diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/BlockIoCrypto.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/BlockIoCrypto.h | 527 |
1 files changed, 527 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/BlockIoCrypto.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/BlockIoCrypto.h new file mode 100644 index 0000000000..ffac54b3b1 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Protocol/BlockIoCrypto.h @@ -0,0 +1,527 @@ +/** @file + The UEFI Inline Cryptographic Interface protocol provides services to abstract + access to inline cryptographic capabilities. + + Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __BLOCK_IO_CRYPTO_H__ +#define __BLOCK_IO_CRYPTO_H__ + +#include <Protocol/BlockIo.h> + +#define EFI_BLOCK_IO_CRYPTO_PROTOCOL_GUID \ + { \ + 0xa00490ba, 0x3f1a, 0x4b4c, {0xab, 0x90, 0x4f, 0xa9, 0x97, 0x26, 0xa1, 0xe8} \ + } + +typedef struct _EFI_BLOCK_IO_CRYPTO_PROTOCOL EFI_BLOCK_IO_CRYPTO_PROTOCOL; + +/// +/// The struct of Block I/O Crypto Token. +/// +typedef struct { + // + // If Event is NULL, then blocking I/O is performed. If Event is not NULL and + // non-blocking I/O is supported, then non-blocking I/O is performed, and + // Event will be signaled when the read request is completed and data was + // decrypted (when Index was specified). + // + EFI_EVENT Event; + // + // Defines whether or not the signaled event encountered an error. + // + EFI_STATUS TransactionStatus; +} EFI_BLOCK_IO_CRYPTO_TOKEN; + +typedef struct { + // + // GUID of the algorithm. + // + EFI_GUID Algorithm; + // + // Specifies KeySizein bits used with this Algorithm. + // + UINT64 KeySize; + // + // Specifies bitmask of block sizes supported by this algorithm. + // Bit j being set means that 2^j bytes crypto block size is supported. + // + UINT64 CryptoBlockSizeBitMask; +} EFI_BLOCK_IO_CRYPTO_CAPABILITY; + +/// +/// EFI_BLOCK_IO_CRYPTO_IV_INPUT structure is used as a common header in CryptoIvInput +/// parameters passed to the ReadExtended and WriteExtended methods for Inline +/// Cryptographic Interface. +/// Its purpose is to pass size of the entire CryptoIvInputparameter memory buffer to +/// the Inline Cryptographic Interface. +/// +typedef struct { + UINT64 InputSize; +} EFI_BLOCK_IO_CRYPTO_IV_INPUT; + +#define EFI_BLOCK_IO_CRYPTO_ALGO_GUID_AES_XTS \ + { \ + 0x2f87ba6a, 0x5c04, 0x4385, {0xa7, 0x80, 0xf3, 0xbf, 0x78, 0xa9, 0x7b, 0xec} \ + } + +extern EFI_GUID gEfiBlockIoCryptoAlgoAesXtsGuid; + +typedef struct { + EFI_BLOCK_IO_CRYPTO_IV_INPUT Header; + UINT64 CryptoBlockNumber; + UINT64 CryptoBlockByteSize; +} EFI_BLOCK_IO_CRYPTO_IV_INPUT_AES_XTS; + +#define EFI_BLOCK_IO_CRYPTO_ALGO_GUID_AES_CBC_MICROSOFT_BITLOCKER \ + { \ + 0x689e4c62, 0x70bf, 0x4cf3, {0x88, 0xbb, 0x33, 0xb3, 0x18, 0x26, 0x86, 0x70} \ + } + +extern EFI_GUID gEfiBlockIoCryptoAlgoAesCbcMsBitlockerGuid; + +typedef struct { + EFI_BLOCK_IO_CRYPTO_IV_INPUT Header; + UINT64 CryptoBlockByteOffset; + UINT64 CryptoBlockByteSize; +} EFI_BLOCK_IO_CRYPTO_IV_INPUT_AES_CBC_MICROSOFT_BITLOCKER; + +#define EFI_BLOCK_IO_CRYPTO_INDEX_ANY 0xFFFFFFFFFFFFFFFF + +typedef struct { + // + // Is inline cryptographic capability supported on this device. + // + BOOLEAN Supported; + // + // Maximum number of keys that can be configured at the same time. + // + UINT64 KeyCount; + // + // Number of supported capabilities. + // + UINT64 CapabilityCount; + // + // Array of supported capabilities. + // + EFI_BLOCK_IO_CRYPTO_CAPABILITY Capabilities[1]; +} EFI_BLOCK_IO_CRYPTO_CAPABILITIES; + +typedef struct { + // + // Configuration table index. A special Index EFI_BLOCK_IO_CRYPTO_INDEX_ANY can be + // used to set any available entry in the configuration table. + // + UINT64 Index; + // + // Identifies the owner of the configuration table entry. Entry can also be used + // with the Nil value to clear key from the configuration table index. + // + EFI_GUID KeyOwnerGuid; + // + // A supported capability to be used. The CryptoBlockSizeBitMask field of the + // structure should have only one bit set from the supported mask. + // + EFI_BLOCK_IO_CRYPTO_CAPABILITY Capability; + // + // Pointer to the key. The size of the key is defined by the KeySize field of + // the capability specified by the Capability parameter. + // + VOID *CryptoKey; +} EFI_BLOCK_IO_CRYPTO_CONFIGURATION_TABLE_ENTRY; + +typedef struct { + // + // Configuration table index. + // + UINT64 Index; + // + // Identifies the current owner of the entry. + // + EFI_GUID KeyOwnerGuid; + // + // The capability to be used. The CryptoBlockSizeBitMask field of the structure + // has only one bit set from the supported mask. + // + EFI_BLOCK_IO_CRYPTO_CAPABILITY Capability; +} EFI_BLOCK_IO_CRYPTO_RESPONSE_CONFIGURATION_ENTRY; + +/** + Reset the block device hardware. + + The Reset() function resets the block device hardware. + + As part of the initialization process, the firmware/device will make a quick but + reasonable attempt to verify that the device is functioning. + + If the ExtendedVerificationflag is TRUE the firmware may take an extended amount + of time to verify the device is operating on reset. Otherwise the reset operation + is to occur as quickly as possible. + + The hardware verification process is not defined by this specification and is left + up to the platform firmware or driver to implement. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in] ExtendedVerification Indicates that the driver may perform a more exhausive + verification operation of the device during reset. + + @retval EFI_SUCCESS The block device was reset. + @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could + not be reset. + @retval EFI_INVALID_PARAMETER This is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_RESET) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN BOOLEAN ExtendedVerification + ); + +/** + Get the capabilities of the underlying inline cryptographic interface. + + The GetCapabilities() function determines whether pre-OS controllable inline crypto + is supported by the system for the current disk and, if so, returns the capabilities + of the crypto engine. + + The caller is responsible for providing the Capabilities structure with a sufficient + number of entries. + + If the structure is too small, the EFI_BUFFER_TOO_SMALL error code is returned and the + CapabilityCount field contains the number of entries needed to contain the capabilities. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[out] Capabilities Pointer to the EFI_BLOCK_IO_CRYPTO_CAPABILITIES structure. + + @retval EFI_SUCCESS The ICI is ready for use. + @retval EFI_BUFFER_TOO_SMALL The Capabilities structure was too small. The number of + entries needed is returned in the CapabilityCount field + of the structure. + @retval EFI_NO_RESPONSE No response was received from the ICI. + @retval EFI_DEVICE_ERROR An error occurred when attempting to access the ICI. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER Capabilities is NULL. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_GET_CAPABILITIES) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + OUT EFI_BLOCK_IO_CRYPTO_CAPABILITIES *Capabilities + ); + +/** + Set the configuration of the underlying inline cryptographic interface. + + The SetConfiguration() function allows the user to set the current configuration of the + inline cryptographic interface and should be called before attempting any crypto operations. + + This configures the configuration table entries with algorithms, key sizes and keys. Each + configured entry can later be referred to by index at the time of storage transaction. + + The configuration table index will refer to the combination ofKeyOwnerGuid, Algorithm, and + CryptoKey. + + KeyOwnerGuid identifies the component taking ownership of the entry. It helps components to + identify their own entries, cooperate with other owner components, and avoid conflicts. This + Guid identifier is there to help coordination between cooperating components and not a security + or synchronization feature. The Nil GUID can be used by a component to release use of entry + owned. It is also used to identify potentially available entries (see GetConfiguration). + + CryptoKey specifies algorithm-specific key material to use within parameters of selected crypto + capability. + + This function is called infrequently typically once, on device start, before IO starts. It + can be called at later times in cases the number of keysused on the drive is higher than what + can be configured at a time or a new key has to be added. + + Components setting or changing an entry or entries for a given index or indices must ensure + that IO referencing affected indices is temporarily blocked (run-down) at the time of change. + + Indices parameters in each parameter table entry allow to set only a portion of the available + table entries in the crypto module anywhere from single entry to entire table supported. + + If corresponding table entry or entries being set are already in use by another owner the call + should be failed and none of the entries should be modified. The interface implementation must + enforce atomicity of this operation (should either succeed fully or fail completely without + modifying state). + + Note that components using GetConfiguration command to discover available entries should be + prepared that by the time of calling SetConfiguration the previously available entry may have + become occupied. Such components should be prepared to re-try the sequence of operations. + + Alternatively EFI_BLOCK_IO_CRYPTO_INDEX_ANY can be used to have the implementation discover + and allocate available,if any, indices atomically. + + An optional ResultingTable pointer can be provided by the caller to receive the newly configured + entries. The array provided by the caller must have at least ConfigurationCount of entries. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in] ConfigurationCount Number of entries being configured with this call. + @param[in] ConfigurationTable Pointer to a table used to populate the configuration table. + @param[out] ResultingTable Optional pointer to a table that receives the newly configured + entries. + + @retval EFI_SUCCESS The ICI is ready for use. + @retval EFI_NO_RESPONSE No response was received from the ICI. + @retval EFI_DEVICE_ERROR An error occurred when attempting to access the ICI. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER ConfigurationTable is NULL. + @retval EFI_INVALID_PARAMETER ConfigurationCount is 0. + @retval EFI_OUT_OF_RESOURCES Could not find the requested number of available entries in the + configuration table. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_SET_CONFIGURATION) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN UINT64 ConfigurationCount, + IN EFI_BLOCK_IO_CRYPTO_CONFIGURATION_TABLE_ENTRY *ConfigurationTable, + OUT EFI_BLOCK_IO_CRYPTO_RESPONSE_CONFIGURATION_ENTRY *ResultingTable OPTIONAL + ); + +/** + Get the configuration of the underlying inline cryptographic interface. + + The GetConfiguration() function allows the user to get the configuration of the inline + cryptographic interface. + + Retrieves, entirely or partially, the currently configured key table. Note that the keys + themselves are not retrieved, but rather just indices, owner GUIDs and capabilities. + + If fewer entries than specified by ConfigurationCount are returned, the Index field of the + unused entries is set to EFI_BLOCK_IO_CRYPTO_INDEX_ANY. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in] StartIndex Configuration table index at which to start the configuration + query. + @param[in] ConfigurationCount Number of entries to return in the response table. + @param[in] KeyOwnerGuid Optional parameter to filter response down to entries with a + given owner. A pointer to the Nil value can be used to return + available entries. Set to NULL when no owner filtering is required. + @param[out] ConfigurationTable Table of configured configuration table entries (with no CryptoKey + returned): configuration table index, KeyOwnerGuid, Capability. + Should have sufficient space to store up to ConfigurationCount + entries. + + @retval EFI_SUCCESS The ICI is ready for use. + @retval EFI_NO_RESPONSE No response was received from the ICI. + @retval EFI_DEVICE_ERROR An error occurred when attempting to access the ICI. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_INVALID_PARAMETER Configuration table is NULL. + @retval EFI_INVALID_PARAMETER StartIndex is out of bounds. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_GET_CONFIGURATION) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN UINT64 StartIndex, + IN UINT64 ConfigurationCount, + IN EFI_GUID *KeyOwnerGuid OPTIONAL, + OUT EFI_BLOCK_IO_CRYPTO_RESPONSE_CONFIGURATION_ENTRY *ConfigurationTable +); + +/** + Reads the requested number of blocks from the device and optionally decrypts + them inline. + + TheReadExtended() function allows the caller to perform a storage device read + operation. The function reads the requested number of blocks from the device + and then if Index is specified decrypts them inline. All the blocks are read + and decrypted (if decryption requested), or an error is returned. + + If there is no media in the device, the function returns EFI_NO_MEDIA. If the + MediaId is not the ID for the current media in the device, the function returns + EFI_MEDIA_CHANGED. + + If EFI_DEVICE_ERROR, EFI_NO_MEDIA, or EFI_MEDIA_CHANGED is returned and nonblocking + I/O is being used, the Event associated with this request will not be signaled. + + In addition to standard storage transaction parameters (LBA, IO size, and buffer), + this command will also specify a configuration table Index and CryptoIvInput + when data has to be decrypted inline by the controller after being read from + the storage device. If an Index parameter is not specified, no decryption is + performed. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in] MediaId The media ID that the read request is for. + @param[in] LBA The starting logical block address to read from on + the device. + @param[in, out] Token A pointer to the token associated with the transaction. + @param[in] BufferSize The size of the Buffer in bytes. This must be a multiple + of the intrinsic block size of the device. + @param[out] Buffer A pointer to the destination buffer for the data. The + caller is responsible for either having implicit or + explicit ownership of the buffer. + @param[in] Index A pointer to the configuration table index. This is + optional. + @param[in] CryptoIvInput A pointer to a buffer that contains additional + cryptographic parameters as required by the capability + referenced by the configuration table index, such as + cryptographic initialization vector. + + @retval EFI_SUCCESS The read request was queued if Token-> Event is not NULL. + The data was read correctly from the device if the + Token->Event is NULL. + @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform + the read operation and/or decryption operation. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic + block size of the device. + @retval EFI_INVALID_PARAMETER This is NULL, or the read request contains LBAs that are + not valid, or the buffer is not on proper alignment. + @retval EFI_INVALID_PARAMETER CryptoIvInput is incorrect. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of + resources. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_READ_EXTENDED) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA LBA, + IN OUT EFI_BLOCK_IO_CRYPTO_TOKEN *Token, + IN UINT64 BufferSize, + OUT VOID *Buffer, + IN UINT64 *Index OPTIONAL, + IN VOID *CryptoIvInput OPTIONAL + ); + +/** + Optionally encrypts a specified number of blocks inline and then writes to the + device. + + The WriteExtended() function allows the caller to perform a storage device write + operation. The function encrypts the requested number of blocks inline if Index + is specified and then writes them to the device. All the blocks are encrypted + (if encryption requested) and written, or an error is returned. + + If there is no media in the device, the function returns EFI_NO_MEDIA. If the + MediaId is not the ID for the current media in the device, the function returns + EFI_MEDIA_CHANGED. + + If EFI_DEVICE_ERROR, EFI_NO_MEDIA, or EFI_MEDIA_CHANGED is returned and nonblocking + I/O is being used, the Event associated with this request will not be signaled. + + In addition to standard storage transaction parameters (LBA, IO size, and buffer), + this command will also specify a configuration table Index and a CryptoIvInput + when data has to be decrypted inline by the controller before being written to + the storage device. If no Index parameter is specified, no encryption is performed. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in] MediaId The media ID that the read request is for. + @param[in] LBA The starting logical block address to read from on + the device. + @param[in, out] Token A pointer to the token associated with the transaction. + @param[in] BufferSize The size of the Buffer in bytes. This must be a multiple + of the intrinsic block size of the device. + @param[in] Buffer A pointer to the source buffer for the data. + @param[in] Index A pointer to the configuration table index. This is + optional. + @param[in] CryptoIvInput A pointer to a buffer that contains additional + cryptographic parameters as required by the capability + referenced by the configuration table index, such as + cryptographic initialization vector. + + @retval EFI_SUCCESS The request to encrypt (optionally) and write was queued + if Event is not NULL. The data was encrypted (optionally) + and written correctly to the device if the Event is NULL. + @retval EFI_WRITE_PROTECTED The device cannot be written to. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_DEVICE_ERROR The device reported an error while attempting to encrypt + blocks or to perform the write operation. + @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic + block size of the device. + @retval EFI_INVALID_PARAMETER This is NULL, or the write request contains LBAs that are + not valid, or the buffer is not on proper alignment. + @retval EFI_INVALID_PARAMETER CryptoIvInput is incorrect. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of + resources. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_WRITE_EXTENDED) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN UINT32 MediaId, + IN EFI_LBA LBA, + IN OUT EFI_BLOCK_IO_CRYPTO_TOKEN *Token, + IN UINT64 BufferSize, + IN VOID *Buffer, + IN UINT64 *Index OPTIONAL, + IN VOID *CryptoIvInput OPTIONAL + ); + +/** + Flushes all modified data toa physical block device. + + The FlushBlocks() function flushes all modified data to the physical block device. + Any modified data that has to be encrypted must have been already encrypted as a + part of WriteExtended() operation - inline crypto operation cannot be a part of + flush operation. + + All data written to the device prior to the flush must be physically written before + returning EFI_SUCCESS from this function. This would include any cached data the + driver may have cached, and cached data the device may have cached. A flush may + cause a read request following the flush to force a device access. + + If EFI_DEVICE_ERROR, EFI_NO_MEDIA, EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED is + returned and non-blocking I/O is being used, the Event associated with this request + will not be signaled. + + @param[in] This Pointer to the EFI_BLOCK_IO_CRYPTO_PROTOCOL instance. + @param[in, out] Token A pointer to the token associated with the transaction. + + @retval EFI_SUCCESS The flush request was queued if Event is not NULL. All + outstanding data was written correctly to the device if + the Event is NULL. + @retval EFI_DEVICE_ERROR The device reported an error while attempting to write data. + @retval EFI_WRITE_PROTECTED The device cannot be written to. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. + @retval EFI_INVALID_PARAMETER This is NULL. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of + resources. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_BLOCK_IO_CRYPTO_FLUSH) ( + IN EFI_BLOCK_IO_CRYPTO_PROTOCOL *This, + IN OUT EFI_BLOCK_IO_CRYPTO_TOKEN *Token + ); + +/// +/// The EFI_BLOCK_IO_CRYPTO_PROTOCOL defines a UEFI protocol that can be used by UEFI +/// drivers and applications to perform block encryption on a storage device, such as UFS. +/// +struct _EFI_BLOCK_IO_CRYPTO_PROTOCOL { + EFI_BLOCK_IO_MEDIA *Media; + EFI_BLOCK_IO_CRYPTO_RESET Reset; + EFI_BLOCK_IO_CRYPTO_GET_CAPABILITIES GetCapabilities; + EFI_BLOCK_IO_CRYPTO_SET_CONFIGURATION SetConfiguration; + EFI_BLOCK_IO_CRYPTO_GET_CONFIGURATION GetConfiguration; + EFI_BLOCK_IO_CRYPTO_READ_EXTENDED ReadExtended; + EFI_BLOCK_IO_CRYPTO_WRITE_EXTENDED WriteExtended; + EFI_BLOCK_IO_CRYPTO_FLUSH FlushBlocks; +}; + +extern EFI_GUID gEfiBlockIoCryptoProtocolGuid; + +#endif + |