diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c')
| -rw-r--r-- | src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c | 1345 |
1 files changed, 1345 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c new file mode 100644 index 0000000000..773e7b2d61 --- /dev/null +++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/NB/mnphy.c @@ -0,0 +1,1345 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * mnphy.c + * + * Common Northbridge Phy support + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: (Mem/NB) + * @e \$Revision: 87494 $ @e \$Date: 2013-02-04 12:06:47 -0600 (Mon, 04 Feb 2013) $ + * + **/ +/***************************************************************************** +* + * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* *************************************************************************** +* +*/ + + +/* + *---------------------------------------------------------------------------- + * MODULES USED + * + *---------------------------------------------------------------------------- + */ + + + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "mport.h" +#include "mm.h" +#include "mn.h" +#include "mt.h" +#include "mu.h" +#include "PlatformMemoryConfiguration.h" +#include "heapManager.h" +#include "merrhdl.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) +#define FILECODE PROC_MEM_NB_MNPHY_FILECODE +/*---------------------------------------------------------------------------- + * DEFINITIONS AND MACROS + * + *---------------------------------------------------------------------------- + */ +#define UNUSED_CLK 4 + +/*---------------------------------------------------------------------------- + * TYPEDEFS AND STRUCTURES + * + *---------------------------------------------------------------------------- + */ +/// Type of an entry for processing phy init compensation for client NB +typedef struct { + BIT_FIELD_NAME IndexBitField; ///< Bit field on which the value is decided + BIT_FIELD_NAME StartTargetBitField; ///< First bit field to be modified + BIT_FIELD_NAME EndTargetBitField; ///< Last bit field to be modified + UINT16 ExtraValue; ///< Extra value needed to be written to bit field + CONST UINT16 (*TxPrePN)[3][5]; ///< Pointer to slew rate table +} PHY_COMP_INIT_CLIENTNB; + +/*---------------------------------------------------------------------------- + * PROTOTYPES OF LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ + + + +/*---------------------------------------------------------------------------- + * EXPORTED FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets a delay value a PCI register during training + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] TrnDly - type of delay to be set + * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed + * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding + * + * @return Value read + */ + +UINT32 +MemNGetTrainDlyNb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN TRN_DLY_TYPE TrnDly, + IN DRBN DrbnVar + ) +{ + return NBPtr->MemNcmnGetSetTrainDly (NBPtr, 0, TrnDly, DrbnVar, 0); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sets a delay value a PCI register during training + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] TrnDly - type of delay to be set + * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed + * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding + * @param[in] Field - Value to be programmed + * + */ + +VOID +MemNSetTrainDlyNb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN TRN_DLY_TYPE TrnDly, + IN DRBN DrbnVar, + IN UINT16 Field + ) +{ + NBPtr->MemNcmnGetSetTrainDly (NBPtr, 1, TrnDly, DrbnVar, Field); +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function executes prototypical Phy fence training function. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNPhyFenceTrainingUnb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 FenceThresholdTxDll; + UINT8 FenceThresholdRxDll; + UINT8 FenceThresholdTxPad; + UINT16 Fence2Data; + + MemNSetBitFieldNb (NBPtr, BFDataFence2, 0); + MemNSetBitFieldNb (NBPtr, BFFence2, 0); + // 1. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=10b. + // 2. Perform phy fence training. + // 3. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxDll]. + MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 2); + MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 30, 26, BFPhyFence); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tFenceThresholdTxDll\n"); + MemNTrainPhyFenceNb (NBPtr); + FenceThresholdTxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); + NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxDll); + + // 4. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=001b. + MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x1000); + + // 5. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=01b. + // 6. Perform phy fence training. + // 7. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdRxDll]. + MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 1); + MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 25, 21, BFPhyFence); + IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdRxDll\n"); + MemNTrainPhyFenceNb (NBPtr); + FenceThresholdRxDll = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); + NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdRxDll); + + // 8. Program D18F2x[1,0]9C_x0D0F_0[F,7:0]0F[AlwaysEnDllClks]=000b. + MemNSetBitFieldNb (NBPtr, BFAlwaysEnDllClks, 0x0000); + + // 9. Program D18F2x[1,0]9C_x0000_0008[FenceTrSel]=11b. + // 10. Perform phy fence training. + // 11. Write the calculated fence value to D18F2x[1,0]9C_x0000_000C[FenceThresholdTxPad]. + MemNSetBitFieldNb (NBPtr, BFFenceTrSel, 3); + MAKE_TSEFO (NBPtr->NBRegTable, DCT_PHY_ACCESS, 0x0C, 20, 16, BFPhyFence); + IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFenceThresholdTxPad\n"); + MemNTrainPhyFenceNb (NBPtr); + FenceThresholdTxPad = (UINT8) MemNGetBitFieldNb (NBPtr, BFPhyFence); + NBPtr->FamilySpecificHook[DetectMemPllError] (NBPtr, &FenceThresholdTxPad); + + // Program Fence2 threshold for Clk, Cmd, and Addr + if (FenceThresholdTxPad < 16) { + MemNSetBitFieldNb (NBPtr, BFClkFence2, FenceThresholdTxPad | 0x10); + MemNSetBitFieldNb (NBPtr, BFCmdFence2, FenceThresholdTxPad | 0x10); + MemNSetBitFieldNb (NBPtr, BFAddrFence2, FenceThresholdTxPad | 0x10); + } else { + MemNSetBitFieldNb (NBPtr, BFClkFence2, 0); + MemNSetBitFieldNb (NBPtr, BFCmdFence2, 0); + MemNSetBitFieldNb (NBPtr, BFAddrFence2, 0); + } + + // Program Fence2 threshold for data + Fence2Data = 0; + if (FenceThresholdTxPad < 16) { + Fence2Data |= FenceThresholdTxPad | 0x10; + } + if (FenceThresholdRxDll < 16) { + Fence2Data |= (FenceThresholdRxDll | 0x10) << 10; + } + if (FenceThresholdTxDll < 16) { + Fence2Data |= (FenceThresholdTxDll | 0x10) << 5; + } + MemNSetBitFieldNb (NBPtr, BFDataFence2, Fence2Data); + NBPtr->FamilySpecificHook[ProgramFence2RxDll] (NBPtr, &Fence2Data); + + if (NBPtr->MCTPtr->Status[SbLrdimms]) { + // 18. If motherboard routing requires CS[7:6] to adopt address timings, e.g. 3 LRDIMMs/ch with CS[7:6] + // routed across all DIMM sockets, BIOS performs the following: + if (FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_NO_LRDIMM_CS67_ROUTING, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, NULL, NULL) != NULL) { + // A. Program D18F2xA8_dct[1:0][CSTimingMux67] = 1. + MemNSetBitFieldNb (NBPtr, BFCSTimingMux67, 1); + // B. Program D18F2x9C_x0D0F_8021_dct[1:0]: + // - DiffTimingEn = 1. + // - IF (D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay] >= + // D18F2x9C_x0D0F_E008_dct[1:0][FenceValue]) THEN Fence = 1 ELSE Fence = 0. + // - Delay = D18F2x9C_x0000_0004_dct[1:0][AddrCmdFineDelay]. + // + MemNSetBitFieldNb (NBPtr, BFDiffTimingEn, 1); + MemNSetBitFieldNb (NBPtr, BFFence, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay) >= MemNGetBitFieldNb (NBPtr, BFFenceValue)) ? 1 : 0); + MemNSetBitFieldNb (NBPtr, BFDelay, (MemNGetBitFieldNb (NBPtr, BFAddrCmdFineDelay))); + } + } + + // 19. Reprogram F2x9C_04. + MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl)); + +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function executes Phy fence training + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNTrainPhyFenceNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 Byte; + INT16 Avg; + UINT8 PREvalue; + + if (MemNGetBitFieldNb (NBPtr, BFDisDramInterface)) { + return; + } + + // 1. BIOS first programs a seed value to the phase recovery + // engine registers. + // + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tSeeds: "); + for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) { + // This includes ECC as byte 8 + MemNSetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte), 19); + IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", 19); + } + + IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tPhyFenceTrEn = 1"); + // 2. Set F2x[1, 0]9C_x08[PhyFenceTrEn]=1. + MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 1); + + if (!NBPtr->IsSupported[UnifiedNbFence]) { + // 3. Wait 200 MEMCLKs. + MemNWaitXMemClksNb (NBPtr, 200); + } else { + // 3. Wait 2000 MEMCLKs. + MemNWaitXMemClksNb (NBPtr, 2000); + } + + // 4. Clear F2x[1, 0]9C_x08[PhyFenceTrEn]=0. + MemNSetBitFieldNb (NBPtr, BFPhyFenceTrEn, 0); + + // 5. BIOS reads the phase recovery engine registers + // F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52. + // 6. Calculate the average value of the fine delay and subtract 8. + // + Avg = 0; + IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t PRE: "); + for (Byte = 0; Byte < MAX_BYTELANES_PER_CHANNEL; Byte++) { + // + // This includes ECC as byte 8. ECC Byte lane (8) is ignored by MemNGetTrainDlyNb function where + // ECC is not supported. + // + PREvalue = (UINT8) (0x1F & MemNGetTrainDlyNb (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (0, Byte))); + Avg = Avg + ((INT16) PREvalue); + IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", PREvalue); + } + Avg = ((Avg + 8) / 9); // round up + + NBPtr->MemNPFenceAdjustNb (NBPtr, &Avg); + + IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\tFence: %02x\n", Avg); + + // 7. Write the value to F2x[1, 0]9C_x0C[PhyFence]. + MemNSetBitFieldNb (NBPtr, BFPhyFence, Avg); + + // 8. BIOS rewrites F2x[1, 0]9C_x04, DRAM Address/Command Timing Control + // Register delays for both channels. This forces the phy to recompute + // the fence. + // + MemNSetBitFieldNb (NBPtr, BFAddrTmgControl, MemNGetBitFieldNb (NBPtr, BFAddrTmgControl)); +} + +/*-----------------------------------------------------------------------------*/ +/** + * + * Returns the parameters for a requested delay value to be used in training + * The correct Min, Max and Mask are determined based on the type of Delay, + * and the frequency + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] TrnDly - Type of delay + * @param[in,out] *Parms - Pointer to the TRN_DLY-PARMS struct + * + */ + +VOID +MemNGetTrainDlyParmsUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN TRN_DLY_TYPE TrnDly, + IN OUT TRN_DLY_PARMS *Parms + ) +{ + Parms->Min = 0; + + if ((TrnDly == AccessWrDatDly) || (TrnDly == AccessRdDqsDly)) { + Parms->Max = 0x1F; + Parms->Mask = 0x01F; + } +} +/*---------------------------------------------------------------------------- + * LOCAL FUNCTIONS + * + *---------------------------------------------------------------------------- + */ +/* -----------------------------------------------------------------------------*/ +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function gets or set DQS timing during training. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] TrnDly - type of delay to be set + * @param[in] DrbnVar - encoding of Dimm-Rank-Byte-Nibble to be accessed + * (use either DIMM_BYTE_ACCESS(dimm,byte) or CS_NBBL_ACCESS(cs,nibble) to use this encoding + * @param[in] Field - Value to be programmed + * @param[in] IsSet - Indicates if the function will set or get + * + * @return value read, if the function is used as a "get" + */ + +UINT32 +MemNcmnGetSetTrainDlyUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 IsSet, + IN TRN_DLY_TYPE TrnDly, + IN DRBN DrbnVar, + IN UINT16 Field + ) +{ + UINT16 Index; + UINT16 Offset; + UINT32 Value; + UINT32 Address; + UINT8 Dimm; + UINT8 Rank; + UINT8 Byte; + UINT8 Nibble; + UINT8 DimmNibble; + + Dimm = DRBN_DIMM (DrbnVar); + Rank = DRBN_RANK (DrbnVar); + Byte = DRBN_BYTE (DrbnVar); + Nibble = DRBN_NBBL (DrbnVar); + DimmNibble = DRBN_DIMM_NBBL (DrbnVar); + + ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay)); + ASSERT (Byte <= ECC_DLY); + if ((Byte == ECC_DLY) && (!NBPtr->MCTPtr->Status[SbEccDimms] || !NBPtr->IsSupported[EccByteTraining])) { + // When ECC is not enabled + if (IsSet) { + // On write, ignore + return 0; + } else { + // On read, redirect to byte 0 to correct fence averaging + Byte = 0; + } + } + + switch (TrnDly) { + case AccessRcvEnDly: + Index = 0x10; + break; + case AccessWrDqsDly: + Index = 0x30; + break; + case AccessWrDatDly: + Index = 0x01; + break; + case AccessRdDqsDly: + Index = 0x05; + break; + case AccessRdDqs2dDly: + Index = 0x00; + break; + case AccessPhRecDly: + Index = 0x50; + break; + default: + Index = 0; + IDS_ERROR_TRAP; + } + + switch (TrnDly) { + case AccessRcvEnDly: + case AccessWrDqsDly: + Index += (Dimm * 3); + if (Byte & 0x04) { + // if byte 4,5,6,7 + Index += 0x10; + } + if (Byte & 0x02) { + // if byte 2,3,6,7 + Index++; + } + if (Byte > 7) { + Index += 2; + } + Offset = 16 * (Byte % 2); + Index |= (Rank << 8); + Index |= (Nibble << 9); + Address = Index; + break; + + case AccessRdDqsDly: + case AccessWrDatDly: + + if (NBPtr->IsSupported[DimmBasedOnSpeed]) { + if (NBPtr->DCTPtr->Timings.Speed < DDR800_FREQUENCY) { + // if DDR speed is below 800, use DIMM 0 delays for all DIMMs. + Dimm = 0; + } + } + + Index += (Dimm * 0x100); + if (Nibble) { + if (Rank) { + Index += 0xA0; + } else { + Index += 0x70; + } + } else if (Rank) { + Index += 0x60; + } + // break is not being used here because AccessRdDqsDly and AccessWrDatDly also need + // to run AccessPhRecDly sequence. + case AccessPhRecDly: + Index += (Byte / 4); + Offset = 8 * (Byte % 4); + Address = Index; + break; + case AccessRdDqs2dDly: + Address = 0x0D0F0000; + Index += (DimmNibble >> 1) * 0x100; + Index += 0x20; + Index = Index + Dimm; + Offset = 4 * ((DimmNibble & 0x01) * 2); + Address += Index; + break; + default: + Offset = 0; + IDS_ERROR_TRAP; + Address = Index; + } + MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); + MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); + Value = MemNGetBitFieldNb (NBPtr, BFDctAddlDataReg); + if (TrnDly == AccessRdDqsDly) { + NBPtr->FamilySpecificHook[AdjustRdDqsDlyOffset] (NBPtr, &Offset); + } + + if (IsSet) { + if (TrnDly == AccessPhRecDly) { + Value = NBPtr->DctCachePtr->PhRecReg[Index & 0x03]; + } + if (TrnDly != AccessRdDqs2dDly) { + Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF) << Offset))); + } else { + Value = ((UINT32)Field << Offset) | (Value & (~((UINT32) 0x1F << Offset))); + } + ASSERT (!NBPtr->IsSupported[ScrubberEn]); // Phy CSR write is not allowed after scrubber is enabled + MemNSetBitFieldNb (NBPtr, BFDctAddlDataReg, Value); + Address |= DCT_ACCESS_WRITE; + MemNSetBitFieldNb (NBPtr, BFDctAddlOffsetReg, Address); + MemNPollBitFieldNb (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, FALSE); + if (TrnDly == AccessPhRecDly) { + NBPtr->DctCachePtr->PhRecReg[Index & 0x03] = Value; + } + } else { + if (TrnDly != AccessRdDqs2dDly) { + Value = (Value >> Offset) & (UINT32) ((TrnDly == AccessRcvEnDly) ? 0x3FF : 0xFF); + } else { + Value = (Value >> Offset) & (UINT32) (0x1F); + } + } + return Value; +} +/* -----------------------------------------------------------------------------*/ +/** + * + * This function initializes the training pattern. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return AGESA_STATUS - Result + * AGESA_SUCCESS - Training pattern is ready to use + * AGESA_ERROR - Unable to initialize the pattern. + */ + +AGESA_STATUS +MemNTrainingPatternInitNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + MEM_TECH_BLOCK *TechPtr; + ALLOCATE_HEAP_PARAMS AllocHeapParams; + TRAIN_PATTERN TrainPattern; + AGESA_STATUS Status; + + TechPtr = NBPtr->TechPtr; + TrainPattern = 0; + // + // Check the training type + // + if (TechPtr->TrainingType == TRN_DQS_POSITION) { + // + // DQS Position Training + // + if (NBPtr->PosTrnPattern == POS_PATTERN_256B) { + // + // 256 Bit pattern + // + if (NBPtr->MCTPtr->Status[Sb128bitmode]) { + TrainPattern = TestPatternJD256B; + TechPtr->PatternLength = 64; + } else { + TrainPattern = TestPatternJD256A; + TechPtr->PatternLength = 32; + } + } else { + // + // 72 bit pattern will be used if PosTrnPattern is not specified + // + if (NBPtr->MCTPtr->Status[Sb128bitmode]) { + TrainPattern = TestPatternJD1B; + TechPtr->PatternLength = 18; + } else { + TrainPattern = TestPatternJD1A; + TechPtr->PatternLength = 9; + } + } + } else if (TechPtr->TrainingType == TRN_MAX_READ_LATENCY) { + // + // Max Read Latency Training + // + TrainPattern = TestPatternML; + TechPtr->PatternLength = (NBPtr->MCTPtr->Status[Sb128bitmode]) ? 6 : 3; + } else { + // + // Error - TechPtr->Training Type must be set to one of the types handled in this function + // + ASSERT (FALSE); + } + // + // Allocate training buffer + // + AllocHeapParams.RequestedBufferSize = (TechPtr->PatternLength * 64 * 2) + 16; + AllocHeapParams.BufferHandle = AMD_MEM_TRAIN_BUFFER_HANDLE; + AllocHeapParams.Persist = HEAP_LOCAL_CACHE; + Status = HeapAllocateBuffer (&AllocHeapParams, &NBPtr->MemPtr->StdHeader); + ASSERT (Status == AGESA_SUCCESS); + if (Status != AGESA_SUCCESS) { + return Status; + } + TechPtr->PatternBufPtr = AllocHeapParams.BufferPtr; + AlignPointerTo16Byte (&TechPtr->PatternBufPtr); + TechPtr->TestBufPtr = TechPtr->PatternBufPtr + (TechPtr->PatternLength * 64); + + // Prepare training pattern + MemUFillTrainPattern (TrainPattern, TechPtr->PatternBufPtr, TechPtr->PatternLength * 64); + + return Status; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function determined the settings for the Reliable Read/Write engine + * for each specific type of training + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] *OptParam - Pointer to an Enum of TRAINING_TYPE + * + * @return TRUE + */ + +BOOLEAN +MemNSetupHwTrainingEngineUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN VOID *OptParam + ) +{ + TRAINING_TYPE TrnType; + RRW_SETTINGS *Rrw; + + TrnType = *(TRAINING_TYPE*) OptParam; + Rrw = &NBPtr->RrwSettings; + // + // Common Settings + // + Rrw->TgtBankAddressA = CPG_BANK_ADDRESS_A; + Rrw->TgtRowAddressA = CPG_ROW_ADDRESS_A; + Rrw->TgtColAddressA = CPG_COL_ADDRESS_A; + Rrw->TgtBankAddressB = CPG_BANK_ADDRESS_B; + Rrw->TgtRowAddressB = CPG_ROW_ADDRESS_B; + Rrw->TgtColAddressB = CPG_COL_ADDRESS_B; + Rrw->CompareMaskHigh = CPG_COMPARE_MASK_HI; + Rrw->CompareMaskLow = CPG_COMPARE_MASK_LOW; + Rrw->CompareMaskEcc = CPG_COMPARE_MASK_ECC; + + switch (TrnType) { + case TRN_RCVR_ENABLE: + // + // Receiver Enable Training + // + NBPtr->TechPtr->PatternLength = 192; + break; + case TRN_MAX_READ_LATENCY: + // + // Max Read Latency Training + // + Rrw->CmdTgt = CMD_TGT_A; + NBPtr->TechPtr->PatternLength = 32; + Rrw->DataPrbsSeed = PRBS_SEED_32; + break; + case TRN_DQS_POSITION: + // + // Read/Write DQS Position training + // + Rrw->CmdTgt = CMD_TGT_AB; + NBPtr->TechPtr->PatternLength = 256; + Rrw->DataPrbsSeed = PRBS_SEED_256; + break; + default: + ASSERT (FALSE); + } + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function finalizes the training pattern. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in] Index - Index of Write Data Delay Value + * @param[in,out] *Value - Write Data Delay Value + * @return BOOLEAN - TRUE - Use the value returned. + * FALSE - No more values in table. + */ + +BOOLEAN +MemNGetApproximateWriteDatDelayNb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN UINT8 Index, + IN OUT UINT8 *Value + ) +{ + CONST UINT8 WriteDatDelayValue[] = {0x10, 0x4, 0x8, 0xC, 0x14, 0x18, 0x1C, 0x1F}; + if (Index < GET_SIZE_OF (WriteDatDelayValue)) { + *Value = WriteDatDelayValue[Index]; + return TRUE; + } + return FALSE; +} + + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function finalizes the training pattern. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return AGESA_STATUS - Result + * AGESA_SUCCESS - Training pattern has been finalized. + * AGESA_ERROR - Unable to initialize the pattern. + */ + +AGESA_STATUS +MemNTrainingPatternFinalizeNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + AGESA_STATUS Status; + // + // Deallocate training buffer + // + Status = HeapDeallocateBuffer (AMD_MEM_TRAIN_BUFFER_HANDLE, &NBPtr->MemPtr->StdHeader); + ASSERT (Status == AGESA_SUCCESS); + return Status; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function returns the number of Chipselects controlled by each set + * of Delay registers under current conditions. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return + */ + +UINT8 +MemNCSPerDelayNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + if (MemNGetBitFieldNb (NBPtr, BFPerRankTimingEn) == 1) { + return 1; + } else { + return 2; + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function returns the minimum data eye width in 32nds of a UI for + * the type of data eye(Rd/Wr) that is being trained. This value will + * be the minimum number of consecutive delays that yield valid data. + * Uses TechPtr->Direction to determine read or write. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return + */ + +UINT8 +MemNMinDataEyeWidthNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + UINT8 MinRdDataeye; + UINT8 MinWrDataeye; + UINT8 *MinRdWrDataeyePtr; + + MinRdWrDataeyePtr = FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MIN_RD_WR_DATAEYE_WIDTH, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID, 0, + &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader)); + + if (NBPtr->TechPtr->Direction == DQS_READ_DIR) { + if (MinRdWrDataeyePtr != NULL) { + MinRdDataeye = MinRdWrDataeyePtr[0]; + return MinRdDataeye; + } else { + return MIN_RD_DATAEYE_WIDTH_NB; + } + } else { + if (MinRdWrDataeyePtr != NULL) { + MinWrDataeye = MinRdWrDataeyePtr[1]; + return MinWrDataeye; + } else { + return MIN_WR_DATAEYE_WIDTH_NB; + } + } +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function programs the phy registers according to the desired phy VDDIO voltage level + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + */ + +VOID +MemNPhyVoltageLevelNb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + BIT_FIELD_NAME BitField; + BIT_FIELD_NAME BFEnd; + UINT16 BFValue; + UINT16 RegValue; + + BFValue = (UINT16) CONVERT_VDDIO_TO_ENCODED (NBPtr->RefPtr->DDR3Voltage) << 3; + BFEnd = NBPtr->IsSupported[ProgramCsrComparator] ? BFCsrComparator : BFCmpVioLvl; + + for (BitField = BFDataRxVioLvl; BitField <= BFEnd; BitField++) { + RegValue = BFValue; + if (BitField == BFCsrComparator) { + RegValue >>= (3 - 2); + // Setting this bit in DCT0 adjusts the comparator for DCT0 and DCT1. Setting this bit in DCT1 has no effect. + NBPtr->SwitchDCT (NBPtr, 0); + MemNSetBitFieldNb (NBPtr, BitField, RegValue); + break; + } else if (BitField == BFCmpVioLvl) { + RegValue <<= (14 - 3); + // Must set this bit on DCT0 even when DCT0 has no memory + NBPtr->SwitchDCT (NBPtr, 0); + MemNSetBitFieldNb (NBPtr, BitField, RegValue); + } + MemNBrdcstSetNb (NBPtr, BitField, RegValue); + } + // Program D18F2x9C_x0D0F_4006_dct[0][VrefSel] = 0. + MemNSetBitFieldNb (NBPtr, BFObsrvVrefSel, 0); + // Program D18F2x9C_x0D0F_4007_dct[0] per platform requirements. + NBPtr->FamilySpecificHook[PhyInitVref] (NBPtr, NULL); +} + +/*----------------------------------------------------------------------------- + * + * + * This function calculates the value of WrDqDqsEarly and programs it into + * the DCT and adds it to the WrDqsGrossDelay of each byte lane on each + * DIMM of the channel. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNCalcWrDqDqsEarlyUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + MEM_TECH_BLOCK *TechPtr; + DCT_STRUCT *DCTPtr; + CH_DEF_STRUCT *ChannelPtr; + UINT8 Dimm; + UINT8 ByteLane; + UINT8 *WrDqsDlysPtr; + UINT8 WrDqDqsEarly; + UINT8 ChipSel; + + ASSERT ((NBPtr->IsSupported[WLSeedAdjust]) && (NBPtr->IsSupported[WLNegativeDelay])); + + TechPtr = NBPtr->TechPtr; + ChannelPtr = NBPtr->ChannelPtr; + DCTPtr = NBPtr->DCTPtr; + + ASSERT (NBPtr != NULL); + ASSERT (ChannelPtr != NULL); + ASSERT (DCTPtr != NULL); + // + // For each DIMM: + // - The Critical Gross Delay (CGD) is the minimum GrossDly of all byte lanes and all DIMMs. + // - If (CGD < 0) Then + // - D18F2xA8_dct[1:0][WrDqDqsEarly] = ABS(CGD) + // - WrDqsGrossDly = GrossDly + WrDqDqsEarly + // - Else + // - D18F2xA8_dct[1:0][WrDqDqsEarly] = 0. + // - WrDqsGrossDly = GrossDly + // + WrDqDqsEarly = 0; + if (TechPtr->WLCriticalDelay < 0) { + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tCalculating WrDqDqsEarly, adjusting WrDqs.\n"); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tMin. Critical Delay: %x\n", TechPtr->WLCriticalDelay); + // We've saved the entire negative delay value, so take the ABS and convert to GrossDly. + WrDqDqsEarly = (UINT8) (0x00FF &((((ABS (TechPtr->WLCriticalDelay)) + 0x1F) / 0x20))); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\tWrDqDqsEarly : %02x\n\n", WrDqDqsEarly); + // + // Loop through All WrDqsDlys on all DIMMs + // + for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) { + if ((NBPtr->MCTPtr->Status[SbLrdimms]) ? ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0) : + ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0)) { + // + // If LRDIMMs, only include the physical dimms, not logical Dimms + // + IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS %x:", ChipSel); + Dimm = ChipSel / NBPtr->CsPerDelay; + + WrDqsDlysPtr = &(ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ())]); + for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { + WrDqsDlysPtr[ByteLane] += (WrDqDqsEarly << 5); + NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDlysPtr[ByteLane]); + IDS_HDT_CONSOLE (MEM_FLOW, " %02x", WrDqsDlysPtr[ByteLane]); + } + IDS_HDT_CONSOLE (MEM_FLOW, "\n"); + } + } + } + MemNSetBitFieldNb (NBPtr, BFWrDqDqsEarly, WrDqDqsEarly); + return TRUE; +} + +/*----------------------------------------------------------------------------- + * + * + * This function forces phy to M0 state + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return none + * ---------------------------------------------------------------------------- + */ +VOID +MemNForcePhyToM0Unb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + IDS_SKIP_HOOK (IDS_FORCE_PHY_TO_M0, NBPtr, &(NBPtr->MemPtr->StdHeader)) { + // 1. Program D18F2x9C_x0D0F_E013_dct[1:0] = 0118h. + MemNBrdcstSetUnConditionalNb (NBPtr, BFPllRegWaitTime, 0x118); + // 2. For each byte lane and each memory P-state: Program D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxSsbMntClkEn] = 0. + MemNBrdcstSetUnConditionalNb (NBPtr, BFRxSsbMntClkEn, 0); + // 3. D18F2xA8_dct[1:0][MemPhyPllPdMode] = 00b. + MemNBrdcstSetUnConditionalNb (NBPtr, BFMemPhyPllPdMode, 0); + // 4. Force the phy to M0 with the following sequence: + // A. Program D18F2x9C_x0D0F_E006_dct[1:0][PllLockTime] = 190h. Restore the default PLL lock time. + MemNBrdcstSetUnConditionalNb (NBPtr, BFPllLockTime, NBPtr->FreqChangeParam->PllLockTimeDefault); + // B. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80800000h. + MemNBrdcstSetUnConditionalNb (NBPtr, BFDramPhyStatusReg, 0x80800000); + NBPtr->SwitchDCT (NBPtr, 0); + // C. Program D18F2x9C_x0D0F_E018_dct[0][PhyPSMasterChannel] = 0. + MemNSetBitFieldNb (NBPtr, BFPhyPSMasterChannel, 0); + // D. Program D18F2x9C_x0000_000B_dct[0] = 40000000h. CH0 only; + MemNSetBitFieldNb (NBPtr, BFDramPhyStatusReg, 0x40000000); + // E. For each DCT: Program D18F2x9C_x0000_000B_dct[1:0] = 80000000h. + MemNBrdcstSetUnConditionalNb (NBPtr, BFDramPhyStatusReg, 0x80000000); + } +} + +/*----------------------------------------------------------------------------- + * + * + * This function sets SkewMemClk before enabling MemClk + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *OptParam - Optional parameter + * + * @return TRUE - always + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNSetSkewMemClkUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + UINT8 Dct; + + // SkewMemClk is set to 1 if all DCTs are enabled, else 0. + for (Dct = 0; Dct < NBPtr->DctCount; Dct++) { + MemNSwitchDCTNb (NBPtr, Dct); + if (NBPtr->DCTPtr->Timings.DctMemSize == 0) { + break; + } + } + MemNSwitchDCTNb (NBPtr, 0); + if (Dct == NBPtr->DctCount) { + MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0x10); + } else { + MemNSetBitFieldNb (NBPtr, BFSkewMemClk, 0); + } + + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function masks the RdDqsDly Bit 0 before writing to register for UNB. + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *Offset - Bit offset of the field to be programmed + * + * @return TRUE + */ +BOOLEAN +MemNAdjustRdDqsDlyOffsetUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *Offset + ) +{ + *(UINT16*) Offset = *(UINT16*) Offset + 1; + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function initializes RxEn Delays for RxEn seedless training + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNInitializeRxEnSeedlessTrainingUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + UINT8 ByteLane; + // Save original PRE based RxEnDly for RxEn Seedless training + for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { + NBPtr->TechPtr->RxOrig[ByteLane] = NBPtr->ChannelPtr->RcvEnDlys[(NBPtr->TechPtr->ChipSel / NBPtr->CsPerDelay) * NBPtr->TechPtr->DlyTableWidth () + ByteLane]; + } + return TRUE; +} +/*----------------------------------------------------------------------------- + * + * + * This function checks each bytelane for no window error. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNTrackRxEnSeedlessRdWrNoWindBLErrorUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + MemTTrackRxEnSeedlessRdWrNoWindBLError (NBPtr->TechPtr, OptParam); + return TRUE; +} +/*----------------------------------------------------------------------------- + * + * + * This function checks each bytelane for small window error. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNTrackRxEnSeedlessRdWrSmallWindBLErrorUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + MemTTrackRxEnSeedlessRdWrSmallWindBLError (NBPtr->TechPtr, OptParam); + return TRUE; +} +/*----------------------------------------------------------------------------- + * + * + * This function initializes a ByteLaneError error. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNInitialzeRxEnSeedlessByteLaneErrorUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + UINT8 ByteLane; + for (ByteLane = 0; ByteLane < (NBPtr->MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) { + NBPtr->TechPtr->ByteLaneError[ByteLane] = FALSE; // All Bytelanes have no errors + } + return TRUE; +} +/* -----------------------------------------------------------------------------*/ +/** + * + * + * This function sets phy power saving related settings in different MPstate context. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return none + * ---------------------------------------------------------------------------- + */ +VOID +MemNPhyPowerSavingMPstateUnb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + STATIC UINT8 Sequence[] = {8, 4, 3, 5, 2, 6, 1, 7, 0}; + UINT16 DllPower[9]; + UINT8 NumLanes; + UINT8 DllWakeTime; + UINT8 MaxRxStggrDly; + UINT8 MinRcvEnGrossDly; + UINT8 MinWrDatGrossDly; + UINT8 dRxStggrDly; + UINT8 dTxStggrDly; + UINT8 TempStggrDly; + UINT8 MaxTxStggrDly; + UINT8 Tcwl; + UINT8 i; + + IDS_HDT_CONSOLE (MEM_FLOW, "Start Phy power saving setting for memory Pstate %d\n", NBPtr->MemPstate); + // 4. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyU] = 1b. + // 5. Program D18F2x9C_x0D0F_0[F,8:0]13_dct[1:0][DllDisEarlyL] = 1b. + // 6. D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0][RxDqsUDllPowerDown] = 1. + MemNSetBitFieldNb (NBPtr, BFPhy0x0D0F0F13, MemNGetBitFieldNb (NBPtr, BFPhy0x0D0F0F13) | 0x83); + // 7. D18F2x9C_x0D0F_812F_dct[1:0][PARTri] = ~D18F2x90_dct[1:0][ParEn]. + // 8. D18F2x9C_x0D0F_812F_dct[1:0][Add17Tri, Add16Tri] = {1b, 1b} + if (NBPtr->MemPstate == MEMORY_PSTATE0) { + MemNSetBitFieldNb (NBPtr, BFAddrCmdTri, MemNGetBitFieldNb (NBPtr, BFAddrCmdTri) | 0xA1); + } + // 9. IF (DimmsPopulated == 1)&& ((D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==010b) || + // (D18F2x9C_x0000_0000_dct[1:0]_mp[1:0][CkeDrvStren]==011b)) THEN THEN + // program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 1 + // ELSE program D18F2x9C_x0D0F_C0[40,00]_dct[1:0][LowPowerDrvStrengthEn] = 0 ENDIF. + if ((NBPtr->ChannelPtr->Dimms == 1) && ((MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 2) || (MemNGetBitFieldNb (NBPtr, BFCkeDrvStren) == 3))) { + MemNSetBitFieldNb (NBPtr, BFLowPowerDrvStrengthEn, 0x100); + } + // 10. Program D18F2x9C_x0D0F_0[F,7:0][50,10]_dct[1:0][EnRxPadStandby] = IF + // (D18F2x94_dct[1:0][MemClkFreq] <= 800 MHz) THEN 1 ELSE 0 ENDIF. + MemNSetBitFieldNb (NBPtr, BFEnRxPadStandby, (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) ? 0x1000 : 0); + // 11. Program D18F2x9C_x0000_000D_dct[1:0]_mp[1:0] as follows: + // If (DDR rate < = 1600) TxMaxDurDllNoLock = RxMaxDurDllNoLock = 8h + // else TxMaxDurDllNoLock = RxMaxDurDllNoLock = 7h. + if (NBPtr->DCTPtr->Timings.Speed <= DDR1600_FREQUENCY) { + MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 8); + MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 8); + } else { + MemNSetBitFieldNb (NBPtr, BFTxMaxDurDllNoLock, 7); + MemNSetBitFieldNb (NBPtr, BFRxMaxDurDllNoLock, 7); + } + // TxCPUpdPeriod = RxCPUpdPeriod = 011b. + MemNSetBitFieldNb (NBPtr, BFTxCPUpdPeriod, 3); + MemNSetBitFieldNb (NBPtr, BFRxCPUpdPeriod, 3); + // TxDLLWakeupTime = RxDLLWakeupTime = 11b. + MemNSetBitFieldNb (NBPtr, BFTxDLLWakeupTime, 3); + MemNSetBitFieldNb (NBPtr, BFRxDLLWakeupTime, 3); + + if (NBPtr->IsSupported[DllStaggerEn]) { + // 12. Program D18F2x9C_x0D0F_0[F,7:0][5C,1C]_dct[1:0] as follows. + // Let Numlanes = 8. = 9 with ECC. + NumLanes = (NBPtr->MCTPtr->Status[SbEccDimms] && NBPtr->IsSupported[EccByteTraining]) ? 9 : 8; + // RxDllStggrEn = TxDllStggrEn = 1. + for (i = 0; i < 9; i ++) { + DllPower[i] = 0x8080; + } + // If (DDR rate > = 1866) DllWakeTime = 1, Else DllWakeTime = 0. + DllWakeTime = (NBPtr->DCTPtr->Timings.Speed >= DDR1866_FREQUENCY) ? 1 : 0; + // Let MaxRxStggrDly = (Tcl*2) + MIN(DqsRcvEnGrossDelay for all byte lanes (see D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4. + MinRcvEnGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessRcvEnDly, FALSE); + ASSERT ((NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly) >= 4); + MaxRxStggrDly = NBPtr->DCTPtr->Timings.CasL * 2 + MinRcvEnGrossDly - 4; + // Let (real) dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (Numlanes - 1). + ASSERT (MaxRxStggrDly >= DllWakeTime); + dRxStggrDly = (MaxRxStggrDly - DllWakeTime) / (NumLanes - 1); + IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum RcvEnGrossDly: 0x%02x MaxRxStggrDly: 0x%02x dRxStggrDly: 0x%02x\n", MinRcvEnGrossDly, MaxRxStggrDly, dRxStggrDly); + // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program RxDllStggrDly[5:0] = an + // increasing value, starting with 0 for the first byte lane in the sequence and increasing at a rate of dRxStggrDly + // for each subsequent byte lane. Convert the real to integer by rounding down or using C (int) typecast after linearization. + i = 9 - NumLanes; + TempStggrDly = 0; + for (; i < 9; i ++) { + DllPower[Sequence[i]] |= ((TempStggrDly & 0x3F) << 8); + TempStggrDly = TempStggrDly + dRxStggrDly; + } + + // Let MaxTxStggrDly = (Tcwl*2) + MIN(MIN (WrDatGrossDly for all byte lanes (see + // D18F2x9C_x0000_0[3:0]0[2:1]_dct[1:0]_mp[1:0])), MIN(DqsRcvEnGrossDelay for all byte lanes (see + // D18F2x9C_x0000_00[2A:10]_dct[1:0]_mp[1:0])) - 4. + Tcwl = (UINT8) MemNGetBitFieldNb (NBPtr, BFTcwl); + MinWrDatGrossDly = NBPtr->TechPtr->GetMinMaxGrossDly (NBPtr->TechPtr, AccessWrDatDly, FALSE); + MaxTxStggrDly = Tcwl * 2 + MIN (MinRcvEnGrossDly, MinWrDatGrossDly) - 4; + // Let dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (Numlanes - 1). + ASSERT (MaxTxStggrDly >= DllWakeTime); + dTxStggrDly = (MaxTxStggrDly - DllWakeTime) / (NumLanes - 1); + // For each byte lane in the ordered sequence {8, 4, 3, 5, 2, 6, 1, 7, 0}, program TxDllStggrDly[5:0] = an + // increasing integer value, starting with 0 for the first byte lane in the sequence and increasing at a rate of + // dTxStggrDly for each subsequent byte lane. + IDS_HDT_CONSOLE (MEM_FLOW, "\tMinimum WrDatGrossDly: 0x%02x MaxTxStggrDly: 0x%02x dTxStggrDly: 0x%02x\n", MinWrDatGrossDly, MaxTxStggrDly, dTxStggrDly); + i = 9 - NumLanes; + TempStggrDly = 0; + for (; i < 9; i ++) { + DllPower[Sequence[i]] |= (TempStggrDly & 0x3F); + TempStggrDly = TempStggrDly + dTxStggrDly; + } + + IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tByte Lane : ECC 07 06 05 04 03 02 01 00\n"); + IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t\tDll Power : %04x %04x %04x %04x %04x %04x %04x %04x %04x\n", + DllPower[8], DllPower[7], DllPower[6], DllPower[5], DllPower[4], DllPower[3], DllPower[2], DllPower[1], DllPower[0]); + + for (i = 0; i < NumLanes; i ++) { + MemNSetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i, (MemNGetBitFieldNb (NBPtr, BFDataByteDllPowerMgnByte0 + i) & 0x4040) | DllPower[i]); + } + } + // 13. Program D18F2x248_dct[1:0]_mp[1:0] and then D18F2x9C_x0D0F_0[F,7:0][53,13]_dct[1:0] as follows: + // For M1 context program RxChMntClkEn=RxSsbMntClkEn=0. + // For M0 context program RxChMntClkEn=RxSsbMntClkEn=1. + if (NBPtr->MemPstate == MEMORY_PSTATE1 || NBPtr->IsSupported[RxChnMntClksEn] == FALSE) { + MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 0); + MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0); + } else { + MemNSetBitFieldNb (NBPtr, BFRxChMntClkEn, 1); + MemNSetBitFieldNb (NBPtr, BFRxSsbMntClkEn, 0x100); + } + + IDS_OPTION_HOOK (IDS_PHY_DLL_STANDBY_CTRL, NBPtr, &NBPtr->MemPtr->StdHeader); +} + +/* -----------------------------------------------------------------------------*/ +/** + * This function adjusts the Phase Mask based on ECC. + * + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] OptParam - Optional parameter + * + * @return TRUE + * ---------------------------------------------------------------------------- + */ +BOOLEAN +MemNAdjust2DPhaseMaskBasedOnEccUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + NBPtr->PhaseLaneMask = NBPtr->PhaseLaneMask & (UINT32) (NBPtr->MCTPtr->Status[SbEccDimms] ? 0x0FFFF : 0x3FFFF); + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function adjusts WrDqsBias before seed scaling + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *WrDqsBias - Pointer to WrDqsBias + * + * @return FALSE - Supported + * @return TRUE - Not supported + */ + +BOOLEAN +MemNAdjustWrDqsBeforeSeedScalingUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *WrDqsBias + ) +{ + // Subtract (0x20 * WrDqDqsEarly) since it is a non-scalable component + * (INT16 *) WrDqsBias = (INT16) (0x20 * MemNGetBitFieldNb (NBPtr, BFWrDqDqsEarly)); + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * + * This function adjust RdDqsDly used for MaxRdLatency calculation + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * @param[in,out] *OptParam - Optional parameter + * + * @return FALSE - Supported + * @return TRUE - Not supported + */ + +BOOLEAN +MemNAdjustRdDqsDlyForMaxRdLatUnb ( + IN OUT MEM_NB_BLOCK *NBPtr, + IN OUT VOID *OptParam + ) +{ + // Set RdDqsDlyForMaxRdLat to 0 so that actual RdDqsDly is used for MaxRdLatency calculation + NBPtr->RdDqsDlyForMaxRdLat = 0; + return TRUE; +} + +/* -----------------------------------------------------------------------------*/ +/** + * This function collects data for Eye Rim Search + * + * @param[in,out] *NBPtr - Pointer to the MEM_NB_BLOCK + * + * @return TRUE - No Errors occurred + * @return FALSE - Errors occurred + */ +BOOLEAN +MemN2DRdDQSEyeRimSearchUnb ( + IN OUT MEM_NB_BLOCK *NBPtr + ) +{ + return MemT2DRdDQSEyeRimSearch (NBPtr->TechPtr); +} |