summaryrefslogtreecommitdiff
path: root/src/vendorcode/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/vendorcode/intel')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h1510
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h2475
2 files changed, 3808 insertions, 177 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
index ade6b03b3b..8f40c14067 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
@@ -66,9 +66,15 @@ typedef struct {
**/
UINT16 MemorySpdDataLen;
-/** Offset 0x004A - Reserved
+/** Offset 0x004A - Enable above 4GB MMIO resource support
+ Enable/disable above 4GB MMIO resource support
+ $EN_DIS
+**/
+ UINT8 EnableAbove4GBMmio;
+
+/** Offset 0x004B - Reserved
**/
- UINT8 Reserved0[2];
+ UINT8 Reserved0;
/** Offset 0x004C - MemorySpdPtr00
**/
@@ -214,9 +220,35 @@ typedef struct {
**/
UINT8 DqPinsInterleaved;
-/** Offset 0x0129 - Reserved
+/** Offset 0x0129 - Smram Mask
+ The SMM Regions AB-SEG and/or H-SEG reserved
+ 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both
+**/
+ UINT8 SmramMask;
+
+/** Offset 0x012A - MRC Fast Boot
+ Enables/Disable the MRC fast path thru the MRC
+ $EN_DIS
+**/
+ UINT8 MrcFastBoot;
+
+/** Offset 0x012B - Rank Margin Tool per Task
+ This option enables the user to execute Rank Margin Tool per major training step
+ in the MRC.
+ $EN_DIS
+**/
+ UINT8 RmtPerTask;
+
+/** Offset 0x012C - Training Trace
+ This option enables the trained state tracing feature in MRC. This feature will
+ print out the key training parameters state across major training steps.
+ $EN_DIS
+**/
+ UINT8 TrainTrace;
+
+/** Offset 0x012D - Reserved
**/
- UINT8 Reserved1[7];
+ UINT8 Reserved1[3];
/** Offset 0x0130 - Intel Enhanced Debug
DEPRECATED
@@ -230,9 +262,17 @@ typedef struct {
**/
UINT32 TsegSize;
-/** Offset 0x0138 - Reserved
+/** Offset 0x0138 - MMIO Size
+ Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB
**/
- UINT8 Reserved2[3];
+ UINT16 MmioSize;
+
+/** Offset 0x013A - Probeless Trace
+ Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB.
+ This also requires IED to be enabled.
+ $EN_DIS
+**/
+ UINT8 ProbelessTrace;
/** Offset 0x013B - Enable SMBus
Enable/disable SMBus controller.
@@ -257,9 +297,31 @@ typedef struct {
**/
UINT8 PlatformDebugConsent;
-/** Offset 0x014D - Reserved
+/** Offset 0x014D - DCI Enable
+ Determine if to enable DCI debug from host
+ $EN_DIS
+**/
+ UINT8 DciEn;
+
+/** Offset 0x014E - DCI DbC Mode
+ Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both:
+ Set both USB2/3DBCEN; No Change: Comply with HW value
+ 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change
+**/
+ UINT8 DciDbcMode;
+
+/** Offset 0x014F - Enable DCI ModPHY Pwoer Gate
+ Enable ModPHY Pwoer Gate when DCI is enabled
+ $EN_DIS
**/
- UINT8 Reserved3[4];
+ UINT8 DciModphyPg;
+
+/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support
+ This BIOS option enables kernel and platform debug for USB3 interface over a UFP
+ Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting.
+ 0:Disabled, 1:Enabled, 2:No Change
+**/
+ UINT8 DciUsb3TypecUfpDbg;
/** Offset 0x0151 - PCH Trace Hub Mode
Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger'
@@ -268,9 +330,23 @@ typedef struct {
**/
UINT8 PchTraceHubMode;
-/** Offset 0x0152 - Reserved
+/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size
+ Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 PchTraceHubMemReg0Size;
+
+/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size
+ Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
**/
- UINT8 Reserved4[9];
+ UINT8 PchTraceHubMemReg1Size;
+
+/** Offset 0x0154 - Reserved
+**/
+ UINT8 Reserved2[7];
/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table
0=Disable/Clear, 1=Enable/Set
@@ -278,9 +354,15 @@ typedef struct {
**/
UINT8 X2ApicOptOut;
-/** Offset 0x015C - Reserved
+/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
**/
- UINT8 Reserved5[4];
+ UINT8 DmaControlGuarantee;
+
+/** Offset 0x015D - Reserved
+**/
+ UINT8 Reserved3[3];
/** Offset 0x0160 - Base addresses for VT-d function MMIO access
Base addresses for VT-d MMIO access per VT-d engine
@@ -335,9 +417,11 @@ typedef struct {
**/
UINT8 InternalGfx;
-/** Offset 0x018B - Reserved
+/** Offset 0x018B - Aperture Size
+ Select the Aperture Size.
+ 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB
**/
- UINT8 Reserved6;
+ UINT8 ApertureSize;
/** Offset 0x018C - Board Type
MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile
@@ -348,7 +432,14 @@ typedef struct {
/** Offset 0x018D - Reserved
**/
- UINT8 Reserved7[3];
+ UINT8 Reserved4;
+
+/** Offset 0x018E - DDR Frequency Limit
+ Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
+ 2133, 2400, 2667, 2933 and 0 for Auto.
+ 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto
+**/
+ UINT16 DdrFreqLimit;
/** Offset 0x0190 - SA GV
System Agent dynamic frequency support and when enabled memory will be training
@@ -357,9 +448,17 @@ typedef struct {
**/
UINT8 SaGv;
-/** Offset 0x0191 - Reserved
+/** Offset 0x0191 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
**/
- UINT8 Reserved8[2];
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x0192 - DDR Speed Control
+ DDR Frequency and Gear control for all SAGV points.
+ 0:Auto, 1:Manual
+**/
+ UINT8 DdrSpeedControl;
/** Offset 0x0193 - Rank Margin Tool
Enable/disable Rank Margin Tool.
@@ -399,9 +498,18 @@ typedef struct {
**/
UINT8 DisableDimmCh7;
-/** Offset 0x019C - Reserved
+/** Offset 0x019C - Scrambler Support
+ This option enables data scrambling in memory.
+ $EN_DIS
+**/
+ UINT8 ScramblerSupport;
+
+/** Offset 0x019D - SPD Profile Selected
+ Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP
+ Profile 1, 3=XMP Profile 2
+ 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2
**/
- UINT8 Reserved9[2];
+ UINT8 SpdProfileSelected;
/** Offset 0x019E - Memory Reference Clock
100MHz, 133MHz.
@@ -411,7 +519,104 @@ typedef struct {
/** Offset 0x019F - Reserved
**/
- UINT8 Reserved10[22];
+ UINT8 Reserved5;
+
+/** Offset 0x01A0 - Memory Voltage
+ DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
+ chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc.
+ 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40
+ Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts
+**/
+ UINT16 VddVoltage;
+
+/** Offset 0x01A2 - Memory Ratio
+ Automatic or the frequency will equal ratio times reference clock. Set to Auto to
+ recalculate memory timings listed below.
+ 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15
+**/
+ UINT8 Ratio;
+
+/** Offset 0x01A3 - tCL
+ CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCL;
+
+/** Offset 0x01A4 - tCWL
+ Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tCWL;
+
+/** Offset 0x01A5 - Reserved
+**/
+ UINT8 Reserved6;
+
+/** Offset 0x01A6 - tFAW
+ Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tFAW;
+
+/** Offset 0x01A8 - tRAS
+ RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRAS;
+
+/** Offset 0x01AA - tRCD/tRP
+ RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used
+ if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+**/
+ UINT8 tRCDtRP;
+
+/** Offset 0x01AB - Reserved
+**/
+ UINT8 Reserved7;
+
+/** Offset 0x01AC - tREFI
+ Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tREFI;
+
+/** Offset 0x01AE - tRFC
+ Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT16 tRFC;
+
+/** Offset 0x01B0 - tRRD
+ Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRRD;
+
+/** Offset 0x01B1 - tRTP
+ Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal
+ values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tRTP;
+
+/** Offset 0x01B2 - tWR
+ Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18,
+ 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile).
+ 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30,
+ 34:34, 40:40
+**/
+ UINT8 tWR;
+
+/** Offset 0x01B3 - tWTR
+ Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected
+ == 1 (Custom Profile).
+**/
+ UINT8 tWTR;
+
+/** Offset 0x01B4 - NMode
+ System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N
+**/
+ UINT8 NModeSupport;
/** Offset 0x01B5 - Enable Intel HD Audio (Azalia)
0: Disable, 1: Enable (Default) Azalia controller
@@ -432,9 +637,184 @@ typedef struct {
**/
UINT8 CpuTraceHubMode;
-/** Offset 0x01B8 - Reserved
+/** Offset 0x01B8 - CPU Trace Hub Memory Region 0
+ CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg0Size;
+
+/** Offset 0x01B9 - CPU Trace Hub Memory Region 1
+ CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB,
+ 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB.
+ 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB
+**/
+ UINT8 CpuTraceHubMemReg1Size;
+
+/** Offset 0x01BA - Reserved
+**/
+ UINT8 Reserved8[13];
+
+/** Offset 0x01C7 - HECI Timeouts
+ 0: Disable, 1: Enable (Default) timeout check for HECI
+ $EN_DIS
+**/
+ UINT8 HeciTimeouts;
+
+/** Offset 0x01C8 - HECI1 BAR address
+ BAR address of HECI1
+**/
+ UINT32 Heci1BarAddress;
+
+/** Offset 0x01CC - HECI2 BAR address
+ BAR address of HECI2
+**/
+ UINT32 Heci2BarAddress;
+
+/** Offset 0x01D0 - HECI3 BAR address
+ BAR address of HECI3
+**/
+ UINT32 Heci3BarAddress;
+
+/** Offset 0x01D4 - HG dGPU Power Delay
+ HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is
+ 300=300 microseconds
+**/
+ UINT16 HgDelayAfterPwrEn;
+
+/** Offset 0x01D6 - HG dGPU Reset Delay
+ HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100
+ microseconds
+**/
+ UINT16 HgDelayAfterHoldReset;
+
+/** Offset 0x01D8 - MMIO size adjustment for AUTO mode
+ Positive number means increasing MMIO size, Negative value means decreasing MMIO
+ size: 0 (Default)=no change to AUTO mode MMIO size
+**/
+ UINT16 MmioSizeAdjustment;
+
+/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom
+ Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default):
+ Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after
+ Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume
+ 0:Before, 1:After
+**/
+ UINT8 InitPcieAspmAfterOprom;
+
+/** Offset 0x01DB - Selection of the primary display device
+ 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics
+ 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics
+**/
+ UINT8 PrimaryDisplay;
+
+/** Offset 0x01DC - Selection of PSMI Region size
+ 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0
+ 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB
+**/
+ UINT8 PsmiRegionSize;
+
+/** Offset 0x01DD - Reserved
+**/
+ UINT8 Reserved9[3];
+
+/** Offset 0x01E0 - Temporary MMIO address for GMADR
+ Obsolete field now and it has been extended to 64 bit address, used GmAdr64
+**/
+ UINT32 GmAdr;
+
+/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR
+ The reference code will use this as Temporary MMIO address space to access GTTMMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr
+ to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO
+ + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB)
+**/
+ UINT32 GttMmAdr;
+
+/** Offset 0x01E8 - Selection of iGFX GTT Memory size
+ 1=2MB, 2=4MB, 3=8MB, Default is 3
+ 1:2MB, 2:4MB, 3:8MB
+**/
+ UINT16 GttSize;
+
+/** Offset 0x01EA - Reserved
+**/
+ UINT8 Reserved10[98];
+
+/** Offset 0x024C - Enable/Disable MRC TXT dependency
+ When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
+ MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization
+ $EN_DIS
+**/
+ UINT8 TxtImplemented;
+
+/** Offset 0x024D - Enable/Disable SA OcSupport
+ Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport
+ $EN_DIS
+**/
+ UINT8 SaOcSupport;
+
+/** Offset 0x024E - GT slice Voltage Mode
+ 0(Default): Adaptive, 1: Override
+ 0: Adaptive, 1: Override
+**/
+ UINT8 GtVoltageMode;
+
+/** Offset 0x024F - Maximum GTs turbo ratio override
+ 0(Default)=Minimal/Auto, 60=Maximum
+**/
+ UINT8 GtMaxOcRatio;
+
+/** Offset 0x0250 - The voltage offset applied to GT slice
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 GtVoltageOffset;
+
+/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtVoltageOverride;
+
+/** Offset 0x0254 - adaptive voltage applied during turbo frequencies
+ 0(Default)=Minimal, 2000=Maximum
+**/
+ UINT16 GtExtraTurboVoltage;
+
+/** Offset 0x0256 - voltage offset applied to the SA
+ 0(Default)=Minimal, 1000=Maximum
+**/
+ UINT16 SaVoltageOffset;
+
+/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU
+ Root port Index number to indicate which PCIe root port has dGPU
+**/
+ UINT8 RootPortIndex;
+
+/** Offset 0x0259 - Realtime Memory Timing
+ 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform
+ realtime memory timing changes after MRC_DONE.
+ 0: Disabled, 1: Enabled
+**/
+ UINT8 RealtimeMemoryTiming;
+
+/** Offset 0x025A - This is policy to control iTBT PCIe Multiple Segment setting.
+ When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the
+ TBT PCIe RP are located at Segment1. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieMultipleSegmentEnabled;
+
+/** Offset 0x025B - Enable/Disable SA IPU
+ Enable(Default): Enable SA IPU, Disable: Disable SA IPU
+ $EN_DIS
**/
- UINT8 Reserved11[165];
+ UINT8 SaIpuEnable;
+
+/** Offset 0x025C - IPU IMR Configuration
+ 0:IPU Camera, 1:IPU Gen Default is 0
+ 0:IPU Camera, 1:IPU Gen
+**/
+ UINT8 SaIpuImrConfiguration;
/** Offset 0x025D - IMGU CLKOUT Configuration
The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>.
@@ -444,7 +824,7 @@ typedef struct {
/** Offset 0x0263 - Reserved
**/
- UINT8 Reserved12;
+ UINT8 Reserved11;
/** Offset 0x0264 - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -454,7 +834,7 @@ typedef struct {
/** Offset 0x0268 - Reserved
**/
- UINT8 Reserved13;
+ UINT8 Reserved12;
/** Offset 0x0269 - RpClockReqMsgEnable
**/
@@ -464,9 +844,15 @@ typedef struct {
**/
UINT8 RpPcieThresholdBytes[4];
-/** Offset 0x026E - Reserved
+/** Offset 0x026E - Selection of PSMI Support On/Off
+ 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support
+ $EN_DIS
+**/
+ UINT8 GtPsmiSupport;
+
+/** Offset 0x026F - Reserved
**/
- UINT8 Reserved14[3];
+ UINT8 Reserved13[2];
/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device
0=Disabled,1(Default)=eDP, 2=MIPI DSI
@@ -566,16 +952,76 @@ typedef struct {
/** Offset 0x0281 - Reserved
**/
- UINT8 Reserved15[126];
+ UINT8 Reserved14[121];
+
+/** Offset 0x02FA - DMI Max Link Speed
+ Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2):
+ Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed
+ 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3
+**/
+ UINT8 DmiMaxLinkSpeed;
+
+/** Offset 0x02FB - DMI Equalization Phase 2
+ DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default):
+ AUTO - Use the current default method
+ 0:Disable phase2, 1:Enable phase2, 2:Auto
+**/
+ UINT8 DmiGen3EqPh2Enable;
+
+/** Offset 0x02FC - DMI Gen3 Equalization Phase3
+ DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method,
+ HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software
+ Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static
+ EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just
+ Phase1), Disabled(0x4): Bypass Equalization Phase 3
+ 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3
+**/
+ UINT8 DmiGen3EqPh3Method;
+
+/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming
+ Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static
+ Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiGen3ProgramStaticEq;
+
+/** Offset 0x02FE - DeEmphasis control for DMI
+ DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB
+ 0: -6dB, 1: -3.5dB
+**/
+ UINT8 DmiDeEmphasis;
/** Offset 0x02FF - DMI Gen3 Root port preset values per lane
Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane
**/
UINT8 DmiGen3RootPortPreset[8];
-/** Offset 0x0307 - Reserved
+/** Offset 0x0307 - DMI Gen3 End port preset values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane
+**/
+ UINT8 DmiGen3EndPointPreset[8];
+
+/** Offset 0x030F - DMI Gen3 End port Hint values per lane
+ Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 DmiGen3EndPointHint[8];
+
+/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control
+ Range: 0-15, 0 is default for each bundle, must be specified based upon platform design
+**/
+ UINT8 DmiGen3RxCtlePeaking[4];
+
+/** Offset 0x031B - BIST on Reset
+ Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 BistOnReset;
+
+/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable
+ Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
**/
- UINT8 Reserved16[22];
+ UINT8 SkipStopPbet;
/** Offset 0x031D - C6DRAM power gating feature
This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM
@@ -585,9 +1031,35 @@ typedef struct {
**/
UINT8 EnableC6Dram;
-/** Offset 0x031E - Reserved
+/** Offset 0x031E - Over clocking support
+ Over clocking support; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 OcSupport;
+
+/** Offset 0x031F - Over clocking Lock
+ Over clocking Lock Enable/Disable; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 OcLock;
+
+/** Offset 0x0320 - Maximum Core Turbo Ratio Override
+ Maximum core turbo ratio override allows to increase CPU core frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
**/
- UINT8 Reserved17[5];
+ UINT8 CoreMaxOcRatio;
+
+/** Offset 0x0321 - Core voltage mode
+ Core voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 CoreVoltageMode;
+
+/** Offset 0x0322 - Maximum clr turbo ratio override
+ Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85
+**/
+ UINT8 RingMaxOcRatio;
/** Offset 0x0323 - Hyper Threading Enable/Disable
Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b>
@@ -595,9 +1067,11 @@ typedef struct {
**/
UINT8 HyperThreading;
-/** Offset 0x0324 - Reserved
+/** Offset 0x0324 - Enable or Disable CPU Ratio Override
+ Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
**/
- UINT8 Reserved18;
+ UINT8 CpuRatioOverride;
/** Offset 0x0325 - CPU ratio value
CPU ratio value. Valid Range 0 to 63
@@ -611,9 +1085,12 @@ typedef struct {
**/
UINT8 BootFrequency;
-/** Offset 0x0327 - Reserved
+/** Offset 0x0327 - Number of active cores
+ Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2:
+ 2 </b>;<b>3: 3 </b>
+ 0:All, 1:1, 2:2, 3:3
**/
- UINT8 Reserved19;
+ UINT8 ActiveCoreCount;
/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting
<b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.-
@@ -622,9 +1099,12 @@ typedef struct {
**/
UINT8 FClkFrequency;
-/** Offset 0x0329 - Reserved
+/** Offset 0x0329 - Set JTAG power in C10 and deeper power states
+ False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10
+ and deeper power states for debug purpose. <b>0: False</b>; 1: True.
+ 0: False, 1: True
**/
- UINT8 Reserved20;
+ UINT8 JtagC10PowerGateDisable;
/** Offset 0x032A - Enable or Disable VMX
Enable or Disable VMX; 0: Disable; <b>1: Enable</b>.
@@ -632,9 +1112,111 @@ typedef struct {
**/
UINT8 VmxEnable;
-/** Offset 0x032B - Reserved
+/** Offset 0x032B - AVX2 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx2RatioOffset;
+
+/** Offset 0x032C - AVX3 Ratio Offset
+ 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio
+ vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B.
+**/
+ UINT8 Avx3RatioOffset;
+
+/** Offset 0x032D - BCLK Adaptive Voltage Enable
+ When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0:
+ Disable;<b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 BclkAdaptiveVoltage;
+
+/** Offset 0x032E - core voltage override
+ The core voltage override which is applied to the entire range of cpu core frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageOverride;
+
+/** Offset 0x0330 - Core Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 CoreVoltageAdaptive;
+
+/** Offset 0x0332 - Core Turbo voltage Offset
+ The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000
+**/
+ UINT16 CoreVoltageOffset;
+
+/** Offset 0x0334 - Core PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 CorePllVoltageOffset;
+
+/** Offset 0x0335 - Ring Downbin
+ Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always
+ lower than the core ratio.0: Disable; <b>1: Enable.</b>
+ $EN_DIS
+**/
+ UINT8 RingDownBin;
+
+/** Offset 0x0336 - Ring voltage mode
+ Ring voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 RingVoltageMode;
+
+/** Offset 0x0337 - TjMax Offset
+ TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support
+ TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63
+**/
+ UINT8 TjMaxOffset;
+
+/** Offset 0x0338 - Ring voltage override
+ The ring voltage override which is applied to the entire range of cpu ring frequencies.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageOverride;
+
+/** Offset 0x033A - Ring Turbo voltage Adaptive
+ Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 RingVoltageAdaptive;
+
+/** Offset 0x033C - Ring Turbo voltage Offset
+ The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000
+**/
+ UINT16 RingVoltageOffset;
+
+/** Offset 0x033E - Enable or Disable TME
+ Enable or Disable TME; <b>0: Disable<b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TmeEnable;
+
+/** Offset 0x033F - Enable CPU CrashLog
+ Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
+
+/** Offset 0x0340 - Reserved
+**/
+ UINT8 Reserved15[8];
+
+/** Offset 0x0348 - CPU Run Control
+ Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
+ No Change</b>
+ 0:Disabled, 1:Enabled, 2:No Change
**/
- UINT8 Reserved21[31];
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x0349 - CPU Run Control Lock
+ Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
/** Offset 0x034A - BiosGuard
Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable
@@ -646,9 +1228,21 @@ typedef struct {
**/
UINT8 BiosGuardToolsInterface;
-/** Offset 0x034C - Reserved
+/** Offset 0x034C - EnableSgx
+ Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control
+ 0: Disable, 1: Enable, 2: Software Control
**/
- UINT8 Reserved22[4];
+ UINT8 EnableSgx;
+
+/** Offset 0x034D - Txt
+ Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable
+ $EN_DIS
+**/
+ UINT8 Txt;
+
+/** Offset 0x034E - Reserved
+**/
+ UINT8 Reserved16[2];
/** Offset 0x0350 - PrmrrSize
Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
@@ -660,9 +1254,10 @@ typedef struct {
**/
UINT32 SinitMemorySize;
-/** Offset 0x0358 - Reserved
+/** Offset 0x0358 - TxtDprMemoryBase
+ Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable
**/
- UINT8 Reserved23[8];
+ UINT64 TxtDprMemoryBase;
/** Offset 0x0360 - TxtHeapMemorySize
Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable
@@ -674,9 +1269,54 @@ typedef struct {
**/
UINT32 TxtDprMemorySize;
-/** Offset 0x0368 - Reserved
+/** Offset 0x0368 - BiosAcmBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 BiosAcmBase;
+
+/** Offset 0x036C - BiosAcmSize
+ Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable
+**/
+ UINT32 BiosAcmSize;
+
+/** Offset 0x0370 - ApStartupBase
+ Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable
+**/
+ UINT32 ApStartupBase;
+
+/** Offset 0x0374 - TgaSize
+ Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable
+**/
+ UINT32 TgaSize;
+
+/** Offset 0x0378 - TxtLcpPdBase
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable
+**/
+ UINT64 TxtLcpPdBase;
+
+/** Offset 0x0380 - TxtLcpPdSize
+ Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable
**/
- UINT8 Reserved24[87];
+ UINT64 TxtLcpPdSize;
+
+/** Offset 0x0388 - IsTPMPresence
+ IsTPMPresence default values
+**/
+ UINT8 IsTPMPresence;
+
+/** Offset 0x0389 - Reserved
+**/
+ UINT8 Reserved17[6];
+
+/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle
+ Enable PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtleEnable[24];
+
+/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value
+ PCH PCIe Gen 3 Set CTLE Value.
+**/
+ UINT8 PchPcieHsioRxSetCtle[24];
/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override
0: Disable; 1: Enable.
@@ -828,9 +1468,23 @@ typedef struct {
**/
UINT8 PchSataHsioTxGen3DeEmph[8];
-/** Offset 0x056F - Reserved
+/** Offset 0x056F - PCH LPC Enhance the port 8xh decoding
+ Original LPC only decodes one byte of port 80h.
+ $EN_DIS
+**/
+ UINT8 PchLpcEnhancePort8xhDecoding;
+
+/** Offset 0x0570 - PCH Port80 Route
+ Control where the Port 80h cycles are sent, 0: LPC; 1: PCI.
+ $EN_DIS
**/
- UINT8 Reserved25[3];
+ UINT8 PchPort80Route;
+
+/** Offset 0x0571 - Enable SMBus ARP support
+ Enable SMBus ARP support.
+ $EN_DIS
+**/
+ UINT8 SmbusArpEnable;
/** Offset 0x0572 - Number of RsvdSmbusAddressTable.
The number of elements in the RsvdSmbusAddressTable.
@@ -839,7 +1493,18 @@ typedef struct {
/** Offset 0x0573 - Reserved
**/
- UINT8 Reserved26[4];
+ UINT8 Reserved18;
+
+/** Offset 0x0574 - SMBUS Base Address
+ SMBUS Base Address (IO space).
+**/
+ UINT16 PchSmbusIoBase;
+
+/** Offset 0x0576 - Enable SMBus Alert Pin
+ Enable SMBus Alert Pin.
+ $EN_DIS
+**/
+ UINT8 PchSmbAlertEnable;
/** Offset 0x0577 - Usage type for ClkSrc
0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
@@ -854,7 +1519,7 @@ typedef struct {
/** Offset 0x0597 - Reserved
**/
- UINT8 Reserved27[5];
+ UINT8 Reserved19[5];
/** Offset 0x059C - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -875,9 +1540,43 @@ typedef struct {
**/
UINT8 SerialIoUartDebugControllerNumber;
-/** Offset 0x05A2 - Reserved
+/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow
+ Enables UART hardware flow control, CTS and RTS lines.
+ $EN_DIS
+**/
+ UINT8 SerialIoUartDebugAutoFlow;
+
+/** Offset 0x05A3 - Reserved
+**/
+ UINT8 Reserved20;
+
+/** Offset 0x05A4 - Serial Io Uart Debug BaudRate
+ Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
+ 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000
**/
- UINT8 Reserved28[14];
+ UINT32 SerialIoUartDebugBaudRate;
+
+/** Offset 0x05A8 - Serial Io Uart Debug Parity
+ Set default Parity.
+ 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartDebugParity;
+
+/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits
+ Set default stop bits.
+ 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits
+**/
+ UINT8 SerialIoUartDebugStopBits;
+
+/** Offset 0x05AA - Serial Io Uart Debug Data Bits
+ Set default word length. 0: Default, 5,6,7,8
+ 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS
+**/
+ UINT8 SerialIoUartDebugDataBits;
+
+/** Offset 0x05AB - Reserved
+**/
+ UINT8 Reserved21[5];
/** Offset 0x05B0 - ISA Serial Base selection
Select ISA Serial Base address. Default is 0x3F8.
@@ -885,9 +1584,25 @@ typedef struct {
**/
UINT8 PcdIsaSerialUartBase;
-/** Offset 0x05B1 - Reserved
+/** Offset 0x05B1 - GT PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
**/
- UINT8 Reserved29[4];
+ UINT8 GtPllVoltageOffset;
+
+/** Offset 0x05B2 - Ring PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 RingPllVoltageOffset;
+
+/** Offset 0x05B3 - System Agent PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 SaPllVoltageOffset;
+
+/** Offset 0x05B4 - Memory Controller PLL voltage offset
+ Core PLL voltage offset. <b>0: No offset</b>. Range 0-63
+**/
+ UINT8 McPllVoltageOffset;
/** Offset 0x05B5 - MRC Safe Config
Enables/Disable MRC Safe Config
@@ -943,9 +1658,18 @@ typedef struct {
**/
UINT8 TcssDma1En;
-/** Offset 0x05BE - Reserved
+/** Offset 0x05BE - PcdSerialDebugBaudRate
+ Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200.
+ 3:9600, 4:19200, 6:56700, 7:115200
**/
- UINT8 Reserved30[2];
+ UINT8 PcdSerialDebugBaudRate;
+
+/** Offset 0x05BF - HobBufferSize
+ Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB
+ total HOB size).
+ 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value
+**/
+ UINT8 HobBufferSize;
/** Offset 0x05C0 - Early Command Training
Enables/Disable Early Command Training
@@ -953,9 +1677,324 @@ typedef struct {
**/
UINT8 ECT;
-/** Offset 0x05C1 - Reserved
+/** Offset 0x05C1 - SenseAmp Offset Training
+ Enables/Disable SenseAmp Offset Training
+ $EN_DIS
+**/
+ UINT8 SOT;
+
+/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D
+ Enables/Disable Early ReadMPR Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDMPRTC2D;
+
+/** Offset 0x05C3 - Read MPR Training
+ Enables/Disable Read MPR Training
+ $EN_DIS
+**/
+ UINT8 RDMPRT;
+
+/** Offset 0x05C4 - Receive Enable Training
+ Enables/Disable Receive Enable Training
+ $EN_DIS
**/
- UINT8 Reserved31[102];
+ UINT8 RCVET;
+
+/** Offset 0x05C5 - Jedec Write Leveling
+ Enables/Disable Jedec Write Leveling
+ $EN_DIS
+**/
+ UINT8 JWRL;
+
+/** Offset 0x05C6 - Early Write Time Centering 2D
+ Enables/Disable Early Write Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 EWRTC2D;
+
+/** Offset 0x05C7 - Early Read Time Centering 2D
+ Enables/Disable Early Read Time Centering 2D
+ $EN_DIS
+**/
+ UINT8 ERDTC2D;
+
+/** Offset 0x05C8 - Write Timing Centering 1D
+ Enables/Disable Write Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRTC1D;
+
+/** Offset 0x05C9 - Write Voltage Centering 1D
+ Enables/Disable Write Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 WRVC1D;
+
+/** Offset 0x05CA - Read Timing Centering 1D
+ Enables/Disable Read Timing Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDTC1D;
+
+/** Offset 0x05CB - Dimm ODT Training
+ Enables/Disable Dimm ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTT;
+
+/** Offset 0x05CC - DIMM RON Training
+ Enables/Disable DIMM RON Training
+ $EN_DIS
+**/
+ UINT8 DIMMRONT;
+
+/** Offset 0x05CD - Write Drive Strength/Equalization 2D
+ Enables/Disable Write Drive Strength/Equalization 2D
+ $EN_DIS
+**/
+ UINT8 WRDSEQT;
+
+/** Offset 0x05CE - Write Slew Rate Training
+ Enables/Disable Write Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 WRSRT;
+
+/** Offset 0x05CF - Read ODT Training
+ Enables/Disable Read ODT Training
+ $EN_DIS
+**/
+ UINT8 RDODTT;
+
+/** Offset 0x05D0 - Read Equalization Training
+ Enables/Disable Read Equalization Training
+ $EN_DIS
+**/
+ UINT8 RDEQT;
+
+/** Offset 0x05D1 - Read Amplifier Training
+ Enables/Disable Read Amplifier Training
+ $EN_DIS
+**/
+ UINT8 RDAPT;
+
+/** Offset 0x05D2 - Write Timing Centering 2D
+ Enables/Disable Write Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRTC2D;
+
+/** Offset 0x05D3 - Read Timing Centering 2D
+ Enables/Disable Read Timing Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDTC2D;
+
+/** Offset 0x05D4 - Write Voltage Centering 2D
+ Enables/Disable Write Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 WRVC2D;
+
+/** Offset 0x05D5 - Read Voltage Centering 2D
+ Enables/Disable Read Voltage Centering 2D
+ $EN_DIS
+**/
+ UINT8 RDVC2D;
+
+/** Offset 0x05D6 - Command Voltage Centering
+ Enables/Disable Command Voltage Centering
+ $EN_DIS
+**/
+ UINT8 CMDVC;
+
+/** Offset 0x05D7 - Late Command Training
+ Enables/Disable Late Command Training
+ $EN_DIS
+**/
+ UINT8 LCT;
+
+/** Offset 0x05D8 - Round Trip Latency Training
+ Enables/Disable Round Trip Latency Training
+ $EN_DIS
+**/
+ UINT8 RTL;
+
+/** Offset 0x05D9 - Turn Around Timing Training
+ Enables/Disable Turn Around Timing Training
+ $EN_DIS
+**/
+ UINT8 TAT;
+
+/** Offset 0x05DA - Memory Test
+ Enables/Disable Memory Test
+ $EN_DIS
+**/
+ UINT8 MEMTST;
+
+/** Offset 0x05DB - DIMM SPD Alias Test
+ Enables/Disable DIMM SPD Alias Test
+ $EN_DIS
+**/
+ UINT8 ALIASCHK;
+
+/** Offset 0x05DC - Receive Enable Centering 1D
+ Enables/Disable Receive Enable Centering 1D
+ $EN_DIS
+**/
+ UINT8 RCVENC1D;
+
+/** Offset 0x05DD - Retrain Margin Check
+ Enables/Disable Retrain Margin Check
+ $EN_DIS
+**/
+ UINT8 RMC;
+
+/** Offset 0x05DE - Write Drive Strength Up/Dn independently
+ Enables/Disable Write Drive Strength Up/Dn independently
+ $EN_DIS
+**/
+ UINT8 WRDSUDT;
+
+/** Offset 0x05DF - ECC Support
+ Enables/Disable ECC Support
+ $EN_DIS
+**/
+ UINT8 EccSupport;
+
+/** Offset 0x05E0 - Reserved
+**/
+ UINT8 Reserved22[44];
+
+/** Offset 0x060C - Memory Remap
+ Enables/Disable Memory Remap
+ $EN_DIS
+**/
+ UINT8 RemapEnable;
+
+/** Offset 0x060D - Rank Interleave support
+ Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at
+ the same time.
+ $EN_DIS
+**/
+ UINT8 RankInterleave;
+
+/** Offset 0x060E - Enhanced Interleave support
+ Enables/Disable Enhanced Interleave support
+ $EN_DIS
+**/
+ UINT8 EnhancedInterleave;
+
+/** Offset 0x060F - Ch Hash Support
+ Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode
+ $EN_DIS
+**/
+ UINT8 ChHashEnable;
+
+/** Offset 0x0610 - Extern Therm Status
+ Enables/Disable Extern Therm Status
+ $EN_DIS
+**/
+ UINT8 EnableExtts;
+
+/** Offset 0x0611 - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDn;
+
+/** Offset 0x0612 - DDR PowerDown and idle counter
+ Enables/Disable DDR PowerDown and idle counter(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 EnablePwrDnLpddr;
+
+/** Offset 0x0613 - SelfRefresh Enable
+ Enables/Disable SelfRefresh Enable
+ $EN_DIS
+**/
+ UINT8 SrefCfgEna;
+
+/** Offset 0x0614 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature(For LPDDR Only)
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeatLpddr;
+
+/** Offset 0x0615 - Throttler CKEMin Defeature
+ Enables/Disable Throttler CKEMin Defeature
+ $EN_DIS
+**/
+ UINT8 ThrtCkeMinDefeat;
+
+/** Offset 0x0616 - Enable RH Prevention
+ Enables/Disable RH Prevention
+ $EN_DIS
+**/
+ UINT8 RhPrevention;
+
+/** Offset 0x0617 - Exit On Failure (MRC)
+ Enables/Disable Exit On Failure (MRC)
+ $EN_DIS
+**/
+ UINT8 ExitOnFailure;
+
+/** Offset 0x0618 - Reserved
+**/
+ UINT8 Reserved23[2];
+
+/** Offset 0x061A - Duty Cycle Correction Training
+ Enable/Disable Duty Cycle Correction Training
+ $EN_DIS
+**/
+ UINT8 DCC;
+
+/** Offset 0x061B - Read Voltage Centering 1D
+ Enable/Disable Read Voltage Centering 1D
+ $EN_DIS
+**/
+ UINT8 RDVC1D;
+
+/** Offset 0x061C - TxDqTCO Comp Training
+ Enable/Disable TxDqTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCO;
+
+/** Offset 0x061D - ClkTCO Comp Training
+ Enable/Disable ClkTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 CLKTCO;
+
+/** Offset 0x061E - CMD Slew Rate Training
+ Enable/Disable CMD Slew Rate Training
+ $EN_DIS
+**/
+ UINT8 CMDSR;
+
+/** Offset 0x061F - CMD Drive Strength and Tx Equalization
+ Enable/Disable CMD Drive Strength and Tx Equalization
+ $EN_DIS
+**/
+ UINT8 CMDDSEQ;
+
+/** Offset 0x0620 - DIMM CA ODT Training
+ Enable/Disable DIMM CA ODT Training
+ $EN_DIS
+**/
+ UINT8 DIMMODTCA;
+
+/** Offset 0x0621 - TxDqsTCO Comp Training
+ Enable/Disable TxDqsTCO Comp Training
+ $EN_DIS
+**/
+ UINT8 TXTCODQS;
+
+/** Offset 0x0622 - Reserved
+**/
+ UINT8 Reserved24[5];
/** Offset 0x0627 - Rank Margin Tool Per Bit
Enable/Disable Rank Margin Tool Per Bit
@@ -965,7 +2004,30 @@ typedef struct {
/** Offset 0x0628 - Reserved
**/
- UINT8 Reserved32[6];
+ UINT8 Reserved25[2];
+
+/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedClock;
+
+/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP
+ $EN_DIS
+**/
+ UINT8 Ddr4DdpSharedZq;
+
+/** Offset 0x062C - Ch Hash Interleaved Bit
+ Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave
+ the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8
+ 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13
+**/
+ UINT8 ChHashInterleaveBit;
+
+/** Offset 0x062D - Reserved
+**/
+ UINT8 Reserved26;
/** Offset 0x062E - Ch Hash Mask
Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
@@ -973,9 +2035,106 @@ typedef struct {
**/
UINT16 ChHashMask;
-/** Offset 0x0630 - Reserved
+/** Offset 0x0630 - Base reference clock value
+ Base reference clock value, in Hertz(Default is 125Hz)
+ 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz
+**/
+ UINT32 BClkFrequency;
+
+/** Offset 0x0634 - EPG DIMM Idd3N
+ Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on
+ a per DIMM basis. Default is 26
+**/
+ UINT16 Idd3n;
+
+/** Offset 0x0636 - EPG DIMM Idd3P
+ Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated
+ on a per DIMM basis. Default is 11
+**/
+ UINT16 Idd3p;
+
+/** Offset 0x0638 - RH Activation Probability
+ RH Activation Probability, Probability value is 1/2^(inputvalue)
+**/
+ UINT8 RhActProbability;
+
+/** Offset 0x0639 - Reserved
+**/
+ UINT8 Reserved27[40];
+
+/** Offset 0x0661 - Throttler CKEMin Timer
+ Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
+ Dfault is 0x00
+**/
+ UINT8 ThrtCkeMinTmr;
+
+/** Offset 0x0662 - Rapl Power Floor Ch0
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh0;
+
+/** Offset 0x0663 - Rapl Power Floor Ch1
+ Power budget ,range[255;0],(0= 5.3W Def)
+**/
+ UINT8 RaplPwrFlCh1;
+
+/** Offset 0x0664 - Command Rate Support
+ CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs
+ 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS
+**/
+ UINT8 EnCmdRate;
+
+/** Offset 0x0665 - REFRESH_2X_MODE
+ 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot
+ 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only
+**/
+ UINT8 Refresh2X;
+
+/** Offset 0x0666 - Energy Performance Gain
+ Enable/disable(default) Energy Performance Gain.
+ $EN_DIS
+**/
+ UINT8 EpgEnable;
+
+/** Offset 0x0667 - Row Hammer Solution
+ Type of method used to prevent Row Hammer. Default is Hardware RHP
+ 0:Hardware RHP, 1:2x Refresh
+**/
+ UINT8 RhSolution;
+
+/** Offset 0x0668 - User Manual Threshold
+ Disabled: Predefined threshold will be used.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserThresholdEnable;
+
+/** Offset 0x0669 - User Manual Budget
+ Disabled: Configuration of memories will defined the Budget value.\n
+ Enabled: User Input will be used.
+ $EN_DIS
+**/
+ UINT8 UserBudgetEnable;
+
+/** Offset 0x066A - Reserved
**/
- UINT8 Reserved33[62];
+ UINT8 Reserved28;
+
+/** Offset 0x066B - Pwr Down Idle Timer
+ The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
+ AUTO: 64 for ULX/ULT, 128 for DT/Halo
+**/
+ UINT8 PwdwnIdleCounter;
+
+/** Offset 0x066C - Reserved
+**/
+ UINT8 Reserved29;
+
+/** Offset 0x066D - Bitmask of ranks that have CA bus terminated
+ Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
+ Rank0 is terminating and Rank1 is non-terminating</b>
+**/
+ UINT8 CmdRanksTerminated;
/** Offset 0x066E - PcdSerialDebugLevel
Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
@@ -986,9 +2145,17 @@ typedef struct {
**/
UINT8 PcdSerialDebugLevel;
-/** Offset 0x066F - Reserved
+/** Offset 0x066F - Fivr Faults
+ Fivr Faults; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
+**/
+ UINT8 FivrFaults;
+
+/** Offset 0x0670 - Fivr Efficiency
+ Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b>
+ $EN_DIS
**/
- UINT8 Reserved34[2];
+ UINT8 FivrEfficiency;
/** Offset 0x0671 - Safe Mode Support
This option configures the varous items in the IO and MC to be more conservative.(def=Disable)
@@ -996,9 +2163,17 @@ typedef struct {
**/
UINT8 SafeMode;
-/** Offset 0x0672 - Reserved
+/** Offset 0x0672 - Ask MRC to clear memory content
+ Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory.
+ $EN_DIS
+**/
+ UINT8 CleanMemory;
+
+/** Offset 0x0673 - LpDdrDqDqsReTraining
+ Enables/Disable LpDdrDqDqsReTraining
+ $EN_DIS
**/
- UINT8 Reserved35[2];
+ UINT8 LpDdrDqDqsReTraining;
/** Offset 0x0674 - TCSS USB Port Enable
Bitmap for per port enabling
@@ -1007,7 +2182,66 @@ typedef struct {
/** Offset 0x0675 - Reserved
**/
- UINT8 Reserved36[71];
+ UINT8 Reserved30;
+
+/** Offset 0x0676 - Post Code Output Port
+ This option configures Post Code Output Port
+**/
+ UINT16 PostCodeOutputPort;
+
+/** Offset 0x0678 - RMTLoopCount
+ Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO
+**/
+ UINT8 RMTLoopCount;
+
+/** Offset 0x0679 - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x067A - Reserved
+**/
+ UINT8 Reserved31[18];
+
+/** Offset 0x068C - Size of PCIe IMR.
+ Size of PCIe IMR in megabytes
+**/
+ UINT16 PcieImrSize;
+
+/** Offset 0x068E - Enable PCIe IMR
+ 0: Disable(AUTO), 1: Enable
+ $EN_DIS
+**/
+ UINT8 PcieImrEnabled;
+
+/** Offset 0x068F - Reserved
+**/
+ UINT8 Reserved32[2];
+
+/** Offset 0x0691 - SerialDebugMrcLevel
+ MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
+ Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings,
+ Info & Verbose.
+ 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load
+ Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose
+**/
+ UINT8 SerialDebugMrcLevel;
+
+/** Offset 0x0692 - Reserved
+**/
+ UINT8 Reserved33[32];
+
+/** Offset 0x06B2 - Ddr4OneDpc
+ DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
+ or on both (default)
+ 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled
+**/
+ UINT8 Ddr4OneDpc;
+
+/** Offset 0x06B3 - Reserved
+**/
+ UINT8 Reserved34[9];
/** Offset 0x06BC - Command Pins Mirrored
BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
@@ -1017,7 +2251,7 @@ typedef struct {
/** Offset 0x06C0 - Reserved
**/
- UINT8 Reserved37[5];
+ UINT8 Reserved35[5];
/** Offset 0x06C5 - Skip external display device scanning
Enable: Do not scan for external display device, Disable (Default): Scan external
@@ -1026,9 +2260,18 @@ typedef struct {
**/
UINT8 SkipExtGfxScan;
-/** Offset 0x06C6 - Reserved
+/** Offset 0x06C6 - Generate BIOS Data ACPI Table
+ Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it
+ $EN_DIS
+**/
+ UINT8 BdatEnable;
+
+/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM
+ Detect and report if external graphics device only support LegacyOpROM or not (to
+ support CSM auto-enable). Enable(Default)=1, Disable=0
+ $EN_DIS
**/
- UINT8 Reserved38[2];
+ UINT8 ScanExtGfxForLegacyOpRom;
/** Offset 0x06C8 - Lock PCU Thermal Management registers
Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0
@@ -1038,7 +2281,72 @@ typedef struct {
/** Offset 0x06C9 - Reserved
**/
- UINT8 Reserved39[122];
+ UINT8 Reserved36;
+
+/** Offset 0x06CA - Panel Power Enable
+ Control for enabling/disabling VDD force bit (Required only for early enabling of
+ eDP panel). 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 PanelPowerEnable;
+
+/** Offset 0x06CB - BdatTestType
+ Indicates the type of Memory Training data to populate into the BDAT ACPI table.
+ 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D
+**/
+ UINT8 BdatTestType;
+
+/** Offset 0x06CC - Reserved
+**/
+ UINT8 Reserved37[98];
+
+/** Offset 0x072E - TotalFlashSize
+ Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
+**/
+ UINT16 TotalFlashSize;
+
+/** Offset 0x0730 - BiosSize
+ The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard !=
+ 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected
+ Range) so that a BIOS Update Script can be stored in the DPR.
+**/
+ UINT16 BiosSize;
+
+/** Offset 0x0732 - Reserved
+**/
+ UINT8 Reserved38[12];
+
+/** Offset 0x073E - Smbus dynamic power gating
+ Disable or Enable Smbus dynamic power gating.
+ $EN_DIS
+**/
+ UINT8 SmbusDynamicPowerGating;
+
+/** Offset 0x073F - Disable and Lock Watch Dog Register
+ Set 1 to clear WDT status, then disable and lock WDT registers.
+ $EN_DIS
+**/
+ UINT8 WdtDisableAndLock;
+
+/** Offset 0x0740 - SMBUS SPD Write Disable
+ Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write
+ Disable bit. For security recommendations, SPD write disable bit must be set.
+ $EN_DIS
+**/
+ UINT8 SmbusSpdWriteDisable;
+
+/** Offset 0x0741 - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
/** Offset 0x0743 - Enable HD Audio Link
Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
@@ -1048,7 +2356,7 @@ typedef struct {
/** Offset 0x0744 - Reserved
**/
- UINT8 Reserved40[3];
+ UINT8 Reserved39[3];
/** Offset 0x0747 - Enable HD Audio DMIC_N Link
Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
@@ -1057,7 +2365,7 @@ typedef struct {
/** Offset 0x0749 - Reserved
**/
- UINT8 Reserved41[3];
+ UINT8 Reserved40[3];
/** Offset 0x074C - DMIC<N> ClkA Pin Muxing (N - DMIC number)
Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
@@ -1077,7 +2385,7 @@ typedef struct {
/** Offset 0x075D - Reserved
**/
- UINT8 Reserved42[3];
+ UINT8 Reserved41[3];
/** Offset 0x0760 - DMIC<N> Data Pin Muxing
Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
@@ -1112,9 +2420,53 @@ typedef struct {
**/
UINT8 PchHdaIDispCodecDisconnect;
-/** Offset 0x0775 - Reserved
+/** Offset 0x0775 - Force ME DID Init Status
+ Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set
+ ME DID init stat value
+ $EN_DIS
+**/
+ UINT8 DidInitStat;
+
+/** Offset 0x0776 - CPU Replaced Polling Disable
+ Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop
+ $EN_DIS
+**/
+ UINT8 DisableCpuReplacedPolling;
+
+/** Offset 0x0777 - ME DID Message
+ (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable
+ will prevent the DID message from being sent)
+ $EN_DIS
+**/
+ UINT8 SendDidMsg;
+
+/** Offset 0x0778 - Check HECI message before send
+ Test, 0: disable, 1: enable, Enable/Disable message check.
+ $EN_DIS
+**/
+ UINT8 DisableMessageCheck;
+
+/** Offset 0x0779 - Skip MBP HOB
+ Test, 0: disable, 1: enable, Enable/Disable MOB HOB.
+ $EN_DIS
+**/
+ UINT8 SkipMbpHob;
+
+/** Offset 0x077A - HECI2 Interface Communication
+ Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space.
+ $EN_DIS
+**/
+ UINT8 HeciCommunication2;
+
+/** Offset 0x077B - Enable KT device
+ Test, 0: disable, 1: enable, Enable or Disable KT device.
+ $EN_DIS
+**/
+ UINT8 KtDeviceEnable;
+
+/** Offset 0x077C - Reserved
**/
- UINT8 Reserved43[295];
+ UINT8 Reserved42[288];
/** Offset 0x089C - Skip CPU replacement check
Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
@@ -1124,7 +2476,7 @@ typedef struct {
/** Offset 0x089D - Reserved
**/
- UINT8 Reserved44;
+ UINT8 Reserved43;
/** Offset 0x089E - Serial Io Uart Debug Mode
Select SerialIo Uart Controller mode
@@ -1135,7 +2487,7 @@ typedef struct {
/** Offset 0x089F - Reserved
**/
- UINT8 Reserved45[121];
+ UINT8 Reserved44[129];
} FSP_M_CONFIG;
/** Fsp M UPD Configuration
@@ -1154,11 +2506,11 @@ typedef struct {
**/
FSP_M_CONFIG FspmConfig;
-/** Offset 0x0918
+/** Offset 0x0920
**/
- UINT8 UnusedUpdSpace24[6];
+ UINT8 UnusedUpdSpace25[6];
-/** Offset 0x091E
+/** Offset 0x0926
**/
UINT16 UpdTerminator;
} FSPM_UPD;
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
index 46492de52c..c7086cd4a6 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
@@ -85,9 +85,26 @@ typedef struct {
**/
typedef struct {
-/** Offset 0x0020 - Reserved
+/** Offset 0x0020 - Logo Pointer
+ Points to PEI Display Logo Image
**/
- UINT8 Reserved0[16];
+ UINT32 LogoPtr;
+
+/** Offset 0x0024 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0028 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x002C - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
/** Offset 0x0030 - Graphics Configuration Ptr
Points to VBT
@@ -100,9 +117,31 @@ typedef struct {
**/
UINT8 Device4Enable;
-/** Offset 0x0035 - Reserved
+/** Offset 0x0035 - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x0036 - Reserved
+**/
+ UINT8 Reserved0[2];
+
+/** Offset 0x0038 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x003C - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0040 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
**/
- UINT8 Reserved1[12];
+ UINT8 TurboMode;
/** Offset 0x0041 - Enable SATA SALP Support
Enable/disable SATA Aggressive Link Power Management.
@@ -142,7 +181,65 @@ typedef struct {
/** Offset 0x006D - Reserved
**/
- UINT8 Reserved2[28];
+ UINT8 Reserved1[3];
+
+/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x0074 - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x0075 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x007D - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x007E - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x007F - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x0080 - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x0081 - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x0082 - Reserved
+**/
+ UINT8 Reserved2[2];
+
+/** Offset 0x0084 - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
/** Offset 0x0089 - Enable SATA
Enable/disable SATA controller.
@@ -162,9 +259,21 @@ typedef struct {
**/
UINT8 SerialIoSpiMode[7];
-/** Offset 0x0092 - Reserved
+/** Offset 0x0092 - SPI<N> Chip Select Polarity
+ Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow,
+ 1:SerialIoSpiCsActiveHigh
**/
- UINT8 Reserved3[35];
+ UINT8 SerialIoSpiCsPolarity[14];
+
+/** Offset 0x00A0 - Reserved
+**/
+ UINT8 Reserved3[14];
+
+/** Offset 0x00AE - SPIn Default Chip Select Output
+ Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
+ options: 0:CS0, 1:CS1
+**/
+ UINT8 SerialIoSpiDefaultCsOutput[7];
/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW
Sets Default CS Mode Hardware or Software. N represents controller index: SPI0,
@@ -187,7 +296,38 @@ typedef struct {
/** Offset 0x00CA - Reserved
**/
- UINT8 Reserved4[65];
+ UINT8 Reserved4[2];
+
+/** Offset 0x00CC - Default BaudRate for each Serial IO UART
+ Set default BaudRate Supported from 0 - default to 6000000
+**/
+ UINT32 SerialIoUartBaudRate[7];
+
+/** Offset 0x00E8 - Default ParityType for each Serial IO UART
+ Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity
+**/
+ UINT8 SerialIoUartParity[7];
+
+/** Offset 0x00EF - Default DataBits for each Serial IO UART
+ Set default word length. 0: Default, 5,6,7,8
+**/
+ UINT8 SerialIoUartDataBits[7];
+
+/** Offset 0x00F6 - Default StopBits for each Serial IO UART
+ Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3:
+ TwoStopBits
+**/
+ UINT8 SerialIoUartStopBits[7];
+
+/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode
+ Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto
+**/
+ UINT8 SerialIoUartPowerGating[7];
+
+/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it
+ Set DMA/PIO mode. 0: Disabled, 1: Enabled
+**/
+ UINT8 SerialIoUartDmaEnable[7];
/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines
Enables UART hardware flow control, CTS and RTS lines.
@@ -230,9 +370,11 @@ typedef struct {
**/
UINT8 SerialIoDebugUartNumber;
-/** Offset 0x0185 - Reserved
+/** Offset 0x0185 - Serial IO UART DBG2 table
+ Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b>
+ 1: Enable.
**/
- UINT8 Reserved6[7];
+ UINT8 SerialIoUartDbg2[7];
/** Offset 0x018C - I2Cn Device Mode
Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available
@@ -252,9 +394,16 @@ typedef struct {
**/
UINT32 PchSerialIoI2cSclPinMux[8];
-/** Offset 0x01D4 - Reserved
+/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination
+ respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on.
+**/
+ UINT8 PchSerialIoI2cPadsTermination[8];
+
+/** Offset 0x01DC - Reserved
**/
- UINT8 Reserved7[192];
+ UINT8 Reserved6[184];
/** Offset 0x0294 - USB Per Port HS Preemphasis Bias
USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
@@ -304,9 +453,37 @@ typedef struct {
**/
UINT8 Usb3HsioTxDownscaleAmp[10];
-/** Offset 0x02FC - Reserved
+/** Offset 0x02FC
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10];
+
+/** Offset 0x0306
+**/
+ UINT8 PchUsb3HsioFilterSelNEnable[10];
+
+/** Offset 0x0310
**/
- UINT8 Reserved8[80];
+ UINT8 PchUsb3HsioFilterSelPEnable[10];
+
+/** Offset 0x031A
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10];
+
+/** Offset 0x0324
+**/
+ UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10];
+
+/** Offset 0x032E
+**/
+ UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10];
+
+/** Offset 0x0338
+**/
+ UINT8 PchUsb3HsioFilterSelN[10];
+
+/** Offset 0x0342
+**/
+ UINT8 PchUsb3HsioFilterSelP[10];
/** Offset 0x034C - Enable LAN
Enable/disable LAN controller.
@@ -316,7 +493,7 @@ typedef struct {
/** Offset 0x034D - Reserved
**/
- UINT8 Reserved9[11];
+ UINT8 Reserved7[11];
/** Offset 0x0358 - PCIe PTM enable/disable
Enable/disable Precision Time Measurement for PCIE Root Ports.
@@ -325,7 +502,36 @@ typedef struct {
/** Offset 0x0370 - Reserved
**/
- UINT8 Reserved10[58];
+ UINT8 Reserved8[48];
+
+/** Offset 0x03A0 - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x03A1 - Reserved
+**/
+ UINT8 Reserved9[3];
+
+/** Offset 0x03A4 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x03A9 - PCH SATA use RST Legacy OROM
+ Use PCH SATA RST Legacy OROM when CSM is Enabled
+ $EN_DIS
+**/
+ UINT8 SataRstLegacyOrom;
/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states
Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
@@ -337,9 +543,15 @@ typedef struct {
**/
UINT8 PchFivrExtV1p05RailSupportedVoltageStates;
-/** Offset 0x03AC - Reserved
+/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...)
**/
- UINT8 Reserved11[3];
+ UINT16 PchFivrExtV1p05RailVoltage;
+
+/** Offset 0x03AE - External V1P05 Icc Max Value
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtV1p05RailIccMax;
/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states
Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5
@@ -353,7 +565,23 @@ typedef struct {
/** Offset 0x03B1 - Reserved
**/
- UINT8 Reserved12[5];
+ UINT8 Reserved10;
+
+/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states
+ Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420
+**/
+ UINT16 PchFivrExtVnnRailVoltage;
+
+/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 200mA
+**/
+ UINT8 PchFivrExtVnnRailIccMax;
+
+/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in
+ Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5
+**/
+ UINT8 PchFivrExtVnnRailSxEnabledStates;
/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states
Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments
@@ -361,9 +589,11 @@ typedef struct {
**/
UINT16 PchFivrExtVnnRailSxVoltage;
-/** Offset 0x03B8 - Reserved
+/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 200mA
**/
- UINT8 Reserved13;
+ UINT8 PchFivrExtVnnRailSxIccMax;
/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage
This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
@@ -377,9 +607,11 @@ typedef struct {
**/
UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime;
-/** Offset 0x03BB - Reserved
+/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage
+ This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX
+ to retention mode voltage.
**/
- UINT8 Reserved14;
+ UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime;
/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage
This field has 1us resolution. When value is 0 Transition to 0V is disabled.
@@ -388,7 +620,45 @@ typedef struct {
/** Offset 0x03BE - Reserved
**/
- UINT8 Reserved15[20];
+ UINT8 Reserved11[2];
+
+/** Offset 0x03C0 - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x03C4 - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x03C5 - Reserved
+**/
+ UINT8 Reserved12[3];
+
+/** Offset 0x03C8 - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x03CC - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x03D0 - FIVR Dynamic Power Management
+ Enable/Disable FIVR Dynamic Power Management.
+ $EN_DIS
+**/
+ UINT8 PchFivrDynPm;
+
+/** Offset 0x03D1 - Reserved
+**/
+ UINT8 Reserved13;
/** Offset 0x03D2 - External V1P05 Icc Max Value
Granularity of this setting is 1mA and maximal possible value is 500mA
@@ -397,7 +667,7 @@ typedef struct {
/** Offset 0x03D4 - Reserved
**/
- UINT8 Reserved16[16];
+ UINT8 Reserved14[16];
/** Offset 0x03E4 - CNVi Configuration
This option allows for automatic detection of Connectivity Solution. [Auto Detection]
@@ -420,7 +690,7 @@ typedef struct {
/** Offset 0x03E7 - Reserved
**/
- UINT8 Reserved17;
+ UINT8 Reserved15;
/** Offset 0x03E8 - CNVi RF_RESET pin muxing
Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default)
@@ -435,9 +705,42 @@ typedef struct {
**/
UINT32 CnviClkreqPinMux;
-/** Offset 0x03F0 - Reserved
+/** Offset 0x03F0 - Enable Host C10 reporting through eSPI
+ Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire.
+ $EN_DIS
**/
- UINT8 Reserved18[14];
+ UINT8 PchEspiHostC10ReportEnable;
+
+/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PmcUsb2PhySusPgEnable;
+
+/** Offset 0x03F2 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x03F3 - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x03F4 - Reserved
+**/
+ UINT8 Reserved16[2];
+
+/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config
+ Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset,
+ 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte
+ for each port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlpResetConfig[8];
/** Offset 0x03FE - HECI3 state
The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
@@ -446,15 +749,140 @@ typedef struct {
**/
UINT8 Heci3Enabled;
-/** Offset 0x03FF - Reserved
+/** Offset 0x03FF - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x0400 - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x0401 - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x0402 - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x0403 - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 WatchDogEnabled;
+
+/** Offset 0x0404 - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x0405 - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events. Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x0406 - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx.
+ Setting is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x0407 - Reserved
+**/
+ UINT8 Reserved17;
+
+/** Offset 0x0408 - OS Timer
+ 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x040A - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0.
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x040C - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x040D - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting
+ is invalid if AmtEnabled is 0.
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x040E - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx.
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x040F - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x043F - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x0457 - Reserved
+**/
+ UINT8 Reserved18;
+
+/** Offset 0x0458 - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x0489 - Reserved
+**/
+ UINT8 Reserved19[2];
+
+/** Offset 0x048B - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
**/
- UINT8 Reserved19[141];
+ UINT8 PavpEnable;
/** Offset 0x048C - CdClock Frequency selection
0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2:
- 312 Mhz, 3: 552 Mhz, 4: 556.8 Mhz, 5: 648 Mhz, 6: 652.8 Mhz
+ 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz,
- 3: 552 Mhz, 4: 556.8 Mhz, 5: 648 Mhz, 6: 652.8 Mhz
+ 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz
**/
UINT8 CdClock;
@@ -471,9 +899,11 @@ typedef struct {
**/
UINT8 D3HotEnable;
-/** Offset 0x048F - Reserved
+/** Offset 0x048F - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
**/
- UINT8 Reserved20;
+ UINT8 GnaEnable;
/** Offset 0x0490 - TypeC port GPIO setting
GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined
@@ -482,9 +912,10 @@ typedef struct {
**/
UINT32 IomTypeCPortPadCfg[8];
-/** Offset 0x04B0 - Reserved
+/** Offset 0x04B0 - CPU USB3 Port Over Current Pin
+ Describe the specific over current pin number of USBC Port N.
**/
- UINT8 Reserved21[8];
+ UINT8 CpuUsb3OverCurrentPin[8];
/** Offset 0x04B8 - Enable D3 Cold in TCSS
This policy will enable/disable D3 cold support in IOM
@@ -494,7 +925,7 @@ typedef struct {
/** Offset 0x04B9 - Reserved
**/
- UINT8 Reserved22[8];
+ UINT8 Reserved20[8];
/** Offset 0x04C1 - Enable VMD controller
Enable/disable to VMD controller.0: Disable(Default); 1: Enable
@@ -502,9 +933,69 @@ typedef struct {
**/
UINT8 VmdEnable;
-/** Offset 0x04C2 - Reserved
+/** Offset 0x04C2 - Enable VMD portA Support
+ Enable/disable to VMD portA Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortA;
+
+/** Offset 0x04C3 - Enable VMD portB Support
+ Enable/disable to VMD portB Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortB;
+
+/** Offset 0x04C4 - Enable VMD portC Support
+ Enable/disable to VMD portC Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortC;
+
+/** Offset 0x04C5 - Enable VMD portD Support
+ Enable/disable to VMD portD Support.
+ $EN_DIS
+**/
+ UINT8 VmdPortD;
+
+/** Offset 0x04C6 - Reserved
+**/
+ UINT8 Reserved21;
+
+/** Offset 0x04C7 - VMD Config Bar Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default)
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
**/
- UINT8 Reserved23[12];
+ UINT8 VmdCfgBarAttr;
+
+/** Offset 0x04C8 - Reserved
+**/
+ UINT8 Reserved22;
+
+/** Offset 0x04C9 - VMD Mem Bar1 Attributes
+ 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar1Attr;
+
+/** Offset 0x04CA - Reserved
+**/
+ UINT8 Reserved23;
+
+/** Offset 0x04CB - VMD Mem Bar2 Attributes
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
+ 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
+**/
+ UINT8 VmdMemBar2Attr;
+
+/** Offset 0x04CC - Enable/Disable PMC-PD Solution
+ This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution
+ $EN_DIS
+**/
+ UINT8 PmcPdEnable;
+
+/** Offset 0x04CD - Reserved
+**/
+ UINT8 Reserved24;
/** Offset 0x04CE - TCSS Aux Orientation Override Enable
Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
@@ -516,9 +1007,16 @@ typedef struct {
**/
UINT16 TcssHslOri;
-/** Offset 0x04D2 - Reserved
+/** Offset 0x04D2 - USB override in IOM
+ This policy will enable/disable USB Connect override in IOM
+ $EN_DIS
+**/
+ UINT8 UsbOverride;
+
+/** Offset 0x04D3 - TCSS USB Port Enable
+ Bits 0, 1, ... max Type C port control enables
**/
- UINT8 Reserved24[2];
+ UINT8 UsbTcPortEn;
/** Offset 0x04D4 - ITBT Root Port Enable
ITBT Root Port Enable, 0:Disable, 1:Enable
@@ -526,9 +1024,11 @@ typedef struct {
**/
UINT8 ITbtPcieRootPortEn[4];
-/** Offset 0x04D8 - Reserved
+/** Offset 0x04D8 - ITBTForcePowerOn Timeout value
+ ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000.
+ 100 = 100 ms.
**/
- UINT8 Reserved25[2];
+ UINT16 ITbtForcePowerOnTimeoutInMs;
/** Offset 0x04DA - ITbtConnectTopology Timeout value
ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range
@@ -536,9 +1036,26 @@ typedef struct {
**/
UINT16 ITbtConnectTopologyTimeoutInMs;
-/** Offset 0x04DC - Reserved
+/** Offset 0x04DC - VCCST request for IOM
+ This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5
+ $EN_DIS
+**/
+ UINT8 VccSt;
+
+/** Offset 0x04DD - Reserved
**/
- UINT8 Reserved26[7];
+ UINT8 Reserved25;
+
+/** Offset 0x04DE - ITBT DMA LTR
+ TCSS DMA1, DMA2 LTR value
+**/
+ UINT16 ITbtDmaLtr[2];
+
+/** Offset 0x04E2 - Enable/Disable CrashLog
+ Enable(Default): Enable CPU CrashLog, Disable: Disable CPU CrashLog
+ $EN_DIS
+**/
+ UINT8 CpuCrashLogEnable;
/** Offset 0x04E3 - Enable/Disable PTM
This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports
@@ -546,9 +1063,197 @@ typedef struct {
**/
UINT8 PtmEnabled[4];
-/** Offset 0x04E7 - Reserved
+/** Offset 0x04E7 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 SaPcieItbtRpLtrEnable[4];
+
+/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x04F3 - Reserved
+**/
+ UINT8 Reserved26;
+
+/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
**/
- UINT8 Reserved27[194];
+ UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x050C - Force LTR Override
+ Force LTR Override.
+**/
+ UINT8 SaPcieItbtRpForceLtrOverride[4];
+
+/** Offset 0x0510 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 SaPcieItbtRpLtrConfigLock[4];
+
+/** Offset 0x0514 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x0515 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x051A - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x051F - Reserved
+**/
+ UINT8 Reserved27;
+
+/** Offset 0x0520 - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope[5];
+
+/** Offset 0x052A - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT16 ImonOffset[5];
+
+/** Offset 0x0534 - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x0539 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x053E - Thermal Design Current time window
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 -
+ 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index
+**/
+ UINT8 TdcTimeWindow[5];
+
+/** Offset 0x0543 - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x0548 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x0549
+**/
+ UINT8 PsysOffset;
+
+/** Offset 0x054A - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x054B - Reserved
+**/
+ UINT8 Reserved28[10];
+
+/** Offset 0x0555 - Enable multi phases silicon initial
+ A switch to determine MultiPhaseSiInit will be executed or not
+ $EN_DIS
+**/
+ UINT8 EnableMultiPhaseSiliconInit;
+
+/** Offset 0x0556 - Reserved
+**/
+ UINT8 Reserved29[10];
+
+/** Offset 0x0560 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x056A - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x0574 - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold[5];
+
+/** Offset 0x057E - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x0588 - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x0592 - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x059C - VR Voltage Limit
+ PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV.
+**/
+ UINT16 VrVoltageLimit[5];
+
+/** Offset 0x05A6 - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x05A7 - Reserved
+**/
+ UINT8 Reserved30;
+
+/** Offset 0x05A8 - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
/** Offset 0x05A9 - Skip Multi-Processor Initialization
When this is skipped, boot loader must initialize processors before SilicionInit
@@ -557,9 +1262,28 @@ typedef struct {
**/
UINT8 SkipMpInit;
-/** Offset 0x05AA - Reserved
+/** Offset 0x05AA - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x05AC - FIVR RFI Spread Spectrum
+ Set the Spread Spectrum Range. <b>1.5%</b>; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%,
+ 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1%
+ = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44.
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x05AD - Reserved
+**/
+ UINT8 Reserved31[3];
+
+/** Offset 0x05B0 - CpuBistData
+ Pointer CPU BIST Data
**/
- UINT8 Reserved28[10];
+ UINT32 CpuBistData;
/** Offset 0x05B4 - CpuMpPpi
<b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI.
@@ -568,9 +1292,55 @@ typedef struct {
**/
UINT32 CpuMpPpi;
-/** Offset 0x05B8 - Reserved
+/** Offset 0x05B8 - CpuMpHob
+ <b>@deprecated</b> This is not needed in current version of FSP.
**/
- UINT8 Reserved29[46];
+ UINT32 CpuMpHob;
+
+/** Offset 0x05BC - Reserved
+**/
+ UINT8 Reserved32[16];
+
+/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number
+ Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
+ flag is set) for PPIN Support
+ 0: Disable, 1: Enable, 2: Auto
+**/
+ UINT8 PpinSupport;
+
+/** Offset 0x05CD - Enable or Disable Minimum Voltage Override
+ Enable or disable Minimum Voltage overrides ; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 EnableMinVoltageOverride;
+
+/** Offset 0x05CE - Min Voltage for Runtime
+ PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride
+ = 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageRuntime;
+
+/** Offset 0x05D0 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x05D8 - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x05DC - Min Voltage for C8
+ PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride =
+ 1. Range 0 to 1999mV. <b> 0: 0mV </b>
+**/
+ UINT16 MinVoltageC8;
+
+/** Offset 0x05DE - Reserved
+**/
+ UINT8 Reserved33[8];
/** Offset 0x05E6 - Enable Power Optimizer
Enable DMI Power Optimizer on PCH side.
@@ -578,18 +1348,62 @@ typedef struct {
**/
UINT8 PchPwrOptEnable;
-/** Offset 0x05E7 - Reserved
+/** Offset 0x05E7 - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x05EC - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x05F1 - Reserved
+**/
+ UINT8 Reserved34;
+
+/** Offset 0x05F2 - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x05FC - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x0606 - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x0607 - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
**/
- UINT8 Reserved30[36];
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x0608 - Reserved
+**/
+ UINT8 Reserved35[3];
/** Offset 0x060B - Enable PCH ISH SPI Cs0 pins assigned
Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable.
**/
UINT8 PchIshSpiCs0Enable[1];
-/** Offset 0x060C - Reserved
+/** Offset 0x060C - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x060D - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
**/
- UINT8 Reserved31[2];
+ UINT8 PchIoApicId;
/** Offset 0x060E - Enable PCH ISH SPI pins assigned
Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable.
@@ -611,9 +1425,17 @@ typedef struct {
**/
UINT8 PchIshGpEnable[8];
-/** Offset 0x061C - Reserved
+/** Offset 0x061C - PCH ISH PDT Unlock Msg
+ 0: False; 1: True.
+ $EN_DIS
**/
- UINT8 Reserved32[2];
+ UINT8 PchIshPdtUnlock;
+
+/** Offset 0x061D - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
/** Offset 0x061E - Enable LOCKDOWN BIOS LOCK
Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
@@ -622,9 +1444,15 @@ typedef struct {
**/
UINT8 PchLockDownBiosLock;
-/** Offset 0x061F - Reserved
+/** Offset 0x061F - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0620 - Reserved
**/
- UINT8 Reserved33[2];
+ UINT8 Reserved36;
/** Offset 0x0621 - RTC Cmos Memory Lock
Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
@@ -643,9 +1471,10 @@ typedef struct {
**/
UINT8 PcieRpPmSci[24];
-/** Offset 0x0652 - Reserved
+/** Offset 0x0652 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
**/
- UINT8 Reserved34[24];
+ UINT8 PcieRpTransmitterHalfSwing[24];
/** Offset 0x066A - Enable PCIE RP Clk Req Detect
Probe CLKREQ# signal before enabling CLKREQ# based power management.
@@ -657,9 +1486,40 @@ typedef struct {
**/
UINT8 PcieRpAdvancedErrorReporting[24];
-/** Offset 0x069A - Reserved
+/** Offset 0x069A - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[24];
+
+/** Offset 0x06B2 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x06CA - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x06E2 - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x06FA - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x0712 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
**/
- UINT8 Reserved35[168];
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x072A - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
/** Offset 0x0742 - PCIE RP Max Payload
Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
@@ -674,7 +1534,7 @@ typedef struct {
/** Offset 0x075B - Reserved
**/
- UINT8 Reserved36[5];
+ UINT8 Reserved37[5];
/** Offset 0x0760 - Touch Host Controller Port 1 Assignment
Assign THC Port 1
@@ -684,7 +1544,23 @@ typedef struct {
/** Offset 0x0761 - Reserved
**/
- UINT8 Reserved37[79];
+ UINT8 Reserved38[7];
+
+/** Offset 0x0768 - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x0780 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x0798 - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
/** Offset 0x07B0 - PCIE RP Aspm
The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
@@ -703,9 +1579,66 @@ typedef struct {
**/
UINT8 PcieRpLtrEnable[24];
-/** Offset 0x07F8 - Reserved
+/** Offset 0x07F8 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
**/
- UINT8 Reserved38[79];
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x0810 - Reserved
+**/
+ UINT8 Reserved39[45];
+
+/** Offset 0x083D - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x083E - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x083F - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x0840 - Reserved
+**/
+ UINT8 Reserved40[2];
+
+/** Offset 0x0842 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x0843 - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x0844 - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x0845 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x0846 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
/** Offset 0x0847 - PCH Pm WoW lan Enable
Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
@@ -726,9 +1659,97 @@ typedef struct {
**/
UINT8 PchPmLanWakeFromDeepSx;
-/** Offset 0x084A - Reserved
+/** Offset 0x084A - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x084B - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x084C - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x084D - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x084E - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x084F - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x0850 - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x0851 - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x0852 - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x0853 - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0854 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0855 - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0856 - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x0857 - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
**/
- UINT8 Reserved39[16];
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x0858 - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x0859 - PCH Legacy IO Low Latency Enable
+ Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable
+ $EN_DIS
+**/
+ UINT8 PchLegacyIoLowLatency;
/** Offset 0x085A - PCH Sata Pwr Opt Enable
SATA Power Optimizer on PCH side.
@@ -736,9 +1757,41 @@ typedef struct {
**/
UINT8 SataPwrOptEnable;
-/** Offset 0x085B - Reserved
+/** Offset 0x085B - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x085C - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x085D - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x0865 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x086D - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x0875 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x087D - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
**/
- UINT8 Reserved40[42];
+ UINT8 SataPortsSolidStateDrive[8];
/** Offset 0x0885 - Enable SATA Port Enable Dito Config
Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
@@ -759,9 +1812,287 @@ typedef struct {
**/
UINT16 SataPortsDitoVal[8];
-/** Offset 0x08A6 - Reserved
+/** Offset 0x08A6 - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x08AE - PCH Sata Rst Raid Alternate Id
+ Enable RAID Alternate ID.
+ $EN_DIS
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x08AF - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x08B0 - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x08B1 - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x08B2 - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x08B3 - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x08B4 - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x08B5 - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x08B6 - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x08B7 - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x08B8 - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x08B9 - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
**/
- UINT8 Reserved42[72];
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x08BA - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x08BD - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x08C0 - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x08C3 - UFS enable/disable
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+ $EN_DIS
+**/
+ UINT8 UfsEnable[2];
+
+/** Offset 0x08C5 - Reserved
+**/
+ UINT8 Reserved42;
+
+/** Offset 0x08C6 - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x08C8 - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x08CA - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x08CC - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x08CD - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x08CE - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x08CF - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x08D0 - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x08D1 - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x08D2 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x08D3 - Thermal Sensor 0 Target Width
+ Thermal Sensor 0 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x08D4 - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x08D5 - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x08D6 - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x08D7 - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x08D8 - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x08D9 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x08DA - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x08DB - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x08DC - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x08DD - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x08DE - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x08DF - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x08E0 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x08E1 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x08E2 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x08E3 - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x08E4 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x08E5 - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x08E7 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x08E9 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x08EB - Reserved
+**/
+ UINT8 Reserved43;
+
+/** Offset 0x08EC - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
/** Offset 0x08EE - USB2 Port Over Current Pin
Describe the specific over current pin number of USB 2.0 Port N.
@@ -773,9 +2104,30 @@ typedef struct {
**/
UINT8 Usb3OverCurrentPin[10];
-/** Offset 0x0908 - Reserved
+/** Offset 0x0908 - Enable xHCI LTR override
+ Enables override of recommended LTR values for xHCI
+ $EN_DIS
+**/
+ UINT8 PchUsbLtrOverrideEnable;
+
+/** Offset 0x0909 - Reserved
+**/
+ UINT8 Reserved44[3];
+
+/** Offset 0x090C - xHCI High Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrHighIdleTimeOverride;
+
+/** Offset 0x0910 - xHCI Medium Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting
+**/
+ UINT32 PchUsbLtrMediumIdleTimeOverride;
+
+/** Offset 0x0914 - xHCI Low Idle Time LTR override
+ Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting
**/
- UINT8 Reserved43[16];
+ UINT32 PchUsbLtrLowIdleTimeOverride;
/** Offset 0x0918 - Enable 8254 Static Clock Gating
Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
@@ -793,9 +2145,25 @@ typedef struct {
**/
UINT8 Enable8254ClockGatingOnS3;
-/** Offset 0x091A - Reserved
+/** Offset 0x091A - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
**/
- UINT8 Reserved44[3];
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x091B - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x091C - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
/** Offset 0x091D - Hybrid Storage Detection and Configuration Mode
Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration.
@@ -806,16 +2174,140 @@ typedef struct {
/** Offset 0x091E - Reserved
**/
- UINT8 Reserved45[96];
+ UINT8 Reserved45[2];
+
+/** Offset 0x0920 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0940 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x0944 - Reserved
+**/
+ UINT8 Reserved46[4];
+
+/** Offset 0x0948 - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0950 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x0958 - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x0959 - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x095A - Reserved
+**/
+ UINT8 Reserved47[6];
+
+/** Offset 0x0960 - SgxEpoch0
+ SgxEpoch0 default values
+**/
+ UINT64 SgxEpoch0;
+
+/** Offset 0x0968 - SgxEpoch1
+ SgxEpoch1 default values
+**/
+ UINT64 SgxEpoch1;
+
+/** Offset 0x0970 - SgxSinitNvsData
+ SgxSinitNvsData default values
+**/
+ UINT8 SgxSinitNvsData;
+
+/** Offset 0x0971 - Si Config CSM Flag.
+ Platform specific common policies that used by several silicon components. CSM status flag.
+ $EN_DIS
+**/
+ UINT8 SiCsmFlag;
+
+/** Offset 0x0972 - Reserved
+**/
+ UINT8 Reserved48[6];
+
+/** Offset 0x0978 - SVID SDID table Poniter.
+ The address of the table of SVID SDID to customize each SVID SDID entry. This is
+ only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x097C - Number of ssid table.
+ SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr.
+ This is only valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiNumberOfSsidTableEntry;
/** Offset 0x097E - USB2 Port Reset Message Enable
0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message
**/
UINT8 PortResetMessageEnable[16];
-/** Offset 0x098E - Reserved
+/** Offset 0x098E - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x098F - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x0990 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
**/
- UINT8 Reserved46[322];
+ UINT8 PsOnEnable;
+
+/** Offset 0x0991 - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x0992 - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x0993 - PchDmiCwbEnable
+ Central Write Buffer feature configurable and enabled by default
+ $EN_DIS
+**/
+ UINT8 PchDmiCwbEnable;
+
+/** Offset 0x0994 - OS IDLE Mode Enable
+ Enable/Disable OS Idle Mode
+ $EN_DIS
+**/
+ UINT8 PmcOsIdleEnable;
+
+/** Offset 0x0995 - Reserved
+**/
+ UINT8 Reserved49[315];
/** Offset 0x0AD0 - RpPtmBytes
**/
@@ -823,7 +2315,19 @@ typedef struct {
/** Offset 0x0AD4 - Reserved
**/
- UINT8 Reserved47[36];
+ UINT8 Reserved50[16];
+
+/** Offset 0x0AE4 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTranEnable[10];
+
+/** Offset 0x0AEE - USB 3.0 TX Output Unique Transition Bit Scale for rate 3
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default
+ = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate3UniqTran[10];
/** Offset 0x0AF8 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2
Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each
@@ -837,9 +2341,61 @@ typedef struct {
**/
UINT8 Usb3HsioTxRate2UniqTran[10];
-/** Offset 0x0B0C - Reserved
+/** Offset 0x0B0C - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTranEnable[10];
+
+/** Offset 0x0B16 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate1UniqTran[10];
+
+/** Offset 0x0B20 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0
+ Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each
+ value in array can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTranEnable[10];
+
+/** Offset 0x0B2A - USB 3.0 TX Output Unique Transition Bit Scale for rate 0
+ USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24],
+ <b>Default = 4Ch</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxRate0UniqTran[10];
+
+/** Offset 0x0B34 - Skip PAM regsiter lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x0B35 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x0B36 - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x0B37 - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
**/
- UINT8 Reserved48[45];
+ UINT8 PmSupport;
+
+/** Offset 0x0B38 - Enable/Disable CdynmaxClamp
+ Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
/** Offset 0x0B39 - GT Frequency Limit
0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
@@ -855,9 +2411,103 @@ typedef struct {
**/
UINT8 GtFreqMax;
-/** Offset 0x0B3A - Reserved
+/** Offset 0x0B3A - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
**/
- UINT8 Reserved49[31];
+ UINT8 DisableTurboGt;
+
+/** Offset 0x0B3B - Enable/Disable CdClock Init
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock if not initialized by Gfx PEIM
+ $EN_DIS
+**/
+ UINT8 SkipCdClockInit;
+
+/** Offset 0x0B3C - Reserved
+**/
+ UINT8 Reserved51[16];
+
+/** Offset 0x0B4C - 1-Core Ratio Limit
+ 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
+ to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x0B4D - 2-Core Ratio Limit
+ 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x0B4E - 3-Core Ratio Limit
+ 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x0B4F - 4-Core Ratio Limit
+ 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x0B50 - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x0B51 - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x0B52 - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
+ 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x0B53 - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x0B54 - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x0B55 - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x0B56 - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x0B57 - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x0B58 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable</b> ; 1:Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
/** Offset 0x0B59 - TCC Activation Offset
TCC Activation Offset. Offset from factory set TCC activation temperature at which
@@ -882,9 +2532,273 @@ typedef struct {
**/
UINT8 TccOffsetLock;
-/** Offset 0x0B5C - Reserved
+/** Offset 0x0B5C - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x0B5D - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x0B5E - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x0B5F - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x0B60 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x0B61 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x0B62 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x0B63 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x0B64 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x0B65 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x0B66 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x0B67 - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x0B68 - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x0B69 - PL1 timewindow
+ PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
+ , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x0B6A - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x0B6B - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x0B6C - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x0B6D - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
**/
- UINT8 Reserved50[46];
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x0B6E - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x0B6F - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x0B70 - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x0B71 - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x0B72 - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0B73 - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0B74 - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x0B75 - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0B76 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0B77 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0B78 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0B79 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0B7A - Reserved
+**/
+ UINT8 Reserved52;
+
+/** Offset 0x0B7B - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x0B7C - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x0B7D - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x0B7E - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x0B7F - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x0B80 - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x0B81 - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0B82 - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0B83 - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0B84 - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0B85 - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0B86 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0B87 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0B88 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0B89 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
/** Offset 0x0B8A - TimeUnit for C-State Latency Control5
TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
@@ -892,9 +2806,107 @@ typedef struct {
**/
UINT8 CstateLatencyControl5TimeUnit;
-/** Offset 0x0B8B - Reserved
+/** Offset 0x0B8B - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7:
+ No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x0B8C - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x0B8D - Configuration for boot TDP selection
+ Deprecated. Move to premem.
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x0B8E - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x0B8F - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0BB7 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0BC7 - Reserved
+**/
+ UINT8 Reserved53;
+
+/** Offset 0x0BC8 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0BCA - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x0BCC - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x0BCE - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0BD0 - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF.
+ 0 is Auto.
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0BD4 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
**/
- UINT8 Reserved51[89];
+ UINT32 PowerLimit1;
+
+/** Offset 0x0BD8 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x0BDC - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0BE0 - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
/** Offset 0x0BE4 - Tcc Offset Time Window for RATL
Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
@@ -902,9 +2914,200 @@ typedef struct {
**/
UINT32 TccOffsetTimeWindowForRatl;
-/** Offset 0x0BE8 - Reserved
+/** Offset 0x0BE8 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x0BEC - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
**/
- UINT8 Reserved52[86];
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0C00 - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0C04 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0C08 - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x0C09 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0C0A - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x0C0B - 5-Core Ratio Limit
+ 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x0C0C - 6-Core Ratio Limit
+ 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x0C0D - 7-Core Ratio Limit
+ 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x0C0E - 8-Core Ratio Limit
+ 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
+ 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
+ to 1-Core Ratio Limit.Range is 0 to 83
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x0C0F - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x0C10 - Intel Turbo Boost Max Technology 3.0 Driver
+ @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x0C11 - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x0C12 - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x0C13 - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x0C14 - Maximum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x0C15 - Enable or Disable Per Core P State OS control
+ Enable or Disable Per Core P State OS control. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnablePerCorePState;
+
+/** Offset 0x0C16 - Enable or Disable HwP Autonomous Per Core P State OS control
+ Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; <b>1:
+ Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoPerCorePstate;
+
+/** Offset 0x0C17 - Enable or Disable HwP Autonomous EPP Grouping
+ Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableHwpAutoEppGrouping;
+
+/** Offset 0x0C18 - Enable or Disable EPB override over PECI
+ Enable or Disable EPB override over PECI. <b>0: Disable;</b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 EnableEpbPeciOverride;
+
+/** Offset 0x0C19 - Enable or Disable Fast MSR for IA32_HWP_REQUEST
+ Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable;<b> 1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnableFastMsrHwpReq;
+
+/** Offset 0x0C1A - Reserved
+**/
+ UINT8 Reserved54[17];
+
+/** Offset 0x0C2B - SgxSinitDataFromTpm
+ SgxSinitDataFromTpm default values
+**/
+ UINT8 SgxSinitDataFromTpm;
+
+/** Offset 0x0C2C - Reserved
+**/
+ UINT8 Reserved55[16];
+
+/** Offset 0x0C3C - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x0C3D - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
/** Offset 0x0C3E - Enable LOCKDOWN SMI
Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
@@ -924,9 +3127,12 @@ typedef struct {
**/
UINT8 PchUnlockGpioPads;
-/** Offset 0x0C41 - Reserved
+/** Offset 0x0C41 - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
**/
- UINT8 Reserved53;
+ UINT8 PchSbAccessUnlock;
/** Offset 0x0C42 - PCIE RP Ltr Max Snoop Latency
Latency Tolerance Reporting, Max Snoop Latency.
@@ -938,17 +3144,90 @@ typedef struct {
**/
UINT16 PcieRpLtrMaxNoSnoopLatency[24];
-/** Offset 0x0CA2 - Reserved
+/** Offset 0x0CA2 - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0CBA - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0CD2 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0D02 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x0D1A - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0D32 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0D62 - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x0D7A - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x0DAA - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x0DAB - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x0DAC - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
**/
- UINT8 Reserved54[269];
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x0DAD - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x0DAE - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
/** Offset 0x0DAF - LpmStateEnableMask
**/
UINT8 LpmStateEnableMask;
-/** Offset 0x0DB0 - Reserved
+/** Offset 0x0DB0 - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x0DB1 - Reserved
**/
- UINT8 Reserved55[232];
+ UINT8 Reserved56[231];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
@@ -965,7 +3244,7 @@ typedef struct {
/** Offset 0x0E98
**/
- UINT8 UnusedUpdSpace36[6];
+ UINT8 UnusedUpdSpace35[6];
/** Offset 0x0E9E
**/
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 13:23:35 +0000