summaryrefslogtreecommitdiff
path: root/src/southbridge/amd
diff options
context:
space:
mode:
Diffstat (limited to 'src/southbridge/amd')
-rw-r--r--src/southbridge/amd/agesa/hudson/early_setup.c1
-rw-r--r--src/southbridge/amd/agesa/hudson/imc.c23
-rw-r--r--src/southbridge/amd/agesa/hudson/smbus_spd.c10
-rw-r--r--src/southbridge/amd/cimx/sb800/bootblock.c5
-rw-r--r--src/southbridge/amd/cimx/sb800/early.c7
-rw-r--r--src/southbridge/amd/cimx/sb800/late.c6
-rw-r--r--src/southbridge/amd/pi/hudson/early_setup.c26
-rw-r--r--src/southbridge/amd/pi/hudson/imc.c25
-rw-r--r--src/southbridge/amd/pi/hudson/smbus_spd.c10
9 files changed, 50 insertions, 63 deletions
diff --git a/src/southbridge/amd/agesa/hudson/early_setup.c b/src/southbridge/amd/agesa/hudson/early_setup.c
index 639a5e8764..090a85288b 100644
--- a/src/southbridge/amd/agesa/hudson/early_setup.c
+++ b/src/southbridge/amd/agesa/hudson/early_setup.c
@@ -17,6 +17,7 @@
#define _HUDSON_EARLY_SETUP_C_
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include <amdblocks/acpimmio.h>
diff --git a/src/southbridge/amd/agesa/hudson/imc.c b/src/southbridge/amd/agesa/hudson/imc.c
index 1d63c1e36a..934d1e95da 100644
--- a/src/southbridge/amd/agesa/hudson/imc.c
+++ b/src/southbridge/amd/agesa/hudson/imc.c
@@ -14,6 +14,7 @@
*/
#include "imc.h"
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <Porting.h>
#include <AGESA.h>
@@ -22,24 +23,22 @@
#include <Proc/Fch/Common/FchCommonCfg.h>
#include <Proc/Fch/FchPlatform.h>
-#define VACPI_MMIO_VBASE ((u8 *)ACPI_MMIO_BASE)
-
void imc_reg_init(void)
{
/* Init Power Management Block 2 (PM2) Registers.
* Check BKDG for AMD Family 16h for details. */
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x00, 0x06);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x01, 0x06);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x02, 0xf7);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x03, 0xff);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x04, 0xff);
+ pm2_write8(0, 0x06);
+ pm2_write8(1, 0x06);
+ pm2_write8(2, 0xf7);
+ pm2_write8(3, 0xff);
+ pm2_write8(4, 0xff);
#if !CONFIG(SOUTHBRIDGE_AMD_AGESA_YANGTZE)
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x10, 0x06);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x11, 0x06);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x12, 0xf7);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x13, 0xff);
- write8(VACPI_MMIO_VBASE + PMIO2_BASE + 0x14, 0xff);
+ pm2_write8(0x10, 0x06);
+ pm2_write8(0x11, 0x06);
+ pm2_write8(0x12, 0xf7);
+ pm2_write8(0x13, 0xff);
+ pm2_write8(0x14, 0xff);
#endif
#if CONFIG(SOUTHBRIDGE_AMD_AGESA_YANGTZE)
diff --git a/src/southbridge/amd/agesa/hudson/smbus_spd.c b/src/southbridge/amd/agesa/hudson/smbus_spd.c
index 8eb36f46ee..9ddae38c5b 100644
--- a/src/southbridge/amd/agesa/hudson/smbus_spd.c
+++ b/src/southbridge/amd/agesa/hudson/smbus_spd.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <device/pci_def.h>
#include <device/device.h>
#include <console/console.h>
@@ -126,16 +127,9 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
return 0;
}
-static void writePmReg (int reg, int data)
-{
- __outbyte (0xCD6, reg);
- __outbyte (0xCD7, data);
-}
-
static void setupFch (int ioBase)
{
- writePmReg (0x2D, ioBase >> 8);
- writePmReg (0x2C, ioBase | 1);
+ pm_write16(0x2c, ioBase | 1);
__outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
}
diff --git a/src/southbridge/amd/cimx/sb800/bootblock.c b/src/southbridge/amd/cimx/sb800/bootblock.c
index 5decebfac4..6e0b54434c 100644
--- a/src/southbridge/amd/cimx/sb800/bootblock.c
+++ b/src/southbridge/amd/cimx/sb800/bootblock.c
@@ -83,7 +83,6 @@ static void enable_spi_fast_mode(void)
static void enable_clocks(void)
{
u32 reg32;
- volatile u32 *acpi_mmio = (void *) (0xFED80000 + 0xE00 + 0x40);
// Program SB800 MiscClkCntrl register to configure clock output on the
// 14M_25M_48M_OSC ball usually used for the Super-I/O.
@@ -91,12 +90,12 @@ static void enable_clocks(void)
// which is the SB800's power up default. We could switch back to 14
// in the mainboard's romstage.c, but then the clock frequency would
// change twice.
- reg32 = *acpi_mmio;
+ reg32 = misc_read32(0x40);
reg32 &= ~((1 << 2) | (3 << 0)); // enable, 14 MHz (power up default)
#if !CONFIG(SUPERIO_WANTS_14MHZ_CLOCK)
reg32 |= 2 << 0; // Device_CLK1_sel = 48 MHz
#endif
- *acpi_mmio = reg32;
+ misc_write32(0x40, reg32);
}
void bootblock_early_southbridge_init(void)
diff --git a/src/southbridge/amd/cimx/sb800/early.c b/src/southbridge/amd/cimx/sb800/early.c
index 48829578e1..2ee4d40230 100644
--- a/src/southbridge/amd/cimx/sb800/early.c
+++ b/src/southbridge/amd/cimx/sb800/early.c
@@ -14,6 +14,7 @@
*/
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include "SBPLATFORM.h"
#include "sb_cimx.h"
#include "cfg.h" /*sb800_cimx_config*/
@@ -41,9 +42,7 @@ void sb_Poweron_Init(void)
*/
void sb800_clk_output_48Mhz(void)
{
- /* AcpiMMioDecodeEn */
- RWPMIO(SB_PMIOA_REG24, AccWidthUint8, ~(BIT0 + BIT1), BIT0);
- *(volatile u32 *)(ACPI_MMIO_BASE + MISC_BASE + 0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */
- *(volatile u32 *)(ACPI_MMIO_BASE + MISC_BASE + 0x40) |= 1 << 1; /* 48Mhz */
+ misc_write32(0x40, misc_read32(0x40) & (~5));
+ misc_write32(0x40, misc_read32(0x40) | 2);
}
diff --git a/src/southbridge/amd/cimx/sb800/late.c b/src/southbridge/amd/cimx/sb800/late.c
index 4233a6ff0d..d6003bede2 100644
--- a/src/southbridge/amd/cimx/sb800/late.c
+++ b/src/southbridge/amd/cimx/sb800/late.c
@@ -14,7 +14,7 @@
* GNU General Public License for more details.
*/
-
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <device/device.h>
#include <device/pci.h> /* device_operations */
@@ -400,9 +400,9 @@ static void sb800_enable(struct device *dev)
* to function as GPIO {GPIO 35:0}.
*/
if (!sb_chip->disconnect_pcib && dev->enabled)
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 0);
+ pm_write8(0xea, pm_read8(0xea) & 0xfe);
else
- RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, BIT0);
+ pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1);
break;
case PCI_DEVFN(0x14, 6): /* 0:14:6 GEC */
diff --git a/src/southbridge/amd/pi/hudson/early_setup.c b/src/southbridge/amd/pi/hudson/early_setup.c
index 191a96c7d4..fe75115233 100644
--- a/src/southbridge/amd/pi/hudson/early_setup.c
+++ b/src/southbridge/amd/pi/hudson/early_setup.c
@@ -18,6 +18,7 @@
#include <assert.h>
#include <stdint.h>
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <console/console.h>
@@ -36,18 +37,17 @@ void configure_hudson_uart(void)
{
u8 byte;
- byte = read8((void *)(ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 +
- CONFIG_UART_FOR_CONSOLE * sizeof(u16)));
- byte |= 1 << 3;
- write8((void *)(ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 +
- CONFIG_UART_FOR_CONSOLE * sizeof(u16)), byte);
- byte = read8((void *)(ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62));
+ byte = aoac_read8(FCH_AOAC_REG56 +
+ CONFIG_UART_FOR_CONSOLE * sizeof(u16)));
byte |= 1 << 3;
- write8((void *)(ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62), byte);
- write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0);
- write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0);
- write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0);
- write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
+ aoac_write8(FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * sizeof(u16)),
+ byte);
+
+ aoac_write8(FCH_AOAC_REG62, aoac_read8(FCH_AOAC_REG62) | (1 << 3));
+ iomux_write8(0x89, 0); /* UART0_RTS_L_EGPIO137 */
+ iomux_write8(0x8a, 0); /* UART0_TXD_EGPIO138 */
+ iomux_write8(0x8e, 0); /* UART1_RTS_L_EGPIO142 */
+ iomux_write8(0x8f, 0); /* UART1_TXD_EGPIO143 */
udelay(2000);
write8((void *)(0xFEDC6000 + 0x2000 * CONFIG_UART_FOR_CONSOLE + 0x88),
@@ -229,11 +229,11 @@ void hudson_clk_output_48Mhz(void)
* Enable the X14M_25M_48M_OSC pin and leaving it at it's default so
* 48Mhz will be on ball AP13 (FT3b package)
*/
- ctrl = read32((void *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40));
+ ctrl = misc_read32(FCH_MISC_REG40);
/* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */
ctrl &= (u32)~(1<<2);
- write32((void *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40), ctrl);
+ misc_write32(FCH_MISC_REG40, ctrl);
}
static uintptr_t hudson_spibase(void)
diff --git a/src/southbridge/amd/pi/hudson/imc.c b/src/southbridge/amd/pi/hudson/imc.c
index 6a01a764cb..3c6054d147 100644
--- a/src/southbridge/amd/pi/hudson/imc.c
+++ b/src/southbridge/amd/pi/hudson/imc.c
@@ -16,6 +16,7 @@
#define __SIMPLE_DEVICE__
#include "imc.h"
+#include <amdblocks/acpimmio.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/device.h>
@@ -26,24 +27,24 @@
#include <Proc/Fch/Fch.h>
#include <Proc/Fch/FchPlatform.h>
-#define VACPI_MMIO_VBASE ((u8 *)ACPI_MMIO_BASE)
-
void imc_reg_init(void)
{
u8 reg8;
/* Init Power Management Block 2 (PM2) Registers.
* Check BKDG for AMD Family 16h for details. */
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x00), 0x06);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x01), 0x06);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x02), 0xf7);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x03), 0xff);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x04), 0xff);
+ /* Init Power Management Block 2 (PM2) Registers.
+ * Check BKDG for AMD Family 16h for details. */
+ pm2_write8(0, 0x06);
+ pm2_write8(1, 0x06);
+ pm2_write8(2, 0xf7);
+ pm2_write8(3, 0xff);
+ pm2_write8(4, 0xff);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x10), 0x06);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x11), 0x06);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x12), 0xf7);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x13), 0xff);
- write8((VACPI_MMIO_VBASE + PMIO2_BASE + 0x14), 0xff);
+ pm2_write8(0x10, 0x06);
+ pm2_write8(0x11, 0x06);
+ pm2_write8(0x12, 0xf7);
+ pm2_write8(0x13, 0xff);
+ pm2_write8(0x14, 0xff);
reg8 = pci_read_config8(PCI_DEV(0, 0x18, 0x3), 0x1E4);
reg8 &= 0x8F;
diff --git a/src/southbridge/amd/pi/hudson/smbus_spd.c b/src/southbridge/amd/pi/hudson/smbus_spd.c
index c49ccffc4d..8523db5054 100644
--- a/src/southbridge/amd/pi/hudson/smbus_spd.c
+++ b/src/southbridge/amd/pi/hudson/smbus_spd.c
@@ -13,6 +13,7 @@
* GNU General Public License for more details.
*/
+#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/device.h>
@@ -127,16 +128,9 @@ static int readspd (int iobase, int SmbusSlaveAddress, char *buffer, int count)
return 0;
}
-static void writePmReg (int reg, int data)
-{
- __outbyte (0xCD6, reg);
- __outbyte (0xCD7, data);
-}
-
static void setupFch (int ioBase)
{
- writePmReg (0x2D, ioBase >> 8);
- writePmReg (0x2C, ioBase | 1);
+ pm_write16(0x2c, ioBase | 1);
__outbyte (ioBase + 0x0E, 66000000 / 400000 / 4); // set SMBus clock to 400 KHz
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 20:09:51 +0000