aboutsummaryrefslogtreecommitdiff
path: root/src/southbridge/intel/i82801xx/i82801xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/intel/i82801xx/i82801xx.h')
-rw-r--r--src/southbridge/intel/i82801xx/i82801xx.h127
1 files changed, 64 insertions, 63 deletions
diff --git a/src/southbridge/intel/i82801xx/i82801xx.h b/src/southbridge/intel/i82801xx/i82801xx.h
index 273767949e..fa306bc0a4 100644
--- a/src/southbridge/intel/i82801xx/i82801xx.h
+++ b/src/southbridge/intel/i82801xx/i82801xx.h
@@ -18,89 +18,90 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#ifndef I82801XX_H
-#define I82801XX_H
+#ifndef SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H
+#define SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H
#ifndef __ROMCC__
#include "chip.h"
extern void i82801xx_enable(device_t dev);
#endif
-#define PCI_DMA_CFG 0x90
-#define SERIRQ_CNTL 0x64
-#define GEN_CNTL 0xd0
-#define GEN_STS 0xd4
-#define RTC_CONF 0xd8
-#define GEN_PMCON_3 0xa4
+#define PCI_DMA_CFG 0x90
+#define SERIRQ_CNTL 0x64
+#define GEN_CNTL 0xd0
+#define GEN_STS 0xd4
+#define RTC_CONF 0xd8
+#define GEN_PMCON_3 0xa4
-#define PCICMD 0x04
-#define PMBASE 0x40
-#define PM_BASE_ADDR 0x1100
-#define ACPI_CNTL 0x44
-#define BIOS_CNTL 0x4E
-#define GPIO_BASE 0x58
-#define GPIO_BASE_ADDR 0x1180
-#define GPIO_CNTL 0x5C
-#define PIRQA_ROUT 0x60
-#define PIRQE_ROUT 0x68
-#define COM_DEC 0xE0
-#define LPC_EN 0xE6
-#define FUNC_DIS 0xF2
+#define PCICMD 0x04
+#define PMBASE 0x40
+#define PM_BASE_ADDR 0x1100
+#define ACPI_CNTL 0x44
+#define BIOS_CNTL 0x4E
+#define GPIO_BASE 0x58
+#define GPIO_BASE_ADDR 0x1180
+#define GPIO_CNTL 0x5C
+#define PIRQA_ROUT 0x60
+#define PIRQE_ROUT 0x68
+#define COM_DEC 0xE0
+#define LPC_EN 0xE6
+#define FUNC_DIS 0xF2
-#define CMD 0x04
-#define SBUS_NUM 0x19
-#define SUB_BUS_NUM 0x1A
-#define SMLT 0x1B
-#define IOBASE 0x1C
-#define IOLIM 0x1D
-#define MEMBASE 0x20
-#define MEMLIM 0x22
-#define CNF 0x50
-#define MTT 0x70
-#define PCI_MAST_STS 0x82
+#define CMD 0x04
+#define SBUS_NUM 0x19
+#define SUB_BUS_NUM 0x1A
+#define SMLT 0x1B
+#define IOBASE 0x1C
+#define IOLIM 0x1D
+#define MEMBASE 0x20
+#define MEMLIM 0x22
+#define CNF 0x50
+#define MTT 0x70
+#define PCI_MAST_STS 0x82
-// GEN_PMCON_3 bits
+/* GEN_PMCON_3 bits */
#define RTC_BATTERY_DEAD (1 << 2)
#define RTC_POWER_FAILED (1 << 1)
#define SLEEP_AFTER_POWER_FAIL (1 << 0)
-// PCI Configuration Space (D31:F1)
-#define IDE_TIM_PRI 0x40 // IDE timings, primary
-#define IDE_TIM_SEC 0x42 // IDE timings, secondary
+/* PCI Configuration Space (D31:F1) */
+#define IDE_TIM_PRI 0x40 /* IDE timings, primary */
+#define IDE_TIM_SEC 0x42 /* IDE timings, secondary */
-// IDE_TIM bits
+/* IDE_TIM bits */
#define IDE_DECODE_ENABLE (1 << 15)
-// PCI Configuration Space (D31:F3)
-#define SMB_BASE 0x20
-#define HOSTC 0x40
+/* PCI Configuration Space (D31:F3) */
+#define SMB_BASE 0x20
+#define HOSTC 0x40
-// HOSTC bits
-#define I2C_EN (1 << 2)
-#define SMB_SMI_EN (1 << 1)
-#define HST_EN (1 << 0)
+/* HOSTC bits */
+#define I2C_EN (1 << 2)
+#define SMB_SMI_EN (1 << 1)
+#define HST_EN (1 << 0)
-// SMBus IO bits
-/* TODO: Does it matter where we put the SMBus IO base, as long as we keep
- consistent and don't interfere with anything else? */
-//#define SMBUS_IO_BASE 0x1000
-#define SMBUS_IO_BASE 0x0f00
+/* SMBus I/O bits.
+ * TODO: Does it matter where we put the SMBus IO base, as long as we keep
+ * consistent and don't interfere with anything else?
+ */
+/* #define SMBUS_IO_BASE 0x1000 */
+#define SMBUS_IO_BASE 0x0f00
-#define SMBHSTSTAT 0x0
-#define SMBHSTCTL 0x2
-#define SMBHSTCMD 0x3
-#define SMBXMITADD 0x4
-#define SMBHSTDAT0 0x5
-#define SMBHSTDAT1 0x6
-#define SMBBLKDAT 0x7
-#define SMBTRNSADD 0x9
-#define SMBSLVDATA 0xa
-#define SMLINK_PIN_CTL 0xe
-#define SMBUS_PIN_CTL 0xf
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL 0x2
+#define SMBHSTCMD 0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT 0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL 0xf
-#define SMBUS_TIMEOUT (10 * 1000 * 100)
+#define SMBUS_TIMEOUT (10 * 1000 * 100)
-//HPET, if present
+/* HPET, if present */
#define HPET_ADDR 0xfed0000
-#endif /* I82801XX_H */
+#endif /* SOUTHBRIDGE_INTEL_I82801XX_I82801XX_H */