diff options
Diffstat (limited to 'src/southbridge/amd/sb700/sb700_hda.c')
-rw-r--r-- | src/southbridge/amd/sb700/sb700_hda.c | 232 |
1 files changed, 232 insertions, 0 deletions
diff --git a/src/southbridge/amd/sb700/sb700_hda.c b/src/southbridge/amd/sb700/sb700_hda.c new file mode 100644 index 0000000000..edff6022dc --- /dev/null +++ b/src/southbridge/amd/sb700/sb700_hda.c @@ -0,0 +1,232 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2010 Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/device.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <device/pci_ops.h> +#include <arch/io.h> +#include <delay.h> +#include "sb700.h" + +#define HDA_ICII_REG 0x68 +#define HDA_ICII_BUSY (1 << 0) +#define HDA_ICII_VALID (1 << 1) + +static int set_bits(u8 * port, u32 mask, u32 val) +{ + u32 dword; + int count; + + /* Write (val & ~mask) to port */ + val &= mask; + dword = read32(port); + dword &= ~mask; + dword |= val; + write32(port, dword); + + /* Wait for readback of register to + * match what was just written to it + */ + count = 50; + do { + /* Wait 1ms based on BKDG wait time */ + mdelay(1); + dword = read32(port); + dword &= mask; + } while ((dword != val) && --count); + + /* Timeout occured */ + if (!count) + return -1; + return 0; +} + +static u32 codec_detect(u8 * base) +{ + u32 dword; + + /* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 0) == -1) + goto no_codec; + + /* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */ + if (set_bits(base + 0x08, 1, 1) == -1) + goto no_codec; + + /* Delay for 1 ms since the BKDG does */ + mdelay(1); + + /* Read in Codec location (BAR + 0xe)[3..0]*/ + dword = read32(base + 0xe); + dword &= 0x0F; + if (!dword) + goto no_codec; + + return dword; + +no_codec: + /* Codec Not found */ + /* Put HDA back in reset (BAR + 0x8) [0] */ + set_bits(base + 0x08, 1, 0); + printk_debug("No codec!\n"); + return 0; +} + +/** + * Wait 50usec for for the codec to indicate it is ready + * no response would imply that the codec is non-operative + */ +static int wait_for_ready(u8 *base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + + while(timeout--) { + u32 dword=read32(base + HDA_ICII_REG); + if (!(dword & HDA_ICII_BUSY)) + return 0; + udelay(1); + } + + return -1; +} + +/** + * Wait 50usec for for the codec to indicate that it accepted + * the previous command. No response would imply that the code + * is non-operative + */ +static int wait_for_valid(u8 *base) +{ + /* Use a 50 usec timeout - the Linux kernel uses the + * same duration */ + + int timeout = 50; + while(timeout--) { + u32 dword = read32(base + HDA_ICII_REG); + if ((dword & (HDA_ICII_VALID | HDA_ICII_BUSY)) == + HDA_ICII_VALID) + return 0; + udelay(1); + } + + return 1; +} + +static void codec_init(u8 * base, int addr) +{ + u32 dword; + + /* 1 */ + if (wait_for_ready(base) == -1) + return; + + dword = (addr << 28) | 0x000f0000; + write32(base + 0x60, dword); + + if (wait_for_valid(base) == -1) + return; + + dword = read32(base + 0x64); + + /* 2 */ + printk_debug("%x(th) codec viddid: %08x\n", addr, dword); +} + +static void codecs_init(u8 * base, u32 codec_mask) +{ + int i; + for (i = 2; i >= 0; i--) { + if (codec_mask & (1 << i)) + codec_init(base, i); + } +} + +static void hda_init(struct device *dev) +{ + u8 byte; + u32 dword; + u8 *base; + struct resource *res; + u32 codec_mask; + device_t sm_dev; + + /* Enable azalia - PM_io 0x59[3], no ac97 in sb700. */ + byte = pm_ioread(0x59); + byte |= 1 << 3; + pm_iowrite(0x59, byte); + + /* Find the SMBus */ + /* FIXME: Need to find out why the call below crashes. */ + /*sm_dev = dev_find_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_ATI_SB700_SM, 0);*/ + sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0)); + + /* Set routing pin - SMBus ExtFunc (0xf8/0xfc) */ + pci_write_config32(sm_dev, 0xf8, 0x00); + pci_write_config8(sm_dev, 0xfc, 0xAA); + /* Set INTA - SMBus 0x63 [2..0] */ + byte = pci_read_config8(sm_dev, 0x63); + byte &= ~0x7; + byte |= 0x0; /* INTA:0x0 - INTH:0x7 */ + pci_write_config8(sm_dev, 0x63, byte); + + /* Program the 2C to 0x437b1002 */ + dword = 0x437b1002; + pci_write_config32(dev, 0x2c, dword); + + /* Read in BAR */ + /* Is this right? HDA allows for a 64-bit BAR + * but this is only setup for a 32-bit one + */ + res = find_resource(dev, 0x10); + if (!res) + return; + + base = (u8 *) ((u32)res->base); + printk_debug("base = %p\n", base); + codec_mask = codec_detect(base); + + if (codec_mask) { + printk_debug("codec_mask = %02x\n", codec_mask); + codecs_init(base, codec_mask); + } +} + +static struct pci_operations lops_pci = { + .set_subsystem = pci_dev_set_subsystem, +}; + +static struct device_operations hda_audio_ops = { + .read_resources = pci_dev_read_resources, + .set_resources = pci_dev_set_resources, + .enable_resources = pci_dev_enable_resources, + .init = hda_init, + .scan_bus = 0, + .ops_pci = &lops_pci, +}; + +static struct pci_driver hdaaudio_driver __pci_driver = { + .ops = &hda_audio_ops, + .vendor = PCI_VENDOR_ID_ATI, + .device = PCI_DEVICE_ID_ATI_SB700_HDA, +}; |