diff options
Diffstat (limited to 'src/southbridge/broadcom/bcm5785/bcm5785_smbus.h')
-rw-r--r-- | src/southbridge/broadcom/bcm5785/bcm5785_smbus.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/src/southbridge/broadcom/bcm5785/bcm5785_smbus.h b/src/southbridge/broadcom/bcm5785/bcm5785_smbus.h new file mode 100644 index 0000000000..5f2f7717a0 --- /dev/null +++ b/src/southbridge/broadcom/bcm5785/bcm5785_smbus.h @@ -0,0 +1,184 @@ +/* + * Copyright 2005 AMD + * by yinghai.lu@amd.com + */ +#include <device/smbus_def.h> + +#define SMBHSTSTAT 0x0 +#define SMBSLVSTAT 0x1 +#define SMBHSTCTRL 0x2 +#define SMBHSTCMD 0x3 +#define SMBHSTADDR 0x4 +#define SMBHSTDAT0 0x5 +#define SMBHSTDAT1 0x6 +#define SMBHSTBLKDAT 0x7 + +#define SMBSLVCTRL 0x8 +#define SMBSLVCMD_SHADOW 0x9 +#define SMBSLVEVT 0xa +#define SMBSLVDAT 0xc + + +/* Between 1-10 seconds, We should never timeout normally + * Longer than this is just painful when a timeout condition occurs. + */ +#define SMBUS_TIMEOUT (100*1000*10) + +static inline void smbus_delay(void) +{ + outb(0x80, 0x80); +} + +static int smbus_wait_until_ready(unsigned smbus_io_base) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; + if (val == 0) { // ready now + return 0; + } + outb(val, smbus_io_base + SMBHSTSTAT); + } while(--loops); + return -2; // time out +} + +static int smbus_wait_until_done(unsigned smbus_io_base) +{ + unsigned long loops; + loops = SMBUS_TIMEOUT; + do { + unsigned char val; + + val = inb(smbus_io_base + SMBHSTSTAT); + val &= 0x1f; // mask off reserved bits + if ( val & 0x1c) { + return -5; // error + } + if ( val == 0x02) { + outb(val, smbus_io_base + SMBHSTSTAT); // clear status + return 0; // + } + } while(--loops); + return -3; // timeout +} + +static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device) +{ + uint8_t byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; // not ready + } + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1)|1 , smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; // Clear [4:2] + byte |= (1<<2) | (1<<6); // Byte data read/write command, start the command + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; // timeout or error + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTCMD); + + return byte; + +} +static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned char val) +{ + uint8_t byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; // not ready + } + + /* set the command... */ + outb(val, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1)|0 , smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; // Clear [4:2] + byte |= (1<<2) | (1<<6); // Byte data read/write command, start the command + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; // timeout or error + } + + return 0; + +} + + +static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address) +{ + uint8_t byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; // not ready + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1)|1 , smbus_io_base + SMBHSTADDR); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; // Clear [4:2] + byte |= (1<<3) | (1<<6); // Byte data read/write command, start the command + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; // timeout or error + } + + /* read results of transaction */ + byte = inb(smbus_io_base + SMBHSTDAT0); + + return byte; +} +static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val) +{ + uint8_t byte; + + if (smbus_wait_until_ready(smbus_io_base) < 0) { + return -2; // not ready + } + + /* set the command/address... */ + outb(address & 0xff, smbus_io_base + SMBHSTCMD); + + /* set the device I'm talking too */ + outb(((device & 0x7f) << 1)|0 , smbus_io_base + SMBHSTADDR); + + /* output value */ + outb(val, smbus_io_base + SMBHSTDAT0); + + byte = inb(smbus_io_base + SMBHSTCTRL); + byte &= 0xe3; // Clear [4:2] + byte |= (1<<3) | (1<<6); // Byte data read/write command, start the command + outb(byte, smbus_io_base + SMBHSTCTRL); + + /* poll for transaction completion */ + if (smbus_wait_until_done(smbus_io_base) < 0) { + return -3; // timeout or error + } + + return 0; + +} + + |