1 files changed, 0 insertions, 87 deletions
diff --git a/src/southbridge/amd/sb700/ide.c b/src/southbridge/amd/sb700/ide.c
deleted file mode 100644
index 070ee67d9c..0000000000
--- a/src/southbridge/amd/sb700/ide.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <option.h>
-#include <types.h>
-
-#include "sb700.h"
-#include "chip.h"
-
-static void ide_init(struct device *dev)
-{
-	struct southbridge_amd_sb700_config *conf;
-	/* Enable ide devices so the linux ide driver will work */
-	u32 dword;
-	u8 byte;
-	uint8_t nvram;
-	uint8_t sata_ahci_mode;
-
-	sata_ahci_mode = 0;
-	if (get_option(&nvram, "sata_ahci_mode") == CB_SUCCESS)
-		sata_ahci_mode = !!nvram;
-
-	conf = dev->chip_info;
-
-	/* RPR9.1 disable MSI */
-	/* TODO: For A14, it should set as 1. I doubt it. */
-	dword = pci_read_config32(dev, 0x70);
-	dword &= ~(1 << 16);
-	pci_write_config32(dev, 0x70, dword);
-
-	if (!sata_ahci_mode) {
-		/* Enable UDMA on all devices, it will become UDMA0 (default PIO is PIO0) */
-		byte = pci_read_config8(dev, 0x54);
-		byte |= 0xf;
-		pci_write_config8(dev, 0x54, byte);
-
-		/* Enable I/O Access&& Bus Master */
-		dword = pci_read_config16(dev, 0x4);
-		dword |= 1 << 2;
-		pci_write_config16(dev, 0x4, dword);
-
-		/* set ide as primary, if you want to boot from IDE, you'd better set it
-		 * in $vendor/$mainboard/devicetree.cb */
-		if (conf->boot_switch_sata_ide == 1) {
-			struct device *sm_dev = pcidev_on_root(0x14, 0);
-			byte = pci_read_config8(sm_dev, 0xad);
-			byte |= 1 << 4;
-			pci_write_config8(sm_dev, 0xad, byte);
-		}
-	}
-}
-
-static struct pci_operations lops_pci = {
-	.set_subsystem = pci_dev_set_subsystem,
-};
-
-static struct device_operations ide_ops = {
-	.read_resources = pci_dev_read_resources,
-	.set_resources = pci_dev_set_resources,
-	.enable_resources = pci_dev_enable_resources,
-	.init = ide_init,
-	.scan_bus = 0,
-	.ops_pci = &lops_pci,
-};
-
-static const struct pci_driver ide_driver __pci_driver = {
-	.ops = &ide_ops,
-	.vendor = PCI_VENDOR_ID_ATI,
-	.device = PCI_DEVICE_ID_ATI_SB700_IDE,
-};