diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/Ip4Config.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/Ip4Config.h | 182 |
1 files changed, 182 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/Ip4Config.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/Ip4Config.h new file mode 100644 index 0000000000..ece7efb668 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/Ip4Config.h @@ -0,0 +1,182 @@ +/** @file + This file provides a definition of the EFI IPv4 Configuration + Protocol. + +Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> +This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. +The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This Protocol is introduced in UEFI Specification 2.0. + +**/ +#ifndef __EFI_IP4CONFIG_PROTOCOL_H__ +#define __EFI_IP4CONFIG_PROTOCOL_H__ + +#include <Protocol/Ip4.h> + +#define EFI_IP4_CONFIG_PROTOCOL_GUID \ + { \ + 0x3b95aa31, 0x3793, 0x434b, {0x86, 0x67, 0xc8, 0x07, 0x08, 0x92, 0xe0, 0x5e } \ + } + +typedef struct _EFI_IP4_CONFIG_PROTOCOL EFI_IP4_CONFIG_PROTOCOL; + +#define IP4_CONFIG_VARIABLE_ATTRIBUTES \ + (EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS) + +/// +/// EFI_IP4_IPCONFIG_DATA contains the minimum IPv4 configuration data +/// that is needed to start basic network communication. The StationAddress +/// and SubnetMask must be a valid unicast IP address and subnet mask. +/// If RouteTableSize is not zero, then RouteTable contains a properly +/// formatted routing table for the StationAddress/SubnetMask, with the +/// last entry in the table being the default route. +/// +typedef struct { + /// + /// Default station IP address, stored in network byte order. + /// + EFI_IPv4_ADDRESS StationAddress; + /// + /// Default subnet mask, stored in network byte order. + /// + EFI_IPv4_ADDRESS SubnetMask; + /// + /// Number of entries in the following RouteTable. May be zero. + /// + UINT32 RouteTableSize; + /// + /// Default routing table data (stored in network byte order). + /// Ignored if RouteTableSize is zero. + /// + EFI_IP4_ROUTE_TABLE *RouteTable; +} EFI_IP4_IPCONFIG_DATA; + + +/** + Starts running the configuration policy for the EFI IPv4 Protocol driver. + + The Start() function is called to determine and to begin the platform + configuration policy by the EFI IPv4 Protocol driver. This determination may + be as simple as returning EFI_UNSUPPORTED if there is no EFI IPv4 Protocol + driver configuration policy. It may be as involved as loading some defaults + from nonvolatile storage, downloading dynamic data from a DHCP server, and + checking permissions with a site policy server. + Starting the configuration policy is just the beginning. It may finish almost + instantly or it may take several minutes before it fails to retrieve configuration + information from one or more servers. Once the policy is started, drivers + should use the DoneEvent parameter to determine when the configuration policy + has completed. EFI_IP4_CONFIG_PROTOCOL.GetData() must then be called to + determine if the configuration succeeded or failed. + Until the configuration completes successfully, EFI IPv4 Protocol driver instances + that are attempting to use default configurations must return EFI_NO_MAPPING. + Once the configuration is complete, the EFI IPv4 Configuration Protocol driver + signals DoneEvent. The configuration may need to be updated in the future. + Note that in this case the EFI IPv4 Configuration Protocol driver must signal + ReconfigEvent, and all EFI IPv4 Protocol driver instances that are using default + configurations must return EFI_NO_MAPPING until the configuration policy has + been rerun. + + @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance. + @param DoneEvent Event that will be signaled when the EFI IPv4 + Protocol driver configuration policy completes + execution. This event must be of type EVT_NOTIFY_SIGNAL. + @param ReconfigEvent Event that will be signaled when the EFI IPv4 + Protocol driver configuration needs to be updated. + This event must be of type EVT_NOTIFY_SIGNAL. + + @retval EFI_SUCCESS The configuration policy for the EFI IPv4 Protocol + driver is now running. + @retval EFI_INVALID_PARAMETER One or more of the following parameters is NULL: + This + DoneEvent + ReconfigEvent + @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. + @retval EFI_ALREADY_STARTED The configuration policy for the EFI IPv4 Protocol + driver was already started. + @retval EFI_DEVICE_ERROR An unexpected system error or network error occurred. + @retval EFI_UNSUPPORTED This interface does not support the EFI IPv4 Protocol + driver configuration. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG_START)( + IN EFI_IP4_CONFIG_PROTOCOL *This, + IN EFI_EVENT DoneEvent, + IN EFI_EVENT ReconfigEvent + ); + +/** + Stops running the configuration policy for the EFI IPv4 Protocol driver. + + The Stop() function stops the configuration policy for the EFI IPv4 Protocol driver. + All configuration data will be lost after calling Stop(). + + @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance. + + @retval EFI_SUCCESS The configuration policy for the EFI IPv4 Protocol + driver has been stopped. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_STARTED The configuration policy for the EFI IPv4 Protocol + driver was not started. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG_STOP)( + IN EFI_IP4_CONFIG_PROTOCOL *This + ); + +/** + Returns the default configuration data (if any) for the EFI IPv4 Protocol driver. + + The GetData() function returns the current configuration data for the EFI IPv4 + Protocol driver after the configuration policy has completed. + + @param This The pointer to the EFI_IP4_CONFIG_PROTOCOL instance. + @param IpConfigDataSize On input, the size of the IpConfigData buffer. + On output, the count of bytes that were written + into the IpConfigData buffer. + @param IpConfigData The pointer to the EFI IPv4 Configuration Protocol + driver configuration data structure. + Type EFI_IP4_IPCONFIG_DATA is defined in + "Related Definitions" below. + + @retval EFI_SUCCESS The EFI IPv4 Protocol driver configuration has been returned. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_NOT_STARTED The configuration policy for the EFI IPv4 Protocol + driver is not running. + @retval EFI_NOT_READY EFI IPv4 Protocol driver configuration is still running. + @retval EFI_ABORTED EFI IPv4 Protocol driver configuration could not complete. + @retval EFI_BUFFER_TOO_SMALL *IpConfigDataSize is smaller than the configuration + data buffer or IpConfigData is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_IP4_CONFIG_GET_DATA)( + IN EFI_IP4_CONFIG_PROTOCOL *This, + IN OUT UINTN *IpConfigDataSize, + OUT EFI_IP4_IPCONFIG_DATA *IpConfigData OPTIONAL + ); + +/// +/// The EFI_IP4_CONFIG_PROTOCOL driver performs platform-dependent and policy-dependent +/// configurations for the EFI IPv4 Protocol driver. +/// +struct _EFI_IP4_CONFIG_PROTOCOL { + EFI_IP4_CONFIG_START Start; + EFI_IP4_CONFIG_STOP Stop; + EFI_IP4_CONFIG_GET_DATA GetData; +}; + +extern EFI_GUID gEfiIp4ConfigProtocolGuid; + +#endif |