4 files changed, 110 insertions, 1 deletions
diff --git a/src/southbridge/amd/agesa/hudson/Makefile.inc b/src/southbridge/amd/agesa/hudson/Makefile.inc
index 5cb3755e8b..5c921280f7 100644
--- a/src/southbridge/amd/agesa/hudson/Makefile.inc
+++ b/src/southbridge/amd/agesa/hudson/Makefile.inc
@@ -17,7 +17,12 @@ ramstage-y += sd.c
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += fadt.c
 ramstage-y += reset.c
 
-bootblock-y += enable_usbdebug.c
+ifneq ($(CONFIG_ROMCC_BOOTBLOCK),y)
+bootblock-y += bootblock.c
+bootblock-y += early_setup.c
+bootblock-$(CONFIG_USBDEBUG) += enable_usbdebug.c
+endif
+
 romstage-y += enable_usbdebug.c
 ramstage-y += enable_usbdebug.c
 romstage-y += early_setup.c
diff --git a/src/southbridge/amd/agesa/hudson/bootblock.c b/src/southbridge/amd/agesa/hudson/bootblock.c
index f12cec8602..97e8803f48 100644
--- a/src/southbridge/amd/agesa/hudson/bootblock.c
+++ b/src/southbridge/amd/agesa/hudson/bootblock.c
@@ -60,3 +60,48 @@ static void bootblock_southbridge_init(void)
 {
 	hudson_enable_rom();
 }
+
+
+#if !CONFIG(ROMCC_BOOTBLOCK)
+
+#include <bootblock_common.h>
+#include <amdblocks/acpimmio.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+
+void bootblock_soc_early_init(void)
+{
+	pci_devfn_t dev;
+	u32 data;
+
+	bootblock_southbridge_init();
+	hudson_lpc_decode();
+	enable_acpimmio_decode_pm24();
+
+	dev = PCI_DEV(0, 0x14, 3);
+	data = pci_read_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE);
+	/* enable 0x2e/0x4e IO decoding for SuperIO */
+	pci_write_config32(dev, LPC_IO_OR_MEM_DECODE_ENABLE, data | 3);
+
+	/*
+	 * Enable FCH to decode TPM associated Memory and IO regions for vboot
+	 *
+	 * Enable decoding of TPM cycles defined in TPM 1.2 spec
+	 * Enable decoding of legacy TPM addresses: IO addresses 0x7f-
+	 * 0x7e and 0xef-0xee.
+	 */
+
+	data = pci_read_config32(dev, LPC_TRUSTED_PLATFORM_MODULE);
+	data |= TPM_12_EN | TPM_LEGACY_EN;
+	pci_write_config32(dev, LPC_TRUSTED_PLATFORM_MODULE, data);
+
+	/*
+	 *  In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+	 *  LpcClk[1:0]".  This following register setting has been
+	 *  replicated in every reference design since Parmer, so it is
+	 *  believed to be required even though it is not documented in
+	 *  the SoC BKDGs.  Without this setting, there is no serial
+	 *  output.
+	 */
+	pm_write8(0xd2, 0);
+}
+#endif
diff --git a/src/southbridge/amd/agesa/hudson/early_setup.c b/src/southbridge/amd/agesa/hudson/early_setup.c
index c5e6c25b68..d85cb2b6f1 100644
--- a/src/southbridge/amd/agesa/hudson/early_setup.c
+++ b/src/southbridge/amd/agesa/hudson/early_setup.c
@@ -87,4 +87,22 @@ void hudson_lpc_port80(void)
 	pci_write_config8(dev, 0x4a, byte);
 }
 
+void hudson_lpc_decode(void)
+{
+	pci_devfn_t dev;
+	u32 tmp;
+
+	dev = PCI_DEV(0, 0x14, 3);
+	/* Serial port numeration on Hudson:
+	 * PORT0 - 0x3f8
+	 * PORT1 - 0x2f8
+	 * PORT5 - 0x2e8
+	 * PORT7 - 0x3e8
+	 */
+	tmp =  DECODE_ENABLE_SERIAL_PORT0 | DECODE_ENABLE_SERIAL_PORT1
+	     | DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT7;
+
+	pci_write_config32(dev, LPC_IO_PORT_DECODE_ENABLE, tmp);
+}
+
 #endif /* _HUDSON_EARLY_SETUP_C_ */
diff --git a/src/southbridge/amd/agesa/hudson/hudson.h b/src/southbridge/amd/agesa/hudson/hudson.h
index 4927a3adfd..8a36ea2251 100644
--- a/src/southbridge/amd/agesa/hudson/hudson.h
+++ b/src/southbridge/amd/agesa/hudson/hudson.h
@@ -45,6 +45,46 @@
 #define REV_HUDSON_A11	0x11
 #define REV_HUDSON_A12	0x12
 
+#define LPC_IO_PORT_DECODE_ENABLE	0x44
+#define   DECODE_ENABLE_PARALLEL_PORT0	BIT(0)
+#define   DECODE_ENABLE_PARALLEL_PORT1	BIT(1)
+#define   DECODE_ENABLE_PARALLEL_PORT2	BIT(2)
+#define   DECODE_ENABLE_PARALLEL_PORT3	BIT(3)
+#define   DECODE_ENABLE_PARALLEL_PORT4	BIT(4)
+#define   DECODE_ENABLE_PARALLEL_PORT5	BIT(5)
+#define   DECODE_ENABLE_SERIAL_PORT0	BIT(6)
+#define   DECODE_ENABLE_SERIAL_PORT1	BIT(7)
+#define   DECODE_ENABLE_SERIAL_PORT2	BIT(8)
+#define   DECODE_ENABLE_SERIAL_PORT3	BIT(9)
+#define   DECODE_ENABLE_SERIAL_PORT4	BIT(10)
+#define   DECODE_ENABLE_SERIAL_PORT5	BIT(11)
+#define   DECODE_ENABLE_SERIAL_PORT6	BIT(12)
+#define   DECODE_ENABLE_SERIAL_PORT7	BIT(13)
+#define   DECODE_ENABLE_AUDIO_PORT0	BIT(14)
+#define   DECODE_ENABLE_AUDIO_PORT1	BIT(15)
+#define   DECODE_ENABLE_AUDIO_PORT2	BIT(16)
+#define   DECODE_ENABLE_AUDIO_PORT3	BIT(17)
+#define   DECODE_ENABLE_MIDI_PORT0	BIT(18)
+#define   DECODE_ENABLE_MIDI_PORT1	BIT(19)
+#define   DECODE_ENABLE_MIDI_PORT2	BIT(20)
+#define   DECODE_ENABLE_MIDI_PORT3	BIT(21)
+#define   DECODE_ENABLE_MSS_PORT0	BIT(22)
+#define   DECODE_ENABLE_MSS_PORT1	BIT(23)
+#define   DECODE_ENABLE_MSS_PORT2	BIT(24)
+#define   DECODE_ENABLE_MSS_PORT3	BIT(25)
+#define   DECODE_ENABLE_FDC_PORT0	BIT(26)
+#define   DECODE_ENABLE_FDC_PORT1	BIT(27)
+#define   DECODE_ENABLE_GAME_PORT	BIT(28)
+#define   DECODE_ENABLE_KBC_PORT	BIT(29)
+#define   DECODE_ENABLE_ACPIUC_PORT	BIT(30)
+#define   DECODE_ENABLE_ADLIB_PORT	BIT(31)
+
+#define LPC_IO_OR_MEM_DECODE_ENABLE	0x48
+
+#define LPC_TRUSTED_PLATFORM_MODULE	0x7c
+#define   TPM_12_EN			BIT(0)
+#define   TPM_LEGACY_EN			BIT(2)
+
 #define SPIROM_BASE_ADDRESS_REGISTER  0xA0
 #define SPI_ROM_ENABLE                0x02
 #define SPI_BASE_ADDRESS              0xFEC10000
@@ -63,6 +103,7 @@ static inline int hudson_ide_enable(void)
 
 void hudson_lpc_port80(void);
 void hudson_pci_port80(void);
+void hudson_lpc_decode(void);
 void hudson_clk_output_48Mhz(void);
 
 void hudson_enable(struct device *dev);