diff options
Diffstat (limited to 'src/soc/nvidia/tegra132/mipi_dsi.c')
| -rw-r--r-- | src/soc/nvidia/tegra132/mipi_dsi.c | 85 |
1 files changed, 42 insertions, 43 deletions
diff --git a/src/soc/nvidia/tegra132/mipi_dsi.c b/src/soc/nvidia/tegra132/mipi_dsi.c index bb313f6a34..d273a75419 100644 --- a/src/soc/nvidia/tegra132/mipi_dsi.c +++ b/src/soc/nvidia/tegra132/mipi_dsi.c @@ -105,7 +105,7 @@ int mipi_dsi_host_register(struct mipi_dsi_host *host) /** * mipi_dsi_attach - attach a DSI device to its DSI host - * @dsi: DSI peripheral + * @param dsi: DSI peripheral */ int mipi_dsi_attach(struct mipi_dsi_device *dsi) { @@ -119,7 +119,7 @@ int mipi_dsi_attach(struct mipi_dsi_device *dsi) /** * mipi_dsi_detach - detach a DSI device from its DSI host - * @dsi: DSI peripheral + * @param dsi: DSI peripheral */ int mipi_dsi_detach(struct mipi_dsi_device *dsi) { @@ -134,10 +134,10 @@ int mipi_dsi_detach(struct mipi_dsi_device *dsi) /** * mipi_dsi_enslave() - use a MIPI DSI peripheral as slave for dual-channel * operation - * @master: master DSI peripheral device - * @slave: slave DSI peripheral device + * @param master: master DSI peripheral device + * @param slave: slave DSI peripheral device * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_enslave(struct mipi_dsi_device *master, struct mipi_dsi_device *slave) @@ -156,10 +156,10 @@ int mipi_dsi_enslave(struct mipi_dsi_device *master, /** * mipi_dsi_liberate() - stop using a MIPI DSI peripheral as slave for dual- * channel operation - * @master: master DSI peripheral device - * @slave: slave DSI peripheral device + * @param master: master DSI peripheral device + * @param slave: slave DSI peripheral device * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_liberate(struct mipi_dsi_device *master, struct mipi_dsi_device *slave) @@ -177,16 +177,15 @@ int mipi_dsi_liberate(struct mipi_dsi_device *master, /** * mipi_dsi_dcs_write() - send DCS write command - * @dsi: DSI peripheral device - * @cmd: DCS command - * @data: buffer containing the command payload - * @len: command payload length + * @param dsi: DSI peripheral device + * @param cmd: DCS command + * @param data: buffer containing the command payload + * @param len: command payload length * * This function will automatically choose the right data type depending on * the command payload length. * - * Return: The number of bytes successfully transmitted or a negative error - * code on failure. + * @return The number of bytes successfully transmitted or a negative error code on failure. */ ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, const void *data, size_t len) @@ -261,9 +260,9 @@ ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, /** * mipi_dsi_dcs_exit_sleep_mode() - enable all blocks inside the display * module - * @dsi: DSI peripheral device + * @param dsi: DSI peripheral device * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) { @@ -279,9 +278,9 @@ int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi) /** * mipi_dsi_dcs_set_display_on() - start displaying the image data on the * display device - * @dsi: DSI peripheral device + * @param dsi: DSI peripheral device * - * Return: 0 on success or a negative error code on failure + * @return 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) { @@ -297,11 +296,11 @@ int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi) /** * mipi_dsi_dcs_set_column_address() - define the column extent of the frame * memory accessed by the host processor - * @dsi: DSI peripheral device - * @start: first column of frame memory - * @end: last column of frame memory + * @param dsi: DSI peripheral device + * @param start: first column of frame memory + * @param end: last column of frame memory * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, u16 end) @@ -320,11 +319,11 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, /** * mipi_dsi_dcs_set_page_address() - define the page extent of the frame * memory accessed by the host processor - * @dsi: DSI peripheral device - * @start: first page of frame memory - * @end: last page of frame memory + * @param dsi: DSI peripheral device + * @param start: first page of frame memory + * @param end: last page of frame memory * - * Return: 0 on success or a negative error code on failure. + * @return: 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, u16 end) @@ -343,10 +342,10 @@ int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, /** * mipi_dsi_dcs_set_tear_on() - turn on the display module's Tearing Effect * output signal on the TE signal line. - * @dsi: DSI peripheral device - * @mode: the Tearing Effect Output Line mode + * @param dsi: DSI peripheral device + * @param mode: the Tearing Effect Output Line mode * - * Return: 0 on success or a negative error code on failure + * @return 0 on success or a negative error code on failure */ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, enum mipi_dsi_dcs_tear_mode mode) @@ -363,12 +362,12 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, } /** - * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image + * @brief mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image * data used by the interface - * @dsi: DSI peripheral device - * @format: pixel format + * @param dsi: DSI peripheral device + * @param format: pixel format * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) { @@ -385,17 +384,17 @@ int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format) /** * mipi_dsi_dcs_set_address_mode() - sets the data order for forward transfers * from the host to the peripheral - * @dsi: DSI peripheral device - * @reverse_page_address: reverses the page addressing to bottom->top - * @reverse_col_address: reverses the column addressing to right->left - * @reverse_page_col_address: reverses the page/column addressing order - * @refresh_from_bottom: refresh the display bottom to top - * @reverse_rgb: send pixel data bgr instead of rgb - * @latch_right_to_left: latch the incoming display data right to left - * @flip_horizontal: flip the image horizontally, left to right - * @flip_vertical: flip the image vertically, top to bottom + * @param dsi: DSI peripheral device + * @param reverse_page_address: reverses the page addressing to bottom->top + * @param reverse_col_address: reverses the column addressing to right->left + * @param reverse_page_col_address: reverses the page/column addressing order + * @param refresh_from_bottom: refresh the display bottom to top + * @param reverse_rgb: send pixel data bgr instead of rgb + * @param latch_right_to_left: latch the incoming display data right to left + * @param flip_horizontal: flip the image horizontally, left to right + * @param flip_vertical: flip the image vertically, top to bottom * - * Return: 0 on success or a negative error code on failure. + * @return 0 on success or a negative error code on failure. */ int mipi_dsi_dcs_set_address_mode(struct mipi_dsi_device *dsi, bool reverse_page_address, |