diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Ppi/BlockIo2.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Ppi/BlockIo2.h | 223 |
1 files changed, 223 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Ppi/BlockIo2.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Ppi/BlockIo2.h new file mode 100644 index 0000000000..c76b7033e6 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Ppi/BlockIo2.h @@ -0,0 +1,223 @@ +/** @file + Provides the services required to access a block I/O 2 device during PEI recovery + boot mode. + +Copyright (c) 2015, Intel Corporation. All rights reserved.<BR> +This program and the accompanying materials are licensed and made available under +the terms and conditions of the BSD License that accompanies this distribution. +The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php. + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + @par Revision Reference: + This PPI is defined in UEFI Platform Initialization Specification 1.4 Volume 1: + Pre-EFI Initalization Core Interface. + +**/ + +#ifndef _PEI_BLOCK_IO2_H_ +#define _PEI_BLOCK_IO2_H_ + +#include <Ppi/BlockIo.h> +#include <Protocol/DevicePath.h> + +/// +/// Global ID for EFI_PEI_RECOVERY_BLOCK_IO2_PPI +/// +#define EFI_PEI_RECOVERY_BLOCK_IO2_PPI_GUID \ + { \ + 0x26cc0fad, 0xbeb3, 0x478a, { 0x91, 0xb2, 0xc, 0x18, 0x8f, 0x72, 0x61, 0x98 } \ + } + +/// +/// The forward declaration for EFI_PEI_RECOVERY_BLOCK_IO_PPI. +/// +typedef struct _EFI_PEI_RECOVERY_BLOCK_IO2_PPI EFI_PEI_RECOVERY_BLOCK_IO2_PPI; + +#define EFI_PEI_RECOVERY_BLOCK_IO2_PPI_REVISION 0x00010000 + +typedef struct { + /// + /// A type of interface that the device being referenced by DeviceIndex is + /// attached to. This field re-uses Messaging Device Path Node sub-type values + /// as defined by Section 9.3.5 Messaging Device Path of UEFI Specification. + /// When more than one sub-type is associated with the interface, sub-type with + /// the smallest number must be used. + /// + UINT8 InterfaceType; + /// + /// A flag that indicates if media is removable. + /// + BOOLEAN RemovableMedia; + /// + /// A flag that indicates if media is present. This flag is always set for + /// non-removable media devices. + /// + BOOLEAN MediaPresent; + /// + /// A flag that indicates if media is read-only. + /// + BOOLEAN ReadOnly; + /// + /// The size of a logical block in bytes. + /// + UINT32 BlockSize; + /// + /// The last logical block that the device supports. + /// + EFI_PEI_LBA LastBlock; +} EFI_PEI_BLOCK_IO2_MEDIA; + +/** + Gets the count of block I/O devices that one specific block driver detects. + + This function is used for getting the count of block I/O devices that one + specific block driver detects. To the PEI ATAPI driver, it returns the number + of all the detected ATAPI devices it detects during the enumeration process. + To the PEI legacy floppy driver, it returns the number of all the legacy + devices it finds during its enumeration process. If no device is detected, + then the function will return zero. + + @param[in] PeiServices General-purpose services that are available + to every PEIM. + @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI + instance. + @param[out] NumberBlockDevices The number of block I/O devices discovered. + + @retval EFI_SUCCESS The operation performed successfully. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PEI_GET_NUMBER_BLOCK_DEVICES2)( + IN EFI_PEI_SERVICES **PeiServices, + IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, + OUT UINTN *NumberBlockDevices + ); + +/** + Gets a block device's media information. + + This function will provide the caller with the specified block device's media + information. If the media changes, calling this function will update the media + information accordingly. + + @param[in] PeiServices General-purpose services that are available to every + PEIM + @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. + @param[in] DeviceIndex Specifies the block device to which the function wants + to talk. Because the driver that implements Block I/O + PPIs will manage multiple block devices, the PPIs that + want to talk to a single device must specify the + device index that was assigned during the enumeration + process. This index is a number from one to + NumberBlockDevices. + @param[out] MediaInfo The media information of the specified block media. + The caller is responsible for the ownership of this + data structure. + + @par Note: + The MediaInfo structure describes an enumeration of possible block device + types. This enumeration exists because no device paths are actually passed + across interfaces that describe the type or class of hardware that is publishing + the block I/O interface. This enumeration will allow for policy decisions + in the Recovery PEIM, such as "Try to recover from legacy floppy first, + LS-120 second, CD-ROM third." If there are multiple partitions abstracted + by a given device type, they should be reported in ascending order; this + order also applies to nested partitions, such as legacy MBR, where the + outermost partitions would have precedence in the reporting order. The + same logic applies to systems such as IDE that have precedence relationships + like "Master/Slave" or "Primary/Secondary". The master device should be + reported first, the slave second. + + @retval EFI_SUCCESS Media information about the specified block device + was obtained successfully. + @retval EFI_DEVICE_ERROR Cannot get the media information due to a hardware + error. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PEI_GET_DEVICE_MEDIA_INFORMATION2)( + IN EFI_PEI_SERVICES **PeiServices, + IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, + IN UINTN DeviceIndex, + OUT EFI_PEI_BLOCK_IO2_MEDIA *MediaInfo + ); + +/** + Reads the requested number of blocks from the specified block device. + + The function reads the requested number of blocks from the device. All the + blocks are read, or an error is returned. If there is no media in the device, + the function returns EFI_NO_MEDIA. + + @param[in] PeiServices General-purpose services that are available to + every PEIM. + @param[in] This Indicates the EFI_PEI_RECOVERY_BLOCK_IO2_PPI instance. + @param[in] DeviceIndex Specifies the block device to which the function wants + to talk. Because the driver that implements Block I/O + PPIs will manage multiple block devices, PPIs that + want to talk to a single device must specify the device + index that was assigned during the enumeration process. + This index is a number from one to NumberBlockDevices. + @param[in] StartLBA The starting logical block address (LBA) to read from + on the device + @param[in] BufferSize The size of the Buffer in bytes. This number must be + a multiple of the intrinsic block size of the device. + @param[out] Buffer A pointer to the destination buffer for the data. + The caller is responsible for the ownership of the + buffer. + + @retval EFI_SUCCESS The data was read correctly from the device. + @retval EFI_DEVICE_ERROR The device reported an error while attempting + to perform the read operation. + @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not + valid, or the buffer is not properly aligned. + @retval EFI_NO_MEDIA There is no media in the device. + @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of + the intrinsic block size of the device. + +**/ +typedef +EFI_STATUS +(EFIAPI *EFI_PEI_READ_BLOCKS2)( + IN EFI_PEI_SERVICES **PeiServices, + IN EFI_PEI_RECOVERY_BLOCK_IO2_PPI *This, + IN UINTN DeviceIndex, + IN EFI_PEI_LBA StartLBA, + IN UINTN BufferSize, + OUT VOID *Buffer + ); + +/// +/// EFI_PEI_RECOVERY_BLOCK_IO_PPI provides the services that are required +/// to access a block I/O device during PEI recovery boot mode. +/// +struct _EFI_PEI_RECOVERY_BLOCK_IO2_PPI { + /// + /// The revision to which the interface adheres. + /// All future revisions must be backwards compatible. + /// + UINT64 Revision; + /// + /// Gets the number of block I/O devices that the specific block driver manages. + /// + EFI_PEI_GET_NUMBER_BLOCK_DEVICES2 GetNumberOfBlockDevices; + + /// + /// Gets the specified media information. + /// + EFI_PEI_GET_DEVICE_MEDIA_INFORMATION2 GetBlockDeviceMediaInfo; + + /// + /// Reads the requested number of blocks from the specified block device. + /// + EFI_PEI_READ_BLOCKS2 ReadBlocks; +}; + +extern EFI_GUID gEfiPeiVirtualBlockIo2PpiGuid; + +#endif |