diff options
Diffstat (limited to 'src/superio/ite/it8659e/acpi/superio.asl')
| -rw-r--r-- | src/superio/ite/it8659e/acpi/superio.asl | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/src/superio/ite/it8659e/acpi/superio.asl b/src/superio/ite/it8659e/acpi/superio.asl new file mode 100644 index 0000000000..45c2d131d6 --- /dev/null +++ b/src/superio/ite/it8659e/acpi/superio.asl @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * Include this file into a mainboard's DSDT _SB device tree and it will + * expose the IT8659E SuperIO and some of its functionality. + * + * It allows the change of IO ports, IRQs and DMA settings on logical + * devices, disabling and reenabling logical devices. + * + * LDN State + * 0x1 UARTA Implemented, tested + * 0x2 UARTB Implemented, tested + * 0x4 EC Implemented, tested + * 0x5 KBC Implemented, untested + * 0x6 MOUSE Implemented, untested + * 0x7 GPIO Implemented, tested + * 0xa CIR Not implemented + * + * Controllable through preprocessor defines: + * SUPERIO_DEV Device identifier for this SIO (e.g. SIO0) + * SUPERIO_PNP_BASE I/O address of the first PnP configuration register + * IT8659E_SHOW_UARTA If defined, UARTA will be exposed. + * IT8659E_SHOW_UARTB If defined, UARTB will be exposed. + * IT8659E_SHOW_KBC If defined, the KBC will be exposed. + * IT8659E_SHOW_PS2M If defined, PS/2 mouse support will be exposed. + * IT8659E_SHOW_EC If defined, the EC will be exposed. + * IT8659E_SHOW_GPIO If defined, the GPIO will be exposed. + */ + +#undef SUPERIO_CHIP_NAME +#define SUPERIO_CHIP_NAME IT8659E +#include <superio/acpi/pnp.asl> + +#undef PNP_DEFAULT_PSC +#define PNP_DEFAULT_PSC Return (0) /* no power management */ + +#define CONFIGURE_CONTROL CCTL + +Device (SUPERIO_DEV) { + Name (_HID, EisaId("PNP0A05")) + Name (_STR, Unicode("ITE IT8659E Super I/O")) + Name (_UID, SUPERIO_UID(SUPERIO_DEV,)) + + /* Mutex for accesses to the configuration ports */ + Mutex (CRMX, 1) + + /* SuperIO configuration ports */ + OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02) + Field (CREG, ByteAcc, NoLock, Preserve) + { + PNP_ADDR_REG, 8, + PNP_DATA_REG, 8 + } + IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve) + { + Offset (0x02), + CONFIGURE_CONTROL, 8, /* Global configure control */ + + Offset (0x07), + PNP_LOGICAL_DEVICE, 8, /* Logical device selector */ + + Offset (0x30), + PNP_DEVICE_ACTIVE, 1, /* Logical device activation */ + + Offset (0x60), + PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */ + PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */ + PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */ + PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */ + + Offset (0x70), + PNP_IRQ0, 8, /* First IRQ */ + } + + Method (_CRS) + { + /* Announce the used i/o ports to the OS */ + Return (ResourceTemplate () { + IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02) + }) + } + + #undef PNP_ENTER_MAGIC_1ST + #undef PNP_ENTER_MAGIC_2ND + #undef PNP_ENTER_MAGIC_3RD + #undef PNP_ENTER_MAGIC_4TH + #undef PNP_EXIT_MAGIC_1ST + #define PNP_ENTER_MAGIC_1ST 0x87 + #define PNP_ENTER_MAGIC_2ND 0x01 + #define PNP_ENTER_MAGIC_3RD 0x55 +#if SUPERIO_PNP_BASE == 0x2e + #define PNP_ENTER_MAGIC_4TH 0x55 +#else + #define PNP_ENTER_MAGIC_4TH 0xaa +#endif + #define PNP_EXIT_SPECIAL_REG CONFIGURE_CONTROL + #define PNP_EXIT_SPECIAL_VAL 0x02 + #include <superio/acpi/pnp_config.asl> + +#ifdef IT8659E_SHOW_UARTA + #undef SUPERIO_UART_LDN + #undef SUPERIO_UART_DDN + #undef SUPERIO_PNP_NO_DIS + #undef SUPERIO_UART_PM_REG + #undef SUPERIO_UART_PM_VAL + #undef SUPERIO_UART_PM_LDN + #define SUPERIO_UART_LDN 1 + #include <superio/acpi/pnp_uart.asl> +#endif + +#ifdef IT8659E_SHOW_UARTB + #undef SUPERIO_UART_LDN + #undef SUPERIO_UART_DDN + #undef SUPERIO_PNP_NO_DIS + #undef SUPERIO_UART_PM_REG + #undef SUPERIO_UART_PM_VAL + #undef SUPERIO_UART_PM_LDN + #define SUPERIO_UART_LDN 2 + #include <superio/acpi/pnp_uart.asl> +#endif + +#ifdef IT8659E_SHOW_KBC + #undef SUPERIO_KBC_LDN + #undef SUPERIO_KBC_PS2M + #undef SUPERIO_KBC_PS2LDN + #undef SUPERIO_PNP_NO_DIS + #define SUPERIO_KBC_LDN 5 +#ifdef IT8659E_SHOW_PS2M + #define SUPERIO_KBC_PS2LDN 6 +#endif + #include <superio/acpi/pnp_kbc.asl> +#endif + + +/* + * Generic setup for EC device. + * + * IT8659E_EC_IO0 The alignment and length of the first PnP i/o + * resource (comma separated, e.g. `0x02, 0x08`, + * optional) + * IT8659E_EC_IO1 The alignment and length of the second PnP i/o + * resource (comma separated, e.g. `0x02, 0x08`, + * optional) + * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled + */ +#ifdef IT8659E_SHOW_EC + #undef SUPERIO_PNP_HID + #undef SUPERIO_PNP_LDN + #undef SUPERIO_PNP_DDN + #undef SUPERIO_PNP_NO_DIS + #undef SUPERIO_PNP_PM_REG + #undef SUPERIO_PNP_PM_VAL + #undef SUPERIO_PNP_PM_LDN + #undef SUPERIO_PNP_IO0 + #undef SUPERIO_PNP_IO1 + #undef SUPERIO_PNP_IO2 + #undef SUPERIO_PNP_IRQ0 + #undef SUPERIO_PNP_IRQ1 + #undef SUPERIO_PNP_DMA + + #define SUPERIO_PNP_LDN 4 + #define SUPERIO_PNP_DDN "ITE IT8659E Environmental Controller" + +#ifdef IT8659E_EC_IO0 + #define SUPERIO_PNP_IO0 0x08, 0x08 +#endif + +#ifdef IT8659E_EC_IO1 + #define SUPERIO_PNP_IO1 0x08, 0x04 +#endif + +#ifdef IT8659E_EC_IRQ0 + #define SUPERIO_PNP_IRQ0 +#endif + + #include <superio/acpi/pnp_generic.asl> +#endif + +/* + * Generic setup for GPIO device. + * + * IT8659E_EC_IO0 The alignment and length of the first PnP i/o + * resource (comma separated, e.g. `0x02, 0x08`, + * optional) + * IT8659E_EC_IO1 The alignment and length of the second PnP i/o + * resource (comma separated, e.g. `0x02, 0x08`, + * optional) + * IT8659E_EC_IRQ0 If defined, the first PnP IRQ register is enabled + */ +#ifdef IT8659E_SHOW_GPIO + #undef SUPERIO_PNP_HID + #undef SUPERIO_PNP_LDN + #undef SUPERIO_PNP_DDN + #undef SUPERIO_PNP_NO_DIS + #undef SUPERIO_PNP_PM_REG + #undef SUPERIO_PNP_PM_VAL + #undef SUPERIO_PNP_PM_LDN + #undef SUPERIO_PNP_IO0 + #undef SUPERIO_PNP_IO1 + #undef SUPERIO_PNP_IO2 + #undef SUPERIO_PNP_IRQ0 + #undef SUPERIO_PNP_IRQ1 + #undef SUPERIO_PNP_DMA + + #define SUPERIO_PNP_LDN 7 + #define SUPERIO_PNP_DDN "ITE IT8659E GPIO" + #define SUPERIO_PNP_NO_DIS + +#ifdef IT8659E_GPIO_IO0 + #define SUPERIO_PNP_IO0 0x04, 0x04 +#endif + +#ifdef IT8659E_GPIO_IO1 + #define SUPERIO_PNP_IO1 0x01, 0x08 +#endif + #include <superio/acpi/pnp_generic.asl> +#endif + +} |