1 files changed, 0 insertions, 140 deletions
diff --git a/src/southbridge/intel/ich5r/i82801er_early_smbus.c b/src/southbridge/intel/ich5r/i82801er_early_smbus.c
deleted file mode 100644
index ef40e16b9f..0000000000
--- a/src/southbridge/intel/ich5r/i82801er_early_smbus.c
+++ /dev/null
@@ -1,140 +0,0 @@
-#include "i82801er_smbus.h"
-
-#define SMBUS_IO_BASE 0x0f00
-
-static void enable_smbus(void)
-{
-	device_t dev;
-	dev = pci_locate_device(PCI_ID(0x8086, 0x24d3), 0);
-	if (dev == PCI_DEV_INVALID) {
-		die("SMBUS controller not found\r\n");
-	}
-	print_spew("SMBus controller enabled\r\n");
-	
-	pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
-	/* Set smbus enable */
-	pci_write_config8(dev, 0x40, 1);
-	/* Set smbus iospace enable */
-	pci_write_config8(dev, 0x4, 1);
-	/* SMBALERT_DIS */
-	pci_write_config8(dev, 0x11, 4);
-	
-	/* Disable interrupt generation */
-	outb(0, SMBUS_IO_BASE + SMBHSTCTL);
-
-	/* clear any lingering errors, so the transaction will run */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-
-#if 0	// It's unlikely that half the southbridge suddenly vanishes?
-	dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
-	if (dev == PCI_DEV_INVALID) {
-		die("ISA bridge not found\r\n");
-	}
-#endif
-}
-
-static int smbus_read_byte(unsigned device, unsigned address)
-{
-	return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
-}
-
-static void smbus_write_byte(unsigned device, unsigned address, unsigned char val)
-{
-	if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
-		return;
-	}
-	
-	print_debug("Unimplemented smbus_write_byte() called.\r\n");
-
-#if 0
-	/* setup transaction */
-	/* disable interrupts */
-	outw(inw(SMBUS_IO_BASE + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)),
-			SMBUS_IO_BASE + SMBGCTL);
-	/* set the device I'm talking too */
-	outw(((device & 0x7f) << 1) | 1, SMBUS_IO_BASE + SMBHSTADDR);
-	outb(address & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
-	/* set up for a byte data write */ /* FIXME */
-	outw((inw(SMBUS_IO_BASE + SMBGCTL) & ~7) | (0x1), SMBUS_IO_BASE + SMBGCTL);
-	/* clear any lingering errors, so the transaction will run */
-	/* Do I need to write the bits to a 1 to clear an error? */
-	outw(inw(SMBUS_IO_BASE + SMBGSTATUS), SMBUS_IO_BASE + SMBGSTATUS);
-
-	/* clear the data word...*/
-	outw(val, SMBUS_IO_BASE + SMBHSTDAT);
-
-	/* start the command */
-	outw((inw(SMBUS_IO_BASE + SMBGCTL) | (1 << 3)), SMBUS_IO_BASE + SMBGCTL);
-
-	/* poll for transaction completion */
-	smbus_wait_until_done(SMBUS_IO_BASE);
-#endif	
-	return;
-}
-
-static int smbus_write_block(unsigned device, unsigned length, unsigned cmd, 
-		 unsigned data1, unsigned data2)
-{
-	unsigned char global_control_register;
-	unsigned char global_status_register;
-	unsigned char byte;
-	unsigned char stat;
-	int i;
-
-	/* chear the PM timeout flags, SECOND_TO_STS */
-	outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
-	
-	if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
-		return -2;
-	}
-	
-	/* setup transaction */
-	/* Obtain ownership */
-	outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
-	for(stat=0;(stat&0x40)==0;) {
-	stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-	/* clear the done bit */
-	outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
-	/* disable interrupts */
-	outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
-	
-	/* set the device I'm talking too */
-	outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
-	
-	/* set the command address */
-	outb(cmd & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
-	
-	/* set the block length */
-	outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0);
-	
-	/* try sending out the first byte of data here */
-	byte=(data1>>(0))&0x0ff;
-	outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
-	/* issue a block write command */
-	outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40, 
-			SMBUS_IO_BASE + SMBHSTCTL);
-
-	for(i=0;i<length;i++) {
-		
-		/* poll for transaction completion */
-		if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) {
-			return -3;
-		}
-		
-		/* load the next byte */
-		if(i>3)
-			byte=(data2>>(i%4))&0x0ff;
-		else
-			byte=(data1>>(i))&0x0ff;
-		outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
-		
-		/* clear the done bit */
-		outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), 
-				SMBUS_IO_BASE + SMBHSTSTAT);
-	}
-
-	print_debug("SMBUS Block complete\r\n");
-	return 0;
-}
-