diff options
Diffstat (limited to 'src/southbridge/intel/fsp_rangeley/soc.h')
-rw-r--r-- | src/southbridge/intel/fsp_rangeley/soc.h | 401 |
1 files changed, 0 insertions, 401 deletions
diff --git a/src/southbridge/intel/fsp_rangeley/soc.h b/src/southbridge/intel/fsp_rangeley/soc.h deleted file mode 100644 index ce5e056514..0000000000 --- a/src/southbridge/intel/fsp_rangeley/soc.h +++ /dev/null @@ -1,401 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2008-2009 coresystems GmbH - * Copyright (C) 2012 The Chromium OS Authors. All rights reserved. - * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef SOUTHBRIDGE_INTEL_RANGELEY_SOC_H -#define SOUTHBRIDGE_INTEL_RANGELEY_SOC_H - -#include <arch/acpi.h> - -/* SOC types */ -#define SOC_TYPE_RANGELEY 0x1F - -/* - * It does not matter where we put the SMBus I/O base, as long as we - * keep it consistent and don't interfere with other devices. Stage2 - * will relocate this anyways. - * Our solution is to have SMB initialization move the I/O to SMBUS_IO_BASE - * again. But handling static BARs is a generic problem that should be - * solved in the device allocator. - */ - -/* Southbridge internal device IO BARs (Set to match FSP settings) */ -#define SMBUS_IO_BASE 0xefa0 -#define SMBUS_SLAVE_ADDR 0x24 -#define DEFAULT_GPIOBASE 0x0500 -#define DEFAULT_ABASE 0x0400 - -/* Southbridge internal device MEM BARs (Set to match FSP settings) */ -#define DEFAULT_IBASE 0xfed08000 -#define DEFAULT_PBASE 0xfed03000 - -#include <southbridge/intel/common/rcba.h> - -#ifndef __ACPI__ -#define DEBUG_PERIODIC_SMIS 0 - -void intel_soc_finalize_smm(void); - -#if !defined(__ROMCC__) -#include <device/device.h> -void soc_enable(struct device *dev); -void acpi_fill_in_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt); -#endif - -int soc_silicon_revision(void); -int soc_silicon_type(void); -int soc_silicon_supported(int type, int rev); - - -void soc_log_state(void); -void enable_smbus(void); -void enable_usb_bar(void); -void rangeley_sb_early_initialization(void); - -#if ENV_ROMSTAGE -int smbus_read_byte(unsigned int device, unsigned int address); -#endif - -#define MAINBOARD_POWER_OFF 0 -#define MAINBOARD_POWER_ON 1 -#define MAINBOARD_POWER_KEEP 2 - -#define SOC_EHCI1_DEV PCI_DEV(0, 0x1d, 0) -#define PCIE_DEV_SLOT0 1 -#define PCIE_DEV_SLOT1 2 -#define PCIE_DEV_SLOT2 3 -#define PCIE_DEV_SLOT3 4 - -/* PCI Configuration Space (D31:F0): LPC */ -#define SOC_LPC_DEV PCI_DEV(0, 0x1f, 0) -#define SOC_LPC_DEVFN PCI_DEVFN(0x1f, 0) - - -/* Southbridge IO BARs */ -#define ABASE 0x40 /* IO BAR */ -#define PBASE 0x44 /* MEM BAR */ -#define GBASE 0x48 /* IO BAR */ -#define IOBASE 0x4C /* MEM BAR */ -#define IBASE 0x50 /* MEM BAR */ -#define SBASE 0x54 /* MEM BAR */ -#define MPBASE 0x58 /* MEM BAR */ -#define SET_BAR_ENABLE 0x02 - -/* Rangeley ILB defines */ -#define ILB_ACTL 0 -#define ILB_PIRQA_ROUT 0x8 -#define ILB_PIRQB_ROUT 0x9 -#define ILB_PIRQC_ROUT 0xA -#define ILB_PIRQD_ROUT 0xB -#define ILB_PIRQE_ROUT 0xC -#define ILB_PIRQF_ROUT 0xD -#define ILB_PIRQG_ROUT 0xE -#define ILB_PIRQH_ROUT 0xF -#define ILB_SERIRQ_CNTL 0x10 -#define ILB_IR00 0x20 -#define ILB_IR01 0x22 -#define ILB_IR02 0x24 -#define ILB_IR03 0x26 -#define ILB_IR04 0x28 -#define ILB_IR05 0x2A -#define ILB_IR06 0x2C -#define ILB_IR07 0x2E -#define ILB_IR08 0x30 -#define ILB_IR09 0x32 -#define ILB_IR10 0x34 -#define ILB_IR11 0x36 -#define ILB_IR12 0x38 -#define ILB_IR13 0x3A -#define ILB_IR14 0x3C -#define ILB_IR15 0x3E -#define ILB_IR16 0x40 -#define ILB_IR17 0x42 -#define ILB_IR18 0x44 -#define ILB_IR19 0x46 -#define ILB_IR20 0x48 -#define ILB_IR21 0x4A -#define ILB_IR22 0x4C -#define ILB_IR23 0x4E -#define ILB_IR24 0x50 -#define ILB_IR25 0x52 -#define ILB_IR26 0x54 -#define ILB_IR27 0x56 -#define ILB_IR28 0x58 -#define ILB_IR29 0x5A -#define ILB_IR30 0x5C -#define ILB_IR31 0x5E -#define ILB_OIC 0x60 - -/* PCI Configuration Space (D31:F2/5) */ -#define SOC_SATA_DEV PCI_DEV(0, 0x17, 0) -#define SOC_SATA2_DEV PCI_DEV(0, 0x18, 0) - -#define SATA_SIRI 0xa0 /* SATA Indexed Register Index */ -#define SATA_SIRD 0xa4 /* SATA Indexed Register Data */ -#define SATA_SP 0xd0 /* Scratchpad */ -#define SATA_MAP 0x90 -#define SATA_PSC 0x92 - -/* SATA IOBP Registers */ -#define SATA_IOBP_SP0G3IR 0xea000151 -#define SATA_IOBP_SP1G3IR 0xea000051 - -/* PCI Configuration Space (D31:F3): SMBus */ -#define SOC_SMBUS_DEV PCI_DEV(0, 0x1f, 3) -#define SMB_BASE 0x20 -#define HOSTC 0x40 -#define SMB_RCV_SLVA 0x09 - -/* HOSTC bits */ -#define I2C_EN (1 << 2) -#define SMB_SMI_EN (1 << 1) -#define HST_EN (1 << 0) - -/* Root Port configuration space hide */ -#define RPFN_HIDE(port) (1 << (((port) * 4) + 3)) -/* Get the function number assigned to a Root Port */ -#define RPFN_FNGET(reg,port) (((reg) >> ((port) * 4)) & 7) -/* Set the function number for a Root Port */ -#define RPFN_FNSET(port,func) (((func) & 7) << ((port) * 4)) -/* Root Port function number mask */ -#define RPFN_FNMASK(port) (7 << ((port) * 4)) - - -#define NOINT 0 -#define INTA 1 -#define INTB 2 -#define INTC 3 -#define INTD 4 - -#define DIR_IDR 12 /* Interrupt D Pin Offset */ -#define DIR_ICR 8 /* Interrupt C Pin Offset */ -#define DIR_IBR 4 /* Interrupt B Pin Offset */ -#define DIR_IAR 0 /* Interrupt A Pin Offset */ - -#define PIRQA 0 -#define PIRQB 1 -#define PIRQC 2 -#define PIRQD 3 -#define PIRQE 4 -#define PIRQF 5 -#define PIRQG 6 -#define PIRQH 7 - -/* IO Buffer Programming */ -#define IOBPIRI 0x2330 -#define IOBPD 0x2334 -#define IOBPS 0x2338 -#define IOBPS_RW_BX ((1 << 9)|(1 << 10)) -#define IOBPS_WRITE_AX ((1 << 9)|(1 << 10)) -#define IOBPS_READ_AX ((1 << 8)|(1 << 9)|(1 << 10)) - - - -#define DIR_ROUTE(x,a,b,c,d) \ - RCBA32(x) = (((d) << DIR_IDR) | ((c) << DIR_ICR) | \ - ((b) << DIR_IBR) | ((a) << DIR_IAR)) - -/* PBASE Registers */ -#define PMC_CFG 0x08 -#define SPS (1 << 5) -#define NO_REBOOT (1 << 4) -#define SX_ENT_TO_EN (1 << 3) -#define TIMING_T581 (1 << 0) - -#define GEN_PMCON1 0x20 -# define DISB (1 << 23) -# define MEM_SR (1 << 21) -# define SRS (1 << 20) -# define CTS (1 << 19) -# define MS4V (1 << 18) -# define PWR_FLR (1 << 16) -# define PME_B0_S5_DIS (1 << 15) -# define SUS_PWR_FLR (1 << 14) -# define WOL_EN_OVRD (1 << 13) -# define DIS_SLP_X_STRCH_SUS_UP (1 << 12) -# define GEN_RST_STS (1 << 9) -# define RPS (1 << 2) -# define AFTERG3_EN (1 << 0) - -/* Function Disable PBASE + 0x34 */ -#define PBASE_FUNC_DIS 0x34 -#define PBASE_DISABLE_QUICKASSIST (1 << 0) -#define PBASE_DISABLE_GBE(x) (1 << (12 + x)) -#define PBASE_DISABLE_SATA2 (1 << 22) -#define PBASE_DISABLE_EHCI (1 << 23) -#define PBASE_DISABLE_SATA3 (1 << 23) - -/* GPIOBASE */ -#define GPIO_SC_USE_SEL 0x00 -#define GPIO_SC_IO_SEL 0x04 -#define GPIO_SC_GP_LVL 0x08 -#define GPIO_SC_TPE 0x0c -#define GPIO_SC_TNE 0x10 -#define GPIO_SC_TS 0x14 -#define GPIO_SUS_USE_SEL 0x80 -#define GPIO_SUS_IO_SEL 0x84 -#define GPIO_SUS_GP_LVL 0x88 -#define GPIO_SUS_TPE 0x8c -#define GPIO_SUS_TNE 0x90 -#define GPIO_SUS_TS 0x94 -#define GPIO_SUS_WE 0x98 - -/* IOBASE */ -#define CFIO_PAD_CONF0 0x00 -#define CFIO_PAD_CONF1 0x04 -#define CFIO_PAD_VAL 0x08 -#define CFIO_PAD_DFT 0x0C - -/* ACPI BASE */ -#define PM1_STS 0x00 -#define WAK_STS (1 << 15) -#define PCIEXPWAK_STS (1 << 14) -#define PRBTNOR_STS (1 << 11) -#define RTC_STS (1 << 10) -#define PWRBTN_STS (1 << 8) -#define GBL_STS (1 << 5) -#define BM_STS (1 << 4) -#define TMROF_STS (1 << 0) -#define PM1_EN 0x02 -#define PCIEXPWAK_DIS (1 << 14) -#define RTC_EN (1 << 10) -#define PWRBTN_EN (1 << 8) -#define GBL_EN (1 << 5) -#define TMROF_EN (1 << 0) -#define PM1_CNT 0x04 -#define GBL_RLS (1 << 2) -#define BM_RLD (1 << 1) -#define SCI_EN (1 << 0) -#define PM1_TMR 0x08 -#define PROC_CNT 0x10 -#define LV2 0x14 -#define LV3 0x15 -#define LV4 0x16 -#define PM2_CNT 0x50 // mobile only -#define GPE0_STS 0x20 -#define PME_B0_STS (1 << 13) -#define PME_STS (1 << 11) -#define BATLOW_STS (1 << 10) -#define PCI_EXP_STS (1 << 9) -#define RI_STS (1 << 8) -#define SMB_WAK_STS (1 << 7) -#define TCOSCI_STS (1 << 6) -#define SWGPE_STS (1 << 2) -#define HOT_PLUG_STS (1 << 1) -#define GPE0_EN 0x28 -#define PME_B0_EN (1 << 13) -#define PME_EN (1 << 11) -#define TCOSCI_EN (1 << 6) -#define SMI_EN 0x30 -#define INTEL_USB2_EN (1 << 18) // Intel-Specific USB2 SMI logic -#define LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic -#define PERIODIC_EN (1 << 14) // SMI on PERIODIC_STS in SMI_STS -#define TCO_EN (1 << 13) // Enable TCO Logic (BIOSWE et al) -#define MCSMI_EN (1 << 11) // Trap microcontroller range access -#define BIOS_RLS (1 << 7) // asserts SCI on bit set -#define SWSMI_TMR_EN (1 << 6) // start software smi timer on bit set -#define APMC_EN (1 << 5) // Writes to APM_CNT cause SMI# -#define SLP_SMI_EN (1 << 4) // Write to SLP_EN in PM1_CNT asserts SMI# -#define LEGACY_USB_EN (1 << 3) // Legacy USB circuit SMI logic -#define BIOS_EN (1 << 2) // Assert SMI# on setting GBL_RLS bit -#define EOS (1 << 1) // End of SMI (deassert SMI#) -#define GBL_SMI_EN (1 << 0) // SMI# generation at all? -#define SMI_STS 0x34 -#define ALT_GP_SMI_EN 0x38 -#define ALT_GP_SMI_STS 0x3a -#define GPE_CNTL 0x42 -#define DEVACT_STS 0x44 -#define PM2A_CNT_BLK 0x50 -#define SS_CNT 0x50 -#define C3_RES 0x54 -#define TCO1_STS 0x64 -#define DMISCI_STS (1 << 9) -#define TCO2_STS 0x66 -#define TCO1_CNT 0x68 -#define TCO_TMR_HALT (1 << 11) -#define TCO_LOCK (1 << 12) - -/* - * SPI Opcode Menu setup for SPIBAR lockdown - * should support most common flash chips. - */ - -#define SPI_OPMENU_0 0x01 /* WRSR: Write Status Register */ -#define SPI_OPTYPE_0 0x01 /* Write, no address */ - -#define SPI_OPMENU_1 0x02 /* BYPR: Byte Program */ -#define SPI_OPTYPE_1 0x03 /* Write, address required */ - -#define SPI_OPMENU_2 0x03 /* READ: Read Data */ -#define SPI_OPTYPE_2 0x02 /* Read, address required */ - -#define SPI_OPMENU_3 0x05 /* RDSR: Read Status Register */ -#define SPI_OPTYPE_3 0x00 /* Read, no address */ - -#define SPI_OPMENU_4 0x20 /* SE20: Sector Erase 0x20 */ -#define SPI_OPTYPE_4 0x03 /* Write, address required */ - -#define SPI_OPMENU_5 0x9f /* RDID: Read ID */ -#define SPI_OPTYPE_5 0x00 /* Read, no address */ - -#define SPI_OPMENU_6 0xd8 /* BED8: Block Erase 0xd8 */ -#define SPI_OPTYPE_6 0x03 /* Write, address required */ - -#define SPI_OPMENU_7 0x0b /* FAST: Fast Read */ -#define SPI_OPTYPE_7 0x02 /* Read, address required */ - -#define SPI_OPMENU_UPPER ((SPI_OPMENU_7 << 24) | (SPI_OPMENU_6 << 16) | \ - (SPI_OPMENU_5 << 8) | SPI_OPMENU_4) -#define SPI_OPMENU_LOWER ((SPI_OPMENU_3 << 24) | (SPI_OPMENU_2 << 16) | \ - (SPI_OPMENU_1 << 8) | SPI_OPMENU_0) - -#define SPI_OPTYPE ((SPI_OPTYPE_7 << 14) | (SPI_OPTYPE_6 << 12) | \ - (SPI_OPTYPE_5 << 10) | (SPI_OPTYPE_4 << 8) | \ - (SPI_OPTYPE_3 << 6) | (SPI_OPTYPE_2 << 4) | \ - (SPI_OPTYPE_1 << 2) | (SPI_OPTYPE_0)) - -#define SPI_OPPREFIX ((0x50 << 8) | 0x06) /* EWSR and WREN */ - -#define SPIBAR_HSFS 0x04 /* SPI hardware sequence status */ -#define SPIBAR_HSFS_SCIP (1 << 5) /* SPI Cycle In Progress */ -#define SPIBAR_HSFS_AEL (1 << 2) /* SPI Access Error Log */ -#define SPIBAR_HSFS_FCERR (1 << 1) /* SPI Flash Cycle Error */ -#define SPIBAR_HSFS_FDONE (1 << 0) /* SPI Flash Cycle Done */ -#define SPIBAR_HSFC 0x06 /* SPI hardware sequence control */ -#define SPIBAR_HSFC_BYTE_COUNT(c) (((c - 1) & 0x3f) << 8) -#define SPIBAR_HSFC_CYCLE_READ (0 << 1) /* Read cycle */ -#define SPIBAR_HSFC_CYCLE_WRITE (2 << 1) /* Write cycle */ -#define SPIBAR_HSFC_CYCLE_ERASE (3 << 1) /* Erase cycle */ -#define SPIBAR_HSFC_GO (1 << 0) /* GO: start SPI transaction */ -#define SPIBAR_FADDR 0x08 /* SPI flash address */ -#define SPIBAR_FDATA(n) (0x3810 + (4 * n)) /* SPI flash data */ - -/* HPET Registers - Base is set in hardware to 0xFED00000 */ -#define HPET_GCID 0xFED00000 /* General Capabilities and ID */ -#define HPET_GCFG 0xFED00010 /* General Configuration */ -#define HPET_GIS 0xFED00020 /* General Interrupt Status */ -#define HPET_MCV 0xFED000F0 /* Main Counter Value */ -#define HPET_T0C 0xFED00100 /* Timer 0 Configuration and Capabilities */ -#define HPET_T0CV_L 0xFED00108 /* Lower Timer 0 Comparator Value */ -#define HPET_T0CV_U 0xFED0010C /* Upper Timer 0 Comparator Value */ -#define HPET_T1C 0xFED00120 /* Timer 1 Configuration and Capabilities */ -#define HPET_T1CV 0xFED00128 /* Timer 1 Comparator Value */ -#define HPET_T2C 0xFED00140 /* Timer 2 Configuration and Capabilities */ -#define HPET_T2CV 0xFED00148 /* Timer 2 Comparator Value */ - - -#endif /* __ACPI__ */ -#endif /* SOUTHBRIDGE_INTEL_RANGELEY_SOC_H */ |