diff options
Diffstat (limited to 'src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c')
-rw-r--r-- | src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c b/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c new file mode 100644 index 0000000000..7a38a33667 --- /dev/null +++ b/src/superio/smsc/fdc37m60x/fdc37m60x_early_serial.c @@ -0,0 +1,78 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <arch/romcc_io.h> +#include "fdc37m60x.h" + +/* The base address is 0x3f0 or 0x370, depending on the SYSOPT pin. */ +#define SIO_BASE 0x3f0 +#define SIO_INDEX SIO_BASE +#define SIO_DATA SIO_BASE+1 + +/* Global configuration registers. */ +#define FDC37M60X_CONFIG_REG_CC 0x02 /* Configure Control. */ +#define FDC37M60X_CONFIG_REG_LDN 0x07 /* Logical Device Number. */ +#define FDC37M60X_CONFIG_POWER_CONTROL 0x22 /* Power Control. */ +#define FDC37M60X_CONFIG_POWER_MGMT 0x23 /* Intelligent Power Mgmt. */ +#define FDC37M60X_CONFIG_OSC 0x24 /* OSC. */ + +#define FDC37M60X_CONFIGURATION_PORT 0x3f0 /* Write-only. */ + +/* The content of FDC37M60X_CONFIG_REG_LDN (index 0x07) must be set to the + LDN the register belongs to, before you can access the register. */ +static void fdc37m60x_sio_write(uint8_t ldn, uint8_t index, uint8_t value) +{ + outb(FDC37M60X_CONFIG_REG_LDN, SIO_BASE); + outb(ldn, SIO_DATA); + outb(index, SIO_BASE); + outb(value, SIO_DATA); +} + +/* Enable the peripheral devices on the FDC37M60X Super I/O chip. */ +static void fdc37m60x_enable_serial(device_t dev, unsigned iobase) +{ + /* (1) Enter the configuration state. */ + outb(0x55, FDC37M60X_CONFIGURATION_PORT); + + /* (2) Modify the data of configuration registers. */ + + /* Power on all devices by setting the respective bit. + Bits: 0 (FDC), 3 (PP), 4 (Com1), 5 (Com2). The rest is reserved. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_CONTROL, 0x39); + + /* Disable intelligent power management. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_POWER_MGMT, 0x00); + + /* Turn on OSC, turn on BRG clock. */ + fdc37m60x_sio_write(0x00, FDC37M60X_CONFIG_OSC, 0x04); + + /* Configure serial port 1. */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x60, 0x03); + fdc37m60x_sio_write(FDC37M60X_SP1, 0x61, 0xf8); /* I/O 0x3f8 */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x70, 0x04); /* IRQ 4 */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0xf0, 0x00); /* Normal */ + + /* Enable serial port 1. */ + fdc37m60x_sio_write(FDC37M60X_SP1, 0x30, 0x01); + + /* (3) Exit the configuration state. */ + outb(0xaa, FDC37M60X_CONFIGURATION_PORT); +} + |