diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtrci3.c')
-rw-r--r-- | src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtrci3.c | 307 |
1 files changed, 0 insertions, 307 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtrci3.c b/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtrci3.c deleted file mode 100644 index 77ddfb4f43..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/Mem/Tech/DDR3/mtrci3.c +++ /dev/null @@ -1,307 +0,0 @@ -/** - * @file - * - * mtrci3.c - * - * Technology Control word initialization for DDR3 - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: (Mem/Tech/DDR3) - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - **/ -/***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "Ids.h" -#include "mm.h" -#include "mn.h" -#include "mu.h" -#include "mt.h" -#include "mt3.h" -#include "mtrci3.h" -#include "merrhdl.h" -#include "Filecode.h" -#define FILECODE PROC_MEM_TECH_DDR3_MTRCI3_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -VOID -STATIC -MemTSendCtlWord3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN UINT8 CmdNum, - IN UINT8 Value - ); - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sends control words - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -VOID -MemTDramControlRegInit3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 ChipSel; - UINT8 i; - UINT8 RawCard; - UINT8 Data; - UINT16 CsPresent; - - MEM_DATA_STRUCT *MemPtr; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - CsPresent = NBPtr->DCTPtr->Timings.CsPresent; - - MemUWait10ns (800, MemPtr); // wait 8us TACT must be changed to optimize to 8 MEM CLKs - - // Set EnDramInit to start DRAM initialization - - MemUWait10ns (600, MemPtr); // wait 6us for PLL LOCK - - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) { - // - // If chip select present - // - if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) { - NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel); - - // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects. - NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE)); - - RawCard = NBPtr->ChannelPtr->RefRawCard[ChipSel >> 1]; - - for (i = 0; i <= 15; i++) { - // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs - MemUWait10ns (800, MemPtr); - if ((i != 6) && (i != 7)) { - Data = MemTGetCtlWord3 (TechPtr, i, RawCard, ChipSel); - MemTSendCtlWord3 (TechPtr, i, Data); - } - } - } - } - MemUWait10ns (600, MemPtr); // wait 6us for TSTAB -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function calculates the ControlRC value - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in] CtrlWordNum - control Word number. - * @param[in] RawCard - Raw Card - * @param[in] ChipSel - Target Chip Select - * @return Control Word value - */ - -UINT8 -MemTGetCtlWord3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN UINT8 CtrlWordNum, - IN UINT8 RawCard, - IN UINT8 ChipSel - ) -{ - UINT8 Data; - DCT_STRUCT *DCTPtr; - CH_DEF_STRUCT *ChannelPtr; - - DCTPtr = TechPtr->NBPtr->DCTPtr; - ChannelPtr = TechPtr->NBPtr->ChannelPtr; - - Data = 0; //Default value for all control words is 0 - switch (CtrlWordNum) { - case 0: - Data = 0x02; // DA4=1 - break; - case 1: - if (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) { - Data = 0x0C; // if single rank, set DBA1 and DBA0 - } - break; - case 2: - Data = ChannelPtr->CtrlWrd02[ChipSel >> 1]; - break; - case 3: - Data = ChannelPtr->CtrlWrd03[ChipSel >> 1]; - break; - case 4: - Data = ChannelPtr->CtrlWrd04[ChipSel >> 1]; - break; - case 5: - Data = ChannelPtr->CtrlWrd05[ChipSel >> 1]; - break; - case 8: - Data = ChannelPtr->CtrlWrd08[ChipSel >> 1]; - break; - case 9: - Data = 0x0D; - break; - default:; - } - - return (Data & 0x0F); -} -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sends control word command - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * @param[in] CmdNum - control number. - * @param[in] Value - value to send - * - */ - -VOID -STATIC -MemTSendCtlWord3 ( - IN OUT MEM_TECH_BLOCK *TechPtr, - IN UINT8 CmdNum, - IN UINT8 Value - ) -{ - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - - // 1. Program MrsBank and MrsAddress. - // n = [BA2, A2, A1, A0]. - // data = [BA1, BA0, A4, A3]. - // Set all other bits in MrsAddress to zero. - // - NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum & 8) >> 1) | (Value >> 2)); - NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value & 3) << 3) | (CmdNum & 7)); - IDS_HDT_CONSOLE ("\t\tCS%lx RC%02lx %04lx\n", - (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 20) & 0xF, - ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 15) & 8) | - (NBPtr->GetBitField (NBPtr, BFDramInitRegReg) & 7), - ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 14) & 0xC) | - ((NBPtr->GetBitField (NBPtr, BFDramInitRegReg) >> 3) & 3)); - - // 2.Set SendCtrlWord=1 - NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1); - // 3.Wait for BFSendCtrlWord=0 - NBPtr->PollBitField (NBPtr, BFSendCtrlWord, 0, PCI_ACCESS_TIMEOUT, FALSE); -} - -/* -----------------------------------------------------------------------------*/ -/** - * - * This function sends specific control words commands before frequency change for certain DRAM buffers. - * - * @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK - * - */ - -VOID -FreqChgCtrlWrd3 ( - IN OUT MEM_TECH_BLOCK *TechPtr - ) -{ - UINT8 ChipSel; - UINT16 Speed; - UINT16 CsPresent; - - MEM_DATA_STRUCT *MemPtr; - MEM_NB_BLOCK *NBPtr; - - NBPtr = TechPtr->NBPtr; - MemPtr = NBPtr->MemPtr; - Speed = NBPtr->DCTPtr->Timings.Speed; - CsPresent = NBPtr->DCTPtr->Timings.CsPresent; - - - for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) { - // - // If chip select present. - // - if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) { - - NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel); - // program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects. - NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE)); - - //wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs - MemUWait10ns (800, MemPtr); - if (Speed == DDR1066_FREQUENCY) { - MemTSendCtlWord3 (TechPtr, 0x0A, 1); - } else if (Speed == DDR1333_FREQUENCY) { - MemTSendCtlWord3 (TechPtr, 0x0A, 2); - } else if (Speed == DDR1600_FREQUENCY) { - MemTSendCtlWord3 (TechPtr, 0x0A, 3); - } - } - } -} - |