diff options
Diffstat (limited to 'src/soc')
| -rw-r--r-- | src/soc/amd/cezanne/early_fch.c | 10 | ||||
| -rw-r--r-- | src/soc/amd/picasso/early_fch.c | 6 | ||||
| -rw-r--r-- | src/soc/amd/stoneyridge/bootblock.c | 10 |
3 files changed, 13 insertions, 13 deletions
diff --git a/src/soc/amd/cezanne/early_fch.c b/src/soc/amd/cezanne/early_fch.c index 16a8a53c75..cdb871b916 100644 --- a/src/soc/amd/cezanne/early_fch.c +++ b/src/soc/amd/cezanne/early_fch.c @@ -13,12 +13,12 @@ #include "chip.h" -/* This table is for the initial conversion of all SCL pins to input with no pull. */ +/* Table to switch SCL pins to outputs to initially reset the I2C peripherals */ static const struct soc_i2c_scl_pin i2c_scl_pins[] = { - { PAD_GPI(I2C0_SCL_PIN, PULL_NONE), GPIO_I2C0_SCL }, - { PAD_GPI(I2C1_SCL_PIN, PULL_NONE), GPIO_I2C1_SCL }, - { PAD_GPI(I2C2_SCL_PIN, PULL_NONE), GPIO_I2C2_SCL }, - { PAD_GPI(I2C3_SCL_PIN, PULL_NONE), GPIO_I2C3_SCL }, + { PAD_GPO(I2C0_SCL_PIN, HIGH), GPIO_I2C0_SCL }, + { PAD_GPO(I2C1_SCL_PIN, HIGH), GPIO_I2C1_SCL }, + { PAD_GPO(I2C2_SCL_PIN, HIGH), GPIO_I2C2_SCL }, + { PAD_GPO(I2C3_SCL_PIN, HIGH), GPIO_I2C3_SCL }, }; static void reset_i2c_peripherals(void) diff --git a/src/soc/amd/picasso/early_fch.c b/src/soc/amd/picasso/early_fch.c index 110718e2e1..048ce12819 100644 --- a/src/soc/amd/picasso/early_fch.c +++ b/src/soc/amd/picasso/early_fch.c @@ -15,10 +15,10 @@ #include "chip.h" -/* This table is for the initial conversion of all SCL pins to input with no pull. */ +/* Table to switch SCL pins to outputs to initially reset the I2C peripherals */ static const struct soc_i2c_scl_pin i2c_scl_pins[] = { - { PAD_GPI(I2C2_SCL_PIN, PULL_NONE), GPIO_I2C2_SCL }, - { PAD_GPI(I2C3_SCL_PIN, PULL_NONE), GPIO_I2C3_SCL }, + { PAD_GPO(I2C2_SCL_PIN, HIGH), GPIO_I2C2_SCL }, + { PAD_GPO(I2C3_SCL_PIN, HIGH), GPIO_I2C3_SCL }, /* I2C4 is a peripheral device only */ }; diff --git a/src/soc/amd/stoneyridge/bootblock.c b/src/soc/amd/stoneyridge/bootblock.c index fc4284f502..499ff633d4 100644 --- a/src/soc/amd/stoneyridge/bootblock.c +++ b/src/soc/amd/stoneyridge/bootblock.c @@ -28,12 +28,12 @@ #error "Error: CONFIG_PI_AGESA_CAR_HEAP_BASE must be >= 1MB" #endif -/* This table is for the initial conversion of all SCL pins to input with no pull. */ +/* Table to switch SCL pins to outputs to initially reset the I2C peripherals */ static const struct soc_i2c_scl_pin i2c_scl_pins[] = { - { PAD_GPI(I2C0_SCL_PIN, PULL_NONE), GPIO_I2C0_SCL }, - { PAD_GPI(I2C1_SCL_PIN, PULL_NONE), GPIO_I2C1_SCL }, - { PAD_GPI(I2C2_SCL_PIN, PULL_NONE), GPIO_I2C2_SCL }, - { PAD_GPI(I2C3_SCL_PIN, PULL_NONE), GPIO_I2C3_SCL }, + { PAD_GPO(I2C0_SCL_PIN, HIGH), GPIO_I2C0_SCL }, + { PAD_GPO(I2C1_SCL_PIN, HIGH), GPIO_I2C1_SCL }, + { PAD_GPO(I2C2_SCL_PIN, HIGH), GPIO_I2C2_SCL }, + { PAD_GPO(I2C3_SCL_PIN, HIGH), GPIO_I2C3_SCL }, }; /* Set the MMIO Configuration Base Address, Bus Range, and misc MTRRs. */ |