1 files changed, 100 insertions, 0 deletions
diff --git a/src/superio/ite/common/env_ctrl_chip.h b/src/superio/ite/common/env_ctrl_chip.h
new file mode 100644
index 0000000000..f01c574d47
--- /dev/null
+++ b/src/superio/ite/common/env_ctrl_chip.h
@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+ * Copyright (C) 2016 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SUPERIO_ITE_ENV_CTRL_CHIP_H
+#define SUPERIO_ITE_ENV_CTRL_CHIP_H
+
+#define ITE_EC_TMPIN_CNT	3
+#define ITE_EC_FAN_CNT		3
+
+/* Supported thermal mode on TMPINx */
+enum ite_ec_thermal_mode {
+	THERMAL_MODE_DISABLED = 0,
+	THERMAL_DIODE,
+	THERMAL_RESISTOR,
+};
+
+/* Bit mask for voltage pins VINx */
+enum ite_ec_voltage_pin {
+	VIN0 = 0x01,
+	VIN1 = 0x02,
+	VIN2 = 0x04,
+	VIN3 = 0x08,
+	VIN4 = 0x10,
+	VIN5 = 0x20,
+	VIN6 = 0x40,
+	VIN7 = 0x80,
+	VIN_ALL = 0xff
+};
+
+enum ite_ec_fan_mode {
+	FAN_IGNORE = 0,
+	FAN_MODE_ON,
+	FAN_MODE_OFF,
+	FAN_SMART_SOFTWARE,
+	FAN_SMART_AUTOMATIC,
+};
+
+struct ite_ec_fan_smartconfig {
+	u8 tmpin;	/* select TMPINx (1, 2 or 3)		*/
+	u8 tmp_off;	/* turn fan off below (°C)		*/
+	u8 tmp_start;	/* turn fan on above (°C)		*/
+	u8 tmp_full;	/* 100% duty cycle above (°C)		*/
+	u8 tmp_delta;	/* adapt fan speed when temperature
+			   changed by at least `tmp_delta`°C	*/
+	u8 smoothing;	/* enable smoothing			*/
+	u8 pwm_start;	/* start at this duty cycle (%)		*/
+	u8 slope;	/* increase duty cycle by `slope`%/°C	*/
+};
+
+struct ite_ec_fan_config {
+	enum ite_ec_fan_mode mode;
+	struct ite_ec_fan_smartconfig smart;
+};
+
+struct ite_ec_config {
+	/*
+	 * Enable external temperature sensor to use PECI GetTemp()
+	 * command and store in register TMPIN 1, 2, or 3.
+	 */
+	u8 peci_tmpin;
+
+	/*
+	 * Enable thermal mode on TMPINx.
+	 */
+	enum ite_ec_thermal_mode tmpin_mode[ITE_EC_TMPIN_CNT];
+
+	/*
+	 * Enable reading of voltage pins VINx.
+	 */
+	enum ite_ec_voltage_pin vin_mask;
+
+	/*
+	 * Enable a FAN in given mode.
+	 */
+	struct ite_ec_fan_config fan[ITE_EC_FAN_CNT];
+};
+
+/* Some shorthands for device trees */
+#define TMPIN1	ec.tmpin_mode[0]
+#define TMPIN2	ec.tmpin_mode[1]
+#define TMPIN3	ec.tmpin_mode[2]
+#define FAN1	ec.fan[0]
+#define FAN2	ec.fan[1]
+#define FAN3	ec.fan[2]
+
+#endif /* SUPERIO_ITE_ENV_CTRL_CHIP_H */