diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/FirmwareManagement.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/FirmwareManagement.h | 538 |
1 files changed, 538 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/FirmwareManagement.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/FirmwareManagement.h new file mode 100644 index 0000000000..e9a9e04ea0 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/FirmwareManagement.h @@ -0,0 +1,538 @@ +/** @file + UEFI Firmware Management Protocol definition + Firmware Management Protocol provides an abstraction for device to provide firmware + management support. The base requirements for managing device firmware images include + identifying firmware image revision level and programming the image into the device. + + GetImageInfo() is the only required function. GetImage(), SetImage(), + CheckImage(), GetPackageInfo(), and SetPackageInfo() shall return + EFI_UNSUPPORTED if not supported by the driver. + + Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR> + Copyright (c) 2013 - 2014, Hewlett-Packard Development Company, L.P.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This Protocol is introduced in UEFI Specification 2.3 + +**/ + +#ifndef __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__ +#define __EFI_FIRMWARE_MANAGEMENT_PROTOCOL_H__ + + +#define EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID \ + { \ + 0x86c77a67, 0xb97, 0x4633, {0xa1, 0x87, 0x49, 0x10, 0x4d, 0x6, 0x85, 0xc7 } \ + } + +typedef struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL EFI_FIRMWARE_MANAGEMENT_PROTOCOL; + +/// +/// EFI_FIRMWARE_IMAGE_DESCRIPTOR +/// +typedef struct { + /// + /// A unique number identifying the firmware image within the device. The number is + /// between 1 and DescriptorCount. + /// + UINT8 ImageIndex; + /// + /// A unique GUID identifying the firmware image type. + /// + EFI_GUID ImageTypeId; + /// + /// A unique number identifying the firmware image. + /// + UINT64 ImageId; + /// + /// A pointer to a null-terminated string representing the firmware image name. + /// + CHAR16 *ImageIdName; + /// + /// Identifies the version of the device firmware. The format is vendor specific and new + /// version must have a greater value than an old version. + /// + UINT32 Version; + /// + /// A pointer to a null-terminated string representing the firmware image version name. + /// + CHAR16 *VersionName; + /// + /// Size of the image in bytes. If size=0, then only ImageIndex and ImageTypeId are valid. + /// + UINTN Size; + /// + /// Image attributes that are supported by this device. See 'Image Attribute Definitions' + /// for possible returned values of this parameter. A value of 1 indicates the attribute is + /// supported and the current setting value is indicated in AttributesSetting. A + /// value of 0 indicates the attribute is not supported and the current setting value in + /// AttributesSetting is meaningless. + /// + UINT64 AttributesSupported; + /// + /// Image attributes. See 'Image Attribute Definitions' for possible returned values of + /// this parameter. + /// + UINT64 AttributesSetting; + /// + /// Image compatibilities. See 'Image Compatibility Definitions' for possible returned + /// values of this parameter. + /// + UINT64 Compatibilities; + /// + /// Describes the lowest ImageDescriptor version that the device will accept. Only + /// present in version 2 or higher. + /// + UINT32 LowestSupportedImageVersion; + /// + /// Describes the version that was last attempted to update. If no update attempted the + /// value will be 0. If the update attempted was improperly formatted and no version + /// number was available then the value will be zero. Only present in version 3 or higher. + UINT32 LastAttemptVersion; + /// + /// Describes the status that was last attempted to update. If no update has been attempted + /// the value will be LAST_ATTEMPT_STATUS_SUCCESS. Only present in version 3 or higher. + /// + UINT32 LastAttemptStatus; + /// + /// An optional number to identify the unique hardware instance within the system for + /// devices that may have multiple instances (Example: a plug in pci network card). This + /// number must be unique within the namespace of the ImageTypeId GUID and + /// ImageIndex. For FMP instances that have multiple descriptors for a single + /// hardware instance, all descriptors must have the same HardwareInstance value. + /// This number must be consistent between boots and should be based on some sort of + /// hardware identified unique id (serial number, etc) whenever possible. If a hardware + /// based number is not available the FMP provider may use some other characteristic + /// such as device path, bus/dev/function, slot num, etc for generating the + /// HardwareInstance. For implementations that will never have more than one + /// instance a zero can be used. A zero means the FMP provider is not able to determine a + /// unique hardware instance number or a hardware instance number is not needed. Only + /// present in version 3 or higher. + /// + UINT64 HardwareInstance; +} EFI_FIRMWARE_IMAGE_DESCRIPTOR; + + +// +// Image Attribute Definitions +// +/// +/// The attribute IMAGE_ATTRIBUTE_IMAGE_UPDATABLE indicates this device supports firmware +/// image update. +/// +#define IMAGE_ATTRIBUTE_IMAGE_UPDATABLE 0x0000000000000001 +/// +/// The attribute IMAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is required +/// for the new firmware image to take effect after a firmware update. The device is the device hosting +/// the firmware image. +/// +#define IMAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002 +/// +/// The attribute IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication is +/// required to perform the following image operations: GetImage(), SetImage(), and +/// CheckImage(). See 'Image Attribute - Authentication'. +/// +#define IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004 +/// +/// The attribute IMAGE_ATTRIBUTE_IN_USE indicates the current state of the firmware image. +/// This distinguishes firmware images in a device that supports redundant images. +/// +#define IMAGE_ATTRIBUTE_IN_USE 0x0000000000000008 +/// +/// The attribute IMAGE_ATTRIBUTE_UEFI_IMAGE indicates that this image is an EFI compatible image. +/// +#define IMAGE_ATTRIBUTE_UEFI_IMAGE 0x0000000000000010 + + +// +// Image Compatibility Definitions +// +/// Values from 0x0000000000000002 thru 0x000000000000FFFF are reserved for future assignments. +/// Values from 0x0000000000010000 thru 0xFFFFFFFFFFFFFFFF are used by firmware vendor for +/// compatibility check. +/// +#define IMAGE_COMPATIBILITY_CHECK_SUPPORTED 0x0000000000000001 + +/// +/// Descriptor Version exposed by GetImageInfo() function +/// +#define EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION 3 + + +/// +/// Image Attribute -Authentication Required +/// +typedef struct { + /// + /// It is included in the signature of AuthInfo. It is used to ensure freshness/no replay. + /// It is incremented during each firmware image operation. + /// + UINT64 MonotonicCount; + /// + /// Provides the authorization for the firmware image operations. It is a signature across + /// the image data and the Monotonic Count value. Caller uses the private key that is + /// associated with a public key that has been provisioned via the key exchange. + /// Because this is defined as a signature, WIN_CERTIFICATE_UEFI_GUID.CertType must + /// be EFI_CERT_TYPE_PKCS7_GUID. + /// + WIN_CERTIFICATE_UEFI_GUID AuthInfo; +} EFI_FIRMWARE_IMAGE_AUTHENTICATION; + + +// +// ImageUpdatable Definitions +// +/// +/// IMAGE_UPDATABLE_VALID indicates SetImage() will accept the new image and update the +/// device with the new image. The version of the new image could be higher or lower than +/// the current image. SetImage VendorCode is optional but can be used for vendor +/// specific action. +/// +#define IMAGE_UPDATABLE_VALID 0x0000000000000001 +/// +/// IMAGE_UPDATABLE_INVALID indicates SetImage() will reject the new image. No additional +/// information is provided for the rejection. +/// +#define IMAGE_UPDATABLE_INVALID 0x0000000000000002 +/// +/// IMAGE_UPDATABLE_INVALID_TYPE indicates SetImage() will reject the new image. The +/// rejection is due to the new image is not a firmware image recognized for this device. +/// +#define IMAGE_UPDATABLE_INVALID_TYPE 0x0000000000000004 +/// +/// IMAGE_UPDATABLE_INVALID_OLD indicates SetImage() will reject the new image. The +/// rejection is due to the new image version is older than the current firmware image +/// version in the device. The device firmware update policy does not support firmware +/// version downgrade. +/// +#define IMAGE_UPDATABLE_INVALID_OLD 0x0000000000000008 +/// +/// IMAGE_UPDATABLE_VALID_WITH_VENDOR_CODE indicates SetImage() will accept and update +/// the new image only if a correct VendorCode is provided or else image would be +/// rejected and SetImage will return appropriate error. +/// +#define IMAGE_UPDATABLE_VALID_WITH_VENDOR_CODE 0x0000000000000010 + + +// +// Package Attribute Definitions +// +/// +/// The attribute PACKAGE_ATTRIBUTE_VERSION_UPDATABLE indicates this device supports the +/// update of the firmware package version. +/// +#define PACKAGE_ATTRIBUTE_VERSION_UPDATABLE 0x0000000000000001 +/// +/// The attribute PACKAGE_ATTRIBUTE_RESET_REQUIRED indicates a reset of the device is +/// required for the new package info to take effect after an update. +/// +#define PACKAGE_ATTRIBUTE_RESET_REQUIRED 0x0000000000000002 +/// +/// The attribute PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED indicates authentication +/// is required to update the package info. +/// +#define PACKAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED 0x0000000000000004 + +/** + Callback function to report the process of the firmware updating. + + @param[in] Completion A value between 1 and 100 indicating the current completion + progress of the firmware update. Completion progress is + reported as from 1 to 100 percent. A value of 0 is used by + the driver to indicate that progress reporting is not supported. + + @retval EFI_SUCCESS SetImage() continues to do the callback if supported. + @retval other SetImage() discontinues the callback and completes + the update and returns. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS)( + IN UINTN Completion + ); + +/** + Returns information about the current firmware image(s) of the device. + + This function allows a copy of the current firmware image to be created and saved. + The saved copy could later been used, for example, in firmware image recovery or rollback. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[in, out] ImageInfoSize A pointer to the size, in bytes, of the ImageInfo buffer. + On input, this is the size of the buffer allocated by the caller. + On output, it is the size of the buffer returned by the firmware + if the buffer was large enough, or the size of the buffer needed + to contain the image(s) information if the buffer was too small. + @param[in, out] ImageInfo A pointer to the buffer in which firmware places the current image(s) + information. The information is an array of EFI_FIRMWARE_IMAGE_DESCRIPTORs. + @param[out] DescriptorVersion A pointer to the location in which firmware returns the version number + associated with the EFI_FIRMWARE_IMAGE_DESCRIPTOR. + @param[out] DescriptorCount A pointer to the location in which firmware returns the number of + descriptors or firmware images within this device. + @param[out] DescriptorSize A pointer to the location in which firmware returns the size, in bytes, + of an individual EFI_FIRMWARE_IMAGE_DESCRIPTOR. + @param[out] PackageVersion A version number that represents all the firmware images in the device. + The format is vendor specific and new version must have a greater value + than the old version. If PackageVersion is not supported, the value is + 0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version comparison + is to be performed using PackageVersionName. A value of 0xFFFFFFFD indicates + that package version update is in progress. + @param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing the + package version name. The buffer is allocated by this function with + AllocatePool(), and it is the caller's responsibility to free it with a call + to FreePool(). + + @retval EFI_SUCCESS The device was successfully updated with the new image. + @retval EFI_BUFFER_TOO_SMALL The ImageInfo buffer was too small. The current buffer size + needed to hold the image(s) information is returned in ImageInfoSize. + @retval EFI_INVALID_PARAMETER ImageInfoSize is NULL. + @retval EFI_DEVICE_ERROR Valid information could not be returned. Possible corrupted image. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + IN OUT UINTN *ImageInfoSize, + IN OUT EFI_FIRMWARE_IMAGE_DESCRIPTOR *ImageInfo, + OUT UINT32 *DescriptorVersion, + OUT UINT8 *DescriptorCount, + OUT UINTN *DescriptorSize, + OUT UINT32 *PackageVersion, + OUT CHAR16 **PackageVersionName + ); + +/** + Retrieves a copy of the current firmware image of the device. + + This function allows a copy of the current firmware image to be created and saved. + The saved copy could later been used, for example, in firmware image recovery or rollback. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[in] ImageIndex A unique number identifying the firmware image(s) within the device. + The number is between 1 and DescriptorCount. + @param[out] Image Points to the buffer where the current image is copied to. + @param[out] ImageSize On entry, points to the size of the buffer pointed to by Image, in bytes. + On return, points to the length of the image, in bytes. + + @retval EFI_SUCCESS The device was successfully updated with the new image. + @retval EFI_BUFFER_TOO_SMALL The buffer specified by ImageSize is too small to hold the + image. The current buffer size needed to hold the image is returned + in ImageSize. + @retval EFI_INVALID_PARAMETER The Image was NULL. + @retval EFI_NOT_FOUND The current image is not copied to the buffer. + @retval EFI_UNSUPPORTED The operation is not supported. + @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + IN UINT8 ImageIndex, + IN OUT VOID *Image, + IN OUT UINTN *ImageSize + ); + +/** + Updates the firmware image of the device. + + This function updates the hardware with the new firmware image. + This function returns EFI_UNSUPPORTED if the firmware image is not updatable. + If the firmware image is updatable, the function should perform the following minimal validations + before proceeding to do the firmware image update. + - Validate the image authentication if image has attribute + IMAGE_ATTRIBUTE_AUTHENTICATION_REQUIRED. The function returns + EFI_SECURITY_VIOLATION if the validation fails. + - Validate the image is a supported image for this device. The function returns EFI_ABORTED if + the image is unsupported. The function can optionally provide more detailed information on + why the image is not a supported image. + - Validate the data from VendorCode if not null. Image validation must be performed before + VendorCode data validation. VendorCode data is ignored or considered invalid if image + validation failed. The function returns EFI_ABORTED if the data is invalid. + + VendorCode enables vendor to implement vendor-specific firmware image update policy. Null if + the caller did not specify the policy or use the default policy. As an example, vendor can implement + a policy to allow an option to force a firmware image update when the abort reason is due to the new + firmware image version is older than the current firmware image version or bad image checksum. + Sensitive operations such as those wiping the entire firmware image and render the device to be + non-functional should be encoded in the image itself rather than passed with the VendorCode. + AbortReason enables vendor to have the option to provide a more detailed description of the abort + reason to the caller. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[in] ImageIndex A unique number identifying the firmware image(s) within the device. + The number is between 1 and DescriptorCount. + @param[in] Image Points to the new image. + @param[in] ImageSize Size of the new image in bytes. + @param[in] VendorCode This enables vendor to implement vendor-specific firmware image update policy. + Null indicates the caller did not specify the policy or use the default policy. + @param[in] Progress A function used by the driver to report the progress of the firmware update. + @param[out] AbortReason A pointer to a pointer to a null-terminated string providing more + details for the aborted operation. The buffer is allocated by this function + with AllocatePool(), and it is the caller's responsibility to free it with a + call to FreePool(). + + @retval EFI_SUCCESS The device was successfully updated with the new image. + @retval EFI_ABORTED The operation is aborted. + @retval EFI_INVALID_PARAMETER The Image was NULL. + @retval EFI_UNSUPPORTED The operation is not supported. + @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + IN UINT8 ImageIndex, + IN CONST VOID *Image, + IN UINTN ImageSize, + IN CONST VOID *VendorCode, + IN EFI_FIRMWARE_MANAGEMENT_UPDATE_IMAGE_PROGRESS Progress, + OUT CHAR16 **AbortReason + ); + +/** + Checks if the firmware image is valid for the device. + + This function allows firmware update application to validate the firmware image without + invoking the SetImage() first. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[in] ImageIndex A unique number identifying the firmware image(s) within the device. + The number is between 1 and DescriptorCount. + @param[in] Image Points to the new image. + @param[in] ImageSize Size of the new image in bytes. + @param[out] ImageUpdatable Indicates if the new image is valid for update. It also provides, + if available, additional information if the image is invalid. + + @retval EFI_SUCCESS The image was successfully checked. + @retval EFI_INVALID_PARAMETER The Image was NULL. + @retval EFI_UNSUPPORTED The operation is not supported. + @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + IN UINT8 ImageIndex, + IN CONST VOID *Image, + IN UINTN ImageSize, + OUT UINT32 *ImageUpdatable + ); + +/** + Returns information about the firmware package. + + This function returns package information. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[out] PackageVersion A version number that represents all the firmware images in the device. + The format is vendor specific and new version must have a greater value + than the old version. If PackageVersion is not supported, the value is + 0xFFFFFFFF. A value of 0xFFFFFFFE indicates that package version + comparison is to be performed using PackageVersionName. A value of + 0xFFFFFFFD indicates that package version update is in progress. + @param[out] PackageVersionName A pointer to a pointer to a null-terminated string representing + the package version name. The buffer is allocated by this function with + AllocatePool(), and it is the caller's responsibility to free it with a + call to FreePool(). + @param[out] PackageVersionNameMaxLen The maximum length of package version name if device supports update of + package version name. A value of 0 indicates the device does not support + update of package version name. Length is the number of Unicode characters, + including the terminating null character. + @param[out] AttributesSupported Package attributes that are supported by this device. See 'Package Attribute + Definitions' for possible returned values of this parameter. A value of 1 + indicates the attribute is supported and the current setting value is + indicated in AttributesSetting. A value of 0 indicates the attribute is not + supported and the current setting value in AttributesSetting is meaningless. + @param[out] AttributesSetting Package attributes. See 'Package Attribute Definitions' for possible returned + values of this parameter + + @retval EFI_SUCCESS The package information was successfully returned. + @retval EFI_UNSUPPORTED The operation is not supported. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + OUT UINT32 *PackageVersion, + OUT CHAR16 **PackageVersionName, + OUT UINT32 *PackageVersionNameMaxLen, + OUT UINT64 *AttributesSupported, + OUT UINT64 *AttributesSetting + ); + +/** + Updates information about the firmware package. + + This function updates package information. + This function returns EFI_UNSUPPORTED if the package information is not updatable. + VendorCode enables vendor to implement vendor-specific package information update policy. + Null if the caller did not specify this policy or use the default policy. + + @param[in] This A pointer to the EFI_FIRMWARE_MANAGEMENT_PROTOCOL instance. + @param[in] Image Points to the authentication image. + Null if authentication is not required. + @param[in] ImageSize Size of the authentication image in bytes. + 0 if authentication is not required. + @param[in] VendorCode This enables vendor to implement vendor-specific firmware + image update policy. + Null indicates the caller did not specify this policy or use + the default policy. + @param[in] PackageVersion The new package version. + @param[in] PackageVersionName A pointer to the new null-terminated Unicode string representing + the package version name. + The string length is equal to or less than the value returned in + PackageVersionNameMaxLen. + + @retval EFI_SUCCESS The device was successfully updated with the new package + information. + @retval EFI_INVALID_PARAMETER The PackageVersionName length is longer than the value + returned in PackageVersionNameMaxLen. + @retval EFI_UNSUPPORTED The operation is not supported. + @retval EFI_SECURITY_VIOLATIO The operation could not be performed due to an authentication failure. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO)( + IN EFI_FIRMWARE_MANAGEMENT_PROTOCOL *This, + IN CONST VOID *Image, + IN UINTN ImageSize, + IN CONST VOID *VendorCode, + IN UINT32 PackageVersion, + IN CONST CHAR16 *PackageVersionName + ); + +/// +/// EFI_FIRMWARE_MANAGEMENT_PROTOCOL +/// The protocol for managing firmware provides the following services. +/// - Get the attributes of the current firmware image. Attributes include revision level. +/// - Get a copy of the current firmware image. As an example, this service could be used by a +/// management application to facilitate a firmware roll-back. +/// - Program the device with a firmware image supplied by the user. +/// - Label all the firmware images within a device with a single version. +/// +struct _EFI_FIRMWARE_MANAGEMENT_PROTOCOL { + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE_INFO GetImageInfo; + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_IMAGE GetImage; + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_IMAGE SetImage; + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_CHECK_IMAGE CheckImage; + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GET_PACKAGE_INFO GetPackageInfo; + EFI_FIRMWARE_MANAGEMENT_PROTOCOL_SET_PACKAGE_INFO SetPackageInfo; +}; + +extern EFI_GUID gEfiFirmwareManagementProtocolGuid; + +#endif |