diff options
Diffstat (limited to 'src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/IndustryStandard/Usb.h')
| -rw-r--r-- | src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/IndustryStandard/Usb.h | 386 |
1 files changed, 386 insertions, 0 deletions
diff --git a/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/IndustryStandard/Usb.h b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/IndustryStandard/Usb.h new file mode 100644 index 0000000000..38c4d853e5 --- /dev/null +++ b/src/vendorcode/intel/edk2/UDK2017/MdePkg/Include/IndustryStandard/Usb.h @@ -0,0 +1,386 @@ +/** @file + Support for USB 2.0 standard. + + Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __USB_H__ +#define __USB_H__ + +// +// Subset of Class and Subclass definitions from USB Specs +// + +// +// Usb mass storage class code +// +#define USB_MASS_STORE_CLASS 0x08 + +// +// Usb mass storage subclass code, specify the command set used. +// +#define USB_MASS_STORE_RBC 0x01 ///< Reduced Block Commands +#define USB_MASS_STORE_8020I 0x02 ///< SFF-8020i, typically a CD/DVD device +#define USB_MASS_STORE_QIC 0x03 ///< Typically a tape device +#define USB_MASS_STORE_UFI 0x04 ///< Typically a floppy disk driver device +#define USB_MASS_STORE_8070I 0x05 ///< SFF-8070i, typically a floppy disk driver device. +#define USB_MASS_STORE_SCSI 0x06 ///< SCSI transparent command set + +// +// Usb mass storage protocol code, specify the transport protocol +// +#define USB_MASS_STORE_CBI0 0x00 ///< CBI protocol with command completion interrupt +#define USB_MASS_STORE_CBI1 0x01 ///< CBI protocol without command completion interrupt +#define USB_MASS_STORE_BOT 0x50 ///< Bulk-Only Transport + +// +// Standard device request and request type +// USB 2.0 spec, Section 9.4 +// +#define USB_DEV_GET_STATUS 0x00 +#define USB_DEV_GET_STATUS_REQ_TYPE_D 0x80 // Receiver : Device +#define USB_DEV_GET_STATUS_REQ_TYPE_I 0x81 // Receiver : Interface +#define USB_DEV_GET_STATUS_REQ_TYPE_E 0x82 // Receiver : Endpoint + +#define USB_DEV_CLEAR_FEATURE 0x01 +#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device +#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface +#define USB_DEV_CLEAR_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint + +#define USB_DEV_SET_FEATURE 0x03 +#define USB_DEV_SET_FEATURE_REQ_TYPE_D 0x00 // Receiver : Device +#define USB_DEV_SET_FEATURE_REQ_TYPE_I 0x01 // Receiver : Interface +#define USB_DEV_SET_FEATURE_REQ_TYPE_E 0x02 // Receiver : Endpoint + +#define USB_DEV_SET_ADDRESS 0x05 +#define USB_DEV_SET_ADDRESS_REQ_TYPE 0x00 + +#define USB_DEV_GET_DESCRIPTOR 0x06 +#define USB_DEV_GET_DESCRIPTOR_REQ_TYPE 0x80 + +#define USB_DEV_SET_DESCRIPTOR 0x07 +#define USB_DEV_SET_DESCRIPTOR_REQ_TYPE 0x00 + +#define USB_DEV_GET_CONFIGURATION 0x08 +#define USB_DEV_GET_CONFIGURATION_REQ_TYPE 0x80 + +#define USB_DEV_SET_CONFIGURATION 0x09 +#define USB_DEV_SET_CONFIGURATION_REQ_TYPE 0x00 + +#define USB_DEV_GET_INTERFACE 0x0A +#define USB_DEV_GET_INTERFACE_REQ_TYPE 0x81 + +#define USB_DEV_SET_INTERFACE 0x0B +#define USB_DEV_SET_INTERFACE_REQ_TYPE 0x01 + +#define USB_DEV_SYNCH_FRAME 0x0C +#define USB_DEV_SYNCH_FRAME_REQ_TYPE 0x82 + + +// +// USB standard descriptors and reqeust +// +#pragma pack(1) + +/// +/// Format of Setup Data for USB Device Requests +/// USB 2.0 spec, Section 9.3 +/// +typedef struct { + UINT8 RequestType; + UINT8 Request; + UINT16 Value; + UINT16 Index; + UINT16 Length; +} USB_DEVICE_REQUEST; + +/// +/// Standard Device Descriptor +/// USB 2.0 spec, Section 9.6.1 +/// +typedef struct { + UINT8 Length; + UINT8 DescriptorType; + UINT16 BcdUSB; + UINT8 DeviceClass; + UINT8 DeviceSubClass; + UINT8 DeviceProtocol; + UINT8 MaxPacketSize0; + UINT16 IdVendor; + UINT16 IdProduct; + UINT16 BcdDevice; + UINT8 StrManufacturer; + UINT8 StrProduct; + UINT8 StrSerialNumber; + UINT8 NumConfigurations; +} USB_DEVICE_DESCRIPTOR; + +/// +/// Standard Configuration Descriptor +/// USB 2.0 spec, Section 9.6.3 +/// +typedef struct { + UINT8 Length; + UINT8 DescriptorType; + UINT16 TotalLength; + UINT8 NumInterfaces; + UINT8 ConfigurationValue; + UINT8 Configuration; + UINT8 Attributes; + UINT8 MaxPower; +} USB_CONFIG_DESCRIPTOR; + +/// +/// Standard Interface Descriptor +/// USB 2.0 spec, Section 9.6.5 +/// +typedef struct { + UINT8 Length; + UINT8 DescriptorType; + UINT8 InterfaceNumber; + UINT8 AlternateSetting; + UINT8 NumEndpoints; + UINT8 InterfaceClass; + UINT8 InterfaceSubClass; + UINT8 InterfaceProtocol; + UINT8 Interface; +} USB_INTERFACE_DESCRIPTOR; + +/// +/// Standard Endpoint Descriptor +/// USB 2.0 spec, Section 9.6.6 +/// +typedef struct { + UINT8 Length; + UINT8 DescriptorType; + UINT8 EndpointAddress; + UINT8 Attributes; + UINT16 MaxPacketSize; + UINT8 Interval; +} USB_ENDPOINT_DESCRIPTOR; + +/// +/// UNICODE String Descriptor +/// USB 2.0 spec, Section 9.6.7 +/// +typedef struct { + UINT8 Length; + UINT8 DescriptorType; + CHAR16 String[1]; +} EFI_USB_STRING_DESCRIPTOR; + +#pragma pack() + + +typedef enum { + // + // USB request type + // + USB_REQ_TYPE_STANDARD = (0x00 << 5), + USB_REQ_TYPE_CLASS = (0x01 << 5), + USB_REQ_TYPE_VENDOR = (0x02 << 5), + + // + // Standard control transfer request type, or the value + // to fill in EFI_USB_DEVICE_REQUEST.Request + // + USB_REQ_GET_STATUS = 0x00, + USB_REQ_CLEAR_FEATURE = 0x01, + USB_REQ_SET_FEATURE = 0x03, + USB_REQ_SET_ADDRESS = 0x05, + USB_REQ_GET_DESCRIPTOR = 0x06, + USB_REQ_SET_DESCRIPTOR = 0x07, + USB_REQ_GET_CONFIG = 0x08, + USB_REQ_SET_CONFIG = 0x09, + USB_REQ_GET_INTERFACE = 0x0A, + USB_REQ_SET_INTERFACE = 0x0B, + USB_REQ_SYNCH_FRAME = 0x0C, + + // + // Usb control transfer target + // + USB_TARGET_DEVICE = 0, + USB_TARGET_INTERFACE = 0x01, + USB_TARGET_ENDPOINT = 0x02, + USB_TARGET_OTHER = 0x03, + + // + // USB Descriptor types + // + USB_DESC_TYPE_DEVICE = 0x01, + USB_DESC_TYPE_CONFIG = 0x02, + USB_DESC_TYPE_STRING = 0x03, + USB_DESC_TYPE_INTERFACE = 0x04, + USB_DESC_TYPE_ENDPOINT = 0x05, + USB_DESC_TYPE_HID = 0x21, + USB_DESC_TYPE_REPORT = 0x22, + + // + // Features to be cleared by CLEAR_FEATURE requests + // + USB_FEATURE_ENDPOINT_HALT = 0, + + // + // USB endpoint types: 00: control, 01: isochronous, 10: bulk, 11: interrupt + // + USB_ENDPOINT_CONTROL = 0x00, + USB_ENDPOINT_ISO = 0x01, + USB_ENDPOINT_BULK = 0x02, + USB_ENDPOINT_INTERRUPT = 0x03, + + USB_ENDPOINT_TYPE_MASK = 0x03, + USB_ENDPOINT_DIR_IN = 0x80, + + // + //Use 200 ms to increase the error handling response time + // + EFI_USB_INTERRUPT_DELAY = 2000000 +} USB_TYPES_DEFINITION; + + +// +// HID constants definition, see Device Class Definition +// for Human Interface Devices (HID) rev1.11 +// + +// +// HID standard GET_DESCRIPTOR request. +// +#define USB_HID_GET_DESCRIPTOR_REQ_TYPE 0x81 + +// +// HID specific requests. +// +#define USB_HID_CLASS_GET_REQ_TYPE 0xa1 +#define USB_HID_CLASS_SET_REQ_TYPE 0x21 + +// +// HID report item format +// +#define HID_ITEM_FORMAT_SHORT 0 +#define HID_ITEM_FORMAT_LONG 1 + +// +// Special tag indicating long items +// +#define HID_ITEM_TAG_LONG 15 + +// +// HID report descriptor item type (prefix bit 2,3) +// +#define HID_ITEM_TYPE_MAIN 0 +#define HID_ITEM_TYPE_GLOBAL 1 +#define HID_ITEM_TYPE_LOCAL 2 +#define HID_ITEM_TYPE_RESERVED 3 + +// +// HID report descriptor main item tags +// +#define HID_MAIN_ITEM_TAG_INPUT 8 +#define HID_MAIN_ITEM_TAG_OUTPUT 9 +#define HID_MAIN_ITEM_TAG_FEATURE 11 +#define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION 10 +#define HID_MAIN_ITEM_TAG_END_COLLECTION 12 + +// +// HID report descriptor main item contents +// +#define HID_MAIN_ITEM_CONSTANT 0x001 +#define HID_MAIN_ITEM_VARIABLE 0x002 +#define HID_MAIN_ITEM_RELATIVE 0x004 +#define HID_MAIN_ITEM_WRAP 0x008 +#define HID_MAIN_ITEM_NONLINEAR 0x010 +#define HID_MAIN_ITEM_NO_PREFERRED 0x020 +#define HID_MAIN_ITEM_NULL_STATE 0x040 +#define HID_MAIN_ITEM_VOLATILE 0x080 +#define HID_MAIN_ITEM_BUFFERED_BYTE 0x100 + +// +// HID report descriptor collection item types +// +#define HID_COLLECTION_PHYSICAL 0 +#define HID_COLLECTION_APPLICATION 1 +#define HID_COLLECTION_LOGICAL 2 + +// +// HID report descriptor global item tags +// +#define HID_GLOBAL_ITEM_TAG_USAGE_PAGE 0 +#define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM 1 +#define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM 2 +#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM 3 +#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM 4 +#define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT 5 +#define HID_GLOBAL_ITEM_TAG_UNIT 6 +#define HID_GLOBAL_ITEM_TAG_REPORT_SIZE 7 +#define HID_GLOBAL_ITEM_TAG_REPORT_ID 8 +#define HID_GLOBAL_ITEM_TAG_REPORT_COUNT 9 +#define HID_GLOBAL_ITEM_TAG_PUSH 10 +#define HID_GLOBAL_ITEM_TAG_POP 11 + +// +// HID report descriptor local item tags +// +#define HID_LOCAL_ITEM_TAG_USAGE 0 +#define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM 1 +#define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM 2 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX 3 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM 4 +#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM 5 +#define HID_LOCAL_ITEM_TAG_STRING_INDEX 7 +#define HID_LOCAL_ITEM_TAG_STRING_MINIMUM 8 +#define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM 9 +#define HID_LOCAL_ITEM_TAG_DELIMITER 10 + +// +// HID report types +// +#define HID_INPUT_REPORT 1 +#define HID_OUTPUT_REPORT 2 +#define HID_FEATURE_REPORT 3 + +// +// HID class protocol request +// +#define EFI_USB_GET_REPORT_REQUEST 0x01 +#define EFI_USB_GET_IDLE_REQUEST 0x02 +#define EFI_USB_GET_PROTOCOL_REQUEST 0x03 +#define EFI_USB_SET_REPORT_REQUEST 0x09 +#define EFI_USB_SET_IDLE_REQUEST 0x0a +#define EFI_USB_SET_PROTOCOL_REQUEST 0x0b + +#pragma pack(1) +/// +/// Descriptor header for Report/Physical Descriptors +/// HID 1.1, section 6.2.1 +/// +typedef struct hid_class_descriptor { + UINT8 DescriptorType; + UINT16 DescriptorLength; +} EFI_USB_HID_CLASS_DESCRIPTOR; + +/// +/// The HID descriptor identifies the length and type +/// of subordinate descriptors for a device. +/// HID 1.1, section 6.2.1 +/// +typedef struct hid_descriptor { + UINT8 Length; + UINT8 DescriptorType; + UINT16 BcdHID; + UINT8 CountryCode; + UINT8 NumDescriptors; + EFI_USB_HID_CLASS_DESCRIPTOR HidClassDesc[1]; +} EFI_USB_HID_DESCRIPTOR; + +#pragma pack() + +#endif |