diff options
Diffstat (limited to 'src/southbridge/amd/rs780/rs780_early_setup.c')
-rw-r--r-- | src/southbridge/amd/rs780/rs780_early_setup.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/src/southbridge/amd/rs780/rs780_early_setup.c b/src/southbridge/amd/rs780/rs780_early_setup.c index 5b9616f3ca..159d51f52e 100644 --- a/src/southbridge/amd/rs780/rs780_early_setup.c +++ b/src/southbridge/amd/rs780/rs780_early_setup.c @@ -147,25 +147,25 @@ static void get_cpu_rev() u32 eax; eax = cpuid_eax(1); - printk_info("get_cpu_rev EAX=0x%x.\n", eax); + printk(BIOS_INFO, "get_cpu_rev EAX=0x%x.\n", eax); if (eax <= 0xfff) - printk_info("CPU Rev is K8_Cx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Cx.\n"); else if (eax <= 0x10fff) - printk_info("CPU Rev is K8_Dx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Dx.\n"); else if (eax <= 0x20fff) - printk_info("CPU Rev is K8_Ex.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Ex.\n"); else if (eax <= 0x40fff) - printk_info("CPU Rev is K8_Fx.\n"); + printk(BIOS_INFO, "CPU Rev is K8_Fx.\n"); else if (eax == 0x60fb1 || eax == 0x60f81) /*These two IDS are exception, they are G1. */ - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else if (eax <= 0X60FF0) - printk_info("CPU Rev is K8_G0.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G0.\n"); else if (eax <= 0x100000) - printk_info("CPU Rev is K8_G1.\n"); + printk(BIOS_INFO, "CPU Rev is K8_G1.\n"); else if (eax <= 0x100f00) - printk_info("CPU Rev is Fam 10.\n"); + printk(BIOS_INFO, "CPU Rev is Fam 10.\n"); else - printk_info("CPU Rev is K8_10.\n"); + printk(BIOS_INFO, "CPU Rev is K8_10.\n"); } static u8 is_famly10() @@ -246,7 +246,7 @@ static void rs780_htinit() ************************/ reg = pci_read_config32(cpu_f0, 0x88); cpu_ht_freq = (reg & 0xf00) >> 8; - printk_info("rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); + printk(BIOS_INFO, "rs780_htinit cpu_ht_freq=%x.\n", cpu_ht_freq); rs780_f0 = PCI_DEV(0, 0, 0); //set_nbcfg_enable_bits(rs780_f0, 0xC8, 0x7<<24 | 0x7<<28, 1<<24 | 1<<28); @@ -260,7 +260,7 @@ static void rs780_htinit() * So we check 6 only, it would be faster. */ if ((cpu_ht_freq == 0x6) || (cpu_ht_freq == 0x5) || (cpu_ht_freq == 0x4) || (cpu_ht_freq == 0x2) || (cpu_ht_freq == 0x0)) { - printk_info("rs780_htinit: HT1 mode\n"); + printk(BIOS_INFO, "rs780_htinit: HT1 mode\n"); /* HT1 mode, RPR 8.4.2 */ /* set IBIAS code */ @@ -268,7 +268,7 @@ static void rs780_htinit() /* Optimizes chipset HT transmitter drive strength */ set_htiu_enable_bits(rs780_f0, 0x2A, 0x3, 0x1); } else if ((cpu_ht_freq > 0x6) && (cpu_ht_freq < 0xf)) { - printk_info("rs780_htinit: HT3 mode\n"); + printk(BIOS_INFO, "rs780_htinit: HT3 mode\n"); #if CONFIG_NORTHBRIDGE_AMD_AMDFAM10 == 1 /* save some spaces */ /* HT3 mode, RPR 8.4.3 */ @@ -330,7 +330,7 @@ static void k8_optimization() device_t k8_f0, k8_f2, k8_f3; msr_t msr; - printk_info("k8_optimization()\n"); + printk(BIOS_INFO, "k8_optimization()\n"); k8_f0 = PCI_DEV(0, 0x18, 0); k8_f2 = PCI_DEV(0, 0x18, 2); k8_f3 = PCI_DEV(0, 0x18, 3); @@ -373,7 +373,7 @@ void fam10_optimization() msr_t msr; u32 val; - printk_info("fam10_optimization()\n"); + printk(BIOS_INFO, "fam10_optimization()\n"); cpu_f0 = PCI_DEV(0, 0x18, 0); cpu_f2 = PCI_DEV(0, 0x18, 2); @@ -612,7 +612,7 @@ static void rs780_por_htiu_index_init(device_t nb_dev) *****************************************/ static void rs780_por_init(device_t nb_dev) { - printk_info("rs780_por_init\n"); + printk(BIOS_INFO, "rs780_por_init\n"); /* ATINB_PCICFG_POR_TABLE, initialize the values for rs780 PCI Config registers */ rs780_por_pcicfg_init(nb_dev); @@ -642,20 +642,20 @@ static void rs780_before_pci_init() static void rs780_early_setup() { device_t nb_dev = PCI_DEV(0, 0, 0); - printk_info("rs780_early_setup()\n"); + printk(BIOS_INFO, "rs780_early_setup()\n"); get_cpu_rev(); - /* The printk_info(s) below cause the system unstable. */ + /* The printk(BIOS_INFO, s) below cause the system unstable. */ switch (get_nb_rev(nb_dev)) { case REV_RS780_A11: - /* printk_info("NB Revision is A11.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A11.\n"); */ break; case REV_RS780_A12: - /* printk_info("NB Revision is A12.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A12.\n"); */ break; case REV_RS780_A13: - /* printk_info("NB Revision is A13.\n"); */ + /* printk(BIOS_INFO, "NB Revision is A13.\n"); */ break; } |