diff options
Diffstat (limited to 'src/southbridge/intel')
49 files changed, 474 insertions, 474 deletions
diff --git a/src/southbridge/intel/esb6300/esb6300_ehci.c b/src/southbridge/intel/esb6300/esb6300_ehci.c index 313504866e..8c20c0325f 100644 --- a/src/southbridge/intel/esb6300/esb6300_ehci.c +++ b/src/southbridge/intel/esb6300/esb6300_ehci.c @@ -9,12 +9,12 @@ static void ehci_init(struct device *dev) { uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_ide.c b/src/southbridge/intel/esb6300/esb6300_ide.c index eca8a3fefa..e56393722a 100644 --- a/src/southbridge/intel/esb6300/esb6300_ide.c +++ b/src/southbridge/intel/esb6300/esb6300_ide.c @@ -26,7 +26,7 @@ static void ide_init(struct device *dev) word |= (1 << 15); pci_write_config16(dev, 0x42, word); #endif - printk_debug("IDE Enabled\n"); + printk(BIOS_DEBUG, "IDE Enabled\n"); } static void esb6300_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_lpc.c b/src/southbridge/intel/esb6300/esb6300_lpc.c index 09caeb729f..c25771aa0a 100644 --- a/src/southbridge/intel/esb6300/esb6300_lpc.c +++ b/src/southbridge/intel/esb6300/esb6300_lpc.c @@ -288,7 +288,7 @@ static void lpc_init(struct device *dev) byte |= 1; } pci_write_config8(dev, 0xa4, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up the PIRQ */ esb6300_pirq_init(dev); diff --git a/src/southbridge/intel/esb6300/esb6300_sata.c b/src/southbridge/intel/esb6300/esb6300_sata.c index 0bedd93a9a..c26b7c4d12 100644 --- a/src/southbridge/intel/esb6300/esb6300_sata.c +++ b/src/southbridge/intel/esb6300/esb6300_sata.c @@ -13,7 +13,7 @@ static void sata_init(struct device *dev) /* Enable SATA devices */ - printk_debug("SATA init\n"); + printk(BIOS_DEBUG, "SATA init\n"); /* SATA configuration */ pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x09, 0x8f); @@ -41,7 +41,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, 0xa0, 0x0040); pci_write_config32(dev, 0xa4, 0x00220043); - printk_debug("SATA Enabled\n"); + printk(BIOS_DEBUG, "SATA Enabled\n"); } static void esb6300_sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/esb6300/esb6300_uhci.c b/src/southbridge/intel/esb6300/esb6300_uhci.c index 9184ed24e4..10b1dfa1cc 100644 --- a/src/southbridge/intel/esb6300/esb6300_uhci.c +++ b/src/southbridge/intel/esb6300/esb6300_uhci.c @@ -10,13 +10,13 @@ static void uhci_init(struct device *dev) uint32_t cmd; #if 1 - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i3100/i3100_lpc.c b/src/southbridge/intel/i3100/i3100_lpc.c index 2d3b1fbf6f..4612c916d2 100644 --- a/src/southbridge/intel/i3100/i3100_lpc.c +++ b/src/southbridge/intel/i3100/i3100_lpc.c @@ -232,7 +232,7 @@ static void i3100_power_options(device_t dev) { /* minimum asssertion is 1 to 2 RTCCLK */ reg8 &= ~(1 << 3); pci_write_config8(dev, GEN_PMCON_3, reg8); - printk_info("set power %s after power fail\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ reg8 = inb(0x61); @@ -251,11 +251,11 @@ static void i3100_power_options(device_t dev) { get_option(&nmi_option, "nmi"); if (nmi_option) { /* Set NMI. */ - printk_info ("NMI sources enabled.\n"); + printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); } else { /* Can't mask NMI from PCI-E and NMI_NOW */ - printk_info ("NMI sources disabled.\n"); + printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); } outb(reg8, 0x70); diff --git a/src/southbridge/intel/i3100/i3100_pciexp_portb.c b/src/southbridge/intel/i3100/i3100_pciexp_portb.c index a987da02f5..31502a46de 100644 --- a/src/southbridge/intel/i3100/i3100_pciexp_portb.c +++ b/src/southbridge/intel/i3100/i3100_pciexp_portb.c @@ -46,12 +46,12 @@ static unsigned int pcie_scan_bridge(struct device *dev, unsigned int max) int flag = 0; do { val = pci_read_config16(dev, PCIE_LSTS); - printk_debug("pcie portb link status: %02x\n", val); + printk(BIOS_DEBUG, "pcie portb link status: %02x\n", val); if ((val & (1<<10)) && (!flag)) { /* training error */ ctl = pci_read_config16(dev, PCIE_LCTL); pci_write_config16(dev, PCIE_LCTL, (ctl | (1<<5))); val = pci_read_config16(dev, PCIE_LSTS); - printk_debug("pcie portb reset link status: %02x\n", val); + printk(BIOS_DEBUG, "pcie portb reset link status: %02x\n", val); flag=1; hard_reset(); } diff --git a/src/southbridge/intel/i3100/i3100_sata.c b/src/southbridge/intel/i3100/i3100_sata.c index a124d10d11..cafb68fe0d 100644 --- a/src/southbridge/intel/i3100/i3100_sata.c +++ b/src/southbridge/intel/i3100/i3100_sata.c @@ -53,7 +53,7 @@ static void sata_init(struct device *dev) ahci = (pci_read_config8(dev, SATA_MAP) >> 6) & 0x03; /* Enable SATA devices */ - printk_info("SATA init (%s mode)\n", ahci ? "AHCI" : "Legacy"); + printk(BIOS_INFO, "SATA init (%s mode)\n", ahci ? "AHCI" : "Legacy"); if(ahci) { /* AHCI mode */ @@ -97,7 +97,7 @@ static void sata_init(struct device *dev) pci_write_config8(dev, SATA_PCS + 1, 0x0f); } - printk_debug("SATA Enabled\n"); + printk(BIOS_DEBUG, "SATA Enabled\n"); } static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82371eb/i82371eb_ide.c b/src/southbridge/intel/i82371eb/i82371eb_ide.c index 0e91839fb2..f1b618fa71 100644 --- a/src/southbridge/intel/i82371eb/i82371eb_ide.c +++ b/src/southbridge/intel/i82371eb/i82371eb_ide.c @@ -48,14 +48,14 @@ static void ide_init_enable(struct device *dev) reg16 = pci_read_config16(dev, IDETIM_PRI); reg16 = ONOFF(conf->ide0_enable, reg16, IDE_DECODE_ENABLE); pci_write_config16(dev, IDETIM_PRI, reg16); - printk_debug("IDE: %s: %s\n", "Primary IDE interface", + printk(BIOS_DEBUG, "IDE: %s: %s\n", "Primary IDE interface", conf->ide0_enable ? "on" : "off"); /* Enable/disable the secondary IDE interface. */ reg16 = pci_read_config16(dev, IDETIM_SEC); reg16 = ONOFF(conf->ide1_enable, reg16, IDE_DECODE_ENABLE); pci_write_config16(dev, IDETIM_SEC, reg16); - printk_debug("IDE: %s: %s\n", "Secondary IDE interface", + printk(BIOS_DEBUG, "IDE: %s: %s\n", "Secondary IDE interface", conf->ide1_enable ? "on" : "off"); /* Enable access to the legacy IDE ports (both primary and secondary), @@ -67,7 +67,7 @@ static void ide_init_enable(struct device *dev) reg16 = ONOFF(conf->ide_legacy_enable, reg16, (PCI_COMMAND_IO | PCI_COMMAND_MASTER)); pci_write_config16(dev, PCI_COMMAND, reg16); - printk_debug("IDE: Access to legacy IDE ports: %s\n", + printk(BIOS_DEBUG, "IDE: Access to legacy IDE ports: %s\n", conf->ide_legacy_enable ? "on" : "off"); } } @@ -96,10 +96,10 @@ static void ide_init_udma33(struct device *dev) reg8 = ONOFF(conf->ide0_drive1_udma33_enable, reg8, PSDE1); pci_write_config8(dev, UDMACTL, reg8); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Primary IDE interface", 0, conf->ide0_drive0_udma33_enable ? "on" : "off"); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Primary IDE interface", 1, conf->ide0_drive1_udma33_enable ? "on" : "off"); } @@ -111,10 +111,10 @@ static void ide_init_udma33(struct device *dev) reg8 = ONOFF(conf->ide1_drive1_udma33_enable, reg8, SSDE1); pci_write_config8(dev, UDMACTL, reg8); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Secondary IDE interface", 0, conf->ide1_drive0_udma33_enable ? "on" : "off"); - printk_debug("IDE: %s, drive %d: UDMA/33: %s\n", + printk(BIOS_DEBUG, "IDE: %s, drive %d: UDMA/33: %s\n", "Secondary IDE interface", 1, conf->ide1_drive1_udma33_enable ? "on" : "off"); } diff --git a/src/southbridge/intel/i82801ax/i82801ax_ide.c b/src/southbridge/intel/i82801ax/i82801ax_ide.c index c13fb4d34a..2daa986bd4 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_ide.c +++ b/src/southbridge/intel/i82801ax/i82801ax_ide.c @@ -43,9 +43,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -54,9 +54,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801ax/i82801ax_lpc.c b/src/southbridge/intel/i82801ax/i82801ax_lpc.c index e42bac3449..3f0323bd0e 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_lpc.c +++ b/src/southbridge/intel/i82801ax/i82801ax_lpc.c @@ -92,14 +92,14 @@ void i82801ax_enable_apic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -189,7 +189,7 @@ static void i82801ax_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c index a3f7e7c9fd..32a1085a76 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c +++ b/src/southbridge/intel/i82801ax/i82801ax_usb_ehci.c @@ -30,11 +30,11 @@ static void usb_ehci_init(struct device *dev) /* TODO: Is any special init really needed? */ uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, diff --git a/src/southbridge/intel/i82801ax/i82801ax_watchdog.c b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c index aea10e1c7b..fb45f521c5 100644 --- a/src/southbridge/intel/i82801ax/i82801ax_watchdog.c +++ b/src/southbridge/intel/i82801ax/i82801ax_watchdog.c @@ -50,5 +50,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH Watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH Watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82801bx/i82801bx_ide.c b/src/southbridge/intel/i82801bx/i82801bx_ide.c index 9bfab00399..ffbaf80dbd 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_ide.c +++ b/src/southbridge/intel/i82801bx/i82801bx_ide.c @@ -43,9 +43,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -54,9 +54,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801bx/i82801bx_lpc.c b/src/southbridge/intel/i82801bx/i82801bx_lpc.c index 0d7e09c931..c63de08c2a 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_lpc.c +++ b/src/southbridge/intel/i82801bx/i82801bx_lpc.c @@ -92,14 +92,14 @@ void i82801bx_enable_apic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -189,7 +189,7 @@ static void i82801bx_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c index 1e885e920d..29034444b4 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c +++ b/src/southbridge/intel/i82801bx/i82801bx_usb_ehci.c @@ -30,11 +30,11 @@ static void usb_ehci_init(struct device *dev) /* TODO: Is any special init really needed? */ uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, diff --git a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c index aea10e1c7b..fb45f521c5 100644 --- a/src/southbridge/intel/i82801bx/i82801bx_watchdog.c +++ b/src/southbridge/intel/i82801bx/i82801bx_watchdog.c @@ -50,5 +50,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH Watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH Watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82801cx/i82801cx_ide.c b/src/southbridge/intel/i82801cx/i82801cx_ide.c index 2506b2f329..74c442c52c 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_ide.c +++ b/src/southbridge/intel/i82801cx/i82801cx_ide.c @@ -18,7 +18,7 @@ static void ide_init(struct device *dev) if (enable_primary) { /* Enable first ide interface */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0 "); + printk(BIOS_DEBUG, "IDE0 "); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -27,7 +27,7 @@ static void ide_init(struct device *dev) if (enable_secondary) { /* Enable secondary ide interface */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1 "); + printk(BIOS_DEBUG, "IDE1 "); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801cx/i82801cx_lpc.c b/src/southbridge/intel/i82801cx/i82801cx_lpc.c index 4785242a79..9ac3e8326b 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_lpc.c +++ b/src/southbridge/intel/i82801cx/i82801cx_lpc.c @@ -35,7 +35,7 @@ void i82801cx_enable_ioapic( struct device *dev) dword |= (1 << 1); /* delay transaction enable */ dword |= (1 << 2); /* DMA collection buf enable */ pci_write_config32(dev, GEN_CNTL, dword); - printk_debug("ioapic southbridge enabled %x\n",dword); + printk(BIOS_DEBUG, "ioapic southbridge enabled %x\n",dword); // Must program the APIC's ID before using it @@ -45,7 +45,7 @@ void i82801cx_enable_ioapic( struct device *dev) // Hang if the ID didn't take (chip not present?) *ioapic_index = 0; dword = *ioapic_data; - printk_debug("Southbridge apic id = %x\n", (dword>>24) & 0xF); + printk(BIOS_DEBUG, "Southbridge apic id = %x\n", (dword>>24) & 0xF); if(dword != (2<<24)) die(""); @@ -105,7 +105,7 @@ void i82801cx_rtc_init(struct device *dev) pmcon3 |= SLEEP_AFTER_POWER_FAIL; } pci_write_config8(dev, GEN_PMCON_3, pmcon3); - printk_info("set power %s after power fail\n", + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off"); // See if the Safe Mode jumper is set @@ -177,7 +177,7 @@ static void lpc_init(struct device *dev) else byte |= 1; // Return to S5 pci_write_config8(dev, GEN_PMCON_3, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up NMI on errors */ byte = inb(0x61); diff --git a/src/southbridge/intel/i82801cx/i82801cx_usb.c b/src/southbridge/intel/i82801cx/i82801cx_usb.c index 258581a78b..00b668d023 100644 --- a/src/southbridge/intel/i82801cx/i82801cx_usb.c +++ b/src/southbridge/intel/i82801cx/i82801cx_usb.c @@ -10,14 +10,14 @@ static void usb_init(struct device *dev) #if 0 uint32_t cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i82801dx/i82801dx_ac97.c b/src/southbridge/intel/i82801dx/i82801dx_ac97.c index 10b100beee..ccfccd3421 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_ac97.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ac97.c @@ -101,7 +101,7 @@ static int ac97_semaphore(void) timeout--; } while ((reg8 & 1) && timeout); if (! timeout) { - printk_debug("Timeout!\n"); + printk(BIOS_DEBUG, "Timeout!\n"); } return (!timeout); @@ -123,7 +123,7 @@ static void ac97_audio_init(struct device *dev) u32 reg32; int i; - printk_debug("Initializing AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n"); /* top 16 bits are zero, so don't read them */ nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe; @@ -142,7 +142,7 @@ static void ac97_audio_init(struct device *dev) reg32 = inl(nabmbar + GLOB_STA); if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) { /* Primary Codec not found */ - printk_debug("No primary codec. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n"); return; } @@ -152,7 +152,7 @@ static void ac97_audio_init(struct device *dev) outw(0x8000, nambar + MASTER_VOL); ac97_semaphore(); if (inw(nambar + MASTER_VOL) != 0x8000) { - printk_debug("Codec not programmable. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n"); return; } diff --git a/src/southbridge/intel/i82801dx/i82801dx_ide.c b/src/southbridge/intel/i82801dx/i82801dx_ide.c index bf879a9c3c..75350da058 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_ide.c +++ b/src/southbridge/intel/i82801dx/i82801dx_ide.c @@ -40,9 +40,9 @@ static void ide_init(struct device *dev) if (!config || config->ide0_enable) { /* Enable primary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE0: Primary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE0: Primary IDE interface is enabled\n"); } else { - printk_info("IDE0: Primary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE0: Primary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -51,9 +51,9 @@ static void ide_init(struct device *dev) if (!config || config->ide1_enable) { /* Enable secondary IDE interface. */ ideTimingConfig |= IDE_DECODE_ENABLE; - printk_debug("IDE1: Secondary IDE interface is enabled\n"); + printk(BIOS_DEBUG, "IDE1: Secondary IDE interface is enabled\n"); } else { - printk_info("IDE1: Secondary IDE interface is disabled\n"); + printk(BIOS_INFO, "IDE1: Secondary IDE interface is disabled\n"); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); } diff --git a/src/southbridge/intel/i82801dx/i82801dx_lpc.c b/src/southbridge/intel/i82801dx/i82801dx_lpc.c index a3130e164e..ae522c310b 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_lpc.c +++ b/src/southbridge/intel/i82801dx/i82801dx_lpc.c @@ -53,14 +53,14 @@ static void i82801dx_enable_ioapic(struct device *dev) reg32 |= (1 << 1); /* Delayed transaction enable */ reg32 |= (1 << 2); /* DMA collection buffer enable */ pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("IOAPIC Southbridge enabled %x\n", reg32); + printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); *ioapic_index = 0; *ioapic_data = (1 << 25); *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", reg32); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); if (reg32 != (1 << 25)) die("APIC Error\n"); @@ -107,7 +107,7 @@ static void i82801dx_power_options(device_t dev) * 1 == S5 Soft Off */ pci_write_config8(dev, GEN_PMCON_3, pwr_on ? 0 : 1); - printk_info("Set power %s if power fails\n", pwr_on ? "on" : "off"); + printk(BIOS_INFO, "Set power %s if power fails\n", pwr_on ? "on" : "off"); /* Set up NMI on errors. */ byte = inb(0x61); @@ -198,7 +198,7 @@ static void enable_hpet(struct device *dev) reg32 |= (code << 15); pci_write_config32(dev, GEN_CNTL, reg32); - printk_debug("Enabling HPET @0x%x\n", HPET_ADDR | (code << 12)); + printk(BIOS_DEBUG, "Enabling HPET @0x%x\n", HPET_ADDR | (code << 12)); } static void lpc_init(struct device *dev) diff --git a/src/southbridge/intel/i82801dx/i82801dx_smi.c b/src/southbridge/intel/i82801dx/i82801dx_smi.c index a536d8ba76..a1277b03a4 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_smi.c +++ b/src/southbridge/intel/i82801dx/i82801dx_smi.c @@ -63,16 +63,16 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_debug("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_debug("WAK "); - if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_debug("RTC "); - if (pm1_sts & (1 << 8)) printk_debug("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_debug("GBL "); - if (pm1_sts & (1 << 4)) printk_debug("BM "); - if (pm1_sts & (1 << 0)) printk_debug("TMROF "); - printk_debug("\n"); + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); } /** @@ -92,28 +92,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -135,25 +135,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -175,11 +175,11 @@ static u16 reset_alt_gp_smi_status(void) static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) { int i; - printk_debug("ALT_GP_SMI_STS: "); + printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); for (i=15; i<= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16)); + if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } @@ -205,21 +205,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } @@ -243,14 +243,14 @@ static void smm_relocate(void) u32 smi_en; u16 pm1_en; - printk_debug("Initializing SMM handler..."); + printk(BIOS_DEBUG, "Initializing SMM handler..."); pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; - printk_spew(" ... pmbase = 0x%04x\n", pmbase); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); smi_en = inl(pmbase + SMI_EN); if (smi_en & APMC_EN) { - printk_info("SMI# handler already enabled?\n"); + printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } @@ -258,7 +258,7 @@ static void smm_relocate(void) memcpy((void *)0x38000, &smm_relocation_start, &smm_relocation_end - &smm_relocation_start); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); dump_smi_status(reset_smi_status()); dump_pm1_status(reset_pm1_status()); dump_gpe0_status(reset_gpe0_status()); @@ -314,7 +314,7 @@ static void smm_relocate(void) */ /* raise an SMI interrupt */ - printk_spew(" ... raise SMI#\n"); + printk(BIOS_SPEW, " ... raise SMI#\n"); outb(0x00, 0xb2); } @@ -349,7 +349,7 @@ void smm_lock(void) * After running this function, only a full reset can * make the SMM registers writable again. */ - printk_debug("Locking SMM.\n"); + printk(BIOS_DEBUG, "Locking SMM.\n"); pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); } diff --git a/src/southbridge/intel/i82801dx/i82801dx_smihandler.c b/src/southbridge/intel/i82801dx/i82801dx_smihandler.c index eda2691ecf..107cf80aea 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_smihandler.c +++ b/src/southbridge/intel/i82801dx/i82801dx_smihandler.c @@ -83,18 +83,18 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_spew("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_spew("WAK "); - if (pm1_sts & (1 << 14)) printk_spew("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_spew("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_spew("RTC "); - if (pm1_sts & (1 << 8)) printk_spew("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_spew("GBL "); - if (pm1_sts & (1 << 4)) printk_spew("BM "); - if (pm1_sts & (1 << 0)) printk_spew("TMROF "); - printk_spew("\n"); + printk(BIOS_SPEW, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); + printk(BIOS_SPEW, "\n"); int reg16 = inw(pmbase + PM1_EN); - printk_spew("PM1_EN: %x\n", reg16); + printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); } /** @@ -114,28 +114,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -157,25 +157,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -200,21 +200,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } /* We are using PCIe accesses for now @@ -227,7 +227,7 @@ int southbridge_io_trap_handler(int smif) { switch (smif) { case 0x32: - printk_debug("OS Init\n"); + printk(BIOS_DEBUG, "OS Init\n"); /* gnvs->smif: * On success, the IO Trap Handler returns 0 * On failure, the IO Trap Handler returns a value != 0 @@ -306,23 +306,23 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* Figure out SLP_TYP */ reg32 = inl(pmbase + PM1_CNT); - printk_spew("SMI#: SLP = 0x%08x\n", reg32); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); slp_typ = (reg32 >> 10) & 7; /* Next, do the deed. */ switch (slp_typ) { - case 0: printk_debug("SMI#: Entering S0 (On)\n"); break; - case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break; + case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; + case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; case 5: - printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); /* Invalidate the cache before going to S3 */ wbinvd(); break; - case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break; + case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; case 7: - printk_debug("SMI#: Entering S5 (Soft Power off)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); outl(0, pmbase + GPE0_EN); @@ -340,7 +340,7 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); break; - default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break; + default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; } /* Write back to the SLP register to cause the originally intended @@ -375,51 +375,51 @@ static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("C-state control\n"); + printk(BIOS_DEBUG, "C-state control\n"); break; case PST_CONTROL: /* Calling this function seems to cause * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("P-state control\n"); + printk(BIOS_DEBUG, "P-state control\n"); break; case ACPI_DISABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl &= ~SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI disabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case ACPI_ENABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl |= SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI enabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case GNVS_UPDATE: if (smm_initialized) { - printk_debug("SMI#: SMM structures already initialized!\n"); + printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); return; } gnvs = *(global_nvs_t **)0x500; tcg = *(void **)0x504; smi1 = *(void **)0x508; smm_initialized = 1; - printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); + printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); break; case MBI_UPDATE: // FIXME if (mbi_initialized) { - printk_debug("SMI#: mbi already registered!\n"); + printk(BIOS_DEBUG, "SMI#: mbi already registered!\n"); return; } mbi = *(void **)0x500; mbi_len = *(u32 *)0x504; mbi_initialized = 1; - printk_debug("SMI#: Registered MBI at %p (%d bytes)\n", mbi, mbi_len); + printk(BIOS_DEBUG, "SMI#: Registered MBI at %p (%d bytes)\n", mbi, mbi_len); break; default: - printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8); + printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8); } } @@ -463,7 +463,7 @@ static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_ mainboard_smi_gpi(reg16); } else { if (reg16) - printk_debug("GPI (mask %04x)\n",reg16); + printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); } } @@ -477,7 +477,7 @@ static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_s if ((reg32 & MCSMI_EN) == 0) return; - printk_debug("Microcontroller SMI.\n"); + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); } @@ -508,12 +508,12 @@ static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_ * resolute answer would be to power down the * box. */ - printk_debug("Switching back to RO\n"); + printk(BIOS_DEBUG, "Switching back to RO\n"); pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ /* Handle TCO timeout */ - printk_debug("TCO Timeout.\n"); + printk(BIOS_DEBUG, "TCO Timeout.\n"); } else if (!tco_sts) { dump_tco_status(tco_sts); } @@ -529,7 +529,7 @@ static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *s if ((reg32 & PERIODIC_EN) == 0) return; - printk_debug("Periodic SMI.\n"); + printk(BIOS_DEBUG, "Periodic SMI.\n"); } static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save) @@ -563,7 +563,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st /* IOTRAP(0) SMIC */ if (IOTRAP(0)) { if (!(trap_cycle & (1 << 24))) { // It's a write - printk_debug("SMI1 command\n"); + printk(BIOS_DEBUG, "SMI1 command\n"); data = RCBA32(0x1e18); data &= mask; // if (smi1) @@ -573,16 +573,16 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st // Fall through to debug } - printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i); - printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf); - printk_debug(" MASK = 0x%08x\n", mask); - printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ data = RCBA32(0x1e18); - printk_debug(" iotrap written data = 0x%08x\n", data); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #endif #undef IOTRAP @@ -655,7 +655,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav if (southbridge_smi[i]) southbridge_smi[i](node, state_save); else { - printk_debug("SMI_STS[%d] occured, but no " + printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " "handler available.\n", i); dump = 1; } diff --git a/src/southbridge/intel/i82801dx/i82801dx_usb.c b/src/southbridge/intel/i82801dx/i82801dx_usb.c index 48b990d1ac..be44a293dc 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_usb.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb.c @@ -29,12 +29,12 @@ static void usb_init(struct device *dev) { u32 cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static struct device_operations usb_ops = { diff --git a/src/southbridge/intel/i82801dx/i82801dx_usb2.c b/src/southbridge/intel/i82801dx/i82801dx_usb2.c index 96bbd7748d..a0ea5f64e1 100644 --- a/src/southbridge/intel/i82801dx/i82801dx_usb2.c +++ b/src/southbridge/intel/i82801dx/i82801dx_usb2.c @@ -29,12 +29,12 @@ static void usb2_init(struct device *dev) { u32 cmd; - printk_debug("USB: Setting up controller.. "); + printk(BIOS_DEBUG, "USB: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static struct device_operations usb2_ops = { diff --git a/src/southbridge/intel/i82801ex/i82801ex_ehci.c b/src/southbridge/intel/i82801ex/i82801ex_ehci.c index 60b1f304c2..17da5d94c6 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_ehci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ehci.c @@ -9,12 +9,12 @@ static void ehci_init(struct device *dev) { uint32_t cmd; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801ex/i82801ex_ide.c b/src/southbridge/intel/i82801ex/i82801ex_ide.c index b4d2311e0b..cd622907ab 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_ide.c +++ b/src/southbridge/intel/i82801ex/i82801ex_ide.c @@ -13,7 +13,7 @@ static void ide_init(struct device *dev) pci_write_config8(dev, 0x48, 0x05); pci_write_config16(dev, 0x4a, 0x0101); pci_write_config16(dev, 0x54, 0x5055); - printk_debug("IDE Enabled\n"); + printk(BIOS_DEBUG, "IDE Enabled\n"); } static void i82801ex_ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801ex/i82801ex_lpc.c b/src/southbridge/intel/i82801ex/i82801ex_lpc.c index b9d19074a4..b97af3860a 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_lpc.c +++ b/src/southbridge/intel/i82801ex/i82801ex_lpc.c @@ -233,7 +233,7 @@ static void enable_hpet(struct device *dev) dword |= (code<<15); pci_write_config32(dev, GEN_CNTL, dword); - printk_debug("enabling HPET @0x%lx\n", hpet_address | (code <<12) ); + printk(BIOS_DEBUG, "enabling HPET @0x%lx\n", hpet_address | (code <<12) ); } static void lpc_init(struct device *dev) @@ -267,7 +267,7 @@ static void lpc_init(struct device *dev) byte |= 1; } pci_write_config8(dev, 0xa4, byte); - printk_info("set power %s after power fail\n", pwr_on?"on":"off"); + printk(BIOS_INFO, "set power %s after power fail\n", pwr_on?"on":"off"); /* Set up the PIRQ */ i82801ex_pirq_init(dev); diff --git a/src/southbridge/intel/i82801ex/i82801ex_sata.c b/src/southbridge/intel/i82801ex/i82801ex_sata.c index 73f5773fd5..a490f2a8c3 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_sata.c +++ b/src/southbridge/intel/i82801ex/i82801ex_sata.c @@ -7,7 +7,7 @@ static void sata_init(struct device *dev) { - printk_debug("SATA init\n"); + printk(BIOS_DEBUG, "SATA init\n"); /* SATA configuration */ pci_write_config8(dev, 0x04, 0x07); pci_write_config8(dev, 0x09, 0x8f); diff --git a/src/southbridge/intel/i82801ex/i82801ex_uhci.c b/src/southbridge/intel/i82801ex/i82801ex_uhci.c index 177b82089c..fe80079d09 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_uhci.c +++ b/src/southbridge/intel/i82801ex/i82801ex_uhci.c @@ -10,13 +10,13 @@ static void uhci_init(struct device *dev) uint32_t cmd; #if 1 - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); cmd = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif } diff --git a/src/southbridge/intel/i82801ex/i82801ex_watchdog.c b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c index 44a701823a..205ea87d94 100644 --- a/src/southbridge/intel/i82801ex/i82801ex_watchdog.c +++ b/src/southbridge/intel/i82801ex/i82801ex_watchdog.c @@ -24,6 +24,6 @@ void watchdog_off(void) /* Clear TCO timeout status */ outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("Watchdog ICH5 disabled\r\n"); + printk(BIOS_DEBUG, "Watchdog ICH5 disabled\r\n"); } diff --git a/src/southbridge/intel/i82801gx/i82801gx_ac97.c b/src/southbridge/intel/i82801gx/i82801gx_ac97.c index f1e410715b..602014bb2e 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_ac97.c +++ b/src/southbridge/intel/i82801gx/i82801gx_ac97.c @@ -101,7 +101,7 @@ static int ac97_semaphore(void) timeout--; } while ((reg8 & 1) && timeout); if (! timeout) { - printk_debug("Timeout!\n"); + printk(BIOS_DEBUG, "Timeout!\n"); } return (!timeout); @@ -123,7 +123,7 @@ static void ac97_audio_init(struct device *dev) u32 reg32; int i; - printk_debug("Initializing AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Initializing AC'97 Audio.\n"); /* top 16 bits are zero, so don't read them */ nabmbar = pci_read_config16(dev, NABMBAR) & 0xfffe; @@ -142,7 +142,7 @@ static void ac97_audio_init(struct device *dev) reg32 = inl(nabmbar + GLOB_STA); if ((reg32 & ((1 << 28) | (1 << 9) | (1 << 8))) == 0) { /* Primary Codec not found */ - printk_debug("No primary codec. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "No primary codec. Disabling AC'97 Audio.\n"); return; } @@ -152,7 +152,7 @@ static void ac97_audio_init(struct device *dev) outw(0x8000, nambar + MASTER_VOL); ac97_semaphore(); if (inw(nambar + MASTER_VOL) != 0x8000) { - printk_debug("Codec not programmable. Disabling AC'97 Audio.\n"); + printk(BIOS_DEBUG, "Codec not programmable. Disabling AC'97 Audio.\n"); return; } diff --git a/src/southbridge/intel/i82801gx/i82801gx_azalia.c b/src/southbridge/intel/i82801gx/i82801gx_azalia.c index 60b7334c2c..a4cf14c4f9 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_azalia.c +++ b/src/southbridge/intel/i82801gx/i82801gx_azalia.c @@ -86,7 +86,7 @@ no_codec: /* Codec Not found */ /* Put HDA back in reset (BAR + 0x8) [0] */ set_bits(base + 0x08, 1, 0); - printk_debug("Azalia: No codec!\n"); + printk(BIOS_DEBUG, "Azalia: No codec!\n"); return 0; } @@ -170,7 +170,7 @@ static void codec_init(struct device *dev, u32 base, int addr) u32 verb_size; int i; - printk_debug("Azalia: Initializing codec #%d\n", addr); + printk(BIOS_DEBUG, "Azalia: Initializing codec #%d\n", addr); /* 1 */ if (wait_for_ready(base) == -1) @@ -185,14 +185,14 @@ static void codec_init(struct device *dev, u32 base, int addr) reg32 = read32(base + 0x64); /* 2 */ - printk_debug("Azalia: codec viddid: %08x\n", reg32); + printk(BIOS_DEBUG, "Azalia: codec viddid: %08x\n", reg32); verb_size = find_verb(dev, reg32, &verb); if (!verb_size) { - printk_debug("Azalia: No verb!\n"); + printk(BIOS_DEBUG, "Azalia: No verb!\n"); return; } - printk_debug("Azalia: verb_size: %d\n", verb_size); + printk(BIOS_DEBUG, "Azalia: verb_size: %d\n", verb_size); /* 3 */ for (i = 0; i < verb_size; i++) { @@ -204,7 +204,7 @@ static void codec_init(struct device *dev, u32 base, int addr) if (wait_for_valid(base) == -1) return; } - printk_debug("Azalia: verb loaded.\n"); + printk(BIOS_DEBUG, "Azalia: verb loaded.\n"); } static void codecs_init(struct device *dev, u32 base, u32 codec_mask) @@ -275,7 +275,7 @@ static void azalia_init(struct device *dev) pci_write_config8(dev, 0x40, reg8); mdelay(1); reg8 = pci_read_config8(dev, 0x40); - printk_debug("Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97"); + printk(BIOS_DEBUG, "Azalia: codec type: %s\n", (reg8 & (1 << 1))?"Azalia":"AC97"); // reg8 = pci_read_config8(dev, 0x40); // Audio Control @@ -304,11 +304,11 @@ static void azalia_init(struct device *dev) // NOTE this will break as soon as the Azalia get's a bar above // 4G. Is there anything we can do about it? base = (u32)res->base; - printk_debug("Azalia: base = %08x\n", (u32)base); + printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)base); codec_mask = codec_detect(base); if (codec_mask) { - printk_debug("Azalia: codec_mask = %02x\n", codec_mask); + printk(BIOS_DEBUG, "Azalia: codec_mask = %02x\n", codec_mask); codecs_init(dev, base, codec_mask); } } diff --git a/src/southbridge/intel/i82801gx/i82801gx_ide.c b/src/southbridge/intel/i82801gx/i82801gx_ide.c index 28a1c055ea..84b50d6535 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_ide.c +++ b/src/southbridge/intel/i82801gx/i82801gx_ide.c @@ -35,9 +35,9 @@ static void ide_init(struct device *dev) /* Get the chip configuration */ config_t *config = dev->chip_info; - printk_debug("i82801gx_ide: initializing... "); + printk(BIOS_DEBUG, "i82801gx_ide: initializing... "); if (config == NULL) { - printk_err("\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n"); + printk(BIOS_ERR, "\ni82801gx_ide: Not mentioned in mainboard's Config.lb!\n"); // Trying to set somewhat safe defaults instead of bailing out. enable_primary = enable_secondary = 1; } else { @@ -61,7 +61,7 @@ static void ide_init(struct device *dev) ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 - printk_debug("IDE0 "); + printk(BIOS_DEBUG, "IDE0 "); } pci_write_config16(dev, IDE_TIM_PRI, ideTimingConfig); @@ -75,7 +75,7 @@ static void ide_init(struct device *dev) ideTimingConfig |= (3 << 8); // RCT = 1 clock ideTimingConfig |= (1 << 1); // IE0 ideTimingConfig |= (1 << 0); // TIME0 - printk_debug("IDE1 "); + printk(BIOS_DEBUG, "IDE1 "); } pci_write_config16(dev, IDE_TIM_SEC, ideTimingConfig); @@ -92,7 +92,7 @@ static void ide_init(struct device *dev) /* Interrupt Pin is set by D31IP.PIP */ pci_write_config32(dev, INTR_LN, 0xff); /* Int 15 */ - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } static void ide_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_lpc.c b/src/southbridge/intel/i82801gx/i82801gx_lpc.c index ccab5482c9..f0e48ec29e 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_lpc.c +++ b/src/southbridge/intel/i82801gx/i82801gx_lpc.c @@ -52,16 +52,16 @@ static void i82801gx_enable_apic(struct device *dev) *ioapic_index = 0; reg32 = *ioapic_data; - printk_debug("Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); + printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", (reg32 >> 24) & 0x0f); if (reg32 != (1 << 25)) die("APIC Error\n"); - printk_spew("Dumping IOAPIC registers\n"); + printk(BIOS_SPEW, "Dumping IOAPIC registers\n"); for (i=0; i<3; i++) { *ioapic_index = i; - printk_spew(" reg 0x%04x:", i); + printk(BIOS_SPEW, " reg 0x%04x:", i); reg32 = *ioapic_data; - printk_spew(" 0x%08x\n", reg32); + printk(BIOS_SPEW, " 0x%08x\n", reg32); } *ioapic_index = 3; /* Select Boot Configuration register. */ @@ -213,7 +213,7 @@ static void i82801gx_power_options(device_t dev) reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */ pci_write_config8(dev, GEN_PMCON_3, reg8); - printk_info("Set power %s after power failure.\n", state); + printk(BIOS_INFO, "Set power %s after power failure.\n", state); /* Set up NMI on errors. */ reg8 = inb(0x61); @@ -227,10 +227,10 @@ static void i82801gx_power_options(device_t dev) nmi_option = NMI_OFF; get_option(&nmi_option, "nmi"); if (nmi_option) { - printk_info ("NMI sources enabled.\n"); + printk(BIOS_INFO, "NMI sources enabled.\n"); reg8 &= ~(1 << 7); /* Set NMI. */ } else { - printk_info ("NMI sources disabled.\n"); + printk(BIOS_INFO, "NMI sources disabled.\n"); reg8 |= ( 1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ } outb(reg8, 0x70); @@ -296,7 +296,7 @@ static void i82801gx_rtc_init(struct device *dev) reg8 &= ~RTC_BATTERY_DEAD; pci_write_config8(dev, GEN_PMCON_3, reg8); } - printk_debug("rtc_failed = 0x%x\n", rtc_failed); + printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); rtc_init(rtc_failed); } @@ -340,13 +340,13 @@ static void i82801gx_lock_smm(struct device *dev) #endif #if ENABLE_ACPI_MODE_IN_COREBOOT - printk_debug("Enabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n"); outb(0xe1, 0xb2); // Enable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #else - printk_debug("Disabling ACPI via APMC:\n"); + printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n"); outb(0x1e, 0xb2); // Disable ACPI mode - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); #endif /* Don't allow evil boot loaders, kernels, or * userspace applications to deceive us: @@ -355,29 +355,29 @@ static void i82801gx_lock_smm(struct device *dev) #if TEST_SMM_FLASH_LOCKDOWN /* Now try this: */ - printk_debug("Locking BIOS to RO... "); + printk(BIOS_DEBUG, "Locking BIOS to RO... "); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); reg8 &= ~(1 << 0); /* clear BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 |= (1 << 1); /* set BLE */ pci_write_config8(dev, 0xdc, reg8); - printk_debug("ok.\n"); + printk(BIOS_DEBUG, "ok.\n"); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Writing:\n"); + printk(BIOS_DEBUG, "Writing:\n"); *(volatile u8 *)0xfff00000 = 0x00; - printk_debug("Testing:\n"); + printk(BIOS_DEBUG, "Testing:\n"); reg8 |= (1 << 0); /* set BIOSWE */ pci_write_config8(dev, 0xdc, reg8); reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ - printk_debug(" BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", + printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off", (reg8&1)?"rw":"ro"); - printk_debug("Done.\n"); + printk(BIOS_DEBUG, "Done.\n"); #endif } #endif @@ -406,7 +406,7 @@ static void i82801gx_fixups(struct device *dev) static void lpc_init(struct device *dev) { - printk_debug("i82801gx: lpc_init\n"); + printk(BIOS_DEBUG, "i82801gx: lpc_init\n"); /* Set the value for PCI command register. */ pci_write_config16(dev, PCI_COMMAND, 0x000f); diff --git a/src/southbridge/intel/i82801gx/i82801gx_pci.c b/src/southbridge/intel/i82801gx/i82801gx_pci.c index d9057cb295..c4c22f0ae8 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_pci.c +++ b/src/southbridge/intel/i82801gx/i82801gx_pci.c @@ -71,7 +71,7 @@ static void ich_pci_dev_enable_resources(struct device *dev) /* Set the subsystem vendor and device id for mainboard devices */ ops = ops_pci(dev); if (dev->on_mainboard && ops && ops->set_subsystem) { - printk_debug("%s subsystem <- %02x/%02x\n", + printk(BIOS_DEBUG, "%s subsystem <- %02x/%02x\n", dev_path(dev), CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID, CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID); @@ -87,10 +87,10 @@ static void ich_pci_dev_enable_resources(struct device *dev) * this will cause the ROM and APICs not being visible * anymore. */ - printk_debug("%s cmd <- %02x\n", dev_path(dev), command); + printk(BIOS_DEBUG, "%s cmd <- %02x\n", dev_path(dev), command); pci_write_config16(dev, PCI_COMMAND, command); #else - printk_debug("%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command); + printk(BIOS_DEBUG, "%s cmd <- %02x (NOT WRITTEN!)\n", dev_path(dev), command); #endif } @@ -105,7 +105,7 @@ static void ich_pci_bus_enable_resources(struct device *dev) ctrl = pci_read_config16(dev, PCI_BRIDGE_CONTROL); ctrl |= dev->link[0].bridge_ctrl; ctrl |= (PCI_BRIDGE_CTL_PARITY + PCI_BRIDGE_CTL_SERR); /* error check */ - printk_debug("%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); + printk(BIOS_DEBUG, "%s bridge ctrl <- %04x\n", dev_path(dev), ctrl); pci_write_config16(dev, PCI_BRIDGE_CONTROL, ctrl); /* This is the reason we need our own pci_bus_enable_resources */ diff --git a/src/southbridge/intel/i82801gx/i82801gx_pcie.c b/src/southbridge/intel/i82801gx/i82801gx_pcie.c index b66a887063..d69bc6d07d 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_pcie.c +++ b/src/southbridge/intel/i82801gx/i82801gx_pcie.c @@ -28,7 +28,7 @@ static void pci_init(struct device *dev) u16 reg16; u32 reg32; - printk_debug("Initializing ICH7 PCIe bridge.\n"); + printk(BIOS_DEBUG, "Initializing ICH7 PCIe bridge.\n"); /* Enable Bus Master */ reg32 = pci_read_config32(dev, PCI_COMMAND); @@ -77,13 +77,13 @@ static void pci_init(struct device *dev) #ifdef EVEN_MORE_DEBUG reg32 = pci_read_config32(dev, 0x20); - printk_spew(" MBL = 0x%08x\n", reg32); + printk(BIOS_SPEW, " MBL = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x24); - printk_spew(" PMBL = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMBL = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x28); - printk_spew(" PMBU32 = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMBU32 = 0x%08x\n", reg32); reg32 = pci_read_config32(dev, 0x2c); - printk_spew(" PMLU32 = 0x%08x\n", reg32); + printk(BIOS_SPEW, " PMLU32 = 0x%08x\n", reg32); #endif /* Clear errors in status registers */ diff --git a/src/southbridge/intel/i82801gx/i82801gx_sata.c b/src/southbridge/intel/i82801gx/i82801gx_sata.c index ec477e1696..50cdb48131 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_sata.c +++ b/src/southbridge/intel/i82801gx/i82801gx_sata.c @@ -33,10 +33,10 @@ static void sata_init(struct device *dev) /* Get the chip configuration */ config_t *config = dev->chip_info; - printk_debug("i82801gx_sata: initializing...\n"); + printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n"); if (config == NULL) { - printk_err("i82801gx_sata: error: device not in Config.lb!\n"); + printk(BIOS_ERR, "i82801gx_sata: error: device not in Config.lb!\n"); return; } @@ -46,7 +46,7 @@ static void sata_init(struct device *dev) pci_write_config16(dev, PCI_COMMAND, 0x0007); if (config->ide_legacy_combined) { - printk_debug("SATA controller in combined mode.\n"); + printk(BIOS_DEBUG, "SATA controller in combined mode.\n"); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); /* And without AHCI BAR no memory decoding */ @@ -80,7 +80,7 @@ static void sata_init(struct device *dev) /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x5a000180); } else if(config->sata_ahci) { - printk_debug("SATA controller in AHCI mode.\n"); + printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); /* Allow both Legacy and Native mode */ pci_write_config8(dev, 0x09, 0x8f); @@ -112,7 +112,7 @@ static void sata_init(struct device *dev) /* SATA Initialization register */ pci_write_config32(dev, 0x94, 0x1a000180); } else { - printk_debug("SATA controller in plain mode.\n"); + printk(BIOS_DEBUG, "SATA controller in plain mode.\n"); /* Set Sata Controller Mode. No Mapping(?) */ pci_write_config8(dev, 0x90, 0x00); diff --git a/src/southbridge/intel/i82801gx/i82801gx_smbus.c b/src/southbridge/intel/i82801gx/i82801gx_smbus.c index 4306055d37..50c6d0f342 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smbus.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smbus.c @@ -35,11 +35,11 @@ static void smbus_init(struct device *dev) u32 smb_base; smb_base = pci_read_config32(dev, SMB_BASE); - printk_debug("Initializing SMBus device:\n"); - printk_debug(" Old SMBUS Base Address: 0x%04x\n", smb_base); + printk(BIOS_DEBUG, "Initializing SMBus device:\n"); + printk(BIOS_DEBUG, " Old SMBUS Base Address: 0x%04x\n", smb_base); pci_write_config32(dev, SMB_BASE, 0x00000401); smb_base = pci_read_config32(dev, SMB_BASE); - printk_debug(" New SMBUS Base Address: 0x%04x\n", smb_base); + printk(BIOS_DEBUG, " New SMBUS Base Address: 0x%04x\n", smb_base); } static int lsmbus_read_byte(device_t dev, u8 address) diff --git a/src/southbridge/intel/i82801gx/i82801gx_smi.c b/src/southbridge/intel/i82801gx/i82801gx_smi.c index 0c70812412..3ba21b0dd1 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smi.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smi.c @@ -63,16 +63,16 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_debug("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_debug("WAK "); - if (pm1_sts & (1 << 14)) printk_debug("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_debug("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_debug("RTC "); - if (pm1_sts & (1 << 8)) printk_debug("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_debug("GBL "); - if (pm1_sts & (1 << 4)) printk_debug("BM "); - if (pm1_sts & (1 << 0)) printk_debug("TMROF "); - printk_debug("\n"); + printk(BIOS_DEBUG, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF "); + printk(BIOS_DEBUG, "\n"); } /** @@ -92,28 +92,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -135,25 +135,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -175,11 +175,11 @@ static u16 reset_alt_gp_smi_status(void) static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts) { int i; - printk_debug("ALT_GP_SMI_STS: "); + printk(BIOS_DEBUG, "ALT_GP_SMI_STS: "); for (i=15; i<= 0; i--) { - if (alt_gp_smi_sts & (1 << i)) printk_debug("GPI%d ", (i-16)); + if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16)); } - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); } @@ -205,21 +205,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } @@ -243,14 +243,14 @@ static void smm_relocate(void) u32 smi_en; u16 pm1_en; - printk_debug("Initializing SMM handler..."); + printk(BIOS_DEBUG, "Initializing SMM handler..."); pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f, 0)), 0x40) & 0xfffc; - printk_spew(" ... pmbase = 0x%04x\n", pmbase); + printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase); smi_en = inl(pmbase + SMI_EN); if (smi_en & APMC_EN) { - printk_info("SMI# handler already enabled?\n"); + printk(BIOS_INFO, "SMI# handler already enabled?\n"); return; } @@ -258,7 +258,7 @@ static void smm_relocate(void) memcpy((void *)0x38000, &smm_relocation_start, &smm_relocation_end - &smm_relocation_start); - printk_debug("\n"); + printk(BIOS_DEBUG, "\n"); dump_smi_status(reset_smi_status()); dump_pm1_status(reset_pm1_status()); dump_gpe0_status(reset_gpe0_status()); @@ -314,7 +314,7 @@ static void smm_relocate(void) */ /* raise an SMI interrupt */ - printk_spew(" ... raise SMI#\n"); + printk(BIOS_SPEW, " ... raise SMI#\n"); outb(0x00, 0xb2); } @@ -349,7 +349,7 @@ void smm_lock(void) * After running this function, only a full reset can * make the SMM registers writable again. */ - printk_debug("Locking SMM.\n"); + printk(BIOS_DEBUG, "Locking SMM.\n"); pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), SMRAM, D_LCK | G_SMRAME | C_BASE_SEG); } diff --git a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c index 9cd0370cdc..b478dbaa90 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_smihandler.c +++ b/src/southbridge/intel/i82801gx/i82801gx_smihandler.c @@ -76,18 +76,18 @@ static u16 reset_pm1_status(void) static void dump_pm1_status(u16 pm1_sts) { - printk_spew("PM1_STS: "); - if (pm1_sts & (1 << 15)) printk_spew("WAK "); - if (pm1_sts & (1 << 14)) printk_spew("PCIEXPWAK "); - if (pm1_sts & (1 << 11)) printk_spew("PRBTNOR "); - if (pm1_sts & (1 << 10)) printk_spew("RTC "); - if (pm1_sts & (1 << 8)) printk_spew("PWRBTN "); - if (pm1_sts & (1 << 5)) printk_spew("GBL "); - if (pm1_sts & (1 << 4)) printk_spew("BM "); - if (pm1_sts & (1 << 0)) printk_spew("TMROF "); - printk_spew("\n"); + printk(BIOS_SPEW, "PM1_STS: "); + if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK "); + if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK "); + if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR "); + if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC "); + if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN "); + if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL "); + if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM "); + if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF "); + printk(BIOS_SPEW, "\n"); int reg16 = inw(pmbase + PM1_EN); - printk_spew("PM1_EN: %x\n", reg16); + printk(BIOS_SPEW, "PM1_EN: %x\n", reg16); } /** @@ -107,28 +107,28 @@ static u32 reset_smi_status(void) static void dump_smi_status(u32 smi_sts) { - printk_debug("SMI_STS: "); - if (smi_sts & (1 << 26)) printk_debug("SPI "); - if (smi_sts & (1 << 25)) printk_debug("EL_SMI "); - if (smi_sts & (1 << 21)) printk_debug("MONITOR "); - if (smi_sts & (1 << 20)) printk_debug("PCI_EXP_SMI "); - if (smi_sts & (1 << 18)) printk_debug("INTEL_USB2 "); - if (smi_sts & (1 << 17)) printk_debug("LEGACY_USB2 "); - if (smi_sts & (1 << 16)) printk_debug("SMBUS_SMI "); - if (smi_sts & (1 << 15)) printk_debug("SERIRQ_SMI "); - if (smi_sts & (1 << 14)) printk_debug("PERIODIC "); - if (smi_sts & (1 << 13)) printk_debug("TCO "); - if (smi_sts & (1 << 12)) printk_debug("DEVMON "); - if (smi_sts & (1 << 11)) printk_debug("MCSMI "); - if (smi_sts & (1 << 10)) printk_debug("GPI "); - if (smi_sts & (1 << 9)) printk_debug("GPE0 "); - if (smi_sts & (1 << 8)) printk_debug("PM1 "); - if (smi_sts & (1 << 6)) printk_debug("SWSMI_TMR "); - if (smi_sts & (1 << 5)) printk_debug("APM "); - if (smi_sts & (1 << 4)) printk_debug("SLP_SMI "); - if (smi_sts & (1 << 3)) printk_debug("LEGACY_USB "); - if (smi_sts & (1 << 2)) printk_debug("BIOS "); - printk_debug("\n"); + printk(BIOS_DEBUG, "SMI_STS: "); + if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI "); + if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI "); + if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR "); + if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI "); + if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 "); + if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 "); + if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI "); + if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI "); + if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC "); + if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO "); + if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON "); + if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI "); + if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI "); + if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 "); + if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 "); + if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR "); + if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM "); + if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI "); + if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB "); + if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS "); + printk(BIOS_DEBUG, "\n"); } @@ -150,25 +150,25 @@ static u32 reset_gpe0_status(void) static void dump_gpe0_status(u32 gpe0_sts) { int i; - printk_debug("GPE0_STS: "); + printk(BIOS_DEBUG, "GPE0_STS: "); for (i=31; i<= 16; i--) { - if (gpe0_sts & (1 << i)) printk_debug("GPIO%d ", (i-16)); + if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16)); } - if (gpe0_sts & (1 << 14)) printk_debug("USB4 "); - if (gpe0_sts & (1 << 13)) printk_debug("PME_B0 "); - if (gpe0_sts & (1 << 12)) printk_debug("USB3 "); - if (gpe0_sts & (1 << 11)) printk_debug("PME "); - if (gpe0_sts & (1 << 10)) printk_debug("EL_SCI/BATLOW "); - if (gpe0_sts & (1 << 9)) printk_debug("PCI_EXP "); - if (gpe0_sts & (1 << 8)) printk_debug("RI "); - if (gpe0_sts & (1 << 7)) printk_debug("SMB_WAK "); - if (gpe0_sts & (1 << 6)) printk_debug("TCO_SCI "); - if (gpe0_sts & (1 << 5)) printk_debug("AC97 "); - if (gpe0_sts & (1 << 4)) printk_debug("USB2 "); - if (gpe0_sts & (1 << 3)) printk_debug("USB1 "); - if (gpe0_sts & (1 << 2)) printk_debug("HOT_PLUG "); - if (gpe0_sts & (1 << 0)) printk_debug("THRM "); - printk_debug("\n"); + if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 "); + if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 "); + if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 "); + if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME "); + if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW "); + if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP "); + if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI "); + if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK "); + if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI "); + if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 "); + if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 "); + if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 "); + if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG "); + if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM "); + printk(BIOS_DEBUG, "\n"); } @@ -193,21 +193,21 @@ static u32 reset_tco_status(void) static void dump_tco_status(u32 tco_sts) { - printk_debug("TCO_STS: "); - if (tco_sts & (1 << 20)) printk_debug("SMLINK_SLV "); - if (tco_sts & (1 << 18)) printk_debug("BOOT "); - if (tco_sts & (1 << 17)) printk_debug("SECOND_TO "); - if (tco_sts & (1 << 16)) printk_debug("INTRD_DET "); - if (tco_sts & (1 << 12)) printk_debug("DMISERR "); - if (tco_sts & (1 << 10)) printk_debug("DMISMI "); - if (tco_sts & (1 << 9)) printk_debug("DMISCI "); - if (tco_sts & (1 << 8)) printk_debug("BIOSWR "); - if (tco_sts & (1 << 7)) printk_debug("NEWCENTURY "); - if (tco_sts & (1 << 3)) printk_debug("TIMEOUT "); - if (tco_sts & (1 << 2)) printk_debug("TCO_INT "); - if (tco_sts & (1 << 1)) printk_debug("SW_TCO "); - if (tco_sts & (1 << 0)) printk_debug("NMI2SMI "); - printk_debug("\n"); + printk(BIOS_DEBUG, "TCO_STS: "); + if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV "); + if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT "); + if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO "); + if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET "); + if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR "); + if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI "); + if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI "); + if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR "); + if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY "); + if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT "); + if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT "); + if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO "); + if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI "); + printk(BIOS_DEBUG, "\n"); } /* We are using PCIe accesses for now @@ -220,7 +220,7 @@ int southbridge_io_trap_handler(int smif) { switch (smif) { case 0x32: - printk_debug("OS Init\n"); + printk(BIOS_DEBUG, "OS Init\n"); /* gnvs->smif: * On success, the IO Trap Handler returns 0 * On failure, the IO Trap Handler returns a value != 0 @@ -299,23 +299,23 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* Figure out SLP_TYP */ reg32 = inl(pmbase + PM1_CNT); - printk_spew("SMI#: SLP = 0x%08x\n", reg32); + printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32); slp_typ = (reg32 >> 10) & 7; /* Next, do the deed. */ switch (slp_typ) { - case 0: printk_debug("SMI#: Entering S0 (On)\n"); break; - case 1: printk_debug("SMI#: Entering S1 (Assert STPCLK#)\n"); break; + case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break; + case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break; case 5: - printk_debug("SMI#: Entering S3 (Suspend-To-RAM)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n"); /* Invalidate the cache before going to S3 */ wbinvd(); break; - case 6: printk_debug("SMI#: Entering S4 (Suspend-To-Disk)\n"); break; + case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break; case 7: - printk_debug("SMI#: Entering S5 (Soft Power off)\n"); + printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n"); outl(0, pmbase + GPE0_EN); @@ -333,7 +333,7 @@ static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *stat /* also iterates over all bridges on bus 0 */ busmaster_disable_on_bus(0); break; - default: printk_debug("SMI#: ERROR: SLP_TYP reserved\n"); break; + default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break; } /* Write back to the SLP register to cause the originally intended @@ -368,40 +368,40 @@ static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("C-state control\n"); + printk(BIOS_DEBUG, "C-state control\n"); break; case PST_CONTROL: /* Calling this function seems to cause * some kind of race condition in Linux * and causes a kernel oops */ - printk_debug("P-state control\n"); + printk(BIOS_DEBUG, "P-state control\n"); break; case ACPI_DISABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl &= ~SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI disabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n"); break; case ACPI_ENABLE: pmctrl = inl(pmbase + PM1_CNT); pmctrl |= SCI_EN; outl(pmctrl, pmbase + PM1_CNT); - printk_debug("SMI#: ACPI enabled.\n"); + printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n"); break; case GNVS_UPDATE: if (smm_initialized) { - printk_debug("SMI#: SMM structures already initialized!\n"); + printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n"); return; } gnvs = *(global_nvs_t **)0x500; tcg = *(void **)0x504; smi1 = *(void **)0x508; smm_initialized = 1; - printk_debug("SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); + printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1); break; default: - printk_debug("SMI#: Unknown function APM_CNT=%02x\n", reg8); + printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8); } } @@ -445,7 +445,7 @@ static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_ mainboard_smi_gpi(reg16); } else { if (reg16) - printk_debug("GPI (mask %04x)\n",reg16); + printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16); } } @@ -459,7 +459,7 @@ static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_s if ((reg32 & MCSMI_EN) == 0) return; - printk_debug("Microcontroller SMI.\n"); + printk(BIOS_DEBUG, "Microcontroller SMI.\n"); } @@ -490,12 +490,12 @@ static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_ * resolute answer would be to power down the * box. */ - printk_debug("Switching back to RO\n"); + printk(BIOS_DEBUG, "Switching back to RO\n"); pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1)); } /* No else for now? */ } else if (tco_sts & (1 << 3)) { /* TIMEOUT */ /* Handle TCO timeout */ - printk_debug("TCO Timeout.\n"); + printk(BIOS_DEBUG, "TCO Timeout.\n"); } else if (!tco_sts) { dump_tco_status(tco_sts); } @@ -511,7 +511,7 @@ static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *s if ((reg32 & PERIODIC_EN) == 0) return; - printk_debug("Periodic SMI.\n"); + printk(BIOS_DEBUG, "Periodic SMI.\n"); } static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save) @@ -544,7 +544,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st /* IOTRAP(0) SMIC */ if (IOTRAP(0)) { if (!(trap_cycle & (1 << 24))) { // It's a write - printk_debug("SMI1 command\n"); + printk(BIOS_DEBUG, "SMI1 command\n"); data = RCBA32(0x1e18); data &= mask; // if (smi1) @@ -554,16 +554,16 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st // Fall through to debug } - printk_debug(" trapped io address = 0x%x\n", trap_cycle & 0xfffc); - for (i=0; i < 4; i++) if(IOTRAP(i)) printk_debug(" TRAP = %d\n", i); - printk_debug(" AHBE = %x\n", (trap_cycle >> 16) & 0xf); - printk_debug(" MASK = 0x%08x\n", mask); - printk_debug(" read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); + printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc); + for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i); + printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf); + printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask); + printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write"); if (!(trap_cycle & (1 << 24))) { /* Write Cycle */ data = RCBA32(0x1e18); - printk_debug(" iotrap written data = 0x%08x\n", data); + printk(BIOS_DEBUG, " iotrap written data = 0x%08x\n", data); } #undef IOTRAP } @@ -635,7 +635,7 @@ void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_sav if (southbridge_smi[i]) southbridge_smi[i](node, state_save); else { - printk_debug("SMI_STS[%d] occured, but no " + printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no " "handler available.\n", i); dump = 1; } diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb.c b/src/southbridge/intel/i82801gx/i82801gx_usb.c index 2803f9cdef..00fddf7c65 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb.c @@ -30,7 +30,7 @@ static void usb_init(struct device *dev) u8 reg8; /* USB Specification says the device must be Bus Master */ - printk_debug("UHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "UHCI: Setting up controller.. "); reg32 = pci_read_config32(dev, PCI_COMMAND); pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER); @@ -43,7 +43,7 @@ static void usb_init(struct device *dev) reg8 |= (1 << 0); pci_write_config8(dev, 0xca, reg8); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c index 829ae6b819..ead7bdca7f 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_debug.c @@ -30,7 +30,7 @@ void set_debug_port(unsigned port) { u32 dbgctl; - printk_debug("Enabling OWNER_CNT\n"); + printk(BIOS_DEBUG, "Enabling OWNER_CNT\n"); dbgctl = read32(EHCI_BAR + EHCI_DEBUG_OFFSET); dbgctl |= (1 << 30); write32(EHCI_BAR + EHCI_DEBUG_OFFSET, dbgctl); diff --git a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c index 3d61cae9b6..1bc5fcaecb 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c +++ b/src/southbridge/intel/i82801gx/i82801gx_usb_ehci.c @@ -35,7 +35,7 @@ static void usb_ehci_init(struct device *dev) u32 reg32; u8 reg8; - printk_debug("EHCI: Setting up controller.. "); + printk(BIOS_DEBUG, "EHCI: Setting up controller.. "); reg32 = pci_read_config32(dev, PCI_COMMAND); reg32 |= PCI_COMMAND_MASTER; reg32 |= PCI_COMMAND_SERR; @@ -61,7 +61,7 @@ static void usb_ehci_init(struct device *dev) reg8 |= (1 << 4); pci_write_config8(dev, 0x84, reg8); - printk_debug("done.\n"); + printk(BIOS_DEBUG, "done.\n"); } static void usb_ehci_set_subsystem(device_t dev, unsigned vendor, unsigned device) diff --git a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c index 38350d7ef2..436a9227cd 100644 --- a/src/southbridge/intel/i82801gx/i82801gx_watchdog.c +++ b/src/southbridge/intel/i82801gx/i82801gx_watchdog.c @@ -49,5 +49,5 @@ void watchdog_off(void) outw(0x0008, base + 0x04); outw(0x0002, base + 0x06); - printk_debug("ICH7 watchdog disabled\r\n"); + printk(BIOS_DEBUG, "ICH7 watchdog disabled\r\n"); } diff --git a/src/southbridge/intel/i82870/p64h2_ioapic.c b/src/southbridge/intel/i82870/p64h2_ioapic.c index 0fa74ffcf3..d90fede890 100644 --- a/src/southbridge/intel/i82870/p64h2_ioapic.c +++ b/src/southbridge/intel/i82870/p64h2_ioapic.c @@ -62,7 +62,7 @@ static void p64h2_ioapic_init(device_t dev) pIndexRegister = (volatile uint32_t*) memoryBase; pWindowRegister = (volatile uint32_t*)(memoryBase + 0x10); - printk_debug("IOAPIC %d at %02x:%02x.%01x MBAR = %x DataAddr = %x\n", + printk(BIOS_DEBUG, "IOAPIC %d at %02x:%02x.%01x MBAR = %x DataAddr = %x\n", apic_id, dev->bus->secondary, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn), pIndexRegister, pWindowRegister); diff --git a/src/southbridge/intel/pxhd/pxhd_bridge.c b/src/southbridge/intel/pxhd/pxhd_bridge.c index 0766b22e7b..0a50e5a994 100644 --- a/src/southbridge/intel/pxhd/pxhd_bridge.c +++ b/src/southbridge/intel/pxhd/pxhd_bridge.c @@ -22,7 +22,7 @@ static void pxhd_enable(device_t dev) } bridge = dev_find_slot(dev->bus->secondary, dev->path.pci.devfn & ~1); if (!bridge) { - printk_err("Cannot find bridge for ioapic: %s\n", + printk(BIOS_ERR, "Cannot find bridge for ioapic: %s\n", dev_path(dev)); return; } @@ -48,7 +48,7 @@ static unsigned int pxhd_scan_bridge(device_t dev, unsigned int max) if(bus_100Mhz) { uint16_t word; - printk_debug("setting pxhd bus to 100 Mhz\n"); + printk(BIOS_DEBUG, "setting pxhd bus to 100 Mhz\n"); /* set to pcix 100 mhz */ word = pci_read_config16(dev, 0x40); word &= ~(3 << 14); |