diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/UefiScsiLib.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/UefiScsiLib.h | 1181 |
1 files changed, 1181 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/UefiScsiLib.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/UefiScsiLib.h new file mode 100644 index 0000000000..5257f76584 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/Library/UefiScsiLib.h @@ -0,0 +1,1181 @@ +/** @file + Provides the functions to submit Scsi commands defined in SCSI-2 specification for SCSI devices. + + This library class provides the functions to submit SCSI commands defined in SCSI-2 specification + for hard drive, CD and DVD devices that are the most common SCSI boot targets used by UEFI platforms. + This library class depends on SCSI I/O Protocol defined in UEFI Specification and SCSI-2 industry standard. + +Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR> +This program and the accompanying materials +are licensed and made available under the terms and conditions of the BSD License +which accompanies this distribution. The full text of the license may be found at +http://opensource.org/licenses/bsd-license.php + +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __SCSI_LIB_H__ +#define __SCSI_LIB_H__ + +#include <Protocol/ScsiIo.h> + +/** + Execute Test Unit Ready SCSI command on a specific SCSI target. + + Executes the Test Unit Ready command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after Timeout 100 ns units. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance + for the specific SCSI target. + @param[in] Timeout The timeout in 100 ns units to use for the execution + of this SCSI Request Packet. A Timeout value of + zero means that this function will wait indefinitely + for the SCSI Request Packet to execute. If Timeout + is greater than zero, then this function will return + EFI_TIMEOUT if the time required to execute the SCSI + Request Packet is greater than Timeout. + @param[in, out] SenseData A pointer to sense data that was generated by + the execution of the SCSI Request Packet. This + buffer must be allocated by the caller. + If SenseDataLength is 0, then this parameter is + optional and may be NULL. + @param[in, out] SenseDataLength On input, a pointer to the length in bytes of + the SenseData buffer. On output, a pointer to + the number of bytes written to the SenseData buffer. + @param[out] HostAdapterStatus The status of the SCSI Host Controller that produces + the SCSI bus containing the SCSI target specified by + ScsiIo when the SCSI Request Packet was executed. + See the EFI SCSI I/O Protocol in the UEFI Specification + for details on the possible return values. + @param[out] TargetStatus The status returned by the SCSI target specified + by ScsiIo when the SCSI Request Packet was executed + on the SCSI Host Controller. See the EFI SCSI I/O + Protocol in the UEFI Specification for details on + the possible return values. + + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status + information. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already + queued. The SCSI Request Packet was not sent, so + no additional status information is available. + The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiTestUnitReadyCommand ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus + ); + + +/** + Execute Inquiry SCSI command on a specific SCSI target. + + Executes the Inquiry command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after Timeout 100 ns units. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If InquiryDataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance + for the specific SCSI target. + @param[in] Timeout The timeout in 100 ns units to use for the + execution of this SCSI Request Packet. A Timeout + value of zero means that this function will wait + indefinitely for the SCSI Request Packet to execute. + If Timeout is greater than zero, then this function + will return EFI_TIMEOUT if the time required to + execute the SCSI Request Packet is greater than Timeout. + @param[in, out] SenseData A pointer to sense data that was generated + by the execution of the SCSI Request Packet. + This buffer must be allocated by the caller. + If SenseDataLength is 0, then this parameter + is optional and may be NULL. + @param[in, out] SenseDataLength On input, the length in bytes of the SenseData buffer. + On output, the number of bytes written to the SenseData buffer. + @param[out] HostAdapterStatus The status of the SCSI Host Controller that + produces the SCSI bus containing the SCSI + target specified by ScsiIo when the SCSI + Request Packet was executed. See the EFI + SCSI I/O Protocol in the UEFI Specification + for details on the possible return values. + @param[out] TargetStatus The status returned by the SCSI target specified + by ScsiIo when the SCSI Request Packet was + executed on the SCSI Host Controller. + See the EFI SCSI I/O Protocol in the UEFI + Specification for details on the possible + return values. + @param[in, out] InquiryDataBuffer A pointer to inquiry data that was generated + by the execution of the SCSI Request Packet. + This buffer must be allocated by the caller. + If InquiryDataLength is 0, then this parameter + is optional and may be NULL. + @param[in, out] InquiryDataLength On input, a pointer to the length in bytes + of the InquiryDataBuffer buffer. + On output, a pointer to the number of bytes + written to the InquiryDataBuffer buffer. + @param[in] EnableVitalProductData If TRUE, then the supported vital product + data is returned in InquiryDataBuffer. + If FALSE, then the standard inquiry data is + returned in InquiryDataBuffer. + + @retval EFI_SUCCESS The command was executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiInquiryCommand ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *InquiryDataBuffer, OPTIONAL + IN OUT UINT32 *InquiryDataLength, + IN BOOLEAN EnableVitalProductData + ); + + +/** + Execute Inquiry SCSI command on a specific SCSI target. + + Executes the Inquiry command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after Timeout 100 ns units. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If InquiryDataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If InquiryDataLength is non-zero and InquiryDataBuffer is not NULL, InquiryDataBuffer + must meet buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance + for the specific SCSI target. + @param[in] Timeout The timeout in 100 ns units to use for the + execution of this SCSI Request Packet. A Timeout + value of zero means that this function will wait + indefinitely for the SCSI Request Packet to execute. + If Timeout is greater than zero, then this function + will return EFI_TIMEOUT if the time required to + execute the SCSI Request Packet is greater than Timeout. + @param[in, out] SenseData A pointer to sense data that was generated + by the execution of the SCSI Request Packet. + This buffer must be allocated by the caller. + If SenseDataLength is 0, then this parameter + is optional and may be NULL. + @param[in, out] SenseDataLength On input, the length in bytes of the SenseData buffer. + On output, the number of bytes written to the SenseData buffer. + @param[out] HostAdapterStatus The status of the SCSI Host Controller that + produces the SCSI bus containing the SCSI + target specified by ScsiIo when the SCSI + Request Packet was executed. See the EFI + SCSI I/O Protocol in the UEFI Specification + for details on the possible return values. + @param[out] TargetStatus The status returned by the SCSI target specified + by ScsiIo when the SCSI Request Packet was + executed on the SCSI Host Controller. + See the EFI SCSI I/O Protocol in the UEFI + Specification for details on the possible + return values. + @param[in, out] InquiryDataBuffer A pointer to inquiry data that was generated + by the execution of the SCSI Request Packet. + This buffer must be allocated by the caller. + If InquiryDataLength is 0, then this parameter + is optional and may be NULL. + @param[in, out] InquiryDataLength On input, a pointer to the length in bytes + of the InquiryDataBuffer buffer. + On output, a pointer to the number of bytes + written to the InquiryDataBuffer buffer. + @param[in] EnableVitalProductData If TRUE, then the supported vital product + data for the PageCode is returned in InquiryDataBuffer. + If FALSE, then the standard inquiry data is + returned in InquiryDataBuffer and PageCode is ignored. + @param[in] PageCode The page code of the vital product data. + It's ignored if EnableVitalProductData is FALSE. + + @retval EFI_SUCCESS The command executed successfully. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that order + for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + InquiryDataBuffer could not be transferred. The actual + number of bytes transferred is returned in InquiryDataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there + are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI + Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for additional + status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not + supported by the SCSI initiator(i.e., SCSI Host Controller). + The SCSI Request Packet was not sent, so no additional + status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request + Packet to execute. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiInquiryCommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *InquiryDataBuffer, OPTIONAL + IN OUT UINT32 *InquiryDataLength, + IN BOOLEAN EnableVitalProductData, + IN UINT8 PageCode + ); + + +/** + Execute Mode Sense(10) SCSI command on a specific SCSI target. + + Executes the SCSI Mode Sense(10) command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout + after Timeout 100 ns units. The DBDField, PageControl, and PageCode parameters + are used to construct the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to the SCSI I/O Protocol instance + for the specific SCSI target. + @param[in] Timeout The timeout in 100 ns units to use for the + execution of this SCSI Request Packet. A Timeout + value of zero means that this function will wait + indefinitely for the SCSI Request Packet to execute. + If Timeout is greater than zero, then this function + will return EFI_TIMEOUT if the time required to + execute the SCSI Request Packet is greater than Timeout. + @param[in, out] SenseData A pointer to sense data that was generated + by the execution of the SCSI Request Packet. + This buffer must be allocated by the caller. + If SenseDataLength is 0, then this parameter + is optional and may be NULL. + @param[in, out] SenseDataLength On input, the length in bytes of the SenseData buffer. + On output, the number of bytes written to the SenseData buffer. + @param[out] HostAdapterStatus The status of the SCSI Host Controller that + produces the SCSI bus containing the SCSI target + specified by ScsiIo when the SCSI Request Packet + was executed. See the EFI SCSI I/O Protocol in the + UEFI Specification for details on the possible + return values. + @param[out] TargetStatus The status returned by the SCSI target specified + by ScsiIo when the SCSI Request Packet was executed + on the SCSI Host Controller. See the EFI SCSI + I/O Protocol in the UEFI Specification for details + on the possible return values. + @param[in, out] DataBuffer A pointer to data that was generated by the + execution of the SCSI Request Packet. This + buffer must be allocated by the caller. If + DataLength is 0, then this parameter is optional + and may be NULL. + @param[in, out] DataLength On input, a pointer to the length in bytes of + the DataBuffer buffer. On output, a pointer + to the number of bytes written to the DataBuffer + buffer. + @param[in] DBDField Specifies the DBD field of the CDB for this SCSI Command. + @param[in] PageControl Specifies the PC field of the CDB for this SCSI Command. + @param[in] PageCode Specifies the Page Control field of the CDB for this SCSI Command. + + @retval EFI_SUCCESS The command was executed successfully. + See HostAdapterStatus, TargetStatus, SenseDataLength, + and SenseData in that order for additional status information. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the + entire DataBuffer could not be transferred. + The actual number of bytes transferred is returned + in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + The SCSI Request Packet was not sent, so no additional + status information is available. The caller may retry + again later. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send + SCSI Request Packet. See HostAdapterStatus, TargetStatus, + SenseDataLength, and SenseData in that order for + additional status information. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI + Host Controller). The SCSI Request Packet was not + sent, so no additional status information is available. + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI + Request Packet to execute. See HostAdapterStatus, + TargetStatus, SenseDataLength, and SenseData in that + order for additional status information. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiModeSense10Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT8 DBDField, OPTIONAL + IN UINT8 PageControl, + IN UINT8 PageCode + ); + + + +/** + Execute Request Sense SCSI command on a specific SCSI target. + + Executes the Request Sense command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after Timeout 100 ns units. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are + too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiRequestSenseCommand ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus + ); + + +/** + Execute Read Capacity SCSI command on a specific SCSI target. + + Executes the SCSI Read Capacity command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after + Timeout 100 ns units. The Pmi parameter is used to construct the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] Pmi Partial medium indicator. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiReadCapacityCommand ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN BOOLEAN Pmi + ); + + +/** + Execute Read Capacity SCSI 16 command on a specific SCSI target. + + Executes the SCSI Read Capacity 16 command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after + Timeout 100 ns units. The Pmi parameter is used to construct the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] Pmi Partial medium indicator. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire + DataBuffer could not be transferred. The actual + number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because + there are too many SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet + is not supported by the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiReadCapacity16Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN BOOLEAN Pmi + ); + + +/** + Execute Read(10) SCSI command on a specific SCSI target. + + Executes the SCSI Read(10) command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout + after Timeout 100 ns units. The StartLba and SectorSize parameters are used to + construct the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 10 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiRead10Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize + ); + + +/** + Execute Write(10) SCSI command on a specific SCSI target. + + Executes the SCSI Write(10) command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after + Timeout 100 ns units. The StartLba and SectorSize parameters are used to construct + the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite10Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize + ); + +/** + Execute Read(16) SCSI command on a specific SCSI target. + + Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout + after Timeout 100 ns units. The StartLba and SectorSize parameters are used to + construct the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiRead16Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize + ); + + +/** + Execute Write(16) SCSI command on a specific SCSI target. + + Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo. + If Timeout is zero, then this function waits indefinitely for the command to complete. + If Timeout is greater than zero, then the command is executed and will timeout after + Timeout 100 ns units. The StartLba and SectorSize parameters are used to construct + the CDB for this SCSI command. + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet buffer + alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise EFI_INVALID_PARAMETER + gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks of data that shall be transferred. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the entire DataBuffer could + not be transferred. The actual number of bytes transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be sent because there are too many + SCSI Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI Request Packet is not supported by + the SCSI initiator(i.e., SCSI Host Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet are invalid. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite16Command ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize + ); + + +/** + Execute blocking/non-blocking Read(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Write(10) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(10) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(10) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite10CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT32 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Read(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Read(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo A pointer to SCSI IO protocol. + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer Read 16 command data. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Read(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiRead16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + + +/** + Execute blocking/non-blocking Write(16) SCSI command on a specific SCSI + target. + + Executes the SCSI Write(16) command on the SCSI target specified by ScsiIo. + When Event is NULL, blocking command will be executed. Otherwise non-blocking + command will be executed. + For blocking I/O, if Timeout is zero, this function will wait indefinitely + for the command to complete. If Timeout is greater than zero, then the + command is executed and will timeout after Timeout 100 ns units. + For non-blocking I/O, if Timeout is zero, Event will be signaled only after + the command to completes. If Timeout is greater than zero, Event will also be + signaled after Timeout 100 ns units. + The StartLba and SectorSize parameters are used to construct the CDB for this + SCSI command. + + If ScsiIo is NULL, then ASSERT(). + If SenseDataLength is NULL, then ASSERT(). + If HostAdapterStatus is NULL, then ASSERT(). + If TargetStatus is NULL, then ASSERT(). + If DataLength is NULL, then ASSERT(). + + If SenseDataLength is non-zero and SenseData is not NULL, SenseData must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + If DataLength is non-zero and DataBuffer is not NULL, DataBuffer must meet + buffer alignment requirement defined in EFI_SCSI_IO_PROTOCOL. Otherwise + EFI_INVALID_PARAMETER gets returned. + + @param[in] ScsiIo SCSI IO Protocol to use + @param[in] Timeout The length of timeout period. + @param[in, out] SenseData A pointer to output sense data. + @param[in, out] SenseDataLength The length of output sense data. + @param[out] HostAdapterStatus The status of Host Adapter. + @param[out] TargetStatus The status of the target. + @param[in, out] DataBuffer A pointer to a data buffer. + @param[in, out] DataLength The length of data buffer. + @param[in] StartLba The start address of LBA. + @param[in] SectorSize The number of contiguous logical blocks + of data that shall be transferred. + @param[in] Event If the SCSI target does not support + non-blocking I/O, then Event is ignored, + and blocking I/O is performed. If Event + is NULL, then blocking I/O is performed. + If Event is not NULL and non-blocking + I/O is supported, then non-blocking I/O + is performed, and Event will be signaled + when the SCSI Write(16) command + completes. + + @retval EFI_SUCCESS Command is executed successfully. + @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, + but the entire DataBuffer could not be + transferred. The actual number of bytes + transferred is returned in DataLength. + @retval EFI_NOT_READY The SCSI Request Packet could not be + sent because there are too many SCSI + Command Packets already queued. + @retval EFI_DEVICE_ERROR A device error occurred while attempting + to send SCSI Request Packet. + @retval EFI_UNSUPPORTED The command described by the SCSI + Request Packet is not supported by the + SCSI initiator(i.e., SCSI Host + Controller) + @retval EFI_TIMEOUT A timeout occurred while waiting for the + SCSI Request Packet to execute. + @retval EFI_INVALID_PARAMETER The contents of the SCSI Request Packet + are invalid. + @retval EFI_OUT_OF_RESOURCES The request could not be completed due + to a lack of resources. + +**/ +EFI_STATUS +EFIAPI +ScsiWrite16CommandEx ( + IN EFI_SCSI_IO_PROTOCOL *ScsiIo, + IN UINT64 Timeout, + IN OUT VOID *SenseData, OPTIONAL + IN OUT UINT8 *SenseDataLength, + OUT UINT8 *HostAdapterStatus, + OUT UINT8 *TargetStatus, + IN OUT VOID *DataBuffer, OPTIONAL + IN OUT UINT32 *DataLength, + IN UINT64 StartLba, + IN UINT32 SectorSize, + IN EFI_EVENT Event OPTIONAL + ); + +#endif |