diff options
Diffstat (limited to 'src/superio/smsc')
| -rw-r--r-- | src/superio/smsc/sio1036/sio1036.h | 2 | ||||
| -rw-r--r-- | src/superio/smsc/sio1036/sio1036_early_init.c | 26 |
2 files changed, 14 insertions, 14 deletions
diff --git a/src/superio/smsc/sio1036/sio1036.h b/src/superio/smsc/sio1036/sio1036.h index 37ef041aec..683dcd113e 100644 --- a/src/superio/smsc/sio1036/sio1036.h +++ b/src/superio/smsc/sio1036/sio1036.h @@ -20,7 +20,7 @@ #define UART_POWER_DOWN (1 << 7) #define LPT_POWER_DOWN (1 << 2) -#define IR_OUPUT_MUX (1 << 6) +#define IR_OUTPUT_MUX (1 << 6) #include <arch/io.h> #include <stdint.h> diff --git a/src/superio/smsc/sio1036/sio1036_early_init.c b/src/superio/smsc/sio1036/sio1036_early_init.c index b01151061c..1f2c9f2e5c 100644 --- a/src/superio/smsc/sio1036/sio1036_early_init.c +++ b/src/superio/smsc/sio1036/sio1036_early_init.c @@ -38,8 +38,8 @@ static u8 detect_sio1036_chip(unsigned port) pnp_devfn_t dev = PNP_DEV(port, SIO1036_SP1); unsigned data; - sio1036_enter_conf_state (dev); - data = pnp_read_config (dev, 0x0D); + sio1036_enter_conf_state(dev); + data = pnp_read_config(dev, 0x0D); sio1036_exit_conf_state(dev); /* Detect SMSC SIO1036 chip */ @@ -59,37 +59,37 @@ void sio1036_enable_serial(pnp_devfn_t dev, u16 iobase) if (detect_sio1036_chip(port) != 0) return; - sio1036_enter_conf_state (dev); + sio1036_enter_conf_state(dev); /* Enable SMSC UART 0 */ /* Valid configuration cycle */ - pnp_write_config (dev, 0x00, 0x28); + pnp_write_config(dev, 0x00, 0x28); /* PP power/mode/cr lock */ - pnp_write_config (dev, 0x01, 0x98 | LPT_POWER_DOWN); - pnp_write_config (dev, 0x02, 0x08 | UART_POWER_DOWN); + pnp_write_config(dev, 0x01, 0x98 | LPT_POWER_DOWN); + pnp_write_config(dev, 0x02, 0x08 | UART_POWER_DOWN); /*Auto power management*/ - pnp_write_config (dev, 0x07, 0x00 ); + pnp_write_config(dev, 0x07, 0x00); /*ECP FIFO threhod */ - pnp_write_config (dev, 0x0A, 0x00 | IR_OUPUT_MUX); + pnp_write_config(dev, 0x0A, 0x00 | IR_OUTPUT_MUX); /*GPIO direction register 2 */ - pnp_write_config (dev, 0x033, 0x00); + pnp_write_config(dev, 0x033, 0x00); /*UART Mode */ - pnp_write_config (dev, 0x0C, 0x02); + pnp_write_config(dev, 0x0C, 0x02); /* GPIO polarity regisgter 2 */ - pnp_write_config (dev, 0x034, 0x00); + pnp_write_config(dev, 0x034, 0x00); /* Enable SMSC UART 0 */ /*Set base io address */ - pnp_write_config (dev, 0x25, (u8)(iobase >> 2)); + pnp_write_config(dev, 0x25, (u8)(iobase >> 2)); /* Set UART IRQ onto 0x04 */ - pnp_write_config (dev, 0x28, 0x04); + pnp_write_config(dev, 0x28, 0x04); sio1036_exit_conf_state(dev); } |