMPRT;
+
+/** Offset 0x00D7 - Receive Enable Training
+ Enables/Disable Receive Enable Training
+ $EN_DIS
+**/
+ UINT8 RCVET;
+
+/** Offset 0x00D8 - Jedec Write Leveling
+ Enables/Disable Jedec Write Leveling
+ $EN_DIS
+**/
+ UINT8 JWRL;
+
+/** Offset 0x00D9 - Early Write Time Centering 2D
+ Enables/Disable Early Write Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 EWRTC2D;
+
+/** Offset 0x00DA - Early Read Time Centering 2D
+ Enables/Disable Early Read Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDTC2D;
+
+/** Offset 0x00DB - Write Timing Centering 1D
+ Enables/Disable Write Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRTC1D;
+
+/** Offset 0x00DC - Write Voltage Centering 1D
+ Enables/Disable Write Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRVC1D;
+
+/** Offset 0x00DD - Read Timing Centering 1D
+ Enables/Disable Read Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDTC1D;
+
+/** Offset 0x00DE - Dimm ODT Training
+ Enables/Disable Dimm ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTT;
+
+/** Offset 0x00DF - DIMM RON Training
+ Enables/Disable DIMM RON Training
+ $EN_DIS
+**/
+ UINT8 DIMMRONT;
+
+/** Offset 0x00E0 - Write Slew Rate Training
+ Enables/Disable Write Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 WRSRT;
+
+/** Offset 0x00E1 - Read ODT Training
+ Enables/Disable Read ODT Training
+ $EN_DIS
+**/
+ UINT8 RDODTT;
+
+/** Offset 0x00E2 - Read Equalization Training
+ Enables/Disable Read Equalization Training
+ $EN_DIS
+**/
+ UINT8 RDEQT;
+
+/** Offset 0x00E3 - Read Amplifier Training
+ Enables/Disable Read Amplifier Training
+ $EN_DIS
+**/
+ UINT8 RDAPT;
+
+/** Offset 0x00E4 - Write Timing Centering 2D
+ Enables/Disable Write Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRTC2D;
+
+/** Offset 0x00E5 - Read Timing Centering 2D
+ Enables/Disable Read Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDTC2D;
+
+/** Offset 0x00E6 - Write Voltage Centering 2D
+ Enables/Disable Write Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRVC2D;
+
+/** Offset 0x00E7 - Read Voltage Centering 2D
+ Enables/Disable Read Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDVC2D;
+
+/** Offset 0x00E8 - Command Voltage Centering
+ Enables/Disable Command Voltage Centering
+ $EN_DIS
+**/
+ UINT8 CMDVC;
+
+/** Offset 0x00E9 - Late Command Training
+ Enables/Disable Late Command Training
+ $EN_DIS
+**/
+ UINT8 LCT;
+
+/** Offset 0x00EA - Round Trip Latency Training
+ Enables/Disable Round Trip Latency Training
+ $EN_DIS
+**/
+ UINT8 RTL;
+
+/** Offset 0x00EB - Turn Around Timing Training
+ Enables/Disable Turn Around Timing Training
+ $EN_DIS
+**/
+ UINT8 TAT;
+
+/** Offset 0x00EC - Receive Enable Centering 1D
+ Enables/Disable Receive Enable Centering 1D
+ $EN_DIS
+**/
+ UINT8 RCVENC1D;
+
+/** Offset 0x00ED - Rank Margin Tool
+ Enable/disable Rank Margin Tool.
+ $EN_DIS
+**/
+ UINT8 RMT;
+
+/** Offset 0x00EE - Margin Limit Check
+ Margin Limit Check. Choose level of margin check
+ 0:Disable, 1:L1, 2:L2, 3:Both
+**/
+ UINT8 MarginLimitCheck;
+
+/** Offset 0x00EF
+**/
+ UINT8 UnusedUpdSpace4;
+
+/** Offset 0x00F0 - Margin Limit L2
+ % of L1 check for margin limit check
+**/
+ UINT16 MarginLimitL2;
+
+/** Offset 0x00F2 - Memory Test
+ Enables/Disable Memory Test
+ $EN_DIS
+**/
+ UINT8 MEMTST;
+
+/** Offset 0x00F3 - DIMM SPD Alias Test
+ Enables/Disable DIMM SPD Alias Test
+ $EN_DIS
+**/
+ UINT8 ALIASCHK;
+
+/** Offset 0x00F4 - Retrain Margin Check
+ Enables/Disable Retrain Margin Check
+ $EN_DIS
+**/
+ UINT8 RMC;
+
+/** Offset 0x00F5 - Write Drive Strength Up/Dn independently
+ Enables/Disable Write Drive Strength Up/Dn independently
+ $EN_DIS
+**/
+ UINT8 WRDSUDT;
+
+/** Offset 0x00F6 - Command Slew Rate Training
+ Enables/Disable Command Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 CMDSR;
+
+/** Offset 0x00F7 - Command Drive Strength and Equalization 2D
+ Enables/Disable Command Drive Strength and Equalization 2D
+ $EN_DIS
+**/
+ UINT8 CMDDSEQ;
+
+/** Offset 0x00F8 - Command Normalization
+ Enables/Disable Command Normalization
+ $EN_DIS
+**/
+ UINT8 CMDNORM;
+
+/** Offset 0x00F9 - Early DQ Write Drive Strength and Equalization Training
+ Enables/Disable Early DQ Write Drive Strength and Equalization Training
+ $EN_DIS
+**/
+ UINT8 EWRDSEQ;
+
+/** Offset 0x00FA - Read Voltage Centering
+ Enables/Disable Read Voltage Centering
+ $EN_DIS
+**/
+ UINT8 RDVC1D;
+
+/** Offset 0x00FB - Write TCO Comp Training
+ Enables/Disable Write TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCO;
+
+/** Offset 0x00FC - Clock TCO Comp Training
+ Enables/Disable Clock TCO Comp Training
+ $EN_DIS
+**/
+ UINT8 CLKTCO;
+
+/** Offset 0x00FD - Dimm ODT CA Training
+ Enables/Disable Dimm ODT CA Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTCA;
+
+/** Offset 0x00FE - Write TCO Dqs Training
+ Enables/Disable Write TCO Dqs Training
+ $EN_DIS
+**/
+ UINT8 TXTCODQS;
+
+/** Offset 0x00FF - Duty Cycle Correction
+ Enables/Disable Duty Cycle Correction
+ $EN_DIS
+**/
+ UINT8 DCC;
+
+/** Offset 0x0100 - DQ DFE Training
+ Enable/Disable DQ DFE Training
+ $EN_DIS
+**/
+ UINT8 DQDFE;
+
+/** Offset 0x0101 - Sense Amplifier Correction Training
+ Enable/Disable Sense Amplifier Correction Training
+ $EN_DIS
+**/
+ UINT8 SOTC;
+
+/** Offset 0x0102 - ECC Support
+ Enables/Disable ECC Support
+ $EN_DIS
+**/
+ UINT8 EccSupport;
+
+/** Offset 0x0103 - Memory Remap
+ Enables/Disable Memory Remap
+ $EN_DIS
+**/
+ UINT8 RemapEnable;
+
+/** Offset 0x0104 - MRC Time Measure
+ Enable/Disable MRC Time Measure
+ $EN_DIS
+**/
+ UINT8 MrcTimeMeasure;
+
+/** Offset 0x0105 - MRC Fast Boot
+ Enable/Disable MRC Fast flow
+ $EN_DIS
+**/
+ UINT8 MrcFastBoot;
+
+/** Offset 0x0106 - MRC Force Training on Warm
+ Enables/Disable the MRC training on warm boot
+ $EN_DIS
+**/
+ UINT8 MrcTrainOnWarm;
+
+/** Offset 0x0107 - Rank Interleave support
+ Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
+ the same time.
+ $EN_DIS
+**/
+ UINT8 RankInterleave;
+
+/** Offset 0x0108 - Enhanced Interleave support
+ Enables/Disable Enhanced Interleave support
+ $EN_DIS
+**/
+ UINT8 EnhancedInterleave;
+
+/** Offset 0x0109 - Memory Trace
+ Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of
+ equal size. This option may change TOLUD and REMAP values as needed.
+ $EN_DIS
+**/
+ UINT8 MemoryTrace;
+
+/** Offset 0x010A - Ch Hash Support
+ Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
+ $EN_DIS
+**/
+ UINT8 ChHashEnable;
+
+/** Offset 0x010B - Extern Therm Status
+ Enables/Disable Extern Therm Status
+ $EN_DIS
+**/
+ UINT8 EnableExtts;
+
+/** Offset 0x010C - Closed Loop Therm Manage
+ Enables/Disable Closed Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableCltm;
+
+/** Offset 0x010D - Open Loop Therm Manage
+ Enables/Disable Open Loop Therm Manage
+ $EN_DIS
+**/
+ UINT8 EnableOltm;
+
+/** Offset 0x010E - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter
+ $EN_DIS
+**/
+ UINT8 EnablePwrDn;
+
+/** Offset 0x010F - DDR PowerDown and idle counter - LPDDR
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDnLpddr;
+
+/** Offset 0x0110 - Use user provided power weights, scale factor, and channel power floor values
+ Enables/Disable Use user provided power weights, scale factor, and channel power
+ floor values
+ $EN_DIS
+**/
+ UINT8 UserPowerWeightsEn;
+
+/** Offset 0x0111 - RAPL PL Lock
+ Enables/Disable RAPL PL Lock
+ $EN_DIS
+**/
+ UINT8 RaplLim2Lock;
+
+/** Offset 0x0112 - RAPL PL 2 enable
+ Enables/Disable RAPL PL 2 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim2Ena;
+
+/** Offset 0x0113 - RAPL PL 1 enable
+ Enables/Disable RAPL PL 1 enable
+ $EN_DIS
+**/
+ UINT8 RaplLim1Ena;
+
+/** Offset 0x0114 - SelfRefresh Enable
+ Enables/Disable SelfRefresh Enable
+ $EN_DIS
+**/
+ UINT8 SrefCfgEna;
+
+/** Offset 0x0115 - Throttler CKEMin Defeature - LPDDR
+ Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeatLpddr;
+
+/** Offset 0x0116 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeat;
+
+/** Offset 0x0117 - Enable RH Prevention
+ Enables/Disable RH Prevention
+ $EN_DIS
+**/
+ UINT8 RhPrevention;
+
+/** Offset 0x0118 - Exit On Failure (MRC)
+ Enables/Disable Exit On Failure (MRC)
+ $EN_DIS
+**/
+ UINT8 ExitOnFailure;
+
+/** Offset 0x0119 - LPDDR Thermal Sensor
+ Enables/Disable LPDDR Thermal Sensor
+ $EN_DIS
+**/
+ UINT8 DdrThermalSensor;
+
+/** Offset 0x011A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedClock;
+
+/** Offset 0x011B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedZq;
+
+/** Offset 0x011C - Base reference clock value
+ Base reference clock value, in Hertz(Default is 125Hz)
+ 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
+**/
+ UINT32 BClkFrequency;
+
+/** Offset 0x0120 - Ch Hash Interleaved Bit
+ Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
+ the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
+ 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
+**/
+ UINT8 ChHashInterleaveBit;
+
+/** Offset 0x0121
+**/
+ UINT8 UnusedUpdSpace5;
+
+/** Offset 0x0122 - Ch Hash Mask
+ Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
+ BITS [19:6] Default is 0x30CC
+**/
+ UINT16 ChHashMask;
+
+/** Offset 0x0124 - Extended Bank Hashing
+ Eanble/Disable ExtendedBankHashing
+ $EN_DIS
+**/
+ UINT8 ExtendedBankHashing;
+
+/** Offset 0x0125 - Energy Scale Factor
+ Energy Scale Factor, Default is 4
+**/
+ UINT8 EnergyScaleFact;
+
+/** Offset 0x0126 - EPG DIMM Idd3N
+ Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
+ a per DIMM basis. Default is 26
+**/
+ UINT16 Idd3n;
+
+/** Offset 0x0128 - EPG DIMM Idd3P
+ Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
+ on a per DIMM basis. Default is 11
+**/
+ UINT16 Idd3p;
+
+/** Offset 0x012A - RH Activation Probability
+ RH Activation Probability, Probability value is 1/2^(inputvalue)
+**/
+ UINT8 RhActProbability;
+
+/** Offset 0x012B - RAPL PL 2 WindowX
+ Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindX;
+
+/** Offset 0x012C - RAPL PL 2 WindowY
+ Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim2WindY;
+
+/** Offset 0x012D - RAPL PL 1 WindowX
+ Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindX;
+
+/** Offset 0x012E - RAPL PL 1 WindowY
+ Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+**/
+ UINT8 RaplLim1WindY;
+
+/** Offset 0x012F
+**/
+ UINT8 UnusedUpdSpace6;
+
+/** Offset 0x0130 - RAPL PL 2 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+**/
+ UINT16 RaplLim2Pwr;
+
+/** Offset 0x0132 - RAPL PL 1 Power
+ range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+**/
+ UINT16 RaplLim1Pwr;
+
+/** Offset 0x0134 - Warm Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm0;
+
+/** Offset 0x0135 - Warm Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh0Dimm1;
+
+/** Offset 0x0136 - Warm Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm0;
+
+/** Offset 0x0137 - Warm Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 WarmThresholdCh1Dimm1;
+
+/** Offset 0x0138 - Hot Threshold Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm0;
+
+/** Offset 0x0139 - Hot Threshold Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh0Dimm1;
+
+/** Offset 0x013A - Hot Threshold Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm0;
+
+/** Offset 0x013B - Hot Threshold Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+**/
+ UINT8 HotThresholdCh1Dimm1;
+
+/** Offset 0x013C - Warm Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm0;
+
+/** Offset 0x013D - Warm Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh0Dimm1;
+
+/** Offset 0x013E - Warm Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm0;
+
+/** Offset 0x013F - Warm Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 WarmBudgetCh1Dimm1;
+
+/** Offset 0x0140 - Hot Budget Ch0 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh0Dimm0;
+
+/** Offset 0x0141 - Hot Budget Ch0 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh0Dimm1;
+
+/** Offset 0x0142 - Hot Budget Ch1 Dimm0
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm0;
+
+/** Offset 0x0143 - Hot Budget Ch1 Dimm1
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM
+**/
+ UINT8 HotBudgetCh1Dimm1;
+
+/** Offset 0x0144 - Idle Energy Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm0;
+
+/** Offset 0x0145 - Idle Energy Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh0Dimm1;
+
+/** Offset 0x0146 - Idle Energy Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm0;
+
+/** Offset 0x0147 - Idle Energy Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyCh1Dimm1;
+
+/** Offset 0x0148 - PowerDown Energy Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh0Dimm0;
+
+/** Offset 0x0149 - PowerDown Energy Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh0Dimm1;
+
+/** Offset 0x014A - PowerDown Energy Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh1Dimm0;
+
+/** Offset 0x014B - PowerDown Energy Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def)
+**/
+ UINT8 PdEnergyCh1Dimm1;
+
+/** Offset 0x014C - Activate Energy Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm0;
+
+/** Offset 0x014D - Activate Energy Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh0Dimm1;
+
+/** Offset 0x014E - Activate Energy Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm0;
+
+/** Offset 0x014F - Activate Energy Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyCh1Dimm1;
+
+/** Offset 0x0150 - Read Energy Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm0;
+
+/** Offset 0x0151 - Read Energy Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh0Dimm1;
+
+/** Offset 0x0152 - Read Energy Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm0;
+
+/** Offset 0x0153 - Read Energy Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyCh1Dimm1;
+
+/** Offset 0x0154 - Write Energy Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm0;
+
+/** Offset 0x0155 - Write Energy Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh0Dimm1;
+
+/** Offset 0x0156 - Write Energy Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm0;
+
+/** Offset 0x0157 - Write Energy Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyCh1Dimm1;
+
+/** Offset 0x0158 - Throttler CKEMin Timer
+ Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
+ Dfault is 0x30
+**/
+ UINT8 ThrtCkeMinTmr;
+
+/** Offset 0x0159 - Cke Rank Mapping
+ Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies
+ which rank CKE[i] goes to.
+**/
+ UINT8 CkeRankMapping;
+
+/** Offset 0x015A - Rapl Power Floor Ch0
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh0;
+
+/** Offset 0x015B - Rapl Power Floor Ch1
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh1;
+
+/** Offset 0x015C - Command Rate Support
+ CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
+ 0:Disable, 1:1 CMD, 2:2 CMDS, 3:3 CMDS, 4:4 CMDS, 5:5 CMDS, 6:6 CMDS, 7:7 CMDS
+**/
+ UINT8 EnCmdRate;
+
+/** Offset 0x015D - REFRESH_2X_MODE
+ 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
+ 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
+**/
+ UINT8 Refresh2X;
+
+/** Offset 0x015E - Energy Performance Gain
+ Enable/disable(default) Energy Performance Gain.
+ $EN_DIS
+**/
+ UINT8 EpgEnable;
+
+/** Offset 0x015F - Row Hammer Solution
+ Type of method used to prevent Row Hammer. Default is Hardware RHP
+ 0:Hardware RHP, 1:2x Refresh
+**/
+ UINT8 RhSolution;
+
+/** Offset 0x0160 - User Manual Threshold
+ Disabled: Predefined threshold will be used.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserThresholdEnable;
+
+/** Offset 0x0161 - User Manual Budget
+ Disabled: Configuration of memories will defined the Budget value.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserBudgetEnable;
+
+/** Offset 0x0162 - TcritMax
+ Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax
+ has to be greater than THIGHMax .\n
+ Critical temperature will be TcritMax
+**/
+ UINT8 TsodTcritMax;
+
+/** Offset 0x0163 - Event mode
+ Disable:Comparator mode.\n
+ Enable:Interrupt mode
+ $EN_DIS
+**/
+ UINT8 TsodEventMode;
+
+/** Offset 0x0164 - EVENT polarity
+ Disable:Active LOW.\n
+ Enable:Active HIGH
+ $EN_DIS
+**/
+ UINT8 TsodEventPolarity;
+
+/** Offset 0x0165 - Critical event only
+ Disable:Trips on alarm or critical.\n
+ Enable:Trips only if criticaal temperature is reached
+ $EN_DIS
+**/
+ UINT8 TsodCriticalEventOnly;
+
+/** Offset 0x0166 - Event output control
+ Disable:Event output disable.\n
+ Enable:Event output enabled
+ $EN_DIS
+**/
+ UINT8 TsodEventOutputControl;
+
+/** Offset 0x0167 - Alarm window lock bit
+ Disable:Alarm trips are not locked and can be changed.\n
+ Enable:Alarm trips are locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodAlarmwindowLockBit;
+
+/** Offset 0x0168 - Critical trip lock bit
+ Disable:Critical trip is not locked and can be changed.\n
+ Enable:Critical trip is locked and cannot be changed
+ $EN_DIS
+**/
+ UINT8 TsodCriticaltripLockBit;
+
+/** Offset 0x0169 - Shutdown mode
+ Disable:Temperature sensor enable.\n
+ Enable:Temperature sensor disable
+ $EN_DIS
+**/
+ UINT8 TsodShutdownMode;
+
+/** Offset 0x016A - ThighMax
+ Thigh = ThighMax (Default is 93)
+**/
+ UINT8 TsodThigMax;
+
+/** Offset 0x016B - User Manual Thig and Tcrit
+ Disabled(Default): Temperature will be given by the configuration of memories and
+ 1x or 2xrefresh rate.\n
+ Enabled: User Input will define for Thigh and Tcrit.
+ $EN_DIS
+**/
+ UINT8 TsodManualEnable;
+
+/** Offset 0x016C - Force OLTM or 2X Refresh when needed
+ Disabled(Default): = Force OLTM.\n
+ Enabled: = Force 2x Refresh.
+ $EN_DIS
+**/
+ UINT8 ForceOltmOrRefresh2x;
+
+/** Offset 0x016D - Pwr Down Idle Timer
+ The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
+ AUTO: 64 for ULX/ULT, 128 for DT/Halo
+**/
+ UINT8 PwdwnIdleCounter;
+
+/** Offset 0x016E - Bitmask of ranks that have CA bus terminated
+ Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
+ Rank0 is terminating and Rank1 is non-terminating</b>
+**/
+ UINT8 CmdRanksTerminated;
+
+/** Offset 0x016F - RMTLoopCount
+ Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
+**/
+ UINT8 RMTLoopCount;
+
+/** Offset 0x0170 - Throttler CKEMin Timer for LPDDR
+ LPDDR Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH
+ (4). Dfault is 0x40
+**/
+ UINT8 ThrtCkeMinTmrLpddr;
+
+/** Offset 0x0171 - Retrain on Fast Fail
+ Restart MRC in Cold mode if SW MemTest fails during Fast flow. Default = Enabled
+ $EN_DIS
+**/
+ UINT8 RetrainOnFastFail;
+
+/** Offset 0x0172 - Rank Margin Tool Per Bit
+ Enable/disable Rank Margin Tool Per Bit.
+ $EN_DIS
+**/
+ UINT8 RMTBIT;
+
+/** Offset 0x0173
+**/
+ UINT8 MrcPreMemRsvd[14];
+
+/** Offset 0x0181 - Over clocking support
+ Over clocking support; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 OcSupport;
+
+/** Offset 0x0182 - Over clocking Lock
+ Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 OcLock;
+
+/** Offset 0x0183 - Maximum Core Turbo Ratio Override
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 CoreMaxOcRatio;
+
+/** Offset 0x0184 - Core voltage mode
+ Core voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 CoreVoltageMode;
+
+/** Offset 0x0185 - Maximum clr turbo ratio override
+ Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 RingMaxOcRatio;
+
+/** Offset 0x0186 - Ring Downbin
+ Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
+ $EN_DIS
+**/
+ UINT8 RingDownBin;
+
+/** Offset 0x0187 - Ring voltage mode
+ Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 RingVoltageMode;
+
+/** Offset 0x0188 - Ring voltage override
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageOverride;
+
+/** Offset 0x018A - Ring Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageAdaptive;
+
+/** Offset 0x018C - Ring Turbo voltage Offset
+ The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
+**/
+ UINT16 RingVoltageOffset;
+
+/** Offset 0x018E - core voltage override
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageOverride;
+
+/** Offset 0x0190 - Core Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageAdaptive;
+
+/** Offset 0x0192 - Core Turbo voltage Offset
+ The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
+**/
+ UINT16 CoreVoltageOffset;
+
+/** Offset 0x0194 - Core PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 CorePllVoltageOffset;
+
+/** Offset 0x0195 - GT PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 GtPllVoltageOffset;
+
+/** Offset 0x0196 - Ring PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 RingPllVoltageOffset;
+
+/** Offset 0x0197 - System Agent PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 SaPllVoltageOffset;
+
+/** Offset 0x0198 - Memory Controller PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 McPllVoltageOffset;
+
+/** Offset 0x0199 - BCLK Adaptive Voltage Enable
+ When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
+ Disable;<b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 BclkAdaptiveVoltage;
+
+/** Offset 0x019A - AVX2 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx2RatioOffset;
+
+/** Offset 0x019B - AVX3 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx3RatioOffset;
+
+/** Offset 0x019C - TjMax Offset
+ TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
+ TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
+**/
+ UINT8 TjMaxOffset;
+
+/** Offset 0x019D - Fivr Faults
+ Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrFaults;
+
+/** Offset 0x019E - Fivr Efficiency
+ Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrEfficiency;
+
+/** Offset 0x019F
+**/
+ UINT8 UnusedUpdSpace7;
+
+/** Offset 0x01A0 - VccIn Voltage Override
+ This will override VccIn output voltage level to the voltage value specified. Valid
+ Range 0 to 3000
+**/
+ UINT16 VccInVoltageOverride;
+
+/** Offset 0x01A2 - Avx2 Voltage Guardband Scaling Factor
+ AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
+ 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx2VoltageScaleFactor;
+
+/** Offset 0x01A3 - Avx512 Voltage Guardband Scaling Factor
+ AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200
+ in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx512VoltageScaleFactor;
+
+/** Offset 0x01A4 - Non-Core High Voltage Mode
+ Enable High Voltage Mode in the non-core FIVR domains (Ring/GT). Used for LN2 cold
+ boot mitigation. <b>0 - Disable</b>, 1 - Enable
+ $EN_DIS
+**/
+ UINT8 NonCoreHighVoltageMode;
+
+/** Offset 0x01A5 - Core High Voltage Mode
+ Enable High Voltage Mode in the core FIVR Domains. Used for LN2 cold boot mitigation.
+ <b>0 - Disable</b>, 1 - Enable
+ $EN_DIS
+**/
+ UINT8 CoreHighVoltageMode;
+
+/** Offset 0x01A6 - Per Core Ratio Limit
+ Per Core Ratio Limit. Range 0 - 120. <b>Default = 0</b>, no BIOS programming of
+ per core ratio.
+**/
+ UINT8 PerCoreRatioLimit[8];
+
+/** Offset 0x01AE - FIVR TDC
+ Enable or Disable FIVR TDC from PCODE. <b>0: Disable</b>. 1: Enable.
+ $EN_DIS
+**/
+ UINT8 FivrTdc;
+
+/** Offset 0x01AF - Full Range Multiplier unlock enable
+ Enable or Disable communication between Punit and Core in 100MHz granularity. <b>0:
+ Disable</b>. 1: Enable.
+ $EN_DIS
+**/
+ UINT8 FullRangeMultiplierUnlockEn;
+
+/** Offset 0x01B0 - SA PLL Freq override
+ Enable or Disable SA PLL Freq override to 1600MHz instead of 3200MHz on Desktop.
+ <b>0: Disable</b>. 1: Enable.
+ $EN_DIS
+**/
+ UINT8 SaPllFreqOverride;
+
+/** Offset 0x01B1 - XHCI PLL override
+ Enable or Disable XHCI PLL override to use TMU PLL instead of SA PLL. <b>0: Disable</b>.
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 XhciPllOverride;
+
+/** Offset 0x01B2 - FIVR PS
+ Enable or Disable FIVR PS. <b>0: Disable</b>. 1: Enable.
+ $EN_DIS
+**/
+ UINT8 FivrPs;
+
+/** Offset 0x01B3 - FIVR PROTECTION
+ Enable or Disable FIVR overvoltage and overcurrent protection. <b>0: Disable</b>.
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 FivrProtection;
+
+/** Offset 0x01B4 - TSC HW Fixup
+ Enable or Disable Core HW Fixup during TSC copy from PMA and APIC. <b>0: Disable</b>.
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TscHwFixup;
+
+/** Offset 0x01B5
+**/
+ UINT8 UnusedUpdSpace8;
+
+/** Offset 0x01B6 - VccIN VR MAX Voltage
+ The new VccIN VR MAX Voltage to allow requesting in U3.13V format. Valid Range is
+ in U3.13 from 0 to 7999V.
+**/
+ UINT16 VccinVrMaxVoltage;
+
+/** Offset 0x01B8 - Post Divider (PVD) Ratio Threshold
+ PVD Ratio Threshold. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 PvdRatioThreshold;
+
+/** Offset 0x01B9 - Hyper Threading Enable/Disable
+ Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 HyperThreading;
+
+/** Offset 0x01BA - Boot frequency
+ Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.-
+ <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo
+ is selected BIOS will start in max non-turbo mode and switch to Turbo mode.
+ 0:0, 1:1, 2:2
+**/
+ UINT8 BootFrequency;
+
+/** Offset 0x01BB - Number of active cores
+ Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2:
+ 2 </b>;<b>3: 3 </b>
+ 0:All, 1:1, 2:2, 3:3
+**/
+ UINT8 ActiveCoreCount;
+
+/** Offset 0x01BC - Processor Early Power On Configuration FCLK setting
+ <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
+ 2: 400 MHz. - 3: Reserved
+ 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved
+**/
+ UINT8 FClkFrequency;
+
+/** Offset 0x01BD - Set JTAG power in C10 and deeper power states
+ False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
+ and deeper power states for debug purpose. <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 JtagC10PowerGateDisable;
+
+/** Offset 0x01BE - BIST on Reset
+ Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 BistOnReset;
+
+/** Offset 0x01BF - Enable or Disable VMX
+ Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 VmxEnable;
+
+/** Offset 0x01C0 - CPU ratio value
+ CPU ratio value. Valid Range 0 to 63
+**/
+ UINT8 CpuRatio;
+
+/** Offset 0x01C1 - Enable or Disable TME
+ Enable or Disable TME; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TmeEnable;
+
+/** Offset 0x01C2 - Enable CPU CrashLog
+ Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x01C3 - CPU Run Control
+ Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
+ No Change</b>
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x01C4 - CPU Run Control Lock
+ Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
+
+/** Offset 0x01C5 - Skip Multi-Processor Initialization
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. </b>0: Initialize; <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInitPreMem;
+
+/** Offset 0x01C6
+**/
+ UINT8 CpuPreMemRsvd[13];
+
+/** Offset 0x01D3 - Skip Stop PBET Timer Enable/Disable
+ Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 SkipStopPbet;
+
+/** Offset 0x01D4 - C6DRAM power gating feature
+ This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
+ power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating
+ feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>.
+ $EN_DIS
+**/
+ UINT8 EnableC6Dram;
+
+/** Offset 0x01D5 - BiosGuard
+ Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 BiosGuard;
+
+/** Offset 0x01D6
+**/
+ UINT8 BiosGuardToolsInterface;
+
+/** Offset 0x01D7 - EnableSgx
+ Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control
+ 0: Disable, 1: Enable, 2: Software Control
+**/
+ UINT8 EnableSgx;
+
+/** Offset 0x01D8 - Txt
+ Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 Txt;
+
+/** Offset 0x01D9
+**/
+ UINT8 UnusedUpdSpace9[3];
+
+/** Offset 0x01DC - PrmrrSize
+ Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
+**/
+ UINT32 PrmrrSize;
+
+/** Offset 0x01E0 - TxtAcheckRequest
+ Enable/Disable. When Enabled, it will forcing calling TXT Acheck once.
+ $EN_DIS
+**/
+ UINT8 TxtAcheckRequest;
+
+/** Offset 0x01E1
+**/
+ UINT8 UnusedUpdSpace10;
+
+/** Offset 0x01E2 - BiosSize
+ Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable
+**/
+ UINT16 BiosSize;
+
+/** Offset 0x01E4 - SinitMemorySize
+ Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable
+**/
+ UINT32 SinitMemorySize;
+
+/** Offset 0x01E8 - TxtHeapMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
+**/
+ UINT32 TxtHeapMemorySize;
+
+/** Offset 0x01EC
+**/
+ UINT8 UnusedUpdSpace11[4];
+
+/** Offset 0x01F0 - TxtDprMemoryBase
+ Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
+**/
+ UINT64 TxtDprMemoryBase;
+
+/** Offset 0x01F8 - TxtDprMemorySize
+ Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable
+**/
+ UINT32 TxtDprMemorySize;
+
+/** Offset 0x01FC - BiosAcmBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 BiosAcmBase;
+
+/** Offset 0x0200 - BiosAcmSize
+ Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
+**/
+ UINT32 BiosAcmSize;
+
+/** Offset 0x0204 - TgaSize
+ Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
+**/
+ UINT32 TgaSize;
+
+/** Offset 0x0208 - TxtLcpPdBase
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
+**/
+ UINT64 TxtLcpPdBase;
+
+/** Offset 0x0210 - TxtLcpPdSize
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
+**/
+ UINT64 TxtLcpPdSize;
+
+/** Offset 0x0218 - ApStartupBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 ApStartupBase;
+
+/** Offset 0x021C - IsTPMPresence
+ IsTPMPresence default values
+**/
+ UINT8 IsTPMPresence;
+
+/** Offset 0x021D
+**/
+ UINT8 SecurityPreMemRsvd[16];
+
+/** Offset 0x022D
+**/
+ UINT8 UnusedUpdSpace12[3];
+
+/** Offset 0x0230 - Intel Enhanced Debug
+ Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied
+ 0 : Disable, 0x400000 : Enable
+**/
+ UINT32 IedSize;
+
+/** Offset 0x0234 - Board Type
+ MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
+ Halo, 7=UP Server
+ 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server
+**/
+ UINT8 UserBd;
+
+/** Offset 0x0235 - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x0236 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 DmaControlGuarantee;
+
+/** Offset 0x0237
+**/
+ UINT8 UnusedUpdSpace13[1];
+
+/** Offset 0x0238 - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[9];
+
+/** Offset 0x025C - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x025D - Internal Graphics Pre-allocated Memory
+ Size of memory preallocated for internal graphics.
+ 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB,
+ 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB,
+ 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB
+**/
+ UINT8 IgdDvmt50PreAlloc;
+
+/** Offset 0x025E - Internal Graphics
+ Enable/disable internal graphics.
+ $EN_DIS
+**/
+ UINT8 InternalGfx;
+
+/** Offset 0x025F - Aperture Size
+ Select the Aperture Size.
+ 0:128 MB, 1:256 MB, 2:512 MB
+**/
+ UINT8 ApertureSize;
+
+/** Offset 0x0260 - Selection of the primary display device
+ 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
+ 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
+**/
+ UINT8 PrimaryDisplay;
+
+/** Offset 0x0261
+**/
+ UINT8 UnusedUpdSpace14[3];
+
+/** Offset 0x0264 - Temporary MMIO address for GTTMMADR
+ The reference code will use this as Temporary MMIO address space to access GTTMMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
+ to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
+ + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
+**/
+ UINT32 GttMmAdr;
+
+/** Offset 0x0268 - Temporary MMIO address for GMADR
+ The reference code will use this as Temporary MMIO address space to access GMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to
+ (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress
+ - 0x1) (Where ApertureSize = 256MB)
+**/
+ UINT32 GmAdr;
+
+/** Offset 0x026C - Selection of iGFX GTT Memory size
+ 1=2MB, 2=4MB, 3=8MB, Default is 3
+ 1:2MB, 2:4MB, 3:8MB
+**/
+ UINT16 GttSize;
+
+/** Offset 0x026E - Selection of PSMI Region size
+ 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
+ 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
+**/
+ UINT8 PsmiRegionSize;
+
+/** Offset 0x026F - Selection of PSMI Support On/Off
+ 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
+ $EN_DIS
+**/
+ UINT8 GtPsmiSupport;
+
+/** Offset 0x0270 - Panel Power Enable
+ Control for enabling/disabling VDD force bit (Required only for early enabling of
+ eDP panel). 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 PanelPowerEnable;
+
+/** Offset 0x0271 - PCIe root port Function number for Hybrid Graphics dGPU
+ Root port Index number to indicate which PCIe root port has dGPU
+**/
+ UINT8 RootPortIndex;
+
+/** Offset 0x0272
+**/
+ UINT8 UnusedUpdSpace15[2];
+
+/** Offset 0x0274 - Hybrid Graphics GPIO information for PEG 0
+ Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs
+**/
+ UINT32 SaRtd3Pcie0Gpio[24];
+
+/** Offset 0x02D4 - Hybrid Graphics GPIO information for PEG 1
+ Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs
+**/
+ UINT32 SaRtd3Pcie1Gpio[24];
+
+/** Offset 0x0334 - Hybrid Graphics GPIO information for PEG 2
+ Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs
+**/
+ UINT32 SaRtd3Pcie2Gpio[24];
+
+/** Offset 0x0394 - Hybrid Graphics GPIO information for PEG 3
+ Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs
+**/
+ UINT32 SaRtd3Pcie3Gpio[24];
+
+/** Offset 0x03F4 - HG dGPU Power Delay
+ HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
+ 300=300 microseconds
+**/
+ UINT16 HgDelayAfterPwrEn;
+
+/** Offset 0x03F6 - HG dGPU Reset Delay
+ HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
+ microseconds
+**/
+ UINT16 HgDelayAfterHoldReset;
+
+/** Offset 0x03F8 - MMIO size adjustment for AUTO mode
+ Positive number means increasing MMIO size, Negative value means decreasing MMIO
+ size: 0 (Default)=no change to AUTO mode MMIO size
+**/
+ UINT16 MmioSizeAdjustment;
+
+/** Offset 0x03FA - MMIO Size
+ Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
+**/
+ UINT16 MmioSize;
+
+/** Offset 0x03FC - Tseg Size
+ Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build
+ 0x0400000:4MB, 0x01000000:16MB
+**/
+ UINT32 TsegSize;
+
+/** Offset 0x0400 - Enable/Disable MRC TXT dependency
+ When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
+ MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
+ $EN_DIS
+**/
+ UINT8 TxtImplemented;
+
+/** Offset 0x0401 - Skip external display device scanning
+ Enable: Do not scan for external display device, Disable (Default): Scan external
+ display devices
+ $EN_DIS
+**/
+ UINT8 SkipExtGfxScan;
+
+/** Offset 0x0402 - Generate BIOS Data ACPI Table
+ Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
+ $EN_DIS
+**/
+ UINT8 BdatEnable;
+
+/** Offset 0x0403 - BdatTestType
+ Indicates the type of Memory Training data to populate into the BDAT ACPI table.
+ 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
+**/
+ UINT8 BdatTestType;
+
+/** Offset 0x0404 - Detect External Graphics device for LegacyOpROM
+ Detect and report if external graphics device only support LegacyOpROM or not (to
+ support CSM auto-enable). Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 ScanExtGfxForLegacyOpRom;
+
+/** Offset 0x0405 - Lock PCU Thermal Management registers
+ Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
+ $EN_DIS
+**/
+ UINT8 LockPTMregs;
+
+/** Offset 0x0406 - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+ Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiGen3ProgramStaticEq;
+
+/** Offset 0x0407 - Enable/Disable PEG 0
+ Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits
+ it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise
+ 0:Disable, 1:Enable, 2:AUTO
+**/
+ UINT8 Peg0Enable;
+
+/** Offset 0x0408 - Enable/Disable PEG 1
+ Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits
+ it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise
+ 0:Disable, 1:Enable, 2:AUTO
+**/
+ UINT8 Peg1Enable;
+
+/** Offset 0x0409 - Enable/Disable PEG 2
+ Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits
+ it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise
+ 0:Disable, 1:Enable, 2:AUTO
+**/
+ UINT8 Peg2Enable;
+
+/** Offset 0x040A - Enable/Disable PEG 3
+ Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits
+ it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise
+ 0:Disable, 1:Enable, 2:AUTO
+**/
+ UINT8 Peg3Enable;
+
+/** Offset 0x040B - PEG 0 Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 Peg0MaxLinkSpeed;
+
+/** Offset 0x040C - PEG 1 Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 Peg1MaxLinkSpeed;
+
+/** Offset 0x040D - PEG 2 Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 Peg2MaxLinkSpeed;
+
+/** Offset 0x040E - PEG 3 Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 Peg3MaxLinkSpeed;
+
+/** Offset 0x040F - PEG 0 Max Link Width
+ Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2):
+ Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8
+ 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8
+**/
+ UINT8 Peg0MaxLinkWidth;
+
+/** Offset 0x0410 - PEG 1 Max Link Width
+ Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2):
+ Limit Link to x2, (0x3):Limit Link to x4
+ 0:Auto, 1:x1, 2:x2, 3:x4
+**/
+ UINT8 Peg1MaxLinkWidth;
+
+/** Offset 0x0411 - PEG 2 Max Link Width
+ Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2):
+ Limit Link to x2
+ 0:Auto, 1:x1, 2:x2
+**/
+ UINT8 Peg2MaxLinkWidth;
+
+/** Offset 0x0412 - PEG 3 Max Link Width
+ Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2):
+ Limit Link to x2
+ 0:Auto, 1:x1, 2:x2
+**/
+ UINT8 Peg3MaxLinkWidth;
+
+/** Offset 0x0413 - Power down unused lanes on PEG 0
+ (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based
+ on the max possible link width
+ 0:No power saving, 1:Auto
+**/
+ UINT8 Peg0PowerDownUnusedLanes;
+
+/** Offset 0x0414 - Power down unused lanes on PEG 1
+ (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based
+ on the max possible link width
+ 0:No power saving, 1:Auto
+**/
+ UINT8 Peg1PowerDownUnusedLanes;
+
+/** Offset 0x0415 - Power down unused lanes on PEG 2
+ (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based
+ on the max possible link width
+ 0:No power saving, 1:Auto
+**/
+ UINT8 Peg2PowerDownUnusedLanes;
+
+/** Offset 0x0416 - Power down unused lanes on PEG 3
+ (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based
+ on the max possible link width
+ 0:No power saving, 1:Auto
+**/
+ UINT8 Peg3PowerDownUnusedLanes;
+
+/** Offset 0x0417 - PCIe ASPM programming will happen in relation to the Oprom
+ Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
+ Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
+ Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
+ 0:Before, 1:After
+**/
+ UINT8 InitPcieAspmAfterOprom;
+
+/** Offset 0x0418 - PCIe Disable Spread Spectrum Clocking
+ PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled,
+ Disable SSC(0X1) - Disable SSC per platform design or for compliance testing
+ 0:Normal Operation, 1:Disable SSC
+**/
+ UINT8 PegDisableSpreadSpectrumClocking;
+
+/** Offset 0x0419 - DMI Gen3 Root port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+**/
+ UINT8 DmiGen3RootPortPreset[8];
+
+/** Offset 0x0421 - DMI Gen3 End port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 DmiGen3EndPointPreset[8];
+
+/** Offset 0x0429 - DMI Gen3 End port Hint values per lane
+ Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 DmiGen3EndPointHint[8];
+
+/** Offset 0x0431 - DMI Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 DmiGen3RxCtlePeaking[4];
+
+/** Offset 0x0435 - PEG Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 12 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 PegGen3RxCtlePeaking[10];
+
+/** Offset 0x043F
+**/
+ UINT8 UnusedUpdSpace16;
+
+/** Offset 0x0440 - Memory data pointer for saved preset search results
+ The reference code will store the Gen3 Preset Search results in the SaDataHob's
+ PegData structure (SA_PEG_DATA) and platform code can save/restore this data to
+ skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0
+**/
+ UINT32 PegDataPtr;
+
+/** Offset 0x0444 - PEG PERST# GPIO information
+ The reference code will use the information in this structure in order to reset
+ PCIe Gen3 devices during equalization, if necessary
+**/
+ UINT8 PegGpioData[28];
+
+/** Offset 0x0460 - DeEmphasis control for DMI
+ DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
+ 0: -6dB, 1: -3.5dB
+**/
+ UINT8 DmiDeEmphasis;
+
+/** Offset 0x0461 - PCIe Hot Plug Enable/Disable per port
+ 0(Default): Disable, 1: Enable
+**/
+ UINT8 PegRootPortHPE[4];
+
+/** Offset 0x0465 - DMI Max Link Speed
+ Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1
+ Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 DmiMaxLinkSpeed;
+
+/** Offset 0x0466 - DMI Equalization Phase 2
+ DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
+ AUTO - Use the current default method
+ 0:Disable phase2, 1:Enable phase2, 2:Auto
+**/
+ UINT8 DmiGen3EqPh2Enable;
+
+/** Offset 0x0467 - DMI Gen3 Equalization Phase3
+ DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 DmiGen3EqPh3Method;
+
+/** Offset 0x0468 - Phase2 EQ enable on the PEG 0:1:0.
+ Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1):
+ Enable phase 2, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 Peg0Gen3EqPh2Enable;
+
+/** Offset 0x0469 - Phase2 EQ enable on the PEG 0:1:1.
+ Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1):
+ Enable phase 2, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 Peg1Gen3EqPh2Enable;
+
+/** Offset 0x046A - Phase2 EQ enable on the PEG 0:1:2.
+ Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1):
+ Enable phase 2, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 Peg2Gen3EqPh2Enable;
+
+/** Offset 0x046B - Phase2 EQ enable on the PEG 0:1:3.
+ Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1):
+ Enable phase 2, Auto(0x2)(Default): Use the current default method
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 Peg3Gen3EqPh2Enable;
+
+/** Offset 0x046C - Phase3 EQ method on the PEG 0:1:0.
+ PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 Peg0Gen3EqPh3Method;
+
+/** Offset 0x046D - Phase3 EQ method on the PEG 0:1:1.
+ PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 Peg1Gen3EqPh3Method;
+
+/** Offset 0x046E - Phase3 EQ method on the PEG 0:1:2.
+ PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 Peg2Gen3EqPh3Method;
+
+/** Offset 0x046F - Phase3 EQ method on the PEG 0:1:3.
+ PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 Peg3Gen3EqPh3Method;
+
+/** Offset 0x0470 - Enable/Disable PEG GEN3 Static EQ Phase1 programming
+ Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 PegGen3ProgramStaticEq;
+
+/** Offset 0x0471 - PEG Gen3 SwEq Always Attempt
+ Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default):
+ Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test
+ and generate new EQ values every boot, not recommended
+ 0:Disable, 1:Enable
+**/
+ UINT8 Gen3SwEqAlwaysAttempt;
+
+/** Offset 0x0472 - Select number of TxEq presets to test in the PCIe/DMI SwEq
+ Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test
+ Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the
+ current default method (Default)Auto will test Presets 7, 3, and 5. It is possible
+ for this default to change over time;using Auto will ensure Reference Code always
+ uses the latest default settings
+ 0:P7 P3 P5, 1:P0 to P9, 2:Auto
+**/
+ UINT8 Gen3SwEqNumberOfPresets;
+
+/** Offset 0x0473 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq
+ Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization
+ Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default):
+ Use the current default
+ 0:Disable, 1:Enable, 2:Auto
+**/
+ UINT8 Gen3SwEqEnableVocTest;
+
+/** Offset 0x0474 - PCIe Rx Compliance Testing Mode
+ Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1):
+ PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode;
+ it should only be set when doing PCIe compliance testing
+ $EN_DIS
+**/
+ UINT8 PegRxCemTestingMode;
+
+/** Offset 0x0475 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled
+ the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0
+**/
+ UINT8 PegRxCemLoopbackLane;
+
+/** Offset 0x0476 - Generate PCIe BDAT Margin Table
+ Set this policy to enable the generation and addition of PCIe margin data to the
+ BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin
+ data generation, Enable(0x1): Generate PCIe BDAT margin data
+ $EN_DIS
+**/
+ UINT8 PegGenerateBdatMarginTable;
+
+/** Offset 0x0477 - PCIe Non-Protocol Awareness for Rx Compliance Testing
+ Set this policy to enable the generation and addition of PCIe margin data to the
+ BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness,
+ Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for
+ compliance testing
+ $EN_DIS
+**/
+ UINT8 PegRxCemNonProtocolAwareness;
+
+/** Offset 0x0478 - PCIe Override RxCTLE
+ Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1):
+ Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE
+ peak values unmodified
+ $EN_DIS
+**/
+ UINT8 PegGen3RxCtleOverride;
+
+/** Offset 0x0479 - PEG Gen3 Root port preset values per lane
+ Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
+**/
+ UINT8 PegGen3RootPortPreset[20];
+
+/** Offset 0x048D - PEG Gen3 End port preset values per lane
+ Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 PegGen3EndPointPreset[20];
+
+/** Offset 0x04A1 - PEG Gen3 End port Hint values per lane
+ Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 PegGen3EndPointHint[20];
+
+/** Offset 0x04B5
+**/
+ UINT8 UnusedUpdSpace17;
+
+/** Offset 0x04B6 - Jitter Dwell Time for PCIe Gen3 Software Equalization
+ Range: 0-65535, default is 1000. @warning Do not change from the default
+**/
+ UINT16 Gen3SwEqJitterDwellTime;
+
+/** Offset 0x04B8 - Jitter Error Target for PCIe Gen3 Software Equalization
+ Range: 0-65535, default is 1. @warning Do not change from the default
+**/
+ UINT16 Gen3SwEqJitterErrorTarget;
+
+/** Offset 0x04BA - VOC Dwell Time for PCIe Gen3 Software Equalization
+ Range: 0-65535, default is 10000. @warning Do not change from the default
+**/
+ UINT16 Gen3SwEqVocDwellTime;
+
+/** Offset 0x04BC - VOC Error Target for PCIe Gen3 Software Equalization
+ Range: 0-65535, default is 2. @warning Do not change from the default
+**/
+ UINT16 Gen3SwEqVocErrorTarget;
+
+/** Offset 0x04BE - Enable/Disable SA IPU
+ Enable(Default): Enable SA IPU, Disable: Disable SA IPU
+ $EN_DIS
+**/
+ UINT8 SaIpuEnable;
+
+/** Offset 0x04BF - IPU IMR Configuration
+ 0:IPU Camera, 1:IPU Gen Default is 0
+ 0:IPU Camera, 1:IPU Gen
+**/
+ UINT8 SaIpuImrConfiguration;
+
+/** Offset 0x04C0 - IMGU CLKOUT Configuration
+ The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ImguClkOutEn[5];
+
+/** Offset 0x04C5 - CPU Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode
+**/
+ UINT8 CpuTraceHubMode;
+
+/** Offset 0x04C6 - CPU Trace Hub Memory Region 0
+ CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg0Size;
+
+/** Offset 0x04C7 - CPU Trace Hub Memory Region 1
+ CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg1Size;
+
+/** Offset 0x04C8 - Enable/Disable SA OcSupport
+ Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
+ $EN_DIS
+**/
+ UINT8 SaOcSupport;
+
+/** Offset 0x04C9 - GT slice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtVoltageMode;
+
+/** Offset 0x04CA - Maximum GTs turbo ratio override
+ 0(Default)=Minimal/Auto, 42=Maximum
+**/
+ UINT8 GtMaxOcRatio;
+
+/** Offset 0x04CB
+**/
+ UINT8 UnusedUpdSpace18;
+
+/** Offset 0x04CC - The voltage offset applied to GT slice
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 GtVoltageOffset;
+
+/** Offset 0x04CE - The GT slice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtVoltageOverride;
+
+/** Offset 0x04D0 - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtExtraTurboVoltage;
+
+/** Offset 0x04D2 - voltage offset applied to the SA
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 SaVoltageOffset;
+
+/** Offset 0x04D4 - Realtime Memory Timing
+ 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
+ realtime memory timing changes after MRC_DONE.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 RealtimeMemoryTiming;
+
+/** Offset 0x04D5 - TCSS Thunderbolt PCIE Root Port 0 Enable
+ Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie0En;
+
+/** Offset 0x04D6 - TCSS Thunderbolt PCIE Root Port 1 Enable
+ Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie1En;
+
+/** Offset 0x04D7 - TCSS Thunderbolt PCIE Root Port 2 Enable
+ Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie2En;
+
+/** Offset 0x04D8 - TCSS Thunderbolt PCIE Root Port 3 Enable
+ Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssItbtPcie3En;
+
+/** Offset 0x04D9 - TCSS USB HOST (xHCI) Enable
+ Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below
+ $EN_DIS
+**/
+ UINT8 TcssXhciEn;
+
+/** Offset 0x04DA - TCSS USB DEVICE (xDCI) Enable
+ Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled
+ $EN_DIS
+**/
+ UINT8 TcssXdciEn;
+
+/** Offset 0x04DB - TCSS DMA0 Enable
+ Set TCSS DMA0. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma0En;
+
+/** Offset 0x04DC - TCSS DMA1 Enable
+ Set TCSS DMA1. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssDma1En;
+
+/** Offset 0x04DD - This is policy to control iTBT PCIe Multiple Segment setting.
+ When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the
+ TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieMultipleSegmentEnabled;
+
+/** Offset 0x04DE - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x04DF - TCSS USB Port Enable
+ Bitmap for per port enabling
+**/
+ UINT8 UsbTcPortEnPreMem;
+
+/** Offset 0x04E0 - PEG IMR support
+ This option configures the IMR support for PEG.(def=Disable)
+ $EN_DIS
+**/
+ UINT8 PegImrEnable;
+
+/** Offset 0x04E1 - PEG Root port number for IMR.
+ PEG Root port number for IMR.
+**/
+ UINT8 PegImrRpSelection;
+
+/** Offset 0x04E2 - PEG IMR size
+ The size of IMR to be allocated for PEG EndPoint device
+**/
+ UINT16 PegImrSize;
+
+/** Offset 0x04E4 - Enable above 4GB MMIO resource support
+ Enable/disable above 4GB MMIO resource support
+ $EN_DIS
+**/
+ UINT8 EnableAbove4GBMmio;
+
+/** Offset 0x04E5
+**/
+ UINT8 SaPreMemRsvd[31];
+
+/** Offset 0x0504 - HECI Timeouts
+ 0: Disable, 1: Enable (Default) timeout check for HECI
+ $EN_DIS
+**/
+ UINT8 HeciTimeouts;
+
+/** Offset 0x0505 - Force ME DID Init Status
+ Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
+ ME DID init stat value
+ $EN_DIS
+**/
+ UINT8 DidInitStat;
+
+/** Offset 0x0506 - CPU Replaced Polling Disable
+ Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
+ $EN_DIS
+**/
+ UINT8 DisableCpuReplacedPolling;
+
+/** Offset 0x0507 - ME DID Message
+ Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent
+ the DID message from being sent)
+ $EN_DIS
+**/
+ UINT8 SendDidMsg;
+
+/** Offset 0x0508 - Check HECI message before send
+ Test, 0: disable, 1: enable, Enable/Disable message check.
+ $EN_DIS
+**/
+ UINT8 DisableMessageCheck;
+
+/** Offset 0x0509 - Skip MBP HOB
+ Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
+ $EN_DIS
+**/
+ UINT8 SkipMbpHob;
+
+/** Offset 0x050A - HECI2 Interface Communication
+ Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
+ $EN_DIS
+**/
+ UINT8 HeciCommunication2;
+
+/** Offset 0x050B - Enable KT device
+ Test, 0: disable, 1: enable, Enable or Disable KT device.
+ $EN_DIS
+**/
+ UINT8 KtDeviceEnable;
+
+/** Offset 0x050C - HECI1 BAR address
+ BAR address of HECI1
+**/
+ UINT32 Heci1BarAddress;
+
+/** Offset 0x0510 - HECI2 BAR address
+ BAR address of HECI2
+**/
+ UINT32 Heci2BarAddress;
+
+/** Offset 0x0514 - HECI3 BAR address
+ BAR address of HECI3
+**/
+ UINT32 Heci3BarAddress;
+
+/** Offset 0x0518
+**/
+ UINT8 MePreMemRsvd[16];
+
+/** Offset 0x0528 - PCH Trace Hub Mode
+ Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
+ if Trace Hub is used by target debugger software or 'Disable' trace hub functionality.
+ 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode
+**/
+ UINT8 PchTraceHubMode;
+
+/** Offset 0x0529 - PCH Trace Hub Memory Region 0 buffer Size
+ Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg0Size;
+
+/** Offset 0x052A - PCH Trace Hub Memory Region 1 buffer Size
+ Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg1Size;
+
+/** Offset 0x052B - Enable SMBus
+ Enable/disable SMBus controller.
+ $EN_DIS
+**/
+ UINT8 SmbusEnable;
+
+/** Offset 0x052C - Enable SMBus ARP support
+ Enable SMBus ARP support.
+ $EN_DIS
+**/
+ UINT8 SmbusArpEnable;
+
+/** Offset 0x052D - Smbus dynamic power gating
+ Disable or Enable Smbus dynamic power gating.
+ $EN_DIS
+**/
+ UINT8 SmbusDynamicPowerGating;
+
+/** Offset 0x052E - SMBUS SPD Write Disable
+ Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
+ Disable bit. For security recommendations, SPD write disable bit must be set.
+ $EN_DIS
+**/
+ UINT8 SmbusSpdWriteDisable;
+
+/** Offset 0x052F - Enable SMBus Alert Pin
+ Enable SMBus Alert Pin.
+ $EN_DIS
+**/
+ UINT8 PchSmbAlertEnable;
+
+/** Offset 0x0530 - SMBUS Base Address
+ SMBUS Base Address (IO space).
+**/
+ UINT16 PchSmbusIoBase;
+
+/** Offset 0x0532 - Number of RsvdSmbusAddressTable.
+ The number of elements in the RsvdSmbusAddressTable.
+**/
+ UINT8 PchNumRsvdSmbusAddresses;
+
+/** Offset 0x0533
+**/
+ UINT8 UnusedUpdSpace19;
+
+/** Offset 0x0534 - Point of RsvdSmbusAddressTable
+ Array of addresses reserved for non-ARP-capable SMBus devices.
+**/
+ UINT32 RsvdSmbusAddressTablePtr;
+
+/** Offset 0x0538 - DCI Enable
+ Determine if to enable DCI debug from host
+ $EN_DIS
+**/
+ UINT8 DciEn;
+
+/** Offset 0x0539 - Enable DCI ModPHY Pwoer Gate
+ Enable ModPHY Pwoer Gate when DCI is enabled
+ $EN_DIS
+**/
+ UINT8 DciModphyPg;
+
+/** Offset 0x053A - DCI DbC Mode
+ Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
+ Set both USB2/3DBCEN; No Change: Comply with HW value,for PCH-LP ICL U/Y board
+ with D0 stepping need to Disable it by default
+ 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
+**/
+ UINT8 DciDbcMode;
+
+/** Offset 0x053B - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+ This BIOS option enables kernel and platform debug for USB3 interface over a UFP
+ Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DciUsb3TypecUfpDbg;
+
+/** Offset 0x053C - Enable PCIE RP Mask
+ Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
+ for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpEnableMask;
+
+/** Offset 0x0540 - Enable PCIe IMR
+ 0:Disable, 1:Enable
+ $EN_DIS
+**/
+ UINT8 PcieImrEnabled;
+
+/** Offset 0x0541
+**/
+ UINT8 UnusedUpdSpace20;
+
+/** Offset 0x0542 - Size of PCIe IMR.
+ Size of PCIe IMR in megabytes
+**/
+ UINT16 PcieImrSize;
+
+/** Offset 0x0544 - Root port number for IMR.
+ Root port number for IMR.
+**/
+ UINT8 ImrRpSelection;
+
+/** Offset 0x0545 - Enable PCH HSIO PCIE Rx Set Ctle
+ Enable PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtleEnable[24];
+
+/** Offset 0x055D - PCH HSIO PCIE Rx Set Ctle Value
+ PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtle[24];
+
+/** Offset 0x0575 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24];
+
+/** Offset 0x058D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen1DownscaleAmp[24];
+
+/** Offset 0x05A5 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24];
+
+/** Offset 0x05BD - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen2DownscaleAmp[24];
+
+/** Offset 0x05D5 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24];
+
+/** Offset 0x05ED - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value
+ PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchPcieHsioTxGen3DownscaleAmp[24];
+
+/** Offset 0x0605 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmphEnable[24];
+
+/** Offset 0x061D - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value
+ PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen1DeEmph[24];
+
+/** Offset 0x0635 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24];
+
+/** Offset 0x064D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph3p5[24];
+
+/** Offset 0x0665 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24];
+
+/** Offset 0x067D - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value
+ PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchPcieHsioTxGen2DeEmph6p0[24];
+
+/** Offset 0x0695 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMagEnable[8];
+
+/** Offset 0x069D - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen1EqBoostMag[8];
+
+/** Offset 0x06A5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMagEnable[8];
+
+/** Offset 0x06AD - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen2EqBoostMag[8];
+
+/** Offset 0x06B5 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMagEnable[8];
+
+/** Offset 0x06BD - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value.
+**/
+ UINT8 PchSataHsioRxGen3EqBoostMag[8];
+
+/** Offset 0x06C5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8];
+
+/** Offset 0x06CD - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen1DownscaleAmp[8];
+
+/** Offset 0x06D5 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8];
+
+/** Offset 0x06DD - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen2DownscaleAmp[8];
+
+/** Offset 0x06E5 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8];
+
+/** Offset 0x06ED - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value
+ PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value.
+**/
+ UINT8 PchSataHsioTxGen3DownscaleAmp[8];
+
+/** Offset 0x06F5 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen1DeEmphEnable[8];
+
+/** Offset 0x06FD - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen1DeEmph[8];
+
+/** Offset 0x0705 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen2DeEmphEnable[8];
+
+/** Offset 0x070D - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen2DeEmph[8];
+
+/** Offset 0x0715 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PchSataHsioTxGen3DeEmphEnable[8];
+
+/** Offset 0x071D - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting
+ PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting.
+**/
+ UINT8 PchSataHsioTxGen3DeEmph[8];
+
+/** Offset 0x0725 - ChipsetInit HECI message
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 ChipsetInitMessage;
+
+/** Offset 0x0726 - Bypass ChipsetInit sync reset.
+ DEPRECATED
+ $EN_DIS
+**/
+ UINT8 BypassPhySyncReset;
+
+/** Offset 0x0727 - PCH LPC Enhance the port 8xh decoding
+ Original LPC only decodes one byte of port 80h.
+ $EN_DIS
+**/
+ UINT8 PchLpcEnhancePort8xhDecoding;
+
+/** Offset 0x0728 - PCH Port80 Route
+ Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
+ $EN_DIS
+**/
+ UINT8 PchPort80Route;
+
+/** Offset 0x0729 - Disable and Lock Watch Dog Register
+ Set 1 to clear WDT status, then disable and lock WDT registers.
+ $EN_DIS
+**/
+ UINT8 WdtDisableAndLock;
+
+/** Offset 0x072A - Enable Intel HD Audio (Azalia)
+ 0: Disable, 1: Enable (Default) Azalia controller
+ $EN_DIS
+**/
+ UINT8 PchHdaEnable;
+
+/** Offset 0x072B - Enable PCH ISH Controller
+ 0: Disable, 1: Enable (Default) ISH Controller
+ $EN_DIS
+**/
+ UINT8 PchIshEnable;
+
+/** Offset 0x072C - Platform Debug Consent
+ To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type.
+ Enabling this BIOS option may alter the default value of other debug-related BIOS
+ options.\Manual: Do not use Platform Debug Consent to override other debug-relevant
+ policies, but the user must set each debug option manually, aimed at advanced users.\n
+ Note: DCI OOB (aka BSSB) uses CCA probe
+ 0:Disabled, 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled
+ (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual
+**/
+ UINT8 PlatformDebugConsent;
+
+/** Offset 0x072D - Debug Interfaces
+ Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub,
+ BIT2 - Not used.
+**/
+ UINT8 PcdDebugInterfaceFlags;
+
+/** Offset 0x072E - Serial Io Uart Debug Controller Number
+ Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT
+ Core interface, it cannot be used for debug purpose.
+ 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2
+**/
+ UINT8 SerialIoUartDebugControllerNumber;
+
+/** Offset 0x072F - Serial Io Uart Debug Auto Flow
+ Enables UART hardware flow control, CTS and RTS lines.
+ $EN_DIS
+**/
+ UINT8 SerialIoUartDebugAutoFlow;
+
+/** Offset 0x0730 - Serial Io Uart Debug BaudRate
+ Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
+ 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
+**/
+ UINT32 SerialIoUartDebugBaudRate;
+
+/** Offset 0x0734 - Serial Io Uart Debug Parity
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartDebugParity;
+
+/** Offset 0x0735 - Serial Io Uart Debug Stop Bits
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 SerialIoUartDebugStopBits;
+
+/** Offset 0x0736 - Serial Io Uart Debug Data Bits
+ Set default word length. 0: Default, 5,6,7,8
+ 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
+**/
+ UINT8 SerialIoUartDebugDataBits;
+
+/** Offset 0x0737 - ISA Serial Base selection
+ Select ISA Serial Base address. Default is 0x3F8.
+ 0:0x3F8, 1:0x2F8
+**/
+ UINT8 PcdIsaSerialUartBase;
+
+/** Offset 0x0738 - PcdSerialDebugBaudRate
+ Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
+ 3:9600, 4:19200, 6:56700, 7:115200
+**/
+ UINT8 PcdSerialDebugBaudRate;
+
+/** Offset 0x0739
+**/
+ UINT8 UnusedUpdSpace21;
+
+/** Offset 0x073A - Post Code Output Port
+ This option configures Post Code Output Port
+**/
+ UINT16 PostCodeOutputPort;
+
+/** Offset 0x073C
+**/
+ UINT8 PchPreMemRsvd[32];
+
+/** Offset 0x075C - Write Drive Strength/Equalization 2D
+ Enables/Disable Write Drive Strength/Equalization 2D
+ $EN_DIS
+**/
+ UINT8 WRDSEQT;
+
+/** Offset 0x075D
+**/
+ UINT8 UnusedUpdSpace22[4];
+
+/** Offset 0x0761
+**/
+ UINT8 ReservedFspmUpd[15];
+} FSP_M_CONFIG;
/** Fsp M UPD Configuration
**/
@@ -66,17 +3040,13 @@ typedef struct {
**/
FSP_M_CONFIG FspmConfig;
-/** Offset 0x051F
-**/
- UINT8 UnusedUpdSpace8;
-
-/** Offset 0x0520
+/** Offset 0x0770
**/
- FSP_M_TEST_CONFIG FspmTestConfig;
+ UINT8 UnusedUpdSpace23[6];
-/** Offset 0x05BC
+/** Offset 0x0776
**/
- UINT32 UpdTerminator;
+ UINT16 UpdTerminator;
} FSPM_UPD;
#pragma pack()
diff --git a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h
index 37356a142a..4aa5008356 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/icelake/FspsUpd.h
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
@@ -37,15 +37,3552 @@ are permitted provided that the following conditions are met:
#pragma pack(1)
+
+///
+/// Azalia Header structure
+///
+typedef struct {
+ UINT16 VendorId; ///< Codec Vendor ID
+ UINT16 DeviceId; ///< Codec Device ID
+ UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision.
+ UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI.
+ UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer.
+ UINT32 Reserved; ///< Reserved for future use. Must be set to 0.
+} AZALIA_HEADER;
+
+///
+/// Audio Azalia Verb Table structure
+///
+typedef struct {
+ AZALIA_HEADER Header; ///< AZALIA PCH header
+ UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header
+} AUDIO_AZALIA_VERB_TABLE;
+
+///
+/// Refer to the definition of PCH_INT_PIN
+///
+typedef enum {
+ SiPchNoInt, ///< No Interrupt Pin
+ SiPchIntA,
+ SiPchIntB,
+ SiPchIntC,
+ SiPchIntD
+} SI_PCH_INT_PIN;
+///
+/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device.
+///
+typedef struct {
+ UINT8 Device; ///< Device number
+ UINT8 Function; ///< Device function
+ UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN)
+ UINT8 Irq; ///< IRQ to be set for device.
+} SI_PCH_DEVICE_INTERRUPT_CONFIG;
+
+#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
+
+
/** Fsp S Configuration
**/
typedef struct {
-} FSP_S_CONFIG;
-/** Fsp S Test Configuration
+/** Offset 0x0020 - Si Config CSM Flag.
+ Platform specific common policies that used by several silicon components. CSM status flag.
+ $EN_DIS
**/
-typedef struct {
-} FSP_S_TEST_CONFIG;
+ UINT8 SiCsmFlag;
+
+/** Offset 0x0021
+**/
+ UINT8 UnusedUpdSpace0[3];
+
+/** Offset 0x0024 - SVID SDID table Poniter.
+ The address of the table of SVID SDID to customize each SVID SDID entry.
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x0028 - Number of ssid table.
+ SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x002A
+**/
+ UINT8 SiPostMemRsvd[16];
+
+/** Offset 0x003A
+**/
+ UINT8 UnusedUpdSpace1[2];
+
+/** Offset 0x003C - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x0040 - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0044 - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x0045 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x0046 - Deprecated Skip Multi-Processor Initialization
+ {@deprecated SkipMpInit has been moved to FspmUpd as SkipMpInitPreMem. </b>0: Initialize;
+ <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x0047 - PpinSupport to view Protected Processor Inventory Number
+ Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
+ flag is set) for PPIN Support
+ 0: Disable, 1: Enable, 2: Auto
+**/
+ UINT8 PpinSupport;
+
+/** Offset 0x0048 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 TurboMode;
+
+/** Offset 0x0049 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable;
+
+/** Offset 0x004A - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable;
+
+/** Offset 0x004B
+**/
+ UINT8 UnusedUpdSpace2;
+
+/** Offset 0x004C - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope;
+
+/** Offset 0x004E - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT16 ImonOffset;
+
+/** Offset 0x0050 - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable;
+
+/** Offset 0x0051 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable;
+
+/** Offset 0x0052 - HECI3 state
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms
+ , 8 - 8ms , 10 - 10ms.For all VR Indexe
+**/
+ UINT8 TdcTimeWindow;
+
+/** Offset 0x0053 - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock;
+
+/** Offset 0x0054 - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
+**/
+ UINT16 TdcPowerLimit;
+
+/** Offset 0x0056 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline;
+
+/** Offset 0x0058 - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline;
+
+/** Offset 0x005A - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold;
+
+/** Offset 0x005C - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold;
+
+/** Offset 0x005E - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold;
+
+/** Offset 0x0060 - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax;
+
+/** Offset 0x0062 - VR Voltage Limit
+ PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV.
+**/
+ UINT16 VrVoltageLimit;
+
+/** Offset 0x0064 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x0065 - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4,
+ Range 0-255. Value of 100 = 100/4 = 25 offset
+**/
+ UINT8 PsysOffset;
+
+/** Offset 0x0066 - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program
+ slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0:
+ Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x0067 - Pre Wake Randomization time
+ PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum pre-wake randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled.
+ Range 0-255 <b>0</b>.
+**/
+ UINT8 PreWake;
+
+/** Offset 0x0068 - Ramp Up Randomization time
+ PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum Ramp Up randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampUp;
+
+/** Offset 0x0069 - Ramp Down Randomization time
+ PCODE MMIO Mailbox: Acoustic Mitigation Range.Defines the maximum Ramp Down randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMitigation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampDown;
+
+/** Offset 0x006A - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableFivr;
+
+/** Offset 0x006B - Slew Rate configuration for Deep Package C States for VR FIVR domain
+ Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForFivr;
+
+/** Offset 0x006C - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x006D
+**/
+ UINT8 UnusedUpdSpace3;
+
+/** Offset 0x006E - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x0070 - FIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments, with range of
+ 0.2% to 10%. <b>2: 0.2%</b>; Range: 0.2% to 10.0% (2-100).
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x0071 - Enable or Disable Minimum Voltage Override
+ Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 EnableMinVoltageOverride;
+
+/** Offset 0x0072 - Min Voltage for C8
+ PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
+ 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageC8;
+
+/** Offset 0x0074 - Min Voltage for Runtime
+ PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
+ = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageRuntime;
+
+/** Offset 0x0076 - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x0077 - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x0078 - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x0079 - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x007A - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x007B
+**/
+ UINT8 UnusedUpdSpace4[5];
+
+/** Offset 0x0080 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x0088 - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x008C - Enable or Disable Voltage Optimization feature
+ Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 VoltageOptimization;
+
+/** Offset 0x008D - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x008E - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x008F - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x0090 - 1-Core Ratio Limit
+ 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
+ to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x0091 - 2-Core Ratio Limit
+ 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x0092 - 3-Core Ratio Limit
+ 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x0093 - 4-Core Ratio Limit
+ 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x0094 - 5-Core Ratio Limit
+ 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x0095 - 6-Core Ratio Limit
+ 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x0096 - 7-Core Ratio Limit
+ 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x0097 - 8-Core Ratio Limit
+ 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x0098 - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x0099 - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x009A - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
+ 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x009B - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x009C - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x009D - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x009E - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x009F - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x00A0 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x00A1 - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For SKL Y SKU, the recommended default for this policy is
+ <b>10</b>, For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x00A2 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For SKL Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x00A3 - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x00A4 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x00A8 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x00AC - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x00B0 - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
+
+/** Offset 0x00B4 - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x00B8 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x00B9 - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x00BA - Intel Turbo Boost Max Technology 3.0 Driver
+ Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x00BB - Enable or Disable Per Core P State OS control
+ Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnablePerCorePState;
+
+/** Offset 0x00BC - Enable or Disable HwP Autonomous Per Core P State OS control
+ Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
+ Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoPerCorePstate;
+
+/** Offset 0x00BD - Enable or Disable HwP Autonomous EPP Grouping
+ Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoEppGrouping;
+
+/** Offset 0x00BE - Enable or Disable EPB override over PECI
+ Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableEpbPeciOverride;
+
+/** Offset 0x00BF - Enable or Disable Fast MSR for IA32_HWP_REQUEST
+ Enable or Disable Fast MSR for IA32_HWP_REQUEST. <b>0: Disable</b>;1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableFastMsrHwpReq;
+
+/** Offset 0x00C0 - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x00C1 - Maximum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x00C2 - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x00C3 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x00C4 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x00C5 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x00C6 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x00C7 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x00C8 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x00C9 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x00CA - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x00CB - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x00CC - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x00F4 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x00F8 - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x00FC - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0100 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0104 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x0108 - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x010C - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x010D - PL1 timewindow
+ PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
+ , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x010E - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x010F
+**/
+ UINT8 UnusedUpdSpace5;
+
+/** Offset 0x0110 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0112
+**/
+ UINT8 UnusedUpdSpace6[2];
+
+/** Offset 0x0114 - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0118 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x011C - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x011D - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x011E - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x011F - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0120 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0121 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0122 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0123 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0124 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 AutoThermalReporting;
+
+/** Offset 0x0125 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x0126 - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x0127 - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x0128 - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x0129 - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x012A - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x012B - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x012C - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x012D - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x012E - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x012F - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0130 - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0131 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0132 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0133 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0134 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0135 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0136 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
+ No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x0137 - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x0138 - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x0139 - Configuration for boot TDP selection
+ Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
+ Up;0xFF : Deactivate
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x013A - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x013C - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x013E - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0140 - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0142 - Interrupt Response Time Limit of C-State LatencyContol5. 0 is Auto.
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0144 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0154 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x0158 - CpuMpPpi
+ Pointer for CpuMpPpi
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x015C - CpuMpHob
+ Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage.
+**/
+ UINT32 CpuMpHob;
+
+/** Offset 0x0160
+**/
+ UINT8 CpuPostMemRsvd[16];
+
+/** Offset 0x0170 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0190 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x0194
+**/
+ UINT8 UnusedUpdSpace7[4];
+
+/** Offset 0x0198 - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x01A0 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x01A8 - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x01A9 - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x01AA
+**/
+ UINT8 UnusedUpdSpace8[6];
+
+/** Offset 0x01B0 - SgxEpoch0
+ SgxEpoch0 default values
+**/
+ UINT64 SgxEpoch0;
+
+/** Offset 0x01B8 - SgxEpoch1
+ SgxEpoch1 default values
+**/
+ UINT64 SgxEpoch1;
+
+/** Offset 0x01C0 - SgxSinitNvsData
+ SgxSinitNvsData default values
+**/
+ UINT8 SgxSinitNvsData;
+
+/** Offset 0x01C1 - SgxSinitDataFromTpm
+ SgxSinitDataFromTpm default values
+**/
+ UINT8 SgxSinitDataFromTpm;
+
+/** Offset 0x01C2
+**/
+ UINT8 SecurityPostMemRsvd[16];
+
+/** Offset 0x01D2 - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x01D3 - DEPRECATED SA CRID
+ Deprecated, use FSPM_UPD.FspmConfig.CridEnable instead
+ $EN_DIS
+**/
+ UINT8 CridEnableDeprecated;
+
+/** Offset 0x01D4 - Skip PAM register lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x01D5 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x01D6 - DMI ASPM
+ 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1
+ 0:Disable, 1:L0s, 2:L1, 3:L0sL1
+**/
+ UINT8 DmiAspm;
+
+/** Offset 0x01D7 - PchDmiCwbEnable
+ Central Write Buffer feature configurable and disabled by default
+ $EN_DIS
+**/
+ UINT8 PchDmiCwbEnable;
+
+/** Offset 0x01D8 - DMI Extended Sync Control
+ Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended
+ Sync Control
+ $EN_DIS
+**/
+ UINT8 DmiExtSync;
+
+/** Offset 0x01D9 - DMI IOT Control
+ Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control
+ $EN_DIS
+**/
+ UINT8 DmiIot;
+
+/** Offset 0x01DA - PCIe DeEmphasis control per root port
+ 0: -6dB, 1(Default): -3.5dB
+ 0:-6dB, 1:-3.5dB
+**/
+ UINT8 PegDeEmphasis[4];
+
+/** Offset 0x01DE - PCIe Slot Power Limit value per root port
+ Slot power limit value per root port
+**/
+ UINT8 PegSlotPowerLimitValue[4];
+
+/** Offset 0x01E2 - PCIe Slot Power Limit scale per root port
+ Slot power limit scale per root port
+ 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x
+**/
+ UINT8 PegSlotPowerLimitScale[4];
+
+/** Offset 0x01E6 - PCIe Physical Slot Number per root port
+ Physical Slot Number per root port
+**/
+ UINT16 PegPhysicalSlotNumber[4];
+
+/** Offset 0x01EE - PEG Max Payload size per root port
+ 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B
+ 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B
+**/
+ UINT8 PegMaxPayload[4];
+
+/** Offset 0x01F2
+**/
+ UINT8 UnusedUpdSpace9[2];
+
+/** Offset 0x01F4 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x01F8 - Logo Pointer
+ Points to PEI Display Logo Image
+**/
+ UINT32 LogoPtr;
+
+/** Offset 0x01FC - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0200 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x0204 - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x0208 - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
+**/
+ UINT8 PavpEnable;
+
+/** Offset 0x0209 - CdClock Frequency selection
+ 0: (Default) Auto (Max based on reference clock frequency), 1: 307.2, 2: 312 Mhz,
+ 3: 552 Mhz, 4: 556.8 Mhz, 5: 648 Mhz, 6: 652.8 Mhz
+ 0: Auto (Max based on reference clock frequency), 1: 307.2, 2: 312 Mhz, 3: 552 Mhz,
+ 4: 556.8 Mhz, 5: 648 Mhz, 6: 652.8 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x020A - Enable/Disable PeiGraphicsPeimInit
+ Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x020B - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x020C - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x020D - Enable/Disable CdynmaxClamp
+ Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x020E - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x020F - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x0210 - Enable/Disable CdClock Init
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock if not initialized by Gfx PEIM
+ $EN_DIS
+**/
+ UINT8 SkipCdClockInit;
+
+/** Offset 0x0211 - Enable or disable HPD of DDI port-A device
+ 0=Disabled,1(Default)=eDP, 2=MIPI DSI
+ 0:Disabled, 1:eDP, 2:MIPI DSI
+**/
+ UINT8 DdiPortAConfig;
+
+/** Offset 0x0212 - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x0213 - Enable or disable HPD of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x0214 - Enable or disable HPD of DDI port 1
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort1Hpd;
+
+/** Offset 0x0215 - Enable or disable HPD of DDI port 2
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort2Hpd;
+
+/** Offset 0x0216 - Enable or disable HPD of DDI port 3
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort3Hpd;
+
+/** Offset 0x0217 - Enable or disable HPD of DDI port 4
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPort4Hpd;
+
+/** Offset 0x0218 - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x0219 - Enable or disable DDC of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x021A - Enable DDC setting of DDI Port 1
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort1Ddc;
+
+/** Offset 0x021B - Enable DDC setting of DDI Port 2
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort2Ddc;
+
+/** Offset 0x021C - Enable DDC setting of DDI Port 3
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort3Ddc;
+
+/** Offset 0x021D - Enable DDC setting of DDI Port 4
+ 0=Disable, 1=DDC(Default)
+ 0: Disable, 1: DDC
+**/
+ UINT8 DdiPort4Ddc;
+
+/** Offset 0x021E - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x021F - USB override in IOM
+ This policy will enable/disable USB Connect override in IOM
+ $EN_DIS
+**/
+ UINT8 UsbOverride;
+
+/** Offset 0x0220 - VCCST request for IOM
+ This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5
+ $EN_DIS
+**/
+ UINT8 VccSt;
+
+/** Offset 0x0221 - Enable D3 Hot in TCSS
+ This policy will enable/disable D3 hot support in IOM
+ $EN_DIS
+**/
+ UINT8 D3HotEnable;
+
+/** Offset 0x0222 - Enable D3 Cold in TCSS
+ This policy will enable/disable D3 cold support in IOM
+ $EN_DIS
+**/
+ UINT8 D3ColdEnable;
+
+/** Offset 0x0223 - Enable/Disable PMC-PD Solution
+ This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution
+ $EN_DIS
+**/
+ UINT8 PmcPdEnable;
+
+/** Offset 0x0224 - Enable/Disable PTM
+ This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports
+ $EN_DIS
+**/
+ UINT8 PtmEnabled[4];
+
+/** Offset 0x0228 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 SaPcieItbtRpLtrEnable[4];
+
+/** Offset 0x022C - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0230 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0234 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x023C - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0240 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0244 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x024C - Force LTR Override
+ Force LTR Override.
+**/
+ UINT8 SaPcieItbtRpForceLtrOverride[4];
+
+/** Offset 0x0250 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 SaPcieItbtRpLtrConfigLock[4];
+
+/** Offset 0x0254 - Enable VMD controller
+ Enable/disable to VMD controller.
+ $EN_DIS
+**/
+ UINT8 VmdEnable;
+
+/** Offset 0x0255 - Enable VMD portA Support
+ Enable/disable to VMD portA Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortA;
+
+/** Offset 0x0256 - Enable VMD portB Support
+ Enable/disable to VMD portB Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortB;
+
+/** Offset 0x0257 - Enable VMD portC Support
+ Enable/disable to VMD portC Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortC;
+
+/** Offset 0x0258 - Enable VMD portD Support
+ Enable/disable to VMD portD Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortD;
+
+/** Offset 0x0259 - VMD Config Bar size
+ Set The VMD Config Bar Size.
+**/
+ UINT8 VmdCfgBarSz;
+
+/** Offset 0x025A - VMD Config Bar Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default)
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdCfgBarAttr;
+
+/** Offset 0x025B - VMD Mem Bar1 size
+ Set The VMD Mem Bar1 Size.
+**/
+ UINT8 VmdMemBarSz1;
+
+/** Offset 0x025C - VMD Mem Bar1 Attributes
+ 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar1Attr;
+
+/** Offset 0x025D - VMD Mem Bar2 size
+ Set The VMD Mem Bar2 Size.
+**/
+ UINT8 VmdMemBarSz2;
+
+/** Offset 0x025E - VMD Mem Bar2 Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar2Attr;
+
+/** Offset 0x025F
+**/
+ UINT8 UnusedUpdSpace10[1];
+
+/** Offset 0x0260 - TypeC port GPIO setting
+ GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined
+ in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Icl
+ = IceLake)
+**/
+ UINT32 IomTypeCPortPadCfg[8];
+
+/** Offset 0x0280 - TCSS Aux Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssAuxOri;
+
+/** Offset 0x0282 - TCSS HSL Orientation Override Enable
+ Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
+**/
+ UINT16 TcssHslOri;
+
+/** Offset 0x0284 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x0285 - CPU USB3 Port Over Current Pin
+ Describe the specific over current pin number of USBC Port N.
+**/
+ UINT8 CpuUsb3OverCurrentPin[8];
+
+/** Offset 0x028D - TCSS USB Port Enable
+ Bits 0, 1, ... max Type C port control enables
+**/
+ UINT8 UsbTcPortEn;
+
+/** Offset 0x028E
+**/
+ UINT8 UnusedUpdSpace11[2];
+
+/** Offset 0x0290 - ITBT DMA UUID
+ TCSS DMA1, DMA2 UUID Number
+**/
+ UINT32 IclAxITbtDmaUuid[2];
+
+/** Offset 0x0298 - ITBT Root Port Enable
+ ITBT Root Port Enable, 0:Disable, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 ITbtPcieRootPortEn[4];
+
+/** Offset 0x029C - ITBTForcePowerOn Timeout value
+ ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000.
+ 100 = 100 ms.
+**/
+ UINT16 ITbtForcePowerOnTimeoutInMs;
+
+/** Offset 0x029E - ITbtConnectTopology Timeout value
+ ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range
+ is 0-10000. 100 = 100 ms.
+**/
+ UINT16 ITbtConnectTopologyTimeoutInMs;
+
+/** Offset 0x02A0 - TcssXhciEnableComplianceMode
+ Set Compliance Mode. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssXhciEnableComplianceMode;
+
+/** Offset 0x02A1 - Enable/Disable PEG GEN3 Static EQ Phase1 programming
+ Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 SaPcieGen3ProgramStaticEq;
+
+/** Offset 0x02A2 - Enable/Disable GEN4 Static EQ Phase1 programming
+ Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 SaPcieGen4ProgramStaticEq;
+
+/** Offset 0x02A3 - TcssLoopbackModeBitMap
+ Set Loopback Mode Bit Map. 0:Disabled 1:Enabled
+ $EN_DIS
+**/
+ UINT8 TcssLoopbackModeBitMap;
+
+/** Offset 0x02A4 - ITBT DMA UUID
+ TCSS DMA1, DMA2 LTR value
+**/
+ UINT16 ITbtDmaLtr[2];
+
+/** Offset 0x02A8
+**/
+ UINT8 SaPostMemRsvd[3];
+
+/** Offset 0x02AB - HECI3 state
+ The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
+ 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 Heci3Enabled;
+
+/** Offset 0x02AC - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x02AD - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x02AE - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
+
+/** Offset 0x02AF - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x02B0
+**/
+ UINT8 MePostMemRsvd[10];
+
+/** Offset 0x02BA - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x02BB - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer.
+ $EN_DIS
+**/
+ UINT8 WatchDog;
+
+/** Offset 0x02BC - ASF Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality.
+ $EN_DIS
+**/
+ UINT8 AsfEnabled;
+
+/** Offset 0x02BD - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x02BE - OS Timer
+ 16 bits Value, Set OS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x02C0 - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x02C2 - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x02C3 - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x02C4 - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x02C5 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x02C6 - MEBX execution
+ Enable/Disable. 0: Disable, 1: enable, Force MEBX execution
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x02C7
+**/
+ UINT8 AmtPostMemRsvd[10];
+
+/** Offset 0x02D1 - SPI0 Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow,
+ 1:PchSerialIoCsActiveHigh
+**/
+ UINT8 SerialIoSpi0CsPolarity[2];
+
+/** Offset 0x02D3 - SPI1 Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow,
+ 1:PchSerialIoCsActiveHigh
+**/
+ UINT8 SerialIoSpi1CsPolarity[2];
+
+/** Offset 0x02D5 - SPI2 Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:PchSerialIoCsActiveLow,
+ 1:PchSerialIoCsActiveHigh
+**/
+ UINT8 SerialIoSpi2CsPolarity[2];
+
+/** Offset 0x02D7 - SPI0 Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
+**/
+ UINT8 SerialIoSpi0CsEnable[2];
+
+/** Offset 0x02D9 - SPI1 Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
+**/
+ UINT8 SerialIoSpi1CsEnable[2];
+
+/** Offset 0x02DB - SPI2 Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
+**/
+ UINT8 SerialIoSpi2CsEnable[2];
+
+/** Offset 0x02DD - SPIn Device Mode
+ Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available
+ modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden
+**/
+ UINT8 SerialIoSpiMode[3];
+
+/** Offset 0x02E0 - SPIn Default Chip Select Output
+ Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
+ options: 0:CS0, 1:CS1
+**/
+ UINT8 SerialIoSpiDefaultCsOutput[3];
+
+/** Offset 0x02E3 - SPIn Default Chip Select Mode HW/SW
+ Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
+ SPI1, ... Available options: 0:HW, 1:SW
+**/
+ UINT8 SerialIoSpiCsMode[3];
+
+/** Offset 0x02E6 - SPIn Default Chip Select State Low/High
+ Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ...
+ Available options: 0:Low, 1:High
+**/
+ UINT8 SerialIoSpiCsState[3];
+
+/** Offset 0x02E9 - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5
+ pads termination respectively. One byte for each controller, byte0 for I2C0, byte1
+ for I2C1, and so on.
+**/
+ UINT8 PchSerialIoI2cPadsTermination[6];
+
+/** Offset 0x02EF - I2Cn Device Mode
+ Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
+ modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden
+**/
+ UINT8 SerialIoI2cMode[6];
+
+/** Offset 0x02F5 - UARTn Device Mode
+ Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available
+ modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom,
+ 4:SerialIoUartSkipInit
+**/
+ UINT8 SerialIoUartMode[3];
+
+/** Offset 0x02F8 - Default BaudRate for each Serial IO UART
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 SerialIoUartBaudRate[3];
+
+/** Offset 0x0304 - Default ParityType for each Serial IO UART
+ Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartParity[3];
+
+/** Offset 0x0307 - Default DataBits for each Serial IO UART
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 SerialIoUartDataBits[3];
+
+/** Offset 0x030A - Default StopBits for each Serial IO UART
+ Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
+ TwoStopBits
+**/
+ UINT8 SerialIoUartStopBits[3];
+
+/** Offset 0x030D - Power Gating mode for each Serial IO UART that works in COM mode
+ Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
+**/
+ UINT8 SerialIoUartPowerGating[3];
+
+/** Offset 0x0310 - Enable Dma for each Serial IO UART that supports it
+ Set DMA/PIO mode. 0: Disabled, 1: Enabled
+**/
+ UINT8 SerialIoUartDmaEnable[3];
+
+/** Offset 0x0313 - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS lines.
+**/
+ UINT8 SerialIoUartAutoFlow[3];
+
+/** Offset 0x0316
+**/
+ UINT8 UnusedUpdSpace12[2];
+
+/** Offset 0x0318 - SerialIoUartRxPinMux
+ Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for
+ possible values.
+**/
+ UINT32 SerialIoUartRxPinMux[3];
+
+/** Offset 0x0324 - SerialIoUartTxPinMux
+ Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for
+ possible values.
+**/
+ UINT32 SerialIoUartTxPinMux[3];
+
+/** Offset 0x0330 - SerialIoUartRtsPinMux
+ Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartRtsPinMux[3];
+
+/** Offset 0x033C - SerialIoUartCtsPinMux
+ Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartCtsPinMux[3];
+
+/** Offset 0x0348 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected
+ as CNVi BT Core interface, it cannot be used for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x0349 - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x034A - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x034B - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x034C - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x034D - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x034E - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x034F - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
+**/
+ UINT8 PchHdaIDispLinkFrequency;
+
+/** Offset 0x0350 - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T
+ 0: 2T, 2: 4T, 3: 8T, 4: 16T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x0351 - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
+
+/** Offset 0x0352 - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x0353 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
+
+/** Offset 0x0354 - HD Audio Reset Wait Timer
+ The delay timer after Azalia reset, the value is number of microseconds. Default is 600.
+**/
+ UINT16 PchHdaResetWaitTimer;
+
+/** Offset 0x0356 - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x0357
+**/
+ UINT8 UnusedUpdSpace13;
+
+/** Offset 0x0358 - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x035C - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHda;
+
+/** Offset 0x035D - Enable HD Audio DMIC0 Link
+ Enable/disable HD Audio DMIC0 link. Muxed with SNDW4.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic0;
+
+/** Offset 0x035E - Enable HD Audio DMIC1 Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic1;
+
+/** Offset 0x035F - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP0/I2S link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp0;
+
+/** Offset 0x0360 - Enable HD Audio SSP1 Link
+ Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp1;
+
+/** Offset 0x0361 - Enable HD Audio SSP2 Link
+ Enable/disable HD Audio SSP2/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp2;
+
+/** Offset 0x0362 - Enable HD Audio SSP3 Link
+ Enable/disable HD Audio SSP3/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp3;
+
+/** Offset 0x0363 - Enable HD Audio SSP4 Link
+ Enable/disable HD Audio SSP4/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp4;
+
+/** Offset 0x0364 - Enable HD Audio SSP5 Link
+ Enable/disable HD Audio SSP5/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp5;
+
+/** Offset 0x0365 - Enable HD Audio SoundWire#1 Link
+ Enable/disable HD Audio SNDW1 link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw1;
+
+/** Offset 0x0366 - Enable HD Audio SoundWire#2 Link
+ Enable/disable HD Audio SNDW2 link. Muxed with SSP1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw2;
+
+/** Offset 0x0367 - Enable HD Audio SoundWire#3 Link
+ Enable/disable HD Audio SNDW3 link. Muxed with DMIC1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw3;
+
+/** Offset 0x0368 - Enable HD Audio SoundWire#4 Link
+ Enable/disable HD Audio SNDW4 link. Muxed with DMIC0.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw4;
+
+/** Offset 0x0369 - CNVi Configuration
+ This option allows for automatic detection of Connectivity Solution. [Auto Detection]
+ assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
+ 0:Disable, 1:Auto
+**/
+ UINT8 CnviMode;
+
+/** Offset 0x036A - CNVi BT Core
+ Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtCore;
+
+/** Offset 0x036B - CNVi BT Audio Offload
+ Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE
+ $EN_DIS
+**/
+ UINT8 CnviBtAudioOffload;
+
+/** Offset 0x036C - CNVi RF_RESET pin muxing
+ Select CNVi RF_RESET# pin depending on board routing. ICP-LP: GPP_A8 = 0x2640E408(default)
+ or GPP_F4 = 0x1645E404. ICP-H: 0. ICP-N: GPP_H12 = 0x2746E40C(default) or GPP_H1
+ = 0x3746E401. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h.
+**/
+ UINT32 CnviRfResetPinMux;
+
+/** Offset 0x0370 - CNVi CLKREQ pin muxing
+ Select CNVi CLKREQ pin depending on board routing. ICP-LP: GPP_A9 = 0x2640E609(default)
+ or GPP_F5 = 0x2645E605. ICP-H: 0. ICP-N: GPP_H13 = 0x2746E60D(default) or GPP_H2
+ = 0x3746E602. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in GpioPins*.h.
+**/
+ UINT32 CnviClkreqPinMux;
+
+/** Offset 0x0374 - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x0375 - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x0376 - Enable Host C10 reporting through eSPI
+ Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire.
+ $EN_DIS
+**/
+ UINT8 PchEspiHostC10ReportEnable;
+
+/** Offset 0x0377 - Enable SdCard Controller
+ Enable/disable SD Card Controller.
+ $EN_DIS
+**/
+ UINT8 ScsSdCardEnabled;
+
+/** Offset 0x0378 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
+**/
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0379 - Use tuned DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 SdCardUseCustomDlls;
+
+/** Offset 0x037A
+**/
+ UINT8 UnusedUpdSpace14[2];
+
+/** Offset 0x037C - SdCard Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 SdCardTxCmdDelayRegValue;
+
+/** Offset 0x0380 - SdCard Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardTxDataDelay1RegValue;
+
+/** Offset 0x0384 - SdCard Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardTxDataDelay2RegValue;
+
+/** Offset 0x0388 - SdCard Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay1RegValue;
+
+/** Offset 0x038C - SdCard Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 SdCardRxCmdDataDelay2RegValue;
+
+/** Offset 0x0390 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0391 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0392 - Use DLL values from policy
+ Set if FSP should use HS400 DLL values from policy
+ $EN_DIS
+**/
+ UINT8 EmmcUseCustomDlls;
+
+/** Offset 0x0393
+**/
+ UINT8 UnusedUpdSpace15;
+
+/** Offset 0x0394 - Emmc Tx CMD Delay control register value
+ Please see Tx CMD Delay Control register definition for help
+**/
+ UINT32 EmmcTxCmdDelayRegValue;
+
+/** Offset 0x0398 - Emmc Tx DATA Delay control 1 register value
+ Please see Tx DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcTxDataDelay1RegValue;
+
+/** Offset 0x039C - Emmc Tx DATA Delay control 2 register value
+ Please see Tx DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcTxDataDelay2RegValue;
+
+/** Offset 0x03A0 - Emmc Rx CMD + DATA Delay control 1 register value
+ Please see Rx CMD + DATA Delay control 1 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay1RegValue;
+
+/** Offset 0x03A4 - Emmc Rx CMD + DATA Delay control 2 register value
+ Please see Rx CMD + DATA Delay control 2 register definition for help
+**/
+ UINT32 EmmcRxCmdDataDelay2RegValue;
+
+/** Offset 0x03A8 - Emmc Rx Strobe Delay control register value
+ Please see Rx Strobe Delay control register definition for help
+**/
+ UINT32 EmmcRxStrobeDelayRegValue;
+
+/** Offset 0x03AC - UFS enable/disable
+ Please see Rx Strobe Delay control register definition for help
+ $EN_DIS
+**/
+ UINT8 UfsEnable[2];
+
+/** Offset 0x03AE - Enable PCH ISH SPI GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshSpiGpioAssign;
+
+/** Offset 0x03AF - Enable PCH ISH UART0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart0GpioAssign;
+
+/** Offset 0x03B0 - Enable PCH ISH UART1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart1GpioAssign;
+
+/** Offset 0x03B1 - Enable PCH ISH I2C0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c0GpioAssign;
+
+/** Offset 0x03B2 - Enable PCH ISH I2C1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c1GpioAssign;
+
+/** Offset 0x03B3 - Enable PCH ISH I2C2 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c2GpioAssign;
+
+/** Offset 0x03B4 - Enable PCH ISH GP_0 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp0GpioAssign;
+
+/** Offset 0x03B5 - Enable PCH ISH GP_1 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp1GpioAssign;
+
+/** Offset 0x03B6 - Enable PCH ISH GP_2 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp2GpioAssign;
+
+/** Offset 0x03B7 - Enable PCH ISH GP_3 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp3GpioAssign;
+
+/** Offset 0x03B8 - Enable PCH ISH GP_4 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp4GpioAssign;
+
+/** Offset 0x03B9 - Enable PCH ISH GP_5 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp5GpioAssign;
+
+/** Offset 0x03BA - Enable PCH ISH GP_6 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp6GpioAssign;
+
+/** Offset 0x03BB - Enable PCH ISH GP_7 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp7GpioAssign;
+
+/** Offset 0x03BC - PCH ISH PDT Unlock Msg
+ 0: False; 1: True.
+ $EN_DIS
+**/
+ UINT8 PchIshPdtUnlock;
+
+/** Offset 0x03BD - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x03BE - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x03BF - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x03C0 - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x03C1 - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x03C2 - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x03C3 - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x03C4 - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x03C5 - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x03CD - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x03D5 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x03DD - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x03E5 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x03ED - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x03F5 - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x03FD - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x0405 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x040D
+**/
+ UINT8 UnusedUpdSpace16[1];
+
+/** Offset 0x040E - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x041E - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x0426 - PCH Sata Rst Raid Alternate Id
+ Enable RAID Alternate ID.
+ $EN_DIS
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x0427 - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x0428 - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x0429 - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x042A - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x042B - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x042C - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x042D - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x042E - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x042F - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x0430 - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x0431 - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
+**/
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x0432 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x0433 - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
+**/
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x0434 - PCH SATA use RST Legacy OROM
+ Use PCH SATA RST Legacy OROM when CSM is Enabled
+ $EN_DIS
+**/
+ UINT8 SataRstLegacyOrom;
+
+/** Offset 0x0435 - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x0436 - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x0439 - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x043C - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x043F - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x0440 - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x0441 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x0442 - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x0443 - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x0444 - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x0445 - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x0446 - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x0447 - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x0448 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x0449 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x044A - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x044B - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x044C - Enable xHCI Compliance Mode
+ Compliance Mode can be enabled for testing through this option but this is disabled
+ by default.
+ $EN_DIS
+**/
+ UINT8 PchEnableComplianceMode;
+
+/** Offset 0x044D - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x044E - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x044F - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x0450 - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x0460 - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x0470 - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x047A - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x0484 - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x0485 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2PhyPetxiset[16];
+
+/** Offset 0x0495 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2PhyTxiset[16];
+
+/** Offset 0x04A5 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2PhyPredeemp[16];
+
+/** Offset 0x04B5 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2PhyPehalfbit[16];
+
+/** Offset 0x04C5 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x04CF - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x04D9 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x04E3 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x04ED
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10];
+
+/** Offset 0x04F7
+**/
+ UINT8 PchUsb3HsioFilterSelNEnable[10];
+
+/** Offset 0x0501
+**/
+ UINT8 PchUsb3HsioFilterSelPEnable[10];
+
+/** Offset 0x050B
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10];
+
+/** Offset 0x0515
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10];
+
+/** Offset 0x051F
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10];
+
+/** Offset 0x0529
+**/
+ UINT8 PchUsb3HsioFilterSelN[10];
+
+/** Offset 0x0533
+**/
+ UINT8 PchUsb3HsioFilterSelP[10];
+
+/** Offset 0x053D - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 PcieRpHotPlug[24];
+
+/** Offset 0x0555 - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[24];
+
+/** Offset 0x056D - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 PcieRpTransmitterHalfSwing[24];
+
+/** Offset 0x0585 - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[24];
+
+/** Offset 0x059D - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[24];
+
+/** Offset 0x05B5 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[24];
+
+/** Offset 0x05CD - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x05E5 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x05FD - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x0615 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x062D - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x0645 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
+
+/** Offset 0x065D - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[24];
+
+/** Offset 0x0675
+**/
+ UINT8 UnusedUpdSpace17[3];
+
+/** Offset 0x0678 - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcMask;
+
+/** Offset 0x067C - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcExtensionsMask;
+
+/** Offset 0x0680 - PTM for PCIE RP Mask
+ Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpPtmMask;
+
+/** Offset 0x0684 - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCH_PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x069C - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 PcieRpGen3EqPh3Method[24];
+
+/** Offset 0x06B4 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x06CC - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x06E4 - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
+
+/** Offset 0x06FC - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[24];
+
+/** Offset 0x0714 - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[24];
+
+/** Offset 0x072C - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[24];
+
+/** Offset 0x0744 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x075C - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x0774 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x078C - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x07BC - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[24];
+
+/** Offset 0x07EC - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[24];
+
+/** Offset 0x081C - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0834 - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x084C - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x087C - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0894 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x08AC - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x08DC - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x08F4 - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x0924 - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 5.
+**/
+ UINT8 PcieRpUptp[24];
+
+/** Offset 0x093C - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 PcieRpDptp[24];
+
+/** Offset 0x0954 - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[16];
+
+/** Offset 0x0964 - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[16];
+
+/** Offset 0x0974 - PCIE Eq Ph3 Lane Param Cm
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieEqPh3LaneParamCm[24];
+
+/** Offset 0x098C - PCIE Eq Ph3 Lane Param Cp
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieEqPh3LaneParamCp[24];
+
+/** Offset 0x09A4 - PCIE Sw Eq CoeffList Cm
+ PCH_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieSwEqCoeffListCm[5];
+
+/** Offset 0x09A9 - PCIE Sw Eq CoeffList Cp
+ PCH_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieSwEqCoeffListCp[5];
+
+/** Offset 0x09AE - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x09AF - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x09B0 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x09B1 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x09B2 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x09B3 - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x09B4 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x09B8 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x09C0 - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x09C1 - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x09C2 - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x09C3 - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x09C4 - Enable LOCKDOWN SMI
+ Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
+ $EN_DIS
+**/
+ UINT8 PchLockDownGlobalSmi;
+
+/** Offset 0x09C5 - Enable LOCKDOWN BIOS Interface
+ Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosInterface;
+
+/** Offset 0x09C6 - Enable LOCKDOWN BIOS LOCK
+ Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
+ protection.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosLock;
+
+/** Offset 0x09C7 - RTC CMOS MEMORY LOCK
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 PchLockDownRtcMemoryLock;
+
+/** Offset 0x09C8 - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x09C9 - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x09CA - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x09CB - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x09D0 - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x09D5
+**/
+ UINT8 UnusedUpdSpace18[1];
+
+/** Offset 0x09D6 - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x09E0 - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x09EA - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x09EB - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x09EC - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x09ED - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x09EE - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x09EF - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x09F0 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x09F1 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x09F2 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x09F3 - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x09F4 - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x09F5 - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x09F6 - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x09F7 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x09F8 - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x09F9 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x09FA - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x09FB - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x09FC - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x09FD - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x09FE - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x09FF - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0A00 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0A01
+**/
+ UINT8 UnusedUpdSpace19[3];
+
+/** Offset 0x0A04 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounceTime;
+
+/** Offset 0x0A08 - Disable Power Button debounce in PMC module
+ Disable Power Button debounce for PWRBTN in PMC module. '0': The 16ms debounce period
+ applies to all usages of the PWRBTN# pin (legacy behavior). '1': When a falling
+ edge occurs on the PWRBTN# pin, an interrupt is generated and the 16ms debounce
+ timer starts. Subsequent interrupts are masked while the debounce timer is running.
+**/
+ UINT8 PmcDisablePowerButtonDebounce;
+
+/** Offset 0x0A09 - PCH Pm Slp S0 Enable
+ Indicates whether SLP_S0# is to be asserted when PCH reaches idle state.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Enable;
+
+/** Offset 0x0A0A - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0A0B - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x0A0C - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x0A0D - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x0A0E - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x0A0F - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x0A10 - S0i3 support
+ S0i3 platform support. When enabled ASL code is used to determine if platform can
+ go to S0i2 or S0i3 state. 0:Disable(S0i2 only), 1:Enable (Runtime in ASL)
+ $EN_DIS
+**/
+ UINT8 PchPmS0i3Support;
+
+/** Offset 0x0A11 - SLP_S0# Override
+ DEPRECATED
+ 0:Disabled, 1:Enabled
+**/
+ UINT8 SlpS0Override;
+
+/** Offset 0x0A12 - S0ix Override Settings
+ DEPRECATED
+ 0:No Change, 1:DCI OOB, 2:USB2 DbC
+**/
+ UINT8 SlpS0DisQForDebug;
+
+/** Offset 0x0A13 - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x0A14 - Pointer of ChipsetInit format v2 Binary
+ ChipsetInit Binary format v2 Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0A18 - Length of ChipsetInit format v2 Binary
+ ChipsetInit Binary format v2 Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0A1C - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x0A1D - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x0A1E - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x0A1F - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PmcUsb2PhySusPgEnable;
+
+/** Offset 0x0A20 - OS IDLE Mode Enable
+ Enable/Disable OS Idle Mode (PCH-N and PCH-H only)
+ $EN_DIS
+**/
+ UINT8 PmcOsIdleEnable;
+
+/** Offset 0x0A21 - Enable PMC CrashLog
+ Enable or Disable PMC CrashLog; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmcCrashLogEnable;
+
+/** Offset 0x0A22 - Enable CPPM Forced Alignment
+ Enable or Disable CPPM Forced Alignment; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 ForcedAlignmentEnable;
+
+/** Offset 0x0A23 - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x0A24 - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x0A26 - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x0A28 - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x0A2A - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x0A2B - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x0A2C - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x0A2D - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x0A2E - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x0A2F - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x0A30 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x0A31 - Thermal Sensor 0 Target Width
+ Thermal Sensor 0 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x0A32 - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x0A33 - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x0A34 - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x0A35 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x0A36 - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x0A38 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x0A3A - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x0A3C - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x0A3E - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
+ Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtV1p05RailEnabledStates;
+
+/** Offset 0x0A3F
+**/
+ UINT8 UnusedUpdSpace20;
+
+/** Offset 0x0A40 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtV1p05RailVoltage;
+
+/** Offset 0x0A42 - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtV1p05RailIccMax;
+
+/** Offset 0x0A43 - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
+ Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailEnabledStates;
+
+/** Offset 0x0A44 - External Vnn Voltage Value that will be used in S0ix/Sx states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailVoltage;
+
+/** Offset 0x0A46 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailIccMax;
+
+/** Offset 0x0A47 - Mask to enable the usage of external Vnn VR rail in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in
+ Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailSxEnabledStates;
+
+/** Offset 0x0A48 - External Vnn Voltage Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
+ (0=0mV, 1=2.5mV, 2=5mV...)
+**/
+ UINT16 PchFivrExtVnnRailSxVoltage;
+
+/** Offset 0x0A4A - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailSxIccMax;
+
+/** Offset 0x0A4B - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to low current mode voltage,for PCH-LP ICL U/Y board with D0 stepping need to program
+ it to 12us
+**/
+ UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime;
+
+/** Offset 0x0A4C - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime;
+
+/** Offset 0x0A4D - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
+**/
+ UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime;
+
+/** Offset 0x0A4E - Transition time in microseconds from Off (0V) to High Current Mode Voltage
+ This field has 1us resolution. When value is 0 Transition to 0V is disabled,for
+ PCH-LP ICL U/Y board with D0 stepping need to program it to 120us
+**/
+ UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
+
+/** Offset 0x0A50 - FIVR Dynamic Power Management
+ Enable/Disable FIVR Dynamic Power Management.
+ $EN_DIS
+**/
+ UINT8 PchFivrDynPm;
+
+/** Offset 0x0A51 - Serial IO UART DBG2 table
+ Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
+ 1: Enable.
+**/
+ UINT8 SerialIoUartDbg2[3];
+
+/** Offset 0x0A54 - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x0A58 - ITSS IRQ Polarity.
+ Configuration for ITSS IPC[0-3] registers.
+**/
+ UINT32 ItssIrqPolarity[4];
+
+/** Offset 0x0A68 - PCH PMC Energy Report Debug mode
+ Disable/Enable Energy Reporting Debug Mode.
+ $EN_DIS
+**/
+ UINT8 PchPmEnergyReportDebugMode;
+
+/** Offset 0x0A69
+**/
+ UINT8 UnusedUpdSpace21[4];
+
+/** Offset 0x0A6D
+**/
+ UINT8 ReservedFspsUpd[11];
+} FSP_S_CONFIG;
/** Fsp S UPD Configuration
**/
@@ -59,11 +3596,11 @@ typedef struct {
**/
FSP_S_CONFIG FspsConfig;
-/** Offset 0x07AD
+/** Offset 0x0A78
**/
- FSP_S_TEST_CONFIG FspsTestConfig;
+ UINT8 UnusedUpdSpace22[6];
-/** Offset 0x0A80
+/** Offset 0x0A7E
**/
UINT16 UpdTerminator;
} FSPS_UPD;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 11:25:18 +0000