diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f12/Proc/Fch/Usb')
27 files changed, 0 insertions, 2843 deletions
diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciEnv.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciEnv.c deleted file mode 100644 index 72d2fe4b08..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciEnv.c +++ /dev/null @@ -1,60 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_EHCIENV_FILECODE - -/** - * FchInitEnvUsbEhci - Config USB EHCI controller before PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitEnvUsbEhci ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciLate.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciLate.c deleted file mode 100644 index 98daf4a788..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciLate.c +++ /dev/null @@ -1,60 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_EHCILATE_FILECODE - -/** - * FchInitLateUsbEhci - Config USB EHCI controller before OS - * boot - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitLateUsbEhci ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciMid.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciMid.c deleted file mode 100644 index b651022af3..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciMid.c +++ /dev/null @@ -1,159 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_EHCIMID_FILECODE - -extern VOID FchEhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); -// -// Declaration of local functions -// -/** - * EhciInitAfterPciInit - Config USB controller after PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] FchDataPtr Fch configuration structure pointer. - */ -VOID EhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); - -/** - * FchInitMidUsbEhci - Config USB EHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbEhci ( - IN VOID *FchDataPtr - ) -{ - FCH_DATA_BLOCK *LocalCfgPtr; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - - FchInitMidUsbEhci1 (LocalCfgPtr); - FchInitMidUsbEhci2 (LocalCfgPtr); - FchInitMidUsbEhci3 (LocalCfgPtr); -} - -/** - * FchInitMidUsbEhci1 - Config USB1 EHCI controller after PCI emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbEhci1 ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT32 DeviceId; - - DeviceId = (USB1_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (DeviceId, FchDataPtr); - -} - -/** - * FchInitMidUsbEhci2 - Config USB2 EHCI controller after PCI emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbEhci2 ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT32 DeviceId; - - DeviceId = (USB2_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (DeviceId, FchDataPtr); - -} - -/** - * FchInitMidUsbEhci3 - Config USB3 EHCI controller after PCI emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ - -VOID -FchInitMidUsbEhci3 ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT32 DeviceId; - - DeviceId = (USB3_EHCI_BUS_DEV_FUN << 16); - EhciInitAfterPciInit (DeviceId, FchDataPtr); - -} - -/** - * EhciInitAfterPciInit - Config EHCI controller after PCI - * emulation - * - * - * @param[in] Value EHCI Controler info. - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -EhciInitAfterPciInit ( - IN UINT32 Value, - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - FchEhciInitAfterPciInit ( Value, FchDataPtr); -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciReset.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciReset.c deleted file mode 100644 index 5b93b11600..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/EhciReset.c +++ /dev/null @@ -1,77 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch Ehci controller - * - * Init Ehci Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_EHCIRESET_FILECODE - -/** - * FchInitResetEhci - Config Ehci controller during Power-On - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitResetEhci ( - IN VOID *FchDataPtr - ) -{ -} - -/** - * FchInitRecoveryLpc - Config Ehci controller during Crisis - * Recovery - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitRecoveryEhci ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciEnvService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciEnvService.c deleted file mode 100644 index 7e061c806b..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciEnvService.c +++ /dev/null @@ -1,44 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIENVSERVICE_FILECODE diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciLateService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciLateService.c deleted file mode 100644 index 9f59a8b62b..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciLateService.c +++ /dev/null @@ -1,47 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCILATESERVICE_FILECODE -// -// Declaration of local functions -// diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciMidService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciMidService.c deleted file mode 100644 index c79064e9d5..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2EhciMidService.c +++ /dev/null @@ -1,179 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB EHCI controller - * - * Init USB EHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 47163 $ @e \$Date: 2011-02-16 07:23:13 +0800 (Wed, 16 Feb 2011) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2EHCIMIDSERVICE_FILECODE -// -// Declaration of local functions -// - -/** - * FchEhciInitAfterPciInit - Config USB controller after PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] FchDataPtr Fch configuration structure pointer. - */ -VOID -FchEhciInitAfterPciInit ( - IN UINT32 Value, - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT32 BarAddress; - UINT32 Var; - - // - //Get BAR address - // - ReadPci ((UINT32) Value + FCH_EHCI_REG10, AccessWidth32, &BarAddress, FchDataPtr->StdHeader); - if ( (BarAddress != - 1) && (BarAddress != 0) ) { - // - //Enable Memory access - // - RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, BIT1, FchDataPtr->StdHeader); - if (FchDataPtr->Usb.EhciSsid != NULL ) { - RwPci ((UINT32) Value + FCH_EHCI_REG2C, AccessWidth32, 0x00, FchDataPtr->Usb.EhciSsid, FchDataPtr->StdHeader); - } - // - //USB Common PHY CAL & Control Register setting - // - Var = 0x00020F00; - WriteMem (BarAddress + FCH_EHCI_BAR_REGC0, AccessWidth32, &Var); - // - // IN AND OUT DATA PACKET FIFO THRESHOLD - // EHCI BAR 0xA4 //IN threshold bits[7:0]=0x40 //OUT threshold bits[23:16]=0x40 - // - RwMem (BarAddress + FCH_EHCI_BAR_REGA4, AccessWidth32, 0xFF00FF00, 0x00400040); - // - // EHCI Dynamic Clock Gating Feature - // Enable Global Clock Gating (BIT14) - // - RwMem (BarAddress + FCH_EHCI_BAR_REGBC, AccessWidth32, ~( BIT12 + BIT14), BIT12 + BIT14); - RwMem (BarAddress + FCH_EHCI_BAR_REGB0, AccessWidth32, ~BIT5, BIT5); - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth16, ~BIT12, BIT12); - // - // Enable adding extra flops to PHY rsync path - // Step 1: - // EHCI_BAR 0xB4 [6] = 1 - // EHCI_BAR 0xB4 [7] = 0 - // EHCI_BAR 0xB4 [12] = 0 ("VLoad") - // All other bit field untouched - // Step 2: - // EHCI_BAR 0xB4[12] = 1 - // - // USB 2.0 Ports Driving Strength - // Step1 is done by default - // Step2 - RwMem (BarAddress + FCH_EHCI_BAR_REGB4, AccessWidth32, ~BIT12, BIT12); - // Step3 - RwMem (BarAddress + FCH_EHCI_BAR_REGC4, AccessWidth32, (UINT32) (~ 0x00000f00), 0x00000200); - RwMem (BarAddress + FCH_EHCI_BAR_REGC0, AccessWidth32, (UINT32) (~ 0x0000ff00), 0x00000f00); - - //Set EHCI_pci_configx50[6]='1' to disable EHCI MSI support - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~ ((UINT32) (0x01 << 6)), (UINT32) (0x01 << 6), FchDataPtr->StdHeader); - // EHCI Async Park Mode - //Set EHCI_pci_configx50[11:8]=0x1 - //Set EHCI_pci_configx50[15:12]=0x1 - //Set EHCI_pci_configx50[17]=0x1 - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~ ((UINT32) (0x0F << 8)), (UINT32) (0x01 << 8), FchDataPtr->StdHeader); - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~ ((UINT32) (0x0F << 12)), (UINT32) (0x01 << 12), FchDataPtr->StdHeader); - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~ ((UINT32) (0x01 << 17)), (UINT32) (0x01 << 17), FchDataPtr->StdHeader); - - // Enabling EHCI Async Stop Enhancement - //Set EHCI_pci_configx50[29]='1' to disableEnabling EHCI Async Stop Enhancement - // - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~ ((UINT32) (0x01 << 29)), (UINT32) (0x01 << 29), FchDataPtr->StdHeader); - // - // recommended setting "EHCI Advance PHY Power Savings" - // Set EHCI_pci_configx50[31]='1' - // Fix for EHCI controller driver yellow sign issue under device manager - // when used in conjunction with HSET tool driver. EHCI PCI config 0x50[20]=1 - // Disable USB data cache to resolve USB controller hang issue with Lan adaptor. - // EHCI PCI config register 50h bit 26 to `1'. - // - RwPci ((UINT32) Value + FCH_EHCI_REG50 + 2, AccessWidth16, (UINT16)0xFFFF, BIT16 + BIT10, FchDataPtr->StdHeader); - // - // USB Delay A-Link Express L1 State - // PING Response Fix Enable EHCI_PCI_Config x54[1] = 1 - // Enable empty list mode. x54[3] - // Enable "L1 Early Exit" functionality. 0x54 [6:5] = 0x3 0x54 [9:7] = 0x4 - // EHCI PING Response Fix Enable 0x54 [1] = 0x1 - // - RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth32, ~BIT0, 0x0000026b, FchDataPtr->StdHeader); - if ( FchDataPtr->Usb.UsbMsiEnable) { - RwPci ((UINT32) Value + FCH_EHCI_REG50, AccessWidth32, ~BIT6, 0x00, FchDataPtr->StdHeader); - } - // Long Delay on Framelist Read Causing EHCI DMA to Address 0 - Fix - // RWPCI ((UINT32) Value + FCH_EHCI_REG54, AccWidthUint32 | S3_SAVE, ~BIT13, BIT13); - // LS connection can't wake up system from S3/S4/S5 when EHCI owns the port - Fix - RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth32, ~BIT4, BIT4, FchDataPtr->StdHeader); - // EHCI lMU Hangs when Run/Stop is Set First and PDC is Enabled Near End uFrame 7 - Fix Enable - RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth32, ~BIT11, BIT11, FchDataPtr->StdHeader); - // RPR 7.25 SB02674 - RwPci ((UINT32) Value + FCH_EHCI_REG54, AccessWidth16, (UINT16)0x5FFF, BIT13 + BIT15, FchDataPtr->StdHeader); - // RPR 7.26 SB02684 - RwPci ((UINT32) Value + FCH_EHCI_REG50 + 2, AccessWidth16, ~BIT3, BIT3, FchDataPtr->StdHeader); - // RPR 7.26 SB02687 - RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFFC, BIT0 + BIT1, FchDataPtr->StdHeader); - // RPR 7.28 SB02700 - RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFFB, BIT2, FchDataPtr->StdHeader); - // RPR 7.29 SB02703 - RwPci ((UINT32) Value + FCH_EHCI_REG54 + 2, AccessWidth16, (UINT16)0xFFF7, BIT3, FchDataPtr->StdHeader); - } else { - // - // Fake Bar - // - BarAddress = FCH_FAKE_USB_BAR_ADDRESS; - WritePci ((UINT32) Value + FCH_EHCI_REG10, AccessWidth32, &BarAddress, FchDataPtr->StdHeader); - // - //Enable Memory access - // - RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, BIT1, FchDataPtr->StdHeader); - // - // Enable Global Clock Gating (BIT14) - // - RwMem (BarAddress + FCH_EHCI_BAR_REGBC, AccessWidth32, ~( BIT12 + BIT14), BIT12 + BIT14); - RwMem (BarAddress + FCH_EHCI_BAR_REGB0, AccessWidth32, ~BIT5, BIT5); - RwPci ((UINT32) Value + FCH_EHCI_REG04, AccessWidth8, 0, 0, FchDataPtr->StdHeader); - } -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciEnvService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciEnvService.c deleted file mode 100644 index 73547cb810..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciEnvService.c +++ /dev/null @@ -1,47 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIENVSERVICE_FILECODE -// -// Declaration of local functions -// diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciLateService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciLateService.c deleted file mode 100644 index f316234e91..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciLateService.c +++ /dev/null @@ -1,48 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCILATESERVICE_FILECODE -// -// Declaration of local functions -// - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciMidService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciMidService.c deleted file mode 100644 index cb4cdd2b65..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2OhciMidService.c +++ /dev/null @@ -1,105 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 47163 $ @e \$Date: 2011-02-16 07:23:13 +0800 (Wed, 16 Feb 2011) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2OHCIMIDSERVICE_FILECODE -// -// Declaration of local functions -// - -/** - * FchOhciInitAfterPciInit - Config USB OHCI controller after - * PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] FchDataPtr Fch configuration structure pointer. - */ -VOID -FchOhciInitAfterPciInit ( - IN UINT32 Value, - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - // - // Disable the MSI capability of USB host controllers - // - RwPci ((UINT32) Value + FCH_OHCI_REG40 + 1, AccessWidth8, 0xFF, BIT0, FchDataPtr->StdHeader); - RwPci ((UINT32) Value + FCH_OHCI_REG50, AccessWidth8, ~(BIT0 + BIT5 + BIT12), BIT0, FchDataPtr->StdHeader); - // - // USB SMI Handshake - // - RwPci ((UINT32) Value + FCH_OHCI_REG50 + 1, AccessWidth8, ~BIT4, 0x00, FchDataPtr->StdHeader); - - if (Value != (USB4_OHCI_BUS_DEV_FUN << 16)) { - if ( FchDataPtr->Usb.OhciSsid != NULL ) { - RwPci ((UINT32) Value + FCH_OHCI_REG2C, AccessWidth32, 0x00, FchDataPtr->Usb.OhciSsid, FchDataPtr->StdHeader); - } - } - // - // recommended setting to, enable fix to cover the corner case S3 wake up issue from some USB 1.1 devices - //OHCI 0_PCI_Config 0x50[30] = 1 - // - RwPci ((UINT32) Value + FCH_OHCI_REG50 + 3, AccessWidth8, ~BIT6, BIT6, FchDataPtr->StdHeader); - // - // L1 Early Exit - // Set OHCI Arbiter Mode. - // Set Enable Global Clock Gating. - // - RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth8, ~(BIT0 + BIT4 + BIT5 + BIT6 + BIT7), BIT0 + BIT4 + BIT7, FchDataPtr->StdHeader); - // - // Enable OHCI SOF Synchronization. - // Enable OHCI Periodic List Advance. - // - RwPci ((UINT32) Value + FCH_OHCI_REG50 + 2, AccessWidth8, ~(BIT3 + BIT4), BIT3 + BIT4, FchDataPtr->StdHeader); - if ( FchDataPtr->Usb.UsbMsiEnable) { - RwPci ((UINT32) Value + FCH_OHCI_REG40 + 1, AccessWidth8, ~BIT0, 0x00, FchDataPtr->StdHeader); - RwPci ((UINT32) Value + FCH_OHCI_REG50, AccessWidth8, ~BIT5, BIT5, FchDataPtr->StdHeader); - } - // full-speed false crc errors detected. Issue - fix enable - RwPci ((UINT32) Value + FCH_OHCI_REG80, AccessWidth32, (UINT32) (~(0x01 << 10)), (UINT32) (0x01 << 10), FchDataPtr->StdHeader); - // SB02643 - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGB4, AccessWidth8, ~BIT7, BIT7); - // RPR 7.27 SB02686 - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGED, AccessWidth8, ~BIT2, BIT2); - // SB02698 - RwPci ((UINT32) Value + FCH_OHCI_REG50, AccessWidth8, ~BIT0, BIT0, FchDataPtr->StdHeader); -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciEnvService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciEnvService.c deleted file mode 100644 index cdcc556318..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciEnvService.c +++ /dev/null @@ -1,325 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 48230 $ @e \$Date: 2011-03-05 06:55:12 +0800 (Sat, 05 Mar 2011) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIENVSERVICE_FILECODE - -// -// Declaration of local functions -// - -/** - * FchXhciInitIndirectReg - Config XHCI Indirect Registers - * - * - * - * @param[in] StdHeader AMD Standard Header - * - */ -VOID -FchXhciInitIndirectReg ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - // - // SuperSpeed PHY Configuration (adaptation mode setting) - // - RwXhciIndReg ( FCH_XHCI_IND_REG94, 0xFFFFFC00, 0x00000021, StdHeader); - RwXhciIndReg ( FCH_XHCI_IND_REGD4, 0xFFFFFC00, 0x00000021, StdHeader); - // - // SuperSpeed PHY Configuration (CR phase and frequency filter settings) - // - RwXhciIndReg ( FCH_XHCI_IND_REG98, 0xFFFFFFC0, 0x0000000A, StdHeader); - RwXhciIndReg ( FCH_XHCI_IND_REGD8, 0xFFFFFFC0, 0x0000000A, StdHeader); - // - // BLM Meaasge - // - RwXhciIndReg ( FCH_XHCI_IND_REG00, 0xF8FFFFFF, 0x07000000, StdHeader); - // - // xHCI USB 2.0 PHY Settings - // Step 1 is done by hardware default - // Step 2 - RwXhciIndReg ( FCH_XHCI_IND60_REG00, ~ BIT12, BIT12, StdHeader); - // Step 3 - RwXhciIndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8)), StdHeader); - RwXhciIndReg ( FCH_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x0f << 8)), StdHeader); -} - -/** - * XhciA12Fix - Config XHCI A12 Fix - * - * - */ -VOID -XhciA12Fix ( - ) -{ - // - // PLUG/UNPLUG of USB 2.0 devices make the XHCI USB 2.0 ports unfunctional - fix enable - // ACPI_USB3.0_REG 0x20[12:11] = 2'b11 - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x3 << 11)), (UINT32) (0x3 << 11)); - // - // XHC 2 USB2 ports interactional issue - fix enable - // ACPI_USB3.0_REG 0x20[16] = 1'b1 - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 16)), (UINT32) (0x1 << 16)); - // - // XHC USB2.0 Ports suspend Enhancement - // ACPI_USB3.0_REG 0x20[15] = 1'b1 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 15)), (UINT32) (0x1 << 15)); - // - // XHC HS/FS IN Data Buffer Underflow issue - fix enable - // ACPI_USB3.0_REG 0x20[20:18] = 0x7 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x7 << 18)), (UINT32) (0x7 << 18)); - // - // XHC stuck in U3 after system resuming from S3 -fix enable - // ACPI_USB3.0_REG 0x98[19] = 1'b1 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG98, AccessWidth32, ~((UINT32) (0x1 << 19)), (UINT32) (0x1 << 19)); - // - // Change XHC1 ( Dev 16 function 1) Interrupt Pin register to INTB# - Fix enable - // ACPI_PMIO_F0[18] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 18)), (UINT32) (0x1 << 18)); - // - // EHCI3/OHCI3 blocks Blink Global Clock Gating when EHCI/OHCI Dev 22 fn 0/2 are disabled - // ACPI_PMIO_F0[13] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 13)), (UINT32) (0x1 << 13)); - // - // Access register through JTAG fail when switch from XHCI to EHCI/OHCI - Fix enable - // ACPI_PMIO_F0[17] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 17)), (UINT32) (0x1 << 17)); - // - // USB leakage current on differential lines when ports are switched to XHCI - Fix enable - // ACPI_PMIO_F0[14] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 14)), (UINT32) (0x1 << 14)); - // - // Fix for Incorrect Gated Signals in xhc_to_s5 - // ACPI_PMIO_F0[16] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 16)), (UINT32) (0x1 << 16)); -} - -/** - * IsLpcRom - Is LPC Rom? - * - * - * @retval TRUE or FALSE - * - */ -BOOLEAN -IsLpcRom ( - OUT VOID - ) -{ - return ( (BOOLEAN) ((ACPIMMIO32 (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80) & BIT1) == 0) ); -} - -/** - * FchXhciInitBeforePciInit - Config XHCI controller before PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchXhciInitBeforePciInit ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT16 BcdAddress; - UINT16 BcdSize; - UINT16 AcdAddress; - UINT16 AcdSize; - UINT16 FwAddress; - UINT16 FwSize; - UINTN XhciFwStarting; - UINT32 SpiValidBase; - UINT32 RegData; - UINT16 Index; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0x00000000, 0x00400700); - FchStall (20, StdHeader); - - // - // Get ROM SIG starting address for USB firmware starting address (offset 0x0C to SIG address) - // - GetRomSigPtr (&XhciFwStarting, StdHeader); - - if (XhciFwStarting == 0) { - return; - } - XhciFwStarting = ACPIMMIO32 (XhciFwStarting + FW_TO_SIGADDR_OFFSET); - if (IsLpcRom ()) { - // - //XHCI firmware re-load - // - RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, ~BIT2, (BIT2 + BIT1 + BIT0), StdHeader); - RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, 0x00000FFF, (UINT32) (XhciFwStarting), StdHeader); - } - // - // Enable SuperSpeed receive special error case logic. 0x20 bit8 - // Enable USB2.0 RX_Valid Synchronization. 0x20 bit9 - // Enable USB2.0 DIN/SE0 Synchronization. 0x20 bit10 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, 0xFFFFF8FF, 0x00000700); - // - // SuperSpeed PHY Configuration (adaptation timer setting) - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccessWidth32, 0xFFF00000, 0x000AAAAA); - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90 + 0x40, AccessWidth32, 0xFFF00000, 0x000AAAAA); - - // - // Step 1. to enable Xhci IO and Firmware load mode - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xF0FFFFFC, 0x00000003); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xEFFFFFFF, 0x10000000); - - // - // Step 2. to read a portion of the USB3_APPLICATION_CODE from BIOS ROM area and program certain registers. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA0, AccessWidth32, 0x00000000, (SPI_HEAD_LENGTH << 16)); - - BcdAddress = ACPIMMIO16 (XhciFwStarting + BCD_ADDR_OFFSET); - BcdSize = ACPIMMIO16 (XhciFwStarting + BCD_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4, AccessWidth16, 0x0000, BcdAddress); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4 + 2, AccessWidth16, 0x0000, BcdSize); - - AcdAddress = ACPIMMIO16 (XhciFwStarting + ACD_ADDR_OFFSET); - AcdSize = ACPIMMIO16 (XhciFwStarting + ACD_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8, AccessWidth16, 0x0000, AcdAddress); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8 + 2, AccessWidth16, 0x0000, AcdSize); - - SpiValidBase = SPI_BASE2 (XhciFwStarting + 4) | SPI_BAR0_VLD | SPI_BASE0 | SPI_BAR1_VLD | SPI_BASE1 | SPI_BAR2_VLD; - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB0, AccessWidth32, 0x00000000, SpiValidBase); - // - // Copy Type0/1/2 data block from ROM image to MMIO starting from 0xC0 - // - for (Index = 0; Index < SPI_HEAD_LENGTH; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + Index)); - } - - for (Index = 0; Index < BcdSize; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + BcdAddress + Index)); - } - - for (Index = 0; Index < AcdSize; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + BcdSize + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + AcdAddress + Index)); - } - - // - // Step 3. to enable the instruction RAM preload functionality. - // - FwAddress = ACPIMMIO16 (XhciFwStarting + FW_ADDR_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth16, 0x0000, ACPIMMIO16 (XhciFwStarting + FwAddress)); - FwAddress += 2; - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccessWidth16, 0x0000, FwAddress); - - FwSize = ACPIMMIO16 (XhciFwStarting + FW_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccessWidth16, 0x0000, FwSize); - // - // Set the starting address offset for Instruction RAM preload. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccessWidth16, 0x0000, 0); - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~BIT29, BIT29); - - for (;;) { - ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData); - if (RegData & BIT30) break; - } - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~BIT29, 0); - - // - // Step 4. to release resets in XHCI_ACPI_MMIO_AMD_REG00. wait for USPLL to lock by polling USPLL lock. - // - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3PLL_RESET, 0); ///Release U3PLLreset - for (;;) { - ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData); - if (RegData & U3PLL_LOCK) break; - } - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3PHY_RESET, 0); ///Release U3PHY - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3CORE_RESET, 0); ///Release core reset - - // - // SuperSpeed PHY Configuration - // - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccessWidth32, 0xFFF00000, 0x000AAAAA); - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGD0, AccessWidth32, 0xFFF00000, 0x000AAAAA); - - FchXhciInitIndirectReg (StdHeader); - - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, ~(BIT4 + BIT5), 0); /// Disable Device 22 - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, ~(BIT7), BIT7); /// Enable 2.0 devices - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~(BIT21), BIT21); - // - // Step 5. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~(BIT17 + BIT18 + BIT19), BIT17 + BIT18); - - XhciA12Fix (); - - // - // UMI Lane Configuration Information for XHCI Firmware to Calculate the Bandwidth for USB 3.0 ISOC Devices - // - if (!(IsUmiOneLaneGen1Mode (StdHeader))) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~(BIT25 + BIT24), BIT24); - } - // RPR 8.23 FS/LS devices not functional after resume from S4 fix enable (SB02699) - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~(BIT22), BIT22); - // RPR 8.24 XHC USB2.0 Hub disable issue fix enable (SB02702) - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, ~(BIT20), BIT20); -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciLateService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciLateService.c deleted file mode 100644 index 56561e8b6d..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciLateService.c +++ /dev/null @@ -1,129 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCILATESERVICE_FILECODE - -// -// Declaration of local functions -// - -/** - * FchInitLateUsbXhciProgram - Config USB3 controller before OS - * Boot - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitLateUsbXhciProgram ( - IN VOID *FchDataPtr - ) -{ - UINT8 IndexValue; - UINT8 Value; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - if ( LocalCfgPtr->Usb.Xhci1Enable == TRUE ) { - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_BAR00; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x11, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_BAR01; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x12, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_BAR02; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x13, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_BAR03; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_04H; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_0CH; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI_REGISTER_3CH; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_BAR00; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x11, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_BAR01; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x12, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_BAR02; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x13, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_BAR03; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_04H; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_0CH; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &Value, StdHeader); - IndexValue = XHCI1_REGISTER_3CH; - WriteBiosram (IndexValue, AccessWidth8, &Value, StdHeader); - } -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciMidService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciMidService.c deleted file mode 100644 index d601ceecfd..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciMidService.c +++ /dev/null @@ -1,48 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIMIDSERVICE_FILECODE - -// -// Declaration of local functions -// diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciResetService.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciResetService.c deleted file mode 100644 index 6173ffa144..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/Family/Hudson2/Hudson2XhciResetService.c +++ /dev/null @@ -1,118 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config FCH Xhci controller - * - * Init Xhci Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_FAMILY_HUDSON2_HUDSON2XHCIRESETSERVICE_FILECODE - -/** - * FchInitResetXhciProgram - Config Xhci controller during - * Power-On - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitResetXhciProgram ( - IN VOID *FchDataPtr - ) -{ - UINT8 IndexValue; - UINT32 ValueDword; - UINT8 ValueByte; - FCH_RESET_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_RESET_DATA_BLOCK *) FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader); - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader); - if ( ValueDword == (FCH_USB_XHCI_DID << 16) + FCH_USB_XHCI_VID) { - // - // First Xhci controller. - // - ReadPci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader); - ValueDword = 0; - - IndexValue = XHCI_REGISTER_BAR00; - ReadBiosram (IndexValue, AccessWidth32, &ValueDword, StdHeader); - WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x10, AccessWidth32, &ValueDword, StdHeader); - - IndexValue = XHCI_REGISTER_04H; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &ValueByte, StdHeader); - - IndexValue = XHCI_REGISTER_0CH; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &ValueByte, StdHeader); - - IndexValue = XHCI_REGISTER_3CH; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &ValueByte, StdHeader); - // - // Second Xhci controller. - // - ReadPci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x00, AccessWidth32, &ValueDword, StdHeader); - ValueDword = 0; - - IndexValue = XHCI1_REGISTER_BAR00; - ReadBiosram (IndexValue, AccessWidth32, &ValueDword, StdHeader); - WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x10, AccessWidth32, &ValueDword, StdHeader); - - IndexValue = XHCI1_REGISTER_04H; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x04, AccessWidth8, &ValueByte, StdHeader); - - IndexValue = XHCI1_REGISTER_0CH; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x0C, AccessWidth8, &ValueByte, StdHeader); - - IndexValue = XHCI1_REGISTER_3CH; - ReadBiosram (IndexValue, AccessWidth8, &ValueByte, StdHeader); - WritePci ((USB_XHCI1_BUS_DEV_FUN << 16) + 0x3C, AccessWidth8, &ValueByte, StdHeader); - } -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciEnv.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciEnv.c deleted file mode 100644 index 2b9c55bac5..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciEnv.c +++ /dev/null @@ -1,60 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_OHCIENV_FILECODE - -/** - * FchInitEnvUsbOhci - Config USB OHCI controller before PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitEnvUsbOhci ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciLate.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciLate.c deleted file mode 100644 index e40f77c64a..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciLate.c +++ /dev/null @@ -1,60 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_OHCILATE_FILECODE - -/** - * FchInitLateUsbOhci - Config USB OHCI controller before OS - * Boot - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitLateUsbOhci ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciMid.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciMid.c deleted file mode 100644 index e9fc31ca53..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciMid.c +++ /dev/null @@ -1,214 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB OHCI controller - * - * Init USB OHCI features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_OHCIMID_FILECODE -// -// Declaration of local functions -// - -extern VOID FchOhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); -/** - * OhciInitAfterPciInit - Config USB OHCI controller after PCI emulation - * - * @param[in] Value Controller PCI config address (bus# + device# + function#) - * @param[in] FchDataPtr Fch configuration structure pointer. - */ -VOID OhciInitAfterPciInit (IN UINT32 Value, IN FCH_DATA_BLOCK* FchDataPtr); - -/** - * FchInitMidUsbOhci - Config USB OHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbOhci ( - IN VOID *FchDataPtr - ) -{ - FCH_INTERFACE *LocalCfgPtr; - - LocalCfgPtr = (FCH_INTERFACE *)FchDataPtr; - - FchInitMidUsbOhci1 (LocalCfgPtr); - FchInitMidUsbOhci2 (LocalCfgPtr); - FchInitMidUsbOhci3 (LocalCfgPtr); - FchInitMidUsbOhci4 (LocalCfgPtr); -} - -/** - * FchInitMidUsbOhci1 - Config USB1 OHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbOhci1 ( - IN VOID *FchDataPtr - ) -{ - UINT32 DeviceId; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - DeviceId = (USB1_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (DeviceId, LocalCfgPtr); - - if (LocalCfgPtr->Usb.OhciSsid != NULL ) { - RwPci ((USB1_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader); - } -} - -/** - * FchInitMidUsbOhci2 - Config USB2 OHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbOhci2 ( - IN VOID *FchDataPtr - ) -{ - UINT32 DeviceId; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - DeviceId = (USB2_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (DeviceId, LocalCfgPtr); - - if (LocalCfgPtr->Usb.OhciSsid != NULL ) { - RwPci ((USB2_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader); - } -} - -/** - * FchInitMidUsbOhci3 - Config USB3 OHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbOhci3 ( - IN VOID *FchDataPtr - ) -{ - UINT32 DeviceId; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - DeviceId = (USB3_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (DeviceId, LocalCfgPtr); - - if (LocalCfgPtr->Usb.OhciSsid != NULL ) { - RwPci ((USB3_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.OhciSsid, StdHeader); - } -} - -/** - * FchInitMidUsbOhci4 - Config USB4 OHCI controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbOhci4 ( - IN VOID *FchDataPtr - ) -{ - UINT32 DeviceId; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - DeviceId = (USB4_OHCI_BUS_DEV_FUN << 16); - OhciInitAfterPciInit (DeviceId, LocalCfgPtr); - - if (LocalCfgPtr->Usb.Ohci4Ssid != NULL ) { - RwPci ((USB4_OHCI_BUS_DEV_FUN << 16) + FCH_OHCI_REG2C, AccessWidth32, 0x00, LocalCfgPtr->Usb.Ohci4Ssid, StdHeader); - } -} - -/** - * OhciInitAfterPciInit - Config OHCI controller after PCI - * emulation - * - * - * @param[in] Value OHCI Controler info. - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -OhciInitAfterPciInit ( - IN UINT32 Value, - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - FchOhciInitAfterPciInit ( Value, FchDataPtr); -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciReset.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciReset.c deleted file mode 100644 index 7d4ec9f24d..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/OhciReset.c +++ /dev/null @@ -1,78 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch Ohci controller - * - * Init Ohci Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_OHCIRESET_FILECODE - -/** - * FchInitResetOhci - Config Ohci controller during Power-On - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitResetOhci ( - IN VOID *FchDataPtr - ) -{ -} - -/** - * FchInitRecoveryLpc - Config Ohci controller during Crisis - * Recovery - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitRecoveryOhci ( - IN VOID *FchDataPtr - ) -{ -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbEnv.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbEnv.c deleted file mode 100644 index 60f50a5e8c..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbEnv.c +++ /dev/null @@ -1,107 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB controller - * - * Init USB features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_USBENV_FILECODE -/** - * FchInitEnvUsb - Config USB controller before PCI emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitEnvUsb ( - IN VOID *FchDataPtr - ) -{ - // - // Disabled All USB controller *** Move to each controller *** - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, BIT7, 0); - // - // Clear PM_IO 0x65[4] UsbResetByPciRstEnable, Set this bit so that usb gets reset whenever there is PCIRST. - // Enable UsbResumeEnable (USB PME) * Default value - // USB SleepCtrl set as BIT9+BIT8 (6 uframes) - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth16, ~BIT2, BIT2 + BIT7 + BIT8 + BIT9); - - SetUsbEnableReg (FchDataPtr); - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEE, AccessWidth8, ~(BIT2), 0 ); -} - - -/** - * SetUsbEnableReg - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -SetUsbEnableReg ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - UINT8 UsbModeReg; - - UsbModeReg = 0; - - // Overwrite EHCI3/OHCI3 by Xhci1Enable - if (FchDataPtr->Usb.Xhci1Enable) { - FchDataPtr->Usb.Ohci3Enable = FALSE; - FchDataPtr->Usb.Ehci3Enable = FALSE; - } - - if ( FchDataPtr->Usb.Ohci1Enable ) UsbModeReg |= 0x01; - if ( FchDataPtr->Usb.Ehci1Enable ) UsbModeReg |= 0x02; - if ( FchDataPtr->Usb.Ohci2Enable ) UsbModeReg |= 0x04; - if ( FchDataPtr->Usb.Ehci2Enable ) UsbModeReg |= 0x08; - if ( FchDataPtr->Usb.Ohci3Enable ) UsbModeReg |= 0x10; - if ( FchDataPtr->Usb.Ehci3Enable ) UsbModeReg |= 0x20; - if ( FchDataPtr->Usb.Ohci4Enable ) UsbModeReg |= 0x40; - - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, BIT7, UsbModeReg); -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbLate.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbLate.c deleted file mode 100644 index 038ed24451..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbLate.c +++ /dev/null @@ -1,61 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB controller - * - * Init USB features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_USBLATE_FILECODE - -/** - * FchInitLateUsb - Config USB controller before OS Boot - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitLateUsb ( - IN VOID *FchDataPtr - ) -{ -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbMid.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbMid.c deleted file mode 100644 index f6ab38d54a..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbMid.c +++ /dev/null @@ -1,68 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB controller - * - * Init USB features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_USBMID_FILECODE - -/** - * FchInitMidUsb - Config USB controller after PCI emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsb ( - IN VOID *FchDataPtr - ) -{ - FCH_DATA_BLOCK *LocalCfgPtr; - - LocalCfgPtr = (FCH_DATA_BLOCK *) FchDataPtr; - if ( LocalCfgPtr->Usb.UsbPhyPowerDown ) { - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth8, ~BIT0, BIT0); - } else { - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth8, ~BIT0, 0); - } -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbReset.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbReset.c deleted file mode 100644 index e51332e845..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/UsbReset.c +++ /dev/null @@ -1,77 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch Usb controller - * - * Init Usb Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_USBRESET_FILECODE - -/** - * FchInitResetUsb - Config Usb controller during Power-On - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitResetUsb ( - IN VOID *FchDataPtr - ) -{ -} - -/** - * FchInitRecoveryLpc - Config Usb controller during Crisis - * Recovery - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitRecoveryUsb ( - IN VOID *FchDataPtr - ) -{ -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciEnv.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciEnv.c deleted file mode 100644 index a3d82b954d..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciEnv.c +++ /dev/null @@ -1,126 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 47163 $ @e \$Date: 2011-02-16 07:23:13 +0800 (Wed, 16 Feb 2011) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_XHCIENV_FILECODE - -extern VOID FchXhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr); -extern VOID FchXhciInitIndirectReg (IN AMD_CONFIG_PARAMS *StdHeader); - -// -// Declaration of local functions -// -VOID XhciInitBeforePciInit (IN FCH_DATA_BLOCK* FchDataPtr); -VOID XhciInitIndirectReg (IN AMD_CONFIG_PARAMS *StdHeader); - -/** - * FchInitEnvUsbXhci - Config XHCI controller before PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitEnvUsbXhci ( - IN VOID *FchDataPtr - ) -{ - UINT8 XhciEfuse; - FCH_DATA_BLOCK *LocalCfgPtr; - AMD_CONFIG_PARAMS *StdHeader; - - LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr; - StdHeader = LocalCfgPtr->StdHeader; - - if ( LocalCfgPtr->Usb.Xhci1Enable == TRUE ) { - if ( LocalCfgPtr->Misc.S3Resume == 0 ) { - XhciInitBeforePciInit (LocalCfgPtr); - } else { - XhciInitIndirectReg (StdHeader); - } - } else { - // - // for power saving. - // - // add Efuse checking for Xhci enable/disable - XhciEfuse = XHCI_EFUSE_LOCATION; - GetEfuseStatus (&XhciEfuse, StdHeader); - if ((XhciEfuse & (BIT0 + BIT1)) != (BIT0 + BIT1)) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xF0FFFBFF, 0x0); - } - } -} - -/** - * XhciInitIndirectReg - Config XHCI Indirect Registers - * - * - * - * @param[in] StdHeader AMD Standard Header - * - */ -VOID -XhciInitIndirectReg ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - FchXhciInitIndirectReg (StdHeader); -} - -/** - * XhciInitBeforePciInit - Config XHCI controller before PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -XhciInitBeforePciInit ( - IN FCH_DATA_BLOCK *FchDataPtr - ) -{ - FchXhciInitBeforePciInit ( FchDataPtr ); -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciLate.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciLate.c deleted file mode 100644 index 4c35ff3a2e..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciLate.c +++ /dev/null @@ -1,63 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_XHCILATE_FILECODE - -extern VOID FchInitLateUsbXhciProgram (IN VOID *FchDataPtr); - -/** - * FchInitLateUsbXhci - Config USB3 controller before OS Boot - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitLateUsbXhci ( - IN VOID *FchDataPtr - ) -{ - FchInitLateUsbXhciProgram ( FchDataPtr ); -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciMid.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciMid.c deleted file mode 100644 index 3f61626a58..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciMid.c +++ /dev/null @@ -1,70 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch USB3 controller - * - * Init USB3 features. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/*;******************************************************************************** -; -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -;*********************************************************************************/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_XHCIMID_FILECODE - -/** - * FchInitMidUsbXhci - Config USB3 controller after PCI - * emulation - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitMidUsbXhci ( - IN VOID *FchDataPtr - ) -{ - FCH_DATA_BLOCK *LocalCfgPtr; - - LocalCfgPtr = (FCH_DATA_BLOCK *)FchDataPtr; - - if ( LocalCfgPtr->Usb.Xhci1Enable == TRUE ) { - // - // Block Write to DID & SID to pass DTM - // - RwXhciIndReg (FCH_XHCI_IND_REG04, ~BIT8, BIT8, ((FCH_DATA_BLOCK *)FchDataPtr)->StdHeader); - } -} diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciRecovery.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciRecovery.c deleted file mode 100644 index 6bb82ccc94..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciRecovery.c +++ /dev/null @@ -1,332 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch Xhci controller - * - * Init Xhci Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 01:16:51 -0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_XHCIRECOVERY_FILECODE - -/** - * XhciIndirectRegInit - Config XHCI Indirect Registers - * - * - * - * @param[in] StdHeader AMD Standard Header - * - */ -VOID -XhciIndirectRegInit ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - // - // SuperSpeed PHY Configuration (adaptation mode setting) - // - RwXhciIndReg ( FCH_XHCI_IND_REG94, 0xFFFFFC00, 0x00000021, StdHeader); - RwXhciIndReg ( FCH_XHCI_IND_REGD4, 0xFFFFFC00, 0x00000021, StdHeader); - // - // SuperSpeed PHY Configuration (CR phase and frequency filter settings) - // - RwXhciIndReg ( FCH_XHCI_IND_REG98, 0xFFFFFFC0, 0x0000000A, StdHeader); - RwXhciIndReg ( FCH_XHCI_IND_REGD8, 0xFFFFFFC0, 0x0000000A, StdHeader); - // - // BLM Meaasge - // - RwXhciIndReg ( FCH_XHCI_IND_REG00, 0xF8FFFFFF, 0x07000000, StdHeader); - // - // xHCI USB 2.0 PHY Settings - // Step 1 is done by hardware default - // Step 2 - RwXhciIndReg ( FCH_XHCI_IND60_REG00, ~ BIT12, BIT12, StdHeader); - // Step 3 - RwXhciIndReg ( FCH_XHCI_IND60_REG0C, ~ ((UINT32) (0x0f << 8)), ((UINT32) (0x02 << 8)), StdHeader); - RwXhciIndReg ( FCH_XHCI_IND60_REG08, ~ ((UINT32) (0xff << 8)), ((UINT32) (0x0f << 8)), StdHeader); -} - -/** - * XhciA12Patch - Config XHCI A12 Fix - * - * - */ -VOID -XhciA12Patch ( - ) -{ - // - // PLUG/UNPLUG of USB 2.0 devices make the XHCI USB 2.0 ports unfunctional - fix enable - // ACPI_USB3.0_REG 0x20[12:11] = 2'b11 - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x3 << 11)), (UINT32) (0x3 << 11)); - // - // XHC 2 USB2 ports interactional issue - fix enable - // ACPI_USB3.0_REG 0x20[16] = 1'b1 - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 16)), (UINT32) (0x1 << 16)); - // - // XHC USB2.0 Ports suspend Enhancement - // ACPI_USB3.0_REG 0x20[15] = 1'b1 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x1 << 15)), (UINT32) (0x1 << 15)); - // - // XHC HS/FS IN Data Buffer Underflow issue - fix enable - // ACPI_USB3.0_REG 0x20[19:18] = 2'b11 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~((UINT32) (0x3 << 18)), (UINT32) (0x3 << 18)); - // - // XHC stuck in U3 after system resuming from S3 -fix enable - // ACPI_USB3.0_REG 0x98[19] = 1'b1 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG98, AccessWidth32, ~((UINT32) (0x1 << 19)), (UINT32) (0x1 << 19)); - // - // Change XHC1 ( Dev 16 function 1) Interrupt Pin register to INTB# - Fix enable - // ACPI_PMIO_F0[18] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 18)), (UINT32) (0x1 << 18)); - // - // EHCI3/OHCI3 blocks Blink Global Clock Gating when EHCI/OHCI Dev 22 fn 0/2 are disabled - // ACPI_PMIO_F0[13] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 13)), (UINT32) (0x1 << 13)); - // - // Access register through JTAG fail when switch from XHCI to EHCI/OHCI - Fix enable - // ACPI_PMIO_F0[17] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 17)), (UINT32) (0x1 << 17)); - // - // USB leakage current on differential lines when ports are switched to XHCI - Fix enable - // ACPI_PMIO_F0[14] =1 - // - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGF0, AccessWidth32, ~((UINT32) (0x1 << 14)), (UINT32) (0x1 << 14)); -} - -/** - * IsItLpcRom - Is LPC Rom? - * - * - * @retval TRUE or FALSE - * - */ -BOOLEAN -IsItLpcRom ( - OUT VOID - ) -{ - return ( (BOOLEAN) ((ACPIMMIO32 (ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG80) & BIT1) == 0) ); -} - -/** - * Is UMI in x1-Lane and GEN1 Mode? - * - * - * @retval TRUE or FALSE - * - */ -BOOLEAN -IsUmiX1LaneGen1Mode ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT32 AbValue; - - AbValue = ReadAlink ((UINT32) (FCH_AX_CFG_REG68), StdHeader); - AbValue >>= 16; - if (((AbValue & 0x0f) == 1) && ((AbValue & 0x03f0) == 0x0010)) { - return (TRUE); - } else { - return (FALSE); - } -} - -/** - * FchXhciEarlyInit - Config XHCI controller in recovery mode - * - * - */ -VOID -FchXhciEarlyInit ( - IN AMD_CONFIG_PARAMS *StdHeader - ) -{ - UINT16 BcdAddress; - UINT16 BcdSize; - UINT16 AcdAddress; - UINT16 AcdSize; - UINT16 FwAddress; - UINT16 FwSize; - UINTN XhciFwStarting; - UINT32 SpiValidBase; - UINT32 RegData; - UINT16 Index; - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0x00000000, 0x00400700); - FchStall (20, StdHeader); - - // - // Get ROM SIG starting address for USB firmware starting address (offset 0x0C to SIG address) - // - GetRomSigPtr (&XhciFwStarting, StdHeader); - - if (XhciFwStarting == 0) { - return; - } - XhciFwStarting = ACPIMMIO32 (XhciFwStarting + FW_TO_SIGADDR_OFFSET); - if (IsItLpcRom ()) { - // - //XHCI firmware re-load - // - RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, ~BIT2, (BIT2 + BIT1 + BIT0), StdHeader); - RwPci ((LPC_BUS_DEV_FUN << 16) + FCH_LPC_REGCC, AccessWidth32, 0x00000FFF, (UINT32) (XhciFwStarting), StdHeader); - } - // - // Enable SuperSpeed receive special error case logic. 0x20 bit8 - // Enable USB2.0 RX_Valid Synchronization. 0x20 bit9 - // Enable USB2.0 DIN/SE0 Synchronization. 0x20 bit10 - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, 0xFFFFF8FF, 0x00000700); - // - // SuperSpeed PHY Configuration (adaptation timer setting) - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccessWidth32, 0xFFF00000, 0x000AAAAA); - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90 + 0x40, AccessWidth32, 0xFFF00000, 0x000AAAAA); - - // - // Step 1. to enable Xhci IO and Firmware load mode - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xF0FFFFFC, 0x00000003); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, 0xEFFFFFFF, 0x10000000); - - // - // Step 2. to read a portion of the USB3_APPLICATION_CODE from BIOS ROM area and program certain registers. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA0, AccessWidth32, 0x00000000, (SPI_HEAD_LENGTH << 16)); - - BcdAddress = ACPIMMIO16 (XhciFwStarting + BCD_ADDR_OFFSET); - BcdSize = ACPIMMIO16 (XhciFwStarting + BCD_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4, AccessWidth16, 0x0000, BcdAddress); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA4 + 2, AccessWidth16, 0x0000, BcdSize); - - AcdAddress = ACPIMMIO16 (XhciFwStarting + ACD_ADDR_OFFSET); - AcdSize = ACPIMMIO16 (XhciFwStarting + ACD_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8, AccessWidth16, 0x0000, AcdAddress); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGA8 + 2, AccessWidth16, 0x0000, AcdSize); - - SpiValidBase = SPI_BASE2 (XhciFwStarting + 4) | SPI_BAR0_VLD | SPI_BASE0 | SPI_BAR1_VLD | SPI_BASE1 | SPI_BAR2_VLD; - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB0, AccessWidth32, 0x00000000, SpiValidBase); - // - // Copy Type0/1/2 data block from ROM image to MMIO starting from 0xC0 - // - for (Index = 0; Index < SPI_HEAD_LENGTH; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + Index)); - } - - for (Index = 0; Index < BcdSize; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + BcdAddress + Index)); - } - - for (Index = 0; Index < AcdSize; Index++) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGC0 + SPI_HEAD_LENGTH + BcdSize + Index, AccessWidth8, 0, ACPIMMIO8 (XhciFwStarting + AcdAddress + Index)); - } - - // - // Step 3. to enable the instruction RAM preload functionality. - // - FwAddress = ACPIMMIO16 (XhciFwStarting + FW_ADDR_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth16, 0x0000, ACPIMMIO16 (XhciFwStarting + FwAddress)); - FwAddress += 2; - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04, AccessWidth16, 0x0000, FwAddress); - - FwSize = ACPIMMIO16 (XhciFwStarting + FW_SIZE_OFFSET); - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG04 + 2, AccessWidth16, 0x0000, FwSize); - // - // Set the starting address offset for Instruction RAM preload. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG08, AccessWidth16, 0x0000, 0); - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~BIT29, BIT29); - - for (;;) { - ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData); - if (RegData & BIT30) break; - } - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~BIT29, 0); - - // - // Step 4. to release resets in XHCI_ACPI_MMIO_AMD_REG00. wait for USPLL to lock by polling USPLL lock. - // - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3PLL_RESET, 0); ///Release U3PLLreset - for (;;) { - ReadMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00 , AccessWidth32, &RegData); - if (RegData & U3PLL_LOCK) break; - } - - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3PHY_RESET, 0); ///Release U3PHY - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~U3CORE_RESET, 0); ///Release core reset - - // - // SuperSpeed PHY Configuration - // - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG90, AccessWidth32, 0xFFF00000, 0x000AAAAA); - //RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGD0, AccessWidth32, 0xFFF00000, 0x000AAAAA); - - XhciIndirectRegInit (StdHeader); - - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, ~(BIT4 + BIT5), 0); /// Disable Device 22 - RwMem (ACPI_MMIO_BASE + PMIO_BASE + FCH_PMIOA_REGEF, AccessWidth8, ~(BIT7), BIT7); /// Enable 2.0 devices - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~(BIT21), BIT21); - // - // Step 5. - // - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG00, AccessWidth32, ~(BIT17 + BIT18 + BIT19), BIT17 + BIT18); - - XhciA12Patch (); - - // - // UMI Lane Configuration Information for XHCI Firmware to Calculate the Bandwidth for USB 3.0 ISOC Devices - // - if (!(IsUmiX1LaneGen1Mode (StdHeader))) { - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~(BIT25 + BIT24), BIT24); - } - // RPR 8.23 FS/LS devices not functional after resume from S4 fix enable (SB02699) - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REG20, AccessWidth32, ~(BIT22), BIT22); - // RPR 8.24 XHC USB2.0 Hub disable issue fix enable (SB02702) - RwMem (ACPI_MMIO_BASE + XHCI_BASE + XHCI_ACPI_MMIO_AMD_REGB4, AccessWidth32, ~(BIT20), BIT20); -} - diff --git a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciReset.c b/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciReset.c deleted file mode 100644 index d1606afa55..0000000000 --- a/src/vendorcode/amd/agesa/f12/Proc/Fch/Usb/XhciReset.c +++ /dev/null @@ -1,81 +0,0 @@ -/* $NoKeywords:$ */ -/** - * @file - * - * Config Fch Xhci controller - * - * Init Xhci Controller features (PEI phase). - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: FCH - * @e \$Revision: 44324 $ @e \$Date: 2010-12-22 17:16:51 +0800 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -**************************************************************************** -*/ -#include "FchPlatform.h" -#include "Filecode.h" -#define FILECODE PROC_FCH_USB_XHCIRESET_FILECODE - -extern VOID FchInitResetXhciProgram (IN VOID *FchDataPtr); - -/** - * FchInitResetXhci - Config Xhci controller during Power-On - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitResetXhci ( - IN VOID *FchDataPtr - ) -{ - FchInitResetXhciProgram ( FchDataPtr ); -} - -/** - * FchInitRecoveryLpc - Config Xhci controller during Crisis - * Recovery - * - * - * - * @param[in] FchDataPtr Fch configuration structure pointer. - * - */ -VOID -FchInitRecoveryXhci ( - IN VOID *FchDataPtr - ) -{ -} - |