diff options
Diffstat (limited to 'src/southbridge/amd/cimx_wrapper/sb800/cfg.h')
-rw-r--r-- | src/southbridge/amd/cimx_wrapper/sb800/cfg.h | 234 |
1 files changed, 0 insertions, 234 deletions
diff --git a/src/southbridge/amd/cimx_wrapper/sb800/cfg.h b/src/southbridge/amd/cimx_wrapper/sb800/cfg.h deleted file mode 100644 index 9fae525cb9..0000000000 --- a/src/southbridge/amd/cimx_wrapper/sb800/cfg.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 Advanced Micro Devices, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _SB800_CFG_H_ -#define _SB800_CFG_H_ - -#include <stdint.h> - -/** - * @def BIOS_SIZE_1M - * @def BIOS_SIZE_2M - * @def BIOS_SIZE_4M - * @def BIOS_SIZE_8M - */ -#define BIOS_SIZE_1M 0 -#define BIOS_SIZE_2M 1 -#define BIOS_SIZE_4M 3 -#define BIOS_SIZE_8M 7 - -/* In SB800, default ROM size is 1M Bytes, if your platform ROM - * bigger than 1M you have to set the ROM size outside CIMx module and - * before AGESA module get call. - */ -#ifndef BIOS_SIZE -#if CONFIG_COREBOOT_ROMSIZE_KB_1024 == 1 - #define BIOS_SIZE BIOS_SIZE_1M -#elif CONFIG_COREBOOT_ROMSIZE_KB_2048 == 1 - #define BIOS_SIZE BIOS_SIZE_2M -#elif CONFIG_COREBOOT_ROMSIZE_KB_4096 == 1 - #define BIOS_SIZE BIOS_SIZE_4M -#elif CONFIG_COREBOOT_ROMSIZE_KB_8192 == 1 - #define BIOS_SIZE BIOS_SIZE_8M -#endif -#endif - -/** - * @def SPREAD_SPECTRUM - * @brief - * 0 - Disable Spread Spectrum function - * 1 - Enable Spread Spectrum function - */ -#define SPREAD_SPECTRUM 0 - -/** - * @def SB_HPET_TIMER - * @breif - * 0 - Disable hpet - * 1 - Enable hpet - */ -#define HPET_TIMER 1 - -/** - * @def USB_CONFIG - * @brief bit[0-6] used to control USB - * 0 - Disable - * 1 - Enable - * Usb Ohci1 Contoller (Bus 0 Dev 18 Func0) is define at BIT0 - * Usb Ehci1 Contoller (Bus 0 Dev 18 Func2) is define at BIT1 - * Usb Ohci2 Contoller (Bus 0 Dev 19 Func0) is define at BIT2 - * Usb Ehci2 Contoller (Bus 0 Dev 19 Func2) is define at BIT3 - * Usb Ohci3 Contoller (Bus 0 Dev 22 Func0) is define at BIT4 - * Usb Ehci3 Contoller (Bus 0 Dev 22 Func2) is define at BIT5 - * Usb Ohci4 Contoller (Bus 0 Dev 20 Func5) is define at BIT6 - */ -#define USB_CINFIG 0x7F - -/** - * @def PCI_CLOCK_CTRL - * @breif bit[0-4] used for PCI Slots Clock Control, - * 0 - disable - * 1 - enable - * PCI SLOT 0 define at BIT0 - * PCI SLOT 1 define at BIT1 - * PCI SLOT 2 define at BIT2 - * PCI SLOT 3 define at BIT3 - * PCI SLOT 4 define at BIT4 - */ -#define PCI_CLOCK_CTRL 0x1F - -/** - * @def SATA_CONTROLLER - * @breif INCHIP Sata Controller - */ -#ifndef SATA_CONTROLLER - #define SATA_CONTROLLER ENABLED -#endif - -/** - * @def SATA_MODE - * @breif INCHIP Sata Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_MODE - #define SATA_MODE NATIVE_IDE_MODE -#endif - -/** - * @breif INCHIP Sata IDE Controller Mode - */ -#define IDE_LEGACY_MODE 0 -#define IDE_NATIVE_MODE 1 - -/** - * @def SATA_IDE_MODE - * @breif INCHIP Sata IDE Controller Mode - * NOTE: DO NOT ALLOW SATA & IDE use same mode - */ -#ifndef SATA_IDE_MODE - #define SATA_IDE_MODE IDE_LEGACY_MODE -#endif - -/** - * @def EXTERNAL_CLOCK - * @brief 00/10: Reference clock from crystal oscillator via - * PAD_XTALI and PAD_XTALO - * - * @def INTERNAL_CLOCK - * @brief 01/11: Reference clock from internal clock through - * CP_PLL_REFCLK_P and CP_PLL_REFCLK_N via RDL - */ -#define EXTERNAL_CLOCK 0x00 -#define INTERNAL_CLOCK 0x01 - -/* NOTE: inagua have to using internal clock, - * otherwise can not detect sata drive - */ -#define SATA_CLOCK_SOURCE INTERNAL_CLOCK - -/** - * @def SATA_PORT_MULT_CAP_RESERVED - * @brief 1 ON, 0 0FF - */ -#define SATA_PORT_MULT_CAP_RESERVED 1 - -/** - * @def AZALIA_AUTO - * @brief Detect Azalia controller automatically. - * - * @def AZALIA_DISABLE - * @brief Disable Azalia controller. - - * @def AZALIA_ENABLE - * @brief Enable Azalia controller. - */ -#define AZALIA_AUTO 0 -#define AZALIA_DISABLE 1 -#define AZALIA_ENABLE 2 - -/** - * @breif INCHIP HDA controller - */ -#ifndef AZALIA_CONTROLLER - #define AZALIA_CONTROLLER AZALIA_AUTO -#endif - -/** - * @def AZALIA_PIN_CONFIG - * @brief - * 0 - disable - * 1 - enable - */ -#ifndef AZALIA_PIN_CONFIG - #define AZALIA_PIN_CONFIG 1 -#endif - -/** - * @def AZALIA_SDIN_PIN - * @brief - * SDIN0 is define at BIT0 & BIT1 - * 00 - GPIO PIN - * 01 - Reserved - * 10 - As a Azalia SDIN pin - * SDIN1 is define at BIT2 & BIT3 - * SDIN2 is define at BIT4 & BIT5 - * SDIN3 is define at BIT6 & BIT7 - */ -#ifndef AZALIA_SDIN_PIN - //#define AZALIA_SDIN_PIN 0xAA - #define AZALIA_SDIN_PIN 0x2A -#endif - -/** - * @def GPP_CONTROLLER - */ -#ifndef GPP_CONTROLLER - #define GPP_CONTROLLER ENABLED -#endif - -/** - * @def GPP_CFGMODE - * @brief GPP Link Configuration - * four possible configuration: - * GPP_CFGMODE_X4000 - * GPP_CFGMODE_X2200 - * GPP_CFGMODE_X2110 - * GPP_CFGMODE_X1111 - */ -#ifndef GPP_CFGMODE - #define GPP_CFGMODE GPP_CFGMODE_X1111 -#endif - -/** - * @brief South Bridge CIMx configuration - */ -void sb800_cimx_config(AMDSBCFG *sb_cfg); - -/** - * @brief Entry point of Southbridge CIMx callout - * - * prototype UINT32 (*SBCIM_HOOK_ENTRY)(UINT32 Param1, UINT32 Param2, void* pConfig) - * - * @param[in] func Southbridge CIMx Function ID. - * @param[in] data Southbridge Input Data. - * @param[in] sb_cfg Southbridge configuration structure pointer. - */ -u32 sb800_callout_entry(u32 func, u32 data, void* sb_cfg); - -#endif |