diff options
Diffstat (limited to 'src/vendorcode/amd/agesa/Legacy')
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/PlatformMemoryConfiguration.inc | 402 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/Proc/Dispatcher.c | 161 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/Proc/Legacy.bat | 286 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/Proc/agesaCallouts.c | 397 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/Proc/arch2008.asm | 2674 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/Proc/hobTransfer.c | 394 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/agesa.inc | 2547 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/amd.inc | 461 | ||||
| -rw-r--r-- | src/vendorcode/amd/agesa/Legacy/bridge32.inc | 577 |
9 files changed, 7899 insertions, 0 deletions
diff --git a/src/vendorcode/amd/agesa/Legacy/PlatformMemoryConfiguration.inc b/src/vendorcode/amd/agesa/Legacy/PlatformMemoryConfiguration.inc new file mode 100644 index 0000000000..86643230ea --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/PlatformMemoryConfiguration.inc @@ -0,0 +1,402 @@ +; **************************************************************************** +; * +; * @file +; * +; * AMD Platform Specific Memory Configuration +; * +; * Contains AMD AGESA Memory Configuration Override Interface +; * +; * @xrefitem bom "File Content Label" "Release Content" +; * @e project: AGESA +; * @e sub-project: Include +; * @e \$Revision: 22910 $ @e \$Date: 2009-11-27 04:50:20 -0600 (Fri, 27 Nov 2009) $ +; +;***************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;***************************************************************************** + +IFNDEF PSO_ENTRY + PSO_ENTRY TEXTEQU <UINT8>; < Platform Configuration Table Entry +ENDIF +; ***************************************************************************************** +; * +; * PLATFORM SPECIFIC MEMORY DEFINITIONS +; * +; ***************************************************************************************** +; */ +; +; < Memory Speed and DIMM Population Masks +; +; < DDR Speed Masks +; +ANY_SPEED EQU 0FFFFFFFFh +DDR400 EQU ( 1 SHL (DDR400_FREQUENCY / 66)) +DDR533 EQU ( 1 SHL (DDR533_FREQUENCY / 66)) +DDR667 EQU ( 1 SHL (DDR667_FREQUENCY / 66)) +DDR800 EQU ( 1 SHL (DDR800_FREQUENCY / 66)) +DDR1066 EQU ( 1 SHL (DDR1066_FREQUENCY / 66)) +DDR1333 EQU ( 1 SHL (DDR1333_FREQUENCY / 66)) +DDR1600 EQU ( 1 SHL (DDR1600_FREQUENCY / 66)) +DDR1866 EQU ( 1 SHL (DDR1866_FREQUENCY / 66)) +; < +; < DIMM POPULATION MASKS +; +ANY_ EQU 0FFh +SR_DIMM0 EQU 0001h +SR_DIMM1 EQU 0010h +SR_DIMM2 EQU 0100h +SR_DIMM3 EQU 1000h +DR_DIMM0 EQU 0002h +DR_DIMM1 EQU 0020h +DR_DIMM2 EQU 0200h +DR_DIMM3 EQU 2000h +QR_DIMM0 EQU 0004h +QR_DIMM1 EQU 0040h +QR_DIMM2 EQU 0400h +QR_DIMM3 EQU 4000h +ANY_DIMM0 EQU 000Fh +ANY_DIMM1 EQU 00F0h +ANY_DIMM2 EQU 0F00h +ANY_DIMM3 EQU 0F000h +; +; Number of Dimms +; +ANY_NUM EQU 0FFh +NO_DIMM EQU 00h +ONE_DIMM EQU 01h +TWO_DIMM EQU 02h +THREE_DIMM EQU 04h +FOUR_DIMM EQU 08h +; ***************************************************************************************** +; * +; * Platform Specific Override Definitions for Socket, Channel and Dimm +; * This indicates where a platform override will be applied. +; * +; ***************************************************************************************** +; +; SOCKET MASKS +; +ANY_SOCKET EQU 0FFh +SOCKET0 EQU 01h +SOCKET1 EQU 02h +SOCKET2 EQU 04h +SOCKET3 EQU 08h +SOCKET4 EQU 10h +SOCKET5 EQU 20h +SOCKET6 EQU 40h +SOCKET7 EQU 80h +; +; CHANNEL MASKS +; +ANY_CHANNEL EQU 0FFh +CHANNEL_A EQU 01h +CHANNEL_B EQU 02h +CHANNEL_C EQU 04h +CHANNEL_D EQU 08h +; +; DIMM MASKS +; +ALL_DIMMS EQU 0FFh +DIMM0 EQU 01h +DIMM1 EQU 02h +DIMM2 EQU 04h +DIMM3 EQU 08h +; +; REGISTER ACCESS MASKS +; +ACCESS_NB0 EQU 0h +ACCESS_NB1 EQU 01h +ACCESS_NB2 EQU 02h +ACCESS_NB3 EQU 03h +ACCESS_NB4 EQU 04h +ACCESS_PHY EQU 05h +ACCESS_DCT_XT EQU 06h +; ***************************************************************************************** +; * +; * Platform Specific Overriding Table Definitions +; * +; ***************************************************************************************** +PSO_END EQU 0 ; < Table End +PSO_CKE_TRI EQU 1 ; < CKE Tristate Map +PSO_ODT_TRI EQU 2 ; < ODT Tristate Map +PSO_CS_TRI EQU 3 ; < CS Tristate Map +PSO_MAX_DIMMS EQU 4 ; < Max Dimms per channel +PSO_CLK_SPEED EQU 5 ; < Clock Speed +PSO_DIMM_TYPE EQU 6 ; < Dimm Type +PSO_MEMCLK_DIS EQU 7 ; < MEMCLK Disable Map +PSO_MAX_CHNLS EQU 8 ; < Max Channels per Socket +PSO_BUS_SPEED EQU 9 ; < Max Memory Bus Speed +PSO_MAX_CHIPSELS EQU 10 ; < Max Chipsel per Channel +PSO_MEM_TECH EQU 11 ; < Channel Memory Type +PSO_WL_SEED EQU 12 ; < DDR3 Write Levelization Seed delay +PSO_RXEN_SEED EQU 13 ; < Hardwared based RxEn seed +PSO_NO_LRDIMM_CS67_ROUTING EQU 14 ; < CS6 and CS7 are not Routed to all Memoy slots on a channel for LRDIMMs +; ********************************** +; * CONDITIONAL PSO SPECIFIC ENTRIES +; ********************************** +; Condition Types +CONDITIONAL_PSO_MIN EQU 100 ; < Start of Conditional Entry Types +PSO_CONDITION_AND EQU 100 ; < And Block - Start of Conditional block +PSO_CONDITION_LOC EQU 101 ; < Location - Specify Socket, Channel, Dimms to be affected +PSO_CONDITION_SPD EQU 102 ; < SPD - Specify a specific SPD value on a Dimm on the channel +PSO_CONDITION_REG EQU 103 ; Reserved +PSO_CONDITION_MAX EQU 103 ; < End Of Condition Entry Types +; Action Types +PSO_ACTION_MIN EQU 120 ; < Start of Action Entry Types +PSO_ACTION_ODT EQU 120 ; < ODT values to override +PSO_ACTION_ADDRTMG EQU 121 ; < Address/Timing values to override +PSO_ACTION_ODCCONTROL EQU 122 ; < ODC Control values to override +PSO_ACTION_SLEWRATE EQU 123 ; < Slew Rate value to override +PSO_ACTION_REG EQU 124 ; Reserved +PSO_ACTION_SPEEDLIMIT EQU 125 ; < Memory Bus speed Limit based on configuration +PSO_ACTION_MAX EQU 125 ; < End of Action Entry Types +CONDITIONAL_PSO_MAX EQU 139 ; < End of Conditional Entry Types +; ***************************************************************************************** +; * +; * CONDITIONAL OVERRIDE TABLE MACROS +; * +; ***************************************************************************************** +MEMCLK_DIS_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ + DB PSO_MEMCLK_DIS + DB 10 + DB SocketID + DB ChannelID + DB Bit0Map + DB Bit1Map + DB Bit2Map + DB Bit3Map + DB Bit4Map + DB Bit5Map + DB Bit6Map + DB Bit7Map +ENDM + +CKE_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ + DB PSO_CKE_TRI + DB 4 + DB SocketID + DB ChannelID + DB Bit0Map + DB Bit1Map +ENDM + +ODT_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ + DB PSO_ODT_TRI + DB 6 + DB SocketID + DB ChannelID + DB Bit0Map + DB Bit1Map + DB Bit2Map + DB Bit3Map +ENDM + +CS_TRI_MAP MACRO SocketID:REQ, ChannelID:REQ, Bit0Map:REQ, Bit1Map:REQ, Bit2Map:REQ, Bit3Map:REQ, Bit4Map:REQ, Bit5Map:REQ, Bit6Map:REQ, Bit7Map:REQ + DB PSO_CS_TRI + DB 10 + DB SocketID + DB ChannelID + DB Bit0Map + DB Bit1Map + DB Bit2Map + DB Bit3Map + DB Bit4Map + DB Bit5Map + DB Bit6Map + DB Bit7Map +ENDM + +NUMBER_OF_DIMMS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfDimmSlotsPerChannel:REQ + DB PSO_MAX_DIMMS + DB 3 + DB SocketID + DB ChannelID + DB NumberOfDimmSlotsPerChannel +ENDM + +NUMBER_OF_CHIP_SELECTS_SUPPORTED MACRO SocketID:REQ, ChannelID:REQ, NumberOfChipSelectsPerChannel:REQ + DB PSO_MAX_CHIPSELS + DB 3 + DB SocketID + DB ChannelID + DB NumberOfChipSelectsPerChannel +ENDM + +NUMBER_OF_CHANNELS_SUPPORTED MACRO SocketID:REQ, NumberOfChannelsPerSocket:REQ + DB PSO_MAX_CHNLS + DB 3 + DB SocketID + DB ANY_CHANNEL + DB NumberOfChannelsPerSocket +ENDM + +OVERRIDE_DDR_BUS_SPEED MACRO SocketID:REQ, ChannelID:REQ, TimingMode:REQ, BusSpeed:REQ + PSO_BUS_SPEED + DB 10 + DB SocketID + DB ChannelID + DD TimingMode + DD BusSpeed +ENDM + +DRAM_TECHNOLOGY MACRO SocketID:REQ, MemTechType:REQ + DB PSO_MEM_TECH + DB 6 + DB SocketID + DB ANY_CHANNEL + DD MemTechType +ENDM + +WRITE_LEVELING_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ +Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ + DB PSO_WL_SEED + DB 11 + DB SocketID + DB ChannelID + DB Byte0Seed + DB Byte1Seed + DB Byte2Seed + DB Byte3Seed + DB Byte4Seed + DB Byte5Seed + DB Byte6Seed + DB Byte7Seed + DB ByteEccSeed +ENDM + +HW_RXEN_SEED MACRO SocketID:REQ, ChannelID:REQ, Byte0Seed:REQ, Byte1Seed:REQ, Byte2Seed:REQ, Byte3Seed:REQ, Byte4Seed:REQ, Byte5Seed:REQ, \ +Byte6Seed:REQ, Byte7Seed:REQ, ByteEccSeed:REQ + DB PSO_RXEN_SEED + DB 20 + DB SocketID + DB ChannelID + DW Byte0Seed + DW Byte1Seed + DW Byte2Seed + DW Byte3Seed + DW Byte4Seed + DW Byte5Seed + DW Byte6Seed + DW Byte7Seed + DW ByteEccSeed +ENDM + +NO_LRDIMM_CS67_ROUTING MACRO SocketID:REQ, ChannelID:REQ + DB PSO_NO_LRDIMM_CS67_ROUTING + DB 3 + DB SocketID + DB ChannelID + DB 1 +ENDM + + +; ***************************************************************************************** +; * +; * CONDITIONAL OVERRIDE TABLE MACROS +; * +; ***************************************************************************************** +CONDITION_AND MACRO + DB PSO_CONDITION_AND + DB 0 +ENDM + +COND_LOC MACRO SocketMsk:REQ, ChannelMsk:REQ, DimmMsk:REQ + DB PSO_CONDITION_LOC + DB 3 + DB SocketMsk + DB ChannelMsk + DB DimmMsk +ENDM + +COND_SPD MACRO Byte:REQ, Mask:REQ, Value:REQ + DB PSO_CONDITION_SPD + DB 3 + DB Byte + DB Mask + DB Value +ENDM + +COND_REG MACRO Access:REQ, Offset:REQ, Mask:REQ, Value:REQ + DB PSO_CONDITION_REG + DB 11 + DB Access + DW Offset + DD Mask + DD Value +ENDM + +ACTION_ODT MACRO Frequency:REQ, Dimms:REQ, QrDimms:REQ, DramOdt:REQ, QrDramOdt:REQ, DramDynOdt:REQ + DB PSO_ACTION_ODT + DB 9 + DD Frequency + DB Dimms + DB QrDimms + DB DramOdt + DB QrDramOdt + DB DramDynOdt +ENDM + +ACTION_ADDRTMG MACRO Frequency:REQ, DimmConfig:REQ, AddrTmg:REQ + DB PSO_ACTION_ADDRTMG + DB 10 + DD Frequency + DW DimmConfig + DD AddrTmg +ENDM + +ACTION_ODCCTRL MACRO Frequency:REQ, DimmConfig:REQ, OdcCtrl:REQ + DB PSO_ACTION_ODCCONTROL + DB 10 + DD Frequency + DW DimmConfig + DD OdcCtrl +ENDM + +ACTION_SLEWRATE MACRO Frequency:REQ, DimmConfig:REQ, SlewRate:REQ + DB PSO_ACTION_SLEWRATE + DB 10 + DD Frequency + DW DimmConfig + DD SlewRate +ENDM + +ACTION_SPEEDLIMIT MACRO DimmConfig:REQ, Dimms:REQ, SpeedLimit15:REQ, SpeedLimit135:REQ, SpeedLimit125:REQ + DB PSO_ACTION_SPEEDLIMIT + DB 9 + DW DimmConfig + DB Dimms + DW SpeedLimit15 + DW SpeedLimit135 + DW SpeedLimit125 +ENDM + +; ***************************************************************************************** +; * +; * END OF CONDITIONAL OVERRIDE TABLE MACROS +; * +; ***************************************************************************************** diff --git a/src/vendorcode/amd/agesa/Legacy/Proc/Dispatcher.c b/src/vendorcode/amd/agesa/Legacy/Proc/Dispatcher.c new file mode 100644 index 0000000000..fed63ed525 --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/Proc/Dispatcher.c @@ -0,0 +1,161 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD binary block interface + * + * Contains the block entry function dispatcher + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Legacy + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "AGESA.h" +#include "amdlib.h" +#include "Dispatcher.h" +#include "Options.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE LEGACY_PROC_DISPATCHER_FILECODE + +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ +extern CONST DISPATCH_TABLE DispatchTable[]; +extern AMD_MODULE_HEADER mCpuModuleID; + +/*---------------------------------------------------------------------------------------*/ +/** + * The Dispatcher is the entry point into the AGESA software. It takes a function + * number as entry parameter in order to invoke the published function + * + * @param[in,out] ConfigPtr + * + * @return AGESA Status. + * + */ +AGESA_STATUS +CALLCONV +AmdAgesaDispatcher ( + IN OUT VOID *ConfigPtr + ) +{ + AGESA_STATUS Status; + IMAGE_ENTRY ImageEntry; + MODULE_ENTRY ModuleEntry; + DISPATCH_TABLE *Entry; + UINT32 ImageStart; + UINT32 ImageEnd; + AMD_IMAGE_HEADER* AltImagePtr; + + Status = AGESA_UNSUPPORTED; + ImageEntry = NULL; + ModuleEntry = NULL; + ImageStart = 0xFFF00000; + ImageEnd = 0xFFFFFFFF; + AltImagePtr = NULL; + + Entry = (DISPATCH_TABLE *) DispatchTable; + while (Entry->FunctionId != 0) { + if ((((AMD_CONFIG_PARAMS *) ConfigPtr)->Func) == Entry->FunctionId) { + Status = Entry->EntryPoint (ConfigPtr); + break; + } + Entry++; + } + + // 2. Try next dispatcher if possible, and we have not already got status back + if ((mCpuModuleID.NextBlock != NULL) && (Status == AGESA_UNSUPPORTED)) { + ModuleEntry = (MODULE_ENTRY) (UINT64) mCpuModuleID.NextBlock->ModuleDispatcher; + if (ModuleEntry != NULL) { + Status = (*ModuleEntry) (ConfigPtr); + } + } + + // 3. If not this image specific function, see if we can find alternative image instead + if (Status == AGESA_UNSUPPORTED) { + if ((((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0xFFFFFFFF ) || (((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr != 0)) { + ImageStart = ((AMD_CONFIG_PARAMS *)ConfigPtr)->AltImageBasePtr; + ImageEnd = ImageStart + 4; + // Locate/test image base that matches this component + AltImagePtr = LibAmdLocateImage ((VOID *) (UINT64)ImageStart, (VOID *) (UINT64)ImageEnd, 4096, AGESA_ID); + if (AltImagePtr != NULL) { + //Invoke alternative Image + ImageEntry = (IMAGE_ENTRY) ((UINT64) AltImagePtr + AltImagePtr->EntryPointAddress); + Status = (*ImageEntry) (ConfigPtr); + } + } + } + + return (Status); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * The host environment interface of callout. + * + * @param[in] Func + * @param[in] Data + * @param[in,out] ConfigPtr + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +CALLCONV +AmdAgesaCallout ( + IN UINT32 Func, + IN UINT32 Data, + IN OUT VOID *ConfigPtr + ) +{ + UINT32 Result; + Result = AGESA_UNSUPPORTED; + if (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr == NULL) { + return Result; + } + + Result = (((AMD_CONFIG_PARAMS *) ConfigPtr)->CalloutPtr) (Func, Data, ConfigPtr); + return (Result); +} diff --git a/src/vendorcode/amd/agesa/Legacy/Proc/Legacy.bat b/src/vendorcode/amd/agesa/Legacy/Proc/Legacy.bat new file mode 100644 index 0000000000..0b79a987c1 --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/Proc/Legacy.bat @@ -0,0 +1,286 @@ +@echo off +echo ***************************************************************************** +echo * +echo * Copyright (c) 2011, Advanced Micro Devices, Inc. +echo * All rights reserved. +echo * +echo * Redistribution and use in source and binary forms, with or without +echo * modification, are permitted provided that the following conditions are met: +echo * * Redistributions of source code must retain the above copyright +echo * notice, this list of conditions and the following disclaimer. +echo * * Redistributions in binary form must reproduce the above copyright +echo * notice, this list of conditions and the following disclaimer in the +echo * documentation and/or other materials provided with the distribution. +echo * * Neither the name of Advanced Micro Devices, Inc. nor the names of +echo * its contributors may be used to endorse or promote products derived +echo * from this software without specific prior written permission. +echo * +echo * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +echo * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +echo * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +echo * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +echo * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +echo * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +echo * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +echo * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +echo * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +echo * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +echo * +echo * *************************************************************************** + + +goto Begin +:Documentation +echo off +echo ************************************************************************** +echo * Legacy.Bat +echo * This batchfile establishes the build environment for an AGESA(TM) +echo * legacy build. +echo * +echo * Syntax: +echo * Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey] [Release^|Debug] [Internal] +echo * Parameters: +echo * %% 1 Solution name. This is the AMD Platform Solution name that +echo * identifies the delivery package. No default, this +echo * parameter MUST be specified. This parameter MUST +echo * be specified before the DevTip Path parameter. +echo * %% 2 Path to the platform specific build directory. This is +echo * where the options file %%Solution%%Options.c is located, +echo * which contains the platform specific build option settings. +echo * If left blank, the default %%Solution%%Options.c file from +echo * the AGESA\Addendum directory is used. +echo * %% 3 Developer's key - open an interactive MSVS window. This parameter is +echo * optional, but when used it requires the first two parameters. +echo * %% 4 Documentation Key - requests a compilation of the DOxygen +echo * documentation files. key is "DOX". This parameter is +echo * optional, but when used it requires the first two parameters. +echo * %% 5 Build Configuration. There are two choices, "Release" and "Debug". +echo * Debug is the default choice if not specified. This parameter is +echo * optional, but when used it requires the first two parameters. +echo * %% 6 Internal solution file select - choose a internal solution file.This parameter +echo * is optional, but when used it requires the first two parameters. +echo * NOTE: The paths MUST have a trailing '\' character. +echo * +echo * The AGESA build environment requires the following environment +echo * variables MUST be defined for proper operation: +echo * $(AGESA_ROOT) - identifies the directory where the AGESA code +echo * is located. The top most dir; where AGESA.h is located. +echo * This must be the full path, eg D:\myPlatform\AGESA\ +echo * **** This var is expected to be set by the caller **** +echo * +echo * $(Solution) - identifies the Platform Solution being targeted +echo * $(AGESA_OptsDir) - identifies the directory where the platform +echo * options and customization files are located. +echo * This must be the full path +echo * +echo * Optional build environment variables +echo * +echo * set AGESA_B1_ADDRESS=0xFFF????? +echo * Sets the B1 image base address in the ROM (otherwise 0xFFFD0000). +echo * set AGESA_B2_ADDRESS=0xFFF????? +echo * Sets the B2 image base address in the ROM (otherwise 0xFFFA0000). +echo * +echo * NOTE: The paths MUST have a trailing '\' character. +echo ************************************************************************** +goto Exit + +:Begin +rem Clear working vars... +set DevKey= +set DoxKey= +set Solution= +set Configuration= + +rem set default to external file prefix none +set SolutionType= + +rem Validate the AGESA_ROOT variable +IF "%AGESA_ROOT%"=="" goto Else001 + rem User has set a path for Agesa_Root, verify that path... + IF EXIST %AGESA_ROOT%Agesa.h goto EndIf002 + rem Try adding trailing '\' + set AGESA_ROOT=%AGESA_ROOT%\ + IF EXIST %AGESA_ROOT%Agesa.h goto EndIf003 + echo Build ERROR: Environment variable AGESA_ROOT is invalid, + echo Build ERROR: Could not find file Agesa.h at: %AGESA_ROOT% + pause + goto Documentation + :EndIf003 + :EndIf002 + goto EndIf001 +:Else001 + echo Build ERROR: Required environment variable missing: AGESA_ROOT + pause + goto Documentation +:EndIf001 + +rem Start processing the input parameters... +:DoLoop + rem Switch (%1) + IF /I "%1"=="DevKey" goto Case001 + IF /I "%1"=="Maranello" goto Case002 + IF /I "%1"=="DevTest" goto Case002 + IF /I "%1"=="Danube" goto Case002 + IF /I "%1"=="DanNi" goto Case002 + IF /I "%1"=="Nile" goto Case002 + IF /I "%1"=="Dragon" goto Case002 + IF /I "%1"=="SanMarino" goto Case002 + IF /I "%1"=="Scorpius" goto Case002 + IF /I "%1"=="Sabine" goto Case002 + IF /I "%1"=="Lynx" goto Case002 + IF /I "%1"=="Brazos" goto Case002 + IF /I "%1"=="DOX" goto Case009 + IF /I "%1"=="Debug" goto Case011 + IF /I "%1"=="Release" goto Case011 + IF /I "%1"=="Internal" goto Case012 + IF "%1"=="" goto Case006 + goto Case004 + :Case001 + rem Case 1: Special command param + set DevKey=DevKey + goto EndSwitch + :Case002 + rem Case 2: Solution name parameter + rem Set the Platform Solution name for the build environment + rem Validation of the names was done by the IF's at the top of DoLoop + set Solution=%1 + goto EndSwitch + :Case004 + rem Case 4: Path param, check for validity + rem Check if parameter matches the default + rem Check for shortcut versions of the default. Also + rem checking for missing trailing '\' + IF /I "%1"=="Addendum" goto Then040 + IF /I "%1"=="Addendum\" goto Then040 + IF /I "%1"=="..\Addendum" goto Then040 + IF /I "%1"=="..\Addendum\" goto Then040 + IF /I "%1"=="..\..\Addendum" goto Then040 + IF /I "%1"=="..\..\Addendum\" goto Then040 + goto Else040 + :Then040 + set AGESA_OptsDir=%AGESA_ROOT%Addendum\ + Echo Build WARNING: User selected the default options path. + goto EndIf040 + :Else040 + set AGESA_OptsDir=%1 + rem Non-default path given, + rem Validate the AGESA_OptsDir parameter ( %%1 = %1 )... + IF /I "%Solution%"=="" goto Else042 + IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf044 + rem Check if param was missing trailing '\'... + set AGESA_OptsDir=%AGESA_OptsDir%\ + IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf045 + rem If using the default, assume the release file is in place. + rem Could not find options file, post an error + Echo Build ERROR: Path to AGESA options file is not valid... + Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c + set AGESA_OptsDir= + set Solution= + exit /B 5 + :EndIf045 + :EndIf044 + goto EndIf042 + :Else042 + rem Else042 - parameter ordering error, need to specify solution before tip path + Echo Build ERROR: The 'Solution' name was not recognized or + Echo The Solution must be specified before the Development tip path + Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey] + exit /B 4 + :EndIf042 + :EndIf040 + goto EndSwitch + :Case006 + rem Case 6: Parameter is blank, end of list + rem Validate the required Environment Variables + IF /I "%Solution%"=="" goto Else066 + IF NOT "%AGESA_OptsDir%"=="" goto Else060 + Rem No path param specified. Use the default file shipped with the AGESA package... + Echo Build WARNING: Using default options file. + set AGESA_OptsDir=%AGESA_ROOT%Addendum\ + goto EndIf060 + :Else060 + rem Else060 - tip path may have been set by caller prior to call, + rem Validate the AGESA_OptsDir parameter ( %%AGESA_OptsDir = %AGESA_OptsDir% )... + IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf061 + rem Check if param was missing trailing '\'... + set AGESA_OptsDir=%AGESA_OptsDir%\ + IF EXIST %AGESA_OptsDir%%Solution%Options.c goto EndIf062 + rem If using the default, assume the release file is in place. + rem Could not find options file, post an error + Echo Build ERROR: Path to AGESA options file is not valid... + Echo . . Could not find options file: %AGESA_OptsDir%%Solution%Options.c + set AGESA_OptsDir= + set Solution= + exit /B 4 + :EndIf062 + :EndIf061 + :EndIf060 + goto EndIf066 + :Else066 + rem Else066 - parameter missing error, need to specify 'solution' + Echo Build ERROR: The Platform Solution name must be specified: + Echo . . . Legacy.bat Solution [DevTipPath] [DevKey] [DoxKey] + exit /B 4 + :EndIf066 + goto EndDo + :Case009 + rem Case 9: Documentation generation key + set DoxKey=DoxKey + goto EndSwitch + :Case011 + rem Case 11: Build Configuration + set Configuration=%1 + goto EndSwitch + :Case012 + rem Case 12: Select Internal solution file prefix + set SolutionType=%1 + goto EndSwitch + :EndSwitch + SHIFT + goto DoLoop +:EndDo + +rem # Ensure that Microsoft Visual Studio 2005 is installed on this machine. +IF NOT "%VS80COMNTOOLS%"=="" goto EndIf95 +echo --------------------------------------------------------------------- +echo - Building AGESA ARCH2008 requires Microsoft Visual Studio 2005 - +echo - Install Visual Studio 2005 and confirm environment - +echo - variable VS80COMNTOOLS is present. - +echo --------------------------------------------------------------------- +pause +exit +:EndIf95 + +rem set the Visual Studio 32-bit development environment +call "%VS80COMNTOOLS%vsvars32.bat" + +rem Launch the documentation generator if selected by the user +IF NOT "%DoxKey%"=="DoxKey" goto EndIf100 + devenv %AGESA_ROOT%Proc\AgesaDoc.sln /Rebuild "Release|Win32" +:EndIf100 + +rem Use the default build configuration if none was specified. +IF NOT "%Configuration%"=="" goto EndIf110 + set Configuration=Debug +:EndIf110 + +rem Check image bases +IF NOT "%AGESA_B1_ADDRESS%"=="" goto EndIf120 + set AGESA_B1_ADDRESS=0xFFFD0000 +:EndIf120 +IF NOT "%AGESA_B2_ADDRESS%"=="" goto EndIf130 + set AGESA_B2_ADDRESS=0xFFFA0000 +:EndIf130 + +rem Check if the 'secret' developers' key was used, open an interactive VS window +IF NOT "%DevKey%"=="DevKey" goto Else140 + set DevKey= + rem This is the command to open an interactive development window ... + start /NORMAL devenv.exe %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /ProjectConfig "%Configuration%|Win32" + goto EndIf140 +:Else140 + rem Else140 - This is the command to perform a background or automated build ... + devenv %AGESA_ROOT%Legacy\Proc\%Solution%%SolutionType%Legacy.sln /Rebuild "%Configuration%|Win32" +:EndIf140 +:Exit +exit /B 0 diff --git a/src/vendorcode/amd/agesa/Legacy/Proc/agesaCallouts.c b/src/vendorcode/amd/agesa/Legacy/Proc/agesaCallouts.c new file mode 100644 index 0000000000..ffb712ef0b --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/Proc/agesaCallouts.c @@ -0,0 +1,397 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD CPU AGESA Callout Functions + * + * Contains code to set / get useful platform information. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: Common + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ +#include "AGESA.h" +#include "cpuRegisters.h" +#include "Dispatcher.h" +#include "cpuServices.h" +#include "Ids.h" +#include "Filecode.h" + +#define FILECODE LEGACY_PROC_AGESACALLOUTS_FILECODE +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S - (AGESA ONLY) + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------*/ +/** + * + * Call the host environment interface to do the warm or cold reset. + * + * @param[in] ResetType Warm or Cold Reset is requested + * @param[in,out] StdHeader Config header + * + */ +VOID +AgesaDoReset ( + IN UINTN ResetType, + IN OUT AMD_CONFIG_PARAMS *StdHeader + ) +{ + AGESA_STATUS Status; + WARM_RESET_REQUEST Request; + + // Clear warm request bit and set state bits to the current post stage + GetWarmResetFlag (StdHeader, &Request); + Request.RequestBit = FALSE; + Request.StateBits = Request.PostStage; + SetWarmResetFlag (StdHeader, &Request); + + Status = AmdAgesaCallout (AGESA_DO_RESET, (UINT32)ResetType, (VOID *) StdHeader); +} + +/*---------------------------------------------------------------------------------------*/ +/** + * + * Call the host environment interface to allocate buffer in main system memory. + * + * @param[in] FcnData + * @param[in,out] AllocParams Heap manager parameters + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaAllocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *AllocParams + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_ALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) AllocParams); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to deallocate buffer in main system memory. + * + * @param[in] FcnData + * @param[in,out] DeallocParams Heap Manager parameters + * + * @return The AGESA Status returned from the callout. + */ +AGESA_STATUS +AgesaDeallocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *DeallocParams + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_DEALLOCATE_BUFFER, (UINT32)FcnData, (VOID *) DeallocParams); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * + * Call the host environment interface to Locate buffer Pointer in main system memory + * + * @param[in] FcnData + * @param[in,out] LocateParams Heap manager parameters + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaLocateBuffer ( + IN UINTN FcnData, + IN OUT AGESA_BUFFER_PARAMS *LocateParams + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_LOCATE_BUFFER, (UINT32)FcnData, (VOID *) LocateParams); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to launch APs + * + * @param[in] ApicIdOfCore + * @param[in,out] LaunchApParams + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaRunFcnOnAp ( + IN UINTN ApicIdOfCore, + IN AP_EXE_PARAMS *LaunchApParams + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_RUNFUNC_ONAP, (UINT32)ApicIdOfCore, (VOID *) LaunchApParams); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to read an SPD's content. + * + * @param[in] FcnData + * @param[in,out] ReadSpd + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaReadSpd ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_READ_SPD, (UINT32)FcnData, ReadSpd); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to read an SPD's content. + * + * @param[in] FcnData + * @param[in,out] ReadSpd + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaReadSpdRecovery ( + IN UINTN FcnData, + IN OUT AGESA_READ_SPD_PARAMS *ReadSpd + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_READ_SPD_RECOVERY, (UINT32)FcnData, ReadSpd); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to provide a user hook opportunity. + * + * @param[in] FcnData + * @param[in,out] MemData + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaHookBeforeDramInitRecovery ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY, (UINT32)FcnData, MemData); + + return Status; +} + + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to provide a user hook opportunity. + * + * @param[in] FcnData + * @param[in,out] MemData + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaHookBeforeDramInit ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DRAM_INIT, (UINT32)FcnData, MemData); + + return Status; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to provide a user hook opportunity. + * + * @param[in] FcnData + * @param[in,out] MemData + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaHookBeforeDQSTraining ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_HOOKBEFORE_DQS_TRAINING, (UINT32)FcnData, MemData); + + return Status; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to provide a user hook opportunity. + * + * @param[in] FcnData + * @param[in,out] MemData + * + * @return The AGESA Status returned from the callout. + * + */ +AGESA_STATUS +AgesaHookBeforeExitSelfRefresh ( + IN UINTN FcnData, + IN OUT MEM_DATA_STRUCT *MemData + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_HOOKBEFORE_EXIT_SELF_REF, (UINT32)FcnData, MemData); + + return Status; +} + +/*---------------------------------------------------------------------------------------*/ +/** + * Call the host environment interface to provide a user hook opportunity. + * + * @param[in] Data + * @param[in,out] IdsCalloutData + * + * @return The AGESA Status returned from the callout. + * + */ + + +AGESA_STATUS +AgesaGetIdsData ( + IN UINTN Data, + IN OUT IDS_CALLOUT_STRUCT *IdsCalloutData + ) +{ + AGESA_STATUS Status; + + Status = AmdAgesaCallout (AGESA_GET_IDS_INIT_DATA, (UINT32)Data, IdsCalloutData); + + return Status; +} + + +/*----------------------------------------------------------------------------------------*/ +/** + * PCIE slot reset control + * + * + * + * @param[in] FcnData Function data + * @param[in] ResetInfo Reset information + * @retval Status Agesa status + */ + +AGESA_STATUS +AgesaPcieSlotResetControl ( + IN UINTN FcnData, + IN PCIe_SLOT_RESET_INFO *ResetInfo + ) +{ + AGESA_STATUS Status; + Status = AmdAgesaCallout (AGESA_GNB_PCIE_SLOT_RESET, (UINT32) FcnData, ResetInfo); + return Status; +}
\ No newline at end of file diff --git a/src/vendorcode/amd/agesa/Legacy/Proc/arch2008.asm b/src/vendorcode/amd/agesa/Legacy/Proc/arch2008.asm new file mode 100644 index 0000000000..d30790621c --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/Proc/arch2008.asm @@ -0,0 +1,2674 @@ +;***************************************************************************** +; AMD Generic Encapsulated Software Architecture +; +; Workfile: arch2008.asm $Revision: 37157 $ $Date: 2010-09-01 03:24:07 +0800 (Wed, 01 Sep 2010) $ +; +; Description: ARCH2008.ASM - AGESA Architecture 2008 Wrapper Template +; +;***************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;***************************************************************************** + + .XLIST + INCLUDE agesa.inc + INCLUDE acwrapg.inc ; Necessary support file as part of wrapper, including but not limited to segment start/end macros. + INCLUDE acwrap.inc ; IBVs may specify host BIOS-specific include files required when building. + INCLUDE cpcarmac.inc + INCLUDE bridge32.inc + .LIST + .586p + .mmx + + +;---------------------------------------------------------------------------- +; Local definitions +;---------------------------------------------------------------------------- + +sOemCallout STRUCT + FuncName DD ? ; Call out function name + FuncPtr DW ? ; Call out function pointer +sOemCallout ENDS + +sOemEventHandler STRUCT + ClassCode DD ? ; AGESA event log sub-class code + FuncPtr DW ? ; Event handler function pointer +sOemEventHandler ENDS + +;; A typical legacy BIOS implementation may require the E000 and F000 segments +;; to be cached. +EXE_CACHE_REGION_BASE_0 EQU 0E0000h +EXE_CACHE_REGION_SIZE_0 EQU 20000h + +;; In this sample implementation, the B1 and B2 images are placed next to each +;; other in the BIOS ROM to help with the maximization of cached code. +EXE_CACHE_REGION_BASE_1 EQU AGESA_B1_ADDRESS +EXE_CACHE_REGION_SIZE_1 EQU 40000h + +;; The third region is not needed in our example. +EXE_CACHE_REGION_BASE_2 EQU 0 +EXE_CACHE_REGION_SIZE_2 EQU 0 + + +;---------------------------------------------------------------------------- +; PERSISTENT SEGMENT +; This segment is required to be present throughout all BIOS execution. +;---------------------------------------------------------------------------- + +AMD_PERSISTENT_START + + +;---------------------------------------------------------------------------- +; Instantiate the global descriptor table +;---------------------------------------------------------------------------- + +AMD_BRIDGE_32_GDT AMD_GDT ; Instantiate the global descriptor table + ; required by the push-high mechanism. + + +;---------------------------------------------------------------------------- +; Declare the external routines required in the persistent segment +;---------------------------------------------------------------------------- + +;+------------------------------------------------------------------------- +; +; AmdDfltRet +; +; Entry: +; None +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; Near stub procedure. Simply perform a retn instruction. +; +EXTERN AmdDfltRet:NEAR + + +;+------------------------------------------------------------------------- +; +; AmdDfltRetFar +; +; Entry: +; None +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; Far stub procedure. Simply perform a retf instruction. +; +EXTERN AmdDfltRetFar:FAR + + +;---------------------------------------------------------------------------- +; Declare the optional external routines in the persistent segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; myModuleTypeMismatchHandler (Example) +; +; Entry: +; ESI - Pointer to the EVENT_PARAMS structure of the failure. +; [ESI].DataParam1 - Socket +; [ESI].DataParam2 - DCT +; [ESI].DataParam3 - Channel +; [ESI].DataParam4 - 0x00000000 +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; This procedure can be used to react to a memory module type +; mismatch error discovered by the AGESA code. Actions taken +; may include, but are not limited to: +; Logging the event to NV for display later +; Reset, excluding the mismatch on subsequent reboot +; Do nothing +; +; Dependencies: +; None +; +EXTERN myModuleTypeMismatchHandler(AmdDfltRet):NEAR + +;+--------------------------------------------------------------------------- +; +; oemPlatformConfigInit (Optional) +; +; Entry: +; EDI - 32-bit flat pointer to the PLATFORM_CONFIGURATION to be +; passed in to the next AGESA entry point. +; +; typedef struct { +; IN PERFORMANCE_PROFILE PlatformProfile; +; IN CPU_HT_DEEMPHASIS_LEVEL *PlatformDeemphasisList; +; IN UINT8 CoreLevelingMode; +; IN PLATFORM_C1E_MODES C1eMode; +; IN UINT32 C1ePlatformData; +; IN UINT32 C1ePlatformData1; +; IN UINT32 C1ePlatformData2; +; IN BOOLEAN UserOptionDmi; +; IN BOOLEAN UserOptionPState; +; IN BOOLEAN UserOptionSrat; +; IN BOOLEAN UserOptionSlit; +; IN BOOLEAN UserOptionWhea; +; IN UINT32 PowerCeiling; +; IN BOOLEAN PstateIndependent; +; } PLATFORM_CONFIGURATION; +; +; typedef struct { +; IN UINT8 Socket; +; IN UINT8 Link; +; IN UINT8 LoFreq; +; IN UINT8 HighFreq; +; IN PLATFORM_DEEMPHASIS_LEVEL ReceiverDeemphasis; +; IN PLATFORM_DEEMPHASIS_LEVEL DcvDeemphasis; +; } CPU_HT_DEEMPHASIS_LEVEL; +; +; typedef struct { +; IN PLATFORM_CONTROL_FLOW PlatformControlFlowMode; +; IN BOOLEAN UseHtAssist; +; IN BOOLEAN UseAtmMode; +; IN BOOLEAN Use32ByteRefresh; +; IN BOOLEAN UseVariableMctIsocPriority; +; } PERFORMANCE_PROFILE; +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; Provide a single hook routine to modify the parameters of a +; PLATFORM_CONFIGURATION structure before any entry point that +; has such a structure as an input. +; +; Dependencies: +; None +; +; Example: +; If your platform is running in UMA mode, the following code +; may be added: +; mov (PLATFORM_CONFIGURATION PTR [edi]).PlatformProfile.PlatformControlFlowMode, UmaDr +; +EXTERN oemPlatformConfigInit(AmdDfltRetFar):FAR + +;+--------------------------------------------------------------------------- +; +; oemCallout (Optional) +; +; Entry: +; ECX - Callout function number +; EDX - Function-specific UINTN +; ESI - Pointer to function specific data +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; The default call out router function which resides in the same +; segment as the push-high bridge code. +; +; Dependencies: +; None +; +EXTERN oemCallout(AmdDfltRet):NEAR + + +;---------------------------------------------------------------------------- +; Define the sample wrapper routines for the persistent segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; AmdBridge32 +; +; Entry: +; EDX - A Real Mode FAR pointer using seg16:Offset16 format that +; points to a local host environment call-out router. If +; this pointer is not equal to zero, then this pointer is +; used as the call-out router instead of the standard +; OemCallout. This may be useful when the call-out router +; is not located in the same segment as the AmdBridge32 and +; AmdCallout16 routines. +; ESI - A Flat Mode pointer (32-bit address) that points to the +; configuration block (AMD_CONFIG_PARAMS) for the AGESA +; software function. +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; Execute an AGESA software function through the Push-High interface. +; +; Dependencies: +; This procedure requires a stack. The host environment must use the +; provided service function to establish the stack environment prior +; to making the call to this procedure. +; +AmdBridge32 PROC FAR PUBLIC + AMD_BRIDGE_32 AMD_GDT ; use the macro for the body + ret +AmdBridge32 ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdEnableStack +; +; Entry: +; BX - Return address +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; SS:ESP - Points to the private stack location for this processor core. +; ECX - Upon success, contains this processor core's stack size in bytes. +; +; Modified: +; EAX, ECX, EDX, EDI, ESI, ESP, DS, ES +; +; Purpose: +; This procedure is used to establish the stack within the host environment. +; +; Dependencies: +; The host environment must use this procedure and not rely on any other +; sources to create the stack region. +; +AmdEnableStack PROC NEAR PUBLIC + AMD_ENABLE_STACK + ;; EAX = AGESA_SUCCESS, The stack space has been allocated for this core. + ;; EAX = AGESA_WARNING, The stack has already been set up. SS:ESP is set + ;; to stack top, and ECX is the stack size in bytes. + jmp bx +AmdEnableStack ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdDisableStack +; +; Entry: +; BX - Return address +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; EAX, ECX, EDX, ESI, ESP +; +; Purpose: +; This procedure is used to remove the pre-memory stack from within the +; host environment. +; The exit state for the BSP is described as follows: +; Memory region 00000-9FFFF MTRRS are set as WB memory. +; Processor Cache is enabled (CD bit is cleared). +; MTRRs used for execution cache are kept. +; Cache content is flushed (invalidated without write-back). +; Any family-specific clean-up done. +; The exit state for the APs is described as follows: +; Memory region 00000-9FFFF MTRRS are set as WB memory. +; Memory region A0000-DFFFF MTRRS are set as UC IO. +; Memory region E0000-FFFFF MTRRS are set as UC memory. +; MTRRs used for execution cache are cleared. +; Processor Cache is disabled (CD bit is set). +; Top-of-Memory (TOM) set to the system top of memory as determined +; by the memory initialization routines. +; System lock command is enabled. +; Any family-specific clean-up done. +; +; Dependencies: +; The host environment must use this procedure and not rely on any other +; sources to break down the stack region. +; If executing in 16-bit code, the host environment must establish the +; "Big Real" mode of 32-bit addressing of data. +; +AmdDisableStack PROC NEAR PUBLIC + AMD_DISABLE_STACK + ;; EAX = AGESA_SUCCESS, The stack space has been disabled for this core. + jmp bx +AmdDisableStack ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdCallout16 +; +; Entry: +; [esp+8] - Func +; [esp+12] - Data +; [esp+16] - Configuration Block +; [esp+4] - Return address to AGESA +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; Execute callback from the push-high interface. +; +; Dependencies: +; None +; +AmdCallout16 PROC FAR PUBLIC ; declare the procedure + AMD_CALLOUT_16 oemCallout ; use the macro for the body + ret +AmdCallout16 ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdProcessAgesaErrors (Optional) +; +; Entry: +; AL - Heap status of the AGESA entry point that was just invoked. +; EBX - AGESA image base address. +; EDX - Segment / Offset of the appropriate callout router function. +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; This procedure is used to handle any errors that may have occurred +; during an AGESA entry point. +; +; Dependencies: +; None +; +AmdProcessAgesaErrors PROC FAR PUBLIC + LOCAL localCpuInterfaceBlock:EVENT_PARAMS + + pushad + xor edi, edi + mov di, ss + shl edi, 4 + lea esi, localCpuInterfaceBlock + add esi, edi + + ; Fill default config block + mov (EVENT_PARAMS PTR [esi]).StdHeader.Func, AMD_READ_EVENT_LOG + mov (EVENT_PARAMS PTR [esi]).StdHeader.ImageBasePtr, ebx + mov (EVENT_PARAMS PTR [esi]).StdHeader.AltImageBasePtr, 0 + mov (EVENT_PARAMS PTR [esi]).StdHeader.HeapStatus, al + mov edi, SEG AmdCallout16 + shl edi, 4 + add edi, OFFSET AmdCallout16 + mov (EVENT_PARAMS PTR [esi]).StdHeader.CalloutPtr, edi + + ; Flush the event log searching for, and handling all monitored events + xor eax, eax + .while (eax == 0) + push edx + call AmdBridge32 + pop edx + .if (eax == AGESA_SUCCESS) + mov eax, (EVENT_PARAMS PTR [esi]).EventInfo + .if (eax != 0) + lea di, cs:AgesaEventTable + +loopThruTable: + cmp di, OFFSET cs:AgesaEventTableEnd + jae unhandledEvent + + cmp eax, cs:[di].sOemEventHandler.ClassCode + je FoundMatch + add di, SIZEOF sOemEventHandler + jmp loopThruTable + +FoundMatch: + mov bx, cs:[di].sOemEventHandler.FuncPtr + call bx + +unhandledEvent: + xor eax, eax + .else + mov al, 1 + .endif + .endif + .endw + popad + ret + +AmdProcessAgesaErrors ENDP + + +;---------------------------------------------------------------------------- +; Define the error handler table +;---------------------------------------------------------------------------- + +AgesaEventTable LABEL BYTE + ;; Add entries as desired + ;;--------- + ;; EXAMPLE + ;;--------- + sOemEventHandler <MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, OFFSET myModuleTypeMismatchHandler> +AgesaEventTableEnd LABEL BYTE + + +AMD_PERSISTENT_END + + + + +;---------------------------------------------------------------------------- +; RECOVERY SEGMENT +; This segment resides in the classic 'boot-block,' and is used +; for recovery. +;---------------------------------------------------------------------------- + +AMD_RECOVERY_START + + +;---------------------------------------------------------------------------- +; Declare the external routines required in the recovery segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; myReadSPDRecovery (Required for proper recovery mode operation) +; +; Entry: +; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure. +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT8 SocketId; +; IN UINT8 MemChannelId; +; IN UINT8 DimmId; +; IN OUT UINT8 *Buffer; +; IN OUT MEM_DATA_STRUCT *MemData; +; } AGESA_READ_SPD_PARAMS; +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS Indicates the SPD block for the indicated +; DIMM was read successfully. +; AGESA_BOUNDS_CHK The specified DIMM is not present. +; AGESA_UNSUPPORTED This is a required function, so this +; value being returned causes a critical +; error response value from the AGESA +; software function and no memory initialized. +; AGESA_ERROR The DIMM SPD read process has generated +; communication errors. +; +; Modified: +; None +; +; Purpose: +; This call out reads a block of memory SPD data and places it +; into the provided buffer. +; +; Dependencies: +; None +; +EXTERN myReadSPDRecovery:NEAR + + +;---------------------------------------------------------------------------- +; Define the sample wrapper routines for the recovery segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; AmdInitResetWrapper +; +; Entry: +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; A minimal initialization of the processor core is performed. This +; procedure must be called by all processor cores. The code path +; separates the BSP from the APs and performs a separate and appropriate +; list of tasks for each class of core. +; For the BSP, the following actions are performed: +; Internal heap sub-system initialization +; Primary non-coherent HyperTransportT link initialization +; Return to the host environment to test for Recovery Mode. +; The AP processor cores do not participate in the recovery process. +; However, they execute this routine after being released to execute +; by the BSP during the main boot process. Their actions include the +; following: +; Internal heap sub-system initialization +; Proceed to a wait loop waiting for commands from the BSP +; +; For the cache regions, up to three regions of execution cache can be +; allocated following the following rules: +; 1. Once a region is allocated, it cannot be de-allocated. However, it +; can be expanded. +; 2. At most, two of the three regions can be located above 1 MByte. A +; region failing this rule is ignored. +; 3. All region addresses must be at or above the 0x000D0000 linear +; address. A region failing this rule is ignored. +; 4. The address is aligned on a 32-KByte boundary. Starting addresses +; is rounded down to the nearest 32-Kbyte boundary. +; 5. The execution cache size must be a multiple of 32 KByte. Size is +; rounded up to the next multiple of 32 KByte. +; 6. A region must not span either the 1-MByte boundary or the 4-GByte +; boundary. Allocated size is truncated to not span the boundary. +; 7. The granted cached execution regions, address, and size are calculated +; based on the available cache resources of the processor core. +; Allocations are made up to the limit of cache available on the +; installed processor. +; Warning: Enabling instruction cache outside of this interface can cause +; data corruption. +; +; Dependencies: +; This procedure is expected to be executed soon after a system reset +; for the main boot path or resume path of execution. +; +; This procedure requires a stack. +; +; Because the heap system is not yet operational at the point of the +; interface call, the host environment must allocate the storage for +; the AMD_RESET_PARAMS structure before making the first call to +; AmdCreateStruct. This is the ByHost method of allocation. +; +AmdInitResetWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + local localResetParams:AMD_RESET_PARAMS + + pushad + + ; Prepare for the call to initialize the input parameters for AmdInitReset + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + ; Use the 'ByHost' allocation method because the heap has not been initialized as of yet. + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESET + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, ByHost + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, sizeof AMD_RESET_PARAMS + lea edx, localResetParams + add edx, eax + push edx + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr, edx + mov dx, SEG AmdCalloutRouterRecovery + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterRecovery + push edx + call AmdBridge32 + pop edx + pop esi + + ; The structure has been initialized. Now modify the default settings as desired. + + ; Allocate the execution cache to maximize the amount of code in ROM that is cached. + ; Placing the B1 and B2 images near one another is a good way to ensure the AGESA code + ; is cached. + mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_0 + mov (AMD_RESET_PARAMS ptr [esi]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_0 + mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_1 + mov (AMD_RESET_PARAMS ptr [esi + sizeof EXECUTION_CACHE_REGION]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_1 + mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheStartAddr, EXE_CACHE_REGION_BASE_2 + mov (AMD_RESET_PARAMS ptr [esi + (2 * sizeof EXECUTION_CACHE_REGION)]).CacheRegion.ExeCacheSize, EXE_CACHE_REGION_SIZE_2 + + ; Call in to the AmdInitReset entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS Early initialization completed successfully. + ;; AGESA_WARNING One or more of the execution cache allocation + ;; rules were violated, but an adjustment was made + ;; and space was allocated. + ;; AGESA_ERROR One or more of the execution cache allocation rules + ;; were violated, which resulted in a requested cache + ;; region to not be allocated. + ;; The storage space allocated for the AMD_RESET_PARAMS + ;; structure is insufficient. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_RESET_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B1_ADDRESS + call AmdProcessAgesaErrors + .endif + + + ;; Here are what the MTRRs should look like based off of the CacheRegions specified above: + + ;; Fixed-Range MTRRs + ;; Name Address Value + ;; ---------------- -------- ---------------- + ;; MTRRfix4k_E0000 0000026C 0505050505050505 + ;; MTRRfix4k_E8000 0000026D 0505050505050505 + ;; MTRRfix4k_F0000 0000026E 0505050505050505 + ;; MTRRfix4k_F8000 0000026F 0505050505050505 + ;; MTRRdefType 000002FF 0000000000000C00 + ;; + ;; Variable-Range MTRRs and IO Range + ;; MTRRphysBase(n) MTRRphysMask(n) + ;; ----------------- ----------------- + ;; n=0 0000000000000000 0000000000000000 + ;; n=1 0000000000000000 0000000000000000 + ;; n=2 0000000000000000 0000000000000000 + ;; n=3 0000000000000000 0000000000000000 + ;; n=4 0000000000000000 0000000000000000 + ;; n=5 Heap Base (Varies by core) 0000FFFFFFFF0800 + ;; n=6 AGESA_B1_ADDRESS | 6 0000FFFFFFFC0800 + ;; n=7 0000000000000000 0000000000000000 + + + ;; Because the allocation method is 'ByHost,' the call to AMD_RELEASE_STRUCT is + ;; not necessary. Stack space reclamation is left up to the host BIOS. + + popad + ret + + +AmdInitResetWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdInitRecoveryWrapper +; +; Entry: +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; Perform a minimum initialization of the processor and memory to +; support a recovery mode flash ROM update. +; For the BSP, the following actions are performed: +; Configuration of CPU core for recovery process +; Minimal initialization of some memory +; The AP processor cores do not participate in the recovery process. +; No actions or tasks are performed by the AP cores for this time point. +; +; Dependencies: +; This procedure requires a stack. The host environment must use one of +; the provided service functions to establish the stack environment prior +; to making the call to this procedure. +; +AmdInitRecoveryWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitRecovery + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B1_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RECOVERY + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterRecovery + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterRecovery + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + + ; Call in to the AmdInitRecovery entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + ;; AGESA_WARNING One or more of the allocation rules were violated, + ;; but an adjustment was made and space was allocated. + ;; AGESA_ERROR One or more of the allocation rules were violated, + ;; which resulted in a requested cache region to not be + ;; allocated. + ;; AGESA_FATAL No memory was found in the system. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_RECOVERY_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B1_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdInitRecovery + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + popad + ret +AmdInitRecoveryWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdCalloutRouterRecovery +; +; Entry: +; ECX - Callout function number +; EDX - Function-specific UINTN +; ESI - Pointer to function specific data +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; The call out router function for AmdInitReset and +; AmdInitRecovery. +; +; Dependencies: +; None +; +AmdCalloutRouterRecovery PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES + xor ax, ax + mov ds, ax + mov es, ax + lea di, cs:CalloutRouterTableRecovery + mov eax, AGESA_UNSUPPORTED + +loopThruTable: + cmp di, OFFSET cs:CalloutRouterTableRecoveryEnd + jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED + cmp ecx, cs:[di].sOemCallout.FuncName + je FoundMatch + add di, SIZEOF sOemCallout + jmp loopThruTable + +FoundMatch: + mov bx, cs:[di].sOemCallout.FuncPtr + call bx + +amdCpuCalloutExit: + ret +AmdCalloutRouterRecovery ENDP + + +;---------------------------------------------------------------------------- +; Define the callout dispatch table for the recovery segment +;---------------------------------------------------------------------------- + +CalloutRouterTableRecovery LABEL BYTE + ;; Standard B1 implementations only need the SPD reader call out function to be implemented. + sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDRecovery> +CalloutRouterTableRecoveryEnd LABEL BYTE + + +AMD_RECOVERY_END + + + +;---------------------------------------------------------------------------- +; PRE-MEMORY SEGMENT +; This segment must be uncompressed in the ROM image. +;---------------------------------------------------------------------------- + +AMD_PREMEM_START + + +;---------------------------------------------------------------------------- +; Declare the external routines required in the recovery segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; myReadSPDPremem (Required) +; +; Entry: +; ESI - Pointer to an AGESA_READ_SPD_PARAMS structure +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT8 SocketId; +; IN UINT8 MemChannelId; +; IN UINT8 DimmId; +; IN OUT UINT8 *Buffer; +; IN OUT MEM_DATA_STRUCT *MemData; +; } AGESA_READ_SPD_PARAMS; +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS Indicates the SPD block for the indicated +; DIMM was read successfully. +; AGESA_BOUNDS_CHK The specified DIMM is not present. +; AGESA_UNSUPPORTED This is a required function, so this +; value being returned causes a critical +; error response value from the AGESA +; software function and no memory initialized. +; AGESA_ERROR The DIMM SPD read process has generated +; communication errors. +; +; Modified: +; None +; +; Purpose: +; This call out reads a block of memory SPD data and places it +; into the provided buffer. +; +; Dependencies: +; None +; +EXTERN myReadSPDPremem:NEAR + +;+------------------------------------------------------------------------- +; +; AmdDfltRetPremem +; +; Entry: +; None +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; Near stub procedure in the prememory segment. Simply perform a +; retn instruction. +; +EXTERN AmdDfltRetPremem:NEAR + +;+--------------------------------------------------------------------------- +; +; myDoReset (Required) +; +; Entry: +; EDX - Reset type +; 1 - Warm reset whenever +; 2 - Cold reset whenever +; 3 - Warm reset immediately +; 4 - Cold reset immediately +; ESI - Pointer to an AMD_CONFIG_PARAMS structure. +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_UNSUPPORTED This is a required function, so this +; value being returned causes a critical +; error response value from the AGESA +; software function. +; +; Modified: +; None +; +; Purpose: +; This host environment function must initiate the specified type +; of system reset. +; +; Implementation of this function by the host environment is +; REQUIRED. Some host environments may record this as a request +; allowing other elements in the system to perform some additional +; tasks before the actual reset is issued. +; +; Dependencies: +; The AMD processor contains 3 bits (BiosRstDet[2:0]) in a PCI +; register (F0x6C Link Initialization Control Register) that +; indicate the reset status. These bits are reserved for use by +; the AGESA software and should not be modified by the host +; environment. +; +EXTERN myDoReset:NEAR + + +;+--------------------------------------------------------------------------- +; +; myGetNonVolatileS3Context (Required for proper S3 operation) +; +; Entry: +; None +; +; Exit: +; EBX - Pointer to the non-volatile S3 context block +; ECX - Size in bytes of the non-volatile S3 context block +; +; Modified: +; None +; +; Purpose: +; The host environment must return the pointer to the data +; saved during the mySaveNonVolatileS3Context routine. +; +; Dependencies: +; None +; +EXTERN myGetNonVolatileS3Context:NEAR + + +;---------------------------------------------------------------------------- +; Declare the optional external routines in the prememory segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; myAgesaHookBeforeExitSelfRefresh (Optional) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 44h +; ESI - Pointer to a data structure containing the memory information +; +; Exit: +; After returning control to AGESA, AGESA will display: - AGESA_TESTPOINT - 45h +; EAX - Contains the AGESA_STATUS return code +; AGESA_SUCCESS The function has completed successfully +; AGESA_UNSUPPORTED This function is not implemented by the host environment +; AGESA_WARNING A non-critical issue has occued in the host environment +; +; Modified: +; None +; +; Purpose: +; General purpose hook called before the exiting self refresh +; This procedure is called once per channel +; +; Implementation of this function is optional for the host environment +; This call-out is an opportunity for the host environment to make dynamic +; modifications to the memory timing settings specific to the board or host +; environment before exiting self refresh on S3 resume +; +; Dependencies: +; This procedure is called before the exit self refresh bit is set in the resume +; sequence. The host environment must initiate the OS restart process. This procedure +; requires a stack. The host environment must establish the stack environment prior +; to making the call to this procedure +; +EXTERN myAgesaHookBeforeExitSelfRefresh(AmdDfltRetPremem):NEAR + + +;+--------------------------------------------------------------------------- +; +; myHookBeforeDramInit (Optional) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 40h +; ESI - Pointer to a data structure containing the memory information +; +; Exit: +; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 41h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_UNSUPPORTED This function is not implemented by the host environment +; +; Modified: +; None +; +; Purpose: +; General-purpose hook called before the DRAM_Init bit is set. Called +; once per MCT +; +; Implementation of this function is optional for the host environment +; This call-out is an opportunity for the host environment to make +; dynamic modifications to the memory timing settings specific to the +; board or host environment +; +; Dependencies: +; None +; +EXTERN myHookBeforeDramInit(AmdDfltRetPremem):NEAR + + +;+--------------------------------------------------------------------------- +; +; myHookBeforeDQSTraining (Optional) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - 42h +; ESI - Pointer to a data structure containing the memory information. +; +; Exit: +; After returning control to AGESA, AGESA will display - AGESA_TESTPOINT - 43h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_UNSUPPORTED This function is not implemented by the +; host environment. +; +; Modified: +; None +; +; Purpose: +; General-purpose hook called just before the memory training processes +; begin. Called once per MCT. +; +; Implementation of this function is optional for the host environment. +; This call-out is an opportunity for the host environment to make +; dynamic modifications to the memory timing settings specific to the +; board or host environment. +; +; The host environment may also use this call-out for some board- +; specific features that should be activated at this time point, +; such as: +; Low voltage DIMMs-the host environment should set the recommended +; voltages found in the memory data structure for each memory +; channel. This needs to occur before training begins. +; +; Dependencies: +; None +; +EXTERN myHookBeforeDQSTraining(AmdDfltRetPremem):NEAR + + +;---------------------------------------------------------------------------- +; Define the sample wrapper routines for the prememory segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; AmdInitEarlyWrapper +; +; Entry: +; On Entry to "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C4h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitEarly" AGESA will display AGESA_TESTPOINT - C5h +; None +; +; Modified: +; None +; +; Purpose: +; A full initialization of the processor is performed. Action details +; differ for the BSP and AP processor cores. +; For the BSP, the following actions are performed: +; Full HyperTransportT link initialization, coherent and non-coherent +; Processor register loading +; Microcode patch load +; Errata workaround processing +; Launch all processor cores +; Configure the processor power management capabilities +; Request a warm reset if needed +; For the AP, the following actions are performed: +; Processor register loading +; Microcode patch load +; Errata workaround processing +; Configure the processor power management capabilities +; +; Dependencies: +; This procedure is expected to be called before main memory initialization +; and before the system warm reset. Prior to this, the basic configuration +; done by the AmdInitReset routine must be completed. +; +; This procedure requires a stack. The host environment must use one of the +; provided service functions to establish the stack environment prior to +; making the call to this procedure. +; +; The processes performed at this time point require communication between +; processor cores. +; +; The host environment must recognize that all processor cores are running +; in parallel and avoid activities that might interfere with the core-to-core +; communication, such as modifying the MTRR settings or writing to the APIC +; registers. +; +AmdInitEarlyWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitEarly + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_EARLY + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPremem + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPremem + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, (SIZEOF AMD_CONFIG_PARAMS + (3 * (SIZEOF EXECUTION_CACHE_REGION))) + call oemPlatformConfigInit + + ; Call in to the AmdInitEarly entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + ;; AGESA_ALERT An HyperTransportT link CRC error was observed. + ;; AGESA_WARNING One of more of the allocation rules were violated, + ;; but an adjustment was made and space was allocated. + ;; Or a HyperTransport device does not have the expected + ;; capabilities, or unusable redundant HyperTransport + ;; links were found. + ;; AGESA_ERROR One or more of the allocation rules were violated, which + ;; resulted in a requested cache region to not be allocated. + ;; Or, a HyperTransport device failed to initialize. + ;; AGESA_CRITICAL An illegal or unsupported mixture of processor types was + ;; found, or the processors installed were found to have an + ;; insufficient MP capability rating for this platform. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_EARLY_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdInitEarly + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + + popad + ret +AmdInitEarlyWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdInitPostWrapper +; +; Entry: +; On Entry to "AmdInitPost" AGESA will display AGESA_TESTPOINT - C6h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitPost" AGESA will display AGESA_TESTPOINT - C7h +; None +; +; Modified: +; None +; +; Purpose: +; The main system memory is located, initialized, and brought on-line. +; The processor(s) are prepared for full operation and control by the +; host environment. Action details differ for the BSP and AP processor +; cores. +; For the BSP, the following actions are performed: +; Full memory initialization and configuration. BSP is the master for +; this process and may delegate some tasks to APs. +; AP collection of data for use later. +; Transfer the HOBs including the artifact data out of the pre-memory +; cache storage into a temporary holding buffer in the main memory. +; Check the BIST status of the BSP +; Shut down the APs. +; Prepare for the host environment to begin main boot activity. +; Disable the pre-memory stack. +; For the APs, the following actions are performed: +; Report core identity information. +; Execute indicated memory initialization processes as directed. +; Check the BIST status of the AP +; Disable the pre-memory stack. +; Prepare to halt, giving control to host environment. +; The entire range of system memory is enabled for Write-Back cache. +; The fixed MTRRs and the variable MTRRs[7:6] are not changed in order +; to leave in place any flash ROM region currently set for Write-Protect +; execution cache. +; +; Dependencies: +; This procedure is called after the host environment has determined that +; a normal boot to operating system should be performed after any system +; warm reset is completed and after the configuration done by AmdInitEarly +; has completed. +; +; This procedure requires a stack. The host environment must use one of the +; provided service functions to establish the stack environment prior to +; making the call to this procedure. +; +; The processes performed at this time point require communication between +; processor cores. The host environment must recognize that all processor +; cores are running in parallel and avoid activities that might interfere +; with the core-to-core communication, such as modifying the MTRR settings +; or writing to the APIC registers. +; +AmdInitPostWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitPost + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_POST + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPremem + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPremem + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, SIZEOF AMD_CONFIG_PARAMS + call oemPlatformConfigInit + + ; Call in to the AmdInitPost entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + ;; AGESA_ALERT A BIST error was found on one of the cores. + ;; AGESA_WARNING HT Assist feature is running sub-optimally. + ;; AGESA_FATAL Memory initialization failed. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_POST_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdInitPost + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + + popad + ret +AmdInitPostWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdInitResumeWrapper +; +; Entry: +; On Entry to "AmdInitResume" AGESA will display AGESA_TESTPOINT - D0h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitResume" AGESA will display AGESA_TESTPOINT - D1h +; None +; +; Modified: +; None +; +; Purpose: +; This procedure initializes or re-initializes the silicon components +; for the resume boot path. For the processor, main memory is brought +; out of self-refresh mode. This procedure will use the context data +; in the NvStorage area of the input structure to re-start the main +; memory. The host environment must fill the AMD_S3_PARAMS NvStorage +; and VolatileStorage pointers and related size elements to describe +; the location of the context data. Note that for this procedure, the +; two data areas do not need to be contained in one buffer zone, they +; can be anywhere in the accessible memory address space. If the host +; environment uses a non-volatile storage device accessed on the system +; address bus such as flashROM, then the context data does not need to +; be moved prior to this call. If the host environment uses a non- +; volatile storage device not located on the system address bus (e.g. +; CMOS or SSEPROM) then the host environment must transfer the context +; data to a buffer in main memory prior to calling this procedure. +; +; Dependencies: +; The host environment must have determined that the system should take +; the resume path prior to calling this procedure. The configuration +; done by AmdInitEarly and any necessary warm reset must be complete. +; After this procedure, execution proceeds to general system restoration. +; +; This procedure requires a stack. The host environment must use one of +; the provided service functions to establish the stack environment prior +; to making the call to this procedure. +; +AmdInitResumeWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitResume + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_RESUME + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PreMemHeap + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPremem + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPremem + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) + call oemPlatformConfigInit + + call myGetNonVolatileS3Context + mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorage, ebx + mov (AMD_RESUME_PARAMS ptr [esi]).S3DataBlock.NvStorageSize, ecx + + ; Call in to the AmdInitResume entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS Re-initialization has been completed successfully. + .if (eax != AGESA_SUCCESS) + mov al, (AMD_RESUME_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + + ; Allow AGESA to free the space used by AmdInitResume + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + + popad + ret +AmdInitResumeWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdCalloutRouterPremem +; +; Entry: +; ECX - Callout function number +; EDX - Function-specific UINTN +; ESI - Pointer to function specific data +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; The call out router function for AmdInitEarly, +; AmdInitPost, and AmdInitResume. +; +; Dependencies: +; None +; +AmdCalloutRouterPremem PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES + xor ax, ax + mov ds, ax + mov es, ax + lea di, cs:CalloutRouterTablePremem + mov eax, AGESA_UNSUPPORTED + +loopThruTable: + cmp di, OFFSET cs:CalloutRouterTablePrememEnd + jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED + cmp ecx, cs:[di].sOemCallout.FuncName + je FoundMatch + add di, SIZEOF sOemCallout + jmp loopThruTable + +FoundMatch: + mov bx, cs:[di].sOemCallout.FuncPtr + call bx + +amdCpuCalloutExit: + ret +AmdCalloutRouterPremem ENDP + + +;---------------------------------------------------------------------------- +; Define the callout dispatch table for the prememory segment +;---------------------------------------------------------------------------- + +CalloutRouterTablePremem LABEL BYTE + ;; Add entries as desired. + sOemCallout <AGESA_READ_SPD, OFFSET myReadSPDPremem> + sOemCallout <AGESA_HOOKBEFORE_DRAM_INIT, OFFSET myHookBeforeDramInit> + sOemCallout <AGESA_HOOKBEFORE_DQS_TRAINING, OFFSET myHookBeforeDQSTraining> + sOemCallout <AGESA_HOOKBEFORE_EXIT_SELF_REF, OFFSET myAgesaHookBeforeExitSelfRefresh> + sOemCallout <AGESA_DO_RESET, OFFSET myDoReset> +CalloutRouterTablePrememEnd LABEL BYTE + + + +AMD_PREMEM_END + + +;---------------------------------------------------------------------------- +; POST SEGMENT +; This segment may be decompressed and run from system RAM. +;---------------------------------------------------------------------------- + +AMD_POST_START + + +;---------------------------------------------------------------------------- +; Declare the external routines required in the POST segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; myAllocateBuffer (Required) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E2h +; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT32 BufferLength; +; IN UINT32 BufferHandle; +; OUT VOID *BufferPointer; +; } AGESA_BUFFER_PARAMS; +; +; Exit: +; After this hook, AGESA will display - AGESA_TESTPOINT - E3h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The requested size of memory has been +; successfully allocated. +; AGESA_UNSUPPORTED This is a required function, so this +; value being returned causes a critical +; error response value from the AGESA +; software function. +; AGESA_ERROR Less than the requested amount of memory +; was allocated. +; +; Modified: +; EAX +; +; Purpose: +; This function is used after main memory has been initialized +; and the host environment has taken control of memory allocation. +; This function must allocate a buffer of the requested size or +; larger. This function is required to be implemented by the host +; environment. +; +; Dependencies: +; The following call-outs must work together in the host system. +; Parameters of the same name have the same function and must be +; treated the same in each function: +; AgesaAllocateBuffer +; AgesaDeallocateBuffer +; AgesaLocateBuffer +; AgesaRunFcnOnAp +; The host environment may need to reserve a location in the buffer +; to store any host environment specific value(s). The returned +; pointer must not include this reserved space. The host environment +; on the AgesaDeallocateBuffer call needs to account for the reserved +; space. This reserved space may be an identifier or the "handle" +; used to identify the specific memory block. +; +EXTERN myAllocateBuffer:NEAR + +;+--------------------------------------------------------------------------- +; +; myDeallocateBuffer (Required) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E4h +; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT32 BufferLength; +; IN UINT32 BufferHandle; +; OUT VOID *BufferPointer; +; } AGESA_BUFFER_PARAMS; +; +; Exit: +; After this hook, AGESA will display - AGESA_TESTPOINT - E5h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_BOUNDS_CHK The BufferHandle is invalid. The AGESA +; software continues with its function. +; AGESA_UNSUPPORTED This is a required function, so this +; value being returned causes a critical +; error response value from the AGESA +; software function. +; +; Modified: +; EAX +; +; Purpose: +; This function is used after main memory has been initialized +; and the host environment has taken control of memory allocation. +; This function releases a valid working buffer. This function is +; required for the host environment to implement. +; +; Dependencies: +; The following call-outs must work together in the host system. +; Parameters of the same name have the same function and must be +; treated the same in each function: +; AgesaAllocateBuffer +; AgesaDeallocateBuffer +; AgesaLocateBuffer +; AgesaRunFcnOnAp +; +EXTERN myDeallocateBuffer:NEAR + +;+--------------------------------------------------------------------------- +; +; myLocateBuffer (Required) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E6h +; ESI - Pointer to an AGESA_BUFFER_PARAMS structure. +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT32 BufferLength; +; IN UINT32 BufferHandle; +; OUT VOID *BufferPointer; +; } AGESA_BUFFER_PARAMS; +; +; Exit: +; After this hook, AGESA will display - AGESA_TESTPOINT - E7h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_BOUNDS_CHK The presented handle is invalid or the +; buffer could not be located. +; +; Modified: +; EAX +; +; Purpose: +; This function is used after main memory has been initialized +; and the host environment has taken control of memory allocation. +; This function must locate the buffer related to the indicated +; handle and return the address of the buffer and its length. +; This function is required to be implemented in the host +; environment. +; +; Dependencies: +; The following call-outs must work together in the host system. +; Parameters of the same name have the same function and must be +; treated the same in each function: +; AgesaAllocateBuffer +; AgesaDeallocateBuffer +; AgesaLocateBuffer +; AgesaRunFcnOnAp +; +EXTERN myLocateBuffer:NEAR + + +;+--------------------------------------------------------------------------- +; +; myRunFuncOnAp (Required) +; +; Entry: +; EDX - Local APIC ID of the target core. +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; The host environment must route execution to the target AP and +; have that AP call the AmdLateRunApTaskWrapper routine defined +; above. +; +; Dependencies: +; None +; +EXTERN myRunFuncOnAp:NEAR + +;+--------------------------------------------------------------------------- +; +; mySaveNonVolatileS3Context (Required for proper S3 operation) +; +; Entry: +; EBX - Pointer to the non-volatile S3 context block +; ECX - Size in bytes of the non-volatile S3 context block +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; The host environment must save the non-volatile data to an area +; that will not lose context while in the ACPI S3 sleep state, but +; cannot be placed in system RAM. This data will need to be +; available during the call to AmdInitResume. +; +; Dependencies: +; None +; +EXTERN mySaveNonVolatileS3Context:NEAR + +;+--------------------------------------------------------------------------- +; +; mySaveVolatileS3Context (Required for proper S3 operation) +; +; Entry: +; EBX - Pointer to the volatile S3 context block +; ECX - Size in bytes of the volatile S3 context block +; +; Exit: +; None +; +; Modified: +; None +; +; Purpose: +; The host environment must save the volatile data to an area +; that will not lose context while in the ACPI S3 sleep state. +; This data will need to be available during the call to +; AmdS3LateRestore. +; +; Dependencies: +; None +; +EXTERN mySaveVolatileS3Context:NEAR + +;+--------------------------------------------------------------------------- +; +; myGetVolatileS3Context (Required for proper S3 operation) +; +; Entry: +; None +; +; Exit: +; EBX - Pointer to the volatile S3 context block +; ECX - Size in bytes of the volatile S3 context block +; +; Modified: +; None +; +; Purpose: +; The host environment must return the pointer to the data +; saved during the mySaveVolatileS3Context routine. +; +; Dependencies: +; None +; +EXTERN myGetVolatileS3Context:NEAR + + +;---------------------------------------------------------------------------- +; Define the sample wrapper routines for the POST segment +;---------------------------------------------------------------------------- + +;+--------------------------------------------------------------------------- +; +; AmdInitEnvWrapper +; +; Entry: +; On Entry to "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C8h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitEnv" AGESA will display AGESA_TESTPOINT - C9h +; None +; +; Modified: +; None +; +; Purpose: +; This procedure uses the AgesaAllocateBuffer call-out to acquire +; permanent buffer space for the UEFI Hand-Off Blocks (HOBs). This +; is also known as, or includes, artifact data being used by the +; AGESA software. Upon entry to this procedure, the data is being +; held in a temporary memory location and it must be moved to a +; location controlled and protected by the host environment. +; +; These actions are performed by the BSP. The APs are not assigned +; any tasks at this time point. +; +; Dependencies: +; This procedure must be called after full memory is initialized and +; the host environment has taken control of main memory allocation. +; This procedure should be called before the PCI enumeration takes +; place and as soon as possible after the host environment memory +; allocation sub-system has started. +; +; This procedure requires a stack. The host environment must use one +; of the provided service functions to establish the stack environment +; prior to making the call to this procedure. +; +AmdInitEnvWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitEnv + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_ENV + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, SIZEOF AMD_CONFIG_PARAMS + call oemPlatformConfigInit + + ; Call in to the AmdInitEnv entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + ;; AGESA_ERROR The artifact data could not be found or the host + ;; environment failed to allocate sufficient buffer space. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_ENV_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdInitEnv + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + + popad + ret +AmdInitEnvWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdInitMidWrapper +; +; Entry: +; On Entry to "AmdInitMid" AGESA will display AGESA_TESTPOINT - CAh +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitMid" AGESA will display AGESA_TESTPOINT - CBh +; None +; +; Modified: +; None +; +; Purpose: +; This procedure call performs special configuration requirements for +; the graphics display hardware. +; +; These actions are performed by the BSP. The APs are not assigned any +; tasks at this time point. +; +; Dependencies: +; This procedure must be called after PCI enumeration has allocated +; resources, but before the video BIOS call is performed. +; +; This procedure requires a stack. The host environment must use one +; of the provided service functions to establish the stack environment +; prior to making the call to this procedure. +; +AmdInitMidWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitMid + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_MID + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, SIZEOF AMD_CONFIG_PARAMS + call oemPlatformConfigInit + + ; Call in to the AmdInitMid entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_MID_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdInitMid + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + + popad + ret + +AmdInitMidWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdInitLateWrapper +; +; Entry: +; On Entry to "AmdInitLate" AGESA will display AGESA_TESTPOINT - CCh +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdInitLate" AGESA will display AGESA_TESTPOINT - CDh +; None +; +; Modified: +; None +; +; Purpose: +; The main purpose of this function is to generate informational +; data tables used by the operating system. The individual tables +; can be selected for generation through the user selection entries +; on the input parameters. +; +; This routine uses the Call-Out AgesaAllocateBuffer to allocate a +; buffer of the proper size to contain the data. +; +; The code path separates the BSP from the APs and perform a separate +; and appropriate list of tasks for each class of core. +; For the BSP, the following actions are performed: +; Allocate buffer space for the tables. +; Generate the table contents. +; Make sure that the CPU is in a known good power state before +; proceeding to boot the OS. +; For the APs, the following actions are performed: +; Final register settings preparing for entry to OS. +; Establish the final PState for entry to OS. +; +; Dependencies: +; This routine is expected to be executed late in the boot sequence +; after main memory has been initialized, after PCI enumeration has +; completed, after the host environment ACPI sub-system has started, +; after the host environment has taken control of the APs, but just +; before the start of OS boot. +; +; The host environment must provide the required call-outs listed in +; the "Required Call-Out Procedures" section of the AGESA interface +; specification to provide the buffer space in main memory and execute +; code on the APs. The host environment must register the created ACPI +; table in the main ACPI pointer tables. This may require moving the +; generated tables to another location in memory. +; +; This procedure requires a stack. The host environment must establish +; the stack environment prior to making the call to this procedure. +; Some functions depend upon the preservation of the heap data across +; the shift from pre-memory environment to a post-memory environment. +; If that data was not preserved, then those functions cannot complete +; and an error is returned. +; +AmdInitLateWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdInitLate + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_INIT_LATE + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, SIZEOF AMD_CONFIG_PARAMS + call oemPlatformConfigInit + + ; Call in to the AmdInitLate entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS The function has completed successfully. + ;; AGESA_ALERT + ;; AGESA_ERROR The system could not allocate the needed amount of + ;; buffer space; or could not locate the artifact data block in + ;; memory. Likely cause: the host environment may not have preserved + ;; the data properly. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_LATE_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + push es + mov ax, SEG AmdAcpiSratPointer + mov es, ax + + mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSrat + mov es:AmdAcpiSratPointer, ebx + mov eax, DWORD PTR [ebx + 4] + mov es:AmdAcpiSratSize, eax + + mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiSlit + mov es:AmdAcpiSlitPointer, ebx + mov eax, DWORD PTR [ebx + 4] + mov es:AmdAcpiSlitSize, eax + + mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiPState + mov es:AmdAcpiSsdtPointer, ebx + mov eax, DWORD PTR [ebx + 4] + mov es:AmdAcpiSsdtSize, eax + + xor eax, eax + + mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce + mov es:AmdAcpiWheaMcePointer, ebx + mov ax, WORD PTR [ebx] + mov es:AmdAcpiWheaMceSize, eax + + mov ebx, (AMD_LATE_PARAMS ptr [esi]).AcpiWheaMce + mov es:AmdAcpiWheaCmcPointer, ebx + mov ax, WORD PTR [ebx] + mov es:AmdAcpiWheaCmcSize, eax + + mov eax, (AMD_LATE_PARAMS ptr [esi]).DmiTable + mov es:AmdDmiInfoPointer, eax + pop es + + + ; Allow AGESA to free the space used by AmdInitLate + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + popad + ret + +AmdInitLateWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdS3SaveWrapper +; +; Entry: +; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CEh +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Entry to "AmdS3Save" AGESA will display AGESA_TESTPOINT - CFh +; None +; +; Modified: +; None +; +; Purpose: +; This procedure saves critical registers and/or configuration +; information for preservation across a system suspend mode. All +; actions needed to prepare the processor for suspend mode is +; performed, however this procedure does NOT initiate the suspend +; process. The host environment is expected to perform that duty. +; +; These actions are performed by the BSP. The APs are not assigned +; any tasks at this time point. +; +; The initializer routine will NULL out the save area pointers and +; sizes. This procedure will determine the size of storage needed +; for all the processor context, and make a call out to the environment +; for allocation of one buffer to store all of the data. Upon exit, the +; pointers and sizes within the AMD_S3_PARAMS structure will be updated +; with the appropriate addresses within the buffer that was allocated. +; The host environment is expected to then transfer the data pointed to +; by NvStorage to a non-volatile storage area, and the data pointed to +; by VolatileStorage to either a non-volatile storage area or system +; RAM that retains its content across suspend. +; +; Dependencies: +; The host environment must initiate the suspend process. +; +; This procedure requires a stack. The host environment must establish +; the stack environment prior to making the call to this procedure. +; +AmdS3SaveWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdS3Save + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3_SAVE + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) + call oemPlatformConfigInit + + ; Call in to the AmdS3Save entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS All suspend duties have been completed successfully. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_S3SAVE_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorageSize + .if (ecx != 0) + mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.NvStorage + call mySaveNonVolatileS3Context + .endif + + mov ecx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize + .if (ecx != 0) + mov ebx, (AMD_S3SAVE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage + call mySaveVolatileS3Context + .endif + + ; Allow AGESA to free the space used by AmdS3Save + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + popad + ret + +AmdS3SaveWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdS3LateRestoreWrapper +; +; Entry: +; On Entry to "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D2h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; On Exit from "AmdS3LateRestore" AGESA will display AGESA_TESTPOINT - D3h +; None +; +; Modified: +; None +; +; Purpose: +; This procedure restores the processor state, reloads critical +; silicon component registers, and performs any re-initialization +; required by the silicon. This procedure will use the context data +; in the VolatileStorage area of the input structure to restore the +; processor registers. +; +; The host environment must fill the AMD_S3_PARAMS NvStorage and +; VolatileStorage pointers and related size elements to describe +; the location of the context data. Note that for this procedure, +; the two data areas do not need to be contained in one buffer zone, +; they can be anywhere in the accessible memory address space. If +; the host environment uses a non-volatile storage device accessed +; on the system address bus such as flashROM, then the context data +; does not need to be moved prior to this call. If the host +; environment uses a non-volatile storage device not located on the +; system address bus (e.g. CMOS or SSEPROM) then the host environment +; must transfer the context data to a buffer in main memory prior to +; calling this procedure. +; +; These actions are performed by the BSP. The APs are not assigned +; any tasks at this time point. +; +; Dependencies: +; This procedure is called late in the resume sequence, after the +; PCI control space is restored and just before resuming operating +; system execution. +; +; The host environment must initiate the OS restart process. +; +; This procedure requires a stack. The host environment must establish +; the stack environment prior to making the call to this procedure. +; +AmdS3LateRestoreWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdS3LateRestore + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_S3LATE_RESTORE + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + mov edi, esi + add edi, (SIZEOF AMD_CONFIG_PARAMS + SIZEOF AMD_S3_PARAMS) + call oemPlatformConfigInit + + call myGetVolatileS3Context + mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorage, ebx + mov (AMD_S3LATE_PARAMS ptr [esi]).S3DataBlock.VolatileStorageSize, ecx + + ; Call in to the AmdS3LateRestore entry point + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + ;; AGESA_SUCCESS All resume processes have been completed successfully. + + .if (eax != AGESA_SUCCESS) + mov al, (AMD_S3LATE_PARAMS ptr [esi]).StdHeader.HeapStatus + mov ebx, AGESA_B2_ADDRESS + call AmdProcessAgesaErrors + .endif + + ; Allow AGESA to free the space used by AmdS3LateRestore + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + popad + ret +AmdS3LateRestoreWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdLateRunApTaskWrapper +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - D4h +; DS - 0000 with 4 gigabyte access +; ES - 0000 with 4 gigabyte access +; +; Exit: +; After this hook, AGESA will display - AGESA_TESTPOINT - D5h +; None +; +; Modified: +; None +; +; Purpose: +; This entry point is tightly connected with the "AgesaRunFcnOnAp" +; call out. The AGESA software will call the call-out "AgesaRunFcnOnAp"; +; the host environment will then call this entry point to have the AP +; execute the requested function. This is needed late in the Post and +; Resume branches for running an AP task since the AGESA software has +; relinquished control of the APs to the host environment. +; +; Dependencies: +; The host environment must implement the"AgesaRunFcnOnAp" call-out +; and route execution to the target AP. +; +AmdLateRunApTaskWrapper PROC NEAR PUBLIC + local localCfgBlock:AMD_INTERFACE_PARAMS + + pushad + + ; Prepare for the call to create and initialize the input parameters for AmdLateRunApTask + xor eax, eax + mov ax, ss + shl eax, 4 + lea esi, localCfgBlock + add esi, eax + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.ImageBasePtr, AGESA_B2_ADDRESS + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_CREATE_STRUCT + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.AltImageBasePtr, 0 + mov edx, SEG AmdCallout16 + shl edx, 4 + add edx, OFFSET AmdCallout16 + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.CalloutPtr, edx + + mov (AMD_INTERFACE_PARAMS ptr [esi]).AgesaFunctionName, AMD_LATE_RUN_AP_TASK + mov (AMD_INTERFACE_PARAMS ptr [esi]).AllocationMethod, PostMemDram + mov (AMD_INTERFACE_PARAMS ptr [esi]).NewStructSize, 0 + push esi + mov dx, SEG AmdCalloutRouterPost + shl edx, 16 + mov dx, OFFSET AmdCalloutRouterPost + push edx + call AmdBridge32 + pop edx + + mov esi, (AMD_INTERFACE_PARAMS ptr [esi]).NewStructPtr + + ; The structure has been initialized. Now modify the default settings as desired. + + push es + mov ax, SEG AmdRunCodeOnApDataPointer + mov es, ax + mov eax, es:AmdRunCodeOnApDataPointer + mov (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock, eax + mov eax, es:AmdRunCodeOnApDataSize + mov (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength, eax + mov eax, es:AmdRunCodeOnApFunction + mov (AP_EXE_PARAMS PTR [esi]).FunctionNumber, eax + pop es + + ; Call in to the AmdLateRunApTask dispatcher + push edx + call AmdBridge32 + pop edx + + ;; EAX = AGESA_STATUS + push es + mov bx, SEG AmdRunCodeOnApStatus + mov es, bx + mov es:AmdRunCodeOnApStatus, eax + pop es + + ; Allow AGESA to free the space used by AmdLateRunApTask + pop esi + mov (AMD_INTERFACE_PARAMS ptr [esi]).StdHeader.Func, AMD_RELEASE_STRUCT + call AmdBridge32 + + popad + ret + +AmdLateRunApTaskWrapper ENDP + + +;+--------------------------------------------------------------------------- +; +; AmdRunFuncOnAp (Required) +; +; Entry: +; Prior to this hook, AGESA will display - AGESA_TESTPOINT - E8h +; EDX - Local APIC ID of the target core. +; ESI - Pointer to an AP_EXE_PARAMS structure. +; +; typedef struct { +; IN OUT AMD_CONFIG_PARAMS StdHeader; +; IN UINT32 FunctionNumber; +; IN VOID *RelatedDataBlock; +; IN UINT32 RelatedDataBlockLength; +; } AP_EXE_PARAMS; +; +; Exit: +; After this hook, AGESA will display - AGESA_TESTPOINT - E9h +; EAX - Contains the AGESA_STATUS return code. +; AGESA_SUCCESS The function has completed successfully. +; AGESA_UNSUPPORTED This is a required function, so this value +; being returned causes a critical error +; response value from the AGESAT software +; function and no memory initialized. +; AGESA_WARNING The AP did not respond. +; +; Modified: +; EAX +; +; Purpose: +; This function is used after main memory has been initialized +; and the host environment has taken control of AP task dispatching. +; This function must cause the indicated function code to be executed +; upon the specified Application Processor. This procedure must be +; executed in 32-bit mode. This function is required to be implemented +; in the host environment. +; +; Dependencies: +; The host environment must route execution to the target AP and +; have that AP call the"AmdLateRunApTask" entry point. +; +AmdRunFuncOnAp PROC NEAR PUBLIC + + push es + mov ax, SEG AmdRunCodeOnApDataPointer + mov es, ax + mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedDataBlock + mov es:AmdRunCodeOnApDataPointer, eax + mov eax, (AP_EXE_PARAMS PTR [esi]).RelatedBlockLength + mov es:AmdRunCodeOnApDataSize, eax + mov eax, (AP_EXE_PARAMS PTR [esi]).FunctionNumber + mov es:AmdRunCodeOnApFunction, eax + mov eax, AGESA_UNSUPPORTED + mov es:AmdRunCodeOnApStatus, eax + pop es + + call myRunFuncOnAp + + push es + mov ax, SEG AmdRunCodeOnApStatus + mov es, ax + mov eax, es:AmdRunCodeOnApStatus + pop es + ret +AmdRunFuncOnAp ENDP + + + +;+--------------------------------------------------------------------------- +; +; AmdCalloutRouterPost +; +; Entry: +; ECX - Callout function number +; EDX - Function-specific UINTN +; ESI - Pointer to function specific data +; +; Exit: +; EAX - Contains the AGESA_STATUS return code. +; +; Modified: +; None +; +; Purpose: +; The call out router function for AmdInitEnv, +; AmdInitMid, AmdInitLate, AmdS3Save, and +; AmdS3LateRestore. +; +; Dependencies: +; None +; +AmdCalloutRouterPost PROC FAR PUBLIC USES ECX EBX ESI BX DI DS ES + xor ax, ax + mov ds, ax + mov es, ax + lea di, cs:CalloutRouterTablePost + mov eax, AGESA_UNSUPPORTED + +loopThruTable: + cmp di, OFFSET cs:CalloutRouterTablePostEnd + jae amdCpuCalloutExit ; exit with AGESA_UNSUPPORTED + cmp ecx, cs:[di].sOemCallout.FuncName + je FoundMatch + add di, SIZEOF sOemCallout + jmp loopThruTable + +FoundMatch: + mov bx, cs:[di].sOemCallout.FuncPtr + call bx + +amdCpuCalloutExit: + ret +AmdCalloutRouterPost ENDP + + +;---------------------------------------------------------------------------- +; Define the callout dispatch table for the POST segment +;---------------------------------------------------------------------------- + +CalloutRouterTablePost LABEL BYTE + ;; Add entries as desired. + sOemCallout <AGESA_ALLOCATE_BUFFER, OFFSET myAllocateBuffer> + sOemCallout <AGESA_DEALLOCATE_BUFFER, OFFSET myDeallocateBuffer> + sOemCallout <AGESA_LOCATE_BUFFER, OFFSET myLocateBuffer> + sOemCallout <AGESA_RUNFUNC_ONAP, OFFSET AmdRunFuncOnAp> +CalloutRouterTablePostEnd LABEL BYTE + +AMD_POST_END + + +;---------------------------------------------------------------------------- +; CPU DATA SEGMENT +; This segment must be writable, and present at the time that +; AmdInitLate is run. +;---------------------------------------------------------------------------- + +CPU_DATASEG_START + + ;; Data used to store pointers for later use by the host environment. + PUBLIC AmdAcpiSratPointer + PUBLIC AmdAcpiSratSize + PUBLIC AmdAcpiSlitPointer + PUBLIC AmdAcpiSlitSize + PUBLIC AmdAcpiSsdtPointer + PUBLIC AmdAcpiSsdtSize + PUBLIC AmdAcpiWheaMcePointer + PUBLIC AmdAcpiWheaMceSize + PUBLIC AmdAcpiWheaCmcPointer + PUBLIC AmdAcpiWheaCmcSize + PUBLIC AmdDmiInfoPointer + AmdAcpiSratPointer DWORD ? + AmdAcpiSratSize DWORD ? + AmdAcpiSlitPointer DWORD ? + AmdAcpiSlitSize DWORD ? + AmdAcpiSsdtPointer DWORD ? + AmdAcpiSsdtSize DWORD ? + AmdAcpiWheaMcePointer DWORD ? + AmdAcpiWheaMceSize DWORD ? + AmdAcpiWheaCmcPointer DWORD ? + AmdAcpiWheaCmcSize DWORD ? + AmdDmiInfoPointer DWORD ? + + ;; Data used for communication between the AP and the BSP. + PUBLIC AmdRunCodeOnApDataPointer + PUBLIC AmdRunCodeOnApDataSize + PUBLIC AmdRunCodeOnApFunction + PUBLIC AmdRunCodeOnApStatus + AmdRunCodeOnApDataPointer DWORD ? + AmdRunCodeOnApDataSize DWORD ? + AmdRunCodeOnApFunction DWORD ? + AmdRunCodeOnApStatus DWORD ? + +CPU_DATASEG_END + + +END diff --git a/src/vendorcode/amd/agesa/Legacy/Proc/hobTransfer.c b/src/vendorcode/amd/agesa/Legacy/Proc/hobTransfer.c new file mode 100644 index 0000000000..d205b5488c --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/Proc/hobTransfer.c @@ -0,0 +1,394 @@ +/* $NoKeywords:$ */ +/** + * @file + * + * AMD Hob Transfer functions. + * + * Contains code that copy Heap to temp memory or main memory. + * + * @xrefitem bom "File Content Label" "Release Content" + * @e project: AGESA + * @e sub-project: CPU + * @e \$Revision: 35136 $ @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $ + * + */ +/* + ***************************************************************************** + * + * Copyright (c) 2011, Advanced Micro Devices, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Advanced Micro Devices, Inc. nor the names of + * its contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * *************************************************************************** + * + */ + +/*---------------------------------------------------------------------------------------- + * M O D U L E S U S E D + *---------------------------------------------------------------------------------------- + */ + +#include "AGESA.h" +#include "amdlib.h" +#include "Ids.h" +#include "cpuRegisters.h" +#include "GeneralServices.h" +#include "cpuServices.h" +#include "cpuCacheInit.h" +#include "cpuFamilyTranslation.h" +#include "heapManager.h" +#include "cpuLateInit.h" +#include "Filecode.h" +CODE_GROUP (G1_PEICC) +RDATA_GROUP (G1_PEICC) + +#define FILECODE LEGACY_PROC_HOBTRANSFER_FILECODE +/*---------------------------------------------------------------------------------------- + * D E F I N I T I O N S A N D M A C R O S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * T Y P E D E F S A N D S T R U C T U R E S + *---------------------------------------------------------------------------------------- + */ + + +/*---------------------------------------------------------------------------------------- + * P R O T O T Y P E S O F L O C A L F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * P U B L I C F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ + +/*---------------------------------------------------------------------------------------- + * E X P O R T E D F U N C T I O N S + *---------------------------------------------------------------------------------------- + */ +extern BUILD_OPT_CFG UserOptions; + +/* -----------------------------------------------------------------------------*/ +/** + * + * CopyHeapToTempRamAtPost + * + * This function copies BSP heap content to RAM + * + * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct. + * + * @retval AGESA_STATUS + * + */ +AGESA_STATUS +CopyHeapToTempRamAtPost ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 *BaseAddressInCache; + UINT8 *BaseAddressInTempMem; + UINT8 *Source; + UINT8 *Destination; + UINT8 AlignTo16ByteInCache; + UINT8 AlignTo16ByteInTempMem; + UINT8 Ignored; + UINT32 SizeOfNodeData; + UINT32 TotalSize; + UINT32 HeapRamFixMtrr; + UINT32 HeapRamVariableMtrr; + UINT32 HeapInCacheOffset; + UINT64 MsrData; + UINT64 VariableMtrrBase; + UINT64 VariableMtrrMask; + UINTN AmdHeapRamAddress; + AGESA_STATUS IgnoredStatus; + BUFFER_NODE *HeapInCache; + BUFFER_NODE *HeapInTempMem; + HEAP_MANAGER *HeapManagerInCache; + HEAP_MANAGER *HeapManagerInTempMem; + CACHE_INFO *CacheInfoPtr; + CPU_SPECIFIC_SERVICES *FamilySpecificServices; + + AmdHeapRamAddress = (UINTN) UserOptions.CfgHeapDramAddress; + // + //If the user define address above 1M, Mem Init has already set + //whole available memory as WB cacheable. + // + if (AmdHeapRamAddress < 0x100000) { + // Region below 1MB + // Fixed MTTR region + // turn on modification bit + LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader); + MsrData |= 0x80000; + LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader); + + if (AmdHeapRamAddress >= 0xC0000) { + // + // 0xC0000 ~ 0xFFFFF + // + HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX4k_C0000 + (((AmdHeapRamAddress >> 16) & 0x3) * 2)); + MsrData = AMD_MTRR_FIX4K_UC_DRAM; + LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader); + LibAmdMsrWrite ((HeapRamFixMtrr + 1), &MsrData, StdHeader); + } else if (AmdHeapRamAddress >= 0x80000) { + // + // 0x80000~0xBFFFF + // + HeapRamFixMtrr = (UINT32) (AMD_MTRR_FIX16k_80000 + ((AmdHeapRamAddress >> 17) & 0x1)); + MsrData = AMD_MTRR_FIX16K_UC_DRAM; + LibAmdMsrWrite (HeapRamFixMtrr, &MsrData, StdHeader); + } else { + // + // 0x0 ~ 0x7FFFF + // + LibAmdMsrRead (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader); + MsrData = MsrData & (~(0xFF << (8 * ((AmdHeapRamAddress >> 16) & 0x7)))); + MsrData = MsrData | (AMD_MTRR_FIX64K_UC_DRAM << (8 * ((AmdHeapRamAddress >> 16) & 0x7))); + LibAmdMsrWrite (AMD_MTRR_FIX64k_00000, &MsrData, StdHeader); + } + + // Turn on MTTR enable bit and turn off modification bit + LibAmdMsrRead (MSR_SYS_CFG, &MsrData, StdHeader); + MsrData |= 0x40000; + MsrData &= 0xFFFFFFFFFFF7FFFF; + LibAmdMsrWrite (MSR_SYS_CFG, &MsrData, StdHeader); + } else { + // Region above 1MB + // Variable MTTR region + // Get family specific cache Info + GetCpuServicesOfCurrentCore (&FamilySpecificServices, StdHeader); + FamilySpecificServices->GetCacheInfo (FamilySpecificServices, &CacheInfoPtr, &Ignored, StdHeader); + + // Find an empty MTRRphysBase/MTRRphysMask + for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE; + HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0; + HeapRamVariableMtrr--) { + LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader); + LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader); + if ((VariableMtrrBase == 0) && (VariableMtrrMask == 0)) { + break; + } + } + if (HeapRamVariableMtrr < AMD_MTRR_VARIABLE_BASE0) { + // All variable MTRR is used. + ASSERT (FALSE); + } + + // Set variable MTRR base and mask + // If the address ranges of two or more MTRRs overlap + // and if at least one of the memory types is UC, the UC memory type is used. + VariableMtrrBase = (UINT64) (AmdHeapRamAddress & CacheInfoPtr->HeapBaseMask); + VariableMtrrMask = CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK; + LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader); + LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader); + } + // Copying Heap content + if (IsBsp (StdHeader, &IgnoredStatus)) { + TotalSize = sizeof (HEAP_MANAGER); + SizeOfNodeData = 0; + AlignTo16ByteInTempMem = 0; + BaseAddressInCache = (UINT8 *) StdHeader->HeapBasePtr; + HeapManagerInCache = (HEAP_MANAGER *) BaseAddressInCache; + HeapInCacheOffset = HeapManagerInCache->FirstActiveBufferOffset; + HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset); + + BaseAddressInTempMem = (UINT8 *) UserOptions.CfgHeapDramAddress; + HeapManagerInTempMem = (HEAP_MANAGER *) BaseAddressInTempMem; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize); + + // copy heap from cache to temp memory. + // only heap with persist great than HEAP_LOCAL_CACHE will be copied. + // Note: Only copy heap with persist greater than HEAP_LOCAL_CACHE. + while (HeapInCacheOffset != AMD_HEAP_INVALID_HEAP_OFFSET) { + if (HeapInCache->Persist > HEAP_LOCAL_CACHE) { + AlignTo16ByteInCache = HeapInCache->PadSize; + AlignTo16ByteInTempMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInTempMem + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF); + SizeOfNodeData = HeapInCache->BufferSize - AlignTo16ByteInCache; + TotalSize = (UINT32) (TotalSize + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInTempMem); + Source = (UINT8 *) HeapInCache + sizeof (BUFFER_NODE) + AlignTo16ByteInCache; + Destination = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem; + LibAmdMemCopy (HeapInTempMem, HeapInCache, sizeof (BUFFER_NODE), StdHeader); + LibAmdMemCopy (Destination, Source, SizeOfNodeData, StdHeader); + HeapInTempMem->OffsetOfNextNode = TotalSize; + HeapInTempMem->BufferSize = SizeOfNodeData + AlignTo16ByteInTempMem; + HeapInTempMem->PadSize = AlignTo16ByteInTempMem; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize); + } + HeapInCacheOffset = HeapInCache->OffsetOfNextNode; + HeapInCache = (BUFFER_NODE *) (BaseAddressInCache + HeapInCacheOffset); + } + // initialize heap manager + if (TotalSize == sizeof (HEAP_MANAGER)) { + // heap is empty + HeapManagerInTempMem->UsedSize = sizeof (HEAP_MANAGER); + HeapManagerInTempMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET; + HeapManagerInTempMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER); + } else { + // heap is NOT empty + HeapManagerInTempMem->UsedSize = TotalSize; + HeapManagerInTempMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER); + HeapManagerInTempMem->FirstFreeSpaceOffset = TotalSize; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize - SizeOfNodeData - AlignTo16ByteInTempMem - sizeof (BUFFER_NODE)); + HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + TotalSize); + } + // heap signature + HeapManagerInCache->Signature = 0x00000000; + HeapManagerInTempMem->Signature = HEAP_SIGNATURE_VALID; + // Free space node + HeapInTempMem->BufferSize = (UINT32) (AMD_HEAP_SIZE_PER_CORE - TotalSize); + HeapInTempMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET; + } + return AGESA_SUCCESS; +} + + +/* -----------------------------------------------------------------------------*/ +/** + * + * CopyHeapToMainRamAtPost + * + * This function copies Temp Ram heap content to Main Ram + * + * @param[in,out] StdHeader - Pointer to AMD_CONFIG_PARAMS struct. + * + * @retval AGESA_STATUS + * + */ +AGESA_STATUS +CopyHeapToMainRamAtPost ( + IN OUT AMD_CONFIG_PARAMS *StdHeader + ) +{ + UINT8 *BaseAddressInTempMem; + UINT8 *BaseAddressInMainMem; + UINT8 *Source; + UINT8 *Destination; + UINT8 AlignTo16ByteInTempMem; + UINT8 AlignTo16ByteInMainMem; + UINT8 Ignored; + UINT32 SizeOfNodeData; + UINT32 TotalSize; + UINT32 HeapInTempMemOffset; + UINT32 HeapRamVariableMtrr; + UINT64 VariableMtrrBase; + UINT64 VariableMtrrMask; + AGESA_STATUS IgnoredStatus; + BUFFER_NODE *HeapInTempMem; + BUFFER_NODE *HeapInMainMem; + HEAP_MANAGER *HeapManagerInTempMem; + HEAP_MANAGER *HeapManagerInMainMem; + AGESA_BUFFER_PARAMS AgesaBuffer; + CACHE_INFO *CacheInfoPtr; + CPU_SPECIFIC_SERVICES *FamilySpecificServices; + + if (IsBsp (StdHeader, &IgnoredStatus)) { + TotalSize = sizeof (HEAP_MANAGER); + SizeOfNodeData = 0; + AlignTo16ByteInMainMem = 0; + BaseAddressInTempMem = (UINT8 *) StdHeader->HeapBasePtr; + HeapManagerInTempMem = (HEAP_MANAGER *) StdHeader->HeapBasePtr; + HeapInTempMemOffset = HeapManagerInTempMem->FirstActiveBufferOffset; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset); + + AgesaBuffer.StdHeader = *StdHeader; + AgesaBuffer.BufferHandle = AMD_HEAP_IN_MAIN_MEMORY_HANDLE; + AgesaBuffer.BufferLength = AMD_HEAP_SIZE_PER_CORE; + if (AgesaAllocateBuffer (0, &AgesaBuffer) != AGESA_SUCCESS) { + return AGESA_ERROR; + } + BaseAddressInMainMem = (UINT8 *) AgesaBuffer.BufferPointer; + HeapManagerInMainMem = (HEAP_MANAGER *) BaseAddressInMainMem; + HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize); + LibAmdMemFill (BaseAddressInMainMem, 0x00, AMD_HEAP_SIZE_PER_CORE, StdHeader); + // copy heap from temp memory to main memory. + // only heap with persist great than HEAP_TEMP_MEM will be copied. + // Note: Only copy heap buffers with persist greater than HEAP_TEMP_MEM. + while (HeapInTempMemOffset != AMD_HEAP_INVALID_HEAP_OFFSET) { + if (HeapInTempMem->Persist > HEAP_TEMP_MEM) { + AlignTo16ByteInTempMem = HeapInTempMem->PadSize; + AlignTo16ByteInMainMem = (UINT8) ((0x10 - (((UINTN) (VOID *) HeapInMainMem + sizeof (BUFFER_NODE) + SIZE_OF_SENTINEL) & 0xF)) & 0xF); + SizeOfNodeData = HeapInTempMem->BufferSize - AlignTo16ByteInTempMem; + TotalSize = (UINT32) (TotalSize + sizeof (BUFFER_NODE) + SizeOfNodeData + AlignTo16ByteInMainMem); + Source = (UINT8 *) HeapInTempMem + sizeof (BUFFER_NODE) + AlignTo16ByteInTempMem; + Destination = (UINT8 *) HeapInMainMem + sizeof (BUFFER_NODE) + AlignTo16ByteInMainMem; + LibAmdMemCopy (HeapInMainMem, HeapInTempMem, sizeof (BUFFER_NODE), StdHeader); + LibAmdMemCopy (Destination, Source, SizeOfNodeData, StdHeader); + HeapInMainMem->OffsetOfNextNode = TotalSize; + HeapInMainMem->BufferSize = SizeOfNodeData + AlignTo16ByteInMainMem; + HeapInMainMem->PadSize = AlignTo16ByteInMainMem; + HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize); + } + HeapInTempMemOffset = HeapInTempMem->OffsetOfNextNode; + HeapInTempMem = (BUFFER_NODE *) (BaseAddressInTempMem + HeapInTempMemOffset); + } + // initialize heap manager + if (TotalSize == sizeof (HEAP_MANAGER)) { + // heap is empty + HeapManagerInMainMem->UsedSize = sizeof (HEAP_MANAGER); + HeapManagerInMainMem->FirstActiveBufferOffset = AMD_HEAP_INVALID_HEAP_OFFSET; + HeapManagerInMainMem->FirstFreeSpaceOffset = sizeof (HEAP_MANAGER); + } else { + // heap is NOT empty + HeapManagerInMainMem->UsedSize = TotalSize; + HeapManagerInMainMem->FirstActiveBufferOffset = sizeof (HEAP_MANAGER); + HeapManagerInMainMem->FirstFreeSpaceOffset = TotalSize; + HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize - SizeOfNodeData - AlignTo16ByteInMainMem - sizeof (BUFFER_NODE)); + HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET; + HeapInMainMem = (BUFFER_NODE *) (BaseAddressInMainMem + TotalSize); + } + // heap signature + HeapManagerInTempMem->Signature = 0x00000000; + HeapManagerInMainMem->Signature = HEAP_SIGNATURE_VALID; + // Free space node + HeapInMainMem->BufferSize = AMD_HEAP_SIZE_PER_CORE - TotalSize; + HeapInMainMem->OffsetOfNextNode = AMD_HEAP_INVALID_HEAP_OFFSET; + } + // if address of heap in temp memory is above 1M, then we must used one variable MTRR. + if (StdHeader->HeapBasePtr >= 0x100000) { + // Find out which variable MTRR was used in CopyHeapToTempRamAtPost. + GetCpuServicesOfCurrentCore (&FamilySpecificServices, StdHeader); + FamilySpecificServices->GetCacheInfo (FamilySpecificServices, &CacheInfoPtr, &Ignored, StdHeader); + for (HeapRamVariableMtrr = AMD_MTRR_VARIABLE_HEAP_BASE; + HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0; + HeapRamVariableMtrr--) { + LibAmdMsrRead (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader); + LibAmdMsrRead ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader); + if ((VariableMtrrBase == (UINT64) (StdHeader->HeapBasePtr & CacheInfoPtr->HeapBaseMask)) && + (VariableMtrrMask == (UINT64) (CacheInfoPtr->VariableMtrrHeapMask & AMD_HEAP_MTRR_MASK))) { + break; + } + } + if (HeapRamVariableMtrr >= AMD_MTRR_VARIABLE_BASE0) { + // Clear variable MTRR which set in CopyHeapToTempRamAtPost. + VariableMtrrBase = 0; + VariableMtrrMask = 0; + LibAmdMsrWrite (HeapRamVariableMtrr, &VariableMtrrBase, StdHeader); + LibAmdMsrWrite ((HeapRamVariableMtrr + 1), &VariableMtrrMask, StdHeader); + } + } + return AGESA_SUCCESS; +} diff --git a/src/vendorcode/amd/agesa/Legacy/agesa.inc b/src/vendorcode/amd/agesa/Legacy/agesa.inc new file mode 100644 index 0000000000..65dd0ef7fa --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/agesa.inc @@ -0,0 +1,2547 @@ +; **************************************************************************** +; * +; * @file +; * +; * Agesa structures and definitions +; * +; * Contains AMD AGESA core interface +; * +; * @xrefitem bom "File Content Label" "Release Content" +; * @e project: AGESA +; * @e sub-project: Include +; * @e \$Revision: 41505 $ @e \$Date: 2010-11-05 22:06:20 +0800 (Fri, 05 Nov 2010) $ +; +;***************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;***************************************************************************** + +INCLUDE amd.inc +UINT64 TEXTEQU <QWORD> +UINT32 TEXTEQU <DWORD> +UINT16 TEXTEQU <WORD> +UINT8 TEXTEQU <BYTE> +CHAR8 TEXTEQU <BYTE> +BOOLEAN TEXTEQU <BYTE> +POINTER TEXTEQU <DWORD> + + ; AGESA Types and Definitions + + + + ; AGESA BASIC CALLOUTS + AGESA_MEM_RELEASE EQU 00028000h + + ; AGESA ADVANCED CALLOUTS, Processor + AGESA_CHECK_UMA EQU 00028100h + AGESA_DO_RESET EQU 00028101h + AGESA_ALLOCATE_BUFFER EQU 00028102h + AGESA_DEALLOCATE_BUFFER EQU 00028103h + AGESA_LOCATE_BUFFER EQU 00028104h + AGESA_RUNFUNC_ONAP EQU 00028105h + + ; AGESA ADVANCED CALLOUTS, HyperTransport + + ; AGESA ADVANCED CALLOUTS, Memory + AGESA_READ_SPD EQU 00028140h + AGESA_HOOKBEFORE_DRAM_INIT EQU 00028141h + AGESA_HOOKBEFORE_DQS_TRAINING EQU 00028142h + AGESA_READ_SPD_RECOVERY EQU 00028143h + AGESA_HOOKBEFORE_EXIT_SELF_REF EQU 00028144h + AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY EQU 00028145h + + ; AGESA IDS CALLOUTS + AGESA_GET_IDS_INIT_DATA EQU 00028200h + + ; AGESA GNB CALLOUTS + AGESA_GNB_PCIE_SLOT_RESET EQU 00028301h +; ------------------------------------------------------------------------ + + ; HyperTransport Interface + + + +; ----------------------------------------------------------------------------- + ; HT DEFINITIONS AND MACROS + +; ----------------------------------------------------------------------------- + + + ; Width equates for call backs + HT_WIDTH_8_BITS EQU 8 + HT_WIDTH_16_BITS EQU 16 + HT_WIDTH_4_BITS EQU 4 + HT_WIDTH_2_BITS EQU 2 + HT_WIDTH_NO_LIMIT EQU HT_WIDTH_16_BITS + + ; Frequency Limit equates for call backs which take a frequency supported mask. + HT_FREQUENCY_LIMIT_200M EQU 1 + HT_FREQUENCY_LIMIT_400M EQU 7 + HT_FREQUENCY_LIMIT_600M EQU 1Fh + HT_FREQUENCY_LIMIT_800M EQU 3Fh + HT_FREQUENCY_LIMIT_1000M EQU 7Fh + HT_FREQUENCY_LIMIT_HT1_ONLY EQU 7Fh + HT_FREQUENCY_LIMIT_1200M EQU 0FFh + HT_FREQUENCY_LIMIT_1400M EQU 1FFh + HT_FREQUENCY_LIMIT_1600M EQU 3FFh + HT_FREQUENCY_LIMIT_1800M EQU 7FFh + HT_FREQUENCY_LIMIT_2000M EQU 0FFFh + HT_FREQUENCY_LIMIT_2200M EQU 1FFFh + HT_FREQUENCY_LIMIT_2400M EQU 3FFFh + HT_FREQUENCY_LIMIT_2600M EQU 7FFFh + HT_FREQUENCY_LIMIT_2800M EQU 27FFFh + HT_FREQUENCY_LIMIT_3000M EQU 67FFFh + HT_FREQUENCY_LIMIT_3200M EQU 0E7FFFh + HT_FREQUENCY_LIMIT_3600M EQU 1E7FFFh + HT_FREQUENCY_LIMIT_MAX EQU HT_FREQUENCY_LIMIT_3600M + HT_FREQUENCY_NO_LIMIT EQU 0FFFFFFFFh + + ; Unit ID Clumping special values + HT_CLUMPING_DISABLE EQU 00000000h + HT_CLUMPING_NO_LIMIT EQU 0FFFFFFFFh + + HT_LIST_TERMINAL EQU 0FFh + HT_LIST_MATCH_ANY EQU 0FEh + HT_LIST_MATCH_INTERNAL_LINK EQU 0FDh + + ; Event Notify definitions + + ; Event definitions. + + ; Coherent subfunction events + HT_EVENT_COH_EVENTS EQU 10001000h + HT_EVENT_COH_NO_TOPOLOGY EQU 10011000h + HT_EVENT_COH_OBSOLETE000 EQU 10021000h + HT_EVENT_COH_PROCESSOR_TYPE_MIX EQU 10031000h + HT_EVENT_COH_NODE_DISCOVERED EQU 10041000h + HT_EVENT_COH_MPCAP_MISMATCH EQU 10051000h + + ; Non-coherent subfunction events + HT_EVENT_NCOH_EVENTS EQU 10002000h + HT_EVENT_NCOH_BUID_EXCEED EQU 10012000h + HT_EVENT_NCOH_OBSOLETE000 EQU 10022000h + HT_EVENT_NCOH_BUS_MAX_EXCEED EQU 10032000h + HT_EVENT_NCOH_CFG_MAP_EXCEED EQU 10042000h + HT_EVENT_NCOH_DEVICE_FAILED EQU 10052000h + HT_EVENT_NCOH_AUTO_DEPTH EQU 10062000h + + ; Optimization subfunction events + HT_EVENT_OPT_EVENTS EQU 10003000h + HT_EVENT_OPT_REQUIRED_CAP_RETRY EQU 10013000h + HT_EVENT_OPT_REQUIRED_CAP_GEN3 EQU 10023000h + HT_EVENT_OPT_UNUSED_LINKS EQU 10033000h + HT_EVENT_OPT_LINK_PAIR_EXCEED EQU 10043000h + + ; HW Fault events + HT_EVENT_HW_EVENTS EQU 10004000h + HT_EVENT_HW_SYNCFLOOD EQU 10014000h + HT_EVENT_HW_HTCRC EQU 10024000h + + ; The Recovery HT component uses 0x10005000 for events. + ; For consistency, we avoid that range here. + + HT_MAX_NC_BUIDS EQU 32 +; ---------------------------------------------------------------------------- + ; HT TYPEDEFS, STRUCTURES, ENUMS + +; ---------------------------------------------------------------------------- +MATCHED EQU 0 ; < The link matches the requested customization. +POWERED_OFF EQU 1 ; < Power the link off. +UNMATCHED EQU 2 ; < The link should be processed according to normal defaults. +MaxFinalLinkState EQU 3 ; < Not a final link state, use for limit checking. +FINAL_LINK_STATE TEXTEQU <DWORD> + + ; Swap a device from its current id to a new one. + +BUID_SWAP_ITEM STRUCT + FromId UINT8 ? ; < The device responding to FromId, + ToId UINT8 ? ; < will be moved to ToId. +BUID_SWAP_ITEM ENDS + + + ; Each Non-coherent chain may have a list of device swaps. After performing the swaps, + ; the final in order list of device ids is provided. (There can be more swaps than devices.) + ; The unused entries in both are filled with 0xFF. + +BUID_SWAP_LIST STRUCT + Swaps BUID_SWAP_ITEM (HT_MAX_NC_BUIDS) DUP ({}) ; < The BUID Swaps to perform + FinalIds UINT8 (HT_MAX_NC_BUIDS) DUP (?) ; < The ordered final BUIDs, resulting from the swaps +BUID_SWAP_LIST ENDS + + + ; Control Manual Initialization of Non-Coherent Chains + + ; This interface is checked every time a non-coherent chain is + ; processed. BUID assignment may be controlled explicitly on a + ; non-coherent chain. Provide a swap list. Swaps controls the + ; BUID assignment and FinalIds provides the device to device + ; Linking. Device orientation can be detected automatically, or + ; explicitly. See interface documentation for more details. + + ; If a manual swap list is not supplied, + ; automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially + ; based on each device's unit count. + +MANUAL_BUID_SWAP_LIST STRUCT + ; Match fields + Socket UINT8 ? ; < The Socket on which this chain is located + Link UINT8 ? ; < The Link on the host for this chain + ; Override fields + SwapList BUID_SWAP_LIST {} ; < The swap list +MANUAL_BUID_SWAP_LIST ENDS + + + ; Override options for DEVICE_CAP_OVERRIDE. + + ; Specify which override actions should be performed. For Checks, 1 means to check the item + ; and 0 means to skip the check. For the override options, 1 means to apply the override and + ; 0 means to ignore the override. + +DEVICE_CAP_OVERRIDE_OPTIONS STRUCT + IsCheckDevVenId UINT32 ? +; IN UINT32 IsCheckDevVenId:1; ; < Check Match on Device/Vendor id +; IN UINT32 IsCheckRevision:1; ; < Check Match on device Revision +; IN UINT32 IsOverrideWidthIn:1; ; < Override Width In +; IN UINT32 IsOverrideWidthOut:1; ; < Override Width Out +; IN UINT32 IsOverrideFreq:1; ; < Override Frequency +; IN UINT32 IsOverrideClumping:1; ; < Override Clumping +; IN UINT32 IsDoCallout:1; ; < Make the optional callout +DEVICE_CAP_OVERRIDE_OPTIONS ENDS + + ; Override capabilities of a device. + + ; This interface is checked once for every Link on every IO device. + ; Provide the width and frequency capability if needed for this device. + ; This is used along with device capabilities, the limit interfaces, and northbridge + ; limits to compute the default settings. The components of the device's PCI config + ; address are provided, so its settings can be consulted if need be. + ; The optional callout is a catch all. + +DEVICE_CAP_OVERRIDE STRUCT + ; Match fields + HostSocket UINT8 ? ; < The Socket on which this chain is located. + HostLink UINT8 ? ; < The Link on the host for this chain. + Depth UINT8 ? ; < The Depth in the I/O chain from the Host. + DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). + Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). + Link UINT8 ? ; < The Device's Link number (0 or 1). + Options DEVICE_CAP_OVERRIDE_OPTIONS {} ; < The options for this device override. + ; Override fields + LinkWidthIn UINT8 ? ; < modify to change the Link Width In. + LinkWidthOut UINT8 ? ; < modify to change the Link Width Out. + FreqCap UINT32 ? ; < modify to change the Link's frequency capability. + Clumping UINT32 ? ; < modify to change Unit ID clumping support. + Callout CALLOUT_ENTRY ? ; < optional call for really complex cases, or NULL. +DEVICE_CAP_OVERRIDE ENDS + + ; Callout param struct for override capabilities of a device. + + ; If the optional callout is implemented this param struct is passed to it. + +DEVICE_CAP_CALLOUT_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < The header + ; Match fields + HostSocket UINT8 ? ; < The Socket on which this chain is located. + HostLink UINT8 ? ; < The Link on the host for this chain. + Depth UINT8 ? ; < The Depth in the I/O chain from the Host. + DevVenId UINT32 ? ; < The Device's PCI Vendor + Device ID (offset 0x00). + Revision UINT8 ? ; < The Device's PCI Revision field (offset 0x08). + Link UINT8 ? ; < The Device's Link number (0 or 1). + PciAddress PCI_ADDR {} ; < The Device's PCI Address. + ; Override fields + LinkWidthIn POINTER ? ; < modify to change the Link Width In. + LinkWidthOut POINTER ? ; < modify to change the Link Width Out. + FreqCap POINTER ? ; < modify to change the Link's frequency capability. + Clumping POINTER ? ; < modify to change Unit ID clumping support. +DEVICE_CAP_CALLOUT_PARAMS ENDS + + ; Limits for CPU to CPU Links. + + ; For each coherent connection this interface is checked once. + ; Provide the frequency and width if needed for this Link (usually based on board + ; restriction). This is used with CPU device capabilities and northbridge limits + ; to compute the default settings. + +CPU_TO_CPU_PCB_LIMITS STRUCT + ; Match fields + SocketA UINT8 ? ; < One Socket on which this Link is located + LinkA UINT8 ? ; < The Link on this Node + SocketB UINT8 ? ; < The other Socket on which this Link is located + LinkB UINT8 ? ; < The Link on that Node + ; Limit fields + ABLinkWidthLimit UINT8 ? ; < modify to change the Link Width A->B + BALinkWidthLimit UINT8 ? ; < modify to change the Link Width B-<A + PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability +CPU_TO_CPU_PCB_LIMITS ENDS + + ; Get limits for non-coherent Links. + + ; For each non-coherent connection this interface is checked once. + ; Provide the frequency and width if needed for this Link (usually based on board + ; restriction). This is used with device capabilities, device overrides, and northbridge limits + ; to compute the default settings. + +IO_PCB_LIMITS STRUCT + ; Match fields + HostSocket UINT8 ? ; < The Socket on which this Link is located + HostLink UINT8 ? ; < The Link about to be initialized + Depth UINT8 ? ; < The Depth in the I/O chain from the Host + ; Limit fields + DownstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width going away from processor + UpstreamLinkWidthLimit UINT8 ? ; < modify to change the Link Width moving toward processor + PcbFreqCap UINT32 ? ; < modify to change the Link's frequency capability +IO_PCB_LIMITS ENDS + + ; Manually control bus number assignment. + + ; This interface is checked every time a non-coherent chain is processed. + ; If a system can not use the auto Bus numbering feature for non-coherent chain bus + ; assignments, this interface can provide explicit control. For each chain, provide + ; the bus number range to use. + +OVERRIDE_BUS_NUMBERS STRUCT + ; Match fields + Socket UINT8 ? ; < The Socket on which this chain is located + Link UINT8 ? ; < The Link on the host for this chain + ; Override fields + SecBus UINT8 ? ; < Secondary Bus number for this non-coherent chain + SubBus UINT8 ? ; < Subordinate Bus number +OVERRIDE_BUS_NUMBERS ENDS + + + ; Ignore a Link. + + ; This interface is checked every time a coherent Link is found and then every + ; time a non-coherent Link from a CPU is found. + ; Any coherent or non-coherent Link from a CPU can be ignored and not used + ; for discovery or initialization. Useful for connection based systems. + ; (Note: not checked for IO device to IO Device Links.) + +IGNORE_LINK STRUCT + ; Match fields + Socket UINT8 ? ; < The Socket on which this Link is located + Link UINT8 ? ; < The Link about to be initialized + ; Customization fields + LinkState FINAL_LINK_STATE ? ; < The link may be left unitialized, or powered off. +IGNORE_LINK ENDS + + + ; Skip reganging of subLinks. + + ; This interface is checked whenever two subLinks are both connected to the same CPUs. + ; Normally, unganged sublinks between the same two CPUs are reganged. + ; Provide a matching structure to leave the Links unganged. + +SKIP_REGANG STRUCT + ; Match fields + SocketA UINT8 ? ; < One Socket on which this Link is located + LinkA UINT8 ? ; < The Link on this Node + SocketB UINT8 ? ; < The other Socket on which this Link is located + LinkB UINT8 ? ; < The Link on that Node + ; Customization fields + LinkState FINAL_LINK_STATE ? ; < The paired sublink may be active, or powered off. +SKIP_REGANG ENDS + + ; The System Socket layout, which sockets are physically connected. + + ; The hardware method for Socket naming is preferred. Use this software method only + ; if required. + +SYSTEM_PHYSICAL_SOCKET_MAP STRUCT + CurrentSocket UINT8 ? ; < The socket from which this connection originates. + CurrentLink UINT8 ? ; < The Link from the source socket connects to another socket. + TargetSocket UINT8 ? ; < The target socket which is connected on that link. +SYSTEM_PHYSICAL_SOCKET_MAP ENDS + +; ---------------------------------------------------------------------------- + + ; This is the input structure for AmdHtInitialize. + +AMD_HT_INTERFACE STRUCT + ; Basic level customization + AutoBusStart UINT8 ? ; < For automatic bus number assignment, starting bus number usually zero. + AutoBusMax UINT8 ? ; < For automatic bus number assignment, do not assign above max. + AutoBusIncrement UINT8 ? ; < For automatic bus number assignment, each chain gets this many busses. + + ; Advanced Level Customization + ManualBuidSwapList POINTER ? ; < Provide Manual Swap List, if any. + DeviceCapOverrideList POINTER ? ; < Provide Device Overrides, if any. + CpuToCpuPcbLimitsList POINTER ? ; < Provide CPU PCB Limits, if any. + IoPcbLimitsList POINTER ? ; < Provide IO PCB Limits, if any. + OverrideBusNumbersList POINTER ? ; < Provide manual Bus Number assignment, if any. + ; < Use either auto bus numbering or override bus + ; < numbers, not both. + + IgnoreLinkList POINTER ? ; < Provide links to ignore, if any. + SkipRegangList POINTER ? ; < Provide links to remain unganged, if any. + + ; Expert Level Customization + Topolist POINTER ? ; < Use this topology list in addition to the built in, if not NULL. + SystemPhysicalSocketMap POINTER ? + ; < The hardware socket naming method is preferred, + ; < If it can't be used, this provides a software method. +AMD_HT_INTERFACE ENDS + +; ----------------------------------------------------------------------------- + + ; HT Recovery Interface + + + +; ----------------------------------------------------------------------------- +; * HT Recovery DEFINITIONS AND MACROS +; * +; *----------------------------------------------------------------------------- +; + + ; BBHT subfunction events + HT_EVENT_BB_EVENTS EQU 10005000h + HT_EVENT_BB_BUID_EXCEED EQU 10015000h + HT_EVENT_BB_DEVICE_FAILED EQU 10055000h + HT_EVENT_BB_AUTO_DEPTH EQU 10065000h + +; ---------------------------------------------------------------------------- +; * HT Recovery TYPEDEFS, STRUCTURES, ENUMS +; * +; *---------------------------------------------------------------------------- +; + + + ; The Interface structure to Recovery HT. + +AMD_HT_RESET_INTERFACE STRUCT + ManualBuidSwapList POINTER ? ; < Option to manually control SB link init + Depth UINT32 ? ; < If auto init was used this is set to the depth of the chain, + ; < else, for manual init unmodified. +AMD_HT_RESET_INTERFACE ENDS + +; --------------------------------------------------------------------------- +; CPU Feature related info +; --------------------------------------------------------------------------- + ; Build Configuration values for BLDCFG_PLATFORM_C1E_MODE + C1eModeDisabled EQU 0 ; < Disabled + C1eModeHardware EQU 1 ; < Hardware method + C1eModeMsgBased EQU 2 ; < Message-based method + C1eModeSoftwareDeprecated EQU 3 ; < Deprecated software SMI method + C1eModeHardwareSoftwareDeprecated EQU 4 ; < Hardware or Deprecated software SMI method + MaxC1eMode EQU 5 ; < Not a valid value, used for verifying input +PLATFORM_C1E_MODES TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_PLATFORM_CSTATE_MODE + CStateModeDisabled EQU 0 ; < Disabled + CStateModeC6 EQU 1 ; < C6 State + MaxCStateMode EQU 2 ; < Not a valid value, used for verifying input +PLATFORM_CSTATE_MODES TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_PLATFORM_CPB_MODE + CpbModeAuto EQU 0 ; < Auto + CpbModeDisabled EQU 1 ; < Disabled + MaxCpbMode EQU 2 ; < Not a valid value, used for verifying input +PLATFORM_CPB_MODES TEXTEQU <DWORD> + + +;---------------------------------------------------------------------------- +; GNB PCIe configuration info +;---------------------------------------------------------------------------- + +GNB_EVENT_INVALID_CONFIGURATION EQU 20010000h ; User configuration invalid +GNB_EVENT_INVALID_PCIE_TOPOLOGY_CONFIGURATION EQU 20010001h ; Requested lane allocation for PCIe port can not be supported +GNB_EVENT_INVALID_PCIE_PORT_CONFIGURATION EQU 20010002h ; Requested incorrect PCIe port device address +GNB_EVENT_INVALID_DDI_LINK_CONFIGURATION EQU 20010003h ; Incorrect parameter in DDI link configuration +GNB_EVENT_INVALID_LINK_WIDTH_CONFIGURATION EQU 20010004h ; Invalid with for PCIe port or DDI link +GNB_EVENT_INVALID_LANES_CONFIGURATION EQU 20010005h ; Lane double subscribe lanes +GNB_EVENT_INVALID_DDI_TOPOLOGY_CONFIGURATION EQU 20010006h ; Requested lane allocation for DDI link(s) can not be supported +GNB_EVENT_LINK_TRAINING_FAIL EQU 20020000h ; PCIe Link training fail +GNB_EVENT_BROKEN_LANE_RECOVERY EQU 20030000h ; Broken lane workaround applied to recover link training +GNB_EVENT_GEN2_SUPPORT_RECOVERY EQU 20040000h ; Scale back to GEN1 to recover link training + +DESCRIPTOR_TERMINATE_LIST EQU 80000000h + +PCIe_PORT_MISC_CONTROL STRUCT + LinkComplianceMode UINT8 ? + ;IN UINT8 LinkComplianceMode :1; ;< Force port into compliance mode (device will not be trained, port output compliance pattern) +PCIe_PORT_MISC_CONTROL ENDS + +PCIe_PORT_DATA STRUCT + PortPresent UINT8 ? ; < Enable PCIe port for initialization. + ChannelType UINT8 ? ; < Channel type. + ; 0 - "lowLoss", + ; 1 - "highLoss", + ; 2 - "mob0db", + ; 3 - "mob3db", + ; 4 - "extnd6db" + ; 5 - "extnd8db" + ; + DeviceNumber UINT8 ? ; < Device number for port. Available device numbers may very on different CPUs. + FunctionNumber UINT8 ? ; < Reserved for future use + LinkSpeedCapability UINT8 ? ; < Advertised Gen Capability + ; 0 - Maximum supported by silicon + ; 1 - Gen1 + ; 2 - Gen2 + ; 3 - Gen3 + ; + LinkAspm UINT8 ? ; < ASPM control. (see OemPcieLinkAspm for additional option to control ASPM) + ; 0 - Disabled + ; 1 - L0s only + ; 2 - L1 only + ; 2 - L0s and L1 + ; + LinkHotplug UINT8 ? ; < Hotplug control. + ; 0 - Disabled + ; 1 - Basic + ; 2 - Server + ; 3 - Enhanced + ; + ResetId UINT8 ? ; < Arbitrary number greater than 0 assigned by platform firmware for GPIO + ; identification which control reset for given port. + ; Each port with unique GPIO should have unique ResetId assigned. + ; All ports use same GPIO to control reset should have same ResetId assigned. + ; see AgesaPcieSlotResetControl + ; + MiscControls PCIe_PORT_MISC_CONTROL {} ; < Misc extended controls +PCIe_PORT_DATA ENDS + +;DDI channel lane mapping + +CHANNEL_MAPPING STRUCT ; + Lane0 UINT8 ? ; + ;IN UINT8 Lane0 :2; ; + ;IN UINT8 Lane1 :2; ///< Lane 1 mapping (see "Lane 0 mapping") + ;IN UINT8 Lane2 :2; ///< Lane 2 mapping (see "Lane 0 mapping") + ;IN UINT8 Lane3 :2; ///< Lane 3 mapping (see "Lane 0 mapping") +CHANNEL_MAPPING ENDS ; + +CONN_CHANNEL_MAPPING UNION + ChannelMappingValue UINT8 ? ; < Raw lane mapping + ChannelMapping CHANNEL_MAPPING {} ; +CONN_CHANNEL_MAPPING ENDS ; + +; DDI Configuration +PCIe_DDI_DATA STRUCT + ConnectorType UINT8 ? ; < Display Connector Type + ; 0 - DP + ; 1 - eDP + ; 2 - Single Link DVI + ; 3 - Dual Link DVI + ; 4 - HDMI + ; 5 - Travis DP-to-VGA + ; 6 - Travis DP-to-LVDS + ; 7 - Hudson-2 NutMeg DP-to-VGA + ; 8 - Single Link DVI-I + ; 9 - CRT (VGA) + ; 10 - LVDS + ; 11 - VBIOS auto detect connector type + AuxIndex UINT8 ? ; < Indicates which AUX or DDC Line is used + ; 0 - AUX1 + ; 1 - AUX2 + ; 2 - AUX3 + ; 3 - AUX4 + ; 4 - AUX5 + ; 5 - AUX6 + ; + HdpIndex UINT8 ? ; < Indicates which HDP pin is used + ; 0 - HDP1 + ; 1 - HDP2 + ; 2 - HDP3 + ; 3 - HDP4 + ; 4 - HDP5 + ; 5 - HDP6 + Mapping CONN_CHANNEL_MAPPING (2) DUP ({}) ;< Set specific mapping of lanes to connector pins + ;Mapping[0] define mapping for group of 4 lanes starting at PCIe_ENGINE_DATA.StartLane + ;Mapping[1] define mapping for group of 4 lanes ending at PCIe_ENGINE_DATA.EndLane (only + ;applicable for Dual DDI link) + ;if Mapping[x] set to 0 than default mapping assumed + +PCIe_DDI_DATA ENDS + + +; Engine Configuration +PCIe_ENGINE_DATA STRUCT + EngineType UINT8 ? ; < Engine type + ; 0 - Ignore engine configuration + ; 1 - PCIe port + ; 2 - DDI + StartLane UINT16 ? ; < Start lane number (in reversed configuration StartLane > EndLane). + EndLane UINT16 ? ; < End lane number (in reversed configuration StartLane > EndLane). +PCIe_ENGINE_DATA ENDS + +; PCIe port descriptor +PCIe_PORT_DESCRIPTOR STRUCT + Flags UINT32 ? ; < Descriptor flags + ; Bit31 - last descriptor in complex + EngineData PCIe_ENGINE_DATA {} ; < Engine data + Port PCIe_PORT_DATA {} ; < PCIe port specific configuration info +PCIe_PORT_DESCRIPTOR ENDS + +; DDI descriptor +PCIe_DDI_DESCRIPTOR STRUCT + Flags UINT32 ? ; < Descriptor flags + EngineData PCIe_ENGINE_DATA {} ; < Engine data + Ddi PCIe_DDI_DATA {} ; < DDI port specific configuration info +PCIe_DDI_DESCRIPTOR ENDS + +; Slot Reset Info +PCIe_SLOT_RESET_INFO STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header + ResetId UINT8 ? ; < Slot reset ID as specified in PCIe_PORT_DESCRIPTOR + ResetControl UINT8 ? ; < Reset control as defined by PCIE_RESET_CONTROL +PCIe_SLOT_RESET_INFO ENDS + + +; PCIe Complex descriptor +PCIe_COMPLEX_DESCRIPTOR STRUCT + Flags UINT32 ? ; < Descriptor flags + ; Bit31 - last descriptor in topology + ; + ; + SocketId UINT32 ? ; < Socket Id + PciePortList POINTER ? ;< Pointer to array of PCIe port descriptors or NULL (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + DdiLinkList POINTER ? ;< Pointer to array DDI link descriptors (Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST). + Reserved POINTER ? ;< Reserved for future use +PCIe_COMPLEX_DESCRIPTOR ENDS + + AssertSlotReset EQU 0 + DeassertSlotReset EQU 1 +PCIE_RESET_CONTROL TEXTEQU <DWORD> + + PcieUnusedEngine EQU 0 + PciePortEngine EQU 1 + PcieDdiEngine EQU 2 + MaxPcieEngine EQU 3 ; < Not a valid value, used for verifying input +PCIE_ENGINE_TYPE TEXTEQU <DWORD> + + PcieGenMaxSupported EQU 0 + PcieGen1 EQU 1 + PcieGen2 EQU 2 + MaxPcieGen EQU 3 ; < Not a valid value, used for verifying input +PCIE_LINK_SPEED_CAP TEXTEQU <DWORD> + + PsppDisabled EQU 0 + PsppPerformance EQU 1 + PsppBalanceHigh EQU 2 + PsppBalanceLow EQU 3 + PsppPowerSaving EQU 4 + MaxPspp EQU 5 ; < Not a valid value, used for verifying input +PCIE_PSPP_POLICY TEXTEQU <DWORD> + + ConnectorTypeDP EQU 0 + ConnectorTypeEDP EQU 1 + ConnectorTypeSingleLinkDVI EQU 2 + ConnectorTypeDualLinkDVI EQU 3 + ConnectorTypeHDMI EQU 4 + ConnectorTypeTravisDpToVga EQU 5 + ConnectorTypeTravisDpToLvds EQU 6 + ConnectorTypeNutmegDpToVga EQU 7 + ConnectorTypeSingleLinkDviI EQU 8 + ConnectorTypeCrt EQU 9 + ConnectorTypeLvds EQU 10 + ConnectorTypeAutoDetect EQU 11 + MaxConnectorType EQU 12 ; < Not a valid value, used for verifying input +PCIE_CONNECTOR_TYPE TEXTEQU <DWORD> + + ChannelTypeLowLoss EQU 0 + ChannelTypeHighLoss EQU 1 + ChannelTypeMob0db EQU 2 + ChannelTypeMob3db EQU 3 + ChannelTypeExt6db EQU 4 + ChannelTypeExt8db EQU 5 + MaxChannelType EQU 6 ; < Not a valid value, used for verifying input +PCIE_CHANNEL_TYPE TEXTEQU <DWORD> + + AspmDisabled EQU 0 + AspmL0s EQU 1 + AspmL1 EQU 2 + AspmL0sL1 EQU 3 + MaxAspm EQU 4 ; < Not a valid value, used for verifying input +PCIE_ASPM_TYPE TEXTEQU <DWORD> + + HotplugDisabled EQU 0 + HotplugBasic EQU 1 + HotplugServer EQU 2 + HotplugEnhanced EQU 3 + HotplugInboard EQU 4 + MaxHotplug EQU 5 ; < Not a valid value, used for verifying input +PCIE_HOTPLUG_TYPE TEXTEQU <DWORD> + + PortDisabled EQU 0 + PortEnabled EQU 1 +PCIE_PORT_ENABLE TEXTEQU <DWORD> + + Aux1 EQU 0 + Aux2 EQU 1 + Aux3 EQU 2 + Aux4 EQU 3 + Aux5 EQU 4 + Aux6 EQU 5 + MaxAux EQU 6 ; < Not a valid value, used for verifying input +PCIE_AUX_TYPE TEXTEQU <DWORD> + + Hdp1 EQU 0 + Hdp2 EQU 1 + Hdp3 EQU 2 + Hdp4 EQU 3 + Hdp5 EQU 4 + Hdp6 EQU 5 + MaxHdp EQU 6 ; < Not a valid value, used for verifying input +PCIE_HDP_TYPE TEXTEQU <DWORD> + +;---------------------------------------------------------------------------- +; GNB configuration info +;---------------------------------------------------------------------------- +; + +; Configuration settings for GNB. +GNB_ENV_CONFIGURATION STRUCT + Gnb3dStereoPinIndex UINT8 ? ;< 3D Stereo Pin ID. + ; @li 0 = Stereo 3D is disabled (default). + ; @li 1 = Use processor pin HPD1. + ; @li 2 = Use processor pin HPD2 + ; @li 3 = Use processor pin HPD3 + ; @li 4 = Use processor pin HPD4 + ; @li 5 = Use processor pin HPD5 + ; @li 6 = Use processor pin HPD6 + LvdsSpreadSpectrum UINT16 ? ; Spread spectrum value in 0.01 % + LvdsSpreadSpectrumRate UINT16 ? ; Spread spectrum frequency used by SS hardware logic in unit of 10Hz, 0 - default frequency 40kHz +GNB_ENV_CONFIGURATION ENDS + +; GNB configuration info +GNB_CONFIGURATION STRUCT + PcieComplexList POINTER ? ; Pointer to array of PCIe_COMPLEX_DESCRIPTOR structures describe PCIe topology on each processor package or NULL. + ; Last element of array must be terminated with DESCRIPTOR_TERMINATE_LIST + ; + ; + ; + ; Topology organization definition assume PCIe_COMPLEX_DESCRIPTOR defined first following + ; PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR for given PCIe_COMPLEX_DESCRIPTOR + ; defined in arbitrary sequence: + ; Example of topology definition for single socket system: + ; PlatfromTopology LABEL DWORD + ; + ; Port0_2 PCIe_PORT_DESCRIPTOR <>; + ; Port0_3 PCIe_PORT_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST> ; + ; ... + ; Ddi0_A PCIe_DDI_DESCRIPTOR <>; + ; Ddi0_B PCIe_DDI_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST,>; + ; ... + ; Cpu0 PCIe_COMPLEX_DESCRIPTOR <DESCRIPTOR_TERMINATE_LIST, 0, Port0_2, Ddi0_A> + ; + ; + PsppPolicy UINT8 ? ;< PSPP (PCIe Speed Power Policy) + ; @li @b 0 - Disabled + ; @li @b 1 - Performance + ; @li @b 2 - Balance-High + ; @li @b 3 - Balance-Low + ; @li @b 4 - Power Saving + ; +GNB_CONFIGURATION ENDS + + +; --------------------------------------------------------------------------- + +; MEMORY-SPECIFIC DATA STRUCTURES + +; --------------------------------------------------------------------------- + + + ; AGESA MAXIMIUM VALUES + + ; These Max values are used to define array sizes and associated loop + ; counts in the code. They reflect the maximum values that AGESA + ; currently supports and does not necessarily reflect the hardware + ; capabilities of configuration. + + + MAX_SOCKETS_SUPPORTED EQU 8 ; < Max number of sockets in system + MAX_CHANNELS_PER_SOCKET EQU 4 ; < Max Channels per sockets + MAX_DIMMS_PER_CHANNEL EQU 4 ; < Max DIMMs on a memory channel (independent of platform) + NUMBER_OF_DELAY_TABLES EQU 9 ; < Number of tables defined in CH_DEF_STRUCT. + ; < Eg: UINT16 *RcvEnDlys; + ; < UINT8 *WrDqsDlys; + ; < UINT8 *RdDqsDlys; + ; < UINT8 *WrDatDlys; + ; < UINT8 *RdDqsMinDlys; + ; < UINT8 *RdDqsMaxDlys; + ; < UINT8 *WrDatMinDlys; + ; < UINT8 *WrDatMaxDlys; + NUMBER_OF_FAILURE_MASK_TABLES EQU 1 ; < Number of failure mask tables + MAX_PLATFORM_TYPES EQU 16 ; < Platform types per system + + MCT_TRNG_KEEPOUT_START EQU 00004000h ; < base [39:8] + MCT_TRNG_KEEPOUT_END EQU 00007FFFh ; < base [39:8] + + UMA_ATTRIBUTE_INTERLEAVE EQU 80000000h ; < Uma Region is interleaved + UMA_ATTRIBUTE_ON_DCT0 EQU 40000000h ; < UMA resides on memory that belongs to DCT0 + UMA_ATTRIBUTE_ON_DCT1 EQU 20000000h ; < UMA resides on memory that belongs to DCT1 + + PSO_TABLE TEXTEQU <UINT8>; < Platform Configuration Table + + ; AGESA DEFINITIONS + + ; Many of these are derived from the platform and hardware specific definitions + + ; EccSymbolSize override value + ECCSYMBOLSIZE_USE_BKDG EQU 0 ; < Use BKDG Recommended Value + ECCSYMBOLSIZE_FORCE_X4 EQU 4 ; < Force to x4 + ECCSYMBOLSIZE_FORCE_X8 EQU 8 ; < Force to x8 + ; CPU Package Type + PT_L1 EQU 0 ; < L1 Package type + PT_M2 EQU 1 ; < AM Package type + PT_S1 EQU 2 ; < S1 Package type + + ; Structures use to pass system Logical CPU-ID +CPU_LOGICAL_ID STRUCT + Family UINT64 ? ; < Indicates logical ID Family + Revision UINT64 ? ; < Indicates logical ID Family +CPU_LOGICAL_ID ENDS + + ; Build Configuration values for BLDCFG_AMD_PLATFORM_TYPE + + AMD_PLATFORM_SERVER EQU 8000h ; < Server + AMD_PLATFORM_DESKTOP EQU 10000h ; < Desktop + AMD_PLATFORM_MOBILE EQU 20000h ; < Mobile +AMD_PLATFORM_TYPE TEXTEQU <DWORD> + + ; Dram technology type + + DDR2_TECHNOLOGY EQU 0 ; < DDR2 technology + DDR3_TECHNOLOGY EQU 1 ; < DDR3 technology +TECHNOLOGY_TYPE TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT & BLDCFG_MEMORY_CLOCK_SELECT + + DDR400_FREQUENCY EQU 200 ; < DDR 400 + DDR533_FREQUENCY EQU 266 ; < DDR 533 + DDR667_FREQUENCY EQU 333 ; < DDR 667 + DDR800_FREQUENCY EQU 400 ; < DDR 800 + DDR1066_FREQUENCY EQU 533 ; < DDR 1066 + DDR1333_FREQUENCY EQU 667 ; < DDR 1333 + DDR1600_FREQUENCY EQU 800 ; < DDR 1600 + DDR1866_FREQUENCY EQU 933 ; < DDR 1866 + UNSUPPORTED_DDR_FREQUENCY EQU 934 ; < Highest limit of DDR frequency +MEMORY_BUS_SPEED TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_MEMORY_QUADRANK_TYPE + + QUADRANK_REGISTERED EQU 0 + QUADRANK_UNBUFFERED EQU 1 +QUANDRANK_TYPE TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_TIMING_MODE_SELECT + + TIMING_MODE_AUTO EQU 0 ; < Use best rate possible + TIMING_MODE_LIMITED EQU 1 ; < Set user top limit + TIMING_MODE_SPECIFIC EQU 2 ; < Set user specified speed +USER_MEMORY_TIMING_MODE TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_POWER_DOWN_MODE + + POWER_DOWN_BY_CHANNEL EQU 0 + POWER_DOWN_BY_CHIP_SELECT EQU 1 + POWER_DOWN_AUTO EQU 2 +POWER_DOWN_MODE TEXTEQU <DWORD> + + ; Low voltage support + + VOLT1_5 EQU 0 ; < 1.5 Volt + VOLT1_35 EQU 1 ; < 1.35 Volt + VOLT1_25 EQU 2 ; < 1.25 Volt + VOLT_UNSUPPORTED EQU 0xFF ; < No common voltage found +DIMM_VOLTAGE TEXTEQU <DWORD> + + ; UMA Mode + + UMA_NONE EQU 0 ; < UMA None + UMA_SPECIFIED EQU 1 ; < UMA Specified + UMA_AUTO EQU 2 ; < UMA Auto +UMA_MODE TEXTEQU <DWORD> + + ; Build Configuration values for BLDCFG_UMA_ALIGNMENT + + NO_UMA_ALIGNED EQU 00FFFFFFh + UMA_128MB_ALIGNED EQU 00FFF800h + UMA_256MB_ALIGNED EQU 00FFF000h + UMA_512MB_ALIGNED EQU 00FFE000h +UMA_ALIGNMENT TEXTEQU <DWORD> + ; =============================================================================== + ; Global MCT Configuration Status Word (GStatus) + ; =============================================================================== + + GsbMTRRshort EQU 0 ; < Ran out of MTRRs while mapping memory + GsbAllECCDimms EQU 1 ; < All banks of all Nodes are ECC capable + GsbDramECCDis EQU 2 ; < Dram ECC requested but not enabled. + GsbSoftHole EQU 3 ; < A Node Base gap was created + GsbHWHole EQU 4 ; < A HW dram remap was created + GsbNodeIntlv EQU 5 ; < Node Memory interleaving was enabled + GsbSpIntRemapHole EQU 6 ; < Special condition for Node Interleave and HW remapping + GsbEnDIMMSpareNW EQU 7 ; < Indicates that DIMM Spare can be used without a warm reset + + GsbEOL EQU 8 ; < End of list +GLOBAL_STATUS_FIELD TEXTEQU <DWORD> + +; =============================================================================== + ; Local Error Status (DIE_STRUCT.ErrStatus[31:0]) +; =============================================================================== + + EsbNoDimms EQU 0 ; < No DIMMs + EsbSpdChkSum EQU 1 ; < SPD Checksum fail + EsbDimmMismatchM EQU 2 ; < dimm module type(buffer) mismatch + EsbDimmMismatchT EQU 3 ; < dimm CL/T mismatch + EsbDimmMismatchO EQU 4 ; < dimm organization mismatch (128-bit) + EsbNoTrcTrfc EQU 5 ; < SPD missing Trc or Trfc info + EsbNoCycTime EQU 6 ; < SPD missing byte 23 or 25 + EsbBkIntDis EQU 7 ; < Bank interleave requested but not enabled + EsbDramECCDis EQU 8 ; < Dram ECC requested but not enabled + EsbSpareDis EQU 9 ; < Online spare requested but not enabled + EsbMinimumMode EQU 10 ; < Running in Minimum Mode + EsbNoRcvrEn EQU 11 ; < No DQS Receiver Enable pass window found + EsbSmallRcvr EQU 12 ; < DQS Rcvr En pass window too small (far right of dynamic range) + EsbNoDqsPos EQU 13 ; < No DQS-DQ passing positions + EsbSmallDqs EQU 14 ; < DQS-DQ passing window too small + EsbDCBKScrubDis EQU 15 ; < DCache scrub requested but not enabled + + EsbEMPNotSupported EQU 16 ; < Processor is not capable for EMP. + EsbEMPConflict EQU 17 ; < EMP requested but cannot be enabled since + ; < channel interleaving, bank interleaving, or bank swizzle is enabled. + EsbEMPDis EQU 18 ; < EMP requested but cannot be enabled since + ; < memory size of each DCT is not a power of two. + + EsbEOL EQU 19 ; < End of list +ERROR_STATUS_FIELD TEXTEQU <DWORD> + +; =============================================================================== + ; Local Configuration Status (DIE_STRUCT.Status[31:0]) +; =============================================================================== + + SbRegistered EQU 0 ; < All DIMMs are Registered + SbEccDimms EQU 1 ; < All banks ECC capable + SbParDimms EQU 2 ; < All banks Addr/CMD Parity capable + SbDiagClks EQU 3 ; < Jedec ALL slots clock enable diag mode + Sb128bitmode EQU 4 ; < DCT in 128-bit mode operation + Sb64MuxedMode EQU 5 ; < DCT in 64-bit mux'ed mode. + Sb2TMode EQU 6 ; < 2T CMD timing mode is enabled. + SbSWNodeHole EQU 7 ; < Remapping of Node Base on this Node to create a gap. + SbHWHole EQU 8 ; < Memory Hole created on this Node using HW remapping. + SbOver400Mhz EQU 9 ; < DCT freq greater than or equal to 400MHz flag + SbDQSPosPass2 EQU 10 ; < Used for TrainDQSPos DIMM0/1, when freq greater than or equal to 400MHz + SbDQSRcvLimit EQU 11 ; < Used for DQSRcvEnTrain to know we have reached the upper bound. + SbExtConfig EQU 12 ; < Indicate the default setting for extended PCI configuration support + SbLrdimms EQU 13 ; < All DIMMs are LRDIMMs + SbEOL EQU 14 ; < End of list +LOCAL_STATUS_FIELD TEXTEQU <DWORD> + + +; < CPU MSR Register definitions ------------------------------------------ + SYS_CFG EQU 0C0010010h + TOP_MEM EQU 0C001001Ah + TOP_MEM2 EQU 0C001001Dh + HWCR EQU 0C0010015h + NB_CFG EQU 0C001001Fh + + FS_BASE EQU 0C0000100h + IORR0_BASE EQU 0C0010016h + IORR0_MASK EQU 0C0010017h + BU_CFG EQU 0C0011023h + BU_CFG2 EQU 0C001102Ah + COFVID_STAT EQU 0C0010071h + TSC EQU 10h + +; =============================================================================== + ; SPD Data for each DIMM +; =============================================================================== +SPD_DEF_STRUCT STRUCT + DimmPresent BOOLEAN ? ; < Indicates that the DIMM is present and Data is valid + Data UINT8 (256) DUP (?) ; < Buffer for 256 Bytes of SPD data from DIMM +SPD_DEF_STRUCT ENDS + +; =============================================================================== + ; Channel Definition Structure + ; This data structure defines entries that are specific to the channel initialization +; =============================================================================== +CH_DEF_STRUCT STRUCT + ChannelID UINT8 ? ; < Physical channel ID of a socket(0 = CH A, 1 = CH B, 2 = CH C, 3 = CH D) + TechType TECHNOLOGY_TYPE ? ; < Technology type of this channel + ChDimmPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is present. + ; < DIMM# Select Signal + ; < 0 MA0_CS_L[0, 1] + ; < 1 MB0_CS_L[0, 1] + ; < 2 MA1_CS_L[0, 1] + ; < 3 MB1_CS_L[0, 1] + ; < 4 MA2_CS_L[0, 1] + ; < 5 MB2_CS_L[0, 1] + ; < 6 MA3_CS_L[0, 1] + ; < 7 MB3_CS_L[0, 1] + + DCTPtr POINTER ? ; < Pointer to the DCT data of this channel. + MCTPtr POINTER ? ; < Pointer to the node data of this channel. + SpdPtr POINTER ? ; < Pointer to the SPD data for this channel. (Setup by NB Constructor) + DimmSpdPtr POINTER (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of pointers to + ; < SPD Data for each Dimm. (Setup by Tech Block Constructor) + ChDimmValid UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is valid and is/will be configured where 4..7 are reserved. + RegDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a registered DIMM where 4..7 are reserved. + LrDimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. + SODimmPresent UINT8 ? ; < For each bit n 0..3, 1 = DIMM n is a SO-DIMM where 4..7 are reserved. + Loads UINT8 ? ; < Number of devices loading bus + Dimms UINT8 ? ; < Number of DIMMs loading Channel + Ranks UINT8 ? ; < Number of ranks loading Channel DATA + SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) + ; < FALSE = 1T + ; < TRUE = 2T + ; < The following pointers will be pointed to dynamically allocated buffers. + ; < Each buffer is two dimensional (RowCount x ColumnCount) and is lay-outed as in below. + ; < Example: If DIMM and Byte based training, then + ; < XX is a value in Hex + ; < BYTE 0, BYTE 1, BYTE 2, BYTE 3, BYTE 4, BYTE 5, BYTE 6, BYTE 7, ECC BYTE + ; < Row1 - Logical DIMM0 XX XX XX XX XX XX XX XX XX + ; < Row2 - Logical DIMM1 XX XX XX XX XX XX XX XX XX + RcvEnDlys POINTER ? ; < DQS Receiver Enable Delays + WrDqsDlys POINTER ? ; < Write DQS delays (only valid for DDR3) + RdDqsDlys POINTER ? ; < Read Dqs delays + WrDatDlys POINTER ? ; < Write Data delays + RdDqsMinDlys POINTER ? ; < Minimum Window for Read DQS + RdDqsMaxDlys POINTER ? ; < Maximum Window for Read DQS + WrDatMinDlys POINTER ? ; < Minimum Window for Write data + WrDatMaxDlys POINTER ? ; < Maximum Window for Write data + RowCount UINT8 ? ; < Number of rows of the allocated buffer. + ColumnCount UINT8 ? ; < Number of columns of the allocated buffer. + + FailingBitMask POINTER ? ; < Table of masks to Track Failing bits + DctOdcCtl UINT32 ? ; < Output Driver Strength (see BKDG FN2:Offset 9Ch, index 00h) + DctAddrTmg UINT32 ? ; < Address Bus Timing (see BKDG FN2:Offset 9Ch, index 04h) + PhyRODTCSLow UINT32 ? ; < Phy Read ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 180h) + PhyRODTCSHigh UINT32 ? ; < Phy Read ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 181h) + PhyWODTCSLow UINT32 ? ; < Phy Write ODT Pattern Chip Select low (see BKDG FN2:Offset 9Ch, index 182h) + PhyWODTCSHigh UINT32 ? ; < Phy Write ODT Pattern Chip Select high (see BKDG FN2:Offset 9Ch, index 183) + PhyWLODT UINT8 (4) DUP (?) ; < Write Levelization ODT Pattern for Dimm 0-3 (see BKDG FN2:Offset 9Ch, index 0x8[11:8]) + DctEccDqsLike UINT16 ? ; < DCT DQS ECC UINT8 like... + DctEccDqsScale UINT8 ? ; < DCT DQS ECC UINT8 scale + PtrPatternBufA UINT16 ? ; < Ptr on stack to aligned DQS testing pattern + PtrPatternBufB UINT16 ? ; < Ptr on stack to aligned DQS testing pattern + ByteLane UINT8 ? ; < Current UINT8 Lane (0..7) + Direction UINT8 ? ; < Current DQS-DQ training write direction (0=read, 1=write) + Pattern UINT8 ? ; < Current pattern + DqsDelay UINT8 ? ; < Current DQS delay value + HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. + HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. + DctMaxRdLat UINT16 ? ; < Max Read Latency (ns) for the DCT + DIMMValidCh UINT8 ? ; < DIMM# in CH + MaxCh UINT8 ? ; < Max number of CH in system + Dct UINT8 ? ; < Dct pointer + WrDatGrossH UINT8 ? ; < Write Data Gross delay high value + DqsRcvEnGrossL UINT8 ? ; < DQS Receive Enable Gross Delay low + + TrwtWB UINT8 ? ; < Non-SPD timing value for TrwtWB + CurrRcvrDctADelay UINT8 ? ; < for keep current RcvrEnDly + T1000 UINT16 ? ; < get the T1000 figure (cycle time (ns) * 1K) + DqsRcvEnPass UINT8 ? ; < for TrainRcvrEn UINT8 lane pass flag + DqsRcvEnSaved UINT8 ? ; < for TrainRcvrEn UINT8 lane saved flag + SeedPass1Remainder UINT8 ? ; < for Phy assisted DQS receiver enable training + + ClToNbFlag UINT8 ? ; < is used to restore ClLinesToNbDis bit after memory + NodeSysBase UINT32 ? ; < for channel interleave usage + RefRawCard UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Array of rawcards detected + CtrlWrd02 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 2 values per DIMM + CtrlWrd03 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 3 values per DIMM + CtrlWrd04 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 4 values per DIMM + CtrlWrd05 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 5 values per DIMM + CtrlWrd08 UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Control Word 8 values per DIMM + + CsPresentDCT UINT16 ? ; < For each bit n 0..7, 1 = Chip-select n is present + DimmMirrorPresent UINT8 ? ; < For each bit n 0..7, 1 = DIMM n is OnDimmMirror capable + DimmSpdCse UINT8 ? ; < For each bit n 0..7, 1 = DIMM n SPD checksum error + DimmExclude UINT8 ? ; < For each bit n 0..7, 1 = DIMM n gets excluded + DimmYr06 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's year code <= 2006 + DimmWk2406 UINT8 ? ; < Bitmap indicating which Dimms have a manufacturer's week code <= 24 of 2006 (June) + DimmPlPresent UINT8 ? ; < Bitmap indicating that Planar (1) or Stacked (0) Dimms are present. + DimmQrPresent UINT8 ? ; < QuadRank DIMM present? + DimmDrPresent UINT8 ? ; < Bitmap indicating that Dual Rank Dimms are present + DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present + Dimmx4Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x4 data devices. where 4..7 are reserved. + Dimmx8Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x8 data devices. where 4..7 are reserved. + Dimmx16Present UINT8 ? ; < For each bit n 0..3, 1 = DIMM n contains x16 data devices. where 4..7 are reserved. + LrdimmPhysicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of Physical Ranks for LRDIMMs + LrDimmLogicalRanks UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Number of LRDIMM Logical ranks in this configuration + LrDimmRankMult UINT8 (MAX_DIMMS_PER_CHANNEL) DUP (?) ; < Rank Multipication factor per dimm. + + MemClkDisMap POINTER ? ; < This pointer will be set to point to an array that describes + ; < the routing of M[B,A]_CLK pins to the DIMMs' ranks. AGESA will + ; < base on this array to disable unused MemClk to save power. + ; < + ; < The array must have 8 entries. Each entry, which associates with + ; < one MemClkDis bit, is a bitmap of 8 CS that that MemClk is routed to. + ; < Example: + ; < BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package + ; < is like below: + ; < Bit AM3/S1g3 pin name + ; < 0 M[B,A]_CLK_H/L[0] + ; < 1 M[B,A]_CLK_H/L[1] + ; < 2 M[B,A]_CLK_H/L[2] + ; < 3 M[B,A]_CLK_H/L[3] + ; < 4 M[B,A]_CLK_H/L[4] + ; < 5 M[B,A]_CLK_H/L[5] + ; < 6 M[B,A]_CLK_H/L[6] + ; < 7 M[B,A]_CLK_H/L[7] + ; < And platform has the following routing: + ; < CS0 M[B,A]_CLK_H/L[4] + ; < CS1 M[B,A]_CLK_H/L[2] + ; < CS2 M[B,A]_CLK_H/L[3] + ; < CS3 M[B,A]_CLK_H/L[5] + ; < Then MemClkDisMap should be pointed to the following array: + ; < CLK_2 CLK_3 CLK_4 CLK_5 + ; < 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00 + ; < Each entry of the array is the bitmask of 8 chip selects. + + CKETriMap POINTER ? ; < This pointer will be set to point to an array that describes + ; < the routing of CKE pins to the DIMMs' ranks. + ; < The array must have 2 entries. Each entry, which associates with + ; < one CKE pin, is a bitmap of 8 CS that that CKE is routed to. + ; < AGESA will base on this array to disable unused CKE pins to save power. + + ODTTriMap POINTER ? ; < This pointer will be set to point to an array that describes + ; < the routing of ODT pins to the DIMMs' ranks. + ; < The array must have 4 entries. Each entry, which associates with + ; < one ODT pin, is a bitmap of 8 CS that that ODT is routed to. + ; < AGESA will base on this array to disable unused ODT pins to save power. + + ChipSelTriMap POINTER ? ; < This pointer will be set to point to an array that describes + ; < the routing of chip select pins to the DIMMs' ranks. + ; < The array must have 8 entries. Each entry is a bitmap of 8 CS. + ; < AGESA will base on this array to disable unused Chip select pins to save power. + + ExtendTmp BOOLEAN ? ; < If extended temperature is supported on all dimms on a channel. + + Reserved UINT8 (100) DUP (?) ; < Reserved +CH_DEF_STRUCT ENDS + +; =============================================================================== + ; DCT Channel Timing Parameters + ; This data structure sets timings that are specific to the channel +; =============================================================================== +CH_TIMING_STRUCT STRUCT + DctDimmValid UINT16 ? ; < For each bit n 0..3, 1=DIMM n is valid and is/will be configured where 4..7 are reserved. + DimmMirrorPresent UINT16 ? ; < For each bit n 0..3, 1=DIMM n is OnDimmMirror capable where 4..7 are reserved. + DimmSpdCse UINT16 ? ; < For each bit n 0..3, 1=DIMM n SPD checksum error where 4..7 are reserved. + DimmExclude UINT16 ? ; < For each bit n 0..3, 1 = DIMM n gets excluded because of no common voltage is found + CsPresent UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present + CsEnabled UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is enabled + CsTestFail UINT16 ? ; < For each bit n 0..7, 1=Chip-select n is present but disabled + CsTrainFail UINT16 ? ; < Bitmap showing which chipselects failed training + DIMM1KPage UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains 1K page devices. where 4..7 are reserved. + DimmQrPresent UINT16 ? ; < QuadRank DIMM present? + DimmDrPresent UINT16 ? ; < Bitmap indicating that Dual Rank Dimms are present + DimmSRPresent UINT8 ? ; < Bitmap indicating that Single Rank Dimms are present + Dimmx4Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x4 data devices. where 4..7 are reserved. + Dimmx8Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x8 data devices. where 4..7 are reserved. + Dimmx16Present UINT16 ? ; < For each bit n 0..3, 1=DIMM n contains x16 data devices. where 4..7 are reserved. + + DIMMTrcd UINT16 ? ; < Minimax Trcd*40 (ns) of DIMMs + DIMMTrp UINT16 ? ; < Minimax Trp*40 (ns) of DIMMs + DIMMTrtp UINT16 ? ; < Minimax Trtp*40 (ns) of DIMMs + DIMMTras UINT16 ? ; < Minimax Tras*40 (ns) of DIMMs + DIMMTrc UINT16 ? ; < Minimax Trc*40 (ns) of DIMMs + DIMMTwr UINT16 ? ; < Minimax Twr*40 (ns) of DIMMs + DIMMTrrd UINT16 ? ; < Minimax Trrd*40 (ns) of DIMMs + DIMMTwtr UINT16 ? ; < Minimax Twtr*40 (ns) of DIMMs + DIMMTfaw UINT16 ? ; < Minimax Tfaw*40 (ns) of DIMMs + TargetSpeed UINT16 ? ; < Target DRAM bus speed in MHz + Speed UINT16 ? ; < DRAM bus speed in MHz + ; < 400 (MHz) + ; < 533 (MHz) + ; < 667 (MHz) + ; < 800 (MHz) + ; < and so on... + CasL UINT8 ? ; < CAS latency DCT setting (busclocks) + Trcd UINT8 ? ; < DCT Trcd (busclocks) + Trp UINT8 ? ; < DCT Trp (busclocks) + Trtp UINT8 ? ; < DCT Trtp (busclocks) + Tras UINT8 ? ; < DCT Tras (busclocks) + Trc UINT8 ? ; < DCT Trc (busclocks) + Twr UINT8 ? ; < DCT Twr (busclocks) + Trrd UINT8 ? ; < DCT Trrd (busclocks) + Twtr UINT8 ? ; < DCT Twtr (busclocks) + Tfaw UINT8 ? ; < DCT Tfaw (busclocks) + Trfc0 UINT8 ? ; < DCT Logical DIMM0 Trfc + ; < 0 = 75ns (for 256Mb devs) + ; < 1 = 105ns (for 512Mb devs) + ; < 2 = 127.5ns (for 1Gb devs) + ; < 3 = 195ns (for 2Gb devs) + ; < 4 = 327.5ns (for 4Gb devs) + Trfc1 UINT8 ? ; < DCT Logical DIMM1 Trfc (see Trfc0 for format) + Trfc2 UINT8 ? ; < DCT Logical DIMM2 Trfc (see Trfc0 for format) + Trfc3 UINT8 ? ; < DCT Logical DIMM3 Trfc (see Trfc0 for format) + DctMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by this DCT. + SlowMode BOOLEAN ? ; < 1T or 2T CMD mode (slow access mode) + ; < FALSE = 1T + ; < TRUE = 2T + TrwtTO UINT8 ? ; < DCT TrwtTO (busclocks) + Twrrd UINT8 ? ; < DCT Twrrd (busclocks) + Twrwr UINT8 ? ; < DCT Twrwr (busclocks) + Trdrd UINT8 ? ; < DCT Trdrd (busclocks) + TrwtWB UINT8 ? ; < DCT TrwtWB (busclocks) + TrdrdSD UINT8 ? ; < DCT TrdrdSD (busclocks) + TwrwrSD UINT8 ? ; < DCT TwrwrSD (busclocks) + TwrrdSD UINT8 ? ; < DCT TwrrdSD (busclocks) + MaxRdLat UINT16 ? ; < Max Read Latency + WrDatGrossH UINT8 ? ; < Temporary variables must be removed + DqsRcvEnGrossL UINT8 ? ; < Temporary variables must be removed +CH_TIMING_STRUCT ENDS + +; =============================================================================== + ; Data for each DCT + ; This data structure defines data used to configure each DRAM controller +; =============================================================================== +DCT_STRUCT STRUCT + Dct UINT8 ? ; < Current Dct + Timings CH_TIMING_STRUCT {} ; < Channel Timing structure + ChData POINTER ? ; < Pointed to a dynamically allocated array of Channel structures + ChannelCount UINT8 ? ; < Number of channel per this DCT +DCT_STRUCT ENDS + + +; =============================================================================== + ; Data Structure defining each Die + ; This data structure contains information that is used to configure each Die +; =============================================================================== +DIE_STRUCT STRUCT + + ; Advanced: + + NodeId UINT8 ? ; < Node ID of current controller + SocketId UINT8 ? ; < Socket ID of this Die + DieId UINT8 ? ; < ID of this die relative to the socket + PciAddr PCI_ADDR {} ; < Pci bus and device number of this controller. + ErrCode AGESA_STATUS ? ; < Current error condition of Node + ; < 0x0 = AGESA_SUCCESS + ; < 0x1 = AGESA_UNSUPPORTED + ; < 0x2 = AGESA_BOUNDS_CHK + ; < 0x3 = AGESA_ALERT + ; < 0x4 = AGESA_WARNING + ; < 0x5 = AGESA_ERROR + ; < 0x6 = AGESA_CRITICAL + ; < 0x7 = AGESA_FATAL + ; < + ErrStatus BOOLEAN (EsbEOL) DUP (?) ; < Error Status bit Field + Status BOOLEAN (SbEOL) DUP (?) ; < Status bit Field + NodeMemSize UINT32 ? ; < Base[47:16], total DRAM size controlled by both DCT0 and DCT1 of this Node. + NodeSysBase UINT32 ? ; < Base[47:16] (system address) DRAM base address of this Node. + NodeHoleBase UINT32 ? ; < If not zero, Base[47:16] (system address) of dram hole for HW remapping. Dram hole exists on this Node + NodeSysLimit UINT32 ? ; < Base[47:16] (system address) DRAM limit address of this Node. + DimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is present. + ; < DIMM# Select Signal + ; < 0 MA0_CS_L[0, 1] + ; < 1 MB0_CS_L[0, 1] + ; < 2 MA1_CS_L[0, 1] + ; < 3 MB1_CS_L[0, 1] + ; < 4 MA2_CS_L[0, 1] + ; < 5 MB2_CS_L[0, 1] + ; < 6 MA3_CS_L[0, 1] + ; < 7 MB3_CS_L[0, 1] + DimmValid UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is valid and is / will be configured + RegDimmPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is registered DIMM + LrDimmPresent UINT32 ? ; < For each bit n 0..3, 1 = DIMM n is Load Reduced DIMM where 4..7 are reserved. + DimmEccPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ECC capable. + DimmParPresent UINT32 ? ; < For each bit n 0..7, 1 = DIMM n is ADR/CMD Parity capable. + DimmTrainFail UINT16 ? ; < Bitmap showing which dimms failed training + ChannelTrainFail UINT16 ? ; < Bitmap showing the channel information about failed Chip Selects + ; < 0 in any bit field indicates Channel 0 + ; < 1 in any bit field indicates Channel 1 + Dct UINT8 ? ; < Need to be removed + ; < DCT pointer + GangedMode BOOLEAN ? ; < Ganged mode + ; < 0 = disabled + ; < 1 = enabled + LogicalCpuid CPU_LOGICAL_ID {} ; < The logical CPUID of the node + HostBiosSrvc1 UINT16 ? ; < UINT16 sized general purpose field for use by host BIOS. Scratch space. + HostBiosSrvc2 UINT32 ? ; < UINT32 sized general purpose field for use by host BIOS. Scratch space. + MLoad UINT8 ? ; < Need to be removed + ; < Number of devices loading MAA bus + MaxAsyncLat UINT8 ? ; < Legacy wrapper + ChbD3Rcvrdly UINT8 ? ; < Legacy wrapper + ChaMaxRdLat UINT16 ? ; < Max Read Latency (ns) for DCT 0 + ChbD3BcRcvrdly UINT8 ? ; < CHB DIMM 3 Check UINT8 Receiver Enable Delay + + DctData POINTER ? ; < Pointed to a dynamically allocated array of DCT_STRUCTs + DctCount UINT8 ? ; < Number of DCTs per this Die + Reserved UINT8 (16) DUP (?) ; < Reserved +DIE_STRUCT ENDS + +; ********************************************************************* +; * S3 Support structure +; ********************************************************************* + ; AmdInitResume, AmdS3LateRestore, and AmdS3Save param structure +AMD_S3_PARAMS STRUCT + Signature UINT32 ? ; < "ASTR" for AMD Suspend-To-RAM + Version UINT16 ? ; < S3 Params version number + Flags UINT32 ? ; < Indicates operation + NvStorage POINTER ? ; < Pointer to memory critical save state data + NvStorageSize UINT32 ? ; < Size in bytes of the NvStorage region + VolatileStorage POINTER ? ; < Pointer to remaining AMD save state data + VolatileStorageSize UINT32 ? ; < Size in bytes of the VolatileStorage region +AMD_S3_PARAMS ENDS + +; =============================================================================== + ; MEM_PARAMETER_STRUCT + ; This data structure is used to pass wrapper parameters to the memory configuration code +; =============================================================================== +MEM_PARAMETER_STRUCT STRUCT + + ; Basic (Return parameters) + ; (This section contains the outbound parameters from the memory init code) + + GStatus BOOLEAN (GsbEOL) DUP (?) ; < Global Status bitfield + HoleBase UINT32 ? ; < If not zero Base[47:16] (system address) of sub 4GB dram hole for HW remapping. + Sub4GCacheTop UINT32 ? ; < If not zero, the 32-bit top of cacheable memory. + SysLimit UINT32 ? ; < Limit[47:16] (system address) + DDR3Voltage DIMM_VOLTAGE ? ; < Find support voltage and send back to platform BIOS. + ; < 0 = 1.5v + ; < 1 = 1.35v + ; < 2 = 1.2v + ; < 0xFF = Mixed 1.5V and 1.2V in the system. 1.5V dimms get excluded + ; < from the system. + ; < + + MemData POINTER ? ; < Pointer to MEM_DATA_STRUCT + ; Advanced (Optional parameters) + ; Optional (all defaults values will be initialized by the + ; 'AmdMemInitDataStructDef' based on AMD defaults. It is up + ; to the IBV/OEM to change the defaults after initialization + ; but prior to the main entry to the memory code): + + ; Memory Map/Mgt. + + BottomIo UINT16 ? ; < Bottom of 32-bit IO space (8-bits) + ; < NV_BOTTOM_IO[7:0]=Addr[31:24] + MemHoleRemapping BOOLEAN ? ; < Memory Hole Remapping (1-bit) + ; < FALSE = disable + ; < TRUE = enable + + + ; Dram Timing + + UserTimingMode USER_MEMORY_TIMING_MODE ? ; < User Memclock Mode + + MemClockValue MEMORY_BUS_SPEED ? ; < Memory Clock Value + + ; Dram Configuration + + EnableBankIntlv BOOLEAN ? ; < Dram Bank (chip-select) Interleaving (1-bit) + ; < FALSE =disable (AMD default) + ; < TRUE =enable + EnableNodeIntlv BOOLEAN ? ; < Node Memory Interleaving (1-bit) + ; < FALSE = disable (AMD default) + ; < TRUE = enable + EnableChannelIntlv BOOLEAN ? ; < Channel Interleaving (1-bit) + ; < FALSE = disable (AMD default) + ; < TRUE = enable + ; ECC + + EnableEccFeature BOOLEAN ? ; < enable ECC error to go into MCE + ; < FALSE = disable (AMD default) + ; < TRUE = enable + ; Dram Power + + EnablePowerDown BOOLEAN ? ; < CKE based power down mode (1-bit) + ; < FALSE =disable (AMD default) + ; < TRUE =enable + ; Online Spare + + EnableOnLineSpareCtl BOOLEAN ? ; < Chip Select Spare Control bit 0: + ; < FALSE = disable Spare (AMD default) + ; < TRUE = enable Spare + TableBasedAlterations POINTER ? ; < Point to an array of data bytes describing desired modifications to register settings. + + PlatformMemoryConfiguration POINTER ? + ; < Points to a table that contains platform specific settings + ; < (i.e. MemClk routing, the number of DIMM slots per channel,...) + ; < AGESA initializes this pointer with DefaultPlatformMemoryConfiguration that + ; < contains default conservative settings. Platform BIOS can either tweak + ; < DefaultPlatformMemoryConfiguration or reassign this pointer to its own table. + ; < + EnableParity BOOLEAN ? ; < Parity control + ; < TRUE = enable + ; < FALSE = disable (AMD default) + EnableBankSwizzle BOOLEAN ? ; < BankSwizzle control + ; < FALSE = disable + ; < TRUE = enable (AMD default) + EnableMemClr BOOLEAN ? ; < Memory Clear functionality control + ; < FALSE = disable + ; < TRUE = enable (AMD default) + ; Uma Configuration + + UmaMode UMA_MODE ? ; < Uma Mode + ; < 0 = None + ; < 1 = Specified + ; < 2 = Auto + UmaSize UINT32 ? ; < The size of shared graphics dram (16-bits) + ; < NV_UMA_Size[31:0]=Addr[47:16] + ; < + UmaBase UINT32 ? ; < The allocated Uma base address (32-bits) + ; < NV_UMA_Base[31:0]=Addr[47:16] + ; < + + ; Memory Restore Feature + + MemRestoreCtl BOOLEAN ? ; < Memory context restore control + ; < FALSE = perform memory init as normal (AMD default) + ; < TRUE = restore memory context and skip training. This requires + ; < MemContext is valid before AmdInitPost + SaveMemContextCtl BOOLEAN ? ; < Control switch to save memory context at the end of MemAuto + ; < TRUE = AGESA will setup MemContext block before exit AmdInitPost + ; < FALSE = AGESA will not setup MemContext block. Platform is + ; < expected to call S3Save later in POST if it wants to + ; < use memory context restore feature. + MemContext AMD_S3_PARAMS {} ; < Memory context block describes the data that platform needs to + ; < save and restore for memory context restore feature to work. + ; < It uses the subset of S3Save block to save/restore. Hence platform + ; < may save only S3 block and uses it for both S3 resume and + ; < memory context restore. + ; < - If MemRestoreCtl is TRUE, platform needs to pass in MemContext + ; < before AmdInitPost. + ; < - If SaveMemContextCtl is TRUE, platform needs to save MemContext + ; < right after AmdInitPost. +MEM_PARAMETER_STRUCT ENDS + + +; =============================================================================== + ; Function definition + ; This data structure passes function pointers to the memory configuration code. + ; The wrapper can use this structure with customized versions +; ================================================================================ +MEM_FUNCTION_STRUCT STRUCT + + ; PUBLIC required Internal functions + + amdMemGetPsCfgU POINTER ? ; < Proc for Unbuffered DIMMs, platform specific + amdMemGetPsCfgR POINTER ? ; < Proc for Registered DIMMs, platform specific + + ; PUBLIC optional functions + + amdMemEccInit POINTER ? ; < NB proc for ECC feature + amdMemChipSelectInterleaveInit POINTER ? ; < NB proc for CS interleave feature + amdMemDctInterleavingInit POINTER ? ; < NB proc for Channel interleave feature + amdMemMctInterleavingInit POINTER ? ; < NB proc for Node interleave feature + amdMemParallelTraining POINTER ? ; < NB proc for parallel training feature + amdMemEarlySampleSupport POINTER ? ; < NB code for early sample support feature + amdMemMultiPartInitSupport POINTER ? ; < NB code for 'multi-part' + amdMemOnlineSpareSupport POINTER ? ; < NB code for On-Line Spare feature + amdMemUDimmInit POINTER ? ; < NB code for UDIMMs + amdMemRDimmInit POINTER ? ; < NB code for RDIMMs + amdMemLrDimmInit POINTER ? ; < NB code for LRDIMMs + + Reserved UINT32 (100) DUP (?) ; < Reserved for later function definition +MEM_FUNCTION_STRUCT ENDS + +; =============================================================================== + ; Socket Structure + +; =============================================================================== +MEM_SOCKET_STRUCT STRUCT + ChannelPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels training data + + TimingsPtr POINTER (MAX_CHANNELS_PER_SOCKET) DUP (?) ; < Pointers to each channels timing data + +MEM_SOCKET_STRUCT ENDS + +; =============================================================================== + ; MEM_DATA_STRUCT +; =============================================================================== +MEM_DATA_STRUCT STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < AGESA Standard Header + + ParameterListPtr POINTER ? ; < List of input Parameters + + FunctionList MEM_FUNCTION_STRUCT {} ; < List of function Pointers + + GetPlatformCfg POINTER (MAX_PLATFORM_TYPES) DUP (?) ; < look-up platform info + + ErrorHandling POINTER ? ; < Error Handling + + ; SocketList is a shortcut for IBVs to retrieve training + ; and timing data for each channel indexed by socket/channel, + ; eliminating their need to parse die/dct/channel etc. + ; It contains pointers to the populated data structures for + ; each channel and skips the channel structures that are + ; unpopulated. In the case of channels sharing the same DCT, + ; the pTimings pointers will point to the same DCT Timing data. + + SocketList MEM_SOCKET_STRUCT (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Socket list for memory code + + DiesPerSystem POINTER ? ; < Pointed to an array of DIE_STRUCTs + DieCount UINT8 ? ; < Number of MCTs in the system. + + SpdDataStructure POINTER ? ; < Pointer to SPD Data structure + + PlatFormConfig POINTER ? ; < Pointer to Platform profile/build option config structure + + IsFlowControlSupported BOOLEAN ? ; < Indicates if flow control is supported + + TscRate UINT32 ? ; < The rate at which the TSC increments in megahertz. + +MEM_DATA_STRUCT ENDS + +; =============================================================================== +; UMA_INFO_STRUCT +; =============================================================================== +UMA_INFO STRUCT + UmaBase UINT64 ? ; < UmaBase[63:0] = Addr[63:0] + UmaSize UINT32 ? ; < UmaSize[31:0] = Addr[31:0] + UmaAttributes UINT32 ? ; < Indicate the attribute of Uma + UmaMode UINT8 ? ; < Indicate the mode of Uma + MemClock UINT16 ? ; < Indicate memory running speed in MHz + Reserved UINT8 (3) DUP (?) ; < Reserved for future usage +UMA_INFO ENDS + + ; AGESA MEMORY ERRORS + + ; AGESA_ALERT Memory Errors +MEM_ALERT_USER_TMG_MODE_OVERRULED EQU 04010000h ; < TIMING_MODE_SPECIFIC is requested but + ; < cannot be applied to current configurations. +MEM_ALERT_ORG_MISMATCH_DIMM EQU 04010100h ; < DIMM organization miss-match +MEM_ALERT_BK_INT_DIS EQU 04010200h ; < Bank interleaving disable for internal issue + + ; AGESA_ERROR Memory Errors +MEM_ERROR_NO_DQS_POS_RD_WINDOW EQU 04010300h ; < No DQS Position window for RD DQS +MEM_ERROR_SMALL_DQS_POS_RD_WINDOW EQU 04020300h ; < Small DQS Position window for RD DQS +MEM_ERROR_NO_DQS_POS_WR_WINDOW EQU 04030300h ; < No DQS Position window for WR DQS +MEM_ERROR_SMALL_DQS_POS_WR_WINDOW EQU 04040300h ; < Small DQS Position window for WR DQS +MEM_ERROR_ECC_DIS EQU 04010400h ; < ECC has been disabled as a result of an internal issue +MEM_ERROR_DIMM_SPARING_NOT_ENABLED EQU 04010500h ; < DIMM sparing has not been enabled for an internal issues +MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE EQU 04050300h ; < Receive Enable value is too large +MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW EQU 04060300h ; < There is no DQS receiver enable window +MEM_ERROR_DRAM_ENABLED_TIME_OUT EQU 04010600h ; < Time out when polling DramEnabled bit +MEM_ERROR_DCT_ACCESS_DONE_TIME_OUT EQU 04010700h ; < Time out when polling DctAccessDone bit +MEM_ERROR_SEND_CTRL_WORD_TIME_OUT EQU 04010800h ; < Time out when polling SendCtrlWord bit +MEM_ERROR_PREF_DRAM_TRAIN_MODE_TIME_OUT EQU 04010900h ; < Time out when polling PrefDramTrainMode bit +MEM_ERROR_ENTER_SELF_REF_TIME_OUT EQU 04010A00h ; < Time out when polling EnterSelfRef bit +MEM_ERROR_FREQ_CHG_IN_PROG_TIME_OUT EQU 04010B00h ; < Time out when polling FreqChgInProg bit +MEM_ERROR_EXIT_SELF_REF_TIME_OUT EQU 04020A00h ; < Time out when polling ExitSelfRef bit +MEM_ERROR_SEND_MRS_CMD_TIME_OUT EQU 04010C00h ; < Time out when polling SendMrsCmd bit +MEM_ERROR_SEND_ZQ_CMD_TIME_OUT EQU 04010D00h ; < Time out when polling SendZQCmd bit +MEM_ERROR_DCT_EXTRA_ACCESS_DONE_TIME_OUT EQU 04010E00h ; < Time out when polling DctExtraAccessDone bit +MEM_ERROR_MEM_CLR_BUSY_TIME_OUT EQU 04010F00h ; < Time out when polling MemClrBusy bit +MEM_ERROR_MEM_CLEARED_TIME_OUT EQU 04020F00h ; < Time out when polling MemCleared bit +MEM_ERROR_FLUSH_WR_TIME_OUT EQU 04011000h ; < Time out when polling FlushWr bit +MEM_ERROR_MAX_LAT_NO_WINDOW EQU 04070300h ; < Fail to find pass during Max Rd Latency training +MEM_ERROR_PARALLEL_TRAINING_LAUNCH_FAIL EQU 04080300h ; < Fail to launch training code on an AP +MEM_ERROR_PARALLEL_TRAINING_TIME_OUT EQU 04090300h ; < Fail to finish parallel training +MEM_ERROR_NO_ADDRESS_MAPPING EQU 04011100h ; < No address mapping found for a dimm +MEM_ERROR_RCVR_EN_NO_PASSING_WINDOW_EQUAL_LIMIT EQU 040A0300h ; < There is no DQS receiver enable window and the value is equal to the largest value +MEM_ERROR_RCVR_EN_VALUE_TOO_LARGE_LIMIT_LESS_ONE EQU 040B0300h ; < Receive Enable value is too large and is 1 less than limit +MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR EQU 04011200h ; < SPD Checksum error for NV_SPDCHK_RESTRT +MEM_ERROR_NO_CHIPSELECT EQU 04011300h ; < No chipselects found +MEM_ERROR_UNSUPPORTED_333MHZ_UDIMM EQU 04011500h ; < Unbuffered dimm is not supported at 333MHz +MEM_ERROR_WL_PRE_OUT_OF_RANGE EQU 040C0300h ; < Returned PRE value during write levelization was out of range + + ; AGESA_WARNING Memory Errors + MEM_WARNING_UNSUPPORTED_QRDIMM EQU 04011600h ; < QR DIMMs detected but not supported + MEM_WARNING_UNSUPPORTED_UDIMM EQU 04021600h ; < U DIMMs detected but not supported + MEM_WARNING_UNSUPPORTED_SODIMM EQU 04031600h ; < SO-DIMMs detected but not supported + MEM_WARNING_UNSUPPORTED_X4DIMM EQU 04041600h ; < x4 DIMMs detected but not supported + MEM_WARNING_UNSUPPORTED_RDIMM EQU 04051600h ; < R DIMMs detected but not supported + MEM_WARNING_UNSUPPORTED_LRDIMM EQU 04061600h ; < LR DIMMs detected but not supported + + MEM_WARNING_EMP_NOT_SUPPORTED EQU 04011700h ; < Processor is not capable for EMP + MEM_WARNING_EMP_CONFLICT EQU 04021700h ; < EMP cannot be enabled if channel interleaving, + ; < bank interleaving, or bank swizzle is enabled. + MEM_WARNING_EMP_NOT_ENABLED EQU 04031700h ; < Memory size is not power of two. + MEM_WARNING_PERFORMANCE_ENABLED_BATTERY_LIFE_PREFERRED EQU 04011800h ; < Performance has been enabled, but battery life is preferred. + MEM_WARNING_NO_SPDTRC_FOUND EQU 04011900h ; < No Trc timing value found in SPD of a dimm. + MEM_WARNING_NODE_INTERLEAVING_NOT_ENABLED EQU 04012000h ; < Node Interleaveing Requested, but could not be enabled + MEM_WARNING_CHANNEL_INTERLEAVING_NOT_ENABLED EQU 04012100h ; < Channel Interleaveing Requested, but could not be enabled + MEM_WARNING_BANK_INTERLEAVING_NOT_ENABLED EQU 04012200h ; < Bank Interleaveing Requested, but could not be enabled + MEM_WARNING_VOLTAGE_1_35_NOT_SUPPORTED EQU 04012300h ; < Voltage 1.35 determined, but could not be supported + + ; AGESA_FATAL Memory Errors + MEM_ERROR_MINIMUM_MODE EQU 04011A00h ; < Running in minimum mode + MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM EQU 04011B00h ; < DIMM modules are miss-matched + MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM EQU 04011C00h ; < No DIMMs have been found on system + MEM_ERROR_MISMATCH_DIMM_CLOCKS EQU 04011D00h ; < DIMM clocks miss-matched + MEM_ERROR_NO_CYC_TIME EQU 04011E00h ; < No cycle time found + MEM_ERROR_HEAP_ALLOCATE_DYN_STORING_OF_TRAINED_TIMINGS EQU 04011F00h ; < Heap allocation error with dynamic storing of trained timings + MEM_ERROR_HEAP_ALLOCATE_FOR_DCT_STRUCT_AND_CH_DEF_STRUCTs EQU 04021F00h ; < Heap allocation error for DCT_STRUCT and CH_DEF_STRUCT + MEM_ERROR_HEAP_ALLOCATE_FOR_REMOTE_TRAINING_ENV EQU 04031F00h ; < Heap allocation error with REMOTE_TRAINING_ENV + MEM_ERROR_HEAP_ALLOCATE_FOR_SPD EQU 04041F00h ; < Heap allocation error for SPD data + MEM_ERROR_HEAP_ALLOCATE_FOR_RECEIVED_DATA EQU 04051F00h ; < Heap allocation error for RECEIVED_DATA during parallel training + MEM_ERROR_HEAP_ALLOCATE_FOR_S3_SPECIAL_CASE_REGISTERS EQU 04061F00h ; < Heap allocation error for S3 "SPECIAL_CASE_REGISTER" + MEM_ERROR_HEAP_ALLOCATE_FOR_TRAINING_DATA EQU 04071F00h ; < Heap allocation error for Training Data + MEM_ERROR_HEAP_ALLOCATE_FOR_IDENTIFY_DIMM_MEM_NB_BLOCK EQU 04081F00h ; < Heap allocation error for DIMM Identify "MEM_NB_BLOCK + MEM_ERROR_NO_CONSTRUCTOR_FOR_IDENTIFY_DIMM EQU 04022300h ; < No Constructor for DIMM Identify + + + ; AGESA_CRITICAL Memory Errors + MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR3 EQU 04091F00h ; < Heap allocation error for DMI table for DDR3 + MEM_ERROR_HEAP_ALLOCATE_FOR_DMI_TABLE_DDR2 EQU 040A1F00h ; < Heap allocation error for DMI table for DDR2 + MEM_ERROR_UNSUPPORTED_DIMM_CONFIG EQU 04011400h ; < Dimm population is not supported + + +; ---------------------------------------------------------------------------- +; * +; * END OF MEMORY-SPECIFIC DATA STRUCTURES +; * +; *---------------------------------------------------------------------------- +; + + +; ---------------------------------------------------------------------------- +; * +; * CPU RELATED DEFINITIONS +; * +; *---------------------------------------------------------------------------- +; + +; CPU Event definitions. + +; Defines used to filter CPU events based on functional blocks +CPU_EVENT_PM_EVENT_MASK EQU 0FF00FF00h +CPU_EVENT_PM_EVENT_CLASS EQU 008000400h + +;================================================================ +; CPU General events +; Heap allocation (AppFunction = 01h) +CPU_ERROR_HEAP_BUFFER_IS_NOT_PRESENT EQU 008000100h +CPU_ERROR_HEAP_IS_ALREADY_INITIALIZED EQU 008010100h +CPU_ERROR_HEAP_IS_FULL EQU 008020100h +CPU_ERROR_HEAP_BUFFER_HANDLE_IS_ALREADY_USED EQU 008030100h +CPU_ERROR_HEAP_BUFFER_HANDLE_IS_NOT_PRESENT EQU 008040100h +; BrandId (AppFunction = 02h) +CPU_ERROR_BRANDID_HEAP_NOT_AVAILABLE EQU 008000200h +; Micro code patch (AppFunction = 03h) +CPU_ERROR_MICRO_CODE_PATCH_IS_NOT_LOADED EQU 008000300h +; Power management (AppFunction = 04h) +CPU_EVENT_PM_PSTATE_OVERCURRENT EQU 008000400h +CPU_EVENT_PM_ALL_PSTATE_OVERCURRENT EQU 008010400h +CPU_ERROR_PSTATE_HEAP_NOT_AVAILABLE EQU 008020400h +CPU_ERROR_PM_NB_PSTATE_MISMATCH EQU 008030400h +; BIST (AppFunction = 05h) +CPU_EVENT_BIST_ERROR EQU 008000500h +;================================================================= +; CPU Feature events +; Execution cache (AppFunction = 21h) +; AGESA_CACHE_SIZE_REDUCED 2101 +; AGESA_CACHE_REGIONS_ACROSS_1MB 2102 +; AGESA_CACHE_REGIONS_ACROSS_4GB 2103 +; AGESA_REGION_NOT_ALIGNED_ON_BOUNDARY 2104 +; AGESA_CACHE_START_ADDRESS_LESS_D0000 2105 +; AGESA_THREE_CACHE_REGIONS_ABOVE_1MB 2106 +; AGESA_DEALLOCATE_CACHE_REGIONS 2107 +CPU_EVENT_EXECUTION_CACHE_ALLOCATION_ERROR EQU 008002100h +; Core Leveling (AppFunction = 22h) +CPU_WARNING_ADJUSTED_LEVELING_MODE EQU 008002200h +; HT Assist (AppFunction = 23h) +CPU_WARNING_NONOPTIMAL_HT_ASSIST_CFG EQU 008002300h + +; CPU Build Configuration structures and definitions + +; Build Configuration values for BLDGCFG_AP_MTRR_SETTINGS +AP_MTRR_SETTINGS STRUCT + MsrAddr UINT32 ? ; < Fixed-Sized MTRR address + MsrData UINT64 ? ; < MTRR Settings +AP_MTRR_SETTINGS ENDS + +AMD_AP_MTRR_FIX64k_00000 EQU 000000250h +AMD_AP_MTRR_FIX16k_80000 EQU 000000258h +AMD_AP_MTRR_FIX16k_A0000 EQU 000000259h +AMD_AP_MTRR_FIX4k_C0000 EQU 000000268h +AMD_AP_MTRR_FIX4k_C8000 EQU 000000269h +AMD_AP_MTRR_FIX4k_D0000 EQU 00000026Ah +AMD_AP_MTRR_FIX4k_D8000 EQU 00000026Bh +AMD_AP_MTRR_FIX4k_E0000 EQU 00000026Ch +AMD_AP_MTRR_FIX4k_E8000 EQU 00000026Dh +AMD_AP_MTRR_FIX4k_F0000 EQU 00000026Eh +AMD_AP_MTRR_FIX4k_F8000 EQU 00000026Fh +CPU_LIST_TERMINAL EQU 0FFFFFFFFh + +; *********************************************************************** +; * +; * AGESA interface Call-Out function parameter structures +; * +; ********************************************************************** + + ; Parameters structure for interface call-out AgesaAllocateBuffer +AGESA_BUFFER_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + BufferLength UINT32 ? ; < Size of buffer to allocate + BufferHandle UINT32 ? ; < Identifier or name for the buffer + BufferPointer POINTER ? ; < location of the created buffer +AGESA_BUFFER_PARAMS ENDS + + ; Parameters structure for interface call-out AgesaRunCodeOnAp +AP_EXE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + FunctionNumber UINT32 ? ; < Index of the procedure to execute + RelatedDataBlock POINTER ? ; < Location of data structure the procedure will use + RelatedBlockLength UINT32 ? ; < Size of the related data block +AP_EXE_PARAMS ENDS + + ; Parameters structure for the interface call-out AgesaReadSpd & AgesaReadSpdRecovery +AGESA_READ_SPD_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < standard header + SocketId UINT8 ? ; < Address of SPD - socket ID + MemChannelId UINT8 ? ; < Address of SPD - memory channel ID + DimmId UINT8 ? ; < Address of SPD - DIMM ID + Buffer POINTER ? ; < Location where to place the SPD content + MemData POINTER ? ; < Location of the MemData structure, for reference +AGESA_READ_SPD_PARAMS ENDS + + ; Buffer Handles + AMD_DMI_INFO_BUFFER_HANDLE EQU 000D000h ; < Assign 0x000D000 buffer handle to DMI function + AMD_PSTATE_DATA_BUFFER_HANDLE EQU 000D001h ; < Assign 0x000D001 buffer handle to Pstate data + AMD_PSTATE_ACPI_BUFFER_HANDLE EQU 000D002h ; < Assign 0x000D002 buffer handle to Pstate table + AMD_BRAND_ID_BUFFER_HANDLE EQU 000D003h ; < Assign 0x000D003 buffer handle to Brand ID + AMD_ACPI_SLIT_BUFFER_HANDLE EQU 000D004h ; < Assign 0x000D004 buffer handle to SLIT function + AMD_SRAT_INFO_BUFFER_HANDLE EQU 000D005h ; < Assign 0x000D005 buffer handle to SRAT function + AMD_WHEA_BUFFER_HANDLE EQU 000D006h ; < Assign 0x000D006 buffer handle to WHEA function + AMD_S3_INFO_BUFFER_HANDLE EQU 000D007h ; < Assign 0x000D007 buffer handle to S3 function + AMD_S3_NB_INFO_BUFFER_HANDLE EQU 000D008h ; < Assign 0x000D008 buffer handle to S3 NB device info + AMD_ACPI_ALIB_BUFFER_HANDLE EQU 000D009h ; < Assign 0x000D009 buffer handle to ALIB SSDT table +AMD_BUFFER_HANDLE TEXTEQU <DWORD> +; *********************************************************************** +; * +; * AGESA interface Call-Out function prototypes +; * +; ********************************************************************** + +; *********************************************************************** +; * +; * AGESA interface structure definition and function prototypes +; * +; ********************************************************************** + +; ********************************************************************* +; * Platform Configuration: The parameters in boot branch function +; ********************************************************************* + +; The possible platform control flow settings. + Nfcm EQU 0 ; < Normal Flow Control Mode. + UmaDr EQU 1 ; < UMA using Display Refresh flow control. + UmaIfcm EQU 2 ; < UMA using Isochronous Flow Control. + Ifcm EQU 3 ; < Isochronous Flow Control Mode (other than for UMA). + Iommu EQU 4 ; < An IOMMU is in use in the system. + MaxControlFlow EQU 5 ; < Not a control flow mode, use for limit checking. +PLATFORM_CONTROL_FLOW TEXTEQU <DWORD> + +; Platform Deemphasis Levels. + DeemphasisLevelNone EQU 0 ; < No Deemphasis. + DeemphasisLevelMinus3 EQU 1 ; < Minus 3 db deemphasis. + DeemphasisLevelMinus6 EQU 2 ; < Minus 6 db deemphasis. + DeemphasisLevelMinus8 EQU 3 ; < Minus 8 db deemphasis. + DeemphasisLevelMinus11 EQU 4 ; < Minus 11 db deemphasis. + DeemphasisLevelMinus11pre8 EQU 5 ; < Minus 11, Minus 8 precursor db deemphasis. + DcvLevelNone EQU 16 ; < No DCV Deemphasis. + DcvLevelMinus2 EQU 17 ; < Minus 2 db DCV deemphasis. + DcvLevelMinus3 EQU 18 ; < Minus 3 db DCV deemphasis. + DcvLevelMinus5 EQU 19 ; < Minus 5 db DCV deemphasis. + DcvLevelMinus6 EQU 20 ; < Minus 6 db DCV deemphasis. + DcvLevelMinus7 EQU 21 ; < Minus 7 db DCV deemphasis. + DcvLevelMinus8 EQU 22 ; < Minus 8 db DCV deemphasis. + DcvLevelMinus9 EQU 23 ; < Minus 9 db DCV deemphasis. + DcvLevelMinus11 EQU 24 ; < Minus 11 db DCV deemphasis. + MaxPlatformDeemphasisLevel EQU 25 ; < Not a deemphasis level, use for limit checking. +PLATFORM_DEEMPHASIS_LEVEL TEXTEQU <DWORD> + +; Provide Deemphasis Levels for HT Links. +; +; For each CPU to CPU or CPU to IO device HT link, the list of Deemphasis Levels will +; be checked for a match. The item matches for a Socket, Link if the link frequency is +; is in the inclusive range HighFreq:LoFreq. +; AGESA does not set deemphasis in IO devices, only in processors. + +CPU_HT_DEEMPHASIS_LEVEL STRUCT + ; Match fields + Socket UINT8 ? ; < One Socket on which this Link is located + Link UINT8 ? ; < The Link on this Processor. + LoFreq UINT8 ? ; < If the link is set to this frequency or greater, apply these levels, and + HighFreq UINT8 ? ; < If the link is set to this frequency or less, apply these levels. + ; Value fields + ReceiverDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The deemphasis level for this link + DcvDeemphasis PLATFORM_DEEMPHASIS_LEVEL ? ; < The DCV, or far transmitter deemphasis level. +CPU_HT_DEEMPHASIS_LEVEL ENDS + +; The possible platform power policy settings. + Performance EQU 0 ; < Optimize for performance. + BatteryLife EQU 1 ; < Optimize for battery life. + MaxPowerPolicy EQU 2 ; < Not a power policy mode, use for limit checking. +PLATFORM_POWER_POLICY TEXTEQU <DWORD> + +; Platform performance settings for optimized settings. +; Several configuration settings for the processor depend upon other parts and +; general designer choices for the system. The determination of these data points +; is not standard for all platforms, so the host environment needs to provide these +; to specify how the system is to be configured. +PERFORMANCE_PROFILE STRUCT + PlatformControlFlowMode PLATFORM_CONTROL_FLOW ? ; < The platform's control flow mode for optimum platform performance. + UseHtAssist BOOLEAN ? ; < HyperTransport link traffic optimization. + UseAtmMode BOOLEAN ? ; < HyperTransport link traffic optimization. + Use32ByteRefresh BOOLEAN ? ; < Display Refresh traffic generates 32 byte requests. + UseVariableMctIsocPriority BOOLEAN ? ; < The Memory controller will be set to Variable Isoc Priority. + PlatformPowerPolicy PLATFORM_POWER_POLICY ? ; < The platform's desired power policy +PERFORMANCE_PROFILE ENDS + +; Platform settings that describe the voltage regulator modules of the system. +; Many power management settings are dependent upon the characteristics of the +; on-board voltage regulator module (VRM). The host environment needs to provide +; these to specify how the system is to be configured. +PLATFORM_VRM_CONFIGURATION STRUCT + CurrentLimit UINT32 ? ; < Vrm Current Limit. + LowPowerThreshold UINT32 ? ; < Vrm Low Power Threshold. + SlewRate UINT32 ? ; < Vrm Slew Rate. + AdditionalDelay UINT32 ? ; < Vrm Additional Delay. + HiSpeedEnable BOOLEAN ? ; < Select high speed VRM. + InrushCurrentLimit UINT32 ? ; < Vrm Inrush Current Limit. +PLATFORM_VRM_CONFIGURATION ENDS + +; The VRM types to characterize. + CoreVrm EQU 0 ; < VDD plane. + NbVrm EQU 1 ; < VDDNB plane. + MaxVrmType EQU 2 ; < Not a valid VRM type, use for limit checking. +PLATFORM_VRM_TYPE TEXTEQU <DWORD> + +; Build Option/Configuration Boolean Structure +BUILD_OPT_CFG STRUCT + ; Build Option Area + VersionString AMD_CODE_HEADER {} ; < AMD embedded code version string + OptionUDimms BOOLEAN ? ; < UDIMMS + OptionRDimms BOOLEAN ? ; < RDIMMS + OptionLrDimms BOOLEAN ? ; < LRDIMMS + OptionEcc BOOLEAN ? ; < ECC + OptionBankInterleave BOOLEAN ? ; < BANK_INTERLEAVE + OptionDctInterleave BOOLEAN ? ; < DCT_INTERLEAVE + OptionNodeInterleave BOOLEAN ? ; < NODE_INTERLEAVE + OptionParallelTraining BOOLEAN ? ; < PARALLEL_TRAINING + OptionOnlineSpare BOOLEAN ? ; < ONLINE_SPARE + OptionMemRestore BOOLEAN ? ; < MEM CONTEXT RESTORE + OptionMultisocket BOOLEAN ? ; < MULTISOCKET + OptionAcpiPstates BOOLEAN ? ; < ACPI_PSTATES + OptionSrat BOOLEAN ? ; < SRAT + OptionSlit BOOLEAN ? ; < SLIT + OptionWhea BOOLEAN ? ; < WHEA + OptionDmi BOOLEAN ? ; < DMI + OptionEarlySamples BOOLEAN ? ; < EARLY_SAMPLES + OptionAddrToCsTranslator BOOLEAN ? ; < ADDR_TO_CS_TRANSLATOR + + ; Build Configuration Area + CfgPciMmioAddress UINT64 ? ; < PciMmioBase + CfgPciMmioSize UINT32 ? ; < PciMmioSize + CfgPlatVrmCfg PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. + CfgPlatNumIoApics UINT32 ? ; < PlatformApicIoNumber + CfgMemInitPstate UINT32 ? ; < MemoryInitPstate + CfgPlatformC1eMode PLATFORM_C1E_MODES ? ; < PlatformC1eMode + CfgPlatformC1eOpData UINT32 ? ; < PlatformC1eOpData + CfgPlatformC1eOpData1 UINT32 ? ; < PlatformC1eOpData1 + CfgPlatformC1eOpData2 UINT32 ? ; < PlatformC1eOpData2 + CfgPlatformCStateMode PLATFORM_CSTATE_MODES ? ; < PlatformCStateMode + CfgPlatformCStateOpData UINT32 ? ; < PlatformCStateOpData + CfgPlatformCStateIoBaseAddress UINT16 ? ; < PlatformCStateIoBaseAddress + CfgPlatformCpbMode PLATFORM_CPB_MODES ? ; < PlatformCpbMode + CfgCoreLevelingMode UINT32 ? ; < CoreLevelingCofig + CfgPerformanceProfile PERFORMANCE_PROFILE {} ; < The platform's control flow mode and platform performance settings. + CfgPlatformDeemphasisList POINTER ? ; < HT Deemphasis + CfgAmdPlatformType UINT32 ? ; < AmdPlatformType + CfgAmdPstateCapValue UINT32 ? ; < Amd pstate ceiling enabling deck + + CfgMemoryBusFrequencyLimit MEMORY_BUS_SPEED ? ; < Memory Bus Frequency Limit + CfgMemoryModeUnganged BOOLEAN ? ; < Memory Mode Unganged + CfgMemoryQuadRankCapable BOOLEAN ? ; < Memory Quad Rank Capable + CfgMemoryQuadrankType QUANDRANK_TYPE ? ; < Memory Quadrank Type + CfgMemoryRDimmCapable BOOLEAN ? ; < Memory RDIMM Capable + CfgMemoryLRDimmCapable BOOLEAN ? ; < Memory LRDIMM Capable + CfgMemoryUDimmCapable BOOLEAN ? ; < Memory UDIMM Capable + CfgMemorySODimmCapable BOOLEAN ? ; < Memory SODimm Capable + CfgMemoryEnableBankInterleaving BOOLEAN ? ; < Memory Enable Bank Interleaving + CfgMemoryEnableNodeInterleaving BOOLEAN ? ; < Memory Enable Node Interleaving + CfgMemoryChannelInterleaving BOOLEAN ? ; < Memory Channel Interleaving + CfgMemoryPowerDown BOOLEAN ? ; < Memory Power Down + CfgPowerDownMode POWER_DOWN_MODE ? ; < Power Down Mode + CfgOnlineSpare BOOLEAN ? ; < Online Spare + CfgMemoryParityEnable BOOLEAN ? ; < Memory Parity Enable + CfgBankSwizzle BOOLEAN ? ; < Bank Swizzle + CfgTimingModeSelect USER_MEMORY_TIMING_MODE ? ; < Timing Mode Select + CfgMemoryClockSelect MEMORY_BUS_SPEED ? ; < Memory Clock Select + CfgDqsTrainingControl BOOLEAN ? ; < Dqs Training Control + CfgIgnoreSpdChecksum BOOLEAN ? ; < Ignore Spd Checksum + CfgUseBurstMode BOOLEAN ? ; < Use Burst Mode + CfgMemoryAllClocksOn BOOLEAN ? ; < Memory All Clocks On + CfgEnableEccFeature BOOLEAN ? ; < Enable ECC Feature + CfgEccRedirection BOOLEAN ? ; < ECC Redirection + CfgScrubDramRate UINT16 ? ; < Scrub Dram Rate + CfgScrubL2Rate UINT16 ? ; < Scrub L2Rate + CfgScrubL3Rate UINT16 ? ; < Scrub L3Rate + CfgScrubIcRate UINT16 ? ; < Scrub Ic Rate + CfgScrubDcRate UINT16 ? ; < Scrub Dc Rate + CfgEccSyncFlood BOOLEAN ? ; < ECC Sync Flood + CfgEccSymbolSize UINT16 ? ; < ECC Symbol Size + CfgHeapDramAddress UINT64 ? ; < Heap contents will be temporarily stored in this address during the transition + CfgNodeMem1GBAlign BOOLEAN ? ; < Node Mem 1GB boundary Alignment + CfgS3LateRestore BOOLEAN ? ; < S3 Late Restore + CfgAcpiPstateIndependent BOOLEAN ? ; < PSD method dependent/Independent + CfgApMtrrSettingsList POINTER ? ; < The AP's MTRR settings before final halt + CfgUmaMode UMA_MODE ? ; < Uma Mode + CfgUmaSize UINT32 ? ; < Uma Size [31:0]=Addr[47:16] + CfgUmaAbove4G BOOLEAN ? ; < Uma Above 4G Support + CfgUmaAlignment UMA_ALIGNMENT ? ; < Uma alignment + CfgProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope + CfgProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. + CfgProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. + CfgGnbHdAudio UINT8 ? ; < Gnb HD Audio Enable + CfgAbmSupport UINT8 ? ; < ABM support + CfgDynamicRefreshRate UINT8 ? ; < Dynamic refresh rate + CfgLcdBackLightControl UINT16 ? ; < Lcd back light control + CfgGnb3dStereoPinIndex UINT8 ? ; < 3D Stereo Pin ID + CfgTempPcieMmioBaseAddress UINT32 ? ; < Temp pcie MMIO base address + CfgGnbIGPUSSID UINT32 ? ; < Gnb internal GPU SSID + CfgGnbHDAudioSSID UINT32 ? ; < Gnb HD Audio SSID + CfgGnbPcieSSID UINT32 ? ; < Gnb PCIe SSID + CfgLvdsSpreadSpectrum UINT16 ? ; < Lvds Spread Spectrum. Build-time customizable only + CfgLvdsSpreadSpectrumRate UINT16 ? ; < Lvds Spread Spectrum Rate. Build-time customizable only + Reserved BOOLEAN ? ; < reserved... +BUILD_OPT_CFG ENDS + + ; A structure containing platform specific operational characteristics. This + ; structure is initially populated by the initializer with a copy of the same + ; structure that was created at build time using the build configuration controls. +PLATFORM_CONFIGURATION STRUCT + PlatformProfile PERFORMANCE_PROFILE {} ; < Several configuration settings for the processor. + PlatformDeemphasisList POINTER ? ; < Deemphasis levels for the platform's HT links. + CoreLevelingMode UINT8 ? ; < Indicates how to balance the number of cores per processor. + C1eMode PLATFORM_C1E_MODES ? ; < Specifies the method of C1e enablement - Disabled, HW, or message based. + C1ePlatformData UINT32 ? ; < If C1eMode is HW, specifies the P_LVL3 I/O port of the platform. + C1ePlatformData1 UINT32 ? ; < If C1eMode is SW, specifies the address of chipset's SMI command port. + C1ePlatformData2 UINT32 ? ; < If C1eMode is SW, specifies the unique number used by the SMI handler to identify SMI source. + CStateMode PLATFORM_CSTATE_MODES ? ; < Specifies the method of C-State enablement - Disabled, or C6. + CStatePlatformData UINT32 ? ; < This element specifies some pertinent data needed for the operation of the Cstate feature + ; < If CStateMode is CStateModeC6, this item is reserved + CStateIoBaseAddress UINT16 ? ; < This item specifies a free block of 8 consecutive bytes of I/O ports that + ; < can be used to allow the CPU to enter Cstates. + CpbMode PLATFORM_CPB_MODES ? ; < Specifies the method of core performance boost enablement - Disabled, or Auto. + UserOptionDmi BOOLEAN ? ; < When set to TRUE, the DMI data table is generated. + UserOptionPState BOOLEAN ? ; < When set to TRUE, the PState data tables are generated. + UserOptionSrat BOOLEAN ? ; < When set to TRUE, the SRAT data table is generated. + UserOptionSlit BOOLEAN ? ; < When set to TRUE, the SLIT data table is generated. + UserOptionWhea BOOLEAN ? ; < When set to TRUE, the WHEA data table is generated. + PowerCeiling UINT32 ? ; < P-State Ceiling Enabling Deck - Max power milli-watts. + ForcePstateIndependent BOOLEAN ? ; < P-State _PSD independence or dependence. + NumberOfIoApics UINT32 ? ; < Number of I/O APICs in the system + VrmProperties PLATFORM_VRM_CONFIGURATION (MaxVrmType) DUP ({}) ; < Several configuration settings for the voltage regulator modules. + ProcessorScopeInSb BOOLEAN ? ; < ACPI Processor Object in \_SB scope + ProcessorScopeName0 CHAR8 ? ; < OEM specific 1st character of processor scope name. + ProcessorScopeName1 CHAR8 ? ; < OEM specific 2nd character of processor scope name. + GnbHdAudio UINT8 ? ; < Control GFX HD Audio controller(Used for HDMI and DP display output), + ; < essentially it enables function 1 of graphics device. + ; < @li 0 = HD Audio disable + ; < @li 1 = HD Audio enable + AbmSupport UINT8 ? ; < Automatic adjust LVDS/eDP Back light level support.It is + ; < characteristic specific to display panel which used by platform design. + ; < @li 0 = ABM support disabled + ; < @li 1 = ABM support enabled + DynamicRefreshRate UINT8 ? ; < Adjust refresh rate on LVDS/eDP. + LcdBackLightControl UINT16 ? ; < The PWM frequency to LCD backlight control. + ; < If equal to 0 backlight not controlled by iGPU. +PLATFORM_CONFIGURATION ENDS + + +; ********************************************************************* +; * Structures for: AmdInitLate +; ********************************************************************* + PROC_VERSION_LENGTH EQU 48 + MAX_DIMMS_PER_SOCKET EQU 16 + + + ; Interface Parameter Structures + ; DMI Type4 - Processor ID +TYPE4_PROC_ID STRUCT + ProcIdLsd UINT32 ? ; < Lower half of 64b ID + ProcIdMsd UINT32 ? ; < Upper half of 64b ID +TYPE4_PROC_ID ENDS + + ; DMI Type 4 - Processor information +TYPE4_DMI_INFO STRUCT + T4ProcType UINT8 ? ; < CPU Type + T4ProcFamily UINT8 ? ; < Family 1 + T4ProcId TYPE4_PROC_ID {} ; < Id + T4Voltage UINT8 ? ; < Voltage + T4ExternalClock UINT16 ? ; < External clock + T4MaxSpeed UINT16 ? ; < Max speed + T4CurrentSpeed UINT16 ? ; < Current speed + T4Status UINT8 ? ; < Status + T4ProcUpgrade UINT8 ? ; < Up grade + T4CoreCount UINT8 ? ; < Core count + T4CoreEnabled UINT8 ? ; < Core Enable + T4ThreadCount UINT8 ? ; < Thread count + T4ProcCharacteristics UINT16 ? ; < Characteristics + T4ProcFamily2 UINT16 ? ; < Family 2 + T4ProcVersion CHAR8 (PROC_VERSION_LENGTH) DUP (?) ; < Cpu version +TYPE4_DMI_INFO ENDS + + ; DMI Type 7 - Cache information +TYPE7_DMI_INFO STRUCT + T7CacheCfg UINT16 ? ; < Cache cfg + T7MaxCacheSize UINT16 ? ; < Max size + T7InstallSize UINT16 ? ; < Install size + T7SupportedSramType UINT16 ? ; < Supported Sram Type + T7CurrentSramType UINT16 ? ; < Current type + T7CacheSpeed UINT8 ? ; < Speed + T7ErrorCorrectionType UINT8 ? ; < ECC type + T7SystemCacheType UINT8 ? ; < Cache type + T7Associativity UINT8 ? ; < Associativity +TYPE7_DMI_INFO ENDS + + ; DMI Type 16 offset 04h - Location + + OtherLocation EQU 01h ; < Assign 01 to Other + UnknownLocation EQU 2 ; < Assign 02 to Unknown + SystemboardOrMotherboard EQU 3 ; < Assign 03 to systemboard or motherboard + IsaAddonCard EQU 4 ; < Assign 04 to ISA add-on card + EisaAddonCard EQU 5 ; < Assign 05 to EISA add-on card + PciAddonCard EQU 6 ; < Assign 06 to PCI add-on card + McaAddonCard EQU 7 ; < Assign 07 to MCA add-on card + PcmciaAddonCard EQU 8 ; < Assign 08 to PCMCIA add-on card + ProprietaryAddonCard EQU 9 ; < Assign 09 to proprietary add-on card + NuBus EQU 10 ; < Assign 0A to NuBus + Pc98C20AddonCard EQU 11 ; < Assign 0A0 to PC-98/C20 add-on card + Pc98C24AddonCard EQU 12 ; < Assign 0A1 to PC-98/C24 add-on card + Pc98EAddoncard EQU 13 ; < Assign 0A2 to PC-98/E add-on card + Pc98LocalBusAddonCard EQU 14 ; < Assign 0A3 to PC-98/Local bus add-on card +DMI_T16_LOCATION TEXTEQU <DWORD> ;} DMI_T16_LOCATION; + + ; DMI Type 16 offset 05h - Memory Error Correction + + OtherUse EQU 01h ; < Assign 01 to Other + UnknownUse EQU 2 ; < Assign 02 to Unknown + SystemMemory EQU 3 ; < Assign 03 to system memory + VideoMemory EQU 4 ; < Assign 04 to video memory + FlashMemory EQU 5 ; < Assign 05 to flash memory + NonvolatileRam EQU 6 ; < Assign 06 to non-volatile RAM + CacheMemory EQU 7 ; < Assign 07 to cache memory +DMI_T16_USE TEXTEQU <DWORD> ;} DMI_T16_USE; + + ; DMI Type 16 offset 07h - Maximum Capacity + + Dmi16OtherErrCorrection EQU 01h ; < Assign 01 to Other + Dmi16UnknownErrCorrection EQU 2 ; < Assign 02 to Unknown + Dmi16NoneErrCorrection EQU 3 ; < Assign 03 to None + Dmi16Parity EQU 4 ; < Assign 04 to parity + Dmi16SingleBitEcc EQU 5 ; < Assign 05 to Single-bit ECC + Dmi16MultiBitEcc EQU 6 ; < Assign 06 to Multi-bit ECC + Dmi16Crc EQU 7 ; < Assign 07 to CRC +DMI_T16_ERROR_CORRECTION TEXTEQU <DWORD> ;} DMI_T16_ERROR_CORRECTION; + + ; DMI Type 16 - Physical Memory Array +TYPE16_DMI_INFO STRUCT + Location DMI_T16_LOCATION ? ; < The physical location of the Memory Array, + ; < whether on the system board or an add-in board. + Use DMI_T16_USE ? ; < Identifies the function for which the array + ; < is used. + MemoryErrorCorrection DMI_T16_ERROR_CORRECTION ? ; < The primary hardware error correction or + ; < detection method supported by this memory array. + MaximumCapacity UINT32 ? ; < The maximum memory capacity, in kilobytes, + ; < for the array. + NumberOfMemoryDevices UINT16 ? ; < The number of slots or sockets available + ; < for memory devices in this array. +TYPE16_DMI_INFO ENDS + + ; DMI Type 17 offset 0Eh - Form Factor + OtherFormFactor EQU 01h ; < Assign 01 to Other + UnknowFormFactor EQU 2 ; < Assign 02 to Unknown + SimmFormFactor EQU 3 ; < Assign 03 to SIMM + SipFormFactor EQU 4 ; < Assign 04 to SIP + ChipFormFactor EQU 5 ; < Assign 05 to Chip + DipFormFactor EQU 6 ; < Assign 06 to DIP + ZipFormFactor EQU 7 ; < Assign 07 to ZIP + ProprietaryCardFormFactor EQU 8 ; < Assign 08 to Proprietary Card + DimmFormFactorFormFactor EQU 9 ; < Assign 09 to DIMM + TsopFormFactor EQU 10 ; < Assign 10 to TSOP + RowOfChipsFormFactor EQU 11 ; < Assign 11 to Row of chips + RimmFormFactor EQU 12 ; < Assign 12 to RIMM + SodimmFormFactor EQU 13 ; < Assign 13 to SODIMM + SrimmFormFactor EQU 14 ; < Assign 14 to SRIMM + FbDimmFormFactor EQU 15 ; < Assign 15 to FB-DIMM +DMI_T17_FORM_FACTOR TEXTEQU <DWORD> + + ; DMI Type 17 offset 12h - Memory Type + OtherMemType EQU 01h ; < Assign 01 to Other + UnknownMemType EQU 2 ; < Assign 02 to Unknown + DramMemType EQU 3 ; < Assign 03 to DRAM + EdramMemType EQU 4 ; < Assign 04 to EDRAM + VramMemType EQU 5 ; < Assign 05 to VRAM + SramMemType EQU 6 ; < Assign 06 to SRAM + RamMemType EQU 7 ; < Assign 07 to RAM + RomMemType EQU 8 ; < Assign 08 to ROM + FlashMemType EQU 9 ; < Assign 09 to Flash + EepromMemType EQU 10 ; < Assign 10 to EEPROM + FepromMemType EQU 11 ; < Assign 11 to FEPROM + EpromMemType EQU 12 ; < Assign 12 to EPROM + CdramMemType EQU 13 ; < Assign 13 to CDRAM + ThreeDramMemType EQU 14 ; < Assign 14 to 3DRAM + SdramMemType EQU 15 ; < Assign 15 to SDRAM + SgramMemType EQU 16 ; < Assign 16 to SGRAM + RdramMemType EQU 17 ; < Assign 17 to RDRAM + DdrMemType EQU 18 ; < Assign 18 to DDR + Ddr2MemType EQU 19 ; < Assign 19 to DDR2 + Ddr2FbdimmMemType EQU 20 ; < Assign 20 to DDR2 FB-DIMM + Ddr3MemType EQU 24 ; < Assign 24 to DDR3 + Fbd2MemType EQU 25 ; < Assign 25 to FBD2 +DMI_T17_MEMORY_TYPE TEXTEQU <DWORD> + + ; DMI Type 17 offset 13h - Type Detail +DMI_T17_TYPE_DETAIL STRUCT + Reserved1 UINT16 ? +; OUT UINT16 Reserved1:1; ; < Reserved +; OUT UINT16 Other:1; ; < Other +; OUT UINT16 Unknown:1; ; < Unknown +; OUT UINT16 FastPaged:1; ; < Fast-Paged +; OUT UINT16 StaticColumn:1; ; < Static column +; OUT UINT16 PseudoStatic:1; ; < Pseudo-static +; OUT UINT16 Rambus:1; ; < RAMBUS +; OUT UINT16 Synchronous:1; ; < Synchronous +; OUT UINT16 Cmos:1; ; < CMOS +; OUT UINT16 Edo:1; ; < EDO +; OUT UINT16 WindowDram:1; ; < Window DRAM +; OUT UINT16 CacheDram:1; ; < Cache Dram +; OUT UINT16 NonVolatile:1; ; < Non-volatile +; OUT UINT16 Reserved2:3; ; < Reserved +DMI_T17_TYPE_DETAIL ENDS + + ; DMI Type 17 - Memory Device +TYPE17_DMI_INFO STRUCT + TotalWidth UINT16 ? ; < Total Width, in bits, of this memory device, including any check or error-correction bits. + DataWidth UINT16 ? ; < Data Width, in bits, of this memory device. + MemorySize UINT16 ? ; < The size of the memory device. + FormFactor DMI_T17_FORM_FACTOR ? ; < The implementation form factor for this memory device. + DeviceSet UINT8 ? ; < Identifies when the Memory Device is one of a set of + ; < Memory Devices that must be populated with all devices of + ; < the same type and size, and the set to which this device belongs. + DeviceLocator CHAR8 (8) DUP (?) ; < The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + BankLocator CHAR8 (10) DUP (?) ; < The string number of the string that identifies the physically labeled bank where the memory device is located. + MemoryType DMI_T17_MEMORY_TYPE ? ; < The type of memory used in this device. + TypeDetail DMI_T17_TYPE_DETAIL {} ; < Additional detail on the memory device type + Speed UINT16 ? ; < Identifies the speed of the device, in megahertz (MHz). + ManufacturerIdCode UINT64 ? ; < Manufacturer ID code. + SerialNumber CHAR8 (9) DUP (?) ; < Serial Number. + PartNumber CHAR8 (19) DUP (?) ; < Part Number. + Attributes UINT8 ? ; < Bits 7-4: Reserved, Bits 3-0: rank. + ExtSize UINT32 ? ; < Extended Size. +TYPE17_DMI_INFO ENDS + + ; Memory DMI Type 17 and 20 - for memory use +MEM_DMI_INFO STRUCT + TotalWidth UINT16 ? ; ///< Total Width, in bits, of this memory device, including any check or error-correction bits. + DataWidth UINT16 ? ; ///< Data Width, in bits, of this memory device. + MemorySize UINT16 ? ; ///< The size of the memory device. + FormFactor DMI_T17_FORM_FACTOR ? ; ///< The implementation form factor for this memory device. + DeviceLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled socket or board position where the memory device is located. + BankLocator UINT8 ? ; ///< The string number of the string that identifies the physically labeled bank where the memory device is located. + Speed UINT16 ? ; ///< Identifies the speed of the device, in megahertz (MHz). + ManufacturerIdCode UINT64 ? ; ///< Manufacturer ID code. + SerialNumber UINT8 (4) DUP (?) ; ///< Serial Number. + PartNumber UINT8 (18) DUP (?) ; ///< Part Number. + Attributes UINT8 ? ; ///< Bits 7-4: Reserved, Bits 3-0: rank. + ExtSize UINT32 ? ; ///< Extended Size. + Socket UINT8 ? +; OUT UINT8 Socket:3 ; ///< Socket ID +; OUT UINT8 Channel:2 ; ///< Channel ID +; OUT UINT8 Dimm:2 ; ///< DIMM ID +; OUT UINT8 DimmPresent:1 ; ///< Dimm Present + StartingAddr UINT32 ? ; ///< The physical address, in kilobytes, of a range + ; ///< of memory mapped to the referenced Memory Device. + EndingAddr UINT32 ? ; ///< The handle, or instance number, associated with + ; ///< the Memory Device structure to which this address + ; ///< range is mapped. +MEM_DMI_INFO ENDS + + ; DMI Type 19 - Memory Array Mapped Address +TYPE19_DMI_INFO STRUCT + StartingAddr UINT32 ? ; < The physical address, in kilobytes, + ; < of a range of memory mapped to the + ; < specified physical memory array. + EndingAddr UINT32 ? ; < The physical ending address of the + ; < last kilobyte of a range of addresses + ; < mapped to the specified physical memory array. + MemoryArrayHandle UINT16 ? ; < The handle, or instance number, associated + ; < with the physical memory array to which this + ; < address range is mapped. + PartitionWidth UINT8 ? ; < Identifies the number of memory devices that + ; < form a single row of memory for the address + ; < partition defined by this structure. +TYPE19_DMI_INFO ENDS + +; DMI Type 20 - Memory Device Mapped Address +TYPE20_DMI_INFO STRUCT + StartingAddr UINT32 ? ; < The physical address, in kilobytes, of a range + ; < of memory mapped to the referenced Memory Device. + EndingAddr UINT32 ? ; < The handle, or instance number, associated with + ; < the Memory Device structure to which this address + ; < range is mapped. + MemoryDeviceHandle UINT16 ? ; < The handle, or instance number, associated with + ; < the Memory Device structure to which this address + ; < range is mapped. + MemoryArrayMappedAddressHandle UINT16 ? ; < The handle, or instance number, associated + ; < with the Memory Array Mapped Address structure to + ; < which this device address range is mapped. + PartitionRowPosition UINT8 ? ; < Identifies the position of the referenced Memory + ; < Device in a row of the address partition. + InterleavePosition UINT8 ? ; < The position of the referenced Memory Device in + ; < an interleave. + InterleavedDataDepth UINT8 ? ; < The maximum number of consecutive rows from the + ; < referenced Memory Device that are accessed in a + ; < single interleaved transfer. +TYPE20_DMI_INFO ENDS + + ; Collection of pointers to the DMI records +DMI_INFO STRUCT + T4 TYPE4_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 4 struc + T7L1 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 1 + T7L2 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 2 + T7L3 TYPE7_DMI_INFO (MAX_SOCKETS_SUPPORTED) DUP ({}) ; < Type 7 struc 3 + T16 TYPE16_DMI_INFO {} ; < Type 16 struc + T17 TYPE17_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 17 struc + T19 TYPE19_DMI_INFO {} ; < Type 19 struc + T20 TYPE20_DMI_INFO (MAX_SOCKETS_SUPPORTED * MAX_CHANNELS_PER_SOCKET * MAX_DIMMS_PER_CHANNEL) DUP ({}) ; < Type 20 struc +DMI_INFO ENDS + + + +; ********************************************************************* +; * Interface call: AllocateExecutionCache +; ********************************************************************* + MAX_CACHE_REGIONS EQU 3 + + ; AllocateExecutionCache sub param structure for cached memory region +EXECUTION_CACHE_REGION STRUCT + ExeCacheStartAddr UINT32 ? ; < Start address + ExeCacheSize UINT32 ? ; < Size +EXECUTION_CACHE_REGION ENDS + +; ********************************************************************* +; * Interface call: AmdGetAvailableExeCacheSize +; ********************************************************************* + ; Get available Cache remain +AMD_GET_EXE_SIZE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + AvailableExeCacheSize UINT32 ? ; < Remain size +AMD_GET_EXE_SIZE_PARAMS ENDS + + + + + + + ; Selection type for core leveling + CORE_LEVEL_LOWEST EQU 0 ; < Level to lowest common denominator + CORE_LEVEL_TWO EQU 1 ; < Level to 2 cores + CORE_LEVEL_POWER_OF_TWO EQU 2 ; < Level to 1,2,4 or 8 + CORE_LEVEL_NONE EQU 3 ; < Do no leveling + CORE_LEVEL_COMPUTE_UNIT EQU 4 ; < Level cores to one core per compute unit + CORE_LEVEL_ONE EQU 5 ; < Level to 1 core + CORE_LEVEL_THREE EQU 6 ; < Level to 3 cores + CORE_LEVEL_FOUR EQU 7 ; < Level to 4 cores + CORE_LEVEL_FIVE EQU 8 ; < Level to 5 cores + CORE_LEVEL_SIX EQU 9 ; < Level to 6 cores + CORE_LEVEL_SEVEN EQU 10 ; < Level to 7 cores + CORE_LEVEL_EIGHT EQU 11 ; < Level to 8 cores + CORE_LEVEL_NINE EQU 12 ; < Level to 9 cores + CORE_LEVEL_TEN EQU 13 ; < Level to 10 cores + CORE_LEVEL_ELEVEN EQU 14 ; < Level to 11 cores + CORE_LEVEL_TWELVE EQU 15 ; < Level to 12 cores + CORE_LEVEL_THIRTEEN EQU 16 ; < Level to 13 cores + CORE_LEVEL_FOURTEEN EQU 17 ; < Level to 14 cores + CORE_LEVEL_FIFTEEN EQU 18 ; < Level to 15 cores + CoreLevelModeMax EQU 19 ; < Used for bounds checking +CORE_LEVELING_TYPE TEXTEQU <DWORD> + + +; *********************************************************************** +; * +; * AGESA Basic Level interface structure definition and function prototypes +; * +; ********************************************************************** + +; ********************************************************************* +; * Interface call: AmdCreateStruct +; ********************************************************************* + +; ********************************************************************* +; * Interface call: AmdReleaseStruct +; ********************************************************************* + +; ********************************************************************* +; * Interface call: AmdInitReset +; ********************************************************************* + ; AmdInitReset param structure +AMD_RESET_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region + HtConfig AMD_HT_RESET_INTERFACE {} ; < The interface for Ht Recovery +AMD_RESET_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitEarly +; ********************************************************************* + ; InitEarly param structure + + ; Provide defaults or customizations to each service performed in AmdInitEarly. + +AMD_EARLY_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < The standard header + CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < Execution Map Interface + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + HtConfig AMD_HT_INTERFACE {} ; < HyperTransport Interface + GnbConfig GNB_CONFIGURATION {} ; < GNB configuration +AMD_EARLY_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitPost +; ********************************************************************* + ; AmdInitPost param structure +AMD_POST_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param +AMD_POST_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitEnv +; ********************************************************************* + ; AmdInitEnv param structure +AMD_ENV_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + GnbEnvConfiguration GNB_ENV_CONFIGURATION {} ; < platform operational characteristics. +AMD_ENV_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitMid +; ********************************************************************* + ; AmdInitMid param structure +AMD_MID_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. +AMD_MID_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitLate +; ********************************************************************* + ; AmdInitLate param structure +AMD_LATE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + DmiTable POINTER ? ; < DMI Interface + AcpiPState POINTER ? ; < Acpi Pstate SSDT Table + AcpiSrat POINTER ? ; < SRAT Table + AcpiSlit POINTER ? ; < SLIT Table + AcpiWheaMce POINTER ? ; < WHEA MCE Table + AcpiWheaCmc POINTER ? ; < WHEA CMC Table + AcpiAlib POINTER ? ; < ALIB Table +AMD_LATE_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdInitRecovery +; ********************************************************************* + ; CPU Recovery Parameters +AMD_CPU_RECOVERY_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard Header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics +AMD_CPU_RECOVERY_PARAMS ENDS + + ; AmdInitRecovery param structure +AMD_RECOVERY_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + MemConfig MEM_PARAMETER_STRUCT {} ; < Memory post param + CacheRegion EXECUTION_CACHE_REGION (3) DUP ({}) ; < The cached memory region. And the max cache region is 3 + CpuRecoveryParams AMD_CPU_RECOVERY_PARAMS {} ; < Params for CPU related recovery init. +AMD_RECOVERY_PARAMS ENDS + + +; ********************************************************************* +; * Interface call: AmdInitResume +; ********************************************************************* + ; AmdInitResume param structure +AMD_RESUME_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < Platform operational characteristics + S3DataBlock AMD_S3_PARAMS {} ; < Save state data +AMD_RESUME_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdS3LateRestore +; ********************************************************************* + ; AmdS3LateRestore param structure +AMD_S3LATE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + S3DataBlock AMD_S3_PARAMS {} ; < Save state data +AMD_S3LATE_PARAMS ENDS + +; ********************************************************************* +; * Interface call: AmdS3Save +; ********************************************************************* + ; AmdS3Save param structure +AMD_S3SAVE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Standard header + PlatformConfig PLATFORM_CONFIGURATION {} ; < platform operational characteristics. + S3DataBlock AMD_S3_PARAMS {} ; < Standard header +AMD_S3SAVE_PARAMS ENDS + + ; General Services API + + +; ********************************************************************* +; * Interface service call: AmdGetApicId +; ********************************************************************* + ; Request the APIC ID of a particular core. + +AMD_APIC_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. + Socket UINT8 ? ; < The Core's Socket. + Core UINT8 ? ; < The Core id. + IsPresent BOOLEAN ? ; < The Core is present, and ApicAddress is valid. + ApicAddress UINT8 ? ; < The Core's APIC ID. +AMD_APIC_PARAMS ENDS + +; ********************************************************************* +; * Interface service call: AmdGetPciAddress +; ********************************************************************* + ; Request the PCI Address of a Processor Module (that is, its Northbridge) + +AMD_GET_PCI_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. + Socket UINT8 ? ; < The Processor's socket + Module UINT8 ? ; < The Module in that Processor + IsPresent BOOLEAN ? ; < The Core is present, and PciAddress is valid. + PciAddress PCI_ADDR {} ; < The Processor's PCI Config Space address (Function 0, Register 0) +AMD_GET_PCI_PARAMS ENDS + +; ********************************************************************* +; * Interface service call: AmdIdentifyCore +; ********************************************************************* + ; Request the identity (Socket, Module, Core) of the current Processor Core + +AMD_IDENTIFY_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. + Socket UINT8 ? ; < The current Core's Socket + Module UINT8 ? ; < The current Core's Processor Module + Core UINT8 ? ; < The current Core's core id. +AMD_IDENTIFY_PARAMS ENDS + +; ********************************************************************* +; * Interface service call: AmdReadEventLog +; ********************************************************************* + ; An Event Log Entry. +EVENT_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. + EventClass UINT32 ? ; < The severity of this event, matches AGESA_STATUS. + EventInfo UINT32 ? ; < The unique event identifier, zero means "no event". + DataParam1 UINT32 ? ; < Data specific to the Event. + DataParam2 UINT32 ? ; < Data specific to the Event. + DataParam3 UINT32 ? ; < Data specific to the Event. + DataParam4 UINT32 ? ; < Data specific to the Event. +EVENT_PARAMS ENDS + +; ********************************************************************* +; * Interface service call: AmdIdentifyDimm +; ********************************************************************* + ; Request the identity of dimm from system address + +AMD_IDENTIFY_DIMM STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Header for library and services. + MemoryAddress UINT64 ? ; < System Address that needs to be translated to dimm identification. + SocketId UINT8 ? ; < The socket on which the targeted address locates. + MemChannelId UINT8 ? ; < The channel on which the targeted address locates. + DimmId UINT8 ? ; < The dimm on which the targeted address locates. +AMD_IDENTIFY_DIMM ENDS + + ; Data structure for the Mapping Item between Unified ID for IDS Setup Option + ; and the option value. + +IDS_NV_ITEM STRUCT + IdsNvId UINT16 ? ; < Unified ID for IDS Setup Option. + IdsNvValue UINT16 ? ; < The value of IDS Setup Option. +IDS_NV_ITEM ENDS + + ; Data Structure for IDS CallOut Function +IDS_CALLOUT_STRUCT STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < The Standard Header for AGESA Service + IdsNvPtr POINTER ? ; < Memory Pointer of IDS NV Table + Reserved UINT32 ? ; < reserved +IDS_CALLOUT_STRUCT ENDS + + AGESA_IDS_DFT_VAL EQU 0FFFFh; < Default value of every uninitlized NV item, the action for it will be ignored + AGESA_IDS_NV_END EQU 0FFFFh; < Flag specify end of option structure +; WARNING: Don't change the comment below, it used as signature for script +; AGESA IDS NV ID Definitions + AGESA_IDS_EXT_ID_START EQU 0000h; < specify the start of external NV id + + AGESA_IDS_NV_UCODE EQU 0001h; < Enable or disable microcode patching + + AGESA_IDS_NV_TARGET_PSTATE EQU 0002h; < Set the P-state required to be activated + AGESA_IDS_NV_POSTPSTATE EQU 0003h; < Set the P-state required to be activated through POST + + AGESA_IDS_NV_BANK_INTERLEAVE EQU 0004h; < Enable or disable Bank Interleave + AGESA_IDS_NV_CHANNEL_INTERLEAVE EQU 0005h; < Enable or disable Channel Interleave + AGESA_IDS_NV_NODE_INTERLEAVE EQU 0006h; < Enable or disable Node Interleave + AGESA_IDS_NV_MEMHOLE EQU 0007h; < Enables or disable memory hole + + AGESA_IDS_NV_SCRUB_REDIRECTION EQU 0008h; < Enable or disable a write to dram with corrected data + AGESA_IDS_NV_DRAM_SCRUB EQU 0009h; < Set the rate of background scrubbing for DRAM + AGESA_IDS_NV_DCACHE_SCRUB EQU 000Ah; < Set the rate of background scrubbing for the DCache. + AGESA_IDS_NV_L2_SCRUB EQU 000Bh; < Set the rate of background scrubbing for the L2 cache + AGESA_IDS_NV_L3_SCRUB EQU 000Ch; < Set the rate of background scrubbing for the L3 cache + AGESA_IDS_NV_ICACHE_SCRUB EQU 000Dh; < Set the rate of background scrubbing for the Icache + AGESA_IDS_NV_SYNC_ON_ECC_ERROR EQU 000Eh; < Enable or disable the sync flood on un-correctable ECC error + AGESA_IDS_NV_ECC_SYMBOL_SIZE EQU 000Fh; < Set ECC symbol size + + AGESA_IDS_NV_ALL_MEMCLKS EQU 0010h; < Enable or disable all memory clocks enable + AGESA_IDS_NV_DCT_GANGING_MODE EQU 0011h; < Set the Ganged mode + AGESA_IDS_NV_DRAM_BURST_LENGTH32 EQU 0012h; < Set the DRAM Burst Length 32 + AGESA_IDS_NV_MEMORY_POWER_DOWN EQU 0013h; < Enable or disable Memory power down mode + AGESA_IDS_NV_MEMORY_POWER_DOWN_MODE EQU 0014h; < Set the Memory power down mode + AGESA_IDS_NV_DLL_SHUT_DOWN EQU 0015h; < Enable or disable DLLShutdown + AGESA_IDS_NV_ONLINE_SPARE EQU 0016h; < Enable or disable the Dram controller to designate a DIMM bank as a spare for logical swap + + AGESA_IDS_NV_HT_ASSIST EQU 0017h; < Enable or Disable HT Assist + AGESA_IDS_NV_ATMMODE EQU 0018h; < Enable or Disable ATM mode + + AGESA_IDS_NV_HDTOUT EQU 0019h; < Enable or disable HDTOUT feature + + AGESA_IDS_NV_HTLINKSOCKET EQU 001Ah; < HT Link Socket + AGESA_IDS_NV_HTLINKPORT EQU 001Bh; < HT Link Port + AGESA_IDS_NV_HTLINKFREQ EQU 001Ch; < HT Link Frequency + AGESA_IDS_NV_HTLINKWIDTHIN EQU 001Dh; < HT Link In Width + AGESA_IDS_NV_HTLINKWIDTHOUT EQU 001Eh; < HT Link Out Width + + AGESA_IDS_NV_GNBHDAUDIOEN EQU 001Fh; < Enable or disable GNB HD Audio + + AGESA_IDS_NV_CPB_EN EQU 0020h; < Core Performance Boost + + AGESA_IDS_NV_HTC_EN EQU 0021h; < HTC Enable + AGESA_IDS_NV_HTC_OVERRIDE EQU 0022h; < HTC Override + AGESA_IDS_NV_HTC_PSTATE_LIMIT EQU 0023h; < HTC P-state limit select + AGESA_IDS_NV_HTC_TEMP_HYS EQU 0024h; < HTC Temperature Hysteresis + AGESA_IDS_NV_HTC_ACT_TEMP EQU 0025h; < HTC Activation Temp + + AGESA_IDS_NV_POWER_POLICY EQU 0026h; < Select Platform Power Policy + AGESA_IDS_EXT_ID_END EQU 0027h; < specify the end of external NV ID + + IDS_EX_NV_ID TEXTEQU <DWORD> diff --git a/src/vendorcode/amd/agesa/Legacy/amd.inc b/src/vendorcode/amd/agesa/Legacy/amd.inc new file mode 100644 index 0000000000..b7162024e4 --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/amd.inc @@ -0,0 +1,461 @@ +; **************************************************************************** +; * +; * @file +; * +; * Agesa structures and definitions +; * +; * Contains AMD AGESA core interface +; * +; * @xrefitem bom "File Content Label" "Release Content" +; * @e project: AGESA +; * @e sub-project: Include +; * @e \$Revision: 33891 $ @e \$Date: 2010-06-26 00:22:54 +0800 (Sat, 26 Jun 2010) $ +; +;***************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;***************************************************************************** + + +UINT64 TEXTEQU <QWORD> +UINT32 TEXTEQU <DWORD> +UINT16 TEXTEQU <WORD> +UINT8 TEXTEQU <BYTE> +CHAR8 TEXTEQU <BYTE> +BOOLEAN TEXTEQU <BYTE> +POINTER TEXTEQU <DWORD> + + ; AGESA Types and Definitions + + AGESA_REVISION EQU "Arch2008" + AGESA_ID EQU "AGESA" + + LAST_ENTRY EQU 0FFFFFFFFh + IMAGE_SIGNATURE EQU 'DMA$' + IOCF8 EQU 0CF8h + IOCFC EQU 0CFCh + + ; The return status for all AGESA public services. + + ; Services return the most severe status of any logged event. Status other than SUCCESS, UNSUPPORTED, and BOUNDS_CHK + ; will have log entries with more detail. + + AGESA_SUCCESS EQU 0 ; < The service completed normally. Info may be logged. + AGESA_UNSUPPORTED EQU 1 ; < The dispatcher or create struct had an unimplemented function requested. + ; < Not logged. + AGESA_BOUNDS_CHK EQU 2 ; < A dynamic parameter was out of range and the service was not provided. + ; < Example, memory address not installed, heap buffer handle not found. + ; < Not Logged. + ; AGESA_STATUS of greater severity (the ones below this line), always have a log entry available. + AGESA_ALERT EQU 3 ; < An observed condition, but no loss of function. + ; < See log. Example, HT CRC. + AGESA_WARNING EQU 4 ; < Possible or minor loss of function. See Log. + AGESA_ERROR EQU 5 ; < Significant loss of function, boot may be possible. See Log. + AGESA_CRITICAL EQU 6 ; < Continue boot only to notify user. See Log. + AGESA_FATAL EQU 7 ; < Halt booting. See Log. + AgesaStatusMax EQU 8 ; < Not a status, use for limit checking. +AGESA_STATUS TEXTEQU <DWORD> + +; For checking whether a status is at or above the mandatory log level. +AGESA_STATUS_LOG_LEVEL EQU AGESA_ALERT + + CALLOUT_ENTRY TEXTEQU <POINTER> + IMAGE_ENTRY TEXTEQU <POINTER> + MODULE_ENTRY TEXTEQU <POINTER> + +; This allocation type is used by the AmdCreateStruct entry point + PreMemHeap EQU 0 ; < Create heap in cache. + PostMemDram EQU 1 ; < Create heap in memory. + ByHost EQU 2 ; < Create heap by Host. +ALLOCATION_METHOD TEXTEQU <DWORD> + + ; These width descriptors are used by the library function, and others, to specify the data size + AccessWidth8 EQU 1 ; < Access width is 8 bits. + AccessWidth16 EQU 2 ; < Access width is 16 bits. + AccessWidth32 EQU 3 ; < Access width is 32 bits. + AccessWidth64 EQU 4 ; < Access width is 64 bits. + + AccessS3SaveWidth8 EQU 81h ; < Save 8 bits data. + AccessS3SaveWidth16 EQU 130 ; < Save 16 bits data. + AccessS3SaveWidth32 EQU 131 ; < Save 32 bits data. + AccessS3SaveWidth64 EQU 132 ; < Save 64 bits data. +ACCESS_WIDTH TEXTEQU <DWORD> + + ; AGESA struct name + + ; AGESA BASIC FUNCTIONS + AMD_INIT_RECOVERY EQU 00020000h + AMD_CREATE_STRUCT EQU 00020001h + AMD_INIT_EARLY EQU 00020002h + AMD_INIT_ENV EQU 00020003h + AMD_INIT_LATE EQU 00020004h + AMD_INIT_MID EQU 00020005h + AMD_INIT_POST EQU 00020006h + AMD_INIT_RESET EQU 00020007h + AMD_INIT_RESUME EQU 00020008h + AMD_RELEASE_STRUCT EQU 00020009h + AMD_S3LATE_RESTORE EQU 0002000Ah + AMD_S3_SAVE EQU 0002000Bh + AMD_GET_APIC_ID EQU 0002000Ch + AMD_GET_PCI_ADDRESS EQU 0002000Dh + AMD_IDENTIFY_CORE EQU 0002000Eh + AMD_READ_EVENT_LOG EQU 0002000Fh + AMD_GET_EXECACHE_SIZE EQU 00020010h + AMD_LATE_RUN_AP_TASK EQU 00020011h + AMD_IDENTIFY_DIMMS EQU 00020012h +AGESA_STRUCT_NAME TEXTEQU <DWORD> + + + ; ResetType constant values + WARM_RESET_WHENEVER EQU 1 + COLD_RESET_WHENEVER EQU 2 + WARM_RESET_IMMEDIATELY EQU 3 + COLD_RESET_IMMEDIATELY EQU 4 + + + ; AGESA Structures + + ; The standard header for all AGESA services. +AMD_CONFIG_PARAMS STRUCT + ImageBasePtr UINT32 ? ; < The AGESA Image base address. + Func UINT32 ? ; < The service desired, @sa dispatch.h. + AltImageBasePtr UINT32 ? ; < Alternate Image location + CalloutPtr CALLOUT_ENTRY ? ; < For Callout from AGESA + HeapStatus UINT8 ? ; < For heap status from boot time slide. + HeapBasePtr UINT64 ? ; < Location of the heap + Reserved UINT8 (7) DUP (?) ; < This space is reserved for future use. +AMD_CONFIG_PARAMS ENDS + + + ; Create Struct Interface. +AMD_INTERFACE_PARAMS STRUCT + StdHeader AMD_CONFIG_PARAMS {} ; < Config header + AgesaFunctionName AGESA_STRUCT_NAME ? ; < The service to init, @sa dispatch.h + AllocationMethod ALLOCATION_METHOD ? ; < How to handle buffer allocation + NewStructSize UINT32 ? ; < The size of the allocated data, in for ByHost, else out only. + NewStructPtr POINTER ? ; < The struct for the service. + ; < The struct to init for ByHost allocation, + ; < the initialized struct on return. +AMD_INTERFACE_PARAMS ENDS + + FUNC_0 EQU 0 ; bit-placed for PCI address creation + FUNC_1 EQU 1 + FUNC_2 EQU 2 + FUNC_3 EQU 3 + FUNC_4 EQU 4 + FUNC_5 EQU 5 + FUNC_6 EQU 6 + FUNC_7 EQU 7 + + ; AGESA Binary module header structure +AMD_IMAGE_HEADER STRUCT + Signature UINT32 ? ; < Binary Signature + CreatorID CHAR8 (8) DUP (?) ; < 8 characters ID + Version CHAR8 (12) DUP (?) ; < 12 characters version + ModuleInfoOffset UINT32 ? ; < Offset of module + EntryPointAddress UINT32 ? ; < Entry address + ImageBase UINT32 ? ; < Image base + RelocTableOffset UINT32 ? ; < Relocate Table offset + ImageSize UINT32 ? ; < Size + Checksum UINT16 ? ; < Checksum + ImageType UINT8 ? ; < Type + V_Reserved UINT8 ? ; < Reserved +AMD_IMAGE_HEADER ENDS + ; AGESA Binary module header structure +AMD_MODULE_HEADER STRUCT + ModuleHeaderSignature UINT32 ? ; < Module signature + ModuleIdentifier CHAR8 (8) DUP (?) ; < 8 characters ID + ModuleVersion CHAR8 (12) DUP (?) ; < 12 characters version + ModuleDispatcher POINTER ? ; < A pointer point to dispatcher + NextBlock POINTER ? ; < Next module header link +AMD_MODULE_HEADER ENDS + +; AMD_CODE_HEADER Signatures. +AGESA_CODE_SIGNATURE TEXTEQU <'!', '!', 'A', 'G', 'E', 'S', 'A', ' '> +CIMXNB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'N', 'B'> +CIMXSB_CODE_SIGNATURE TEXTEQU <'!', '!', 'C', 'I', 'M', 'X', 'S', 'B'> + +; AGESA_CODE_SIGNATURE +AMD_CODE_HEADER STRUCT + Signature CHAR8 (8) DUP (?) ; < code header Signature + ComponentName CHAR8 (8) DUP (?) ; < 8 character name of the code module + Version CHAR8 (12) DUP (?) ; < 12 character version string + TerminatorNull CHAR8 ? ; < null terminated string + VerReserved CHAR8 (7) DUP (?) ; < reserved space +AMD_CODE_HEADER ENDS + + ; Extended PCI address format +EXT_PCI_ADDR STRUCT + Register UINT32 ? +; IN OUT UINT32 Register:12; ; < Register offset +; IN OUT UINT32 Function:3; ; < Function number +; IN OUT UINT32 Device:5; ; < Device number +; IN OUT UINT32 Bus:8; ; < Bus number +; IN OUT UINT32 Segment:4; ; < Segment +EXT_PCI_ADDR ENDS + + ; Union type for PCI address +PCI_ADDR UNION + AddressValue UINT32 ? ; < Formal address + Address EXT_PCI_ADDR {} ; < Extended address +PCI_ADDR ENDS + + ; SBDFO - Segment Bus Device Function Offset + ; 31:28 Segment (4-bits) + ; 27:20 Bus (8-bits) + ; 19:15 Device (5-bits) + ; 14:12 Function(3-bits) + ; 11:00 Offset (12-bits) + + + + ILLEGAL_SBDFO EQU 0FFFFFFFFh + + ; CPUID data received registers format +CPUID_DATA STRUCT + EAX_Reg UINT32 ? ; < CPUID instruction result in EAX + EBX_Reg UINT32 ? ; < CPUID instruction result in EBX + ECX_Reg UINT32 ? ; < CPUID instruction result in ECX + EDX_Reg UINT32 ? ; < CPUID instruction result in EDX +CPUID_DATA ENDS + + ; HT frequency for external callbacks +;typedef enum { + HT_FREQUENCY_200M EQU 0 ; < HT speed 200 for external callbacks + HT_FREQUENCY_400M EQU 2 ; < HT speed 400 for external callbacks + HT_FREQUENCY_600M EQU 4 ; < HT speed 600 for external callbacks + HT_FREQUENCY_800M EQU 5 ; < HT speed 800 for external callbacks + HT_FREQUENCY_1000M EQU 6 ; < HT speed 1000 for external callbacks + HT_FREQUENCY_1200M EQU 7 ; < HT speed 1200 for external callbacks + HT_FREQUENCY_1400M EQU 8 ; < HT speed 1400 for external callbacks + HT_FREQUENCY_1600M EQU 9 ; < HT speed 1600 for external callbacks + HT_FREQUENCY_1800M EQU 10 ; < HT speed 1800 for external callbacks + HT_FREQUENCY_2000M EQU 11 ; < HT speed 2000 for external callbacks + HT_FREQUENCY_2200M EQU 12 ; < HT speed 2200 for external callbacks + HT_FREQUENCY_2400M EQU 13 ; < HT speed 2400 for external callbacks + HT_FREQUENCY_2600M EQU 14 ; < HT speed 2600 for external callbacks + HT_FREQUENCY_2800M EQU 17 ; < HT speed 2800 for external callbacks + HT_FREQUENCY_3000M EQU 18 ; < HT speed 3000 for external callbacks + HT_FREQUENCY_3200M EQU 19 ; < HT speed 3200 for external callbacks + HT_FREQUENCY_MAX EQU 20 ; < Limit Check. +HT_FREQUENCIES TEXTEQU <DWORD> ;} HT_FREQUENCIES; + +HT3_FREQUENCY_MIN EQU HT_FREQUENCY_1200M + +IFNDEF BIT0 + BIT0 EQU 0000000000000001h +ENDIF +IFNDEF BIT1 + BIT1 EQU 0000000000000002h +ENDIF +IFNDEF BIT2 + BIT2 EQU 0000000000000004h +ENDIF +IFNDEF BIT3 + BIT3 EQU 0000000000000008h +ENDIF +IFNDEF BIT4 + BIT4 EQU 0000000000000010h +ENDIF +IFNDEF BIT5 + BIT5 EQU 0000000000000020h +ENDIF +IFNDEF BIT6 + BIT6 EQU 0000000000000040h +ENDIF +IFNDEF BIT7 + BIT7 EQU 0000000000000080h +ENDIF +IFNDEF BIT8 + BIT8 EQU 0000000000000100h +ENDIF +IFNDEF BIT9 + BIT9 EQU 0000000000000200h +ENDIF +IFNDEF BIT10 + BIT10 EQU 0000000000000400h +ENDIF +IFNDEF BIT11 + BIT11 EQU 0000000000000800h +ENDIF +IFNDEF BIT12 + BIT12 EQU 0000000000001000h +ENDIF +IFNDEF BIT13 + BIT13 EQU 0000000000002000h +ENDIF +IFNDEF BIT14 + BIT14 EQU 0000000000004000h +ENDIF +IFNDEF BIT15 + BIT15 EQU 0000000000008000h +ENDIF +IFNDEF BIT16 + BIT16 EQU 0000000000010000h +ENDIF +IFNDEF BIT17 + BIT17 EQU 0000000000020000h +ENDIF +IFNDEF BIT18 + BIT18 EQU 0000000000040000h +ENDIF +IFNDEF BIT19 + BIT19 EQU 0000000000080000h +ENDIF +IFNDEF BIT20 + BIT20 EQU 0000000000100000h +ENDIF +IFNDEF BIT21 + BIT21 EQU 0000000000200000h +ENDIF +IFNDEF BIT22 + BIT22 EQU 0000000000400000h +ENDIF +IFNDEF BIT23 + BIT23 EQU 0000000000800000h +ENDIF +IFNDEF BIT24 + BIT24 EQU 0000000001000000h +ENDIF +IFNDEF BIT25 + BIT25 EQU 0000000002000000h +ENDIF +IFNDEF BIT26 + BIT26 EQU 0000000004000000h +ENDIF +IFNDEF BIT27 + BIT27 EQU 0000000008000000h +ENDIF +IFNDEF BIT28 + BIT28 EQU 0000000010000000h +ENDIF +IFNDEF BIT29 + BIT29 EQU 0000000020000000h +ENDIF +IFNDEF BIT30 + BIT30 EQU 0000000040000000h +ENDIF +IFNDEF BIT31 + BIT31 EQU 0000000080000000h +ENDIF +IFNDEF BIT32 + BIT32 EQU 0000000100000000h +ENDIF +IFNDEF BIT33 + BIT33 EQU 0000000200000000h +ENDIF +IFNDEF BIT34 + BIT34 EQU 0000000400000000h +ENDIF +IFNDEF BIT35 + BIT35 EQU 0000000800000000h +ENDIF +IFNDEF BIT36 + BIT36 EQU 0000001000000000h +ENDIF +IFNDEF BIT37 + BIT37 EQU 0000002000000000h +ENDIF +IFNDEF BIT38 + BIT38 EQU 0000004000000000h +ENDIF +IFNDEF BIT39 + BIT39 EQU 0000008000000000h +ENDIF +IFNDEF BIT40 + BIT40 EQU 0000010000000000h +ENDIF +IFNDEF BIT41 + BIT41 EQU 0000020000000000h +ENDIF +IFNDEF BIT42 + BIT42 EQU 0000040000000000h +ENDIF +IFNDEF BIT43 + BIT43 EQU 0000080000000000h +ENDIF +IFNDEF BIT44 + BIT44 EQU 0000100000000000h +ENDIF +IFNDEF BIT45 + BIT45 EQU 0000200000000000h +ENDIF +IFNDEF BIT46 + BIT46 EQU 0000400000000000h +ENDIF +IFNDEF BIT47 + BIT47 EQU 0000800000000000h +ENDIF +IFNDEF BIT48 + BIT48 EQU 0001000000000000h +ENDIF +IFNDEF BIT49 + BIT49 EQU 0002000000000000h +ENDIF +IFNDEF BIT50 + BIT50 EQU 0004000000000000h +ENDIF +IFNDEF BIT51 + BIT51 EQU 0008000000000000h +ENDIF +IFNDEF BIT52 + BIT52 EQU 0010000000000000h +ENDIF +IFNDEF BIT53 + BIT53 EQU 0020000000000000h +ENDIF +IFNDEF BIT54 + BIT54 EQU 0040000000000000h +ENDIF +IFNDEF BIT55 + BIT55 EQU 0080000000000000h +ENDIF +IFNDEF BIT56 + BIT56 EQU 0100000000000000h +ENDIF +IFNDEF BIT57 + BIT57 EQU 0200000000000000h +ENDIF +IFNDEF BIT58 + BIT58 EQU 0400000000000000h +ENDIF +IFNDEF BIT59 + BIT59 EQU 0800000000000000h +ENDIF +IFNDEF BIT60 + BIT60 EQU 1000000000000000h +ENDIF +IFNDEF BIT61 + BIT61 EQU 2000000000000000h +ENDIF +IFNDEF BIT62 + BIT62 EQU 4000000000000000h +ENDIF +IFNDEF BIT63 + BIT63 EQU 8000000000000000h +ENDIF + diff --git a/src/vendorcode/amd/agesa/Legacy/bridge32.inc b/src/vendorcode/amd/agesa/Legacy/bridge32.inc new file mode 100644 index 0000000000..8685c6c077 --- /dev/null +++ b/src/vendorcode/amd/agesa/Legacy/bridge32.inc @@ -0,0 +1,577 @@ +; **************************************************************************** +; * +; * @file +; * +; * Agesa structures and definitions +; * +; * Contains AMD AGESA core interface +; * +; * @xrefitem bom "File Content Label" "Release Content" +; * @e project: AGESA +; * @e sub-project: Include +; * @e \$Revision: 23714 $ @e \$Date: 2009-12-10 07:28:37 +0800 (Thu, 10 Dec 2009) $ +; +;***************************************************************************** +; +; Copyright (c) 2011, Advanced Micro Devices, Inc. +; All rights reserved. +; +; Redistribution and use in source and binary forms, with or without +; modification, are permitted provided that the following conditions are met: +; * Redistributions of source code must retain the above copyright +; notice, this list of conditions and the following disclaimer. +; * Redistributions in binary form must reproduce the above copyright +; notice, this list of conditions and the following disclaimer in the +; documentation and/or other materials provided with the distribution. +; * Neither the name of Advanced Micro Devices, Inc. nor the names of +; its contributors may be used to endorse or promote products derived +; from this software without specific prior written permission. +; +; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +; WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +; DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY +; DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +; (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +; ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +; (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;***************************************************************************** + +PARAM1 textequ <[bp+8]> +PARAM2 textequ <[bp+12]> +PARAM3 textequ <[bp+16]> +RETAddress textequ <[bp+4]> + +AMD_PRIVATE_PARAMS STRUCT + Gate16_CS DW ? ; Segment of AMD_BRIDGE_32 and AMD_CALLOUT_16 + Gate16_SS DW ? ; RM stack segment + Router_Seg DW ? ; Segment of oem router + Router_Off DW ? ; Offset of oem router +AMD_PRIVATE_PARAMS ENDS + +; OEM may pre-define the GDT and selector offsets. If they do not, use our defaults. +IFNDEF AGESA_SELECTOR_GDT + AGESA_SELECTOR_GDT EQU 00h +ENDIF +IFNDEF AGESA_SELECTOR_CODE16 + AGESA_SELECTOR_CODE16 EQU 08h +ENDIF +IFNDEF AGESA_SELECTOR_DATA16 + AGESA_SELECTOR_DATA16 EQU 10h +ENDIF +IFNDEF AGESA_SELECTOR_CODE32 + AGESA_SELECTOR_CODE32 EQU 18h +ENDIF +IFNDEF AGESA_SELECTOR_DATA32 + AGESA_SELECTOR_DATA32 EQU 20h +ENDIF + + +AMD_BRIDGE_32_GDT MACRO GDT_Name:REQ + + GDT_Name LABEL BYTE + DD 000000000h, 000000000h ; NULL descriptor + DD 00000ffffh, 000009b00h ; 16-bit code, fixed up + DD 00000ffffh, 000009300h ; 16-bit data, fixed up + DD 00000ffffh, 000CF9B00h ; 32-bit protected mode code + DD 00000ffffh, 000CF9300h ; 32-bit protected mode data + GDT_Length EQU ($-GDT_Name) + +ENDM + +;+------------------------------------------------------------------------- +; +; AMD_BRIDGE_32 - Execute Agesa through Pushhigh interface +; +; Processing: +; The following steps are taken: +; 1) Enter 32bit Protected Mode (PM32) +; 2) Run AGESA code +; 3) Restore Real Mode (RM) +; +; Entry: +; [big real mode] : ds, es set to base 0 limit 4G segment +; EDX - if not 0, provides a FAR PTR to oem router (Seg | Offset) +; ESI - configuration block pointer +; +; Exit: +; EAX - return value +; ESI - configuration block pointer +; ds, es, fs, gs - Set to 4GB segment limit for Big Real Mode +; +; Modified: +; None +; + +AMD_BRIDGE_32 MACRO GDT_Name + + local copyGDT + local flushTo16PM + local agesaReturnAddress + local leave32bitPM + local flush2RM + + push gs + push fs + push ebx + push ecx + push edi + mov eax, esp + push eax + movzx esp, sp +; +; Do not use any locals here, BP will be changed frequently during RM->PM32->RM +; + pushf + cli ; Disable interrupts during AGESA + cld ; Need known direction flag during AGESA + +; +; Save the FAR PTR input parameter +; + mov gs, dx ; Offset + shr edx, 16 + mov fs, dx ; Segment +; +; Determine where our binary file is and get entry point +; + mov edx, (AMD_CONFIG_PARAMS PTR [esi]).ImageBasePtr + add edx, (AMD_IMAGE_HEADER PTR [edx]).EntryPointAddress +; +; Figure out the return address we will use after calling AGESA +; and store it in ebx until we have our stack set up properly +; + mov ebx, cs + shl ebx, 4 + add ebx, OFFSET agesaReturnAddress +; +; Save our current RM stack AND entry EBP +; + push ebp +; push esp + push ss + +; +; BEGIN --- STACK MUST BE BALANCED AT THIS POINT --- BEGIN +; +; Copy the GDT onto the stack for modification +; + mov cx, GDT_Length + sub sp, cx + mov bp, sp + lea di, GDT_Name +copyGDT: + mov al, cs:[di] + mov [bp], al + inc di + inc bp + loop copyGDT +; +; Patch 16-bit code and data descriptors on stack. We will +; fix up CS and SS for PM16 during the callout if applicable. +; + mov bp, sp + + mov eax, cs + shl eax, 4 + mov [bp+AGESA_SELECTOR_CODE16+2], ax + shr eax, 16 + mov [bp+AGESA_SELECTOR_CODE16+4], al + + mov eax, ss + shl eax, 4 + mov [bp+AGESA_SELECTOR_DATA16+2], ax + shr eax, 16 + mov [bp+AGESA_SELECTOR_DATA16+4], al +; +; Need to place Length and Address on GDT +; + mov eax, ss + shl eax, 4 + add eax, esp + push eax + push WORD PTR (GDT_Length-1) +; +; Load the GDT +; + mov bp, sp + lgdt FWORD PTR [bp] +; +; TABLE 1 +; +; Place PRIVATE DATA on stack DIRECTLY following GDT +; During this routine, stack data is critical. If +; order is changed or additional added, bad things +; will happen! +; +; HIGHEST PHYSICAL ADDRESS +; +; | ... | +; ------------------------ +; | old RM SP | +; | old RM SS | +; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS + (SIZEOF GDT_LENGTH + 6 {size, address}) +; | GDT_DATA32 | +; | ... | +; | GDT_NULL | +; | GDT Addr, Length | +; ------------------------ sp + SIZEOF AMD_PRIVATE_PARAMS +; | Priv.Gate16_SS | +; | Priv.Gate16_CS | +; ------------------------ sp +; ------ THEN PUSH ------- +; | Return to 16-bit CS | +; | Return to 16-bit Off | +; | ... | +; +; LOWEST PHYSICAL ADDRESS +; + mov edi, esp + sub edi, SIZEOF AMD_PRIVATE_PARAMS + mov ax, cs + mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS, ax + mov ax, ss + mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS, ax + mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off, gs + mov (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg, fs + + mov esp, edi +; +; Save an address for returning to 16 bit real mode on stack, +; we'll use it in a far ret after turning off CR0.PE so that +; we can take our address off and force a far jump. Be sure +; no unexpected data is on the stack after this! +; + mov ax, cs + push cs + lea ax, flush2RM + push ax +; +; Convert ss:esp to "flat" +; + + mov ax, sp + push ax + mov eax, ss + shl eax, 4 + add eax, esp + mov esp, eax ; Load the zero based ESP + +; +; Set CR0.PE +; + mov eax, CR0 ; Get CPU control word 0 + or al, 01 ; Enable CPU protected mode + mov CR0, eax ; Write back to CPU control word 0 + jmp flushTo16PM + +flushTo16PM: +; +; 16-bit protected mode +; + mov ax, AGESA_SELECTOR_DATA32 + mov ds, ax + mov es, ax + mov fs, ax + mov gs, ax + mov ss, ax +; +; Push our parameters RIGHT TO LEFT, and then return address +; + push esi ; AGESA configuration block pointer (data) + push ebx ; after AGESA return offset (32PM flat) - consumed by dispatcher ret + pushd AGESA_SELECTOR_CODE32 ; AGESA entry selector (32PM flat) + push edx ; AGESA entry point (32PM flat) + + DB 066h + retf ; <><><> Enter AGESA 32-bit code!!! <><><> + +agesaReturnAddress: +; +; Returns from the Agesa 32-bit code still PM32 +; + DB 0EAh + DD OFFSET leave32bitPM + DW AGESA_SELECTOR_CODE16 + +leave32bitPM: +; +; Now in 16-bit PM +; + add esp, 4 ; +4 to remove our config block pointer +; +; Eax reserve AGESA_STATUS return code, save it +; + mov ebx, eax +; +; Turn off CR0.PE, restore 64K stack limit +; + pop ax + mov sp, ax + mov ax, AGESA_SELECTOR_DATA16 + mov ss, ax + + mov eax, CR0 + and al, NOT 1 ; Disable protected mode + mov CR0, eax ; Write back CR0.PE +; +; Jump far to enter RM, we saved this address on the stack +; already. Hopefully stack is balanced through AGESA +; nor were any params added by pushing them on the stack and +; not removing them between BEGIN-END comments. +; + retf + +flush2RM: +; +; Set segments registers for big real mode before returning +; + xor ax, ax + mov ds, ax + mov es, ax + mov fs, ax + mov gs, ax +; +; Discard GDT, +6 for GDT pointer/size, privates +; + add esp, GDT_Length + 6 + SIZEOF AMD_PRIVATE_PARAMS +; +; Restore real mode stack and entry EBP +; + pop cx +; mov esp, [esp] + mov ss, cx + pop ebp +; +; Restore AGESA_STATUS return code to eax +; + mov eax, ebx +; +; END --- STACK MUST BE BALANCED TO THIS POINT --- END +; + + popf + pop ebx + mov esp, ebx + pop edi + pop ecx + pop ebx + pop fs + pop gs + ; EXIT AMD_BRIDGE_32 +ENDM +;+------------------------------------------------------------------------- +; +; AMD_CALLOUT_16 - Execute Callback from Pushhigh interface +; +; Processing: +; The following steps are taken: +; 1) Enter PM16 +; 2) Setup stack, get private params +; 3) Enter RM +; 4) Get 3 params +; 5) Call oemCallout OR oem router +; 6) Enter PM32 +; 7) Return to Agesa PH +; +; Entry: +; [32-bit protected mode] +; [esp+8] Func +; [esp+12] Data +; [esp+16] Configuration Block +; [esp+4] return address to Agesa +; +; Exit: +; [32-bit protected mode] +; +; Modified: +; None +; +AMD_CALLOUT_16 MACRO LocalOemCalloutRouter +; +; Note that we are still PM32, so MASM may work strangely +; + + push bp ; Save our original SP to access params + mov bp, sp + push bx + push si + push di + push cx + push dx + push di + + DB 066h, 0EAh + DW OFFSET PM16Entry + DW AGESA_SELECTOR_CODE16 + +PM16Entry: +; +; PM16 CS, but still PM32 SS, as we need to access our private params +; before we enter RM. +; +; Note: we are working below the stack temporarily, and and it will +; not affect our ability to get entry params +; + xor ecx, ecx + xor edx, edx +; +; SGDT will give us the original location of the GDT on our CAS stack. +; We need this value because our private parameters are located just +; below the GDT. +; + mov edi, esp + sub edi, GDT_Length + 6 + sgdt FWORD PTR [edi] ; [edi] = word size, dword address + mov edi, DWORD PTR [edi+2] ; Get the PM32 address only + sub edi, SIZEOF AMD_PRIVATE_PARAMS + 6 +; +; cx = code segment of this code in RM +; dx = stack segment of CAS in RM +; fs = code segment of oem router (save for later) +; gs = offset of oem router (save for later) +; fs and gs are loaded after switch to real mode because we can't +; use them as scratch pad registers in protected mode +; + mov cx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_CS + mov dx, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Gate16_SS + + mov eax, edi ; Save edi in eax for after RM switch + mov edi, esp ; Save our current ESP for RM + + movzx ebx, dx + shl ebx, 4 + sub esp, ebx + +; +; We had been accessing the stack in PM32, we will now change to PM16 so we +; will make the stack segment 64KB limit so SP needs to be fixed made PM16 +; compatible. +; + mov bx, AGESA_SELECTOR_DATA16 + mov ss, bx + +; +; Save the RM segment and RM offset of the jump we will need to make in +; order to enter RM so that code in this segment is relocatable. +; +; BEGIN --- Don't unbalance the stack --- BEGIN +; + push cx + pushw OFFSET RMEntry + + mov ebx, CR0 + and bl, NOT 1 + mov CR0, ebx ; CR0.PE cleared +; +; Far jump to clear segment descriptor cache and enter RM +; + retf + +RMEntry: +; +; We are in RM, setup RM stack +; + movzx ebx, dx ; Get RM SS in ebx + shl ebx, 4 ; Get our stack top on entry in EBP to + sub ebp, ebx ; access our entry parameters + sub eax, ebx ; save copy of parameters address + mov ss, dx ; Set stack segment +; +; We are going to figure out the address to use when we return +; and have to go back into PM32 while we have access to it +; + movzx ebx, cx ; Get original CS in ebx + shl ebx, 4 + add ebx, OFFSET PM32Entry +; +; Now we put our data, func, block params into calling convention +; for our hook +; +; ECX = Func +; EDX = Data +; ESI = config pointer +; + mov ecx, PARAM1 ; Func + mov edx, PARAM2 ; Data + mov esi, PARAM3 ; pointer + + push ebx ; Save PM32 mode switch address + push edi ; Save PM32 stack pointer + pushf +; +; Get Router Function Address +; + mov edi, eax + mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Seg + mov fs, ax + mov ax, (AMD_PRIVATE_PARAMS PTR ss:[edi]).Router_Off + mov gs, ax + + mov eax, AGESA_UNSUPPORTED ; Default return value +; +; If AMD_BRIDGE_32 EDX == 0 call oemCallout +; otherwise call FAR PTR EDX +; +; Critical: +; sp+2 - EDI aka PM32 stack address +; sp+4 - address of PM32Entry in PM32 +; + mov bx, fs + shl ebx, 16 + mov bx, gs + + .if (ebx == 0) + call LocalOemCalloutRouter + .else +; +; Make far call to Router function +; + push cs + push offset CalloutReturn + push ebx + retf +CalloutReturn: + .endif +; +; Restore PM32 esp from RM stack +; + popf + pop edi ; Our PM32 stack pointer + pop edx ; Our PM32 mode switch address + + mov ebx, CR0 + or bl, 1 ; CR0.PE set + mov CR0, ebx + + mov ebx, AGESA_SELECTOR_DATA32 + pushd AGESA_SELECTOR_CODE32 ; PM32 selector + push edx ; PM32 entry point + + DB 066h + retf ; Far jump to enter PM32 + +PM32Entry: +; +; END --- Don't unbalance the stack --- END +; We are now PM32, so remember MASM is assembling in 16-bit again +; + mov ss, bx + mov ds, bx + mov es, bx + mov fs, bx + mov gs, bx + + mov sp, di + pop di + pop dx + pop cx + pop di + pop si + pop bx + pop bp + ; EXIT AMD_CALLOUT_16 +ENDM |